PARTS MANUAL 3&5 SECTION FIELD CULTIVATORS. WIL-RICH PO Box 1030 Wahpeton, ND PH (701) Fax (701)

Transcription

1 PARTS MANUAL & SECTION FIELD SERIAL NUMBER 000 & UP Printed in USA () /0 CULTIVATORS WIL-RICH PO Box 00 Wahpeton, ND 0 PH (0) - Fax (0) - QX /XL & SECTION PARTS MANUAL /

2 WARRANTY The only warranty Wil-Rich gives and the only warranty the dealer is authorized to give is as follows: We warrant products sold by us to be in accordance with our published specifications or those specifications agreed to by us in writing at time of sale. Our obligation and liability under this warranty is expressly limited to repairing, or replacing, at our option, within months after date of retail delivery, any product not meeting the specifications. We make no other warranty, express or implied and make no warranty of merchantability or of fitness for any particular purpose. Our obligation under the warranty shall not include any transportation charges or costs or installation or any liability for direct, indirect or consequential damage or delay. If requested by us, products or parts for which a warranty claim is made are to be returned transportation prepaid to our factory. Any improper use, operation beyond rated capacity, substitution of parts not approved by us, or any alteration or repair by others in such manner as in our judgment affects the product materially and adversely shall void this warranty. No employee or representative is authorized to change this warranty in any way or grant any other warranty. Wil-Rich reserves the right to make improvement changes on any of our products without notice. When warranty limited or not applicable: Warranty on hoses, cylinders, hubs, spindles, engines, valves, pumps or other trade accessories are limited to the warranties made by the respective manufactures of these components. Rubber tires and tubes are warranted directly by the respective tire manufacturer only, and not by Wil-Rich. Warranty does not apply to any machine or part which has been repaired or altered in any way so as in the our judgment to affect its reliability, or which has been subject to misuse, negligence or accident. A Warranty Validation and Delivery Report Form must be filled out and received by Wil-Rich to initiate the warranty coverage. WARRANTY CLAIMS PROCEDURE. The warranty form must be returned to Wil-Rich within fifteen () working days from the repair date.. Parts returned to Wil-Rich without authorization will be refused. The parts must be retained at the dealership for ninety (0) days after the claim has been filed. If the Service Department would like to inspect the parts, a packing slip will be mailed to the dealer. The packing slip must be returned with the parts. The parts must be returned prepaid within thirty (0) days of receiving authorization. After the parts are inspected and warranty is verified, credit for the return freight will be issued to the dealer.. Parts that will be scrapped at the dealership will be inspected by a Wil-Rich Sales Representative, District Sales Manager or Service Representative within the ninety (0) day retaining period. QX /XL & SECTION PARTS MANUAL /

3 PERSONAL SAFETY IS IMPORTANT! ALL PERSONNEL INVOLVED WITH THE ASSEMBLY AND/OR OPERATION OF THIS EQUIPMENT MUST BE INFORMED OF PROPER SAFETY PROCEDURES. OPERATOR S/ ASSEMBLY MANUALS PROVIDE THE NECESSARY INFORMATION. IF THE MANUAL IS LOST FOR A PARTICULAR IMPLEMENT, ORDER A REPLACEMENT AT ONCE. OPERATOR S AND ASSEMBLY MANUALS ARE AVAILABLE AT NO CHARGE UPON RE- QUEST. This Safety Alert symbol means ATTENTION! BE- COME ALERT YOUR SAFETY IS INVOLVED! The Safety Alert symbol identifies important safety messages on the Wil-Rich Quad X Field Cultivator and in this manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety message. Why is SAFETY important to you? Big Reasons Accidents Disable and Kill Accidents Cost Accidents Can Be Avoided SIGNAL WORDS: DANGER WARNING CAUTION Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate signal word for each message has been selected using the following guidelines: An immediate and specific hazard which WILL result in severe personal injury or death if the proper precautions are not taken. A specific hazard or unsafe practice which COULD result in severe personal injury or death if the proper precautions are not taken Unsafe practices which COULD result in personal injury if proper practices are not taken, or as a reminder of good safety practices. ADDRESS INQUIRIES TO: WIL-RICH PO BOX 00 WAHPETON, ND 0 PH (0) - FAX (0) - QX /XL & SECTION PARTS MANUAL /

4 Orientation Any reference to left (L) or right (R) sides or components is to be understood as being viewed from behind the implement and looking forward. Serial Number Break Every implement has a serial number located on the frame. These serial numbers are consecutively assigned to the implements as they are manufactured. To aid in part ordering, we reference to the serial number at the point the change occurred to provide an accurate means of determining the proper parts. Modifications It is the policy of WIL-RICH Operations to improve its products whenever possible and practical to do so. We reserve the right to make changes, improvements, and modifications at any time without incurring the obligation to make such changes, improvements and modifications on any equipment sold previously. Abbreviations ASSY... Assembly ADP... Adaptor BLD... Blade BLT... Bolt BRKT... Bracket CTR... Center CP... Cup Point Dia... Diameter ELB... Elbow FC... Feild Cultivator (FF)... Female Female FJ... Female JIC FJX... Female JIC Swivel GR... Grade of Bolt HD... Heavy Duty HDWE... Hardware HYD... Hydraulic LH... Left Hand (MF)... Male Female MJ... Male JIC MF... Main Frame MTG... Mounting MORB... Male O-ring Boss MPT... Male Pipe Thread NC... National Course Thread NF... National Fine Thread NPT... National Pipe Thread REF... Reference RH... Right Hand SEC... Section S S... Screw Stop SST... Stainless Steel TA... Tandem TBP... Top Bypass W/... With W/O... Without GENERAL INFORMATION...,, & ASSEMBLY XL, & MAIN FRAME... QX & MAIN FRAME... XL, & HITCH ASSEMBLY... XL HITCH ASSEMBLY CONTINUED... QX & HITCH ASSEMBLY... 0 XL, & WING... XL -SECTION INNER WING... QX, & WING... QX -SECTION INNER WING... QX / XL & OUTER WING... QX / XL -SECTION OUTER WING HINGE... OUTER WING... FLOATING OUTER WING W/GAUGE WHEEL... FLOATING OUTER WING W/GAUGE WHEEL... -SECTION INNER WING LIFT COMPONENTS SECTION INNER WING LIFT COMPONENTS... -SECTION INNER WING LIFT COMPONENTS SERIAL # 0 & UP... PARALLEL LINK GAUGE WHEEL... QX PARALLEL LINK GAUGE WHEEL (MAIN)... QX PARALLEL LINK GAUGE WHEEL (WING).. - OUTER WING HYDRAULIC GAUGE WHEEL... - QX & XL MAIN AXLE & WKG TANDEM... -/, & -/ HUB & SPINDLE... GAUGE WHEEL HUB & SPINDLE... 0 XL WING REST... SHOVELS... DEPTH GAUGE... LIFT HYDRAULICS SINGLE POINT DEPTH CONTROL... SEQUENCE VALVE... HOSE CLAMP... STANDARD-CHECK VALVE W/O SINGLE POINT... -SEC XL MF W/ IW & OW SEC XL MF w/ IW & OW SEC XL MF w/ IW & OW SEC QX MF w/ IW & OW SEC QX MF w/ IW & OW SEC QX MF w/ IW & OW... - WING FOLD HYDRAULICS -SEC XL MF w/ IW & OW SEC XL MF w/ IW & OW SEC XL MF w/ IW & OW SEC QX MF w/ IW & 0W SEC QX MF w/ IW & OW SEC QX MF w/ IW & OW LIFT HYDRAULICS QX MF w/ WING... QX MF w/ & WING... QX MF w/ WING... QX /XL & SECTION PARTS MANUAL /

5 CONTENTS WING FOLD HYDRAULICS QX MF w/ WING... QX MF w/ & WINGS... QX MF w/ IW & & OW... QX MF w/ IW &, & OW... QX MF w/ WING... QX MF w/ IW &, & OW... 0 LIFT HYDRAULICS XL MF w/ WING... XL MF w/ WING... XL MF w/ WING... XL MF w/ & WING... XL MF w/ WING... WING FOLD HYDRAULICS XL MF w/ WING... XL MF w/ WING... XL MF w/ WING... XL MF w/ IW & & OW... XL MF w/ & WING... 0 XL MF w/ IW &, & OW... XL MF w/ IW &, & OW... XL MF w/ WING... XL MF w/ IW &, & OW... XL LIFT HYDRAULICS (SERIAL # 0 & UP) XL... XL 0... CONTENTS QX LIFT HYDRAULICS ( SN: 0 & UP) QX QX QX QX WING FOLD HYDRAULICS ( SN: 0 & UP) QX QX 0 & XL LIFT HYDRAULICS ( SN: 0 & UP) XL XL XL... - XL WING FOLD HYDRAULICS ( SN: 0 & UP) XL... - XL 0 &... - SHANKS TWIN SPRING SHANK ASSEMBLY... 0 SINGLE SPRING SHANK ASSEMBLY... REAR HITCH & BRACE ARMS... MUD SCRAPERS... GAUGE WHEEL SCRAPER... LIGHTS... TIRE ASSEMBLIES, RIMS,TIRE,&VALVE STEMS. DECALS... BLANK PAGE FOR NOTES... XL... XL... XL WING FOLD HYDRAULICS (SN # 0 & UP XL 0... XL 0 W/OUTER WINGS... 0 XL &... XL & W/ OUTER WING... LIFT HYDRAULICS QX (SERIAL # 0 & UP) QX... QX... QX... QX WING FOLD HYDRAULICS (SN # & UP) QX &... QX & W/OUTER WINGS... BLANK PAGE FOR NOTES... VALVE MOUNT (SERIAL # 0 & UP)... QX /XL & SECTION PARTS MANUAL /

6 , & XL MAIN FRAME ( SHOWN) 0 -/ REF FRONT FRAME BAR 0 MF AXLE SUPPORT ARM 0 FRONT FRAME BAR MAIN AXLE ASSY FRONT FRAME BAR MAIN AXLE ASSY FRONT FRAME BAR MAIN AXLE ASSY 00 MAIN FRAME MAST ANCHOR FOR. CYL MAIN FRAME / NC x -/ GR BOLT 0 WING REST WING REST (-SEC ONLY) WING REST ( OUTER WING) 0 BLT-U /-NCXX-/ Z 0 WING REST (SEC ONLY) SPIROL PIN / x-/ ( OUTER WING) 0 PIN (-/ x-/ ) 0 / NCx GR BOLT Standard Nuts and Lock Washers / BOLT PLATE -/ x-/ /NC Nut / Lock Washer 0 /NC Nut / Lock Washer 00 -/ SHANK STUB 0 /NC Nut 0 / Lock Washer 0 0 / NCx-/ GR BOLT /NC Nut / Lock Washer 0 -/ SHANK STUB 0 /NC Nut 0 / Lock Washer / NCx GR BOLT /NC Nut / Lock Washer 0 -/ x-/ x GA BUSHING Note: Standard nuts and lock washers are not called AXLE CLAMP ASSEMBLY out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

7 & QX MAIN FRAME ( SHOWN) 0 0 SEE PAGE FOR COMPONENT LIST 0 FRONT FRAME BAR FRONT FRAME BAR 00 MAIN FRAME MAIN FRAME 0 WING REST WING REST 0 BLT-U /-NCXX-/ Z SPIROL LOCK PIN 0 PIN (-/ x-/ ) 0 / NCx GR BOLT / BOLT PLATE -/ x-/ 00 -/ SHANK STUB 0 0 / NCx-/ GR BOLT 0 -/ SHANK STUB / NCx GR BOLT 0 -/ x-/ x GA BUSHING AXLE CLAMP ASSEMBLY MAIN MAST TUBE MAIN AXLE ASSY MAIN AXLE ASSY 00 CLEVIS ADJUST ROD / NC x -/ GR BOLT 0 AXLE ANCHOR (QUADX) 0 -/ NC JAM NUT WING REST (-SEC ONLY) ( OUTER WING) WING REST (SEC ONLY) ( OUTER WING) 00 Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

8 XL, ' & HITCH ASSEMBLY ( SHOWN) XL MAIN FRAME HITCH XL MAIN FRAME HITCH XL MAIN FRAME HITCH 0 PIN (-/ ODx-/ ) 0 ADJUSTER ASSEMBLY 0 MACHINERY BUSHING -/ x-/ x GA 0 PIN (-/ ODx-/ ) -/ NCx-/ GR BOLT -/ NC JAM NUT / NCx GR BOLT SPIROL PIN / x-/ 0 HOLE BOLT PLATE(. x. ) 00 HOLE DIAMOND PLATE 0 HOLE DIAMOND PLATE A 0 XL CENTER LIFT TUBE BRACKET B XL CENTER LIFT TUBE BRACKET 0 XL CENTER LIFT TUBE BRACKET 0 LINKAGE PLATE 0 / NCx x-/ U-BOLT QX /XL & SECTION PARTS MANUAL / 0 A B 0 ADJUSTMENT SCREW 0 HITCH TUBE - RIGHT ( & ) 00 HITCH TUBE - RIGHT ( ) 0 / NCx GR BOLT / NCx GR BOLT 0 0 PIN(-/ x-/ ) / MAIN FRAME 0 PIN(-/ x-/ ) FT MAIN FRAME CENTER HITCH BRACKET 00 PIN (-/ x-/ ) 0 PIN (x-/ ) SPRING TENSION BUSHING(-/ ) FLAT WASHER -/ NC JAM NUT 0 CENTER HITCH BRACKET 0 HITCH TUBE - LEFT( & ) 0 HITCH TUBE - LEFT ( ) 0 HITCH TUBE ( ) 0 HITCH TUBE ( ) 0 HITCH TUBE ( ) 0 / NCx GR BOLT 0 CENTER FRAME HITCH ATTACH Standard Nuts and Lock Washers 0 /NC Nut /NC Nut / Lock Washer / Lock Washer 0 /NC Nut 0 / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out.

9 XL HITCH ASSEMBLY CONTINUED 0 0 FT MF ONLY 000 -/ NCX-/ HITCH BOLT CAST DUAL HITCH JACK SAFETY CHAIN 0 PERFECT HITCH 0 PERFECT HITCH-BASE 0 PERFECT HITCH-CLEVIS / X COTTER PIN 0 / NC X HEX BOLT NC CENTER LOCK NUT 0 -/ NC SLOTTED NUT 0 0 / NC X -/ HEX BOLT NC X GR HEX BOLT / NC X / HEX BOLT 0 / NC X X U-BOLT 0 CUSHION CLAMP / BASE PLATE / COVER PLATE / PLUG HOLDER STORAGE TUBE-MANUAL 0 RUBBER EDGE 0 HYDRAULIC HOSE BRACKET Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. 00 CUSHION CLAMP / 0 BASE PLATE / 0 COVER PLATE / 0 XL HITCH XL HITCH CAT HITCH QX /XL & SECTION PARTS MANUAL /

10 QX & HITCH ASSEMBLY ( SHOWN) RIGHT HITCH TUBE ( ) 0 RIGHT HITCH TUBE ( ) 0 LEFT HITCH TUBE ( ) 0 LEFT HITCH TUBE ( ) / NCx GR BOLT 0 PLATE ( ) 00 PLATE ( ) 0 HITCH TUBE 0 HITCH TUBE -/ NCx-/ GR BOLT / NCx GR BOLT 0 QX HITCH QX HITCH -/ NCX-/ HITCH BOLT 0 SAFETY CHAIN / X COTTER PIN JACK 0 -/ NC SLOTTED NUT -/ NC JAM NUT CAST DUAL HITCH HYDRAULIC HOSE BRACKET 0 RUBBER EDGE PLUG HOLDER 0 / NC X HEX BOLT 0 0 / NC X X U-BOLT STORAGE TUBE-MANUAL / NC X / HEX BOLT 0 / NC X -/ HEX BOLT 0 CUSHION CLAMP / BASE PLATE / COVER PLATE / 00 CUSHION CLAMP / 0 BASE PLATE / 0 COVER PLATE / Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL / 0

11 XL, ', & WING WING SHOWN 0 SEE PAGE 0 FOR COMPONENT LIST -/ REF 0 SEE PAGE FOR COMPONENT LIST WING RIGHT WING LEFT WING RIGHT WING LEFT 0 " WING RIGHT 0 " WING LEFT (SHOWN) WING FRONT RIGHT WING FRONT LEFT WING FRONT RIGHT WING FRONT LEFT 0 WING RIGHT 0 WING LEFT (SHOWN) 0 / NCx-/ GR BOLT 0 -/" SHANK STUB 0. MAST ANCHOR / NCx GR BOLT AXLE CLAMP ASSY 0 NC NYLON LOCK NUT 0 ADJUSTMENT ROD 0 0 PIN (-/ x-/ ) ROLL PIN / x-/ 0 WING ADJUST ARM WING AXLE (SEE PAGE ) 0 MACHINERY BUSHING (-/ x-/ x GA.) PIN x-/ 0 GAUGE TUBE ADJUST BRKT 0 NCx-/ GR BOLT ADJUSTER ROD (.) -/ NC JAM NUT " FLAT WASHER 0 0 XL WING TUBE 0 0 / NCx GR BOLT 0 / NCx x-/ U-BOLT / NCx x-/ U-BOLT / NCx-/ GR BOLT 0 PLATE ( ) 000 Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

12 XL SECTION INNER WING SEE PAGE 0R FOR COMPO- NENT LIST 0 0 SEE PAGE FOR COMPONENT LIST WING RIGHT 0 WING LEFT (SHOWN) BOLT PLATE 0 / NCx GR BOLT 00 -/ SHANK STUB 0 SEC FRONT WING BAR -RH 0 / NCx-/ GR BOLT 0 SEC FRONT WING BAR - LH 0 -/ SHANK STUB (. ) WING FOLD STUB AXLE CLAMP ASSY 0 / NCx x-/ U-BOLT / NCx GR BOLT XL SEC OUTER WING REST 0 PLATE ANCHOR STRAP 0 NC NYLON LOCK NUT NC X -/ GR BOLT 0 0 ADJUSTMENT ROD 0 / NC X -/ GR BOLT 0 PIN (-/ x-/ ) SPIROL PIN / x-/ 0 WING ADJUST ARM 0 MACHINERY BUSHING (-/ x-/ x GA.) 0 XL SEC HINGE ASSY RH FRONT 0 XL SEC HINGE ASSY LH FRONT 0 GAUGE TUBE ADJUST BRACKET Standard Nuts and Lock Washers /NC Nut / Lock Washer NCx GR BOLT 0 /NC Nut / Lock Washer ADJUSTER ROD (.) 0 /NC Nut 0 / Lock Washer -/ NC JAM NUT /NC Nut / Lock Washer 0 XL SEC HINGE ASSY RH REAR 0 /NC Nut 0 / Lock Washer XL SEC HINGE ASSY LH REAR /NC Nut / Lock Washer Note: Standard nuts and lock washers are not called 0 XL WING TUBE 0 out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

13 QX, ' & WING LEFT WING (SHOWN) SEE PAGE 0 FOR COMPONENT LIST SEE PAGE FOR COMPONENT LIST WING RIGHT WING LEFT " WING RIGHT " WING LEFT 0 WING RIGHT 0 WING LEFT (SHOWN) / BOLT PLATE (-/ X-/ ) WING RIGHT WING LEFT WING RIGHT WING LEFT 0 WING RIGHT 0 WING LEFT (SHOWN) 0 / NCx-/ GR BOLT 0 -/" SHANK STUB MAST ANCHOR FOR 0 CYL / NCx GR BOLT AXLE CLAMP ASSY 0 NC NYLON LOCK NUT 0 0 ADJUSTMENT ROD 0 PIN (-/ x-/ ) SPIROL PIN 0 WING ADJUST ARM 0 MACHINERY BUSHING (-/ x-/ x GA.) PIN x-/ 0 GAUGE TUBE ADJUST BRACKET NCx GR BOLT ADJUSTER ROD (.) -/ NC JAM NUT 0 " FLAT WASHER 0 QUADX WING TUBE 0 / NCx GR BOLT / NC x -/ GR BOLT / NCx-/ GR BOLT 0 PLATE Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. WING AXLE (SEE PAGE ) QX /XL & SECTION PARTS MANUAL /

14 QX SECTION INNER WING SEE PAGE OR FOR COMPO- NENT LIST 0 SEE PAGE FOR COMPONENT LIST 0 WING AXLE (SEE PAGE ) WING RIGHT 0 WING LEFT (SHOWN) BOLT PLATE 00 -/ SHANK STUB 0 / NCx-/ GR BOLT 0 -/ SHANK STUB AXLE CLAMP ASSY / NCx GR BOLT 0 / NCx x-/ U-BOLT 0 NC NYLON LOCK NUT 0 0 ADJUSTMENT ROD 0 PIN (-/ x-/ ) SPIROL PIN 0 WING ADJUST ARM 0 MACHINERY BUSHING (-/ x-/ x GA.) 0 SEC HINGE ASSY RH FRONT 0 SEC HINGE ASSY LH FRONT 0 GAUGE TUBE ADJUST BRACKET NCx GR BOLT ADJUSTER ROD (.) -/ NC JAM NUT 0 SEC HINGE ASSY RH REAR SEC HINGE ASSY LH REAR 0 -SEC WING TUBE 0 NC NUT 0 / NCx GR BOLT SEC FRONT WING BAR -RH SEC FRONT WING BAR - LH SEC INNER WING STOP SEC OUTER WING REST ANCHOR STRAP NC X -/ GR BOLT / NC X -/ GR BOLT Standard Nuts and Lock Washers 0 /NC Nut /NC Nut / Lock Washer / Lock Washer 0 /NC Nut 0 / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

15 QX /XL OR OUTER WING (RIGHT SHOWN) 0 00 WING RIGHT WING LEFT " WING RIGHT " WING LEFT (SHOWN) SEC XL/QX OUTER HINGE - L SEC XL/QX OUTER HINGE - R WING FRONT RIGHT WING FRONT LEFT WING FRONT RIGHT WING FRONT LEFT (SHOWN) 0 / NCx-/ GR BOLT 0 / NCx-/ GR BOLT 0 / NCx x-/ U-BOLT NCx-/ GR BOLT 0 NC NYLON LOCK NUT 0. MAST ANCHOR 0 0 / NCx GR BOLT 0 -SEC WING TUBE 0 0 WING ADJUST ARM Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. GAUGEWHEEL & AXLE COMPO- NENTS ARE SAME AS SECTION " WING, PAGE QX /XL & SECTION PARTS MANUAL /

16 QX /XL SECTION OUTER WING HINGE SPRING(-/ x-/ ) SEC OUTER WING LATCH - RH (SHOWN) SEC OUTER WING LATCH - LH SEC OUTER WING LINK PIN ( ODx-/ ) 0 WING ARM FLAT WASHER NCx GR BOLT / x-/ SPIROL PIN 0 NCx-/ GR BOLT 0 0 / NCx GR BOLT 0 NYLON LOCK NUT 00 SHANK SPACER / NCX X-/ U-BOLT Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

17 ' OUTER WING OUTER WING - RH OUTER WING - LH (SHOWN) WING HINGE 0 NC NYLON TOPLOCK NUT NCx GR BOLT 0 / NCx x-/ U-BOLT 0 OUTER WING REST PLATE NCx GR BOLT 0 LINKAGE ARM Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. 0 SPIROL PIN (/ X -/) PIN ( x-/ ) FLAT WASHER SHIM / NCx-/ GR BOLT / NCx-/ GR BOLT 0 WING HINGE RIGHT 0 WING HINGE LEFT (SHOWN) QX /XL & SECTION PARTS MANUAL /

18 FLOATING OUTER WING W/GAUGE WHEEL 0 SEE PAGE NOTE: HYDRAULIC OUTER GAUGE WHEEL IS SHOWN ON PAGE OUTER WING - RH OUTER WING - LH (SHOWN) / NCx-/ GR BOLT 0 NC NYLON TOPLOCK NUT NCx GR BOLT 0 / NCx x-/ U-BOLT 0 OUTER WING REST PLATE NCx GR BOLT 0 LINKAGE ARM 0 SPIROL PIN (/ X -/ ) PIN ( x-/ ) FLAT WASHER TOP ADJUSTMENT ASSEMBLY / NCx-/ x-/ U-BOLT GAUGE WHEEL LEG 0 / NF LOCK NUT QX /XL & SECTION PARTS MANUAL / 0 Lx BLT PLY WHL ASSY 0 x WHEEL RIM Lx PLY TUBELESS TIRE 0 VALVE STEM -BOLT HUB & SPINDLE (-/ ) / NFx GR BOLT 0 / NCx x-/ U-BOLT / NCx-/ GR BOLT WING STOP FOLD BACKING PLATE 0 SADDLE STUB WING HINGE 0 WING HINGE RIGHT 0 WING HINGE LEFT (SHOWN) SHIM

19 FLOATING OUTER WING W/GAUGE WHEEL 0 NOTE: HYDRAULIC OUTER GAUGE WHEEL IS SHOWN ON PAGE 0 SEE PAGE 000 OUTER WING - RH OUTER WING - LH (SHOWN) / NCx-/ GR BOLT 0 NC NYLON TOPLOCK NUT NCx GR BOLT 0 / NCx x-/ U-BOLT 0 OUTER WING REST PLATE NCx GR BOLT 0 LINKAGE ARM 0 SPIROL PIN (/ X -/ ) PIN ( x-/ ) FLAT WASHER TOP ADJUSTMENT ASSEMBLY / NCx-/ x-/ U-BOLT GAUGE WHEEL LEG 0 / NF LOCK NUT 0 Lx BLT PLY WHL ASSY 0 x WHEEL RIM Lx PLY TUBELESS TIRE 0 VALVE STEM -BOLT HUB & SPINDLE (-/ ) / NFx GR BOLT 0 / NCx x-/ U-BOLT / NCx-/ GR BOLT WING STOP FOLD WING HINGE 0 WING HINGE RIGHT 0 WING HINGE LEFT (SHOWN) QX /XL & SECTION PARTS MANUAL /

20 -SECTION INNER WING LIFT COMPONENTS 0 --LAYOUT.PLT 00 LIFT LINK ARM( & WING) - SHORT 0 LIFT LINK ARM - LONG( WING) FLAT WASHER 0 NC NYLON TOPLOCK NUT NCx-/ GR BOLT WING LIFT LINK C TO C 0 WING LIFT LINK. C TO C WING LIFT BUSHING (.0 ID x -/ OD x.0 ) NCx-/ GR BOLT NCx GR BOLT / NCx-/ GR BOLT 0 0 WING LINK STRAP 0 (. ) WING FOLD STUB 0 (.0 ) WING FOLD STUB 0 / NCx x-/ U-BOLT QX /XL & SECTION PARTS MANUAL / 0 Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out.

21 -SECTION INNER WING LIFT COMPONENTS SERIAL # S UP TO 0 00-C 0 LIFT LINK ARM ( SECTION) FLAT WASHER 0 NC NYLON TOPLOCK NUT 0 NCx-/ GR BOLT WING LIFT LINK ( SECTION) WING LIFT BUSHING (.0 ID x -/ OD x.0 ) NCx-/ GR BOLT NCx GR BOLT / NCx-/ GR BOLT 0 WING LINK STRAP ( SECTION) INNER WING FOLD STOP ( SECTION) Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

22 SECTION INNER WING HINGE SERIAL # S 0 AND UP NCx-/ GR BOLT 0 NC NYLON TOPLOCK NUT 0 LINK LIFT ARM ( -/ ) 0 LINK LIFT ARM (-/ ) NCx GR BOLT WING LIFT BUSHING (.0 ID x -/ OD x.0 /NCx-/ GR BOLT WING LIFT LINK 0 WING LINK STRAP NCx-/ GR BOLT 0 INNER WING FOLD STOP ( SECTION) 0 / U-BOLT QX /XL & SECTION PARTS MANUAL /

23 PARALLEL LINK GAUGE WHEEL (ITEM NOT SHOWN SEE PAGE ) BREAK PLATE 0 / NCx-/ GR BOLT NCx-/ GR BOLT 00 GAUGE WHEEL PIVOT BRACKET / NCx-/ GR BOLT 0 NC NYLON TOPLOCK NUT / NCx x-/ U-BOLT 0 GAUGE WHEEL MOUNT 0 / NCx x-/ U-BOLT 0 00 UPPER GAUGE WHEEL ARM 00 LOWER GAUGE WHEEL ARM 00 CASTER WHEEL LEG RED SET SCREW (/-NC X /) SPRING ( DIA X LONG) -BOLT HUB & SPINDLE (-/ ) 0 Lx WHEEL ASSY B PLY 0 x RIM BOLT Lx TUBELESS TIRE PLY 0 VALVE STEM ASSY TR STOP COLLAR 0 / GREASE FITTING INNER BREAK PLATE /NC NLK NUT 0 / NC X GRD BOLT BREAK ASSY ADJUSTMENT ROD JAM NUT 0 ADJUSTMENT ROD 0 GAUGE WHEEL ADJUST BRKT NC NUT Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

24 QX PARALLEL LINK GAUGE WHEEL (MAIN FRAME) Also see page SEE PAGE 0 FOR HUB & SPINDLE CENTER FRAME (LEFT & RIGHT) TOP LINK ARM (") GAUGE WHEEL PIVOT HEADLESS PIN -/ X-/ -/ COMPRESSION SPRING GAUGE WHEEL MAST LOWER MAST PLATE 0 YOKE (") / NCx GR BOLT 0 / NF GREASE FITTING 0 / NCx-/ GR BOLT / NC NYLON TOPLOCK NUT ROLL PIN / X -/ / NF GREASE FITTING 0 CENTER LIFT ARM - RIGHT CENTER LIFT ARM - LEFT DAMPER BRAKE PAD DAMPER CAP HEADLESS PIN / X -/ 0 x. B PLY WHL ASSY x0 B WHEEL RIM 0 x. PLY TUBELESS TIRE 0 VALVE STEM ASSEMBLY 0 / FLAT WASHER Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called TOP DAMPER BRACKET out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

25 QX PARALLEL LINK GAUGE WHEEL (WING) 0 --LAYOUT.PLT also see page SEE PAGE 0 FOR HUB & SPINDLE WING FRAME ( SECTION UNITS ONLY) TOP LINK ARM (") GAUGE WHEEL MAST / NCx GR BOLT 0 LOWER OUTER GAUGE ARM PIVOT PIN / NCX-/ GR BOLT 0 YOKE (") 0 / NF GREASE FITTING GAUGE WHEEL PIVOT 0 / NCx GR BOLT 00 COLLAR / NF GREASE FITTING LOWER MAST PLATE Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. 0 x. B PLY WHL ASSY x0 B WHEEL RIM 0 x. PLY TUBELESS TIRE 0 VALVE STEM ASSEMBLY QX /XL & SECTION PARTS MANUAL /

26 OUTER WING HYDRAULIC GAUGE WHEEL 0 0 OUTER FLOATING WING HYD GAGE WHEEL.DWG 0 SEE PAGE FOR -/ HUB & SPINDLE INNER BREAK PLATE BREAK PLATE NCx-/ GR BOLT 00 GAUGE WHL PIVOT BRKT SET SCREW 0 NC NYLON TOPLOCK NUT / NCx x-/ U-BOLT 0 GAUGE WHEEL MOUNT 0 OUTER WING ANCHOR-RH 0 / NCx x-/ U-BOLT OUTER WING ANCHOR-LH(SHOWN) 0 00 UPPER GAUGE WHEEL ARM NCx GR BOLT LOWER GAUGE WHEEL ARM -/ STOP COLLAR 00 CASTER WHEEL LEG RED / x-/ ROLL PIN / NCx GR BOLT x-/ HEADLESS PIN SPRING / FLAT WASHER 0 Lx WHEEL ASSY B PLY -/ NC JAM NUT 0 x RIM BOLT / NFx GR BOLT Lx TUBELESS TIRE PLY 0 / NF NUT 0 VALVE STEM ASSY TR / NCx GR BOLT STOP COLLAR 0 / NC LOCK NUT 0 / GREASE FITTING 0 / NCx-/ GR BOLT 0F HYD CYLINDER x. W/TOP BP / NCx-/ GR BOLT 0 SEAL KIT BREAK ASSY ADJUST ROD QX /XL & SECTION PARTS MANUAL /

27 HYDRAULICS-OUTER GAUGE WHEEL RETURN HOSE 0000 UNION MJ x MJ / x0 FF HYD HOSE () 0 ELB MORB x MJ QX /XL & SECTION PARTS MANUAL /

28 QX & XL MAIN AXLE & WALKING TANDEM 0.PLT also see page EXCEL MAIN FRAME AXLE 0 MAIN FRAME AXLE (SHOWN) 0 0 MAIN FRAME AXLE HD WALKER ASSY -RH (INCLUDES ITEM & ) SEC HD WALKER ASSY-/ -RH (INCLUDES ITEM & ) / NCx-/ GR BOLT 0. MAST ANCHOR 0 / NF LOCK NUT -BOLT HUB & SPINDLE (SEE PAGE ) -BOLT HUB & -/ SPINDLE (SEE PAGE ) 0.Lx WHEEL ASSY B PLY 0 x RIM BOLT.Lx TIRE PLY 0 VALVE STEM ASSY TR Lx WHEEL ASSY B PLY 0 x RIM BOLT 0 Lx TIRE PLY 0 VALVE STEM ASSY TR 0 x.0- WHEEL ASSY PLY x0 RIM BOLT 0 x.0- TIRE PLY 0 VALVE STEM ASSY 0 x 0 BOLT RIM TIRE & RIM -SEC (HWY TIRE) 0 QX /XL & SECTION PARTS MANUAL / NOTE: WING WALKING TANDEM COMPONENTS ARE THE SAME AS THE MAIN AXLE WALKING TAN- DEM. 0 AXLE ANCHOR (QUAD X) HD WALKER ASSY -LH (INCLUDES ITEM & ) SEC HD WALKER ASSY-/ -LH (INCLUDES ITEM & ) 0 0. BORE BRG CONE (0) BEARING BUSHING 0 SEAL REPLACE BY TANDEM PIN 0 -/ NF HYDRA LOCK NUT 0. OD BEARING CUP (NOT SHOWN) 0 / NF GREASE FITTING 0 RIGHT WING AXLE 0 LEFT WING AXLE (SHOWN) 0 PIN ( x. ) " FLAT WASHER 0 / x-/ SPIROL PIN / NCx-/ GR BOLT. MAST ANCHOR (EXCEL) 0. MAST ANCHOR

29 -/", " & -/" HUB & SPINDLE 0 -/" HUB & SPINDLE (INCLUDES ITEMS - & -) " HUB & SPINDLE (INCLUDES ITEMS - & -) -/" HUB & SPINDLE (INCLUDES ITEMS - & -) 0 / x-/ COTTER PIN / x COTTER PIN (-/") 0 / SPINDLE WASHER 00 HARD WR -/ ODx-/ ID(-/") 0 OUTER BEARING CONE 0 OUTER BEARING CONE (-/") 0 OUTER BEARING CUP 0 OUTER BEARING CUP (-/") 0 -BOLT HUB SPINDLE (INCLUDES ITEMS, &) 00 BOLT HUB -/" SPINDLE (INCLUDES ITEMS,, & ) 0 BOLT HUB -/" SPINDLE (INCLUDES ITEMS,, & ) / NPT GREASE FITTING / GREASE FITTING (-/") " TRIPLE LIP SEAL -/" TRIPLE LIP SEAL -/ SPINDLE SEAL -/" SPINDLE " AXLE SPINDLE -/" AXLE SPINDLE / NCx GR BOLT (-/") / NFx-/ GR BOLT (") / NFx GR BOLT (-/") 0 0 / NF LOCK NUT / NC LOCK NUT 0 INNER BEARING CONE (-/") INNER BEARING CONE (") INNER BEARING CONE (-/") 0 INNER BEARING CUP (-/") INNER BEARING CUP (") INNER BEARING CUP (-/") / NFx 0 WHEEL BOLT / NFx-/ WHL BOLT (-/") 0 / NF SLOTTED NUT NF SLOTTED NUT (-/") DUST CAP 0 HUB CAP (-/ ) WEAR SLEEVE (-/") QX /XL & SECTION PARTS MANUAL /

30 GAUGE WHEEL HUB & SPINDLE 0 0 YOKE HUB ASSEMBLY (" SPINDLE) 0 " INTERNAL TRIPLE LIP SEAL / NPT GREASE FITTING 0 -/ DIAx SPINDLE BEARING CONE 0 BEARING CUP -BOLT HUB W/CUPS (INCLUDES ITEM ) REPLACE BY / NFx-/ WHEEL BOLT 00 ODx SEALED SPINDLE TUBE MUST ORDER ITEM WITH TUBE 0 SPINDLE LOCK 0 NF SLOTTED NUT / x COTTER PIN O-RING (REQ. W/00) QX /XL & SECTION PARTS MANUAL / 0

31 XL WING REST AND WING RESTS ARE SHOWN WITH THEIR RESPECTIVE MAIN FRAMES 0 WING REST 0 / NCx x-/ U-BOLT 0 / NCx x-/ U-BOLT FRONT WING REST( WING) Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

32 SHOVELS A B 0 ITEM PART NO DESCRIPTION FC SHOVEL EXT (REF. ITEMS,,,, & KIT EXTENSION CONTAINS HDWE FOR SHOVELS) A PLOW BOLT /NCX-/ GR B PLOW BOLT /NCX-/ GR PLOW BOLT /NCX-/ GR " TERMINATOR SWEEP STEM ANGLE W/HWDR " TERMINATOR SWEEP STEM ANGLE W/ HDWR /NCX-/ BOLT FC SHOVEL EXTENSION / FLAT WASHER /NC NUT 0 REVERSIBLE SPIKE W/HDWR QX /XL & SECTION PARTS MANUAL /

33 DEPTH GAUGE 0.PLT 0 DEPTH GAUGE -/ EXHAUST CLAMP 0 DEPTH INDICATOR ARM 0 ANGLE / NCx x-/ U-BOLT / NCx/ GR BOLT / NC LOCK NUT Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer /NC Nut / Lock Washer 0 /NC Nut /NC Nut 0 / Lock Washer / Lock Washer Note: Standard nuts and lock washers are not called out. Anything other than standard will be called out. QX /XL & SECTION PARTS MANUAL /

34 SINGLE POINT DEPTH CONTROL 0 REAR VIEW 0 FRONT VIEW RETURN LINE 000 TO BASE END OF. MF LIFT CYLINDER 0 USED WITHOUT SINGLE POINT DEPTH CONTROL SINGLE POINT DCV ASSY REPAIR KIT 0 ADJUST EAR BENT TUBE SLIDE ADJUST SINGLE POINT BRACKET SINGLE POINT TUBE-SHORT HYD HOSE / x0 FJX-FJX ADP MJ X MPT ELB MJ X MPT 0 0 / NC x GR BOLT CHECK VALVE / NC LOCK NUT / NC LOCK NUT 0 / NCx-/ GR BOLT 0 / NC LOCK NUT / NC JAM NUT / NC NYLON LOCK NUT / x-/ ROLL PIN / NCx-/ GR BOLT 0 / NCx-/ GR BOLT / NCx-/ GR BOLT 0 / x-/ ROLL PIN 0 SPRING PIN ADJUST CRANK VALVE SPACER SPACER TUBE 0 ADP MORB X MJ TEE MORB X MJ X MJ VALVE MNT 0 INNER TUBE QX /XL & SECTION PARTS MANUAL /

35 SEQUENCE VALVE BUTT END, RIGHT INNER WING FOLD CYLINDER BUTT END, RIGHT OUTER WING FOLD CYLINDER BUTT END, LEFT OUTER WING FOLD CYLINDER ROD END, RIGHT INNER WING FOLD CYLINDER BUTT END, LEFT (FRONT) INNER WING FOLD CYLINDER ROD END, (FRONT) LEFT INNER WING FOLD CYLINDER ROD END, LEFT INNER WING FOLD CYLINDER ADP MORB x FJX 0 CROSS MJ TEE MJ X MJ x MORB 0 SEQUENCE VALVE QX /XL & SECTION PARTS MANUAL /

36 HOSE CLAMP / NUT (0) BASE PLATE () /x FF HOSE () / NUT (0) / LK WSHR () TUBE CLAMP () /x-/ CRG BLT () SINGLE STACK /x-/ CRG BLT () DOUBLE STACK /x-/ CRG BLT () TRIPPLE STACK QX /XL & SECTION PARTS MANUAL /

37 STANDARD - CHECK VALVE WITHOUT SINGLE POINT RETURN LINE TO BASE END OF. MF LIFT CYLINDER / X -/ NC HEX BOLT / NC LOCK NUT HOSE / X 0 F JX-FJX VALVE MNT (ONLY USE WITH OUT SINGLE POINT) 0 / X NC HEX BOLT TEE MORB X MJ X MJ (PORT ) 0 ADP MORB X MJ (PORT ) CHECK VALVE 0 ADP MORB X MJ (PORT ) QX /XL & SECTION PARTS MANUAL /

38 MF w/ INNER WING OUTER WING SECTION XL DEPTH CONTROL HYDRAULICS SERIAL # NOTE: ROD END UP ON LIFT CYLINDERS SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x0 FF 0 HYD HOSE / x FF 00 HYD HOSE / x00 FF 0 F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

39 MF w/ INNER WING OUTER WING SECTION XL DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 00 QX /XL & SECTION PARTS MANUAL /

40 MF w/ INNER WING & OUTER WING SECTION XL DEPTH CONTROL HYDRAULICS SERIAL # ADD / x 0 () MF HYD HOSE FOR OUTER WINGS NOTE: ROD END UP ON LIFT CYLINDERS SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 00 HYD HOSE / x00 FF 00 HYD HOSE / x FF 0 F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL / 0

41 MF w/ INNER WING & OUTER WING SECTION XL DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 00 QX /XL & SECTION PARTS MANUAL /

42 MF w/ INNER WING & OUTER WING SECTION XL DEPTH CONTROL HYDRAULICS SERIAL # ADD / x 0 () MF HYD HOSE FOR OUTER WINGS NOTE: ROD END UP ON LIFT CYLINDERS SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF 00 HYD HOSE / x00 FF 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 0 HYD HOSE / x0 FF F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

43 MF w/ INNER WING & OUTER WING SECTION XL DEPTH CONTROL HYDRAULICS SERIAL # QX /XL & SECTION PARTS MANUAL /

44 MF w/ INNER WING OUTER WING SECTION QX DEPTH CONTROL HYDRAULICS SERIAL # NOTE: ROD END UP ON LIFT CYLINDERS SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 HYD HOSE / x FF 00 HYD HOSE / x FF F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

45 MF w/ INNER WING OUTER WING SECTION QX DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 000 QX /XL & SECTION PARTS MANUAL /

46 MF w/ INNER WING & OUTER WING SECTION QX DEPTH CONTROL HYDRAULICS SERIAL # ADD / x 0 () MF HYD HOSE FOR OUTER WINGS NOTE: ROD END UP ON LIFT CYLINDERS SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 00 HYD HOSE / x00 FF 00 HYD HOSE / x FF F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

47 MF w/ INNER WING & OUTER WING SECTION QX DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 000 QX /XL & SECTION PARTS MANUAL /

48 MF w/ INNER WING & OUTER WING SECTION QX DEPTH CONTROL HYDRAULICS SERIAL # ADD / x 0 () MF HYD HOSE FOR OUTER WINGS NOTE: ROD END UP ON LIFT CYLINDERS SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 00 HYD HOSE / x00 FF HYD HOSE / x0 FF 0 HYD HOSE / x0 FF F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

49 MF w/ INNER WING & OUTER WING SECTION QX DEPTH CONTROL HYDRAULICS SERIAL # QX /XL & SECTION PARTS MANUAL /

50 MF w/ INNER WING OUTER WING SECTION XL WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 TEE MJ X MJ X FJX 00 ADP MORB X FJX 0F HYD CYL X0 FGS #ACY0 0 CROSS MJ x MJ x MJ x MJ SEAL KIT IN (FGS-SK-ACBXQQ) TEE MJ x MJ x MORB F HYD CYL X0 FGS #ACY0 ELB MJ X FJX 0 SEAL KIT IN (FGS-SK-ACBSQS) HYD HOSE / x FF 0 00 HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF QX /XL & SECTION PARTS MANUAL / 0

51 MF w/ INNER WING OUTER WING SECTION XL WING FOLD HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 00 QX /XL & SECTION PARTS MANUAL /

52 MF w/ INNER WING & OUTER WING SECTION XL WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 TEE MJ X MJ X FJX 00 ADP MORB X FJX 0F HYD CYL X0 FGS #ACY0 0 CROSS MJ x MJ x MJ x MJ SEAL KIT IN (FGS-SK-ACBXQQ) TEE MJ x MJ x MORB F HYD CYL X0 FGS #ACY0 ELB MJ X FJX 0 SEAL KIT IN (FGS-SK-ACBSQS) HYD HOSE / x FF 0 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF QX /XL & SECTION PARTS MANUAL /

53 MF w/ INNER WING & OUTER WING SECTION XL WING FOLD HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 00 QX /XL & SECTION PARTS MANUAL /

54 MF w/ INNER WING & OUTER WING SECTION XL WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 TEE MJ X MJ X FJX 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB ELB MJ X FJX HYD HOSE / x FF 0 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF 0F HYD CYL X0 FGS #ACY0 SEAL KIT IN (FGS-SK-ACBXQQ) F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL /

55 MF w/ INNER WING & OUTER WING SECTION XL WING FOLD HYDRAULICS SERIAL # QX /XL & SECTION PARTS MANUAL /

56 MF w/ INNER WING OUTER WING SECTION QX WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 TEE MJ X MJ X FJX 00 ADP MORB X FJX 0F HYD CYL X0 FGS #ACY0 0 CROSS MJ x MJ x MJ x MJ SEAL KIT IN (FGS-SK-ACBXQQ) TEE MJ x MJ x MORB F HYD CYL X0 FGS #ACY0 ELB MJ X FJX 0 SEAL KIT IN (FGS-SK-ACBSQS) HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF QX /XL & SECTION PARTS MANUAL /

57 MF w/ INNER WING OUTER WING SECTION QX WING FOLD HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 0 00 QX /XL & SECTION PARTS MANUAL /

58 MF w/ INNER WING & OUTER WING SECTION QX WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 TEE MJ X MJ X FJX 00 ADP MORB X FJX 0F HYD CYL X0 FGS #ACY0 0 CROSS MJ x MJ x MJ x MJ SEAL KIT IN (FGS-SK-ACBXQQ) TEE MJ x MJ x MORB F HYD CYL X0 FGS #ACY0 ELB MJ X FJX 0 SEAL KIT IN (FGS-SK-ACBSQS) HYD HOSE / x FF 0 HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF QX /XL & SECTION PARTS MANUAL /

59 MF w/ INNER WING & OUTER WING SECTION QX WING FOLD HYDRAULICS SERIAL # SEE PAGES - FOR VALVE PLUMBING 0 00 QX /XL & SECTION PARTS MANUAL /

60 MF w/ INNER WING & OUTER WING SECTION QX WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 TEE MJ X MJ X FJX 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB ELB MJ X FJX HYD HOSE / x FF 0 HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF QX /XL & SECTION PARTS MANUAL / 0 0F HYD CYL X0 FGS #ACY0 SEAL KIT IN (FGS-SK-ACBXQQ) F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS)

61 MF w/ INNER WING & OUTER WING SECTION QX WING FOLD HYDRAULICS SERIAL # QX /XL & SECTION PARTS MANUAL /

62 MF w/ WING QX DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGE 00 QUICK DISCONT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x0 FF F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

63 MF w/ & WING QX DEPTH CONTROL HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 HYD HOSE / x0 FF 0 SEE PAGE ADD / x 0 () FF HYD HOSE FOR WINGS F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) 00 QX /XL & SECTION PARTS MANUAL /

64 FT MF w/ WING QX DEPTH CONTROL HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x0 FF 0 HYD HOSE / x0 FF 0 SEE PAGE F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) 00 QX /XL & SECTION PARTS MANUAL /

65 MF W/ WING QX WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT CPLR ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ TEE MJ x MJ x MORB ELB MJ X FJX HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 0 HYD HOSE / x0 FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL /

66 MF w/ & WINGS QX WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL /

67 SEE PAGE ( & ) ( ) MF w/ INNER WING & OUTER WINGS QX WING FOLD HYDRAULICS SERIAL # ( & ) ( ) QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX ELB MJ X MORB 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF HYD HOSE / x0 FF HYD HOSE / x0 FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) 0 F HYD CYL X0 FGS#ACY SEAL KIT IN (FGS-SK-ACBZQS) QX /XL & SECTION PARTS MANUAL /

68 SEE PAGE ( & ) ( ) MF w/ INNER WING & OUTER WINGS QX WING FOLD HYDRAULICS SERIAL # ( & ) ( ) QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX ELB MJ X MORB 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF 0 HYD HOSE / x0 FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) F HYD CYL X0 FGS#ACY SEAL KIT IN (FGS-SK-ACBZQS) QX /XL & SECTION PARTS MANUAL /

69 MF w/ WINGS QX WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL /

70 SEE PAGE ( & ) ( ) 0 MF w/ INNER WING & OUTER WINGS QX WING FOLD HYDRAULICS SERIAL # QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX ELB MJ X MORB 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) 0 F HYD CYL X0 FGS#ACY SEAL KIT IN (FGS-SK-ACBZQS) ( & ) ( ) QX /XL & SECTION PARTS MANUAL / 0

71 MF W/ WING XL DEPTH CONTROL HYDRAULICS SEE PAGE 00 QUICK DISCNCT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x FF 0 HYD HOSE / x FF F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK- ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

72 MF w/ WING XL DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGE 00 QUICK DISCNCT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 F HYD CYL X. BP FGSACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) QX /XL & SECTION PARTS MANUAL /

73 MF w/ WING XL DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGE 00 QUICK DISCNCT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 F HYD CYL X. BP FGSACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) /x FF HOSE QX /XL & SECTION PARTS MANUAL /

74 MF w/ & WING XL DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGE ADD / x 0 () MF HYD HOSE FOR WINGS 00 QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 00 HYD HOSE / x FF HYD HOSE / x FF 0 F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) 0 00 QX /XL & SECTION PARTS MANUAL /

75 MF W/ WING XL DEPTH CONTROL HYDRAULICS SERIAL # SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ X MJ X MJ 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 00 HYD HOSE / x FF 00 HYD HOSE / x00 FF 0 F HYD CYL X. BP FGS ACY 0 SEAL KIT BP (FGS SK-ACXLQS) F HYD CYL X0. BP FGA ACY 0 SEAL KIT BP (FGS SK-ACXLQS) 00 -/ CHANNEL LOCK 0 (NOT SHOWN) 0 CYLINDER PIN KIT(NOT SHOWN) 0 QX /XL & SECTION PARTS MANUAL /

76 MF w/ WING XL WING FOLD HYDRAULICS QUICK DISCNT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX 00 HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x FF 0 HYD HOSE / x FF F HYD CYL X FGS #ACY0 0 SEAL KIT (FGS-SK- ACBSQS) QX /XL & SECTION PARTS MANUAL /

77 MF w/ WING XL WING FOLD HYDRAULICS SERIAL # QUICK DISCNT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX 00 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF 0 HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL /

78 MF w/ WING XL WING FOLD HYDRAULICS SERIAL # QUICK DISCNT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX 00 ADP MORB X FJX 0 CROSS MJ HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL /

79 MF w/ INNER WING & OUTER WING XL WING FOLD HYDRAULICS SERIAL # SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX ELB MJ X MORB 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) F HYD CYL X0 FGS#ACY SEAL KIT IN (FGS-SK-ACBZQS) QX /XL & SECTION PARTS MANUAL /

80 MF w/ & WING XL WING FOLD HYDRAULICS SERIAL # QUICK DISCNT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX 00 ADP MORB X FJX 0 CROSS MJ HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL / 0

81 MF w/ INNER WING, & OUTER WING XL WING FOLD HYDRAULICS SERIAL # ( & ) ( ) SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX ELB MJ X MORB 0 HYD HOSE / x FF HYD HOSE / x FF ( & ) ( ) HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x0 FF HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) F HYD CYL X0 FGS#ACY SEAL KIT IN (FGS-SK-ACBZQS) QX /XL & SECTION PARTS MANUAL /

82 MF w/ INNER WING, & OUTER WING XL WING FOLD HYDRAULICS SERIAL # ( & ) ( ) ( & ) ( ) SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX ELB MJ X MORB 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF 0 HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) F HYD CYL X0 FGS#ACY SEAL KIT IN (FGS-SK-ACBZQS) QX /XL & SECTION PARTS MANUAL /

83 MF w/ WING XL WING FOLD HYDRAULICS 0 SERIAL # QUICK DISCNT COUPLER ADP MJ X MPT 0 ELB MJ X MORB TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX 00 ADP MORB X FJX 0 CROSS MJ HYD HOSE / x FF 0 HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) QX /XL & SECTION PARTS MANUAL /

84 MF w/ INNER WING, & OUTER WING XL WING FOLD HYDRAULICS SERIAL # ( & ) ( ) 0 ( & ) ( ) SEE PAGE QUICK DISCONNECT COUPLER ADP MJ X MPT 0 ELB MJ X MORB 00 ADP MORB X FJX 0 CROSS MJ x MJ x MJ x MJ TEE MJ x MJ x MORB TEE MJ x MJ x MJ ELB MJ X FJX ELB MJ X MORB 0 HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x0 FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF HYD HOSE / x FF F HYD CYL X0 FGS #ACY0 0 SEAL KIT IN (FGS-SK-ACBSQS) 0 F HYD CYL X0 FGS#ACY SEAL KIT IN (FGS-SK-ACBZQS) QX /XL & SECTION PARTS MANUAL /

85 XL DEPTH CONTROL HYDRAULICS SERIAL # 0 - UP 0 SEE PAGE QUICK COUPLER (FORB) 0 ADP MJ x MORB 0 /x FF HOSE /x0 FF HOSE 00 /x FF HOSE 0 ELB MORB x MJ F X 0. CYLINDER 0 SEAL KIT BP (FGS SK-ACXLQS) /x00 FF HOSE F X. CYLINDER 0 SEAL KIT BP (FGS SK-ACXLQS) 0 /xff HOSE 00 /x FF HOSE TEE MJ x MJ x MJ 0 /x0 FF HOSE QX /XL & SECTION PARTS MANUAL /

86 XL 0 DEPTH CONTROL HYDRAULICS SERIAL # 0 - UP 0 SEE PAGE QX /XL & SECTION PARTS MANUAL / QUICK COUPLER (FORB) 0 ADP MJ x MORB 0 /x FF HOSE /x0 FF HOSE /x FF HOSE 0 ELB MORB x MJ F X 0. CYLINDER 0 SEAL KIT BP (FGS SK-ACXLQS) /x00 FF HOSE F X. CYLINDER 0 SEAL KIT BP (FGS SK-ACXLQS) 0 /xff HOSE /x00 FF HOSE /x FF HOSE TEE MJ x MJ x MJ 0 /x0 FF HOSE