Hot-rolled strip / sheet produced using soft steels for cold forming DIN EN Name Mechanical Properties Chemical Properties. R m [%] C. [%] max.
|
|
- Dwain Dorsey
- 5 years ago
- Views:
Transcription
1 RODUT RANGE 1. Hot-Rolled tip and heet oft Gades Hot-olled stip / sheet poduced using soft steels fo cold foming DIN EN Name Mechanical opeties hemical opeties EN ,0 < e < 2 2 < e < 11 1,5 < e < 2 2 < e < 3 DD to to ,12 0,60 0,045 0,045 DD to to ,10 0,45 0,035 0,035 DD to to ,08 0,40 0,030 0,030 DD to to ,08 0,35 0,025 0,025 1 Ma = 1 N/mm² Mico-alloyed Gades Hot-olled flat steel poducts with high yield stength fo cold foming DIN EN T1 - T3 Name Mechanical opeties hemical opeties Min. A min EN < 3 < 3 Lo=80 Lo=5,65 mm o 315 M to ,12 1,3 0,5 0,025 0,02 0,015 0,09 0,2 0, M to ,12 1,5 0,5 0,025 0,02 0,015 0,09 0,2 0, M to ,12 1,6 0,5 0,025 0,015 0,015 0,09 0,2 0, M to ,12 1,6 0,5 0,025 0,015 0,015 0,09 0,2 0, M to ,12 1,7 0,5 0,025 0,015 0,015 0,09 0,2 0,15 1 Ma = 1 N/mm² tuctual teel i Hot-olled poducts poduced fom non-alloy stuctual steels DIN EN Name Mechanical opeties hemical opeties Min. EN < JR to to to 26 0,19 1,50 0,045 0,045 0,014 0,60 235J to to 510 0,19 1,50 0,040 0,040 0,014 0,60 235J to to to 24 0,19 1,50 0,035 0,035 0,60 275JR to to to 23 0,24 1,60 0,045 0,045 0,014 0,60 275J to to 560 0,21 1,60 0,040 0,040 0,014 0,60 275J to to to 21 0,21 1,60 0,035 0,035 0,60 355JR to to to 22 0,27 0,60 1,70 0,045 0,045 0,014 0,60 355J to to 630 0,23 0,60 1,70 0,040 0,040 0,014 0,60 355J to to 630 0,23 0,60 1,70 0,035 0,035 0,60 355K to to to 20 0,23 0,60 1,70 0,035 0,035 0,60 450J to ,23 0,60 1,80 0,040 0,040 0,027 0,60 1 Ma = 1 N/mm² i Nb V N u FBL 31.0
2 RODUT RANGE Multi-phase teels Hot-olled stip and multi-phase steels fo cold foming DIN EN Name Mechanical opeties hemical opeties EN EN Mateial- N. coss BH₂ coss Rm coss A₈₀ coss n coss i +Mo Nb+ V B HDT450F to ,180 0,500 1,200 0,030 0,010 0,015-0,30 0,05 0,15 0,005 HDT560F to ,180 0,500 1,800 0,025 0,010 0,015-0,30 0,15 0,15 0,005 HDT580X to ,13 0,170 0,800 2,200 0,080 0,015-2,00 1,00 0,15 0,20 0,005 HDT to ,180 0,800 2,200 0,080 0,015-2,00 1,00 0,15 0,20 0,005 HDT to ,180 0,800 2,200 0,080 0,015-2,00 1,00 0,15 0,20 0,005 HDT to ,230 0,800 2,200 0,080 0,015-2,00 1,20 0,15 0,20 0,005 HDT1200M to ,250 0,800 2,200 0,060 0,015-2,00 1,20 0,15 0,22 0,005 ufaces & uing uface Finish pickled (descaled) uface Teatment oiled, non-oiled Non-pickled oiled, non-oiled Othe gades and qualities available on equest Restictions and specifications fo the test diection and exceptions to the ule ae taken fom the applicable standad FBL 31.0
3 RODUT RANGE 2. old-olled heet oft Gades old-olled flat poducts poduced using soft steels fo cold foming DIN EN Name Mechanical opeties hemical opeties EN Max. A80 D to ,12 0,045 0,045 0,60 D to ,3 0,10 0,035 0,035 0,45 D to ,6 0,180 0,08 0,030 0,030 0,40 D to ,9 0,200 0,06 0,025 0,025 0,35 D to ,1 0,220 0,02 0,020 0,020 0,25 0,3 D to ,5 0,230 0,01 0,020 0,020 0,20 0,2 * 1 Ma = 1 N/mm² Mico-alloyed Gades n old-olled flat poducts with a high yield stength fo cold foming poduced fom mico-alloyed steels DIN EN Name Mechanical opeties hemical opeties EN Rp0,2 Ma* coss Ma* oss A80 coss H260LA bis ,10 0,50 1,0 0,030 0,025 0,015 0,15 0,09 H300LA bis ,12 0,50 1,4 0,030 0,025 0,015 0,15 0,09 H340LA bis ,12 0,50 1,5 0,030 0,025 0,015 0,15 0,09 H380LA bis ,12 0,50 1,6 0,030 0,025 0,015 0,15 0,09 H420LA bis ,14 0,50 1,6 0,030 0,025 0,015 0,15 0,09 1 Ma = 1 N/mm² Mico-alloyed Gades old-olled stip and sheet with highe yield stength fo cold-foming fom ephosphoized steels, as well as steels with additional hadening afte bake-hadening EW 094 Name Mechanical opeties hemical opeties EW 094 R e BH Rephosphoized teel Gades ZtE to to ,06 0,50 0,70 0,08 0,030 0,020 ZtE to to ,08 0,50 0,70 0,10 0,030 0,020 ZtE to to ,10 0,50 0,70 0,12 0,030 0,020 teel gades with an incease in the yield stength due to bake hadening ZtE180BH to to ,04 0,50 0,70 0,06 0,030 0,020 ZtE220BH to to ,06 0,50 0,70 0,08 0,030 0,020 ZtE260BH to to ,08 0,50 0,70 0,10 0,030 0,020 ZtE300BH to to ,10 0,50 0,70 0,12 0,030 0,020 tuctual teel i i Geneal stuctual steels to DIN EN Name Mechanical opeties hemical opeties DIN Rp0,2 Ma* Ma* 220GD ,17 0,040 0,035 0, GD ,17 0,040 0,035 0, GD ,17 0,040 0, GD ,20 0,040 0, GD GD N Nb FBL 31.0
4 RODUT RANGE 1 Ma = 1 N/mm² Enamelled cold-olled flat poducts poduced using soft steels fo enamelling DIN EN Name Mechanical opeties hemical opeties EN R e D01EK to ,08 D04EK to ,08 D06EK to ,6 0,02 0,30 D03ED to D04ED to D06ED to ,6 0,02 0,30 ufaces & uing uface Gade uface Finish uface Teatment A (03) Especially smooth b oiled B (05) (not to DIN EN 10268) smooth g non-oiled matte m ough Restictions and specifications fo the test diection and exceptions to the ule ae taken fom the applicable standad FBL 31.0
5 RODUT RANGE 3. Hot-dip Galvanized heet oft Gades ontinuously melted stip and sheet of soft steels fo cold foming DIN EN (Z/ZF/ZA/AZ) Name Mechanical opeties hemical opeties EN10327 EN ymbol fo the type of melt dip coating Rm A80 n i DX51D to DX52D to to DX53D to to DX54D Z, +ZA, 120 to to ,6 0,18 DX54D ZF 120 to to ,4 0,18 DX54D AZ 120 to to DX56D Z, +ZA 120 to to ,9 0,21 DX56D ZF 120 to to ,7 0,20 1 Ma = 1 N/mm² 0,12 0,50 0,60 0,1 0,045 0,30 Mico-alloyed Gades ontinuously melted stip and sheet poduced fom soft steels with a high-tensile stength fo cold foming DIN EN Name Mechanical opeties hemical opeties EN EN ymbol fo the type of melt Mateial - dip coating N. que BH2 Rm que A80 n i Nb HX180YD HX180BD HX220YD HX220BD HX260YD HX260BD HX260LAD HX300YD HX300BD HX300LAD HX340LAD HX380LAD HX420LAD Ma = 1 N/mm² 180 to to ,7 0,18 0,01 0,15 0,70 0,06 0,025 0,12 0, to to ,5 0,16 0,01 0,50 0,70 0,06 0,025 0,015 0,12 0, to to ,5 0,17 0,01 0,20 0,90 0,08 0,025 0, to to ,2 0,15 0,1 0,50 0,70 0,08 0,025 0,015 0,12 0, to to ,4 0,16 0,01 0,25 1,60 0,10 0,025 0,12 0, to to ,1 0,50 0,80 0,10 0,025 0,015 0,12 0, to to ,12 0,50 0,60 0,030 0,025 0,015 0,12 0, to to ,3 0,15 0,01 0,30 1,30 0,10 0,025 0,12 0, to to ,11 0,50 0,80 0,12 0,025 0,015 0,12 0, to to ,11 0,50 1,00 0,030 0,025 0,015 0,15 0, to to ,11 0,50 1,00 0,030 0,025 0,015 0,15 0, to to ,11 0,50 1,40 0,030 0,025 0,015 0,15 0, to to ,11 0,50 1,40 0,030 0,025 0,015 0,15 0,09 B = Bake-hadening = hosphous-alloyed steels Y = Intestitial fee (IF-teel) LA = Low-alloy (mico-alloy) FBL 31.0
6 RODUT RANGE tuctual teel tuctual teel DIN EN Name Mechanical opeties hemical opeties DIN EN Mateial -N. ymbol fo the type of melt dip coating Min. i 220GD GD GD GD ,20 0,60 1,70 0,10 0, GD GD * 1 Ma = 1 N/mm² ufaces & uing Type of melt dip coating Z Hot dip galvanized Zinc coating to DIN EN ZA Galfan Zinc laye with 5% to DIN EN AZ Galvalume Zinc laye with 55%, 1,6% i est zinc to DIN EN ZF Zinc-ion alloycoated Diffusion annealed zinc-ion coating to DIN EN uface type NA: Uninfluenced solidification with diffeent zinc flowe size, usual suface MA: MB: M: RA: RB: R: O O U Tageted influence on solidification with educed zinc flowe size, usual suface Tageted influence on solidification with educed zinc flowe size, cold-olled suface impoved Tageted influence on solidification, cold-olled, best suface Usual uface Impoved uface Best uface uing (uface potection) hemically passivated Oiled hemically passivated and oiled ealed Unteated Restictions and specifications fo the test diection and exceptions to the ule ae taken fom the applicable standad FBL 31.0
7 RODUT RANGE 4. Electoplated Zinc late oft Gades Galvanized cold-olled flat poducts made of steel DIN EN (ZE)/ DIN EN (ZN) Name Mechanical opeties hemical opeties EN Mateial-N D01+ZE to to ,12 0,045 0,045 0,60 D03+ZE to to ,3 0,10 0,035 0,035 0,45 D04+ZE to to ,6 0,160 0,08 0,030 0,030 0,40 D05+ZE to to ,9 0,190 0,06 0,025 0,025 0,35 D06+ZE to to ,8 0,200 0,02 0,020 0,020 0,25 0,3 1 Ma = 1 N/mm² n Mico-alloyed gades, cold-olled flat poducts with high yield stength fo cold foming of mico-alloyed steels DIN EN This standad also applies to electolytically galvanized flat poducts with an additional designation e.g. H260LA + ZE 75/75 Name Mechanical opeties hemical opeties EN Rp0,2 Ma* coss Ma* coss A80 coss i Nb H260LA to ,10 0,50 0,6 0,025 0,025 0,015 0,15 H300LA to ,10 0,50 1,0 0,025 0,025 0,015 0,15 0,09 H340LA to ,10 0,50 1,1 0,025 0,025 0,015 0,15 0,09 H380LA to ,10 0,50 1,6 0,025 0,025 0,015 0,15 0,09 H420LA to ,10 0,50 1,6 0,025 0,025 0,015 0,15 0,09 1 Ma = 1 N/mm² Mico-alloyed gades, cold-olled stip and sheet with highe yield stength fo cold foming fom phosphous-alloyed steels and steels with additional solidification afte heat (bake hadening) EW 094. With an additional designation, this EW also applies to electolytically galvanized flat poducts e.g. ZtE220 + ZE 75/75 Name Mechanical opeties hemical opeties EW 094 R e BH teel gades with phosphous alloy ZtE to to ,06 0,50 0,70 0,08 0,030 0,020 ZtE to to ,08 0,50 0,70 0,10 0,030 0,020 ZtE to to ,10 0,50 0,70 0,12 0,030 0,020 teel gades with an incease in the yield stength due to heat ZtE180BH to to ,04 0,50 0,70 0,06 0,030 0,020 ZtE220BH to to ,06 0,50 0,70 0,08 0,030 0,020 ZtE260BH to to ,08 0,50 0,70 0,10 0,030 0,020 ZtE300BH to to ,10 0,50 0,70 0,12 0,030 0,020 i old-olled flat poducts with high yield stength fo cold foming of mico-alloyed steels DIN EN 10268; with an additional designation. This standad also applies to electolytically galvanized flat poducts e.g. H260LA + ZE 75/ FBL 31.0
8 RODUT RANGE ufaces & uing Type of coating ZE: Electolytically applied pue zinc laye to DIN EN ZN: O O O O U Electolytically applied zinc nickel laye with a nickel content of 10-13% to DIN EN (Neualyt) Vaiants Galvanized - one-sided Galvanized - both-sides Diffeently galvanized Afte Teatment (uface otection) hosphated hosphatized and chemically passivated hemically passivated hosphated, chemically passivated and oiled hemically passivated and oiled hosphated and oiled Oiled Without suface potection Restictions and specifications fo the test diection and exceptions to the ule ae taken fom the applicable standad. Hot Dip uminized heet oft Gades ontinuously hot-olled stip and steel sheet with aluminium-silicon coating (A) DIN EN oft steel fo cold foming Name Mechanical opeties hemical opeties EN10327 EN Mateial - N. ymbol fo the type of melt dip coating Rp0,2 Ma* Ma* A80 n i DX51D A 270 to DX52D A 140 to to DX53D A 140 to to DX54D A 120 to to ,4 0,18 DX56D A 120 to to ,7 0,20 1 Ma = 1 N/mm² 0,12 0,50 0,60 0,1 0,045 0, FBL 31.0
9 RODUT RANGE Mico-loyed Gades ontinuously hot-olled stip and sheet of steels with high yield stength fo cold foming DIN EN Name Mechanical opeties hemical opeties EN EN Mateial - N. ymbol fo the type of melt dip coating Rp0,2 Ma* BH2 Rm Ma* A80 n i Nb HX180YD A 180 to to ,7 0,18 0,01 0,15 0,70 0,06 0,025 0,12 0,09 HX180BD A 180 to to ,5 0,16 0,01 0,50 0,70 0,06 0,025 0,015 0,12 0,09 HX220YD A 220 to to ,5 0,17 0,01 0,20 0,90 0,08 0,025 0,12 HX220BD A 220 to to ,2 0,15 0,1 0,50 0,70 0,08 0,025 0,015 0,12 0,09 HX260YD A 260 to to ,4 0,16 0,01 0,25 1,60 0,10 0,025 0,12 0,09 HX260BD A 260 to to ,1 0,50 0,80 0,10 0,025 0,015 0,12 0,09 HX260LAD A 260 to to ,12 0,50 0,60 0,030 0,025 0,015 0,12 0,09 HX300YD A 300 to to ,3 0,15 0,01 0,30 1,30 0,10 0,025 0,12 0,09 HX300BD A 300 to to ,11 0,50 0,80 0,12 0,025 0,015 0,12 0,09 HX300LAD A 300 to to ,11 0,50 1,00 0,030 0,025 0,015 0,15 0,09 HX340LAD A 340 to to ,11 0,50 1,00 0,030 0,025 0,015 0,15 0,09 HX380LAD A 380 to to ,11 0,50 1,40 0,030 0,025 0,015 0,15 0,09 HX420LAD A 420 to to ,11 0,50 1,40 0,030 0,025 0,015 0,15 0,09 1 Ma = 1 N/mm² tuctual teel ontinuously hot-olled stip and steel sheet with aluminium-silicon coating (A) DIN EN Name Mechanical opeties hemical opeties DIN ymbol fo the type of melt dip coating Rp0,2 Ma* Ma* i 250GD A GD A GD A GD A Ma = 1 N/mm² 0,20 0,60 1,70 0,10 0, FBL 31.0
10 RODUT RANGE ufaces & uing Type of melt dip coating A uminum-silicon alloy with a silicon content of 8-11% to DIN EN A B O O U ufaces Impefections and mino suface defects may be pesent old-olled, impoved suface, mino impefections may be pesent old-olled, best suface Afte Teatment (uface otection) hemically passivated Oiled hemically passivated and oiled Without suface potection Einschänkungen, Vogaben zu üfichtung und Ausnahmeegelungen sind de gültigen Nom zu entnehmen FBL 31.0
Deep Groove Ball Bearings
Deep Goove all eaings Open type Shielded type Sealed type (non-contact) Expansion Compensating eaing 1. Design featues and special chaacteistics Deep goove ball beaings ae vey widely used. A deep goove
More informationTungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
More informationAngles Hot rolled, weldable structural steel sections
Data sheet: E3.1 Angles Hot olled, weldable stuctual steel sections Geneal desciption AceloMittal Steel South Afica, Newcastle Steel poduces an extensive ange of stuctual steel angles. Non-standad sizes
More informationFull complement cylindrical roller bearings
Full complement cylindical olle beaings INTERPRECISE Donath GmbH Osting 2 90587 Obemichelbach Gemany Phone +49-911-76630-0 Fax +49-911-76630-30 info@intepecise.de www.idc-beaings.com Full complement cylindical
More informationHOT-DIP GALVANIZED STEEL STRIP
HOTDIP GALVANIZED STEEL STRIP Range of supply April 2018 voestalpine Steel Division Steel grade Mild steels A 80 A 80 r 90 n 1020/Ag E DX51D Trans. 270 500 22 DX52D Trans. 140 300 270 420 26 DX53D Trans.
More informationSpherical Roller Bearings. NSKHPS, redefining the standard.
Spheical Rolle Beaings NSKHPS, edefining the standad. Continually developing poducts with geate stength and highe accuacy, NSK s new NSKHPS fully incopoate the advantages of NSK s woldclass design, mateials,
More informationCylindrical Roller Bearings
ylindical olle eas ontents Seies M1000, 1200, 1300, 1900, 5200, 5300, 7300 Intoduction... G-1 Pictoial Index... G-3 Selection... G-5 atings... G-7 Dimensions... G-15 Shaft Dimensions... G-25 Housing Dimensions...
More informationLarge Size Tapered Roller Bearings ULTAGE Metric Series
Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies AT. No. 3035/E Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies Lage size tapeed olle beaings (ULTAGE metic seies, OD 270) delive longe life, highe load
More informationCERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
More informationTungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
More informationCONTENTS TECHNICAL CNMG/M DNMG KNUX SNMG/M TNMG VNMG WNMG
CONTENTS NEGATIVE INSERTS POSITIVE INSERTS CNMG/M 80º RHOMB PAGE 01 CCMT PAGE 08 80º RHOMB DNMG 55º RHOMB PAGE 02 DCMT PAGE 09 55º RHOMB KNUX 55º PARALLELOGRAM PAGE 0 RCMT PAGE 10 ROUND SNMG/M 90º SQUARE
More informationUNIWORX PLUS. All-purpose corner radius/high-feed milling cutter for countless finishing options
UNIWORX PLUS Allpupose cone adius/highfeed milling cutte fo countless finishing options uniwox plus cone adius / high feed millng cutte bodies Milling cutte bodies uniwox PLUS univesal cone adius and HIGHfeed
More informationHot-dip galvanised strip products Price extras in Euro/tonne Sector Automotive
Hot-dip galvanised strip products Price extras in Euro/tonne General This document shows price extras only. The invoiced price comprises these extras plus basis price, distribution and tax. Material is
More informationERW construction tubes and pipes
ERW construction tubes and pipes Welded Hollow Rounds Quality according to EN10219. Pieces / Cross - section mm Bundle 0.9 mm 1.2 mm 1.4 mm Φ16 200 0,345 0,451 - Φ21 150 0,465 0,605 0,680 Φ25 150 0,547
More informationNegative Inserts Positive Inserts. Turning Negative Inserts CN 80 Rhombic. Turning Positive Inserts CC, CP 80 Rhombic
uning Indexable s ~88 uning Indexable s Identi cation ystem olo hipbeake election egative s ositive s ow to ead pages of uning s emet / oated abide / abide ineup uning egative s 80 hombic hombic aallelogam
More informationsquareworx For every eventuality: Square shoulder, slotting and chamfering milling with only one insert
squaewox Fo evey eventuality: Squae shoulde, slotting and chamfeing milling with only one inset squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies One fo two: Squae
More informationA.4. INDIVIDUAL PROOF OF WEAPONS
1 A.4. INDIVIDUAL PROOF OF WEAPONS MATERIAL QUALITIY AND WALL THICKNESS OF BARREL AND CHAMBER OF SMALL ARMS - RECOMMENDATION [Minutes XVII, XXIII] 1. Peamble C.I.P. ecognises that the specifications of
More informationNEEDLE BUSHES. Polígono Indutrial O Rebullón s/n Mos - España -
NEELE USHES Polígono Inutial O Rebullón s/n. 36416 - Mos - España - oavigo@oavigo.com Technical featues Neele ushes Neele bushes consist of a thin, heat teate oute ing fome fom accuately contolle sheet
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Polígono Indutial O Rebullón s/n. 36416 - Mos - España - odavigo@odavigo.com Technical featues Pecision combined beaings Types AXN and ARN combined
More informationQuality from The Cutting Edge of Fabrication
Quality from The Cutting Edge of Fabrication TABLE OF CONTENTS PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 DIES - -
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Technical featues Pecision combined beaings Types AXN and ARN combined beaings and thei deivatives consist of a adial needle beaing with cage, in
More informationRoller Bearings for Machine Tools. Precision Ball & Roller Bearings for Machine Tools
Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools CAT. NO. B2005E-1 Catalog Pecision Ball & Rolle Beaings fo Machine Tools Peface
More informationStandard Styles inch/metric
Rolle eaings Radial Cylindical Rolle eaings oe inch: metic: 200 20.0 in. 200 200 mm 42 4.25 in. 210 210 mm 43 4.375 in. 220 220 mm standad sizes standad sizes ae 4-27.20 inch ae 100-600 mm Standad Styles
More informationEaton Aeroquip Triple Crown
Eaton Aeoquip Bette in evey way that mattes Tempeatue Abasion Resistance Eaton engineeing does it again. Select Aeoquip hydaulic hoses, including new MatchMate Global hoses, offe distinct advantages in
More informationCLEAN FITTING (C SERIES / CL SERIES)
N ITTING ( SIS / SIS) pplication - lean ai, Pue wate, Medicinal fluid fo piping eatue - ll of the pats ae washed, assembled and packed in a clean oom and completely oil-fee poducts which did not use any
More informationA Study on Sensor Design for Measurement of Automobile Engine Oil Degradation and Level
2012 IACSIT Coimbatoe Confeences IPCSIT vol. 28 (2012) (2012) IACSIT Pess, Singapoe A Study on Senso Design fo Measuement of Automobile Engine Oil Degadation and Level Jaehwa Kim 1 and Sekwang Pak 2 +
More informationHard metals for precision tools
had mateial mattes Had metals fo pecision tools CERATIZIT - the paent companies Headquates and paent company in MAMER / Luxemboug Paent company in REUTTE / Austia iect sales and distibution patnes 2 Ou
More informationProjects Oil & Gas. Section Sales Programme
Pojects Oil & Gas Section Sales Pogae 1 2 To e ou pefeed supplie & eliale patne fo te suppl of complete and customized stuctual steel packages. celomittal Ou famil celomittal Wit annual acievale poduction
More informationTungsten carbide burrs with CAST cut High-capacity burrs for cast iron
Tungsten cabide bus with cut High-capacity bus fo cast ion Up to 100 % highe stock emoval pefomance in compaison to conventional coss cut bus Significantly inceased aggessiveness, lage chips and vey good
More informationHECKER SEALS FROM A SINGLE SUPPLIER ALL H CKER DICHTUNGS- PLATTEN HECKER PLAQUES D ÉTANCHÉITÉ GASKETS HECKER FOGLI DI GUARNIZIONE ENGLISH
HECKER ALL SEALS FROM A SINGLE SUPPLIER H CKER E GASKETS HECKER DICHTUNGS- PLATTEN HECKER PLAQUES D ÉTANCHÉITÉ HECKER FOGLI DI GUARNIZIONE ENGLISH Estalished in 94 now in its fouth geneation! ³] TABLE
More informationUp to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
More informationSteel. General Product Range
Steel General Product Range Contents 01 Uncoated hot strip 02 Precision strip Legend Availability In stock Available, surface in outer skin quality (O5) Series-manufactured exterior components in primetex
More informationQuality from the Cutting Edge of Fabrication
Quality from the Cutting Edge of Fabrication TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - -
More informationTriple-Sealed Bearings for Bearing Units
Fo New Technology Netwok copoation R Tiple-Sealed eaings fo eaing Units NTN Tiple-Sealed eaings fo eaing Units These eliable tiple-sealed beaings ae dustpoof and watepoof. They ensue a longe beaing life
More informationslotworx Square shoulder face milling and slotting cutters with highly modern cutting edge geometry for universal applications
slotwox Squae shoulde face milling and slotting cuttes with highly moden cutting edge geomety fo univesal applications Object slotwox 177183 squae shoulde face milling cutte bodies milling cutte bodies
More informationRubber Insulating Products, Safety Equipment & Dielectric Testing Services
Rubbe Insulating Poducts, Safety Equipment & Dielectic Testing Sevices Fo Electic Utilities, Contactos, Telecom, Cable Povides and Geneal Industy VOLTGaRD TEST Lab ChaNGE-OuT PROGRam Saf-T-GaRD INTERNaTIONaL
More informationFRICTION POTENTIAL AND SAFETY : PREDICTION OF
BRITE EURAM PROJECT BRPR CT97 0461 FRICTION POTENTIAL AND SAFETY : PREDICTION OF HANDLING BEHAVIOR FLORENCE, FEBRUARY 23 d 2001 Title : Guide Lines fo vehicle design Authos: P.I. Umbeto Delcao, CRF D.Ing.
More informationTechnical Information. Deep Groove Ball Brgs. Angular Contact Ball Brgs. Cylindrical Roller Brgs. Full-Complement Cylindrical Roller Brgs.
Technical Infomation Page No. A7 Tech. Info. Deep Goove all gs. 4 Angula Contact all gs. 20 Cylindical Rolle gs. 44 Full-Complement Cylindical Rolle gs. 78 Tapeed Rolle gs. 96 Spheical Rolle gs. 286 Thust
More informationMini-V Precise Turning, Grooving, Threading & Face Grooving
INERNAL MACHINING Mini-V Pecise uning, Gooving, heaing & ace Gooving MERIC Innovative Gooving & uning Solutions Mini-V Mini ools fo Small & Meium Boes he Mini-V line by Goovex offes impove solutions fo
More informationDelivery program for steel pipes
Delivery program for steel pipes Table of content Photo: Herrenknecht AG 1. Water-bearing steel tubes 4 EN 10255 EN 10224 2. Seamless steel tubes for pressure purposes 6 EN 10216-1 bzw. EN 10216-3 EN 10216-2
More informationTools for Aluminum. New Expanded Offering. ISO 9001 Certified
Tools for Aluminum New Expanded Offering www.kyocera-sgstool.com ISO 9001 Certified S-CAB HIGH PEFOMANCE END MILLS The original, symmetrical flute design features an engineered flute form that provides
More informationPeeled and Ground Round Steel Bars
pag. 1 of 9 Viale Certosa, 249-20151 Milano Tel: +39 02 30 700 - Fax: +39 02 38000 346 - Mail: commerciale.riva@rivagroup.com Production Units: Malegno (BS), Italy pag. 2 of 9 Products STRUCTURAL AND GENERAL
More informationGRADE 5 FASTENERS CHROMATE INDUSTRIAL CORP. CHROMATE GRADE 5 FASTENERS MEET ALL GRADE 5 SPECIFICATIONS.
GADE 5 FASEES Heat-reated Alloy Steel Minimum 120,000 psi ensile Strength Special Chromate Protective Plating Class 2A Precision olled hreads Excellent Elongation Properties Smooth, Chamfered End Heat
More informationBK-7 Plano Convex Lenses. Specifications & Tolerances
OPTICAL COMPONENTS Simple geneal use positive lenses Focal lengths om 8.0 to 5000mm Anti-Relection coatings available iames om 5.0 to 100mm See o additional poducts Achomatic oublets These ae simple lenses
More informationPANEL SPLICE SEE DETAIL A1.3 FLOATING TRIM SEE DETAIL A1.7 TRIM NOT SHOWN FOR CLARITY
V-7 CAIE 4" MODULE OPTIONAL FLUSH CLOSUE OPTIONAL ECESSED CLOSUE 21 32 " 3 11 32 " 1 1 8 " 5 8 " 1 29 32 " 12 GA HANGE WIE, BY OTHES, NOT BY HUNTE DOUGLAS SEE DETAIL A1.2 TYPICAL SECTION SUSPENSION EQUIEMENTS
More informationPart List ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI. Seat. Armrests. Star Base. Caster. Arm Bolts. Back Bolts (M8 X 15mm) J K.
ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI Pat List Key Desciption Pat Qty. Spae A FUZ5B-LO Backest B FUZ6B-HI Backest C Seat D Amests ( left & ight amest) 2 E Seat Post(Cylinde) F Sta Base G Caste 5 H Am
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings Costs savings though apid beaing eplacement at difficult to access beaing locations Contents Rapid beaing eplacement 2 Cost savings 2 Application examples 2 Replacement fo beaings
More informationmultidec -MULTITASK WILLEMIN-MACODEL NEW PROGRAMM OF TOOL-HOLDERS FOR TURNING AND MILLING MACHINING CENTERS
multidec -MUTITASK NEW POGAMM OF TOO-HODES FO TUNING AND MIING MACHINING CENTES WIEMIN-MACODE THE TOO FO EFFICIENT TUNING OPEATIONS ON MUTITASK MACHINES FOM WIEMIN-MACODE (TYPES 408 MT, 508 MT AND 508
More informationQ TABLE PREVIOUS PAGE F OF CONTENTS NEXT PAGE
TABLE F OF CONTENTS FINDEX A-Z TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS......................... - GENEAL INFOMATION....................... 8 TEMS........................................
More informationLimit Switches Matsushita Electric Works, Ltd. Matsushita Electric Works, Ltd. Limit Switches ARCT1B272E Please contact...
06 07 06 07 Please contact... ARCT1B272E 200609-1YT These mateials ae pinted on ECF pulp. These mateials ae pinted with eath-fiendly vegetable-based (soybean oil) ink. Specifications ae subject to change
More informationmodel H with1920
model with1920 ADA Compliant Chilled Dual Wall-Mount Fountain and Bottle Filler FEATUES & BENEFITS CONSTUCTION 18-gauge Type 304 stainless steel swirl design bowl, 14-gauge Type 304 stainless steel bracket,
More informationDIN EN General
DIN EN 10357 General DIN EN 10357 was developed for seam welded tubes made of stainless steel for pipeline systems in the food, pharmaceutical and chemical industries. DIN EN 10357 (2014-3) replaces DIN
More informationEaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping
More informationMetric Conversion Table
Metic Convesion able decimal sizes inches 1/32.0312.8 mm.0315.9 mm.0354 1.0 mm.0394 1.1 mm.0433 3/64.0469 1.2 mm.0472 1.3 mm.0512 1.4 mm.0551 1.5 mm.0591 1/16.0625 1.6 mm.0630 1.7 mm.0669 1.8 mm.0709 1.9
More information1400 UG PADMOUNT TRANSFORMERS
00 UG PADMOUNT TANSFOMES //0 ~ FA Bay-O-Net Fuse Schedule for Padmount Transformers ~ HB,HB Hillside Barrier ~ UID Padmounted Equipment Identification Tags & Safety Signs ~ UT Single Phase Padmount Transformer
More informationCrossed Roller Bearings. Technical Information.
Cossed Rolle eaings Technical Infomation www.hiwin.tw INDUSTRIE 4.0 est Patne Multi Axis Robot Pick-and-place / Assembly / Aay and packaging / Semiconducto / Electo-Optical industy / Automotive industy
More informationTWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
More informationAIR STANDARD ASSUMPTIONS
AIR SANDARD ASSUMIONS In powe enges, enegy is poided by bung fuel with the system boundaies, i.e., tenal combustion enges. he followg assumptions ae commonly known as the aistandad assumptions: he wokg
More informationInch Series TAPERED ROLLER BEARINGS
Inch Seies APERED ROLLER EARINGS Inch Seies APERED ROLLER EARINGS Publication of New Inch seies apeed Rolle eaing Catalog Allow us to expess ou heatfelt appeciation fo you valuable patonage. At this time
More informationCeramic&Exsev bearing series
Ceamic&Exsev beaing seies Exsev beaings fo use in a vacuum envionment Moe and moe beaings ae being used in exteme special envionments, such as in a vacuum, o in a clean, coosive, o heated place. In some
More informationSAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
More informationmodel SP158.8 FEATURES & BENEFITS OPTIONS SPECIFICATIONS APPLICATIONS Freeze Valve For more information, visit or call (888)
model SP58.8 Freeze Valve FEATUES & BENEFITS OPTIONS For more information, visit www.hawsco.com or call (888) 640-4297. SPEIFIATIONS Model SP58.8, retro-fit freeze valve kit to replace the stainless steel
More informationHUATONG Medium & Low Voltage Power Cables 0.6/1kV~18/30kV According to IEC 60502, 61034, 60754
POWER ABOUT US Huatong Cable Inc. was founded in 1993 in Luoyang, Henan Povince, the veneable histoical capital that has been saced gound since the late Neolithic peiod and known fo its beautiful peonies.
More informationINSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE INSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE
6. PEPAING CABLE FO TEMINATION AND SPLICING PEPAING PIMAY CABLE FO TEMINATION AND SPLICING 6.- 6. PIMAY SPLICES 5 & SPLICES (LC TO LC) ALL VOLTAGES 6.-A 5, 5, 75 & SPLICES (LC TO LC) ALL VOLTAGES 6.-B
More informationSuper precision BearingS
Supe pecision BeaingS SUPER PRECISION BEARINGS Pat1 Contents Pat1. NSK Supe Pecision Beaings Global Suppot Capabilities P6 Development Capabilities P8 Quality Contol and Poduction Capabilities P 4 5 Global
More informationCooper & Turner Ltd STRUCTURAL
Cooper & Turner Ltd STRUCTURAL Page 1 of 6 Dimensions of Fully Threaded Bolts/Setscrews CHARACTERISTIC STANDARD Thread d M12 M16 M20 M24 M30 M36 p (pitch) 1.75 2 2.5 3 3.5 4 a max. 5.3 6 7.5 9 10.5 12
More informationHPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Salzgitter Mannesmann Precision SMP-Group As a leading European manufacturer
More informationtimken MiniatUre and thin-section bearings catalog
cylindical olle beaing catalog timken MiniatUe and thin-section beaings catalog Miniatue and thin-section eaings catalog index Timken Oveview......................................... 2 HOw TO USe THiS
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationOperating Instructions High-pressure pumps
MAXIMATOR HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Opeating Instuctions High-pessue pumps issue 08.2007 MAXIMATOR GmbH Walkeniede Staße 15 D-37449 Zoge Gemany Telefon 0 55 86 /
More informationBORNEBUSCH. Non-ferrous metals. Stock list and material list for cast bronzes and other non-ferrous metals
Non-ferrous metals Stock list and material list for cast bronzes and other non-ferrous metals 30 Non-ferrous metals BORNEBUSCH Table of contents 1. Red bronze (CuSn7ZnPb) 32 1.1 Pipes 33 1.2 Round rods
More informationSupply and dispatch warehouse in the Loh industrial park. Sales, bar steel Jochen Kaiser Tel Fax
Peter Holzrichter GmbH Schönebecker Platz 11 42283 Wuppertal Tel + 49 202 562-0 Fax + 49 202 562-278 info@holzrichter-stahl.de www.holzrichter-stahl.de Supply and dispatch warehouse in the Loh industrial
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationCORCORAN POP. 5,379 DAYTON. Cook. Diamond. Lake. Jubert. Lake. Hayden. French 1 MI SCALE. 7 Lake Laura ELM END PROJECT 1403 SP
BECHTOLD TOY ZANZIBA MI Burschville COCOAN POP., CAIN LANDALE 2 GOODIN ISLAND STEHLE 2 PIONEE.8 2 OLLING T. HILLS Jubert ILLO D. 2 HOSESHOE T. SETTLES MEISTE LAKIN OLD 2 Cook HACKMOE FLETCHE S. Laura XANTHUS
More information1. TYPES AND FEATURES OF ROLLING BEARINGS Part B BEARING HANDLING. Part C ANGULAR CONTACT BALL BEARINGS SPHERICAL ROLLER BEARINGS. Part D.
Pat A 1. TYPES AND FEATURES OF ROLLING EARINGS Pat EARING HANDLING 2.SELECTION OF EARING TYPES 3.SELECTION OF EARING ARRANGEMENT 4.SELECTION OF EARING SIZE 5.SPEEDS 6. OUNDARY DIMENSIONS AND IDENTIFYING
More informationultimate erp From + VAT PKULT30CERPK PKULT30BFFERPK PKULT30BVFERPK PKULT35CERPK PKULT35BFFERPK PKULT35BVFERPK Premier Plus indirect Cylinder From
ING EATCKS HPA OCTOBER 017 espit eco ultimate ep e te PRO1 FILTER WITH SELECTED MODELS Fom 79 ADEY MICRO FILTER WITH SELECTED MODELS Pack 79 +VAT Pack + Filte 670+VAT Pack 610 +VAT 3kW Pack 639+VAT 3kW
More informationDIAL DAMPER REGULATOR SET (1/4 ) Product Data Sheet
DIAL DAMPER REGULATOR SET (/4 ) Elgen s Dial Damper Regulator Set is used for controlling the damper inside the ductwork. /4 regulator sets for dampers up to 0. Quick and easy installation Kit Components
More informationChemical Composition(%)
76 ヤイラカイ憘キコマ-5.in 76 2005-11-25 16:23:17 1. Mateials fo T Tapee olle eaing s Oute ing, Inne ing & olling Elements The most common though-haening steel use fo T olling beaing is a cabon chomium steel containing
More informationSUMMARY INFORMATION. MCC 12.0 RLA 8.6 LRA-Low * LRA-High 45.0 LRA-Half Winding * Med Volts 380 High Volts 420 Phase 3 Frequency 50 RPM *
SUMMAY INFOMATION CM3-0400-TFD Application: Air Conditioning efrigerant: -22 Copelaweld 50 Hz Production Status: Available for sale to all U.S. customers. Please check with your local Copeland representative
More informationWorking Press. (PSI) Min. Burst Pressure. mm in fraction mm in fraction bar psi bar psi Kg/m lbs/ft feet
APPLICATION H1571 Boston Minefoce LOW & MEDIUM HIGH SPECIALTY HOSE ACCESSORRIES & ADAPTERS & Pat Numbe H157112 H157112- H1776/H1777 Boston Pefection 300 Pat Numbe Inne Tube: Modified PVC Reinfocement:
More informationInsulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
More informationPrecision Rolling Bearings
R Pecision Rolling Beaings CAT. No. 226-^/E C O N T E N T S Technical Data NTN PRECISION ROLLING BEARINGS Main Spindle Beaings Ball Scew Suppot Beaings NTN PRODUCTS APPENDIX 1. Classification of Pecision
More informationThe standard cages used are pressed steel cages. Additionally Copper alloy machined cages are also available.
Cylindical Rolle eaings Cylindical Rolle eaings These beaings equie featue high adial load as olles and aceway ae in linea contact. These ae ideal fo applications whee thee is heavy impact o adial loading.
More informationBall & Roller Bearings
all & Rolle eaings CAT. NO. 1E-4 1 Stuctues and types A 1 Outline of selection A 14 3 Selection of type A 16 4 Selection of aangement A 5 Selection of dimensions A 4 ounday dimensions 6 A 46 and beaing
More informationINDEX. HellermannTyton 1
INDEX PODUCTS Styles Determine which shapes suit Pages 2-3 your application and then refer to individual data sheets for appropriate sizes. Dimensions Low Profile Shape Pages 13-21 Bulbous Shapes Pages
More informationHigh-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading
1. Scope and field of application Page 1 of 8 This Technical Data Sheet defines the requirements of high-strength bolt and nut assemblies with calibrated preload, HRC System, hexagon and cup head bolts,
More informationSUPER PRECISION BEARINGS
SUPER PRECISION BEARINGS Intoduction As technologies evolve, all manufactues shae a global esponsibility to espect and potect the envionment. NSK Motion and Contol poducts eflect ou copoate commitment
More informationINSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE INSTALLING 200 AMP PRIMARY SPLICES: LC SHIELDED CABLE TO LC SHIELDED CABLE
6. PEPAING CABLE FO TEMINATION AND SPLICING PEPAING CABLE FO TEMINATION AND SPLICING CETIFICATION EQUIEMENTS TO INSTALL BULK FEEDE SPLICES, TEMINATOS AND ELBOWS 6.- 6.- 6. PIMAY SPLICES 5 & 75 SPLICES
More informationMaterials Services Materials Poland. Carbon steel. Materials and services
Materials Materials Poland Carbon steel Materials and services 2 Contents 3 Carbon steel Materials and services About the company 4 5 Sheets and plates 6 9 Tubes 10 21 Seamless tubes 10 19 Welded tubes
More informationInfinite Thermal Solutions Inc.
Page 51 Pipe Plug & Flange Immesion Heates Tubula heate elements ae bazed o welded in a bass, steel o stainless steel pipe plug o flange plug. Ratings fom 350 watts to 38kw and numeous vaiations and options
More informationMCM CABLE 3/15/2010
00 000 MCM CABLE //00 C UEE Elbow Enclosure - Deadend C UEE Elbow Enclosure - Feed-Through C UP 000 MCM Cable iser ~ UP 000MCM Power Cable iser Grounding Detail N UP 000 MCM Cable iser with Ø Switch N
More informationErmeto Original Tubes
Ermeto Original Tubes R2 General recommendations for tubes 1. Steel types, mechanical properties, contions Steel types, mechanical properties and contions of EO steel tubes Steel type Tensile strength
More informationFirst Floor Plan - EPC105, 111 and 113 Remodel EL POMAR CENTER (EPC) Facilities Services. Scale: As Shown Date: 05/31/17 Drawn by: LCE
E:\Projects\2017 Projects\17014\Drawings\Mechanical\17014 Mechanical.dwg Facilities Services First Floor Plan - EPC105, 111 and 113 emodel EL POMA CENTE (EPC) M1 Leffingwell Consulting Engineers, Inc.
More informationDesigning of railway wheels - Part 1. Finite element method
Designing of ailway wheels - Pat. Finite element method M. Sitaz, A. Sładkowski, K. Bizoń, K. Chuzik Depatment of Railway Engineeing, Silesian Univesity of Technology, Euopean Cente of Excellence, Poland
More informationBall and Roller Bearings
R Ball and Rolle Beaings CAT. NO. 222-)!/E Waanty NTN waants, to the oiginal puchase only, that the deliveed poduct which is the subject of this sale (a) will confom to dawings and specifications mutually
More informationMILD STEEL CHAIN & FITTINGS
MILD TEEL CHAIN & ITTING CHAIN IDENTIICATION 84 PWB GADE L CHAIN 85-86 AMOGALV 86 PWB POO COIL CHAIN 87-88 PLIT LINK 89 PWB Anchor Chain identification Grade L Chain - Chain identification (6.00mm - 22.00mm)
More informationBall Valves. Features
Catalog HY14-252/U Technical Information eries BVMM General Description eries BVMM is a manifold mounted high pressure 414 Bar (6 PI) 2 or 3-way ball valve. Manifold mounting eliminates an external fluid
More informationTHE TCCS SYSTEM UTILIZES A MICROCOMPUTER AND MAINTAINS OVERALL CONTROL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTROL IS GIVEN HERE.
SSTEM OUTLINE THE TCCS SSTEM UTILIZES A MICOCOMPUTE AND MAINTAINS OVEALL CONTOL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTOL IS GIVEN HEE.. INPUT SIGNALS () ATE TEMP. SIGNAL SSTEM THE ATE TEMP. SENSO
More informationOPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE
ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE -800-637-0005 WWW.EUROTECHSEATING.COM ASSEMBLY INSTRUCTIONS CHAIR NAME AND SKU OR MODEL Remove all items fom the caton. Veify all
More information