PM 1744 B49/B54/58T FM PARTS MANUAL

Transcription

1 PM 1744 B49/B54/58T FM PARTS MANUAL

2 1744 INDEX 1297 B49/54/58T FRONT MOUNT HEDGE/VERGE MOWER PAGE AND ILLUSTRATION NUMBERS SHOWN ARE USED ONLY FOR REFERENCE PURPOSES AND SHOULD NOT BE USED FOR ORDERING SPARE PARTS. PLEASE ENSURE THE CORRECT PART NUMBER AND DESCRIPTION IS GIVEN WHEN ORDERING SPARE PARTS. For machines with serial numbers commencing from: 2787H/97 Page No. Section 2-1 TO 2-2 MAINFRAME ASSEMBLY STABILISING WEIGHT ASSEMBLY STANDS ASSEMBLY 3-1 TO 3-2 KINGPOST ASSEMBLY 4-1 TO 4-2 DIN 3/VOLVO INTERFACE ASSEMBLIES AND TRANSPORT CRUTCH KIT 5-1 TO 5-3 FIRST & SECOND ARM ASSEMBLIES 6-1 TO 6-2 TURNTABLE/COWL LINKAGE 7-1 TO 7-2 PUMPS/GEARBOX ASSEMBLY 8-1 TO 8-2 HYDRAULIC POWER CIRCUIT (WITHOUT PUMPS) 9-1 TO 9-2 HYDRAULIC POWER CIRCUIT (WITH PUMPS) 10-1 TO 10-2 CONTROL VALVE MOUNTINGS 11-1 TO 11-2 EPP II VALVE ASSEMBLY 12-1 TO 12-2 EPP II REMOTE CONTROL ASSEMBLY 13-1 TO 13-2 EPP II RCA CAB SIDE MOUNTING 14-1 TO 14-2 FIRST, SECOND AND COWL RAM CIRCUITS 15-1 TO 15-2 SLEW RAM CIRCUIT 16-1 TO 16-2 ACCUMULATOR KIT 17-1 TO 17-2 DECALS IMPORTANT THIS MACHINE IS FOR VEGETATION CONTROL AND MUST NOT BE USED FOR ANY OTHER PURPOSE IT IS POTENTIALLY HAZARDOUS TO FIT OR USE ANY PARTS OTHER THAN GENUINE BOMFORD TURNER PARTS THE COMPANY DISCLAIMS ALL LIABILITY FOR THE CONSEQUENCES OF SUCH USE WHICH, IN ADDITION, VOIDS THE MACHINE WARRANTY 1 1

3 1744 MAINFRAME ASSEMBLY

4 1744 MAINFRAME ASSEMBLY 0997 REF PART NO DESCRIPTION QTY MAINFRAME ASSEMBLY MAINFRAME (WITH PUMPS) MAINFRAME (WITHOUT PUMPS) PLASTIC BUSH 170 X 150 X GASKET PIN - DIA 40 SPECIAL PIN DIA 25 - SPECIAL FLUID LEVEL GAUGE 1 * PLATE - FILLER/FILTER FLAT WASHER 8MM PLATED NUT M8 PLATED FILLER BREATHER CAP & STRAINER 1 * FILTER UCC REF SETSCREW M8 X 20MM PLATED SPRING WASHER 8MM PLATED ELEMENT UCC REF MFR BONDED SEAL 1.1/4"BSP ADAPTOR 1" X 1.1/4" BSP STABILISING WEIGHT ASSEMBLY CARRIER - BALLAST WEIGHT 1 * BALLAST WEIGHT SETSCREW M12 X 70MM PLATED 5 * PLATE - END CAP SETSCREW M12 X 45MM PLATED FLAT WASHER 12MM PLATED SPRING WASHER 12MM PLATED 2 * STUD - M16 X 2020 SPECIAL FLAT WASHER 16MM PLATED SPRING WASHER 16MM PLATED NUT M16 PLATED PLATE - END CAP STANDS ASSEMBLY BRACKET - STAND MOUNTING PLUG-PLASTIC 50 X 50: W 2 * JACK (SIDE WIND) UNIMOGS SETSCREW M12 X 40MM PLATED FLAT WASHER 12MM PLATED SELF-LOCKING NUT M12 PLATED BRACKET - STAND MOUNTING 1 * PIN 20 DIA X LINCH PIN STANDS FOR FRONT MOUNTS WITHOUT PUMPS STAND STAND 1 * PIN 20 DIA X LINCH PIN 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 2 2

5 1744 KINGPOST ASSEMBLY

6 1744 KINGPOST ASSEMBLY 0797 REF PART NO DESCRIPTION QTY KINGPOST ASSEMBLY KINGPOST 1 * PIN 50 DIA X SPRING WASHER 12MM PLATED NUT M12 PLATED BOLT M12 X 110MM PLATED 1 * PIN DIA 35 X SELF-LOCKING NUT M10 PLATED BOLT M10 X 65 PLATED 1 * PIN DIA 25 X 140 LONG SELF-LOCKING NUT M8 PLATED SOCKET CAPSCREW M8 X 50 PLATED CIRCLIP 150MM EXTERNAL THRUST WASHER 150 X 6 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 3 2

7 1744 VOLVO / DIN 3 INTERFACE ASSEMBLY AND TRANSPORT FRAME

8 1744 DIN 3/VOLVO INTERFACE ASSEMBLY 1297 REF PART NO DESCRIPTION QTY DIN 3 VOLVO INTERFACE ASSEMBLY * BRACKET-INTERFACE U140 DIN SETSCREW M20 X 50MM PLATED FLAT WASHER 1 BSF HEAVY FLAT WASHER 20MM PLATED SPRING WASHER 20MM PLATED SPRING WASHER 24MM PLATED SELF-LOCKING NUT M20 PLATED VOLVO BM INTERFACE ASSY * BRACKET - VOLVO BM INTERFACE SETSCREW M20 X 50MM PLATED FLAT WASHER 20MM PLATED SPRING WASHER 20MM PLATED SELF-LOCKING NUT M20 PLATED TRANSPORT CRUTCH KIT * FRAME - TRANSPORT CRUTCH SETSCREW M10 X 30MM PLATED SPRING WASHER 10MM PLATE NUT M10 PLATED 10 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 4 2

9 1744 FIRST AND SECOND ARM ASSEMBLIES

10 1744 FIRST ARM ASSEMBLY 0797 REF PART NO DESCRIPTION QTY ARM ASSEMBLY - 1ST * ARM - FIRST GREASE NIPPLE M10 90 DEG BUSH - PLASTIC 60 X 50 X 50 2 * PIN - DIA 35 X SELF-LOCKING NUT M10 PLATED BOLT M10 X 65 PLATED 1 * PIN - DIA 25 X SELF-LOCKING NUT M8 PLATED SOCKET CAPSCREW M8 X 50 PLATED 1 * PIN 40 DIA X 374MM SPECIAL SETSCREW M12 X SPRING WASHER 12MM PLATED NUT M10 PLATED BOLT M10 X 80MM PLATED GREASE NIPPLE M WASHER - M12 SPECIAL 2 * HOSE CLAMP-LOWER STUD - M10 X FLT WASHER 10MM PLATED FORM C SPRING WASHER 10MM PLATED NUT M10 PLATED HOSE GUARD - FIRST ARM 1 * CLAMP HOSE 14 X STUD - M10 X FLT WASHER 10MM PLATED FORM C SPRING WASHER 10MM PLATED NUT M10 PLATED 2 * BRACKET - HOSE MOUNTING SPRING WASHER 8MM PLATED SETSCREW M8 X 16MM PLATED HOSE CLAMP - UPPER CLAMP PLATE 48 X CLAMP PLATE 95 X SELF-LOCKING NUT M8 PLATED 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 5 2

11 1744 SECOND ARM ASSEMBLY 0797 REF PART NO DESCRIPTION QTY ARM ASSY - 2ND RH * ARM - SECOND R GREASE NIPPLE M10 90 DEG BUSH - PLASTIC 47 X 40 X 40 5 * PIN - DIA 25 X SELF-LOCKING NUT M8 PLATED SOCKET CAPSCREW M8 X 50 PLATED 1 * PIN - DIA 25 X SELF-LOCKING NUT M8 PLATED SOCKET CAPSCREW M8 X 50 PLATED 1 * STUD - M10 X FLAT WASHER 10MM PLATED FORM C SPRING WASHER 10MM PLATED NUT M10 PLATED HOSE GUARD - SECOND ARM 1 * PIN - DIA 30 X SELF-LOCKING NUT M8 PLATED SOCKET CAPSCREW M8 X 55 PLATED HOSE CLAMP-LOWER HOSE CLAMP - UPPER 2 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 5 3

12 1744 TURNTABLE AND COWL LINKAGE ASSEMBLY

13 1744 TURNTABLE/COWL LINKAGE 0797 REF PART NO DESCRIPTION QTY TURNTABLE / COWL LINKAGE * BRACKET - TURNTABLE / ARM GREASE NIPPLE M PIN,TURNTABLE LOCKING HM 'S' SPRING,COMPRESSION 2 1/2" LONG 1 * LEVER,LOCKING PIN RELEASE 'S' SETSCREW M6 X 40MM PLATED NUT NYLOC M6.Z/P. 1 * PIN DIA LONG SELF-LOCKING NUT M10 PLATED BOLT M10 X 80MM PLATED 1 * PIN DIA SELF-LOCKING NUT M10 PLATED BOLT M10 X 65 PLATED BRACKET - TURNTABLE/HEAD 1 * PLATE - COWL CLAMP SETSCREW M16 X 50MM PLATED SPRING WASHER 16MM PLATED NUT M16 PLATED 5 * TURNTABLE SWIVEL DISC SOCKET M/C SCREW M16 X 70 CSK GREASE NIPPLE M10 1 * BRACKET - COWL LINK PLASTIC BUSH - 42 X * PIN - DIA 25 X SELF-LOCKING NUT M8 PLATED SOCKET CAPSCREW M8 X 50 PLATED 1 * PIN - DIA 30 X SELF-LOCKING NUT M8 PLATED SOCKET CAPSCREW M8 X 55 PLATED 1 * LINK GREASE NIPPLE M GREASE NIPPLE M6 X 90DEG 1 * BRACKET-HOSE RH SPRING WASHER 16MM PLATED NUT M16 PLATED 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 6 2

14 1744 GEARBOX ASSEMBLIES

15 1744 PUMPS/GEARBOX ASSEMBLY 0797 REF PART NO DESCRIPTION QTY PUMPS / GEARBOX ASSEMBLY * PTO SHAFT ASSY 560 MM C/C COMPLETE SHIELD LAYSHAFT - * PTO PLASTIC CUP GUARD (REV DR) FLAT WASHER 8MM PLATED SPRING WASHER 8MM PLATED SETSCREW M8 X 16MM PLATED 2 * PLATE - GEARBOX MOUNTING SETSCREW M12 X 30MM PLATED SPRING WASHER 12MM PLATED 4 * GEAR BOX HITON LS 3:1 SAE B/A SETSCREW M12 X 30MM PLATED SPRING WASHER 12MM PLATED GASKET - PUMP FACE PUMP - ULTRA 3PL REV DRIVE 1 * STUD - M12 X NUT M12 PLATED 2 * STUD M10 X 34MM NUT M10 PLATED PUMP - ULTRA 1PX100 REV DRIVE 1 * CONNECTOR 1P E4Z OUT - PLATED SCKT CAPSCREW 5/16"UNC X 2.1/ BONDED SEAL 1/2"BSP ADAPTOR 1/2" BSP X 3/8" BSP BONDED SEAL 1/2"BSP ADAPTOR 1/2 BSPM / 1 BSPM 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 7 2

16 1744 HYDRAULIC POWER CIRCUIT (WITHOUT PUMPS)

17 1744 HYDRAULIC POWER CIRCUIT (WITHOUT PUMPS) 1197 REF PART NO DESCRIPTION QTY HYDRAULIC POWER CIRCUIT HOSE 1" BSP ST X 90 S.SEAL ADAPTOR-SWIVEL 90 1"BSP M/F ADAPTR 1"BSP BULKHEAD C/W LNUT ADAPTOR-SWIVEL 90 1"BSP M/F ADAPTOR 3/4"BSP X 1"BSP BONDED SEAL 3/4"BSP BONDED SEAL 1"BSP 1 * RELIEF VALVE/DIVERTER-ELECTRIC SEAL KIT - FOR ADAPTOR 3/4"BSP X 1"BSP ADAPTOR 1"BSP X 1"BSP ADAPTOR-SWIVEL TEE 1"BSP F/M/M HOSE 1"BSP ST X 90 S.SEAL HOSE 1"BSP ST X 90 S.SEAL ADAPTR 1"BSP BULKHEAD C/W LNUT HOSE 1"BSP ST X ST S.SEAL HOSE 1"BSP ST X ST S.SEAL HOSE 1"BSP ST X 135 S.S'L * BRACKET - HOSE MOUNT FLAT WASHER 8MM PLATED NUT M8 PLATED BONDED SEAL 3/8"BSP ADAPTOR 3/8BSP X 1/4BSP ADAPTOR 1/2" BSP X 3/8" BSP HOSE 1/2"BSP ST X 90 S.SEAL ADAPTOR-SWIVEL 90 1/2"BSP M/F HOSE 3/8"BSP ST X 90 S.SEAL ADAPTOR F/M/M 3/8 X 3/8 X 1/4 BSP BONDED SEAL 1/4"BSP Q/R COUPLING 1/4" BSP MALE ADAPTOR 3/8"BSP X 3/8"BSP EXT.D LOCK NUT (THIN) 3/8"BSP PLATED ADAPTOR-SWIVEL 90 3/8"BSP M/F 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 8 2

18 1744 HYDRAULIC POWER CIRCUIT (WITH PUMPS)

19 1744 HYDRAULIC POWER CIRCUIT (WITH PUMPS) 0997 REF PART NO DESCRIPTION QTY PUMP CIRCUIT B UC-SE-1324 SUCTION BONDED SEAL 1.1/2"BSP ADAPTOR 1.1/2" X 1.1/2" BSP PL SUCTION HOSE - TWIN PUMP O RING * SPLIT FLANGE 1.1/2"SAE 3000PSI CAPSCREW 1/2"UNC 1.1/4"LGBZP HOSE 1"BSP ST X 90 S.SEAL HOSE 1"ST(BSP) X 90FLANGE 1160LG O RING * SPLIT FLANGE 1"SAE3000PSI CAPCREW 3/8"UNC 1.1/4"LGBZP ADAPTOR-SWIVEL 90 1"BSP M/F ADAPTOR 3/4"BSP X 1"BSP BONDED SEAL 3/4"BSP BONDED SEAL 1"BSP 1 * RELIEF VALVE/DIVERTER-ELECTRIC SEAL KIT - FOR ADAPTOR 3/4"BSP X 1"BSP ADAPTOR 1"BSP X 1"BSP ADAPTOR-SWIVEL TEE 1"BSP F/M/M ADAPTR 1"BSP BULKHEAD C/W LNUT HOSE 1"BSP ST X ST S.SEAL HOSE 1"BSP ST X ST S.SEAL HOSE 1"BSP ST X 135 S.S'L ADAPTOR-SWIVEL 90 1"BSP M/F BONDED SEAL 3/8"BSP ADAPTOR 3/8BSP X1/4BSP ADAPTOR 1/2" BSP X 3/8" BSP HOSE 1/2"BSP STX90 S.SEAL ADAPTOR-SWIVEL 90 1/2"BSP M/F HOSE 3/8"BSP ST X 90 S.SEAL ADAPTOR F/M/M 3/8 X 3/8 X 1/4 BSP BONDED SEAL 1/4"BSP Q/R COUPLING 1/4" BSP MALE 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 9 2

20 1744 CONTROL VALVE MOUNTINGS

21 1744 CONTROL VALVE MOUNTINGS 0997 REF PART NO DESCRIPTION QTY CONTROL VALVE MOUNTINGS * BRACKET - VALVES MOUNTING SPRING WASHER 8MM PLATED NUT M8 PLATED BOLT M8 X 100MM PLATED 2 * COVER - VALVE SETSCREW M12 X 25MM PLATED FLAT WASHER 12MM PLATED SPRING WASHER 12MM PLATED 2 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 10 2

22 1744 CONTROL VALVE ASSEMBLY

23 1744 EPP II CONTROL VALVE ASSEMBLY 1297 REF PART NO DESCRIPTION QTY EPP II CONTROL VALVE ASSEMBLY SCREW M5 X 16MM 8.8 GRADE CONTROL VALVE 4 SERVICE RELIEF VALVE CARTRIDGE 207BAR CETOP 3 VENT VALVE SPOOL VALVE PROPORTIONAL CETOP 3 CLOSED CENTRE RELIEF VALVE CARTRIDGE CETOP 3 SINGLE PO CHECK VALVE CETOP 3 DUAL PO CHECK VALVE VALVE CARTRIDGE - HEAD FLOAT CETOP 3 MOTOR SPOOL VALVE BONDED SEAL 1/2"BSP ADAPTOR 1/2" BSP X 3/8" BSP ADAPTOR 1/2" BSP X 1/2" BSP BONDED SEAL 3/8"BSP ADAPTOR 3/8 BSP X1/4 BSP RESTRICTOR 3/8" X 1/4"BSP 1.00MM RESTRICTOR 3/8 X 1/4 BSP 1.00MM RESTRICTOR 3/8" X 1/4"BSP RESTRICTOR 3/8" X 1/4"BSP RESTRICTOR 3/8" X 1/4"BSP RESTRICTOR 3/8" X 1/4"BSP 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 11 2

24 1744 REMOTE CONTROL ASSEBLY 4 SERVICE

25 1744 EPP II REMOTE CONTROL ASSEMBLY 0797 REF PART NO DESCRIPTION QTY EPP II REMOTE CONTROL ASSEMBLY CONTROL BOX EPPII 4SERV + MTR 1 * CABLE ASSY - 2 CORE X 5.5M HEAVY FUSE - 15A IN-LINE WIRE LOOM 6M WIRE LOOM AUXILIARY MOTOR CONTROL DECAL - 4 SERVICE 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 12 2

26 1744 REMOTE CONTROL ASSEMBLY CAB SIDE MOUNTING

27 1744 EPP II RCA CAB SIDE MOUNTING 0797 REF PART NO DESCRIPTION QTY EPP II RCA CAB SIDE MOUNTING BRACKET - CAB MOUNTING 1 * PLATE - CONTROL BOX SETSCREW M8 X 25MM PLATED FLAT WASHER 8MM PLATED SPRING WASHER 8MM PLATED WING NUT M8 - PLATED 2 * CLAMP SINGLE 1" BOLT M6 X 55 MM 8.8 GRADE Z/P NUT NYLOC M6.Z/P COVER PLATE 3 * PLATE - LEVER MOUNTING SPRING WASHER 6MM PLATED WINGNUT - M6 X BOLT M6 X 45 MM 8.8 GRADE Z/P BOLT M6 X 55 MM 8.8 GRADE Z/P. 3 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 13 2

28 1744 RAM CIRCUITS

29 1744 RAM CIRCUITS 0997 REF PART NO DESCRIPTION QTY FIRST RAM CIRCUIT * RAM ASSY-D/A 80 BORE X 615 STK GREASE NIPPLE M SEAL KIT FOR XX RAMS BONDED SEAL 3/8"BSP ADAPTOR 3/8" BSP X 3/8" BSP ADAPTOR 3/8BSP X1/4BSP ADAPTOR-SWIVEL ST 3/8BSP M/F BONDED SEAL 3/8"BSP VALVE - ISOLATING 3/8" BSP RESTRICTOR 3/8" X 1/4 BSP HOSE 1/4"BSP ST X ST S.SEAL HOSE 1/4"BSP ST X 90 S.SEAL PLASTIC BUSH - 42 X SECOND RAM CIRCUIT * RAM ASSY-D/A 60 BORE X 605 STK GREASE NIPPLE M SEAL KIT FOR XX RAMS BONDED SEAL 3/8"BSP RESTRICTOR 3/8" X 1/4BSP ADAPTOR 3/8 BSP X1/4BSP ADAPTOR - SWIVEL 90 1/4"BSP MF HOSE 1/4"BSP ST/ST S.SEAL HOSE 1/4"BSP ST X ST S.SEAL PLASTIC BUSH - 32 X COWL RAM CIRCUIT B49 * RAM ASSY - D/A 60 BORE X 430 STK GREASE NIPPLE M SEAL KIT FOR XX RAMS BONDED SEAL 3/8"BSP ADAPTOR 3/8BSP X1/4BSP ADAPTOR 3/8BSP X1/4BSP ADAPTOR - SWIVEL 90 1/4"BSP MF HOSE 1/4"BSP ST X ST S.SEAL HOSE 1/4"BSP ST X ST S.SEAL *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 14 2

30 1744 SLEW RAM CIRCUIT

31 1744 SLEW RAM CIRCUIT 1297 REF PART NO DESCRIPTION QTY SLEW RAM CIRCUIT * RAM ASSY - 60 BORE 40 ROD SEAL KIT FOR XX RAMS BONDED SEAL 3/8"BSP RESTRICTOR 3/8 BSP X 1/4 BSP 0.75MM RESTRICTOR 3/8 BSP X 1/4 BSP 1.27MM HOSE 1/4"BSP ST X 90 S.SEAL HOSE 1/4"BSP ST X ST S.SEAL ADAPTOR - TEE 1/4"BSP F/M/M HOSE 1/4"BSP ST X 90 S.SEAL ACCUMULATOR 1.4LT - 90 BAR SETSCREW M10 X 30MM PLATED SPRING WASHER M10 PLATED NUT M10 PLATED 2 * BRACKET - ACCUMULATOR M33 BULKHEAD NUT 'THIN' M22 BONDED SEAL ADAPTOR M22 X 3/8"BSP MF BONDED SEAL 3/8" BSP RESTRICTOR 3/8" X 1/4" BSP *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 15 2

32 1744 ACCUMULATOR KIT

33 1768 ACCUMULATOR KIT 0797 REF PART NO DESCRIPTION QTY ACCUMULATOR KIT B54/49 * CLAMP - HYDRA-CUSHION SETSCREW M10 X 35MM PLATED SELF-LOCKING NUT M10 PLATED ACCUMULATOR 0.7 LTR (30 BAR) BONDED SEAL 1/2"BSP ADAPTOR 1/2" BSP X 3/8" BSP BONDED SEAL 3/8"BSP VALVE - ISOLATING 3/8" BSP ADAPTOR 3/8" BSP X 3/8" BSP HOSE 3/8"BSP STX90 S.SEAL ADAPTOR-TEE 3/8F-3/8M+3/8M 1 * BRACKET ACCUMULATOR SPRING WASHER 10MM PLATED NUT M10 PLATED DECAL - ARM FLOAT 1 *MAIN PART IN GROUP, RELATED PARTS HAVE SAME REFERENCE NUMBER 16 2

34 1744 DECALS

35 1744 DECALS 0797 REF PART NO DESCRIPTION QTY DECALS DECAL - MAX PTO SPEED 540 ACW DECAL - READ INSTRUCTION BOOK DECAL - STAY CLEAR O'HD CABLES DECAL - DON'T STAND UNDER ARMS DECAL - TRANSPORT DECAL - KEEP OUT ZONE DECAL - SLEW DANGER DECAL - RESIDUAL PRESSURE DECAL - SHAFT ENTANGLEMENT DECAL - HOT SURFACE DECAL - ARMS HIT CAB (REAR) DECAL - OIL FILTER DECAL-GREASE (8 HOURS) DECAL - PINCH POINT DECAL - OIL LEVEL DECAL - APPROVED OILS DECAL - OIL FILTER CHANGE DECAL - KEEP NUTS TIGHT DECAL - LIFT POINT 1500 KG DECAL - B DECAL - BOMFORD LH DECAL - FM DECAL - POWER PLUS

36 1744 DECALS

37 1744 DECALS 0797 REF PART NO DESCRIPTION QTY DECALS DECAL - MAX PTO SPEED 540 ACW DECAL - READ INSTRUCTION BOOK DECAL - STAY CLEAR O'HD CABLES DECAL - DON'T STAND UNDER ARMS DECAL - TRANSPORT DECAL - KEEP OUT ZONE DECAL - SLEW DANGER DECAL - RESIDUAL PRESSURE DECAL - SHAFT ENTANGLEMENT DECAL - HOT SURFACE DECAL - ARMS HIT CAB (REAR) DECAL - OIL FILTER DECAL-GREASE (8 HOURS) DECAL - PINCH POINT DECAL - OIL LEVEL DECAL - APPROVED OILS DECAL - OIL FILTER CHANGE DECAL - KEEP NUTS TIGHT DECAL - LIFT POINT 1500 KG DECAL - B DECAL - BOMFORD LH DECAL - FM DECAL - POWER PLUS