PARTS MANUAL DISC CULTIVATOR. WIL-RICH PO Box 1030 Wahpeton, ND PH (701) Fax (701) Serial # and up

Transcription

1 PARTS MANUAL Serial # 0 and up DISC CULTIVATOR Printed in USA () / WIL-RICH PO Box 00 Wahpeton, ND 0 PH (0) - Fax (0) -

2 WIL-RICH, LLC WARRANTY Wil-Rich s products are warranted to the original non-commercial purchaser to be free from defects in material and workmanship for a minimum period of twelve () months from the original date of purchase. Additional Field Cultivator Warranty: Wil-Rich warrants to the original purchaser of each new Wil-Rich Field Cultivator unit (Excel and QuadX), and Disk Field Cultivators that the product be free from defects in material and workmanship for the period of three () years on the main frames and shank assemblies. All other components are covered by the twelve () month warranty period. Commercial Use: Warranty for commercial, rental or custom use of any Wil-Rich product is limited to 0 days, parts and labor. We warrant products sold by us to be in accordance with our published specifications or those specifications agreed to by us in writing at time of sale. Our obligation and liability under this warranty is expressly limited to repairing, or replacing, at our option, within months after date of retail delivery, any product not meeting the specifications. We make no other warranty, express or implied and make no warranty of merchantability or of fitness for any particular purpose. If requested by us, products or parts for which a warranty claim is made are to be returned transportation prepaid to our factory. Any improper use, operation beyond rated capacity, substitution of parts not approved by us, or any alteration or repair by others in such manner as in our judgment affects the product materially and adversely shall void this warranty. No employee or representative is authorized to change this warranty in any way or grant any other warranty. Wil-Rich reserves the right to make improvement changes on any of our products without notice. When warranty limited or not applicable: Warranty on hydraulic hoses, hydraulic cylinders, hubs, spindles, engines, valves, pumps or other trade accessories are limited to the warranties made by the respective manufactures of these components. Rubber tires and tubes are warranted directly by the respective tire manufacturer only, and not by Wil-Rich. This warranty shall not be interpreted to render Wil-Rich liable for injury or damages of any kind or nature to person or property. This warranty does not include claims for, or extend to the loss or damage of crops, loss because of delay in seeding/planting or harvesting, or any expense or loss incurred for labor, substitute machinery, rental, and transportation expense or for any other reason. A Warranty Validation and Delivery Report Form must be filled out and received by Wil-Rich to initiate the warranty coverage. WARRANTY CLAIMS PROCEDURE. The warranty form must be returned to Wil-Rich within thirty (0) working days from the repair date.. Parts returned to Wil-Rich without authorization will be refused. The parts must be retained at the dealership for ninety (0) days after the claim has been filed. If the Service Department would like to inspect the parts, a packing slip will be mailed to the dealer. The packing slip must be returned with the parts. The parts must be returned prepaid within thirty (0) days of receiving authorization. After the parts are inspected and warranty is verified, credit for the return freight will be issued to the dealer.. Parts that will be scrapped at the dealership will be inspected by a Wil-Rich Sales Representative, District Sales Manager or Service Representative within the ninety (0) day retaining period. SOIL FINISHER PARTS MANUAL () /

3 PERSONAL SAFETY IS IMPORTANT! ALL PERSONNEL INVOLVED WITH THE ASSEMBLY AND/OR OPERATION OF THIS EQUIPMENT MUST BE INFORMED OF PROPER SAFETY PROCEDURES. OPERATOR S/ ASSEMBLY MANUALS PROVIDE THE NECESSARY INFORMATION. IF THE MANUAL IS LOST FOR A PARTICULAR IMPLEMENT, ORDER A REPLACEMENT AT ONCE. OPERATOR S AND ASSEMBLY MANUALS ARE AVAILABLE AT NO CHARGE UPON RE- QUEST. This Safety Alert symbol means ATTENTION! BE- COME ALERT YOUR SAFETY IS INVOLVED!! The Safety Alert symbol identifies important safety messages on the Wil-Rich Soil Finisher and in this manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety message. Why is SAFETY important to you? Big Reasons Accidents Disable and Kill Accidents Cost Accidents Can Be Avoided SIGNAL WORDS: DANGER WARNING CAUTION Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate signal word for each message has been selected using the following guidelines: An immediate and specific hazard which WILL result in severe personal injury or death if the proper precautions are not taken. A specific hazard or unsafe practice which COULD result in severe personal injury or death if the proper precautions are not taken Unsafe practices which COULD result in personal injury if proper practices are not taken, or as a reminder of good safety practices. ADDRESS INQUIRIES TO: WIL-RICH PO BOX 00 WAHPETON, ND 0 PH (0) - FAX (0) - SOIL FINISHER PARTS MANUAL () /

4 CONTENTS GENERAL INFORMATION... - FT MAIN FRAME... FT MAIN FRAME... FT MF HITCH POLES... FT MF HITCH POLES... FT MF PULL HITCH & LEVEL LIFT... FT MF PULL HITCH & LEVEL LIFT.. 0 LEVEL LIFT ASSY CONTINUED... UTILITY POLE... MAIN AXLE & WALKERS... 0FT WING ASSEMBLY... FT WING ASSEMBLY... FT WING AXLE ASSEMBLY... FT WING ASSY &FT... RIGID GAUGE WHEEL ASSEMBLY... FT OUTER WING ASSY &FT... FT WING REST... 0 &FT MF WING REST... WING LIFT COMP,,,&FT... WING LIFT COMPONENTS &FT.. CASTERING GAUGE WHEEL... DEPTH GAUGE MF & DISC GANG... SINGLE POINT DEPTH CTRL... - DISC GANG ASSEMBLY... - BEARING & SCRAPER ASSEMBLY... 0 &FT MAIN FRAME DISC GANG... FT WING DISC GANG & FT... FT WING DISC GANG & FT... 0FT WING DISC GANG,,, & FT... DISC GANG FT OTR WING &FT. HYDRAULIC CYLINDER - DISC LIFT... HOSE CLAMP ASSEMBLY... WING FOLD HYDRAULICS & FT. WING FOLD HYDRAULIC,,FT.. WING FOLD HYDRAULIC &FT... 0 WING FOLD HYDRAULIC &FT... DEPTH CONTROL HYD &FT... DEPTH CONTROL HYD &FT... DEPTH CONTROL HYD FT... DEPTH CNTRL HYD,,&FT... DISK LIFT HYDRAULICS &FT... DISK LIFT HYDRAULICS &FT... DISK LIFT HYDRAULICS FT... DISK LIFT HYDRAULICS &FT... DISK LIFT HYDRAULICS &FT... 0 TWIN SPRING SHANK ASSEMBLY... SOIL FINISHER PARTS MANUAL () / SINGLE SPRING SHANK ASSEMBLY.. -/", " & -/" HUB & SPINDLE... SHOVELS... REAR HITCH... LIGHTS... TIRES, RIMS, VALVE STEMS... DECALS... - Orientation Any reference to left (L) or right (R) sides or components is to be understood as being viewed from behind the implement and looking forward. Serial Number Break Every implement has a serial number located on the frame. These serial numbers are consecutively assigned to the implements as they are manufactured. To aid in part ordering, we reference to the serial number at the point the change occurred to provide an accurate means of determining the proper parts. Modifications It is the policy of WIL-RICH Operations to improve its products whenever possible and practical to do so. We reserve the right to make changes, improvements, and modifications at any time without incurring the obligation to make such changes, improvements and modifications on any equipment sold previously. Abbreviations ASSY... Assembly BLD... Blade BRKT... Bracket CTR... Center CP...Cup Point (FF)... Female Female GR... Grade of Bolt HD... Heavy Duty HDWE... Hardware LH... Left Hand (MF)... Male Female MF... Main Frame MTG... Mounting NC... National Course Thread NF... National Fine Thread NPT... National Pipe Thread RH... Right Hand SS... Screw Stop SST... Stainless Steel TA... Tandem TBP...Top Bypass W/... With W/O...Without

5 FT MAIN FRAME,,, & FT SEE PAGE FOR HUB & SPINDLE ASSEMBLY 0 SEE PAGE FOR WALKER ASSEMBLY 0 MAIN FRAME WELD FRONT-LH FT 0 MAIN FRAME WELD FRONT-RH FT 0 MAIN FRAME WELD REAR-RH FT 0 MAIN FRAME WELD REAR-LH FT 0 BLT HEX /-0NC X Z NUT LK /-NC Z BLT HEX /-NC X Z 0 BLT HEX /-0NC X Z INTERMEDIATE SUPPORT ARM 0 CLAMP PLATE-PAINTED BLT HEX /-0NC X -/ Z 0 FT MAIN AXLE ASSEMBLY AXLE CLAMP 0 -/" SHANK STUB ("MTG) BOLT PLATE.X. ("MTG) NUT LK /-NC Z 0 BLT HEX /-NCX-/ Z BAR-CYL MOUNT FT WING FOLD 0 BAR CYL MNT-WING FOLD ' MF 0 0 BLT HEX /-0NC X -/ Z NUT LK /-0NC Z 00 -/ IN CHNL LOCK 0 IN. MAST ANCHOR MAIN (. IN ) BLT HEX /-0NC X -/ Z F HYD CYL X. TBP ILP FGS #ACY WSHR FLAT (-/ X -/ACT) Z 0 HEADLESS PIN() X. PIN ROLL / X -/ Z SHANK STUB WELD -/ IN 0 HUB & SPINDLE ASSY INCH SOIL FINISHER PARTS MANUAL () /

6 FT MAIN FRAME,,, & FT SEE PAGE FOR HUB & SPINDLE ASSEMBLY SEE PAGE FOR WALKER ASSEMBLY MAIN FRAME WELD FRONT-LH FT 00 MAIN FRAME WELD FRONT-RH FT 0 MAIN FRAME WELD REAR-RH FT MAIN FRAME WELD REAR-LH FT INTERMEDIATE SUPPORT ARM AXLE CLAMP NUT LK /-0NC Z BLT HEX /-0NC X Z MAIN AXLE ASSY -/ SPDL 0 F CYL,HYD X0 FGS #ACY0 HEADLESS PIN (H) () X-/ ZP PIN ROLL / X -/ Z BAR-CYL MNT-WING FOLD ' MF BOLT, WHEEL /NF X -/ F HYD CYL X. TBP ILP FGS #ACY. MAST ANCHOR MAIN (. IN ) 0 BSHG MCHRY -/ X -/ X GA Z 0 HEADLESS PIN() -/X. PIN ROLL / X -/ Z 0 TUBE WELD-MAIN MAST -/ HUB & SPINDLE ASSY HEADLESS PIN() X.00 WSHR FLAT (-/ X -/ACT) Z HEADLESS PIN (H) () X-/ ZP RAIL SUPPORT - MF PLATE-RAIL CLAMP BLT HEX /-0NC X Z SOIL FINISHER PARTS MANUAL () /

7 FT PIVOT HITCH 0 MAIN POLE WELD-LH 0 MAIN POLE WELD-RH CROSS TUBE WELD-POLE CONNECTION TUBE WELD-FRONT SUPPORT 0 CLAMP PLATE-PAINTED X CLAMP PLATE-PAINTED BRACKET WELD-CENTER LIFT 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /NC 0 0 BLT HEX /-0NCX-/ Z 0 BLT HEX /-0NCX-/ Z BLT HEX -NCX Z WSHR HLK IDZ NUT HEX -NC BLT HEX /-0NCX-/ Z SOIL FINISHER PARTS MANUAL () /

8 FT PIVOT HITCH 0 MAIN POLE WELD-LH 0 MAIN POLE WELD-RH CROSS TUBE WELD-POLE CONN FT MF TUBE WELD-FRONT SUPPORT 0 CLAMP PLATE-PAINTED X CLAMP PLATE-PAINTED BRACKET WELD-CENTER LIFT 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /NC 0 0 BLT HEX /-0NCX-/ Z 0 BLT HEX /-0NCX-/ Z BLT HEX -NCX Z WSHR HLK IDZ NUT HEX -NC BLT HEX /-0NCX-/ Z SOIL FINISHER PARTS MANUAL () /

9 FT MAIN HITCH & LEVEL LIFT ASSY HITCH WELD-FT MF 00 SCREW ADJUSTMENT WELD ADJUSTMENT ROD CENTER LIFT TUBE WELD-SHORT LINK ARM WELD-CENTER LIFT-FRONT CAST DUAL HITCH HITCH BOLT 0 NUT SLTD -/-NC Z PIN COT /DIAX Z 0 0 HEADLESS PIN() -/X. /X-/ ROLL PIN HEADLESS PIN() -/X-/ 0 PIN ROLL /DIAX-/ Z 00 HEADLESS PIN() -/X. -/X-/ DIA PIN-LEVEL LIFT BLT HEX /-NCX Z 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /-NC Z -/NC JAM NUT 0 SAFTEY CHAIN SIDE WIND JACK BLT-U /-NC X X -/ Z WSHR HLK /ID(/ACT) Z NUT HEX /-NC Z SOIL FINISHER PARTS MANUAL () /

10 FT MAIN HITCH & LEVEL LIFT ASSY HITCH WELD-FT MF 00 SCREW ADJUSTMENT WELD ADJUSTMENT ROD CENTER LIFT TUBE WELD-SHORT LINK ARM WELD-CENTER LIFT-FRONT CAST DUAL HITCH HITCH BOLT 0 NUT SLTD -/-NC Z PIN COT /DIAX Z 0 0 HEADLESS PIN() -/X. /X-/ ROLL PIN HEADLESS PIN() -/X-/ SOIL FINISHER PARTS MANUAL () / 0 0 PIN ROLL /DIAX-/ Z 00 HEADLESS PIN() -/X. -/X-/ DIA PIN-LEVEL LIFT BLT HEX /-NCX Z 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /-NC Z -/NC JAM NUT 0 SAFTEY CHAIN SIDE WIND JACK BLT-U /-NC X X -/ Z WSHR HLK /ID(/ACT) Z NUT HEX /-NC Z

11 LEVEL LIFT ASSY CONTINUED 0 00 CENTER LIFT TUBE WELD-SHORT 00 HEADLESS PIN() -/X. /X-/ ROLL PIN LINK ARM WLD-CTR LIFT-SHORT -/ X -/ DIA PIN - LEVEL LIFT 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /-NC Z BLT HEX /-NCX Z CENTER LIFT TUBE 0 0 HEADLESS PIN() -/X. SOIL FINISHER PARTS MANUAL () /

12 UTILITY POLE /NCX BOLT PLUG HOLDER MANUAL TUBE WITH BRACKET /NCX/ BOLT /" FLAT WASHER HYD HOSE BRACKET /" LOCK WASHER /NC HEX NUT 0 RUBBER EDGE 0 0 /NC HEX NUT /" LOCK WASHER /" FLAT WASHER 0 /NCXX U-BOLT BACKING PLATE SOIL FINISHER PARTS MANUAL () /

13 &FT MAIN FRAME & 0' WING TANDEM AXLE 0 0 FT MAIN FRAME AXLE(SHOWN) FT MAIN FRAME AXLE RH WALKER ASSY "(SHOWN) LH WALKER ASSY "(SHOWN) LH WALKER ASSY -/" RH WALKER ASSY -/". MAST ANCHOR(.) BLT HEX /-0NCX-/ Z 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /-0NC Z 0 HEADLESS PIN() X. WSHR FLAT (-/X-/ACT)Z 0 /X-/ ROLL PIN F HYD CYL X.BP FGS #ACY HEADLESS PIN (H) () X-/ WING AXLE WELD-LH (SHOWN) WING AXLE WELD-RH 0. MAST ANCHOR(.0) F HYD CYL X0.BP FGS #ACY 0. BORE BRG CONE (0) BEARING BUSHING 0.ID X.0 OD TRIPLE LIP SEAL /NFX-/ GR BOLT BLT HEX /-NC X Z 0 0 /NF LOCK NUT " HUB & SPINDLE -/" HUB & SPINDLE BLT WHL /-0NFX (/ HEAD) 0 /NF GREASE FITTING SEE PAGE FOR TIRE AND RIM OPTIONS SEE PAGE FOR HUB & SPINDLE ASSEMBLY WING WALKER ASSY SAME AS MAIN AXLE TANDEM PIN 0 -/NF HYDRA LOCK NUT 00 -/" CHNL LOCK 0" (BLK) 0 /X-/ LYNCH PIN SOIL FINISHER PARTS MANUAL () /

14 0FT WING ASSEMBLY WING FRAME-LH FRONT 0FT(SHOWN) WING FRAME-RH FRONT 0FT WING FRAME-LH REAR 0FT(SHOWN) WING FRAME-RH REAR 0FT 0 TUBE WELD-GANG WHEEL 0 GAUGE TUBE ADJUSTABLE BRACKET GAUGE WHEEL ARM-LH(SHOWN) 0 GAUGE WHEEL ARM-RH 00 WING MAST 0 HEADLESS PIN () -/X-/ ADJUSTER ROD (.) 0 ADJUSTMENT ROD ASSEMBLY 0 0 BLT HEX /-NCX-/ Z NUT HEX -NC Z 0 BLT HEX /-0NC X Z 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /NC BLT HEX -NCX Z NUT JAM -/-NC Z BLT-U /-NC X X -/ Z WSHR HLK /ID(/ACT) Z NUT HEX /-NC 0 /X-/ ROLL PIN 0 BSHG MCHRY -/X-/XGA P 0 NUT NYLON LOCK -NC Z SOIL FINISHER PARTS MANUAL () /

15 FT WING ASSEMBLY WING FRAME-LH FRONT FT(SHOWN) 0 WING FRAME-RH FRONT FT 0 WING FRAME-LH REAR FT(SHOWN) 0 WING FRAME-RH REAR FT TUBE WELD-GANG WHEEL 0 GAUGE TUBE ADJUSTABLE BRACKET GAUGE WHEEL ARM-LH(SHOWN) 0 GAUGE WHEEL ARM-RH 00 WING MAST 0 HEADLESS PIN () -/X-/ ADJUSTER ROD (.) 0 ADJUSTMENT ROD ASSEMBLY 0 0 BLT HEX /-NCX-/ Z NUT HEX -NC Z 0 BLT HEX /-0NC X Z NUT HEX /NC BLT HEX -NCX Z NUT JAM -/-NC Z BLT-U /-NC X X -/ Z WSHR HLK /ID(/ACT) Z NUT HEX /-NC /X-/ ROLL PIN 0 0 BSHG MCHRY -/X-/XGA P 0 NUT NYLON LOCK -NC Z SOIL FINISHER PARTS MANUAL () /

16 FT WING AXLE ASSEMBLY 0 WING AXLE FT LH(SHOWN) WING AXLE FT RH 0. MAST ANCHOR(.0) BLT HEX /-0NCX-/ Z 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /-0NC Z F HYD CYL X0.BP FGS #ACY 0 HEADLESS PIN() X. WSHR FLAT (-/X-/ACT)Z /X-/ ROLL PIN 0 HEADLESS PIN (H) () X-/ /NFX-/ GR BOLT 0 /NF LOCK NUT " HUB & SPINDLE WHL ASSY LX B " PGRAY /NFX (/ HEAD) SEE PAGE FOR TIRE AND RIM OPTIONS SEE PAGE FOR HUB & SPINDLE ASSEMBLY SOIL FINISHER PARTS MANUAL () /

17 FT WING ASSEMBLY & FT 0 00 SEE PAGE FOR RIGID GAUGE WHEEL ASSEMBLY 0 WING FRAME-LH FRONT FT(SHOWN) 0 WING FRAME-RH FRONT FT 0 WING FRAME-LH REAR FT(SHOWN) 0 WING FRAME-RH REAR FT F CYL HYD X0 FGS #ACY BLT HEX -NCX Z 0 NUT NYLON LOCK -NC Z 0 BLT-U /-NCXX-/ Z HEADLESS PIN (H) () X-/ WSHR FLAT (-/X-/ACT)Z /X-/ ROLL PIN 0 BLT HEX -NCX Z SHIM 0 BLT HEX /-NCX Z 0 LINKAGE ARM PLATE (-HOLE) WING HINGE WELD-LH REAR (SHOWN) WING HINGE WELD-RH REAR WING HINGE WELD-FRONT LH (SHOWN) WING HINGE WELD-FRONT RH SOIL FINISHER PARTS MANUAL () /

18 FT WING RIGID GAUGE WHEEL 0 TOP ADJUSTMENT ASSY GAUGE WHEEL LEG -/ HUB&SPNDL(LG0000) /NFx-/ GR BOLT 0 NUT POSLK /NF 0 WHL ASSY L x B " P GRAY /NFx (/ HEAD) BLT-U /-NCX-/X-/ WSHR HLK /ID(/ACT)Z 0 NUT HEX /-NC Z BACK PLATE-GAUGE WHEEL BLT HEX /-NCX Z SEE PAGE FOR TIRE AND RIM OPTIONS SEE PAGE FOR HUB & SPINDLE ASSEMBLY SOIL FINISHER PARTS MANUAL () /

19 0 FT OUTER WING & FT 00 0 OUTER WING FRAME-LH FT(SHOWN) OUTER WING FRAME-RH FT F CYL HYD X0 FGS #ACY BLT HEX -NCX Z 0 NUT NYLON LOCK -NC Z 0 BLT-U /-NCXX-/ Z WSHR HLK /ID(/ACT)Z NUT HEX /-NC HEADLESS PIN (H) () X-/ WSHR FLAT (-/X-/ACT)Z 0 /X-/ ROLL PIN BLT HEX -NCX Z SHIM 0 BLT HEX /-NCX Z 0 LINKAGE ARM PLATE (-HOLE) WING HINGE WELD-LH REAR (SHOWN) WING HINGE WELD-RH REAR 0 WING HINGE WELD-FRONT LH (SHOWN) WING HINGE WELD-FRONT RH BACK PLATE-FRONT HINGE MNT BLT HEX /-NC X -/ Z 0 BLT-U /-NC X X -/ Z SOIL FINISHER PARTS MANUAL () /

20 ' WING REST WING REST WELD-FT BLT-U /-NCX-/X-/ Z 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /-NC Z WING REST FT OUTER WING." 00 WING REST WELD-FT 0 BLT-U /-NCXX-/ Z WSHR HLK /ID(/ACT)Z NUT HEX /-NC Z SOIL FINISHER PARTS MANUAL () / 0

21 WING REST &FT MAIN FRAME 0 FT WING REST WELD-REAR FT WING REST WELD-REAR FT WING REST WELD-FRONT FT WING REST WELD-FRONT 0 BLT-U /-NCXX-/ Z WSHR HLK /ID(/ACT)Z NUT HEX /-NC SOIL FINISHER PARTS MANUAL () /

22 WING LIFT COMPONENTS,,, &FT LIFT LINK ARM-SHORT FLAT WASHER 0 NC NYLON TOPLOCK NUT NCX GR BOLT WING LIFT LINK WING LIFT BUSHING (.0IDX-/ODX.0) NCX-/ GR BOLT 0 NCX-/ GR BOLT /NCX-/ GR BOLT 0 0 WING LINK STRAP WSHR HLK /ID(/ACT)Z NUT HEX /-NC Z F CYL,HYD X0 FGS #ACY0 SOIL FINISHER PARTS MANUAL () /

23 WING LIFT COMPONENTS & FT 0 00 LIFT LINK ARM FLAT WASHER 0 NC NYLON TOPLOCK NUT NCX GR BOLT WING LIFT LINK WING LIFT BUSHING (.0IDX-/ODX.0) NCX-/ GR BOLT 0 NCX-/ GR BOLT /NCX-/ GR BOLT 0 0 WING LINK STRAP WSHR HLK /ID(/ACT)Z NUT HEX /-NC Z 0F HYD CYL X0 FGS #ACY0 SOIL FINISHER PARTS MANUAL () /

24 ' & 0' WING CASTERING GAUGE WHEEL GAUGE WHEEL ARM WELD-LH (SHOWN) 0 GAUGE WHEEL ARM WELD-RH 00 QUADX LOWER GAUGE ARM 00 EXCEL UPPER GAUGE WHEEL ARM GAUGE WHEEL PIVOT BOLT (X.") WSHR FLAT (-/X-/ACT)Z 0 NUT NYLON LOCK -NC Z 00 CASTER WHEEL LEG (RED) LINK ARM STOP COLLAR (RED) SET SCREW (/-NC X /) 0 BREAK PLATE INNER BREAK PLATE -/ HUB&SPNDL(LG0000) BLT HEX /-NCX Z NUT POSLK /-NC Z WHL ASSY LX B " P GRAY /NFX (/ HEAD) BLT HEX /-NCX Z WSHR FLAT /(/ X ACT) Z 0 NUT HEX /-NC Z 0 00 GAUGE WHEEL PIVOT 0 BLT HEX /-NC X -/ Z SPRING-CASTER WHL BRAKE(PAINTED) BLT HEX /-NC X -/ Z SOIL FINISHER PARTS MANUAL () / SEE PAGE FOR TIRE AND RIM OPTIONS SEE PAGE FOR HUB & SPINDLE ASSEMBLY

25 MAIN FRAME DEPTH GAUGE 0 PLATE-DEPTH GAUGE 0 DEPTH INDICATOR ARM -/ EXHAUST CLAMP BLT HEX /-NCX/ Z NUT POSLK /-NC P 0 BLT-U /-NCXX Z WSHR HLK /ID Z 0 NUT HEX /-NC Z 0 ANGLE DISC GANG DEPTH GAUGE PLATE-DEPTH GAUGE-DISK GANG 0 INDICATOR ARM-DISK GANG ANGLE DEPTH GAUGE 00 BLT-U /-NCXX Z WSHR HLK /ID Z 0 NUT HEX /-NC Z BLT-U /-NCXX-/ Z BLT HEX /-NCX/ Z NUT POSLK /-NC P SOIL FINISHER PARTS MANUAL () /

26 SINGLE POINT DEPTH CONTROL SERIAL NUMBERS & UP 0 TO BUTT END OF MAIN LIFT CYLINDER 0 FROM TRACTOR SOIL FINISHER PARTS MANUAL () /

27 SINGLE POINT DEPTH CONTROL BLT HEX /NCX -/ Z NUT POSLK / -NC Z SINGLE POINT TUBE -SHORT 0 BLT /-NCX Z NUT POSLK /-NC Z BENT TUBE WLED - SINGLE POINT 0 BLT HEX /NCX Z WSHR HLK /ID(/ACT) Z NUT HEX /-0NC Z 0 INNER TUBE - SINGLE POINT VALVE SPACER (ZINC) BLT HEX /-NCX-/ Z SLIDE ADJSUT NUT JAM /-NC Z PIN ROL /DIAX-/ Z ADJUST CRANK 0 ADJUST EAR 0 PIN ROLL /X-/ Z 0 SPRING PIN (ZINC) 0 BLT HEX /-NCX-/ Z SINGLE POINT BRACKET 0 NUT POSLK /-NC P MORB HEX HEAD PLUG 0 ELB MORB X MJ SPACER TUBE (ZINC) DCV VALVE (ORB) DCV VALVE REPAIR CARTRIDGE SOIL FINISHER PARTS MANUAL () /

28 DISC GANG ASSEMBLY SEE PAGE 0 FOR BEARING ASSEMBLY 0 SEE PAGE 0 SEE PAGE 0 0 SOIL FINISHER PARTS MANUAL () /

29 DISC GANG ASSEMBLY () BLADE LH WING DISC GANG ASSEMBLY (SHOWN) () BLADE RH WING DISC GANG ASSEMBLY 0 GANG BEAM-" & BLADE GANG ASSEMBLY GANG BEAM-.0" BLADE GANG ASSEMBLY GANG BEAM-", 0, & BLADE GANG ASSEMBLY GANG BEAM-" BLADE GANG ASSEMBLY GANG BEAM-" BLADE GANG ASSEMBLY 0 SPRING SHANK PLATE STANDARD BEARING ASSEMBLY LH (SHOWN) STANDARD BEARING ASSEMBLY RH SPRING SHANK PLATE BLT-U /-NCXX-/ WSHR HLK /ID(/ACT)Z NUT HEX /-NC Z. SQ GANG SHAFT.0" BLADE GANG ASSEMBLY. SQ GANG SHAFT." BLADE GANG ASSEMBLY 0. SQ GANG SHAFT." BLADE GANG ASSEMBLY. SQ GANG SHAFT." BLADE GANG ASSEMBLY. SQ GANG SHAFT.0" BLADE GANG ASSEMBLY. SQ GANG SHAFT 0." 0 BLADE GANG ASSEMBLY. SQ GANG SHAFT." BLADE GANG ASSEMBLY CSTG BGR SHORT.0 S. PT 0 0IN DIA DISK BLADE-LOW CONCAVITY IN GANG SPOOL CASTING SQ HOLE 0 " DIA SPRING WASHER 0 WSHR FLAT -/SAE(-/X)Z 0 -/" GANG WASHER NUT HVY HEX SLTD. -/"-ZP 0 PIN ROLL /DIAX-/Z 0 BRNG END CAP.-. WD SCTG BRG LONG.0 S.0 PT BLT HEX /-0NCX Z 0 0 WSHR HLK /ID(/ACT)Z 0 NUT HEX /-0NC Z 0 " SCRAPER BAR BLADE GANG ASSEMBLY " SCRAPER BAR BLADE GANG ASSEMBLY 0" SCRAPER BAR BLADE GANG ASSEMBLY.0" SCRAPER BAR BLADE GANG ASSEMBLY.0" SCRAPER BAR BLADE GANG ASSEMBLY 0" SCRAPER BAR 0 BLADE GANG ASSEMBLY " SCRAPER BAR BLADE GANG ASSEMBLY BLT-U /-NCX-/X-/ BLT-U /-NCX/X-/ 0 CLIP SCRAPER ARM (BLACK) NUT NLK /-NC Z += BLADE GANG ASSEMBLY += BLADE GANG ASSEMBLY += BLADE GANG ASSEMBLY += BLADE GANG ASSEMBLY SOIL FINISHER PARTS MANUAL () /

30 BEARING ASSEMBLY SPRING SHANK SCRAPER MOUNT-LH (SHOWN) SCRAPER MOUNT-RH BEARING CLAMP CLIP BEARING CLAMP BEARING CASTING BEARING -/SQX.OD 00 BEARING WASHER 0 BEARING RETAINING RING FTG GRS /NPT 0-BL(/") 0 BEARING ASSY (INCLUDES ITEMS THROUGH ) DISC SCRAPER ASSEMBLY SCRAPER BLADE ASSY LH (SHOWN) SCRAPER BLADE ASSY RH SCRAPER ARM SCRAPER BLADE-0IN LOW CON BLT CRG /-NCX-/ Z NUT NLK /-NC Z SOIL FINISHER PARTS MANUAL () / 0 SCRAPER BLADE ASSY LH OFFSET (SHOWN) SCRAPER BLADE ASSY RH OFFSET SCRAPER ARM SCRAPER BLADE-0IN LOW CON BLT CRG /-NCX-/ Z NUT NLK /-NC Z

31 &FT MAIN FRAME DISC GANG 00 0 DISC AXLE-LH FT MAIN FRAME (SHOWN) DISC AXLE-RH FT MAIN FRAME (SHOWN) DISC AXLE-LH FT MAIN FRAME DISC AXLE-RH FT MAIN FRAME 0 BLADE LH MF DISC GANG ASSY (SHOWN) BLADE RH MF DISC GANG ASSY (SHOWN) 0 BLADE LH MF DISC GANG ASSY 0 BLADE RH MF DISC GANG ASSY AXLE CLAMP ASSEMBLY 0 BLT HEX /-0NCX Z 0 PLATE-GANG BEAM MOUNT 0 BLT HEX /NCX Z NUT POSLK /-NC Z SOIL FINISHER PARTS MANUAL () /

32 FT WING DISC GANG & FT 00 0 DISC AXLE FT WING (FT MODEL) (SHOWN) DISC AXLE-LH FT WING (FT MODEL) DISC AXLE-RH FT WING (FT MODEL) BLADE LH WING DISC GANG ASSY (SHOWN) BLADE RH WING DISC GANG ASSY BLADE LH WING DISC GANG ASSY BLADE RH WING DISC GANG ASSY AXLE CLAMP ASSEMBLY 0 BLT HEX /-0NCX Z 0 PLATE-GANG BEAM MOUNT 0 BLT HEX /NCX Z NUT POSLK /-NC Z SOIL FINISHER PARTS MANUAL () /

33 FT WING DISC GANG & FT DISC AXLE-LH FT WING (&FT MODEL)(SHOWN) DISC AXLE-RH FT WING (&FT MODEL) BLADE LH WING DISC GANG ASSY (SHOWN) BLADE RH WING DISC GANG ASSY BLADE LH WING DISC GANG ASSY BLADE RH WING DISC GANG ASSY AXLE CLAMP ASSEMBLY 0 BLT HEX /-0NCX Z 0 PLATE-GANG BEAM MOUNT 0 BLT HEX /NCX Z NUT POSLK /-NC Z SOIL FINISHER PARTS MANUAL () /

34 0FT WING DISC GANG,,, & FT 00 DISC AXLE-LH 0FT WING (,,,, &FT MODEL)(SHOWN) DISC AXLE-RH 0FT WING (,,, &FT MODEL) 0 BLADE LH WING DISC GANG ASSY (SHOWN) BLADE RH WING DISC GANG ASSY 0 BLADE LH WING DISC GANG ASSY BLADE RH WING DISC GANG ASSY AXLE CLAMP ASSEMBLY 0 BLT HEX /-0NCX Z 0 PLATE-GANG BEAM MOUNT 0 BLT HEX /NCX Z NUT POSLK /-NC Z SOIL FINISHER PARTS MANUAL () /

35 DISC GANG FT OUTER WING & FT 00 DISC AXLE-LH FT OUTER WING (, &FT MODEL)(SHOWN) DISC AXLE-RH FT OUTER WING ( &FT MODEL) BLADE LH WING DISC GANG ASSY (SHOWN) BLADE RH WING DISC GANG ASSY BLADE LH WING DISC GANG ASSY BLADE RH WING DISC GANG ASSY AXLE CLAMP ASSEMBLY 0 BLT HEX /-0NCX Z 0 PLATE-GANG BEAM MOUNT 0 BLT HEX /NCX Z NUT POSLK /-NC Z SOIL FINISHER PARTS MANUAL () /

36 SEQUENCE HYDRAULIC CYLINDERS DISC LIFT HYD CYL x SEQ W/PINS HYD CYL -/x SEQ W/PINS HDY CYL -/x SEQ W/PINS HYD CYL -/x SEQ W/PINS HDY CYL x SEQ W/PINS HYD CYL -/x SEQ W/PINS HEADLESS PIN x-/ /"x-/" ROLL PIN SEAL KITS 00 x SEQ SEAL KIT 0 -/x SEQ SEAL KIT 000 -/x SEQ SEAL KIT 00 -/x SEQ SEAL KIT 0 x SEQ SEAL KIT 0 -/x SEQ SEAL KIT SOIL FINISHER PARTS MANUAL () /

37 HOSE CLAMP ASSEMBLY /x-/ CRG BLT (SINGLE STACK) /x-/ CRG BLT (DOUBLE STACK) /x-/ CRG BLT (TRIPLE STACK) BASE PLATE 0 / NUT / LK WASHER TUBE CLAMP 00 SOIL FINISHER PARTS MANUAL () /

38 WING FOLD HYDRAULICS & FT 00 0 F CYL,HYD X0 FGS #ACY0 HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 ELB MORB X MJ TEE MJ X MJ X MJ TEE MJ X MJ X MORB ELB MJ X FJX 0 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

39 ', ' & ' WING FOLD HYDRAULICS 0 00 F CYL,HYD X0 FGS #ACY0 0 HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX 0 ELB MORB X MJ TEE MJ X MJ X MJ 0 TEE MJ X MJ X MORB ELB MJ X FJX 0 CROSS MJ X MJ X MJ X MJ 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

40 WING FOLD HYDRAULICS & FT 0 00 F CYL,HYD X0 FGS #ACY0 0 HSE KPSI /X0 FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ 0 TEE MJ X MJ X MJ TEE MJ X MJ X MORB ELB MJ X FJX 0 CROSS MJ X MJ X MJ X MJ 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () / 0

41 0 WING FOLD HYDRAULICS & FT 00 0 F CYL,HYD X0 FGS #ACY0 0 HSE KPSI /X0 FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX HSE KPSI /X FJX-FJX 0 0 HSE KPSI /X0 FJX-FJX 0F HYD CYL X0 FGS #ACY0 0 SEQUENCE VALVE 0 ELB MORB X MJ TEE MJ X MJ X MJ TEE MJ X MJ X MORB ELB MJ X FJX 0 CROSS MJ X MJ X MJ X MJ 00 ADP MORB X FJX 0 ADP MORB X MJ 0 QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

42 DEPTH CONTROL HYDRAULICS & FT F HYD CYL X. TBP ILP FGS #ACY HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 ELB MORB X MJ 0 TEE MJ X MJ X MJ MORB HEX HEAD PLUG DEPTH CONTROL VALVE (ORB) 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

43 DEPTH CONTROL HYDRAULICS & FT 0 00 F HYD CYL X. TBP ILP FGS #ACY F HYD CYL X0. TBP ILP FGS #ACY HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ TEE MJ X MJ X MJ MORB HEX HEAD PLUG DEPTH CONTROL VALVE (ORB) 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

44 DEPTH CONTROL HYDRAULICS FT 0 00 F HYD CYL X. TBP ILP FGS #ACY F HYD CYL X0. TBP ILP FGS #ACY HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ TEE MJ X MJ X MJ MORB HEX HEAD PLUG DEPTH CONTROL VALVE (ORB) 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

45 DEPTH CONTROL HYDRAULICS,, & FT 0 00 F HYD CYL X. TBP ILP FGS #ACY F HYD CYL X0. TBP ILP FGS #ACY HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX 0 ELB MORB X MJ TEE MJ X MJ X MJ MORB HEX HEAD PLUG DEPTH CONTROL VALVE (ORB) 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

46 & FT DISK LIFT HYDRAULICS HYD CYL X SEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR () HYD CYL -/XSEQ W/ADPTR.() 0 HSE KPSI /X0 FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ 0 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

47 & FT DISK LIFT HYDRAULICS HYD CYL X SEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR () HYD CYL -/XSEQ W/ADPTR.() 0 HSE KPSI /X0 FJX-FJX HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ 0 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

48 FT DISK LIFT HYDRAULICS HYD CYL X SEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR () HYD CYL -/XSEQ W/ADPTR.() 0 HSE KPSI /X0 FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ 0 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

49 & FT DISK LIFT HYDRAULICS HYD CYL X SEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR () HYD CYL -/XSEQ W/ADPTR.() HSE KPSI /X00 FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ 0 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () /

50 & FT DISK LIFT HYDRAULICS HYD CYL X SEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR.() HYD CYL -/XSEQ W/ADPTR () HYD CYL -/XSEQ W/ADPTR.() HYD CYL X SEQ (0) HYD CYL -/X SEQ (0) HSE KPSI /X0 FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X FJX-FJX 0 HSE KPSI /X0 FJX-FJX HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ UNION MJ X MJ 0 ADP MORB X MJ QUICK DISCONNECT COUPLER FORB SOIL FINISHER PARTS MANUAL () / 0

51 TWIN SPRING SHANK ASSEMBLY 0 TWIN SPRING SHANK ASSEMBLY (INCLUDES ITEMS,, -, -, -, ) 0 SHANK FRAME BRACKET (") 0 / NCX X-/ U-BOLT / NF LOCK NUT HD EDGE FORM SHANK 0 TWIN SPRING HOLDER / NC LOCK NUT / LOCK WASHER / NC NUT SPRING HANDLE (PLAIN) 0 0 SPRING / NCX-/ GR BOLT / NCX-/ GR BOLT SPRING PLUG (PLAIN) 0 SHANK HEX BOLT 0 SPRING PLUG ASSEMBLY / X FULL THREAD CAP SCREW SOIL FINISHER PARTS MANUAL () /

52 SINGLE SPRING SHANK ASSEMBLY 0 FC SHANK ASSEMBLY (") (INCLUDES ITEMS,,-, -, -) 0 SHANK FRAME BRACKET (") 0 / NCX X-/ U-BOLT / NF LOCK NUT 0 EDGE FORMED SHANK SHANK HOLDER / NC LOCK NUT / LOCK WASHER / NC NUT SPRING HANDLE (PLAIN) 0 0 SPRING 0 / NCX GR BOLT / NCX-/ GR BOLT SPRING PLUG (PLAIN) / NCX GR TAP BOLT CARRIAGE BOLT 0 SPRING PLUG ASSEMBLY (INCLUDES -0 & )) SOIL FINISHER PARTS MANUAL () /

53 -/", " & -/" HUB & SPINDLE 0 ITEM PART NO DESCRIPTION -/" HUB & SPINDLE (INCLUDES ITEMS - & -) " HUB & SPINDLE (INCLUDES ITEMS - & -) -/" HUB & SPINDLE (INCLUDES ITEMS - & -) 0 / x-/ COTTER PIN / x COTTER PIN (-/") 0 / SPINDLE WASHER 00 HARD WR -/ ODx-/ ID(-/") 0 OUTER BEARING CONE 0 OUTER BEARING CONE (-/") 0 OUTER BEARING CUP 0 OUTER BEARING CUP (-/") 0 -BOLT HUB SPINDLE (INCLUDES ITEMS, &) 00 BOLT HUB -/" SPINDLE (INCLUDES ITEMS,, & ) 0 BOLT HUB -/" SPINDLE (INCLUDES ITEMS,, & ) / NPT GREASE FITTING / GREASE FITTING (-/") " TRIPLE LIP SEAL -/" TRIPLE LIP SEAL INCLUDES & -/ SPINDLE SEAL ITEM PART NO DESCRIPTION -/" SPINDLE (-/ LONG) " AXLE SPINDLE ( LONG) -/" AXLE SPINDLE (-/ LONG) / NCx GR BOLT (-/") / NFx-/ GR BOLT (") / NFx GR BOLT (-/") 0 0 / NF LOCK NUT / NC LOCK NUT 0 INNER BEARING CONE (-/") INNER BEARING CONE (") INNER BEARING CONE (-/") 0 INNER BEARING CUP (-/") INNER BEARING CUP (") INNER BEARING CUP (-/") / NFx 0 WHEEL BOLT / NFx-/ WHL BOLT (-/") 0 / NF SLOTTED NUT NF SLOTTED NUT (-/") DUST CAP 0 HUB CAP (-/ ) WEAR SLEEVE (-/") SOIL FINISHER PARTS MANUAL () /

54 SHOVELS A B ITEM PART NO DESCRIPTION FC SHOVEL EXTENSION KIT (REF. ITEMS,,,, & KIT CONTAINS HDWE FOR SHOVELS) A PLOW BOLT /NCX-/ GR B PLOW BOLT /NCX-/ GR PLOW BOLT /NCX-/ GR ITEM PART NO DESCRIPTION " TERMINATOR SWEEP STEM ANGLE W/HDWR /NCX-/ BOLT FC SHOVEL EXTENSION / FLAT WASHER /NC NUT SOIL FINISHER PARTS MANUAL () /

55 HD AUXILIARY HITCH 0 RIGID HINGED REAR HITCH W/HINGED TOUNGE (INCLUDES ITEMS,,-) REAR HITCH W/RIGID TOUNGE (INCLUDES ITEMS,,,0 & ) HD IMPLEMENT HITCH /NCXX-/U-BOLT RIGID TOUNGE MOUNT PIN ASSEMBLY X-/ /NCx GR BOLT 0 SPRING 0 /X-/ COTTER PIN HINGED HITCH MOUNT HINGED TOUNGE ASSEMBLY 0 PLATE /NCX GR BOLT CLAMP STRAP HD HITCH EXTENSION 0 /NCX GR BOLT (EXCEL) /NCXX-/U-BOLT (QUAD X) SOIL FINISHER PARTS MANUAL () /

56 LIGHTS 0 ITEM PART NO DESCRIPTION LIGHT KIT ( & ft) LIGHT KIT (,,,,,&ft) SQUARE TIE LOOP /NCxx-/ U-BOLT 0 SHORT BASE PIVOT 0 /NCx/ SQ HEAD SET SCREW 0 /NC NUT AMBER REFLECTOR LIGHT/REFLECTOR BRACKET 0 /NCx BOLT AMBER LIGHT RED LIGHT 0 RED REFLECTOR SOIL FINISHER PARTS MANUAL () / ITEM PART NO DESCRIPTION RED/ORANGE FLUORESCENT DECAL 0 x LIGHT ARM 0x. LIGHT ARM 0 " OFFSET LIGHT ARM 0 AG LIGHT KIT AG MODULE WISHBONE LEAD HARNESS 0 PIVOT PLATE /NCx-/x-/ U-BLT

57 TIRE ASSEMBLIES, RIMS, TIRES, VALVE STEMS IDENTIFY WHICH TIRE ASSEMBLY YOU REQUIRE, MOST WIL-RICH IMPLEMENTS HAVE MULTIPLE TIRE/RIM OPTIONS. ASSEMBLY DESCRIPTION 0 WHL ASSY.LX B " PLY 0 RIM X B (WV PO) TIRE LX PLY 0 VALVE STEM ASSY TR WHL ASSY LX B " P GRAY 0 RIM X B (WV PO) 0 TIRE L X PLY 0 VALVE STEM ASSY TR WHL ASSY LX B 0" PGRAY TIRE L X PLY RIM X0 B (W0VP0) 0 VALVE ASSEMBLY (STEEL) 0 WHL ASSY X. B 0" P GRAY 0 X.0- PLY TIRE RIM X0 B (W0VP0) 0 VALVE ASSEMBLY (STEEL) WHL ASSY.0-FI B 0IN F 0 X 0 RIM B - (W0V P0).0- FI F HWY IMP TIRE 0 VALVE ASSEMBLY (STEEL) SOIL FINISHER PARTS MANUAL () /

58 0 DECALS TURN = ¼ INCH 0 MANUAL WIL-RICH DCIII DISC CULTIVATOR ITEM PART NO DESCRIPTION DECAL SPEED SIGN MILE/HR DEPTH ADJUSTMENT DECAL DECAL HIGH VOLTAGE DANGER DECAL TILLAGE PROMOTES A SAFER ENVIRONMENT FOR TOMORROW DECAL LOCKOUT WARNING 0 DECAL READ MANUAL WARNING AMBER REFLECTOR 0 SOIL FINISHER DECAL LARGE WIL-RICH DECAL -/X-/ 0 DECAL SAFETY SET SOIL FINISHER DECAL SMALL SOIL FINISHER PARTS MANUAL () / ITEM PART NO DESCRIPTION 0 WIL-RICH DECAL X -/ SMV KT (-/ SQ - X - SQ TUBE) CLEARANCE LIGHT PACKAGE &FT CLEARANCE LT PKG,,,,,&FT 0 INTEGRAL RESTRICTOR DECAL DECAL FOLDING WINGS DANGER ASSEMBLY MANUAL -FT ASSEMBLY MANUAL -FT OPERATORS MANUAL

59 0 DECALS EXPORT TURN = ¼ INCH 0 ITEM PART NO DESCRIPTION DECAL SPEED SIGN 0 KM/HR DEPTH ADJUSTMENT DECAL DECAL HIGH VOLTAGE DECAL FASTEN SAFETY CHAIN DECAL FOLDING WINGS DECAL FLUID UNDER PRESSURE DECAL READ MANUAL AMBER REFLECTOR DECAL ENGINE OFF 0 DECAL UNHITCHING HAZARD 0 INTEGRAL RESTRICTOR DECAL ITEM PART NO DESCRIPTION DECAL LOCKOUT 0 WIL-RICH DECAL X -/ WIL-RICH DECAL -/X-/ DCIV DECAL KT EXPORT SMV KT (-/ SQ - X - SQ TUBE) CLEARANCE LIGHT PACKAGE &FT CLEARANCE LT PKG,,,,,&FT SOIL FINISHER PARTS MANUAL () /

60 SOIL FINISHER PARTS MANUAL () / 0