Orientation. Abbreviations. Serial Number Break

Transcription

1 P A R T S M A N U A L Printed in USA (9) WSK - / WIL-RICH PO Box 00 Wahpeton, ND 0 PH (0) - Fax (0) - WISHEK PARTS MANUAL 9 /

2 Orientation Any reference to left (L) or right (R) sides or components is to be understood as being viewed from behind the implement and looking forward. Serial Number Break Every implement has a serial number located on the frame. These serial numbers are consecutively assigned to the implements as they are manufactured. To aid in part ordering, we reference to the serial number at the point the change occurred to provide an accurate means of determining the proper parts. Abbreviations ASSY... Assembly BLD...Blade BRKT...Bracket CTR... Center CP... Cup Point (FF)...Female Female GR... Grade of Bolt HD...Heavy Duty HDWE... Hardware INCL... Includes LH... Left Hand (MF)... Male Female MF... Main Frame MTG...Mounting NC... National Course Thread NF...National Fine Thread NPT... National Pipe Thread RH... Right Hand W/... With W/O... Without BLT...Bolt POSLK... Position lock HLK... Hex lock WSHR...Washer ADP...Adapter ELB... Elbow HSE... Hose WHL... Wheel BRG... Bearing BLK...Black SPNDL...Spindle SLTD... Sotted FTG... Fitting GRS... Grease HYD... Hydraulic SEQ... Sequence QTY... Quantity SEC... Section FT... Foot CRG... Carriage DIA...Diameter WISHEK PARTS MANUAL 9 /

3 CONTENTS BLADES...0- BEARINGS...0- BEARING STANDARD SCRAPER...9 CUSHION GANG PARTS... CYLINDERS, FOLD...- CYLINDER, FOLD OVER CENTER LOCK... CYLINDER, LIFT...- DECALS... DEPTH CONTROL...- FRAMES... GANG, CUSHION... GANG, RIGID/ROCK FLEX...0- GANG ATTACHING PARTS... GANGSHAFTS...0-, - HITCHES... HITCH ITEMS... HUBS AND SPINDLES...- HYD. HOSES...-, - JACKS... LEVELING COMPONENTS LEVELING SCREW LIGHT KIT... MISCELLANEOUS... MUD SCRAPER... OVER CENTER LOCK MECHANISM...9- RIMS...9 REAR HITCH... ROTARY SCRAPER...9- RUNNING GEARS...- SCRAPER BAR BRACKET... SCRAPERS...- SINGLE POINT DEPTH CNTRL...- SPOOL SCRAPER... STANDARD SCRAPER... TIRES...9 TRANSPORT LOCKS... UTILITY POLE... WING AXLE ADJUST... WRENCHS... WISHEK PARTS MANUAL 9 /

4 HITCH AND FRAMEWORK ALL NUMBERS BELOW ARE FOR 0 AND NEWER DISCS FOR OLDER PRODUCTION CALL FACTORY FT DISC SHOWN MODEL 09 TO TANDEM HITCH ///// - NT/LNT TO TANDEM HITCH ///// - NT TO TANDEM HITCH ///// - NT TO OFFSET HITCH //// - N OFFSET HITCH /// - N TO OFFSET HITCH / - N OFFSET - NON FOLD X - N TANDEM - NON FOLD - NT/NTC OFFSET - NON FOLD /// - N TANDEM - NON FOLD // - NT TANDEM - NON FOLD / - NT - - TANDEM - FOLD / - NT TANDEM - FOLD ///// - NT TANDEM - FOLD //// - LNT - - TANDEM - FOLD // - LNT OFFSET - FOLD - NOCL - - TANDEM - FOLD / - NT - 90 TANDEM - FOLD / - NT TANDEM - FOLD // - NT - - LEFT WING RIGHT WING DESCRIPTION MODEL 9 TANDEM / - NT - 00 W0 TANDEM /// NT W099 TANDEM // - LNT TANDEM // - LNT TANDEM - LNT - TANDEM - LNT TANDEM / - NT OFFSET - NOCL OFFSET - NOCL TANDEM - NT TANDEM - NT - 0 W0 TANDEM / - NT W0 TANDEM / - NT W0 TANDEM / - NT W090 TANDEM / - LNT TANDEM / - LNT W09 TANDEM - NT - WISHEK PARTS MANUAL 9 /

5 NON-FOLDING RUNNING GEARS A - INCHES B - INCHES C - NUMBER OF SPINDLE BOLT HOLES D- NUMBER OF CYLINDER LUGS E - INCHES PART NO. A B C D E HUB MODEL HOLE LUG. BOLT /NT HOLE LUG. BOLT /N HOLE LUG. BOLT N HOLE LUG. BOLT NT HOLE LUG. BOLT /NT HOLES LUG. BOLT NT HOLE LUG. BOLT /NT HOLE LUG. BOLT N HOLES LUG BOLT /N HOLES LUG BOLT /N - EX HOLES LUG BOLT /NT HOLES LUG. BOLT /N HOLES LUG. BOLT /N - EX HOLES LUG. BOLT /NT HOLES LUG. BOLT NT HOLES LUG. BOLT NTC HOLES LUG. BOLT N HOLES LUG. BOLT N - EX HOLES LUG. BOLT NC HOLES LUG. BOLT NC - EX 0. HOLE LUG. BOLT /N - CHANGE TO -HOLES MID YEAR 00 WISHEK PARTS MANUAL 9 /

6 FOLDING MAIN FRAME RUNNING GEARS A - INCHES B - INCHES C - NUMBER OF SPINDLE BOLT HOLES D- NUMBER OF CYLINDER LUGS E - INCHES PART NO. A B C D E HUB MODEL 9. HOLE LUG. 0 BOLT HOLES - - BOLT NOCL HOLES LUG. 0 BOLT NT HOLES LUG 0. 0 BOLT LNT - 9. HOLES LUG 0. 0 BOLT NT HOLES LUG 9. 0 BOLT NTC HOLES LUG 9. 0 BOLT LNTC HOLES LUG. BOLT NTC LITE HOLE - - BOLT NOCL HOLE LUG. 0 BOLT 0 9. HOLE LUG. BOLT /NT HOLE LUG. BOLT /NT HOLE LUG. 0 BOLT 0 9. HOLE LUG. BOLT /NT HOLE LUG. 0 BOLT HOLE LUG 0. 0 BOLT HOLE LUG. BOLT /NT HOLE LUG. 0 BOLT HOLES LUG. BOLT /NT HOLES LUG. BOLT /NT HOLES LUG. 0 BOLT /LNT HOLES LUG. 0 BOLT /NT HOLES LUG. BOLT /NT HOLES LUG. BOLT /NT HOLES LUG. 0 BOLT /NT HOLES LUG. BOLT NT HOLES LUG. 0 BOLT LNT HOLES LUG 0. BOLT NT HOLES LUG 9. BOLT NTC -0 WISHEK PARTS MANUAL 9 /

7 FOLDING WING RUNNING GEARS LEFT RUNNING GEAR SHOWN A - INCHES B - INCHES C - NUMBER OF SPINDLE BOLT HOLES D - INCHES LH PART # RH PART # A B C D HUB MODEL. 9. HOLE. BOLT HOLE - BOLT NOCL HOLE - BOLT NOCL0-9. HOLES. 0 BOLT /NT - 9. HOLES. 0 BOLT /NT HOLE - BOLT NOCL HOLE - BOLT NOCL HOLE - BOLT NOCL HOLES. 0 BOLT NT - 9. HOLES 0. 0 BOLT NT - 9. HOLES 9. 0 BOLT NTC HOLES. BOLT NTC LITE 00 W00R. 9. HOLE - BOLT NOCL0-00 W00R. 9. HOLE - BOLT NOCL- 0 W0. 9. HOLE ADJ BOLT 000 W000. HOLES ADJ 0 BOLT 0 W0. 9. HOLE. BOLT 09 W HOLE. BOLT 09 W HOLE. 0 BOLT 09 W HOLE 0. BOLT 090 W HOLES. BOLT /NT - 09 W09 9. HOLES. BOLT /NT W HOLES. BOLT NT - 09 W09 9. HOLES 0. BOLT NT - 09 W09 9. HOLES 9. BOLT NTC - WISHEK PARTS MANUAL 9 /

8 WING LEVEL ADJUST NOTE: PRIOR TO LEVELING SCREW (ON AXLE) 0 NUT - -/ NC 00 LONG SLEEVE 00 JAM NUT - -/ NC 00 SHORT SLEEVE 00 SHORT STAND OFF MOUNT 00 LONG STAND OFF MOUNT 00 BASE PLATE 9 09 JAM NUT - NC 0 0 NUT - NC 0 LEVELING SCREW (0. LONG) 90 LELVELING SCREW ( LONG) 0 GREASE FITTING - /-NF 09 WING LEVEL UPDATE KIT (NO JIG) 0 PLACEMENT JIG 00 NOTE: 00 AND LATER WISHEK PARTS MANUAL 9 /

9 LEVELING COMPONENTS Leveling Screw (See Page 0-) Center Frame 0 PIN WING TO MAIN FRAME 9-/ 09 PIN WING TO MAINFRAME -/ 09 / LOCK NUT 0099 HITCH ATTACH PIN - X 9-/ 000 HITCH ATTACH PIN - -/ X 0 BOLT - /NC X -/ 0 HOLE RUNNING GEAR ENDCAP 0999 HOLE RUNNING GEAR ENDCAP 09 CAP ONLY 0 / NF GREASE FITTING 009 LINK N SERIES 9 0 PIN - -/ X -/ 0 0 PIN - X -/ 00 BELLCRANK 09 UTILITY POLE 0 PULL-UP DOG 0 WING LOCK EAR 0 FRAME ANCHOR 00 FRAM E ANCHOR 090 FT/FT CYL ANCHOR 9 0 Wrenches See Pg. SEE PG Hitch See Pg WISHEK PARTS MANUAL 9 /

10 MANUAL LEVELING COMPONENTS TUBE LENGTH LEVELING TUBE ADJUST - - OFFSET FOLD/NON-FOLD, TANDEM NON-FOLD 00 LEVELING TUBE ADJUST - - TANDEM FOLD 09 LEVELING SPRING -. OAL - WINGED UNITS 0 LEVELING SPRING -. OAL - NON-WINGED AFTER LEVELING SPRING - 0 OAL - NON-WINGED BEFORE WASHER WELD 00 TRUNION - AFTER PIVOT ASSY - <, BEFORE PIVOT ASSY - >0, BEFORE LEVELING FLANGE 0-9- IN NUT W/ SET SCREW HOLES 9 IN JAM NUT 00 ADJUSTMENT TUBE - OFFSET, FOLD 00 ADJUSTMENT TUBE - TANDEM, FOLD 009 ADJUSTMENT TUBE - TANDEM, NON-FOLD 00 ADJUSTMENT TUBE - OFFSET, NON-FOLD WISHEK PARTS MANUAL 9 / 0

11 HYDRAULIC LEVELING COMPONENTS 00 TUBE LENGTH 00 LEVELING TUBE ADJUST - - OFFSET FOLD/NON-FOLD, TANDEM NON-FOLD 00 LEVELING TUBE ADJUST - - TANDEM FOLD 09 LEVELING SPRING - - OAL - WINGED UNITS 0 LEVELING SPRING -. OAL - NON-WINGED AFTER LEVELING SPRING - 0 OAL - NON-WINGED BEFORE WASHER WELD 00 TRUNION - AFTER PIVOT ASSY - <, BEFORE PIVOT ASSY - >0, BEFORE LEVELING FLANGE 9 IN NUT 09 IN JAM NUT 009 HYD ADJUSTMENT TUBE - OFFSET, FOLD 00 HYD ADJUSTMENT TUBE - TANDEM, FOLD 00 HYDADJUSTMENT TUBE - OFFSET, NON-FOLD 00 HYD ADJUSTMENT TUBE - TANDEM, NON-FOLD 09 CYLINDER ONLY 0 SEAL KIT - PRINCE 9 SEAL KIT - WISHEK WISHEK PARTS MANUAL 9 /

12 HITCH ITEMS LONG WRENCH SHORT WRENCH 0909 CAT AG HITCH -/ HOLE (HD) CAT AG HITCH / LOCKWASHER 099 PIN LOCK NUT / NC BOLT / X -/ 9 SAFETY CHAIN - 0 TO SAFETY CHAIN - 0 TO 0 A SAFETY CHAIN - TO 9 99 PIN - HITCH JACK 0 00 HITCH JACK MOUNT WELD-ON 0 HITCH JACK (INCLUDES 9&0) (NONFOLD) 09 PIN 0 DROPLEG FOR JACK - 000LB 0 U-BOLT /NC X X - FOR X TUBE HITCH 9 U-BOLT /NC X X - FOR X TUBE HITCH 9 JACK - KLB DROPLEG -FOLD 9 JACK - K W/ U-BOLTS - FOLD / NUT 09 -/ HOLE SPACING 09 HOLE SPACING 0 / NUT 9 0 / LOCK WASHER 0 09 CAT HITCH -/ HOLE SPACING 09 CAT HITCH HOLE SPACING 09 CLEVIS -FOR TRANSPORT ONLY 9 BOLT - / X -/ 00 WASHER - X X / 099 X PIN / X COTTER PIN WISHEK PARTS MANUAL 9 /

13 UTILITY POLE RUBBER RING 9 LIGHT PLUG HOLDER 0 BOLT - / X 90 U-BOLT / X X - FOR X TUBE 0 HOLE PLATE - FOR X TUBE 9 BOLT - / X -/ - FOR X TUBE / FLAT WASHER / LOCK WASHER 0 / NUT OPERATOR S MANUAL TUBE 9 99 BOLT - / X / 0 / FLAT WASHER MANUAL TUBE HOLDER / NUT / LOCK WASHER WISHEK PARTS MANUAL 9 /

14 THIS PAGE LEFT BLANK INTENTIONALLY WISHEK PARTS MANUAL 9 /

15 H - BOLT HUB 0 9 DUST CAP (DC) (. DIA) 0 COTTER PIN - / X -/ SPINDLE NUT - -NF SPINDLE WASHER - WA OUTER BEARING (LM0) OUTER CUP (LM00) WHEEL BOLT - /-0NF HUB ONLY (INCLUDES CUPS) COMPLETE HUB 0 HUB REPAIR KIT (,,,9,0,) 9 9 INNER CUP (LM90) 0 INNER BEARING (LM99) DUST SEAL (9-TA) 9 SPINDLE / X -/ SPINDLE BOLT WISHEK PARTS MANUAL 9 /

16 H - BOLT HUB DUST CAP (DC) (. DIA) 0 COTTER PIN - / X -/ SPINDLE NUT - -NF SPINDLE WASHER - WA OUTER BEARING (LM) OUTER CUP (LM0) WHEEL BOLT- 9/-NF 9 HUB ONLY (INCLUDES CUPS) COMPLETE HUB (H) 0 HUB REPAIR KIT (,,,9,0,) 9 0 INNER CUP (0) 0 INNER BEARING (0) DUST SEAL (9-TA) 9 SPINDLE / X -/ SPINDLE BOLT WISHEK PARTS MANUAL 9 /

17 BOLT HUB DUST CAP 0 COTTER PIN - / X -/ SPINDLE NUT - -NF SPINDLE WASHER - WA OUTER BEARING (90) OUTER CUP (0) 0 STUD NUT 9/ - NF 0 STUD BOLT 9/ - NF 9 0 HUB ONLY (INCLUDES CUPS) COMPLETE HUB 9 HUB REPAIR KIT (,,,0,,) 0900 COMPLETE HUB AND SINGLE END SPINDLE 0 INNER CUP (0) INNER BEARING (0) DUST SEAL (09) 9 DOUBLE END SPINDLE - 9 DOUBLE END SPINDLE DOUBLE END SPINDLE - 09 SINGLE ENDED SPINDLE - 00 SINGLE END SPINDLE SINGLE END SPINDLE - 09 SINGLE END SPINDLE / X -/ SPINDLE BOLT WISHEK PARTS MANUAL 9 /

18 0 BOLT HUB DUST CAP 00 BOLT - DUST CAP - / X / 09 GASKET 0 COTTER PIN - / X -/ 09 SPINDLE NUT - -/ -NF 09 SPINDLE WASHER - / X 09 OUTER BEARING (0) 099 OUTER CUP (A) 9 0 STUD NUT / - NF FLANGE 0 0 HUB ONLY (INCLUDES CUPS) 0 COMPLETE HUB 0 HUB REPAIR KIT (,,,,) 00 COMPLETE HUB AND SPINDLE ASSY 0 STUD BOLT / - NF 000 INNER CUP (90) 0 INNER BEARING (9) 0 DUST SEAL (CR00) W090 SINGLE END SPINDLE - 09 DOUBLE END SPINDLE SINGLE END SPINDLE - 09 DOUBLE END SPINDLE - 00 DOUBLE END SPINDLE / X SPINDLE BOLT WISHEK PARTS MANUAL 9 /

19 RIMS AND TIRES 0 L X TIRE 0.L X TIRE 00 /R. TIRE 0XX - REPLACES./X TIRE (SUBWAY TIRE) 0 TUBE FOR SUBWAY TIRE (NOT SHOWN) 0 LINER FOR SUBWAY TIRE (NOT SHOWN) 0 RIM - X X HOLE (L X ) 0 RIM - X 0 X HOLE (.L X ) 0 RIM - X 0 X HOLE (L X ) 00 RIM -. X. X HOLE (/R.) 0 RIM -. X. X 0HOLE (/R.) 0 SPLIT RIM X HOLE (./R OR 0XX TIRE) - SUBWAY TIRE 0 ASSY - BOLT RIM W/.L X TIRE 0 ASSY - BOLT RIM, SPLIT W/0XX TIRE - REPLACES./ X (SUBWAY TIRE) 00 ASSY - BOLT RIM W//R. TIRE 09 ASSY -0 BOLT RIM W//R. TIRE 9 WISHEK PARTS MANUAL 9 /

20 GANG, RIGID OR ROCK FLEX NOTE: TAPERED/STEP-DOWN/LEVELING BLADE SIZING ON REAR GANG: FLANGE STYLE BEARINGS Torque to at least 000ft/lbs Loosen bearing standard u-bolts before tightening Locate set bolt to gang shaft groove WISHEK PARTS MANUAL 9 / 0

21 GANG, RIGID OR ROCK FLEX 0-9- IN DRILLED NUTWITH SET SCREW 09 END WASHER 09 / SPACER - -/ (IN) 00 / SPACER - -/ (IN) 00 / SPACER - -/ (0IN ) 0 / SPACER - -/ (9IN ) 0 BOLT - / - -/ NC BOLT - / - -/ NC (FOR USE WITH BEARING GUARD) 090 BEARING GUARD - OPTIONAL 0 LOCK WASHER - / 0 NUT - / NC 0 BEARING GUARD WASHER - OPTIONAL ( PER BEARING) 9 0 CAST / SPACER - -/ 0 99 SET BOLT - 9/ X 0 / X SMOOTH BLADE 00 / X 0 SMOOTH BLADE - / X SMOOTH BLADE - / X SMOOTH BLADE 0 / X SMOOTH BLADE 00 / X SMOOTH BLADE 00 / X 0 SMOOTH BLADE -N / X NOTCHED BLADE 0 / X NOTCHED BLADE 000 / X NOTCHED BLADE 00 / X 0 NOTCHED BLADE 00 BEARING STANDARD (/0 BLADE) - -/ 000 BEARING STANDARD (/ BLADE) - -/ 0 U-BOLT / X 0 LOCKWASHER - / 0 NUT - /NC 9 / NPT 90 DEGREE GREASE FITTING 0- BEARING HOUSING 0- BEARING - -/ ID X.9 OD BEARING ASSY (INCL,, ) 9 00 SPACER - SPACING (. ) 0 SPACER - SPACING (0. ) 0 SPACER - 0 SPACING (9. ) 0 SPACER - 9 SPACING (. ) 0 GANG SHAFT --/ - SEE FOLLOWING PAGES 0 END WASHER (/ ) SERIES BEARING (99 AND PRIOR) 0- SERIES BEARING (90-9) 0-90MS 0 BEARING FLANGE SET 0-00MS BEARINGS FLANGE SET ( W/GRS FTG, W/O) ep GREASE (0 PACK) NOTE: FOR GANG SHAFT SIZES NOT SHOWN IN FOLLOWING PAGES, USE FORMULA BELOW: (# BLADES - ) X SPACING (IN INCHES) + = GANG SHAFT LENGTH WISHEK PARTS MANUAL 9 /

22 GANG - SPRING CUSHION T-BOLT - -/ X 9-/ 0 BUSHING 0 /- GREASE FITTING 0 U-BOLT / X X 09 NUT - / LOCK NUT 99 GANG PIN - X 0-/ 09 BOLT - / X NUT - / NC 9 LOCKWASHER - / 0 0 SPRING END CAP 0 HALF NUT -/ 9 BUCKET SPRING - -/ X -/ 0 SPRING BUCKET - /0 BLADES 0 SPRING BUCKET - / BLADES 9 BOLT - / X 9 0 NUT - -/ NC 0 WASHER - -/ 0 U-CLAMP X FRAME (00/00) 0 U-CLAMP X FRAME (00) 0 NUT - NC 9 00 GANG ANGLE ADJUSTER 0 U-CLAMP STOP 0 THREADED PLATE NUT - / NC JAM 9 BOLT - / X FULL THREAD WISHEK PARTS MANUAL 9 /

23 GANG, CUSHION RIGHT HAND SHOWN (NTC MODELS) / X -/ BOLT 0 / NUT 0 / LOCK WASHER 09 C-SPRING PLATE 0 LH C-SPRING 0 RH C-SPRING 0 / X -9/ X U-BOLT 090 BEARING ST WELD 0 / X -/ BOLT 9 GREASE FITTING - /NPT 0 0- SERIES BEARING HOUSING 0- SERIES BEARING 0 / LOCK WASHER 0 / NUT 00 / X X -/ U-BOLT 9 LH SCRAPER BRACKET 9 RH SCRAPER BRACKET 9 / FLANGE NUT / X -/ BOLT WISHEK PARTS MANUAL 9 /

24 GANG SHAFTS WISHEK PARTS MANUAL 9 /

25 GANG SHAFTS WISHEK PARTS MANUAL 9 /

26 GANG SHAFTS WISHEK PARTS MANUAL 9 /

27 GANG SHAFTS WISHEK PARTS MANUAL 9 /

28 GANG SHAFTS # # # # NT/NT FOLDING GANGSHAFT SIZE ACCORDING TO SERIAL NUMBER S/N _ _ _ _ _ _ _ < see note below = SIZE (EX: FT) # # # # Ex. S/N: 09 Model: NT FOLDING Size # # # # # # # # W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 9 W0 0 W0 0 W0 9 0 W0 99 W0 W0 W0 99 W0 W0 0 W0 0 W0 Model: NT FOLDING Size # # # # # # # # W0 0 W0 0 W0 0 W0 0 W0 W0 W0 W0 0 W0 99 W0 W0 W0 99 W0 W0 0 W0 0 W0 WISHEK PARTS MANUAL 9 /

29 GANG SHAFTS 9 WISHEK PARTS MANUAL 9 /

30 GANG SHAFTS WISHEK PARTS MANUAL 9 / 0

31 GANG SHAFTS # # # NT/NTFOLDING GANGSHAFT # SIZE ACCORDING TO SERIAL NUMBER S/N _ _ _ _ _ _ _ < see note below = SIZE (EX: FT) # # # # Ex. S/N: 09 Model: NT FOLDING Size # # # # # # # # W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 9 W0 W0 W0 9 W0 W0 W0 W0 W0 9 W0 W0 W0 9 0 W0 9 W0 W0 W0 9 W0 W0 W0 W0 Model: NT FOLDING Size # # # # # # # # W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 9 W0 W0 W0 9 0 W0 W0 W0 W0 W0 W0 W0 W0 WISHEK PARTS MANUAL 9 /

32 GANG SHAFTS # # # N/NNON FOLDING GANGSHAFT SIZE ACCORDING TO SERIAL NUMBER S/N _ _ _ _ _ _ _ < see note below = SIZE (EX: FT) # Ex. S/N: 09 # NOTE: SOME DISCS HAVE FEWER GANGS. Model: N NON FOLDING Size # # # # # 0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 9 W0 W0 W0 W0 9 W0 0 W0 W0 W0 W0 0 W0 Model: N NON FOLDING Size # # # # # 0 W0 W0 W0 W0 W0 W0 W0 W0 0 W0 W0 W0 W0 9 W0 9 W0 9 W0 9 W0 0 W0 0 W0 0 W0 0 W0 WISHEK PARTS MANUAL 9 /

33 GANG SHAFTS WISHEK PARTS MANUAL 9 /

34 GANG SHAFTS # # # N FOLDING GANGSHAFT SIZE ACCORDING TO SERIAL NUMBER S/N _ _ _ _ _ _ _ < see note below = SIZE (EX: FT) # # Ex. S/N: 09 # Model: N FOLDING Size # # # # # # W0 W0 0 W0 W0 W0 W0 W0 9 W0 0 W0 W0 W0 W0 9 W0 0 W0 0 W0 W0 W0 W0 0 WISHEK PARTS MANUAL 9 /

35 GANG SHAFTS # # # # # # LNT/LNT FOLDING GANGSHAFT SIZE ACCORDING TO SERIAL NUMBER S/N _ _ _ _ _ _ _ < see note below = SIZE (EX: FT) #9 #0 Ex. S/N: 09 # # # # Model: LNT FOLDING Size # # # # # # # # #9 #0 # # W0 0 W0 0 W0 W0 W0 0 W0 0 W0 W0 0 W0 0 W0 0 W0 0 W0 W0 W0 W0 W0 W0 W0 W0 0 W0 0 W0 0 W0 0 W0 0 W0 0 Model: LNT FOLDING Size # # # # # # # # #9 #0 # # W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 0 W0 W0 W0 W0 W0 0 WISHEK PARTS MANUAL 9 /

36 GANG SHAFTS # # # # # # LNT/LNT FOLDING GANGSHAFT SIZE ACCORDING TO SERIAL NUMBER S/N _ _ _ _ _ _ _ < see note below = SIZE (EX: FT) #9 #0 Ex. S/N: 09 # # # # Model: LNT FOLDING Size # # # # # # # # #9 #0 # # W0 0 W0 W0 W0 W0 W0 0 W0 W0 0 W0 0 W0 0 W0 0 W0 W0 W0 0 W0 W0 W0 0 W0 W0 0 W0 0 W0 0 W0 0 W0 0 W0 0 Model: LNT FOLDING Size # # # # # # # # #9 #0 # # W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 W0 0 W0 W0 W0 W0 W0 0 WISHEK PARTS MANUAL 9 /

37 BLADE SCRAPERS CROSSTUBE Spool Scraper (PG. ) Standard Scraper (PG. ) Scraper Retainer (PG. ) Bearing Stand Scraper (PG. 9 ) Rotary Scraper (PG. 9-) 0 U-BOLT / X X 09 /NC FLANGE NUT NON -ROCK FLEX 0909 SCRAPER BAR BRACKET - - BLADES 090 SCRAPER BAR BRACKET - -0 BLADES ROCK-FLEX 0 SCRAPER BAR BRACKET - BLADES - BEND 0 SCRAPER BAR BRACKET - BLADES - BENDS 00 SCRAPER BAR BRACKET - BLADES - BENDS 0 SCRAPER BAR BRACKET - 0 BLADES - BENDS 00 U-CLAMP - / X X -/ 0 U-CLAMP - / X X -/ /NC NUT / LOCK WASHER 00 NOTE:Scraper designation (left or right) refers to direction dirt is thrown from gang blades. Gang illustration above has all left hand scrapers WISHEK PARTS MANUAL 9 /

38 BLADE SCRAPERS Standard Scraper 00 COMPLETE ASSEMBLY NUT - / 0 STANDARD SCRAPER - / 9 BOLT - / X -/ 00 SCRAPER MOUNT 00 U-CLAMP / X X -/ 09 FLANGE NUT - / NC LOCK WASHER - / Spool Scraper COMPLETE ASSY -LH 090 COMPLETE ASSY - RH NUT - / 0 SPOOL SCRAPER - LH (SHOWN) 0 SPOOL SCRAPER - RH 9 BOLT - / X -/ 00 SCRAPER MOUNT 00 U-CLAMP / X X -/ 09 FLANGE NUT - / NC LOCK WASHER - / NOTE: LEFT HAND SCRAPER SHOWN 00 WISHEK PARTS MANUAL 9 /

39 BLADE SCRAPERS Bearing Standard Scraper NOTE: LEFT HAND SCRAPER SHOWN 0 COMPLETE SCRAPER - LH 0 COMPLETE SCRAPER - RH 090 COMPLETE SCRAPER - LH 09 COMPLETE SCRAPER - RH 099 COMPLETE SCRAPER 0 - LH 000 COMPLETE SCRAPER 0 - RH 9 BOLT - / X -/ 00 FLAT WASHER - / 0 ADJUST PLATE - RIGHT 09 ADJUST PLATE - RIGHT 0 / 0 ADJUST PLATE - LEFT 09 ADJUST PLATE - LEFT 0 / 0 FLANGE NUT - / NC 09 RIGHT HAND WELD - / 09 RIGHT HAND WELD LEFT HAND WELD - / 09 LEFT HAND WELD U-CLAMP / X X -/ 09 FLANGE NUT - / NC Rotary Scraper COMPLETE SCRAPER ASSY (-) 09 SUBASSY - (INCL.,,,,,) 0 NUT - SCRAPER 00 SCRAPER WASHER ASSY 09 BEARING 09 BEARING MOUNT 00 / X -/ GR NUT- / NC LOCK WASHER - / 09 FLANGE NUT - / NC 9 00 SCRAPER RETAINING PLATE 0 00 U-CLAMP / X X -/ 00 SCRAPER MOUNT 9 BOLT - / X -/ 0 DISC 00 9 WISHEK PARTS MANUAL 9 /

40 ROTARY SCRAPER BOLT - / X 0IN SCRAPER BLADE SNAP RING - SHAFT X. ID BEARING BEARING HOUSING LOCK NUT - / NC 0 LOCK NUT - / NC 9 9 BEARING PROTECTOR 0 BOLT - / X 09 FLANGE NUT - / NC RIGHT - ROTARY SCRAPER ARM LEFT - ROTARY SCRAPER ARM (SHOWN) 00 U-CLAMP / X X -/ NOTE: LEFT OR RIGHT HAND DESIGNATION BY LETTER ON TOP PLATE. WISHEK PARTS MANUAL 9 / 0

41 ROTARY SCRAPER 9 0 LH COMPLETE SCRAPER ASSY (-) 9 RH COMPLETE SCRAPER ASSY (-) 0 NUT - SCRAPER 0 DISC 00 SCRAPER WASHER ASSY 09 BEARING 9 PLW BOLT - / X -/ GR (CAST HOUSING) BOLT - / X -/ Z (STEEL HOUSING) 99 BEARING HOUSING - CAST 00 U-CLAMP / X X -/ 099 SCRAPER ARM - LH 090 SCRAPER ARM - RH 9 09 FLANGE NUT - / NC 0 NUT- / NC 00 / X -/ GR WISHEK PARTS MANUAL 9 /

42 MUD SCRAPER COMPLETE MUD SCRAPER RH / 090 COMPLETE MUD SCRAPER LH / 090 COMPLETE MUD SCRAPER RH / COMPLETE MUD SCRAPER LH /0 0 U-CLAMP / X X 99 MUD SCRAPER - RH / BLADES 00 MUD SCRAPER - RH /0 BLADES 00 MUD SCRAPER - LH / BLADES 00 MUD SCRAPER - LH /0 BLADES LOCKWASHER - / NUT - / NC WISHEK PARTS MANUAL 9 /

43 HYDRAULIC HOSE CLAMPS / X -/ GR ( HOSE) 90 / X-/ GR ( HOSES) / WASHER 0 HOSE CLAMP WISHEK PARTS MANUAL 9 /

44 SINGLE POINT DEPTH CONTROL WISHEK PARTS MANUAL 9 /

45 SINGLE POINT DEPTH CONTROL, CONTINUED 9 -/ FLAT WASHER 09 PIN - -/ X / X -/ ROLL PIN 090 REAR BENT TUBE 90 FRONT TUBE / x -/ BOLT SPACER TUBE VALVE SPACER SLIDE ADJUST 9 / JAM NUT 0 0 ADJUST EAR / X -/ ROLL PIN 0 ADPT MORB X MJ ADPT MJ X MPT ADJUST CRANK 0 SPRING PIN 90 / X -/ ROLL PIN BOLT - / NC X -/ SINGLE POINT BRACKET 9 LOCK NUT / NC 9 0 LOCK NUT / NC 0 9 ELBOW - MJ X MPT ELBOW - MJ X MPT 0 ELBOW - MORB X MJ 9 SP DCV ASSY - PIPE FTNGS SP DCV ASSY - ORB FTNGS 9 / NPT PLUG REPAIR KIT SP DCV ASSY - ORB FTNGS 9 MORB HEX HEAD PLUG FRAME PLATE WISHEK PARTS MANUAL 9 /

46 DEPTH CONTROL AND TRANSPORT LOCKS NOTE: DESIGNED FOR INCH CYLINDER ROD DEPTH CONTROL SEGMENT 099 -/ DEPTH CONTROL SEGMENT 099 DEPTH CONTROL SEGMENT PIN - / X -/ 90 HAIR PIN CLIP 9 TRANSPORT LOCK BRACKET 90 COMPLETE DEPTH CONTROL KIT 00 WISHEK PARTS MANUAL 9 /

47 -/ X REPHASING CYLINDER MAIN LIFT ON FOLDING UNITS Seal Kit NOTE: GREEN CYLINDER - WISHEK BLACK CYLINDER - PRINCE 09 COMPLETE CYLINDER -/ X 0 PISTON ROD - PRINCE 09 BOLT - / NC X 0 PIN - -/ X -/ 09 LOCKNUT / NC 009 SEAL KIT - -/ PHASING - WISHEK 0 SEAL KIT - -/ PHASING - PRINCE 00 SEAL KIT - -/ PHASING - WISHEK (-/ ROD) 90 SHAFT LOCK NUT - -NF- WISHEK 0 SHAFT LOCK NUT - -/-NF- PRINCE 0 -/ PISTON - WISHEK 00 -/ PISTON - PRINCE 9 0 -/ HEADGLAND - WISHEK 0 -/ HEADGLAND - PRINCE 0 0 -/ CYLINDER NUT - WISHEK 0 -/ CYLINDER NUT - PRINCE -- 0 TO. CYLINDER PIN UPDATE KIT KITS REQUIRED PER CYLINDER 9 0 WISHEK PARTS MANUAL 9 /

48 X REPHASING CYLINDER WINGS ON FOLDING UNITS MAINFRAME ON NON-FOLDING UNITS Seal Kit NOTE: GREEN CYLINDER - WISHEK BLACK CYLINDER - PRINCE 090 COMPLETE CYLINDER X 0 PISTON ROD - PRINCE 09 BOLT - / NC X 0 PIN - -/ X -/ 09 LOCKNUT / NC 0 SEAL KIT - PHASING - WISHEK 0 SEAL KIT - PHASING - PRINCE 90 SHAFT LOCK NUT - -NF - WISHEK 0 SHAFT LOCK NUT - -/-NF- PRINC 0 PISTON - WISHEK 0 PISTON - PRINCE 9 0 HEADGLAND - WISHEK 0 HEADGLAND - PRINCE 0 9 CYLINDER NUT - WISHEK 0 CYLINDER NUT - PRINCE -- 0 TO. CYLINDER PIN UPDATE KIT 9 0 WISHEK PARTS MANUAL 9 /

49 HYDRAULICS - RAISE/LOWER HOSE (NON-FOLD) 0 IN CYL QUICK DISCONNECT COUPLER 0 HOSE FJX-FJX (TANDEM/OFFSET - ) 9 MJXMJ UNION 0 HOSE FJX-MP (TANDEM/OFFSET - ) 0 HOSE FJX-MP (TANDEM/OFFSET - ) HOSE FJX-MBX90 (TANDEM - ) 0 HOSE FJX-MBX90 (OFFSET - ) 0 HOSE FJX-MBX90 (TANDEM - ) HOSE FJX-MBX90 (OFFSET - ) TEE MJ () 9 HOSE FJX-MBX90 (TANDEM - ) HOSE FJX-MBX90 (OFFSET - ) 0 0 HOSE FJX-MBX90 (TANDEM - 0 HOSE FJX-MBX90 (OFFSET - ) 0 MORB-MJ ELBOW 9 WISHEK PARTS MANUAL 9 /

50 HYDRAULICS - RAISE/LOWER HOSE (FOLDING TANDEM) 9 CYL -/ CYL 0 00 QUICK DISCONNECT COUPLER HOSE FJX-MP (ALL FOLDING TANDEM) 9 MJXMJ UNION HOSE FJX-FJX (ALL FOLDING TANDEM) HOSE FJX-MP (ALL FOLDING TANDEM) HOSE FJX-MBX90 (ALL FOLDING TANDEM) 0 HOSE FJX-MBX90 (ALL FOLDING TANDEM- LNT - ) 9 HOSE MBX90-MBX90 (0 - - TANDEM) HOSE MBX90-MBX90 (0 TANDEM) 00 HOSE MBX90-MBX90 ( - TANDEM) 0 HOSE MBX90-MBX90 (LNT TANDEM) HOSE FJX-MBX90 (0 - - TANDEM) HOSE FJX-MBX90 (0 TANDEM) 09 9 HOSE FJX-MBX90 ( - AND LNT TANDEM) 9 TEE MJ () 0 0 MORB-MJ ELBOW WISHEK PARTS MANUAL 9 / 0

51 HYDRAULICS - RAISE/LOWER HOSE (FOLDING OFFSET) CYL -/ CYL 00 QUICK DISCONNECT COUPLER 0 HOSE FJX-MP (ALL FOLDING OFFSET) 0 HOSE MBX90-MBX90 (ALL FOLDING OFFSET) 0 HOSE MBX90-MBX90(0/FT) 0 HOSE MBX90-MBX90 (/FT) TEE MJ () 0 9 HOSE MBX90-MBX90 (0/FT) 00 9 HOSE MBX90-MBX90 (/FT)) 0 MORB-MJ ELBOW WISHEK PARTS MANUAL 9 /

52 X CYLINDER - WING Seal Kit NOTE: GREEN CYLINDER - WISHEK BLACK CYLINDER - PRINCE 00 0 COMPLETE CYLINDER X 09 LOCKNUT / NC 0 PIN - -/ X -/ 09 PIN - -/ X -/ - FT/FT 09 COLLAR (HOLES) - FT/FT 09 SLEEVE (NO HOLES)- FT/FT 09 BOLT - / NC X 00 PISTON ROD - PRINCE 0 SEAL KIT - - WISHEK 09 SEAL KIT - - PRINCE 0 LOCKNUT -/- - WISHEK 00 LOCKNUT -/- - PRINCE 0 PISTON - WISHEK 00 PISTON - PRINCE 9 0 HEADGLAND - WISHEK 00 HEADGLAND - PRINCE 0 0 CYLINDER NUT - WISHEK 00 CYLINDER NUT - PRINCE 9 0 WISHEK PARTS MANUAL 9 /

53 X CYLINDER - WING 0FT TO FT (000-00) Seal Kit 00 NOTE: GREEN CYLINDER - WISHEK BLACK CYLINDER - PRINCE 0 COMPLETE CYLINDER X 09 LOCKNUT / NC 0 PIN - -/ X -/ 09 BOLT - / NC X 000 PISTON ROD- PRINCE 0 SEAL KIT - - WISHEK 09 SEAL KIT - - PRINCE 0 LOCKNUT -/- - WISHEK 00 LOCKNUT -/- - PRINCE 0 PISTON - WISHEK 00 PISTON - PRINCE 9 0 HEADGLAND - WISHEK 00 HEADGLAND - PRINCE 0 0 CYLINDER NUT - WISHEK 00 CYLINDER NUT - PRINCE 9 0 WISHEK PARTS MANUAL 9 /

54 X CYLINDER FT-FT LNT (00-00 LOWERED WING HINGE) Seal Kit 00 COMPLETE LNT CYLINDER X 09 LOCKNUT / NC 0 PIN - -/ X -/ 09 BOLT - / NC X 00 PISTON ROD - PRINCE 09 SEAL KIT - - PRINCE 00 LOCKNUT -/- - PRINCE 00 PISTON - PRINCE 9 00 HEADGLAND - PRINCE 0 00 CYLINDER NUT - PRINCE 9 0 WISHEK PARTS MANUAL 9 /

55 HYDRAULICS - FOLDING HOSE (FT-FT-FT) QUICK DISCONNECT COUPLER 0 HOSE FJX-MP TEE MJ () HOSE FJX-MBX90 HOSE FJX-MBX90 HOSE FJX-MBX90 WISHEK PARTS MANUAL 9 /

56 HYDRAULICS - FOLDING HOSE (0FT) QUICK DISCONNECT COUPLER 0 HOSE FJX-MP 0 MJ CROSS HOSE MBX90-MBX90 HOSE MBX90-MBX90 HOSE MBX90-MBX90 0 HOSE MBX90-MBX90 0 HOSE FJX-FX 9 HOSE FJX-MBX HOSE FJX-MBX90 TEE MJ () WISHEK PARTS MANUAL 9 /

57 HYDRAULICS - FOLDING HOSE (FT-FT NON-LNT) QUICK DISCONNECT COUPLER 0 HOSE FJX-MP 0 MJ CROSS HOSE MBX90-MBX90 HOSE MBX90-MBX90 HOSE MBX90-MBX90 0 HOSE MBX90-MBX90 0 HOSE FJX-FX 9 HOSE FJX-MBX HOSE FJX-MBX90 TEE MJ () WISHEK PARTS MANUAL 9 /

58 HYDRAULICS - FOLDING HOSE (FT-FT LNT) QUICK DISCONNECT COUPLER 0 HOSE FJX-MP 0 MJ CROSS HOSE MBX90-MBX90 HOSE MBX90-MBX90 0 HOSE MBX90-MBX90 0 HOSE MBX90-MBX90 0 HOSE FJX-FX 9 0 HOSE FJX-MBX HOSE FJX-MBX90 TEE MJ () WISHEK PARTS MANUAL 9 /

59 OVER CENTER WING LOCK (COMMON PARTS) FOLDING OFFSET BOLT - / x 09 NUT - / TOP LOCK 0 COLLAR - WELDMENT 009 CARRIAGE BOLT - / X 0 GREASE FITTING - / X 9 BOLT - / X 9 0 NUT - / LOCK 0 ATTACHING PLATE - 0 AND EARLIER ATTACHING PLATE - 0 AND LATER 9 0 PIN - 0 AND EARLIER PIN - 0 AND LATER 0 0 ADJUST BASE - 0 AND EARLIER ADJUST BASE - 0 AND LATER 0 NUT - -/ 00 JAM NUT - -/ 0 WASHER - -/ - 0 AND EARLIER WASHER - -/ - 0 AND LATER 00 ADJUST BOLT - 0 AND EARLIER 9 ADJUST BOLT - 0 AND LATER NUT - / LOCK WASHER - / 090 COTTER PIN - / X 0 BOLT - / X 9 WISHEK PARTS MANUAL 9 /

60 OVER CENTER WING LOCK (SMALL 0FT-FT) FOLDING OFFSET PAGE PIN - -/ 0 TOWER ASSY - NOT SERVICED 99 TOWER ASSY - NOT SERVICED 90 PIN - X -/ - 0 AND EARLIER PIN - X -/ - 0 AND LATER 09 WASHER X -/ GA 0 COTTER PIN - / X -/ 0 SIDE PLATE - 0 AND EARLIER 90 SIDE PLATE - 0 AND LATER 09 PIN - -/ W/GREASE FITTING 0 CONTROL ARM - 0 AND EARLIER 0 CONTROL ARM - 0 AND LATER 9 0 PIN - -/ 0 0 CYLINDER ANCHOR - WELDMENT - 0 AND EARLIER 9 CYLINDER ANCHOR - WELDMENT - 0 AND LATER 0 CYLINDER - X 0-/ 0 BELLCRANK ASSEMBLY -0 AND EARLIER BELLCRANK ASSEMBLY - 0 AND LATER 0 FRONT/REAR HINGE PINS - -/ 0 AND EARLIER 99 FRONT/REAR HINGE PINS - -/ 0 AND LATER (NOT SHOWN) WISHEK PARTS MANUAL 9 / 0

61 OVER CENTER WING LOCK (LARGE FT-FT) FOLDING OFFSET PAGE PIN - -/ 0 TOWER ASSY - NOT SERVICED 9 TOWER ASSY - NOT SERVICED 90 PIN - X -/ - 0 AND EARLIER PIN - X -/ - 0 AND LATER 09 WASHER X -/ GA 0 COTTER PIN - / X -/ 0 SIDE PLATE - 0 AND EARLIER 9 SIDE PLATE - 0 AND LATER 09 PIN - -/ W/GREASE FITTING 0 CONTROL ARM - 0 AND EARLIER CONTROL ARM - 0 AND LATER 9 0 PIN - -/ 0 0 CYLINDER ANCHOR - 0 AND EARLIER 9 CYLINDER ANCHOR - 0 AND LATER 09LH X. CYLINDER (LEFT) 09RH X. CYLINDER (RIGHT) 00 BELLCRANK ASSY - 0 AND EARLIER BELLCRANK ASSY - 0 AND LATER 0 FRONT/REAR HINGE PINS - -/ 0 AND EARLIER 99 FRONT/REAR HINGE PINS - -/ 0 AND LATER (NOT SHOWN) WISHEK PARTS MANUAL 9 /

62 OVER CENTER WING LOCK WING FOLD CYLINDER FOLDING OFFSET NOTE: GREEN CYLINDER - WISHEK BLACK CYLINDER - PRINCE Seal Kit 09LH COMPLETE CYLINDER X -/ - & 09RH COMPLETE CYLINDER X -/ - & 0 COMPLETE CYLINDER X 0-/ - 0 & 0 PIN - -/ 09 BOLT- / X 09 LOCKNUT / NC 0 PIN - -/ 0 SEAL KIT - - WISHEK 09 SEAL KIT - - PRINCE 00 LOCKNUT -/- - WISHEK 00 LOCKNUT -/- - PRINCE 0 PISTON - WISHEK 00 PISTON - PRINCE 9 0 HEADGLAND - WISHEK 00 HEADGLAND - PRINCE 0 0 CYLINDER NUT - WISHEK 00 CYLINDER NUT - PRINCE 9 0 WISHEK PARTS MANUAL 9 /

63 HYDRAULICS - FOLDING HOSE (0FT-FT) 00 QUICK DISCONNECT COUPLER 0 HOSE FJX-MP TEE MJ () 0 MJ X MORB ELB 0 HOSE FJX X FJX 0 MJ X FJX ELB 0 MJ X MJ ELB 0 HOSE FJX-FX WISHEK PARTS MANUAL 9 /

64 HYDRAULICS - FOLDING HOSE (FT-FT) 00 QUICK DISCONNECT COUPLER 0 HOSE FJX-MP TEE MJ () 0 MJ X MORB ELB 0 HOSE FJX X FJX 0 MJ X FJX ELB 0 MJ X MJ ELB 0 HOSE FJX-FX WISHEK PARTS MANUAL 9 /

65 LIGHT KIT 9 FT HARNESS AG MODULE WISHBONE LEAD AMBER LIGHT 09 AMBER LENS ONLY RED LIGHT 09 RED LENS ONLY LIGHT BRACKET 0 BOLT - / X 0 SET SCREW - / X / 9 09 LIGHT HOUSING 0 0 SMV EMBLEM 9 SMV SPADE BRACKET W0 0 X 9 LIGHT ARM W09 9 X LIGHT ARM W00 LIGHT BASE (NON-WINGED MODELS) W0 LIGHT ARM W09 LIGHT ARM W0 LIGHT ARM W0 0 LIGHT ARM WISHEK PARTS MANUAL 9 /

66 REAR HITCHES / NUT 0 / LOCK WASHER 0 U-BOLT - / X X (IN TALL FRAME) 0 HITCH PLATE - OFFSET (IN TALL FRAME) 90 / X -/ Z BOLT 090 CAT HITCH (NON-FOLD) 09 CLEVIS HITCH (NON-FOLD) X 9 Z BOLT (FOLDING OFFSET) 90 X Z BOLT (ALL TANDEM) 9 0 HITCH PLATE (FOLDING OFFSET) 0 HITCH PLATE (TANDEM) 0 0 CAT HITCH (FOLDING OFFSET) 09 CLEVIS HITCH (FOLDING OFFSET) 0 CAT HITCH (NON-FOLD TANDEM) 0 CLEVIS HITCH (NON-FOLD TANDEM) 0 CAT HITCH (FOLDING TANDEM) 0 CLEVIS HITCH (FOLDING TANDEM) LOCK WASHER NUT WISHEK PARTS MANUAL 9 /

67 DECALS 9 0 NT MODEL DECAL (SHOWN) 9 NT MODEL DECAL 0 NT MODEL DECAL LNT MODEL DECAL NT MODEL DECAL LNT MODEL DECAL WISHEK DECAL 9 LNT MODEL DECAL 99 DECAL SAFETY SET 90 LNT MODEL DECAL 990 DECAL READ MANUAL WARNING 9 N MODEL DECAL 990 DECAL SPEED SIGN 0 MILE/HR 9 N MODEL DECAL 99 DECAL LOCKOUT WARNING 9 NT MODEL DECAL 99 DECAL HIGH VOLTAGE DANGER 9 N MODEL DECAL 99 DECAL TILLAGE PROMOTES 9 NT MODEL DECAL 9 99 DECAL FOLDING WINGS DANGER N MODEL DECAL DECAL INSTALL LOCK PINS WARNING WISHEK PARTS MANUAL 9 /

68 MISCELLANEOUS 0 GREEN PAINT 0 YELLOW PAINT 00 BLACK PAINT 0 RED PAINT - JI CASE RED PAINT - MF ep GREASE (0 PACK) WISHEK PARTS MANUAL 9 /

69 9 WISHEK PARTS MANUAL 9 /