CENTURY 30 SERIES INSTALLATION, OPERATION, MAINTENANCE & PARTS

Transcription

1 CENTURY L E G E N D A R Y L E A D E R S H I P OWNER'S MANUAL 30 SERIES INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities. CENTURY Miller Industries Towing Equipment Inc Hilltop Drive FORM NO Ooltewah, Tennessee REV. 4/05 PRICE $25.00 Phone (423) FAX (423)

2 LIMITED WARRANTY MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original purchaser that each new MILLER Carrier will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. The purchaser must promptly notify MILLER in writing of any failure in material or workmanship. In no event shall such notification be received by MILLER later than thirteen (13) months from date of delivery. The obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at our factory, or at a point designated by us, of such part or parts as shall appear to us upon inspection to be defective in material or workmanship. New or remanufactured parts will be used for any replacement. This warranty does not obligate MILLER to bear the cost of labor or transportation charges in connection with the replacement or repair of any parts found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless authorized by us. MILLER shall in no event be liable for any incidental or consequential damages or contingent arising out of the failure of any parts or products to operate properly. NO IMPLIED, EXPRESS, OR STATUTORY WARRANTY OTHER THAN STATED HEREIN IS MADE OR AUTHORIZED TO BE MADE BY OR FOR US, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MILLER makes no warranty, express or implied, as to finished products manufactured or supplied by another manufacturer or supplier by MILLER to purchaser, including, but not limited to, any vehicle to which a MILLER product may be affixed or accessories or wire rope (cable), and expressly disclaims any implied warranties of merchantability or fitness for a particular purpose as to such equipment or products. This language shall in no way affect or diminish the rights of purchaser to rely on such warranties as are extended by such manufacturers or suppliers. MILLER, whose policy is one of continuous improvement, reserves the right to improve its product through changes in design or materials as it may deem desirable without being obligated to incorporate such changes in products of prior manufacture. IT IS EXPRESSLY UNDERSTOOD THAT THERE IS NO IMPLIED WARRANTY THAT MILLER CARRIERS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PERSONS OR OTHER IMPROPER USE. THIS WARRANTY IS NOT TRANSFERABLE. Miller Industries Towing Equipment Inc Hilltop Drive Ooltewah, Tennessee Telephone (423) SERIAL NUMBER

3 Section VI - PARTS This Section is provided by the manufacturer for the purpose of ordering any component part of the 30 Series Car Carrier that may be required when part replacement is necessary. Be certain to use only original equipment replacement parts for warranty purposes as well as for keeping your 30 Series Car Carrier in its original state and optimum operating capacities. When ordering replacement or spare parts be sure to provide the following information to your carrier manufacturer authorized representative. 1. Manual Number & Date of Publication 2. Manual Page Number 3. Page Title 4. Reference Number of Part Desired 5. Part Number 6. Part Description 7. Quantity of Part Desired Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner without delay. Should additional information be required for repair or replacement of certain components, contact Miller Industries, Hermitage, PA, Phone: , FAX The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may change the specifications, models and feature availability. VI-1

4 STEEL BED ASSEMBLY VI-2

5 STEEL BED ASSEMBLY REF. NO. PART NO. REQ'D NUMBER DESCRIPTION 1 1 * CARRIER BED WELDMENT (REM. RAIL) WINCH - 10 TON PLANETARY WINCH CABLE ASSEMBLY 4 1 * CAB PROTECTOR WLDMT - SPECIFY CHASSIS COVER PLATE ANTI-TILT PLATE 7 1 * HOSE TRAY REAR REMOVABLE RAIL - STEEL 9 * MID REMOVABLE RAIL - STEEL 10 2 * FRONT REMOVABLE RAIL - STEEL 11 * LYNCH PIN BEARING PAD HOSE CLAMP WELDMENT MARKER LIGHT, AMBER (10205Y) MARKER LIGHT, RED (10205R) GROMMET, ROUND RUBBER MID BODY TURN SIGNAL JUNCTION BOX * CONTACT DISTRIBUTOR FOR ADDITIONAL INFORMATION VI-3

6 MOUNTING & TILT FRAME ASSEMBLY BEZEL TYPE LH RH HORIZONTAL S.S VERTICAL S.S HORIZONTAL BLK VERTICAL BLK VI-4

7 MOUNTING & TILT FRAME ASSEMBLY REF. NO. PART NO. REQ'D NUMBER DESCRIPTION 1 1 * TILT FRAME - W/L (TANDEM AXLE) 24' TILT FRAME - W/L (TANDEM AXLE) 26' & UP TAIL LIGHT HOUSING (RH) TAIL LIGHT MTG. BKT. (RH) ALL SERIES TAIL LIGHT HOUSING (LH) TAIL LIGHT MTG. BKT. (LH) ALL SERIES PLATE, LIGHT MOUNTING (RH) PLATE, LIGHT MOUNTING (LH) STOP & TURN LIGHT BACK-UP LIGHT GROMMET MARKER LIGHT, RED MARKER LIGHT GROMMET LICENSE PLATE ILLUMINATOR CONTROL PANEL ILLUMINATOR TOW LIGHT SOCKET BACK UP ALARM BACK UP ALARM GROMMET JUNCTION BOX CONTROL STA. DECAL, 4 SPOOL (LH) CONTROL STA. DECAL, 4 SPOOL (RH)) MUD FLAP ANGLE CONTROL BOX HOOD WLMT (LH) CONTROL BOX HOOD WLMT (RH) CONTROL BOX SUPP. CHANNEL (LONG) ITEMS #25, 26, 27 COMPLETE ASSY MUD FLAP MTG. BKT MOUNTING BRKT. WLMT BAR, MUD FLAP SUPPORT (S.S.) 28 2 * MUD FLAP 24" x 24" MOUNTING FRAME ( TANDEM) PIN, PIVOT (TANDEM AXLE) 31 * BEARING PAD MOUNTING ANGLE SPACER, MOUNTING BRACKET END CAP WELDMENT STABILIZER WELDMENT * CONTACT DISTRIBUTOR FOR ADDITIONAL INFORMATION VI-5

8 HYDRAULICS RETURN NOTE: SIZE OF COMPONENTS SHOWN ARE FOR ILLUSTRATION ONLY. VI-6

9 HYDRAULICS REF. NO. PART NO. REQ'D NUMBER DESCRIPTION OIL RESERVOIR (24' & UP) 2 1 * PTO PUMP (15 GPM) BED TILT CYLINDER LOCK VALVE HYD. FITTING 3/4" MORB x 3/4" FP LOCK VALVE CYLINDER, DOCK STABILIZER UP/DN CYLINDER, BED TILT VALVE BODY, 4 SPOOL CYLINDER, BED EXTEND SIGHT GLASS CAP, OIL RESERVOIR 13 * SKUFF JACKET HYDRAULIC FITTING 8MJ-16MB HYDRAULIC FITTING 1" HOSE BARB (MB) HYDRAULIC FITTING 8MJ-8MB HYDRAULIC FITTING 8MJ-8MJ HYDRAULIC FITTING 8MJ-8MB 90 DEG HYDRAULIC FITTING 6MJ-6MP 45 DEG HYDRAULIC FITTING 6MJ-6MB 90 DEG HYDRAULIC FITTING 4FP-4FP-4MP BRANCH "T" HEX BUSHING 3/8" x 1/4" (151157X) HYDRAULIC FITTING 6MJ-4MP 90 DEG LOCK ON STEM, 3/4" MALE NPT HOSE RETURN 3/4" x 20' LONG HOSE SUCTION 1" x 11' LONG HYDRAULIC FITTING 1" HOSE BARB (MP) HYDRAULIC FITTING 1" 90 DEG. STREET ELL HOSE 4M2T-6FJX-6FJX 1/4 x HOSE 4M3K 6FJX-6FJX 1/4 x HOSE 4M3K 6FJX-6FJX 1/4 x HOSE 8M3K 8FJX-8FJX 1/2 x HOSE 4M3K 6FJX-6FJX 1/4 x HOSE 8M3K 8FJX-8FJX 1/2 x HOSE 8M3K 8FJX-8FJX 1/2 x HOSE 6M3K 6FJX-6FJX 3/8 x HYDRAULIC FITTING 8MJ-10MB HYDRAULIC FITTING 6MJ-8MB IMMERSION FILTER ASSY IMMERSION FILTER ELEMENT HOSE 6M3K 6FJX-6FJX 3/8 x HOSE 6M3K 6FJX-6FJX 3/8 x HYDRAULIC FITTING 6MJ-4MP * CONTACT DISTRIBUTOR FOR ADDITIONAL INFORMATION VI-7

10 CONTROL & CROSSROD ASSEMBLY VI-8

11 CONTROL & CROSSROD ASSEMBLY REF. NO. PART NO. REQ'D NUMBER DESCRIPTION SPOOL CONTROL VALVE BRACKET, CONTROL HANDLE REAR OUTER CONTROL HANDLE REAR INNER CONTROL HANDLE FWD. INNER CONTROL HANDLE FWD. OUTER CONTROL HANDLE KNOB, BALL KNOB KNOB, "IN-OUT" RED (CABLE) NUT, 3/8" - 16 JAM END CAP, CONTROL HANDLE ROD CONTROL HANDLE ROD, 5/16" DIA. x 6-1/8" LG CLEVIS PIN, 5/16" DIA. x 1" LG WASHER, 5/16" FLAT SCREW, 3/8" - 16 x 1" HEX HEAD LOCKWASHER, 3/8" HELICAL NUT, 3/8" - 16 NYLON LOCK NUT, 3/8" - 16 TINNERMAN "J" CONTROL ROD LINK VALVE SHIFTER VALVE SHIFTER, ANTI TILT COTTER PIN, 1/8" x 3/4" LG SCREW, 3/8" - 16 x 4 LG. HEX HD. VI-9

12 BED LOCK ASSEMBLY REF. NO. PART NO. REQ'D NUMBER DESCRIPTION BULLET WELDMENT MOUNTING ANGLE BODY LOCK GUSSET BODY LOCK BASE TUBE STIFFENER PLATE BED LOCK ASSEMBLY VI-10

13 DOCK STABILIZER ASSEMBLY REF. PART NO. NUMBER DESCRIPTION DOCK STABILIZER WELDMENT (20/30S) VI-11

14 DOCK STABILIZER MOUNTING BRACKET 1 REF. NO. PART NO. REQ'D NUMBER DESCRIPTION MOUNTING BRACKET VI-12

15 HYDRAULIC WINCH 20,000 LB. PLANETARY REF. PART NO. NUMBER DESCRIPTION ,000 LB. PLANETARY WINCH VI-13

16 OPTIONAL LIGHTING ACCESSORIES 3 REF. NO. PART NO. REQ'D NUMBER DESCRIPTION SPOT LIGHT W/GASKET GROMMET, RUBBER NUT, 3/8"-16 NYLOK #10-24 X 1" MACHINE SCREW RUBBER CUSHION "T" BOLT ADAPTER VI-14

17 HYDRAULIC CYLINDERS REF. NO. PART NO. REQ'D NUMBER DESCRIPTION CYLINDER, BED EXTEND SEAL KIT, BED EXTEND CYLINDER REF. NO. PART NO. REQ'D NUMBER DESCRIPTION CYLINDER, BED TILT - 24' AND LONGER SEAL KIT, BED TILT CYLINDER VI-15

18 HYDRAULIC CYLINDERS REF. NO. PART NO. REQ'D NUMBER DESCRIPTION CYLINDER, DOCK STABILIZER SEAL KIT VI-16

19 LIGHT KIT REF. PART NO. NUMBER DESCRIPTION LIGHT, SEALED RED (STOP & TURN) LIGHT, SEALED WHITE (BACK-UP) TAIL LIGHT GROMMET REF. PART NO. NUMBER DESCRIPTION MARKER LIGHT GROMMET LIGHT, SEALED MARKER (RED) LIGHT, SEALED MARKER (AMBER) VI-17

20 LIGHT KIT REF. PART NO. NUMBER DESCRIPTION BULB, MARKER LIGHT LENS & HOUSING, RECTANGULAR MARKER PIGTAIL, MARKER LIGHT 12" RUBBER GASKET 5 GP132 LIGHT, AMBER MARKER, RECTANGULAR (COMPLETE) GP131 LIGHT, RED MARKER, RECTANGULAR (COMPLETE) REF. PART NO. NUMBER DESCRIPTION WORK LIGHT (COMPLETE) HOUSING, WORK LIGHT MOUNTING BRACKET MOUNTING SCREW LOCKWASHER PIVOT SCREW BULB, WORK LIGHT NUT VI-18

21 LIGHT KIT REF. PART NO. NUMBER DESCRIPTION 1 LT0118 LIGHT, AMBER MARKER, RECTANGULAR (COMPLETE) LT0119 LIGHT,RED MARKER, RECTANGULAR (COMPLETE) REF. PART NO. NUMBER DESCRIPTION RECTANGULAR WORK LIGHT (COMPLETE) HOUSING, WORK LIGHT MOUNTING BRACKET MOUNTING SCREW LOCKWASHER PIVOT SCREW BULB, WORK LIGHT NUT VI-19

22 LIGHT KIT 1 2 REF. PART NO. NUMBER DESCRIPTION LED MARKER LIGHT GROMMET VI-20

23 PTO Beacon Flash Work Up Work Down OPTIONAL DASHBOARD PANEL Ignition (Red) Power UP Switch Panel (backside) Battery High Amp Circuit Breaker From Factory Harness Marker Left Turn Right Turn Back Up Auxilary Power Protector 10 position Junction Box Battery Left Turn Right Trun Back Up 40A 20A 20A 20A VI-21

24 NOTES

25 NOTES

26 0.!)( 1 " (23) ") '#(4 536"( (7!" #$%! %&'() %**%++%%,-.-/0 123/,/ '*4 55#%++6!7 /1! %&'() %**%++%%,- %%76-8-,