614NT PARTS MANUAL TANDEM DISC WIL-RICH. PO Box 1030 Wahpeton, ND PH (701) Fax (701)

Size: px

Start display at page:

Download "614NT PARTS MANUAL TANDEM DISC WIL-RICH. PO Box 1030 Wahpeton, ND PH (701) Fax (701)"

Gwendoline Hill
5 years ago
Views:

1 NT PARTS MANUAL TANDEM DISC Printed in USA (0) WR - /0 WIL-RICH PO Box 00 Wahpeton, ND 0 PH (0) - Fax (0) - NT DISC PARTS MANUAL 0 /0

2 WARRANTY The only warranty Wil-Rich gives and the only warranty the dealer is authorized to give is as follows: We warrant products sold by us to be in accordance with our published specifications or those specifications agreed to by us in writing at time of sale. Our obligation and liability under this warranty is expressly limited to repairing, or replacing, at our option, within months after date of retail delivery, any product not meeting the specifications. We make no other warranty, express or implied and make no warranty of merchantability or of fitness for any particular purpose. Our obligation under the warranty shall not include any transportation charges or costs or installation or any liability for direct, indirect or consequential damage or delay. If requested by us, products or parts for which a warranty claim is made are to be returned transportation prepaid to our factory. Any improper use, operation beyond rated capacity, substitution of parts not approved by us, or any alteration or repair by others in such manner as in our judgment affects the product materially and adversely shall void this warranty. No employee or representative is authorized to change this warranty in any way or grant any other warranty. Wil-Rich reserves the right to make improvement changes on any of our products without notice. When warranty limited or not applicable: Warranty on hoses, cylinders, hubs, spindles, engines, valves, pumps or other trade accessories are limited to the warranties made by the respective manufactures of these components. Rubber tires and tubes are warranted directly by the respective tire manufacturer only, and not by Wil-Rich. Warranty does not apply to any machine or part which has been repaired or altered in any way so as in the our judgment to affect its reliability, or which has been subject to misuse, negligence or accident. A Warranty Validation and Delivery Report Form must be filled out and received by Wil-Rich to initiate the warranty coverage. WARRANTY CLAIMS PROCEDURE. The warranty form must be returned to Wil-Rich within fifteen () working days from the repair date.. Parts returned to Wil-Rich without authorization will be refused. The parts must be retained at the dealership for ninety (0) days after the claim has been filed. If the Service Department would like to inspect the parts, a packing slip will be mailed to the dealer. The packing slip must be returned with the parts. The parts must be returned prepaid within thirty (0) days of receiving authorization. After the parts are inspected and warranty is verified, credit for the return freight will be issued to the dealer.. Parts that will be scrapped at the dealership will be inspected by a Wil-Rich Sales Representative, District Sales Manager or Service Representative within the ninety (0) day retaining period. NT DISC PARTS MANUAL 0 /0

3 SERIAL NUMBER LOCATION Serial Number Break Every implement has a serial number located on the frame. These serial numbers are consecutively assigned to the implements as they are manufactured. To aid in part ordering, we reference to the serial number at the point the change occurred to provide an accurate means of determining the proper parts. NT DISC PARTS MANUAL 0 /0

4 Orientation Any reference to left (L) or right (R) sides or components is to be understood as being viewed from behind the implement and looking forward. Modifications It is the policy of WIL-RICH to improve its products whenever possible and practical to do so. We reserve the right to make changes, improvements, and modifications at any time without incurring the obligation to make such changes, improvements and modifications on any equipment sold previously. Abbreviations ASSY... Assembly BLD... Blade BRKT... Bracket CTR... Center CP...Cup Point (FF)... Female Female FTG GRS...Fitting Grease GR... Grade of Bolt HD... Heavy Duty HDWE... Hardware LH... Left Hand (MF)...Male Female MF... Main Frame MTG...Mounting NC... National Course Thread NF... National Fine Thread NPT... National Pipe Thread RH... Right Hand SS... Screw Stop SST... Stainless Steel TA... Tandem TBP... Top Bypass W/... With W/O... Without CONTENTS HITCH... MAIN FRAME... - MAIN AXLE... LEVELING COMPONENTS WING FRAME... BOLT HUB &-/ SPINDLE... WALKING TANDEMS... UTILITY POLE... DEPTH CONTROL HYDRAULICS... - WING FOLD HYDRAULICS... - CASTER GAUGE WHEEL...0 BOLT HUB & -/ SPINDLE... DISC GANG MOUNT... DISC GANG ASSEMBLY... BEARING ASSEMBLY... DISC SCRAPER ASSEMBLY... - REAR HITCH... HARROW MOUNTING COMPONENTS. LIGHTS... DECALS... NT DISC PARTS MANUAL 0 /0

5 HITCH Hose Carrier (See Page ) 0 00 DISC HITCH (FT) (SOLID FRAME DISC) DISC HITCH (FT) (SPLIT FRAME DISC) /X-/ ROLL PIN 0 -/ FLAT WASHER -/X-/ PIN JACK -/NCX GR BOLT CAST HITCH SAFETY CHAIN -/NC JAM NUT 0 LOWER ROD (RH THREADS) ADJUSTMENT TUBE UPPER ROD (LH THREADS) -/X-/ PIN 0 POST 0 -/X-/ PIN 0 /NCX-/ GR BOLT W00 HITCH ATTACH PIN /NC TOP LOCK NUT NT DISC PARTS MANUAL 0 /0

6 MAIN FRAME & FT DISC FT CENTER FRAME LEFT FRONT GANG TUBE 0 RIGHT FRONT GANG TUBE RIGHT REAR GANG TUBE LEFT REAR GANG TUBE NT DISC PARTS MANUAL 0 /0

7 MAIN FRAME,,, 0, & FT DISC LEFT FT MAINFRAME RIGHT FT MAINFRAME FRONT LEFT GANG TUBE (FOLDING) 00 GANG TUBE (FT) 0 GANG TUBE (FT) GANG TUBE (FT) 0 GANG TUBE (0FT) FRONT RIGHT GANG TUBE (FOLDING) 00 GANG TUBE (FT) 0 GANG TUBE (FT) GANG TUBE (FT) 0 GANG TUBE (0FT) 0 REAR RIGHT GANG TUBE (FOLDING) 00 GANG TUBE (FT) 0 GANG TUBE (FT) GANG TUBE (FT) 0 GANG TUBE (0FT) REAR LEFT GANG TUBE (FOLDING) 00 GANG TUBE (FT) 0 GANG TUBE (FT) GANG TUBE (FT) 0 GANG TUBE (0FT) 0 /NCX-/ BOLT 0 / LOCK WASHER 0 /NC NUT NT DISC PARTS MANUAL 0 /0

8 MAIN AXLE -/ Hub & Spindle (See page ) 0 0 AXLE CASTING /NCX-/ GR FT MAIN AXLE(,,, 0, 0,, & FT) FT MAIN AXLE ( & FT) /NFX G BOLT W00 WHL ASSY /RX. /NF POS LKNUT 0 AXLE CLAMP W0 -/X PHASING CYLINDER W0 CYL PIN (-/ x.) 0 /NC TOP LKNUT 0 /NCX-/ GR BOLT 0 /NC NUT 0 / LOCK WASHER NT DISC PARTS MANUAL 0 /0

9 LEVELING COMPONENTS LEVELING POLE SEE PAGE 0 NUT AND BOLT &0 0 /NC NUT 0 / LOCK WASHER 0 /NCX GR BOLT W0B LEVELING FLANGE W0 PIN (-/X-/) /NCX-/ GR BOLT /NC TOP LOCK NUT W00B BELLCRANK W0 PIN (-/X-/) 0 /NC TOP LOCK NUT 0 /NCX-/ GR BOLT W0 PIN (X-/) W00BLINK N-SERIES W0 PIN (-/X-/) NT DISC PARTS MANUAL 0 /0

10 LEVELING COMPONENTS 0 SPRING STUB W0 LEVELING SPRING W00B TRUNION W0B LEVELING SPRING WASHER 0 SCREW BASE NT DISC PARTS MANUAL 0 /0 0

11 WING FRAME 0 0 -/ Hub & Spindle (See page ) W0 FOLD CYLINDER (X) /X PIN WITH HAIRPIN LEFT FT WING (SHOWN) 0 RIGHT FT WING LEFT FT WING 0 RIGHT FT WING 0 AXLE CASTING /NFX BOLT /NF POS LOCK NUT -/ HUB/SPINDLE (SEE PG ) W00 WHL ASSY /RX. LEFT NT AXLE (SHOWN) RIGHT NT AXLE 0 0 AXLE CLAMP 0 / LOCK WASHER 0 /NC NUT /NCX-/ BOLT W00 WING LIFT CYL (X) THREADED ADJUST ROD. -/NC NUT - JAM LF WING GANG TUBE 0 LF WING GANG TUBE LF WING GANG TUBE LF WING GANG TUBE RF WING GANG TUBE RF WING GANG TUBE RF WING GANG TUBE RF WING GANG TUBE LR WING GANG TUBE LR WING GANG TUBE LR WING GANG TUBE 0 LR WING GANG TUBE RR WING GANG TUBE RR WING GANG TUBE RR WING GANG TUBE 0 RR WING GANG TUBE -/ FLAT WASHER -/X PIN 0 /X-/ ROLL PIN 0 /X-/ ROLL PIN -/NC NUT HEAVY SLOTTED -/X PIN W0 CYL PIN (-/ x.) LINK NT DISC PARTS MANUAL 0 /0

12 -BOLT HUB & -/" SPINDLE 0 ITEM PART NO DESCRIPTION ITEM PART NO DESCRIPTION -BOLT HUB & SPINDLE (RED) -/" AXLE SPINDLE (-/) (INCLUDES ITEMS - & -) /NCx GR BOLT 0 /x-/ COTTER PIN 0 /NC LOCK NUT 00 -/ODx-/ID SPINDLE WASHER 0 INNER BEARING CONE (TIMKIN# 0) 0 OUTER BEARING CONE (TIMKIN# 0) 0 INNER BEARING CUP (TIMKIN# 0) 0 OUTER BEARING CUP (TIMKIN# 0) /NFx-/ 0 WHEEL BOLT 0 -BOLT PRESSED HUB NF SLOTTED NUT (INCLUDES ITEMS, &) 0 DUST CAP /NPT GREASE FITTING W00 /RX. WHEEL ASSY -/" TRIPLE LIP SEAL NT DISC PARTS MANUAL 0 /0

13 MAIN FRAME & WING TANDEM AXLE 0 -/" BEARING CONE (0) TANDEM PIN BEARING BUSHING BEARING SEAL 0 -/"NF HYDRA JAM LK NUT 0 FTG GRS /- 0-B 0 XX0 RIGHT WALKER (SHOWN) 0 XX0 LEFT WALKER NT DISC PARTS MANUAL 0 /0

14 UTILITY POLE 0 0 / NCX BOLT PLUG HOLDER MANUAL TUBE WITH BRACKET / NCX/ BOLT /" FLAT WASHER HYD HOSE BRACKET /" LOCK WASHER / NC HEX NUT 0 RUBBER EDGE 0 0 / NC HEX NUT /" LOCK WASHER /" FLAT WASHER 0 / NCX X U-BOLT NT DISC PARTS MANUAL 0 /0

15 - FT DISC DEPTH CONTROL HYDRAULICS SEE PG. FOR CYLINDER PINS ADP MJ X MPT TEE MJ X MJ X MJ HYD HOSE /X FJX-FJX 0 ELB MORB X MJ W0 CYL STOP PACKAGE 00 QUICK DISCONNECT COUPLER W0 HYD CYL -/ X BP W00 SEAL KIT 0 HYD HOSE / x FJX-FJX 0 HYD HOSE /X FJX-FJX IMPORTANT Seal kits are the only service parts available for hydraulic cylinders NT DISC PARTS MANUAL 0 /0

16 DEPTH CONTROL HYDRAULICS - FT DISC 0 SEE PG. FOR CYLINDER PINS ADP MJ X MPT TEE MJ X MJ X MJ 0 HYD HOSE / x FJX-FJX 0 ELB MORB X MJ W0 CYL STOP PACKAGE 00 QUICK DISCONNECT COUPLER W0 HYD CYL -/ X BP W00 SEAL KIT W00 HYD CYL X BP W0 SEAL KIT 0 HYD HOSE / x FJX-FJX - -FT 0 HYD HOSE / x FJX-FJX - FT 0 HYD HOSE / x FJX-FJX - -FT HYD HOSE / x0 FJX-FJX - 0-FT HYD HOSE / x FJX-FJX - FT HYD HOSE / x0 FJX-FJX - -FT HYD HOSE / x FJX-FJX - 0-FT IMPORTANT Seal kits are the only service parts available for hydraulic cylinders NT DISC PARTS MANUAL 0 /0

17 WING FOLD HYDRAULICS 0 FT DISC SEE PG. 0 FOR CYLINDER PINS 00 QUICK DISCONNECT COUPLER ADP MJ X MPT HYD HOSE / x0 FJX-FJX W0 X HYD CYLINDER W0 SEAL KIT 0 ELB MORB X MJ HYD HOSE / x FJX-FJX HYD HOSE / x0 FJX-FJX TEE MJ X MJ X MJ IMPORTANT Seal kits are the only service parts available for hydraulic cylinders NT DISC PARTS MANUAL 0 /0

18 WING FOLD HYDRAULICS - FT DISC SEE PG. 0 FOR CYLINDER PINS 00 QUICK DISCONNECT COUPLER ADP MJ X MPT HYD HOSE / x0 FJX-FJX W0 X HYD CYLINDER W0 SEAL KIT 0 ELB MORB X MJ HYD HOSE / x FJX-FJX HYD HOSE / x0 FJX-FJX TEE MJ X MJ X MJ TEE MJ X MJ X MORB IMPORTANT Seal kits are the only service parts available for hydraulic cylinders NT DISC PARTS MANUAL 0 /0

19 WING FOLD HYDRAULICS - FT DISC SEE PG. 0 FOR CYLINDER PINS 00 QUICK DISCONNECT COUPLER ADP MJ X MPT HYD HOSE / x0 FJX-FJX W0 X HYD CYLINDER W0 SEAL KIT 0 ELB MORB X MJ HYD HOSE / x FJX-FJX HYD HOSE / x0 FJX-FJX TEE MJ X MJ X MJ 0 CROSS MJ IMPORTANT Seal kits are the only service parts available for hydraulic cylinders NT DISC PARTS MANUAL 0 /0

20 CASTER GAUGE WHEEL 0 SEE PG. 0 FOR HUB AND SPINDLE 0 GAUGE WHEEL JACK GAUGE WHEEL ARM NCX. BOLT /NCX BOLT /NCX BOLT 0 WHL ASSY.LX B PLY 0 RIM X B (WV PO) TIRE LX PLY HUB AND SPINDLE (LG0000) 0 / LOCK WASHER 0 NUT HEX /"NC 0 00 CASTER WHEEL LEG / LOCK WASHER 0 /NC NUT BRAKE ASSEMBLY 0 NYLON LOCK NUT 00 GAUGE WHEEL PIVOT LINK ARM STOP COLLAR NT DISC PARTS MANUAL 0 /0 0

21 -BOLT HUB & -/ SPINDLE 0.PLT -/" HUB & SPINDLE ASSY (INCLUDES - & -) 0 PIN COT /DIAx-/ 0 SPINDLE WASHER /ID 0 OUTER BEARING CONE (LM0) 00 -/IN PRESSED HUB W/ CUPS WEAR SLEEVE 0 OUTER BEARING CUP (LM00) FTG GRS /NPT 0-BL(/") INNER BEARING CUP (LM0) TRIPLE LIP SEAL 0 /NCx-/ GR BOLT NUT NEX CENTER LOCK /NC -/" SPINDLE X." LONG INNER BEARING CONE (LM) WHEEL BOLT /NFx (/ HEAD) 0 NUT SLTD /NF DUST CAP NT DISC PARTS MANUAL 0 /0

22 DISC GANG ASSEMBLY 0 0 /-NCXX U-BOLT 0 SPRING SHANK PLATE /NC NUT / LOCK WASHER SPRING SHANK PLATE W/STUD -/X-/X U-CLAMP W0 -/ WASHER W0 -/ NC NUT /NC X BOLT GR 0 WIDE SHANK MOUNT PLATE NT DISC PARTS MANUAL 0 /0

23 DISC GANG ASSEMBLY 0 W0-- IN NUT DRILLED /NC X BOLT GR CSTG BGR SHORT.0 S. PT 0 /NC X -/ BOLT GR /NC NUT GR 0 /IN LOCK WASHER 0 /NC NUT GR W0 IN BLADE W- IN BLADE 0 W0 FULL 0IN SPACER W- IN BLADE IN RND GANG SHAFT () ( BLADE) IN RND GANG SHAFT () ( BLADE) IN RND GANG SHAFT () ( BLADE) IN RND GANG SHAFT () ( BLADE) IN RND GANG SHAFT () ( BLADE) IN RND GANG SHAFT () (0 BLADE) IN RND GANG SHAFT (0) ( BLADE) W0 SPACER. OAL /NC X -/ BOLT GR W00 SPACER. OAL W00 0IN BLADE W0 END WASHER NT DISC PARTS MANUAL 0 /0

24 BEARING ASSEMBLY NT STANDARD BEARING ASSEMBLY LH NT STANDARD BEARING ASSEMBLY RH 0 /NC NUT 0 / IN LOCK WASHER /NC LOCK NUT 0 /NC X -/ BOLT GR W0 R OFFSET C-SPRING W0 L OFFSET C-SPRING /NC X -/ GR RIGHT SCRAPER BRACKET LEFT SCRAPER BRACKET W0 BEARING MOUNT W0- BEARING HOUSING 0 FTG GRS /NPT 0-BL(/") W0- IN BEARING 0 STANDARD SCRAPER 0 /NC NUT 0 / IN LOCK WASHER W00 U-BOLT /NCXX-/ W00 SCRAPER MOUNT /NC FLANGE NUT /NC X -/ GR W0 SCRAPER BLADE NT DISC PARTS MANUAL 0 /0

25 ROTARY SCRAPER W0 NUT - SCRAPER W0 DISC /NC X -/ GR W00 SCRAPER MOUNT W00 U-BOLT /NCXX-/ W00 SCRAPER RETAINING PLATE /NC FLANGE NUT 0 / IN LOCK WASHER 0 /NC NUT 0 W00 /X-/ GR BOLT W0 BEARING MOUNT W0 BEARING W00 SCRAPER WASHER ASSY 0 SPOOL SCRAPER 0 /NC NUT 0 / IN LOCK WASHER /NC FLANGE NUT W00 U-BOLT /NCXX-/ W00 SCRAPER MOUNT /NC X -/ GR W0 SPOOL SCRAPER LH W0 SPOOL SCRAPER RH NT DISC PARTS MANUAL 0 /0

26 REAR HITCH 0 Light Kit HYDRAULIC EXTENSION KIT 0 NUT HEX /"NC 0 WSHR HLK /ID(/ACT) Z /X-/X-/ STRAP 0 /-0NCX. SPECIAL BOLT 0 REAR HITCH TUBE /X-/X-/ STRAP X-/X-/ STRAP FLAT WASHER / BLT HEX /-0NCX Z 0 0 HITCH PLATE 0 TONGUE MOUNT 0 SAFETY LIGHT EXTENSION HYDRAULIC EXTENSION PKG,REAR HITCH Hyd Kit ADP MJ X MPT DOUBLE BREAK-AWAY CLAMP (00-) 0 DOUBLE ACTING FEMALE CPLR (0-P) HSE KPSI /X0 FJX-FJX 0 QUICK COUPLER MOUNT PLATE 00 QUICK DISCONNECT COUPLER 0 NUT HEX /-NC Z WSHR HLK /ID Z BLT-U /-NCXX Z NT DISC PARTS MANUAL 0 /0

27 HARROW MOUNTING COMPONENTS WING FRAME NUT HEX /"NC 0 WSHR HLK /ID(/ACT) Z NUT HEX /"NC /"NCx-/" GR HEX BOLT STANDOFF TUBE (-/ ) STANDOFF TUBE (-/ ) HOLE PLATE (. X.) 0 /"NCx-/" GR HEX BOLT SQ X 0 TUBE (BLACK) 0 SQ X TUBE (BLACK) SQ X 0 TUBE (BLACK) 0 / NCx x-/ GR U-BOLT NUT HEX /"NC 0 WSHR HLK /ID(/ACT) Z 0 TUBE BRACE BLT-U /-NCXX-/ NT DISC PARTS MANUAL 0 /0

28 LIGHTS NOTE: MOUNT THE RED LIGHTS AS REARWARD AS PRACTICAL ON THE CENTER FRAME. SPACE EVENLY, TO FROM THE MACHINE CENTER. AG MODULE 0FT HARNESSS WISHBONE LEAD NOTE: ROUTE LIGHT HARNESS THRU LIGHT ARMS RED LIGHT () ( REQ D) LIGHT BRACKET 0 /NC X BOLT 0 /NC X / SET SCREW AMBER LIGHT() LEFT RIGHT 0 SHORT BASE () /NC X -/ () BACKUP PLATE() SHORT INLINE BRACKET () /NC X -/ () BACKUP PLATE() NOTE: MOUNT AMBER LIGHTS AS WIDE AS POSSIBLE. THE AMBER LIGHTS MUST BE MOUNTED NO MORE THAN FROM THE IMPLEMENT EXTREMITIES, WHEN WINGS ARE FOLDED. X LIGHT ARM () 0-00 CENTERED W0 LIGHT ARM () BACKUP PLATE () /NC X -/ () NT DISC PARTS MANUAL 0 /0

29 DECALS NT MANUAL WIL-RICH NT DISC MANUAL 0 ITEM PART NO DESCRIPTION WIL-RICH DECAL NT DECAL SMV KIT CLEARANCE LIGHT PACKAGE W0 PINCH POINT WARNING W0 WARNING DECAL W0 OVERHEAD WARNING DECAL W0 WHEEL NUTS CAUTION NT DISC OP MANUAL 0 AMBER REFLECTOR NT DISC PARTS MANUAL 0 /0

7650 PARTS MANUAL DOUBLE OFFSET TANDEM DISK (DOT) WIL-RICH PO Box 1030 Wahpeton, ND PH (701) Fax (701)

7650 PARTS MANUAL DOUBLE OFFSET TANDEM DISK (DOT) WIL-RICH PO Box 1030 Wahpeton, ND PH (701) Fax (701) 0 PARTS MANUAL DOUBLE OFFSET TANDEM DISK (DOT) Printed in USA () WR - /0 WIL-RICH PO Box 00 Wahpeton, ND 0 PH (0) - Fax (0) - www.wil-rich.com 0 (DOT) DISK PARTS MANUAL /0 WARRANTY The only warranty Wil-Rich