Peeled and Ground Round Steel Bars
|
|
- Tyrone Jordan
- 5 years ago
- Views:
Transcription
1 pag. 1 of 9 Viale Certosa, Milano Tel: Fax: Mail: commerciale.riva@rivagroup.com Production Units: Malegno (BS), Italy
2 pag. 2 of 9 Products STRUCTURAL AND GENERAL USE NON-ALLOY STEEL EN EN /07 EN /06 NON-ALLOY STEEL FOR HIGH SPEED MACHINING UNI 4838 CASE-HARDENING ALLOY STEEL EN 10084/08 EN /07 QUENCHED AND TEMPERED SPECIAL CARBON STEEL EN /06 EN /07 QUENCHED AND TEMPERED SPECIAL ALLOYED STEEL EN /06 EN /07 MICRO-ALLOYED STEELS ACCORDING TO CUSTOMERS SPECIFICATIONS The peeled round steel bars may be produced according to the following quality standards too: - DIN DIN 1652/1, /2, /3, /4 - DIN 17 - DIN STANDARD DIMENSIONS Ground rounds in bars: Ø mm with progression of 0,01 mm BAR LENGTH 3 7 m SIZE TOLERANCE diameter standard: out of standard : length h8 h7 - h6 k8 - k7 - f7 - f6 - g7 - g6 h9 for rough ground bars commercial 1 m fi xed standard 50 mm fi xed standard 20 mm
3 pag. 3 of 9 BRIGHT LONG PRODUCTS SIZE TOLERANCES Nominal Dimension (mm) > > > > > Class of Tolerances UNI EN h6 g6 h7 k7 h8 k8 h9 k9 h10 k10 h11 k11 h12 h13,009,011,013,016,019,022,005,014,006,017,007,020,009,025,010,029,012,034,015,018,021,025,030,035,016,001,019,001,023,002,027,002,032,002,038,003,022,027,033,039,046,054,022,027,033,039,046,054,036,043,052,062,074,087,036,043,052,062,074,087,058,070,084,100,120,140,058,070,084,100,120,140,090,110,130,160,190,220,090,110,130,160,190,220,150,180,210,250,300,350,220,270,330,390,460,540 STRAIGHTNESS standard : wave 1,5 L for C content 0,25% and 1,0 for C content < 0,25% out of standard : wave 1 or 0,5 SURFACE FINISH standard : out of standard : Ra 1,1 µm for tolerance IT8 Ra 0,8 µm for tolerance IT7 Ra 0,6 µm for tolerance IT6 Ra 0,8 µm for tolerance IT8 Ra 0,6 µm for tolerance IT7 Ra 0,4 µm for tolerance IT6 ENDS APPEARANCE standard : out of standard : - hot sheared - chamfered at 1 end - sawing cold cut SURFACE ASPECT without defects
4 pag. 4 of 9 STRUCTURAL AND GENERAL USE NON-ALLOY STEEL EN (S235JRC, E295GC, E335GC, S355J2C) EN /07 (C10, C15, C16) EN /06 (C35, C40, C45, C55, C60) DESCRIPTION AND APPLICATIONS Base and non-alloy steel quality suitable for construction of structural elements, as welded, bolted, riveted structures for room temperature applications. Non-alloy quality steel, for heat treating, suitable for mechanical applications. N C % Mn % Si % P % S % N % Cr % Mo % Ni % Cr+Mo+Ni % S235JRC ,17 1,40-0,040 0,040 0, E295GC ,045 0,045 0, E335GC ,045 0,045 0, S355J2C ,20 1,60 0,55 0,030 0, C ,07 0,13 0,30 0,60 0,40 0,045 0, C ,12 0,18 0,30 0,80 0,40 0,045 0, C ,12 0,18 0,60 0,90 0,40 0,045 0, C ,32 0,39 0,50 0,80 0,40 0,045 0,045-0,40 0,10 0,40 0,63 C ,37 0,44 0,50 0,80 0,40 0,045 0,045-0,40 0,10 0,40 0,63 C ,42 0,50 0,50 0,80 0,40 0,045 0,045-0,40 0,10 0,40 0,63 C ,52 0,60 0,60 0,90 0,40 0,045 0,045-0,40 0,10 0,40 0,63 C ,57 0,65 0,60 0,90 0,40 0,045 0,045-0,40 0,10 0,40 0,63
5 pag. 5 of 9 MECHANICAL PROPERTIES OF THE PEELED PRODUCT (+ SH) Rp 0,2 (N/mm 2 ) Rm (N/mm 2 )* A 5 % Min >5 0 > 5 S235JRC E295GC E335GC S355J2C C C C C C C C C >5 100 Brinell Hardness HB 0 S235JRC E295GC E335GC S355J2C C C C C C C C C IMPORTANT : The mechanical properties of the table satisfy DIN and UNI standards too.
6 pag. 6 of 9 NON-ALLOY STEEL FOR HIGH SPEED MACHINING UNI 4838 C % Mn % CF35SMn10 0,32 0,39 1,35 1,65 0,30 0,040 0,080 0,130 Si % P % S % MECHANICAL PROPERTIES ON THE PEELED PRODUCT (+SH) CF35SMn10 Thickness Rm HB mm N/mm 2 > IMPORTANT: The mechanical characteristics of the table satisfy the prescriptions of UNI standard too.
7 pag. 7 of 9 CASE-HARDENING ALLOY STEEL EN 10084/08 EN /07 N C % Mn % Si % P % S % Cr % Ni % Mo % 16MnCrS ,14 0,19 1,00 1,30 0,40 0,025 0,020 0,040 0,80 1, MnCrS ,17 0,22 1,10 1,40 0,40 0,025 0,020 0,040 1,00 1, NiCrS ,13 0,19 0,70 1,00 0,40 0,025 0,020 0,040 0,60 1,00 0,80 1,10-20NiCrMoS ,17 0,23 0,65 0,95 0,40 0,025 0,020 0,040 0,35 0,70 0,40 0,70 0,15 0,25 MECHANICAL PROPERTIES Brinell Hardness 16MnCrS5 20MnCrS5 16NiCrS4 20NiCrMoS2-2 Diameter Ø mm On Annealed, Peeled (+A+SH) HB IMPORTANT: The mechanical characteristics of the table satisfy UNI and DIN standards too (qualities 16MnCrS5, 20MnCrS5 e 20NiCrMoS2.2).
8 pag. 8 of 9 QUENCHED AND TEMPERED SPECIAL CARBON STEEL EN /06 EN /07 N C % Mn % Si % P % S % Cr % Mo % Ni % Cr+Mo+Ni % C35E 1,1181 0,32/0,39 0,50/0,80 0,40 0,030 0,035 < 0,40 < 0,100 < 0,40 0,63 C35R 1,1180 0,32/0,39 0,50/0,80 0,40 0,030 0,020/0,040 < 0,40 < 0,100 < 0,40 0,63 C40E 1,1186 0,37/0,44 0,50/0,80 0,40 0,030 0,035 < 0,40 < 0,100 < 0,40 0,63 C40R 1,1189 0,37/0,44 0,50/0,80 0,40 0,030 0,020/0,040 < 0,40 < 0,100 < 0,40 0,63 C45E 1,1191 0,42/0,50 0,50/0,80 0,40 0,030 0,035 < 0,40 < 0,100 < 0,40 0,63 C45R 1,1201 0,42/0,50 0,50/0,80 0,40 0,030 0,020/0,040 < 0,40 < 0,100 < 0,40 0,63 C50E 1,1206 0,47/0,55 0,60/0,90 0,40 0,030 0,035 < 0,40 < 0,100 < 0,40 0,63 C50R 1,1241 0,47/0,55 0,60/0,90 0,40 0,030 0,020/0,040 < 0,40 < 0,100 < 0,40 0,63 C60E 1,1221 0,57/0,65 0,60/0,90 0,40 0,030 0,035 < 0,40 < 0,100 < 0,40 0,63 C60R 1,1223 0,57/0,65 0,60/0,90 0,40 0,030 0,020/0,040 < 0,40 < 0,100 < 0,40 0,63 MECHANICAL PROPERTIES OF THE PEELED PRODUCT (+ SH) C35E C35R C40E C40R C45E C45R C50E C50R C60E C60R > 5 Rp 0,2 (N/mm 2 ) Min Rm ( N/mm 2 )* >16 0 > 5 0 > 5 A 5 % Min Brinell Hardness HB C35E C35R C40E C40R C45E C45R C50E C50R C60E C60R IMPORTANT: The mechanical characteristics of the table satisfy the prescriptions of DIN and UNI standards too.
9 pag. 9 of 9 QUENCHED AND TEMPERED SPECIAL ALLOYED STEEL EN /06 EN /07 N C % Mn % Si % P % S % Cr Mo % V % 34CrS ,30 0,37 0,60 0,90 0,40 0,025 0,020 0,040 0,90 1, CrS ,38 0,45 0,60 0,90 0,40 0,025 0,020 0,040 0,90 1, CrMoS ,22 0,29 0,60 0,90 0,40 0,025 0,020 0,040 0,90 1,20 0,15 0,30-42CrMoS ,38 0,45 0,60 0,90 0,40 0,025 0,020 0,040 0,90 1,20 0,15 0,30-51CrV ,47 0,55 0,70 1,10 0,40 0,025 0,035 0,90 1,20-0,10 0,25 MECHANICAL PROPERTIES Rolled and Peeled (+SH) or Annealed and Peeled (+A+SH) Diameter (mm) Brinell Hardness HB 34CrS CrS CrMoS CrMoS CrV IMPORTANT: The hardnesses of the table satisfy DIN and UNI standards too.
Linear Shafts and Customized Precision Shafts for Linear Motion Systems
Linear Shafts and Customized Precision Shafts for Linear Motion Systems www.nimet.ro / Nimet 2017 where innovation lives Linear Shafts and Customized Precision Shafts for Linear Motion Systems Induction
More informationDelivery program. Carbon steel and stainless steel tubes in a wide range of qualities and dimensions. Distribution
Delivery program Carbon steel and stainless steel tubes in a wide range of qualities and dimensions Distribution Our value proposition The reliable supply of high-quality steel tubes and customized service
More informationCat.LIN1003/EN. Precision shafts for linear motion
Cat.LIN1003/EN Precision shafts for linear motion This technical publication has been produced with a great deal of care and attention and all data has been checked for accuracy. However no liability can
More informationDear Business Partners,
PRODUCT CATALOGUE Dear Business Partners, MERETUK FOREIGN TRADE is an independent steel trading company based in Iskenderun / Hatay / TURKEY. We are involved in trading and marketing of long, tubular,
More informationWe manufacture exactly what you need
Bar peeling We manufacture exactly what you need This is our approach to customers and this is the way we design hard metal parts. Direct contact with our skilled technicians is the way to get it. Discover
More informationFlange Dimensions Based on Tables D and E of BS 10 : Common BS 10 Table D Dimensions BS 10 Table E Dimensions Flange Size Flange.
BS 10 : 1962 British Standard BS 10 : 1962 - Specification for s and Bolting for Pipes, Valves, and Fittings. This covers plain, boss, integrally cast or forged, and welding neck type flanges, in ten tables.
More informationDelivery program in higher grades
Delivery program in higher grades Qualities. Dimension. Grades. Systems. Service. Steel. Three words that express how we see ourselves as a flexible systems partner, a modern service provider and a reliable
More information*) experts for experts. Seamless and welded cold drawn precision steel tubes. voestalpine Rotec 1
*) experts for experts. Seamless and welded cold drawn precision steel tubes voestalpine Rotec www.voestalpine.com/rotec 1 Innovative and successful solutions are always within your reach with voestalpine
More informationThe Company. We process a wide range of standard and non-standard steel qualities from the areas of carbon steels, tool steels and stainless steels.
The Company Stahlrump has been producing semi-finished steel products in the form of drawn wire, bright bar, cold rolled strip and hardened and tempered strip over 140 years. Stahlrump is renowned for
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationJIS G4051 Carbon steel for Machine Structural Use
JIS G4051 Carbon steel for Machine Structural Use 1. Scope This Japanese Industrial Standard specifies the carbon steels for machine structural use manufactured by hot forming, such as hot rolling or hot
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationSeamless hot rolled tubes and seamless hollow bars
Seamless hot rolled tubes and seamless hollow bars Benteler Distribution Customised steel tube solutions An internationally operating stockholding company of carbon alloy and stainless steel tubes With
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationAvseal II. Blind Sealing Plug
Avseal II Blind Sealing Plug Avseal II The new range of Avseal II blind sealing plugs is unique in the efficient sealing performance provided in lowand high-pressure hole sealing applications. The rapidly
More informationSize Range. Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in. Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in. Hot Worked: 20 mm 450 mm 0.75 in 17.
Bar Size Range Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 15
More informationÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fax: +30 210 5515015 www.elastron.gr elastron@elastron.gr 1 RECTANGULAR HOLLOW SECTIONS (EN 10219) Dimensions Cross
More informationSTEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD.
www.cwrope.com STEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD. Head Office & Factory 1682-4, Songjung-dong, Gangseo-gu, Busan, Korea TEL : 82-51-831-2171 FAX : 82-51-831-2174
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More information(DIN 2448/1629) E355 (St. 52.0) or S355J2H (St. 52.3N),min 27J /-20ºC, Seamless hot rolled cylindertube according EN /2. inw.
Seamless hot rolled cylindertube according EN 10210-1/2 (DIN 2448/1629) E355 (St. 52.0) or S355J2H (St. 52.3N),min 27J /-20ºC, inw. diam H8 Seamless hot rolled cylindertube according EN 10210-1/2 (DIN
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationDelivery program for steel pipes
Delivery program for steel pipes Table of content Photo: Herrenknecht AG 1. Water-bearing steel tubes 4 EN 10255 EN 10224 2. Seamless steel tubes for pressure purposes 6 EN 10216-1 bzw. EN 10216-3 EN 10216-2
More informationThe intelligent stainless steel stock range. Stainless, highly corrosion and heat resistant steels
The intelligent stainless steel stock range Stainless, highly corrosion and heat resistant steels A material grade makes history. Even at the end of the 19th century it was discovered that the corrosion
More informationW Straight to success
Precision brass rod W5000 - Straight to success Production from one batch We have installed a state of the art brass rod manufacturing plant for high-precision machining. All operations starting with the
More informationare widely used because they provide a standardized surface for testing.
Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at
More informationARCELORMITTAL TUBULAR PRODUCTS IASI Product portfolio European standards
ARCELORMITTAL TUBULAR PRODUCTS IASI Product portfolio European standards 1 ARCELORMITTAL TUBULAR PRODUCTS IASI 1. TUBES FOR INSTALLATIONS - EN 10255 - Unalloyed steel pipes for welding and threading -
More informationSealing surface pressure and bolt force
Printed in Germany 04/06 39-00004-01 REINZ-Dichtungs-GmbH Reinzstraße 3-7 89233 Neu-Ulm Deutschland Phone +49(0) 731-7046-777 Fax +49(0) 731-7046-399 www.reinz.com Sealing surface pressure and bolt force
More informationGUNMETAL BRONZE LEADBRONZE ALUMINIUMBRONZE Bars and tubes in bronzealloys
page 1 GUNMETAL BRONZE LEADBRONZE ALUMINIUMBRONZE Bars and tubes in bronzealloys EN 1982: Gunmetal Bronze Leadbronze Rund bars - continuous cast.................................... page 2 Spuare bars -
More informationDelivery program. Carbon steel and stainless steel tubes as well as piston products
Delivery program Carbon steel and stainless steel tubes as well as piston products About us BENTELER Distribution is one of the leading international operating stockholding and processing companies of
More information*) experts for experts. Seamless and welded cold drawn precision steel tubes
*) experts for experts. Seamless and welded cold drawn precision steel tubes 1 Innovative and successful solutions are always within your reach with voestalpine Rotec, your reliable partner with professional
More informationAvseal II Blind Sealing Plug
Avseal II Blind Sealing lug Since 1922 Since 1936 2010 Avseal II The new range of Avseal II blind sealing plugs is unique in the efficient sealing performance provided in low- and high-pressure hole sealing
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationTechnical Specification No. M H For the Supply of Solid (mono-block) Wheels
Technical Specification No. M0448 H For the Supply of Solid (monoblock) Wheels August 207 Issue 6 . Scope Solid wheels shall be supplied according to BS EN 3262:2004+A2:20 Standard for forged or rolled
More informationPRECISION GROUND GEARS Spur & Helical Gears
Spur & Helical Gears Description Symbol Unit Equation Normal Module m n Transverse Module m t = m n / cos b Axial Module m x = m n / sin b Normal Pressure Angle a n degrees = 2 Transverse Pressure Angle
More informationHYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E Speed-up and Splitter Gearboxes Contents General Information 4-5 Speed-up Gearboxes Series 60000-10 kw
More informationRAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
More informationHydraulic and pneumatic lines EN Zista and Zistaplex
Cold finished seamless tubes Hydraulic and pneumatic lines EN 10305-4 Zista and Zistaplex Distribution Benteler Distribution Customised steel tube solutions An internationally operating stockholding company
More informationDIN EN General
DIN EN 10357 General DIN EN 10357 was developed for seam welded tubes made of stainless steel for pipeline systems in the food, pharmaceutical and chemical industries. DIN EN 10357 (2014-3) replaces DIN
More informationMW50 HYDRAULIC MOTORS
MW50 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G CHARACTERISTICS Motor inertia 1 kg.m² H D S M W 5 0 1 2 3 4 1 2 3 4 1 2 3 3 4 1 2 3 4 5 cm³/tr [cu.in/rev.] Theoretical torque at 100 bar at 1000 SI
More informationThe traction machine bearings generally refer to the following standards: TABLE 1. Sl. No. Reference Document Description
Page 1 of 9 Annexure: 1 1.0 TRACTION APPLICATION REQUIREMENTS: The bearings shall be suitable f specific conditions as characterized below:- 1.1 Extremely heavy impacts and vibrations emanating from the
More informationArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR. Innovative high strength steels for economical steel structures
ArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR Innovative high strength steels for economical steel structures Shanghai World Finance Center, P.R. China Innovative high strength
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationEXPORTERS OF ENG MATERIALS & FABRICATIONS
EXPORTERS OF ENG MATERIALS & FABRICATIONS Certificate of Registration This is to certify that the Quality Management System of UK Steel Exports Limited Blackvein Industrial Estate, Cross Keys, Newport,
More informationHPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Salzgitter Mannesmann Precision SMP-Group As a leading European manufacturer
More informationThe Amodil Group. Specialists In Stainless Steel Long Products
Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless
More informationRAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
More informationSTEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD.
STEEL WIRE ROPE HIGH CARBON WIRE COLD DRAWN STEEL BAR CHUNG WOO ROPE CO., LTD. Head Office & Factory Yangsan Office & Factory, Songjungdong, Gangseogu, Busan, Korea 503, Dukgyeodong, Yangsan, Kyeongnam,
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationBOCCOLE ERNESTO RAAB SRL
C A BOCCOLE T A L O G O NESTO RAAB SRL Via Ghisalba,3-2002 Ospiate di Bollate (MILANO) Tel.: 023830375 - Fax : 0238303207 http://www.ernestoraab.it e-mail: cuscinetti@ernestoraab.it Internal clearance
More informationiglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
More informationCelsius 355 NH technical guide Structural hollow sections
Celsius 355 NH technical guide Structural hollow sections Contents 03 Introduction 04 echnical data 08 Size range charts 12 Sectional properties Celsius 355 Circular 16 Sectional properties Celsius 355
More informationRaw Material and Energy Surcharges USD/lb.
If an alloy you purchase is not listed, call Carpenter within the U.S. at 800-654-6543. Outside the U.S., call 1-610-208-2000, press 2 for Customer Service. Chrome-based (powder products) CarTech Micro-Melt
More informationCOMPONENTS FOR WATERJET
COMPONENTS FOR WATERJET Easy to use, up to 101.500 psi (7.000 bar) & customizable features Based on a long-term cooperation with machines manufactures and users from all over the world, we have developed
More informationFor Extra Large Pitches METRIC
or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited
More informationForklift Profiles. Mast sections and fork arm flats for material handling equipment
Forklift Profiles Mast sections and fork arm flats for material handling equipment Introducing British Steel British Steel is one of the leading steel manufacturers in Europe, producing around 3 million
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More informationBevel gearboxes. Catalogue
Bevel gearboxes Catalogue INDEX Bevel gearbox description... page 2 Manufacturing features... page 2 Materials and components... page 4 Bevel gearbox selection... page 5 Thermal power limit... page 7
More informationB368E MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING
MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING 2017.11 B368E MS DRILL SOLID CARBIDE DRILL SERIES A new choice of quality tooling for a superior cost peformance ratio. A versatile combination of reliable
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationLeading in Welded Bellows Technology. List of components
Leading in Welded Bellows Technology List of components Contents Welded Bellows Material 316L Material AM350 Noncircular membrane bellows (special shapes) Technical Manual Bellows movements (axial, lateral,
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationARI-Strainer PN63-160
ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +
More informationPRESSURE REDUCING AND DESUPERHEATING STATIONS SERIES
PRESSURE REDUCING AND DESUPERHEATING STATIONS 1-5700 SERIES - 2 - I.P. to condenser bypass valve 1-5765 - Inlet: DN 30 ANSI 900 BW - Outlet: DN 60 ANSI 300 BW - Port : 443 mm Body material: SA182 F91 /
More informationTube & Pipe Division
Tube & Pipe Division Cu-Ni / Brass / Al-Brass / Copper CONTENTS 01 GREETINGS 02 HSE STATEMENT 03 MANUFACTURING PROCESS 04 COMPANY PROFILE 05 QUALITY 06 ~ 07 PRODUCTS 08 EUROPE STANDARD 09 USA STANDARD
More informationUniversal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
More informationSeamless Stainless Instrumentation Tubing
Seamless Stainless Instrumentation Tubing Headline About MST Our Profile Mannesmann Stainless Tubes has one of the largest product portfolios in this sector and 125 years of history that dates back to
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationPortable Hardness Tester TIME Ultrasonic Contact Impedance (UCI) Method
Portable Hardness Tester TIME5620 -Ultrasonic Contact Impedance (UCI) Method Larger, clear screen displays probe information, battery information, the average, maximum, minimum readings of select hardness
More informationASSEMBLY SPARE PARTS LIST
ASSEMBLY SPARE PARTS LIST Conversion kit RT/5200 3 rd point hitch manual fold into RT/5200 3 rd point hitch hydraulic fold part no 230.197 Conversion kit RT/5200 3 rd pull type manual fold into RT/5200
More informationPTFE SELF-LUBRICATE BEARING
PTFE SEF-UBRICATE BEARING About US SAIBO is one of world recognized leaders in design and manufacturing of low friction linear motion components and precision bearings. SAIBO products are exported to
More informationServomechkaramoottorit
Solutions for power transmission Servomechkaramoottorit www.konaflex.fi INDEX 1 Servomech 1. THE PRODUCT 1.1 SERVOMECH Linear Actuators......................... Page 2 1.2 SERVOMECH Linear Actuators range............................
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More information2 THIELE Chain Company Drop Forging
Forged Link Chains All information given is based on our current knowledge and expertise and is supplied without obligations or commitments. This also applies to the patent rights of third parties. Neither
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationHigh-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
More informationInoxSabiana 50 Flues Stainless Steel Double Wall ENVIRONMENTAL COMFORT
Flues Stainless Steel Double Wall ISO 9001 - Cert. n 0545/4 Unit heaters Radiant panels Fan coils Air handling units Flues ENVIRONMENTAL COMFORT Introduction and main constructional characteristics Double
More informationPower Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 318 Overview 319
More informationProduct Catalog. GREENTOOL Co.,Ltd. Carbide End Mill GT Series. Flute shape corresponding to work Materials!! Coating excellent in durability!!
GREENTOOL Co.,Ltd. Product Catalog Carbide End Mill GT Series Point 1 Point 2 Point 3 Flute shape corresponding to work Materials!! Coating excellent in durability!! Possible change order of specification!!
More informationMATERIALS & STANDARDS
GLAUNACH THE SILENCER HANDBOOK MATERIALS & STANDARDS ENSURING SUISTAINABLE QUALITY AND SAFETY IN OPERATION GLAUNACH GMBH 2010 ALL RIGHTS RESERVED Part V page 2 of 7 1. SILENCER STANDARD MATERIALS All materials
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationDESFLEX COMPACT FLANGES
DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when
More informationPRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH INDEX 01. HOT ROLLED REINFORCING BARS PAGE 4 02. WIRE ROD PAGE 6 03. BILLET FROM CONTINUOUS CASTING PAGE 8
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationMPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
More informationData sheet: S3 Bar and structural products Profiles, dimensions & tolerances. Introduction
Data sheet: S3 Bar and structural products Profiles, dimensions & tolerances Introduction ArcelorMittal South Africa, Vereeniging Works produces a wide variety of long and forged products. Products are
More informationTechnical Information Oilite
Technical information - Oilite Lubrication Standard OILITE bearings are impregnated with a highly refined mineral oil to ISO VG (SAE 30) having a high viscosity index and containing anti-oxidant, anti-rust
More informationMATERIAL TEST REPORT/ Q.C. DOCUMENTATION MADE IN CANADA
PRODUCT DESCRIPTION: PUP JOINT 3" 1502 X 3FT NACE NK-030511 DATE: MAY 19 2011 C: 0.320 Mn: 0.540 Si: 0.270 Cr: 1.030 Ni: 0.100 Mo: 0.170 Cu: 0.190 P: 0.007 S: 0.002 Sn: V: Al: 0.029 Yield: 84,000 PSI HB
More informationEquipment Welding machine
Equipment Welding machine quasar Speed and ease of use are the unique characteristics of Zhermack s Quasar welding equipment. Quasar and Quasar Plus use the thermal energy produced by an infrared electromagnetic
More informationwww.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
More informationSERIES MULTIPLE NOZZLE DESUPERHEATERS
1-4440 SERIES MULTIPLE NOZZLE DESUPERHEATERS 1-4442 SERIES SPRAYSAT DESUPERHEATERS MAIN FEATURES BODY sizes: water: 1" to 3"; steam: 3", 4" or 6" depending on the selected Cv. connections: ANSI, UNI and
More informationSuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
More informationGSP - High Tech Saws. GSP - High Tech Saws, s.r.o. Hlavní 51, Zborovice CZECH REPUBLIC. saw blades knives cutters
GSP - High Tech Saws GSP - High Tech Saws, s.r.o. Hlavní 51, 768 32 Zborovice CZECH REPUBLIC saw blades knives cutters GSP - High Tech Saws, s.r.o., resident in Zborovice, is a traditional cutting tools
More information- CNG Cylinder Seraj khoy Co. (Manufacturer of Industrial, Medical and CNG cylinders) CNG Cylinder Seraj khoy Co.
- CNG Cylinder Seraj khoy Co. (Manufacturer of Industrial, Medical and CNG cylinders) CNG Cylinder Seraj khoy Co. With the development of the manufacturing industry and increasing demand for green house
More informationFlat products Catalogue. Coils
Flat products Catalogue Coils Sheets Content Ilyich Iron and Steel Works of Mariupol Hot rolled coils according to Ukrainian and the CIS standards...06 according to European standards...08 according to
More informationGalbiati Group / Engineering & Machining Oggiono (Lc) Italy / Via Cà Bianca Pascolo, 26 / Tel / Fax
Galbiati Group is an Italian company, internationally-recognized for the quality of its machining, mechanical engineering, and construction. CHALLENGES TheGroup primarily servesthesteel,energy,astronomy,powertransmission,a
More informationLARGEST STOCK OF METRIC SIZE METALS IN AMERICA
WWW.METRICMETAL.COM METRIC SIZE METALS REFERENCE GUIDE 2009 ISO 9001:2000 Certifi ed LARGEST STOCK OF METRIC SIZE METALS IN AMERICA Our highly trained sales staff is waiting for your calls. With more than
More informationNozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.
... Infinite solutions... Nozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.122 (MAXI) Index 2 4 6 9 11 13 15 19 Model Z.11
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More information