AB41E4-Z Series. Pressure and explosion proof structure d2g4 (flame-proof grade 2, ignitability G4) NC (normally closed) type. Port size: Rc1/4, Rc3/8

Transcription

1 Explosion proof type direct acting port solenoid valve for dry air (general purpose valve) B41E4-Z Series Pressure and explosion proof structure dg4 (flame-proof grade, ignitability G4) Port size: Rc1/4, Rc3/8 JIS symbol OUT IN Common specifications Item Working fluid Working pressure differential range Max. working pressure Withstanding pressure (water) luid temperature mbient temperature Heat proof class tmosphere MPa MPa MPa C C Valve structure Valve seat leakage cm3/min. (NR) Mounting attitude Standard specifications Dry air (atmospheric dew point -60 C or more), inert gas, low vacuum (1.33 x 10 Pa (abs)) 0 to 4 (refer to max. working pressure differential in individual specifications.) to 45 (no freezing) -10 to 45 B Outdoors/flammable (flame-proof grade 1 to, ignitability G1 to G4) Direct acting poppet structure 0. ree Individual specifications Item B41E ****Z --****Z -3-****Z -4-****Z -5-****Z -6-****Z -7-****Z Port size Rc1/4 Rc3/8 *1: The port size symbol is 0 for Rc1/4 (8) and 03 for Rc3/8 (10). *: Voltage fluctuation should be within -10 to +5% of the rated voltage. *3: Keep the leakage current at the following value. *4: ( ) shows options. *5: When using with a low vacuum, vacuum the OUT port side. Orifice (mm) Max. working pressure diff. (MPa) Rated voltage 100 VC 50/60 Hz 00 VC 50/60 Hz (1 VDC) (4 VDC) (48 VDC) (100 VDC) Power consumption (W) 17 Leakage current Voltage 100 VC 00 VC 1 VDC 4 VDC 48 VDC 100 VDC B41E4-*-*-****Z 10 m 5 m 40 m 0 m 10 m 5 m low characteristics Port size Orifice low characteristics (mm) C [dm 3 /(s bar)] b B41E4- -1-****Z ****Z ****Z Rc1/4-4-****Z (1.5) 0.49 (0.47) Rc3/8-5-****Z (1.9) 0.48 (0.47) -6-****Z (.6) 0.4 (0.38) -7-****Z (4.6) 0.9 (0.37) *1: Effective sectional area S and sonic conductance C are converted as S 5.0 C. *: Values shown in ( ) are for stainless steel body. 340

2 B41E4-Z Series How to order B41E4 0 3 H 3 T Z DC4V HNB/G USB/G B/G Port size *1 B Orifice <Example of model number> B41E4-0-3-H5TZ-C100V Series: B41E4 Port size :Rc1/4 B Orifice :ø3 C Body/sealant combination D Type of coil E Junction box Other options G Voltage Note on model no. selection C Body/sealant combination D Type of coil *3 E Junction box *4 *1: G and NPT threads are used for piping port. Contact CKD for details. *: Tropicalization (rust-proof coating) is available as a measure against rust. Contact CKD for more information. Note that the tropicalization is not available when the manual override option is selected. *3: or the heat proof class B diode integrated coil, the C power voltage is converted into a DC coil voltage by the diode. *4: pressure proof packing seal (G3/4) connection is also available. Contact CKD for more information. Note that the conduit connection (G3/4) is not available. *5: The heat proof class B explosion proof coil (D 3) can be used only with 1 VDC, 4 VDC, 48 VDC or 100 VDC. The heat proof class B diode integrated explosion proof coil (D 5) can be used with 100 VC 50/60 Hz or 00 VC 50/60 Hz. *6: Other voltages available are as follows. Contact CKD for more information. 110, 0 VC (with diode) Other options * :Body - brass, sealant - nitrile rubber : diode integrated explosion proof coil dg4 :Conduit (G1/) :Manual override (locking) :100 VC 50/60 Hz G Voltage *5 *6 Symbol Port size 0 Rc 1 / 4 03 Rc 3 / 8 B Orifice ø1.5 ø ø3 ø3.5 ø4 ø5 ø7 Descriptions C Body/sealant combination Body Sealant Treatment Remarks H Nitrile rubber J luoro rubber P Ethylene propylene diene rubber Oil free L Nitrile rubber M luoro rubber R Ethylene propylene diene rubber Refer to page 36 in the Introduction for details on the material combinations. D Type of coil 3 5 Brass Stainless steel G Voltage C100V C00V DC1V DC4V DC48V DC100V explosion proof coil dg4 diode integrated explosion proof coil dg4 E Junction box T Conduit (G1/) L Pressure proof packing seal (G1/) connection, cable OD ø7.5 to 8.4 M Pressure proof packing seal (G1/) connection, cable OD ø8.5 to 9.4 Other options Blank B B No options Manual override (locking) Mounting plate Manual override and mounting plate Std. Option 100 VC 50/60 Hz 00 VC 50/60 Hz 1 VDC 4 VDC 48 VDC 100 VDC 341 GB/G VB WB/G HB LB B G P/ D PK/ DK or dry air Explosion proof HVB/ HVL SB/ SVB NP/NP/ NVP CHB/G MXB/G Other G.P. systems PD/D/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order General purpose valve for dry air Explosion proof direct acting port solenoid valve (dg4)

3 B41E4-Z Series Internal structure and parts list B41E4-Z Series No. Parts name Material 1 Core assembly SUS405 or equivalent, 316, 403 Stainless steel 3 Coil assembly Shading coil Cu (g for stainless steel body) Copper (silver for stainless steel body) 4 Plunger cushion P Tetrafluoroethylene resin Plunger Wear ring Plunger spring SUS405 or equivalent POM SUS304 Stainless steel cetal resin Stainless steel 8 O ring NBR (KM, EPDM) NBR: Nitrile rubber (KM: luoro rubber) 9 Valve sealant NBR (KM, EPDM) (EPDM: Ethylene propylene diene rubber) 10 Body 11 Coil case C3771 (SUS303) DC1 Brass (stainless steel) luminum die casting ( ) shows options. Dimensions Conduit (G1/) type B41E4-*-*- H *T*Z J P G1/ (Conduit thread) C E D B Rc1/4 (0) Rc3/8 (03) M5 depth 8 Set screw B41E4-0-1 to 6- ****Z -0-7 B41E4 ****Z to 7 B C D E

4 B41E4-Z Series Optional dimensions * Refer to the conduit (G1/) type dimensions on the left page for common dimensions. Stainless steel body Pressure proof packing seal (G1/) connection type B41E4-*-*- L -***Z B41E4-*-*-** L/M *Z M N/P R HNB/G USB/G B/G ø30 ø58 ø40 G1/ 58 GB/G VB 10 WB/G 88 HB LB B G B P/ D PK/ DK or dry air Explosion proof B41E4-0-1 to 6- ****Z B41E4 ****Z to 7 Manual override (locking) B41E4-*-*-*** Z ø37.5 ø45 B 11 1 Mounting plate B41E4-*-*-*** B Z HVB/ HVL SB/ SVB NP/NP/ NVP CHB/G MXB/G 6 (70) 50 (58) 18 (18) 4-ø5.5 -ø6 Other G.P. systems PD/D/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order Manual override B41E4-0-1 to 7-***Z B41E to 7-***Z B B Dimensions shown in ( ) are for the mounting plate No.. pplicable model Mounting plate No. 1 Brass body 0 GE B41E to 7- H/J/P Stainless steel body B41E4-0-1 to 6- L/M/R Mounting plate No. Stainless steel body GE B41E L/M/R B41E to 7- L/M/R 343 General purpose valve for dry air Explosion proof direct acting port solenoid valve (dg4)

5 P/PK/D/DK (General purpose valve) General purpose pilot operated port solenoid valve or air, vacuum, water, oil HNB/G USB/G B/G GB/G Overview VB The general purpose valve series enables control of various types of fluids including water, air, oil and vacuums. In addition to the high reliability and high quality of the valve, the variety of options and variations are available. WB/G HB LB B G eatures Various working fluids control Various types of fluids can be handled by selecting the proper body material and sealant. Wide option range Including open frame, coil with diode, and terminal boxes. great variety of series and variation wide selection is available from the Rc1/4 to large 50 flanges with series such as pilot operated diaphragm and piston valves, and pilot kick type diaphragm and piston valves. CONTENTS Series variation 0 Coil selection guide Safety precautions 6 Pilot operated port solenoid valve Piston structure P11/1 / NO (normally open) type 8 P1/ / NO (normally open) type 38 Diaphragm structure D11/1 / NO (normally open) type 48 D1/ / NO (normally open) type 58 Pilot kick type port solenoid valve Piston structure PK11 68 PK1 76 Diaphragm structure DK11/1 / NO (normally open) type 8 PK1 94 Electronic Catalog file list 300 lways read the precautions in the Introduction and page 6 before starting use. 19 P/ D PK/ DK or dry air Explosion proof HVB/ HVL SB/ SVB NP/NP/ NVP CHB/G MXB/G Other G.P. systems PD/D/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order General purpose valve Pilot operated/pilot kick type port solenoid valve

6 Series variation General purpose pilot operated port solenoid valve No. of port port Model P11 P1 P1 P D11 D1 D1 D PK11 PK1 DK11 DK1 Pilot operated (Piston structure) Pilot operated (Diaphragm structure) Pilot kick type (Piston kick drive) DK1 *: 0 mm /s for PK11/1 Series. *1 *1 *1 *1 Structure Pilot kick type (Diaphragm structure) ctuation NO (normally open) type NO (normally open) type NO (normally open) type NO (normally open) type NO (normally open) type ir Low vacuum Water Kerosene (1.33 x 103 Pa [abs]) Working fluid Oil (50 mm /s ) * * Hot water Steam 0

7 Port size Rc1/4 Rc3/8 Rc1/ Rc3/4 Rc1 Rc1 1/4 3 flange Rc1 1/ 40 flange Rc 50 flange *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *4 *3 *3 *4 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 * *3: Refer to each How to order column for the thread types. Refer to page for details on the coil system. Page HNB/G USB/G B/G GB/G VB WB/G HB LB B G P/ D PK/ DK or dry air Explosion proof HVB/ HVL SB/ SVB NP/NP/ NVP CHB/G MXB/G Other G.P. systems PD/D/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order 1 General purpose valve Pilot operated/pilot kick type port solenoid valve

8 Coil selection guide Coil housing types and selection guide wide variety is available to match applications. Refer to the structure and features to select the optimum model. P/D* ppearance Coil variations C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP61 or equivalent Outdoor use not available DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP61 or equivalent Outdoor use not available DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Outdoor use not available Grommet lead wire Lead wire DIN terminal box Lead wire length 300 mm Easy wiring and maintenance Reliable electric protection (ground terminal) Light available (optional - 100, 00 VC and 4 VDC only) Lead wire length 300 mm Conduit (CTC19) for direct conduit wiring can be mounted C 6C E G H 6E 6G 6H 3 DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP1 or equivalent Outdoor use not available Easy wiring Light available (optional - 100, 00 VC / 4, 100 VDC only) 3M 3N DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Outdoor use not available Easy wiring Light available (optional - 100, 00 VC / 4, 100 VDC only) 3I 3J Heat proof class H taped C dedicated (50/60 Hz common) Heat proof temperature 180 C High temperature fluid and high ambient temperature available Outdoor use not available Protection property symbols: IP00 Lead wire Lead wire length 300 mm Conduit (CTC19) for direct conduit wiring can be mounted 4 Open frame type with diode diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Perfect for places where beat can be a problem Outdoor use not available Lead wire Easy wiring Light available (optional - 100, 00 VC only) Lead wire length 300 mm Conduit (CTC19) for direct conduit wiring can be mounted 4M 4N 5 with diode diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP1 or equivalent Perfect for places where beat can be a problem Outdoor use not available Easy wiring Light available (optional - 100, 00 VC only) 5M 5N with diode diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Perfect for places where beat can be a problem Outdoor use not available Easy wiring Light available (optional - 100, 00 VC only) 5I 5J Conduit Use a conduit (CTC19 or G1/) when using direct conduit wiring for the open frame lead wire. G H

9 Repair parts table per coil option Coil option symbol Voltage Repair parts Plunger assembly Core assembly Coil assembly ctuator assembly *1 HNB/G 0 or C C USB/G 6C * DC B/G GB/G E G H E G H 6E 6G 6H * C DC DC VB WB/G HB 3 C DC LB B G 3M 3N 3I 3J 4 C DC C DC C P/ D PK/ DK or dry air Explosion proof HVB/ HVL SB/ SVB NP/NP/ NVP CHB/G 4M 4N C MXB/G Other G.P. systems PD/D/ PJ 5 C CVE/ CVSE CPE/ CPD Medical analysis 5M 5N Custom order 5I 5J C C *1: The actuator assembly includes the coil assembly, core assembly and plunger assembly. *: s 6C, 6E, 6G and 6H are dedicated parts, they are provided as part of the actuator assembly. 3 General purpose valve Pilot operated/pilot kick type port solenoid valve

10 Coil selection guide Coil housing types and selection guide Wide coil variation is available. Refer to the structure and features to select the optimum model. PK11/DK1* ppearance Coil variations C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP61 or equivalent Outdoor use not available DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP61 or equivalent Outdoor use not available Grommet lead wire DIN terminal box Lead wire length 300 mm Easy wiring and maintenance Reliable electric protection (ground terminal) Light available (optional - 100, 00 VC and 4 VDC only) C E G H DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Outdoor use not available Lead wire Lead wire length 300 mm Conduit (CTC19) for direct conduit wiring can be mounted 3 DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP1 or equivalent Outdoor use not available Easy wiring Light available (optional - 100, 00 VC / 4, 100 VDC only) 3M 3N DC and C (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Outdoor use not available Easy wiring Light available (optional - 100, 00 VC / 4, 100 VDC only) 3I 3J *1 Heat proof class H taped C dedicated (50/60 Hz common) Heat proof temperature 180 C High temperature fluid and high ambient temperature available Outdoor use not available Protection property symbols: IP00 Lead wire Lead wire length 300 mm Conduit (CTC19) for direct conduit wiring can be mounted 4 Open frame type with diode diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Perfect for places where beat can be a problem Outdoor use not available Lead wire Easy wiring Light available (optional - 100, 00 VC only) Lead wire length 300 mm Conduit (CTC19) for direct conduit wiring can be mounted 4M 4N 5 with diode diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP1 or equivalent Perfect for places where beat can be a problem Outdoor use not available Easy wiring Light available (optional - 100, 00 VC only) 5M 5N with diode diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Perfect for places where beat can be a problem Outdoor use not available Conduit Easy wiring Light available (optional - 100, 00 VC only) Use a conduit (CTC19 or G1/) when using direct conduit wiring for the open frame lead wire. 5I 5J *1 G H 4 *1: Only DK1* is supported.

11 PK1/DK1 DC and C Heat proof temperature 130 C Protection property symbols: IP65 or equivalent Outdoor use not available Lead wire Lead wire length 300 mm Direct conduit wiring thread CTC19 integrated ppearance 3 HNB/G USB/G B/G GB/G DC and C Heat proof temperature 130 C Protection property symbols: IP1 or equivalent Outdoor use not available Easy wiring Light available (optional - 100, 00 VC / 4, 100 VDC only) 3M 3N VB WB/G HB LB Open frame type Heat proof class H taped with diode C dedicated Heat proof temperature 180 C High temperature fluid and high ambient temperature available Protection property symbols: IP00 Outdoor use not available diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols:ip65 or equivalent Perfect for places where beat can be a problem Outdoor use not available Lead wire Lead wire Lead wire length 300 mm Direct conduit wiring thread CTC19 integrated Easy wiring Light available (optional - 100, 00 VC only) Lead wire length 300 mm Direct conduit wiring thread CTC19 integrated 4 4M 4N 5 B G P/ D PK/ DK or dry air Explosion proof HVB/ HVL SB/ SVB NP/NP/ NVP CHB/G MXB/G with diode diode is mounted on the coil section for direct-current conversion (C-DC conversion) C dedicated (50/60 Hz common) Heat proof temperature 130 C Protection property symbols:ip1 or equivalent Perfect for places where beat can be a problem Outdoor use not available Conduit Easy wiring Light available (optional - 100, 00 VC only) Use a conduit (G1/) when using direct conduit wiring for the open frame lead wire. 5M 5N H Other G.P. systems PD/D/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order 5 General purpose valve Pilot operated/pilot kick type port solenoid valve

12 Safety precautions lways read this section before starting use. Pilot operated port solenoid valve (P/D) and pilot kick type port solenoid valve (PK/DK) Design & Selection WRNING Working fluid (1) When using this valve for dry air or inert gas, the life can be shortened considerably due to wear. Use a valve for dry air. () This valve cannot be used for maintaining the vacuum. CUTION luid viscosity The fluid viscosity must be 50 mm /s. Malfunctions could occur if the viscosity is higher than 50 mm /s. (This value is 0 mm /s for the PK Series.) Leakage current from other fluid control components When operating the solenoid valve with CR circuit a programmable controller, etc., check that the output leakage current from the programmable controller is within the following specifications. Voltage Series no. P, D PK, DK Solenoid valve C C diode DC 100 V 00 V 100 V 00 V 1 V 4 V 6 m 6 m 3 m 3 m m m Triode C switch Programmable controller side 1 m 1 m m m Installation, Piping & Wiring CUTION 1 m 1 m Installation (1) s a general rule, the valve must be installed vertically with the coil facing upward. Piping (1) If the pipe vibrates when the solenoid valve is opened and closed, securely fix the piping. () When passing steam, steam generated from a boiler will contain a large amount of drainage. lways install a drain trap. (3) When passing steam, water replenished to the boiler will contain matters such as "calcium salt" and "magnesium salt". These matters will react with oxygen and carbon oxide causing scales and sludge, so always install a "water softener" and a filter for steam. (4) When the regulator and solenoid valve are directly coupled, the parts could mutually vibrate causing resonance and chattering. (5) If the piping cross-section area on the fluid inlet is reduced, the operation may become unstable due to a differential pressure fault during valve operation. The piping on the fluid inlet must have a size that matches the valve port size. Wiring (1) Refer to page 53 in the Introduction for details on connecting the terminal box. C R Leakage current CUTION When Using 1 Instantaneous leakage With the pilot operated type or pilot kick type port valve, if sudden pressure is applied when the pump starts while the valve is closed, the valve may open for an instant causing fluid to leak. Caution is required during use. Operation Do not apply back pressure. The valve could malfunction. 3 Water hammer If water hammering occurs causing a problem, consider using the CKD "WHL type" or "RSV type" solenoid valve or a motor valve. 4 Manual operation lways observe the following points when using a manual override. <or NO (normally open) type> Opening: Insert a flat-tip screwdriver into the slit on the manual shaft, and turn it approx. 10 to the right or left. The plunger will rise up, and the valve will open. The open state is held even when the screwdriver is removed. lways return the valve to the original position after use. Closing: Turn the manual shaft from the open position to the vertical position. The plunger will lower and the valve will close. (Refer to the following drawings.) C O Valve closed O C Valve opened <or NO (normally open) type> (1) Closing the valve with manual operations The manual shaft is threaded, so hold the manual dial and rotate the shaft clockwise. When the manual dial has been rotated downward 5 to 6 mm and no longer rotates, the solenoid valve will switch to closing operation. () Resetting (when not using manual override) lways rotate the manual dial counterclockwise and return it to the highest point. Manual dial Manual shaft Right-handed thread C O Valve opened 6

13 1 CUTION Maintenance Thermal insulation cover When piping for steam or hot water, etc., use an insulating cover structure that can be disassembled for maintenance purposes. void placing an insulating cover on the entire solenoid valve or on the coil section. The coil could burn. Tightening torque When disassembling or assembling, tighten the body bolt, core assembly and nut with the following tightening torques. HNB/G USB/G B/G GB/G VB WB/G HB P 1 11 D 1 PK11 11 DK P D PK1 DK CUTION Body bolt tightening torque 3 to 4 N m 5 to 7 N m 9 to 1 N m 18 to 8 N m Core assembly tightening torque 30 to 45 N m 45 to 60 N m for PK11-15 to 5 80 to 10 N m Working Environment Nut tightening torque 8 to 16 N m IP65 (IEC6059 (IEC59: )) standards are applied to the test. void use in conditions where water or cutting oil directly contacts the valve. Explanation of protection property symbols and examination method of IP65 Protective structure Note: IP-65 is a standard as followings. IEC (International Electrotechnical Commission) standards IP-** 1st characteristic number (protection grade for foreign solid) Grade 6 Degree of protection Dust proof type Powder and dust do not enter inside. Protection property symbols (International Protection) nd characteristic number (protection grade for entry of water) Grade 5 Degree of protection Protection for jet No harmful effects occur even when water is sprayed with nozzles from all directions. (IEC6059 (IEC59: )) Overview of test method (fresh water is used) Using the following test device, spray water for 1 minute per 1 m of test sample (exterior) surface area from all directions, for a total of 3 minutes or more..5 to 3 m 1.5 L/min. Spray nozzle inner diameter: ø6.3 mm 7 LB B G P/ D PK/ DK or dry air Explosion proof HVB/ HVL SB/ SVB NP/NP/ NVP CHB/G MXB/G Other G.P. systems PD/D/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order General purpose valve Pilot operated/pilot kick type port solenoid valve

14 , 3 port solenoid valve for dry air (general purpose valve) Electronic Catalog file list, 3 port solenoid valve for dry air (general purpose valve) Direct acting port B_Z (pages 316 to 317) DX older name ilename B31-Z B _ Z B31-Z-K/H B31-Z- B31-Z-SUS B41-0-Z B Z B41-03/04-Z B41-Z-K/H B41-0-Z- B Z- B41-0-Z-SUS B Z-SUS B41-03/04-Z-SUS GB3-Z GB3-Z- Mounting plate, cable gland, conduit Direct acting 3 port G_Z (pages 36 to 37) 354 G3-Z G3-Z-K/H G3-Z- G3-Z-SUS G4-0-Z G4-03-Z G4-Z-K/H G4-0-Z- G4-03-Z- G4-0-Z-SUS G4-03-Z-SUS GG3-Z GG3-Z- Mounting plate, cable gland, conduit older name G _ Z ab31 _ z ab31 _ z _ k _ h ab31 _ z _ a ab31 _ z _ sus ab41 _ 0 _ z ab41 _ 0 _ 7 _ z ab41 _ 03 _ 04 _ z ab41 _ z _ k _ h ab41 _ 0 _ z _ a ab41 _ 0 _ 7 _ z _ a ab41 _ 0 _ z _ sus ab41 _ 0 _ 7 _ z _ sus ab41 _ 03 _ 04 _ z _ sus gab3 _ z gab3 _ z _ a ab _ ag _ z _ op DX ilename ag3 _ z ag3 _ z _ k _ h ag3 _ z _ a ag3 _ z _ sus ag4 _ 0 _ z ag4 _ 03 _ z ag4 _ z _ k _ h ag4 _ 0 _ z _ a ag4 _ 03 _ z _ a ag4 _ 0 _ z _ sus ag4 _ 03 _ z _ sus gag3 _ z gag3 _ z _ a ab _ ag _ z _ op Explosion proof direct acting port B*E-Z (pages 34 to 343) older name DX ilename B41E-0-Z B _ E _ Z ab41e _ 0 _ z B41E-0-7-Z ab41e _ 0 _ 7 _ z B41E-0-Z- ab41e _ 0 _ z _ a B41E-03-Z- ab41e _ 03 _ z _ a ccessory (mounting plate, manual mounting plate) a _ e _ f Explosion proof direct acting 3 port G4*E-Z (pages 346 to 347) older name DX ilename G4E-0-Z G _ E _ Z ag4e _ 0 _ z G4E-03-Z ag4e _ 03 _ z G4E-0-Z- ag4e _ 0 _ zva G4E-03-Z- ag4e _ 03 _ z _ a ccessory (mounting plate, manual mounting plate) a _ e _ f Pilot kick type port DK_Z (page 35) DK11-8/10-Z DK11-15-Z DK11-0-Z DK11-5-Z older name DK _ Z DX ilename adk11 _ 8 _ 10 _ z adk11 _ 15 _ z adk11 _ 0 _ z adk11 _ 5 _ z Electronic Catalog file list is applied to "CD DT 006". MICRO CDM ilename (GROUP: CD, USER: STDLIB) CKD-B31-Z CKD-B31-Z-K/H CKD-B31-Z- CKD-B31-Z-SUS CKD-B41-0-Z CKD-B Z CKD-B41-03/04-Z CKD-B41-Z-K/H CKD-B41-0-Z- CKD-B Z- CKD-B41-0-Z-SUS CKD-B Z-SUS CKD-B41-03/04-Z-SUS CKD-GB3-Z CKD-GB3-Z- CKD-B/G-Z-OP MICRO CDM ilename (GROUP: CD, USER: STDLIB) CKD-G3-Z CKD-G3-Z-K/H CKD-G3-Z- CKD-G3-Z-SUS CKD-G4-0-Z CKD-G4-03-Z CKD-G4-Z-K/H CKD-G4-0-Z- CKD-G4-03-Z- CKD-G4-0-Z-SUS CKD-G4-03-Z-SUS CKD-GG3-Z CKD-GG3-Z- CKD-B/G-Z-OP MICRO CDM ilename (GROUP: CD, USER: STDLIB) CKD-B41E-0-Z CKD-B41E-0-7-Z CKD-B41E-0-Z- CKD-B41E-03-Z- CKD-*E- MICRO CDM ilename (GROUP: CD, USER: STDLIB) CKD-G4E-0-Z CKD-G4E-03-Z CKD-G4E-0-Z- CKD-G4E-03-Z- CKD-*E- MICRO CDM ilename (GROUP: CD, USER: STDLIB) CKD-DK11-8/10-Z CKD-DK11-15-Z CKD-DK11-0-Z CKD-DK11-5-Z