XH1500/XH1000 S2 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO

Size: px
Start display at page:

Download "XH1500/XH1000 S2 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO"

Transcription

1 Published: 0/0 XH00/XH000 S ROTARY CUTTERS S/N C00 C0 inclusive PARTS MANUAL C0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this Parts Manual during final inspection at the factory. If the Operators Manual is missing at any time, please contact Schulte Industries Ltd. At (0) - to receive your free replacement manual. Schulte Industries Ltd. PO Box 0 Englefeld Saskatchewan Canada S0K N0 Tel. (0) - Fax. (0) - Parts Fax. (0) -0 info@schulte.ca Web: ATENCIÓN! LEA EL INSTRUCTIVO Si No Lee Ingles, Pida Ayuda a Alguien Que Se Lo Lea Para Que le Traduzca Las Medidas de Seguridad 00 Alamo Group

2 Parts Ordering Guide The following instructions are offered to help eliminate delay and error in processing purchase orders for the equipment in this section.. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts were ordered.. The Purchase Order must clearly list the quantity of each part, the complete and correct part number, and the description of the part.. Schulte Industries Ltd reserves the right to substitute parts where applicable.. Schulte Industries Ltd reserves the right to change prices without prior notice. NOTE: NOTE: NOTE: Please refer to the Safety Section in the front of the Operators Manual for the proper Part Number when ordering Replacement Safety Decals. Safety decals are available free of charge from the Schulte Parts Department. If the Operators Manual does not accompany this Parts Manual please obtain one, free of charge from the Schulte Parts Department. DO NOT operate this implement unless you READ, UNDERSTAND, and FOLLOW the Safety and Operation instructions contained in the Operators Manual Please note that the appearance of some parts may vary from the artwork shown in the Manual. For maximum safety and to guarantee optimum product reliability, always use genuine Schulte Parts. The use of inferior replacement parts may cause premature or catastrophic failure, which could result in serious injury or death. Direct any questions regarding parts to: Schulte Industries Ltd P.O. Box 0 Englefeld, Saskatchewan Canada S0K N0 Phone: (0)-- Parts Fax: (0) -0 info@schulte.ca

3 TABLE OF CONTENTS XH00S-Center Section Frame... XH00S-Wing Frame Right... XH00S-Wing Frame Left... XH00S-Hitch Frame and Center Wheel Beam... Precision Hitch C XH00S-Equal Angle Hitch... XH000S-Skirt Assembly... Hitch Jack XH00S-Hub Axle Tire... XH00S-Walking Axle Kit for Wings... XH00S-Blade Carriers... XH00S-Chain Guard Kits... XH00S-Driveline Shielding... XH00S-Wing Lift Circuit Standard... Hydraulic Cylinder, XH00/XH000 S Main Lift Circuit... Hydraulic Cylinder XH00S-Phasing Circuit... Hydraulic Cylinder, 00-0, 00-0, Spool Valve Kit, 0', C Spool Valve Kit, ', C XH00S-Double Acting Wing Cylinder Kit... XH00S-Independant Double Acting Cylinder Kit... XH00S-Wing Winch Kit C Driveline, 0-, Driveline, Slip Clutch, -0R... Slip Clutch, -0R... Driveline, Driveline, Driveline, Gearbox, 0-, Gearbox, 0-0, Gearbox, 0-0, Gearbox, Gearbox, XH00S-Towing Hitch Kit... XH00S-Wing Wheel Shield Kit... Safety Chain S Transport Light Kit S Part Index... C0-00P - Page iii - 0/0 00 Alamo Group Inc.

4 XH00S-CENTER SECTION FRAME C0-00P - Page - 0/0 00 Alamo Group Inc.

5 XH00S-CENTER SECTION FRAME C C0- C C C C0- CS0-0-0 C0- C0- C0- C0- C C0- C C C C Qty Description Divider gear box,bp, S000, 0 rpm, SEE 0- Divider gear, BP, S0, 0 rpm. Divider gear box,bp, S0000, 000 rpm, SEE 0-,Divider box BP, S0, 000 rpm, Lockwasher, / Bolt, / x -/ UNC, GR, plated, Center Section Assembly, Bolt, / x -/ UNC, GR, plated, Locknut, / UNC, plated Skid shoe mount assembly,rh, Skid shoe mount assembly,lh, Locknut, / UNC, plated Washer, /, AS type A, / IDx-/ ODx.0, Skid shoe, center, Plow bolt, / x -/ UNC, Bolt, / x -/ UNC, GR, plated, Grease nipple, self-tap, /- Pin, x -/, useable length, Washer, ", -/" ID x " OD SAE Roll pin, / x, Pin, x -/" U.L. Pin, " x -/" U.L. Bolt, / x UNC, GR, Spacers Transport Lock Bars, Pin, -/ useable length Transport Lock Bar Right Transport Lock Bar Left Transport Pin, " x -/", Linch pin, / standard, Bolt, / x UNC, GR, Washer, /", Locknut, / UNC, plated P/N 0-0 P/N C0- P/N C0- P/N 0-0 P/N 0- P/N C0- P/N 0-0 P/N 0-0 P/N 0-0 P/N 0-0 P/N 0-0 P/N -0 P/N C0- P/N -00 P/N 0-0 P/N -0 P/N 0-00 P/N -0 P/N 0-0 P/N 0-00 P/N C C0-00P - Page - 0/0 00 Alamo Group Inc.

6 XH00S-WING FRAME RIGHT C0-00P - Page - 0/0 00 Alamo Group Inc.

7 XH00S-WING FRAME RIGHT C C0-0 C0- C C0- C C0- C0- C C0-0-0 C0-B C C0- C C0- C0- C Qty 0 Description Right Wing Assembly Roll pin, / x, Washer, ", -/" ID x " OD SAE Round Bar, Drilled Floating Lug Hinge Pin, -/ Bolt, / x -/ UNC, GR, plated, Pin, x -/" U.L. Hinge Line spacer,-/ UL. Washer, /, AS type A, / IDx-/ ODx.0, Locknut, / UNC, plated Hinge Pin, ", Hinge line spacer,-/ Hinge Pin, -/ Lg Bolt, / x -/ UNC, GR, Locknut, / UNC, plated Ratchet jack,." CPC, " stroke Grease nipple, self-tap, /- Bolt, / x -/ UNC, GR, plated, Tension bushing," x -/" x /" lg. Bolt, / x UNC, GR, plated Pin, x -/, useable, Bolt, / x / UNF, GR, plated, Wing wheel standard, bolt in axle, LESS axle, RH, Pin, x -/", useable length, Locknut, / UNC, plated Rubber sandwich mount, Upper Rubber Mount Wing Wing Adjustment Assembly Lock washer, -/ Plow bolt, / x -/ UNC, Jam nut, -/" UNC, plated Bevel gear drive, BP 00, :., -/" z, Bevel gear drive, BP 00, :., -/"z, Bolt, /" x -/", UNC, Gd, plated, Locknut, / UNC, plated Bolt, / x UNC, GR, Lockwasher, /", Bolt Access Cover Plate, Skid rear, wing, Skid shoe front, right, Hose organizer, ", /" wire, /" mount hole, Washer, /", Bolt, / x -/ UNC, GR, plated, Spindle c/w nut, washer, -/" x 0-/", S Bolt, / x -/ UNC, GR, plated C0-00P - Page - 0/0 00 Alamo Group Inc.

8 XH00S-WING FRAME LEFT C0-00P - Page - 0/0 00 Alamo Group Inc.

9 XH00S-WING FRAME LEFT C C0-0 C0- C C0- C C0- C0- C C0-0-0 C0-B C C0- C C0- C0- C Qty 0 Description Left Wing Assembly Roll pin, / x, Washer, ", -/" ID x " OD SAE Round Bar, Drilled Floating Lug Hinge Pin, -/ Bolt, / x -/ UNC, GR, plated, Pin, x -/" U.L. Hinge Line spacer,-/ UL. Washer, /, AS type A, / IDx-/ ODx.0, Locknut, / UNC, plated Hinge Pin, ", Hinge line spacer,-/ Hinge Pin, -/ Lg Bolt, / x -/ UNC, GR, Locknut, / UNC, plated Ratchet jack,." CPC, " stroke Grease nipple, self-tap, /- Bolt, / x -/ UNC, GR, plated, Tension bushing," x -/" x /" lg. Bolt, / x UNC, GR, plated Pin, x -/, useable, Bolt, / x / UNF, GR, plated, Wing wheel standard, bolt in axle, LESS axle, RH, Pin, x -/", useable length, Locknut, / UNC, plated Rubber sandwich mount, Upper Rubber Mount Wing Wing Adjustment Assembly Lock washer, -/ Plow bolt, / x -/ UNC, Jam nut, -/" UNC, plated Bevel gear drive, BP 00, :., -/"z, Bevel gear drive, BP 00, :., -/"z, Bolt, /" x -/", UNC, Gd, plated, Locknut, / UNC, plated Bolt, / x UNC, GR, Lockwasher, /", Bolt Access Cover Plate, Skid rear, wing, Skid shoe front, left, Hose organizer, ", /" wire, /" mount hole, Washer, /", Bolt, / x -/ UNC, GR, plated, Spindle c/w nut, washer, -/" x 0-/", S Bolt, / x -/ UNC, GR, plated C0-00P - Page - 0/0 00 Alamo Group Inc.

10 XH00S-HITCH FRAME AND CENTER WHEEL BEAM C0-00P - Page - 0/0 00 Alamo Group Inc.

11 XH00S-HITCH FRAME AND CENTER WHEEL BEAM CS CS C0- -0 CS C0- C0- C0- C C C C C0-0 C0- C C0- C C Qty Description Open Clevis Grease nipple, self-tap, /- Bolt, / x -/ UNC, GR, plated, Pin, " x -/', Washer, /, AS type A, / IDx-/ ODx.0, Bolt, / x -/ UNC, GR, plated, Machine bushing, -/" x -/" x 0ga. Locknut, / UNC, plated Locknut, / UNC, plated Pivotting jack mount, Tension bushing, -/'x -/" x /' lg. Hitch Swivel, Tension bushing," x -/" x /" lg. Tension bushing, " x -/" x " lg. Washer, ", -/" ID x " OD SAE Roll pin, / x, Lift Rod, Left & Right, SEE C0-, Lift Rod Right Level Rod Pin, Front Pin, x -/ U.L. Jam nut, " UNC, plated Lift Rod Lug Bolt, / x -/ UNC, GR, plated, Level Rod Pin, back XH00 Spacer sleeve, walking axle Seal Bearing, tapered roller, Race, tapered, Pivot pin, walking beam Machine bushing, -/" x " x ga., balck Slotted nut, x UNS, GR, plated Cotter pin, / x -/, Center Section Wheel Standard, Tension bushing, "x -/" x -/" lg. Bolt, / x -/ UNC, GR, Lockwasher, / Hitch Assembly, XH00 SERIES, Wheel standard arm, Center section, PTO storage support, Bent hitch pin, /" dia. x " useable, c/w clip Hitch pin clip, /", wire dia. #0, Walking beam,lh, Bolt in axle, less spindle, Walking beam,rh, Bolt in axle, less spindle, Spindle c/w nut, washer, -/" x -/", S Bolt, / x -/ UNC, GR, plated Solid Tongue Walking beam repair kit, Bolt, / x UNC, GR, plated Washer, / Locknut, / UNC, plated Linch pin, /" standard C0-00P - Page - 0/0 00 Alamo Group Inc.

12 PRECISION HITCH C DRAWBAR C0-00P - Page - 0/0 00 Alamo Group Inc.

13 PRECISION HITCH C C000-0 C000-0 C C000-0 C C C Qty Description Bolt, / x -/ UNC Bolt, / x -/ UNC Bolt, -/ x -/ UNF Drawbar Clevis Top Hitch Tongue Grease Nipple, / NPT Spacer Draw Bar Clevis Base Lock Nut, -/ UNF Clamp Bar Lock Nut, / UNC Lock Washer, / Cotter Pin, / x -/ Machine Bushing Spacer (Only Required if Hitch Tongue is Tight) Precision Hitch C0-00P - Page 0-0/0 00 Alamo Group Inc.

14 XH00S-EQUAL ANGLE HITCH C0-00P - Page - 0/0 00 Alamo Group Inc.

15 XH00S-EQUAL ANGLE HITCH C0- C0- C C0- C0- C C S C C0- C0- C C NOTE: 0 RPM Equal Angle Hitch uses a non-cv Driveline NOTE: 000 RPM Equal Angle Hitch uses 0-0 Driveline Qty Description Swivel yoke Hitch swivel frame Swivel hitch retainer Bolt, /" x " UNC Bolt, /" x " INC Jack mount Equal angle hitch Retainer pin, " x -/" UL Washer, " SAE Retainer pin, -/" x -/" UL Washer, /" SAE Machine bushing, -/" x -/" x 0ga. Locknut, /" UNC Bolt, /" x -/" UNC Bolt, /" x " UNC Washer, /" Locknut, /" UNC Bolt, /" x " UNC Locknut, /" UNC Safety chain *attachment link shown only Washer, -/" ID x -/" OD x /" Locknut, " UNC Bolt, " x " UNC Mount, PTO stand Grease zerk, self tap Sleeve Hitch block Spacer, 0ga Spacer plate Bolt, /" x -/" UNC Replacement bushing, " x -/" x " long PTO cradle Replacement PTO spool, " Decal, "IMPORTANT...non-CV shaft..." Replacement bushing, "x -/"x /" long Replace. bushing, -/" x -/" x " long Roll pin, /" x -/" Grease zerk, 0 deg self tap Lock washer, /" Roll pin, /" x " Machine Bushing, /" x /" x ga C0-00P - Page - 0/0 00 Alamo Group Inc.

16 XH000S-SKIRT ASSEMBLY C0-00P - Page - 0/0 00 Alamo Group Inc.

17 XH000S-SKIRT ASSEMBLY C C C0-0 C C0-0 C C Qty 0 Description Bolt, / x -/ UNC, GR, plated, 0' Skirt, Chain Guard, Washer, /, AS type A, / IDx-/ ODx.0, 0' Counter Weight, Locknut, / UNC, plated Bolt, / x -/ UNC, GR, plated, 0' Skirt Rear Hinge Pin, 0' Skirt Assembly, Locknut, ", unc, Washer, ", -/" ID x " OD SAE Bolt, x UNC, GR, plated Bolt, x UNC, GR, plated 0' Skirt, Rear Skid 0' Skirt, Front Skid, Plow bolt, / x -/ UNC, Bolt, / x UNC, GR, plated 0' Skirt Retainer Pin, Washer, /", Locknut, / UNC, plated Chain, links, / exact proof coil, plated Locknut, / UNC, plated Washer, /", Bolt, / x -/ UNC, GR, pl;ated, C0-00P - Page - 0/0 00 Alamo Group Inc.

18 HITCH JACK C0-00P - Page - 0/0 00 Alamo Group Inc.

19 HITCH JACK Qty Description Cover Bushing Gear Carriage bolt, /" x " UNC Cotter pin, /" x " Dowel Handle Nut, /" UNC Body Pin Bearing Washer Acme nut Dowel Acme screw Leg C0-00P - Page - 0/0 00 Alamo Group Inc.

20 XH00S-HUB AXLE TIRE C0-00P - Page - 0/0 00 Alamo Group Inc.

21 XH00S-HUB AXLE TIRE Qty Description Washer, " ODx -/"ID x /" TH Plain Spindle c/w nut, washer, -/" x -/", S Spindle c/w nut, washer, -/" x 0-/", S Seal, Outer bearing Outer race,h Hub, c/w races, H-, SEE 0-0C, Race, Bearing Machine bushing, /" ID x -/" OD x 0 ga. Castle nut, /- UNF, SEE 0-0H Bolt, / x / UNF, GR, plated RIM, pce., bolt, black (fits xx laminated) Bolt, / x UNC, GR, Tire, solid laminated, X x Laminated tire,xx, bolt rim on."pcd & "pilot Nut, /", unc, Cotter pin, / x, plated Grease nipple, self-tap, /- Lockwasher, /", Hub assembly, H- c/w hardware, LESS BOLTS Wheel repair kit,, Aircraft assy,x.x0,recapped, pce bolt rim Bolt, / x -/ UNC, GR, plated Locknut, / UNC, plated Tube, x0 x. Aircraft, (TUBE ONLY) Lockwasher, / C0-00P - Page - 0/0 00 Alamo Group Inc.

22 XH00S-WALKING AXLE KIT FOR WINGS C0-00P - Page - 0/0 00 Alamo Group Inc.

23 XH00S-WALKING AXLE KIT FOR WINGS C0- C0- C0- C Qty Description Pivot pin, walking beam Bearing, tapered roller, Race, tapered, Seal Slotted nut, x UNS, GR, plated Bolt, / x -/ UNC, GR, Lockwasher, / Machine bushing, -/" x " x ga., balck Cotter pin, / x -/, Grease nipple, self-tap, /- Spacer sleeve, walking axle Wing walking beam standard, left, Wing walking beam standard, right, Wing walking beam, LH,WELD IN AXLE, SEE ATTACHMENT Wing walking beam, RH,WELD IN AXLE, SEE ATTACHMENT Hub assembly, H- c/w hardware, LESS BOLTS Laminated tire,xx, bolt rim on."pcd & "pilot Aircraft assy,x.x0,recapped, pce bolt rim Bolt, / x / UNF, GR, plated Spindle c/w nut, washer, -/" x -/", S Washer, /, AS type A, / IDx-/ ODx.0, Locknut, / UNC, plated Bolt, / x -/ UNC, GR, plated Walking beam repair kit, C0-00P - Page 0-0/0 00 Alamo Group Inc.

24 XH00S-BLADE CARRIERS 0 C0-00P - Page - 0/0 00 Alamo Group Inc.

25 XH00S-BLADE CARRIERS Qty Description Blade carrier, ft, /" skin, complete Blade carrier, ft, /" skin, complete Pan only, ft, /" Pan only, ft, /" Pan reinforcements, ft Pan reinforcements, ft Bushing, blade bolt Locknut, -/- UNF Blade, /" x " x ", CW (Super Suction) Blade, /" x " x ", CW (Regular) Blade, /" x " x ", CCW (Super Suction) Blade, /" x " x ", CCW (Regular) Blade, /" x " x ", CCW, ' Optional (Super Suction) Blade, /" x " x ", CCW, ' Optional (Regular) Blade, /" x " x ", CW (Super Suction) Blade, /" x " x ", CW (Regular) Blade bolt, -/- UNF, /" Blade bolt & nut, /" Blade bolt, shredder kit Blade bolt & nut, shredder kit Blade, /" x " x ", wing (Shredder Kit) Blade, /" x " x ", center (Shredder Kit) Brush blade, wing Brush blade, center C0-00P - Page - 0/0 00 Alamo Group Inc.

26 XH00S-CHAIN GUARD KITS 0 0 C0-00P - Page - 0/0 00 Alamo Group Inc.

27 XH00S-CHAIN GUARD KITS 0 0 C0- C0- C0- C0- C0- C C0- C Qty Description Chain guard double, wing front Chain guard double, center front ext. Chain guard double, center front int. Chain guard double, center rear Chain guard double, wing rear Chain guard double, wing rear ext. Bolt, / x -/ UNC Flat washer, / Lock nut, / Chain, / proof coil, links Bolt, / x UNC Bolt, / x -/ UNC Flat washer, / Lock nut, / UNC Bolt, / x Chain guard double, center rear exterior Chain guard double, wing rear interior Cable, chain guard, " long Cable, chain guard, /" long Cable, chain guard, " long Cable, chain guard, " long Cable, chain guard, -/" long (XH00) Cable, chain guard, -/" long (XH000) Cable clamp, /" C0-00P - Page - 0/0 00 Alamo Group Inc.

28 XH00S-DRIVELINE SHIELDING 0 C0-00P - Page - 0/0 00 Alamo Group Inc.

29 XH00S-DRIVELINE SHIELDING 0 C C0-0 C C C0-0 C C0-0 C0-0 C Qty Description Center section shield assembly Lock washer, /" Bolt, / x / UNC Lynch pin, / standard Splitter shield mount Shield hinge pin Bolt, M X 0mm Splitter shield rest bracket Cotter pin, / X Splitter gearbox, 0 RPM Splitter gearbox, 000 RPM Center gearbox pivot shield mount 0' Center gearbox pivot shield mount Lock nut, / UNC Bolt, / x UNC Left wing gearbox pivot shield Wing gearbox pivot mount Right wing gearbox shield Bolt, / x / UNC Flat washer, / Shaft cover plastic, 0' units C0-00P - Page - 0/0 00 Alamo Group Inc.

30 XH00S-WING LIFT CIRCUIT STANDARD C0-0 C Qty Description Cyl. X ORB Breather, filter /- ORB Elbow, /" ORB male X JIC male Hose assembly, / SW, " long Brass restrictor Pin, x -/ Retainer pin, x U.L. Roll pin, / x Flat washer, x Bolt, / x -/, UNC Flat washer, / Lock nut, /, UNC C0-00P - Page - 0/0 00 Alamo Group Inc.

31 HYDRAULIC CYLINDER, Qty Description Rod Casing Gland Piston nut Piston Seal kit C0-00P - Page - 0/0 00 Alamo Group Inc.

32 XH00/XH000 S MAIN LIFT CIRCUIT C0- C0- Qty Description Cylinder, welded, -/ x, -/" rod, RAM, Washer, ", -/" ID x " OD SAE Breather, plug, /- ORB, ENERGY Hose assy, ", / RAT hose, 000 psi Clevis pin, x -/" useable, Zinc Di-chromate Cotter pin, / x -/, Elbow,, /- ORB male x /- JIC male Restrictor, /- port size, /" orfice hole Depth control kit, -/ rod, Roll pin, / x, Pin, center section, Sleeve, C0-00P - Page - 0/0 00 Alamo Group Inc.

33 HYDRAULIC CYLINDER Qty Description Shaft,-/ dia,phasing Welded RAM, Depth control kit, -/ rod, Casing, -/", Std. ORB ports, Piston nut, / Piston, -/", phasing welded, Seal kit, -/", Gland, -/", phasing welded, Bolt, / x UNC, GR, Rod clevis, -/", Nut, /", unc, C0-00P - Page 0-0/0 00 Alamo Group Inc.

34 XH00S-PHASING CIRCUIT 0 0 C0-00P - Page - 0/0 00 Alamo Group Inc.

35 XH00S-PHASING CIRCUIT C0- C0- Qty Description Hose assembly / SW, " long Phasing Cylinder, -/ x Hose assembly, / SW, " long Brass restrictor, Flat washer, x Elbow, / ORB male X JIC male Phasing Cylinder, -/ x Hose assembly, / SW, " long Phasing Cylinder, x Hose assembly, / SW, " long Cotter pin, / x -/ Clevis pin, x -/ U.L. Elbow, o ORB x JIC Depth stop Roll pin, / x Pin, center section cylinder Sleeve, cylinder pin C0-00P - Page - 0/0 00 Alamo Group Inc.

36 HYDRAULIC CYLINDER, 00-0, 00-0, C0-00P - Page - 0/0 00 Alamo Group Inc.

37 HYDRAULIC CYLINDER, 00-0, 00-0, Qty Description " Casing -/" Casing -/" Casing Piston Nut " Piston -/" Piston -/" Piston " Wear Ring -/" Wear Ring -/" Wear Ring " Seal Kit -/" Seal Kit -/" Seal Kit " Gland -/" Gland -/" Gland Rod Depth Stop Jam Nut, -/: UNF Nut, /" UNC Bolt, /" x " UNC Clevis End C0-00P - Page - 0/0 00 Alamo Group Inc.

38 SPOOL VALVE KIT, 0', C0-0 WING LIFT CIRCUIT 0 PHASING CIRCUIT Qty Description Elbow, / NPT x / JIC Reducer, / NPTM x NPTF Elbow, / - JIC Elbow, / ORB x / JIC Hose assembly, / x " long Hose assembly, / x " long Hose assembly, / x " long Hose assembly, x 0" long Hose assembly, x " long Valve, spool Brass restrictor C0-00P - Page - 0/0 00 Alamo Group Inc.

39 SPOOL VALVE KIT, ', C0-0 WING LIFT CIRCUIT 0 PHASING CIRCUIT Qty Description Elbow, / ORB x / JIC Reducer, / ORB x / NPTF Elbow, / - JIC Elbow, / ORB x / JIC Hose assembly, / x " long Hose assembly, / x " long Hose assembly, / x " long Hose assembly, / x 0" long Hose assembly, / x " long Valve, spool Brass restrictor C0-00P - Page - 0/0 00 Alamo Group Inc.

40 XH00S-DOUBLE ACTING WING CYLINDER KIT NOTE: "Tee" Connection Qty Description Male tee, /- JIC Elbow, 0 deg /- ORB Hose assembly ", / SW Hose assembly ", / SW C0-00P - Page - 0/0 00 Alamo Group Inc.

41 XH00S-INDEPENDANT DOUBLE ACTING CYLINDER KIT NOTE: Independent Wings Qty Description Hose assembly ", / SW Elbow, 0o /- ORB C0-00P - Page - 0/0 00 Alamo Group Inc.

42 XH00S-WING WINCH KIT C0-00 C0-00P - Page - 0/0 00 Alamo Group Inc.

43 XH00S-WING WINCH KIT C C0-0 C C Qty Description Brake winch, Fulton K0, 00 lbs..:, Bolt, / x -/ UNC, GR, plated Locknut, / UNC, plated Backing plate, winch, Wing winch kit stand, XH000 & XH00, Bolt, / x -/ UNC, GR, plated, Locknut, / UNC, plated Wing winch kit mount hook, XH000 & XH00, Bolt, / x -/ UNC, GR, Cable assy, ", /" A/C, c/w /" loop end C0-00P - Page 0-0/0 00 Alamo Group Inc.

44 DRIVELINE, 0-, 0- C0-00P - Page - 0/0 00 Alamo Group Inc.

45 DRIVELINE, 0-, R -0R NOTE: 0- - Center Driveline, 000 RPM NOTE: 0- - Center Driveline, 0 RPM Qty Description Yoke, split clamp style Yoke, Tapered Pin Grease nipple Circlip Cross kit complete Yoke, female Spline shaft, (BP) 0mm Spring dowel Clutch, FT/, 0 RPM Clutch, FTR/, 000 RPM Tapered pin & nut Bolt & nut Complete Shaft, 0 RPM Complete Shaft, 000 RPM C0-00P - Page - 0/0 00 Alamo Group Inc.

46 DRIVELINE, C0-00P - Page - 0/0 00 Alamo Group Inc.

47 DRIVELINE, R NOTE: Wing Driveline, 0/000 RPM Qty Description Outer bearing Outer cone set Outer safety tube Inner safety tube Inner cone set Inner bearing Slip clutch complete, BP FT/ Cross kit complete Flexible pin Inner tube yoke Inner tubing Ring nut Outer tubing Flexible pin Outer tube yoke Cross kit complete Yoke, tapered pin style Yoke, split clamp style Tapered pin & nut Bolt & nut Circlip Grease nipple Yoke and inner tube Yoke and outer tube Female universal joint half w/ shield Male universal joint half w/ shield Complete Shaft C0-00P - Page - 0/0 00 Alamo Group Inc.

48 SLIP CLUTCH, -0R R NOTE: Wing Driveline, 0/000 RPM NOTE: 0- - Center Driveline, 0 RPM Qty Description Screw Clutch Plate Bushing Lining Thrust Plate Hub Tapered pin & nut Screw Spring Spacer Complete Slip Clutch, FT/ C0-00P - Page - 0/0 00 Alamo Group Inc.

49 SLIP CLUTCH, -0R R NOTE: 0- - Center Driveline, 000 RPM Qty Description Screw Clutch Plate Bushing Lining Thrust Plate Hub Tapered pin & nut Screw Spring Spacer Complete Slip Clutch, FT/ C0-00P - Page - 0/0 00 Alamo Group Inc.

50 DRIVELINE, 0-0 C0-00P - Page - 0/0 00 Alamo Group Inc.

51 DRIVELINE, A A Qty Description SEE -0,Yoke, tractor cv, Size, -/ z, Cross kit, size, 0 deg, Grease nipple,deg. CV body, 0 deg, Yoke, inner, cv, lobe, size, Grease nipple, Flexible pin, 0mm X mm, Inner lobe tube, Outer lobe tube, Grease nipple, 0deg. M x, Grease fitting, Yoke, lobe outer, Cross kit, complete, Yoke, clamp style -/x0, size, Shield locking kit, Safety bell, Outer safety tube, Inner safety tube, Safety bell. Safety shield chains, Ball, /, SEE -0 Male half, implement end,size, Ball collar kit, Tractor half, cv, 0 rpm, Implement half, Size, Safety shield kit complete, c/w,cv shield, C0-00P - Page - 0/0 00 Alamo Group Inc.

52 DRIVELINE, 0- C0-00P - Page - 0/0 00 Alamo Group Inc.

53 DRIVELINE, 0-0 A A A Qty Description SEE -0,Yoke # Ball CV -/" z, 0 deg. Cross kit, cv size,0 deg, Grease nipple,deg. CV body, 0 deg. size, Yoke, CV, inner tube, lobe size, Grease nipple, Flexible pin, Inner lobe tube, Outer lobe tube, Grease nipple, 0deg. M x, Grease fitting, Yoke, outer lobe tube, size, Cross kit complete Yoke, Tapered pin style,size, -/z0, Shield clip kit, Safety bell, Outer safety tube, Inner safety tube, Bell with collar, Safety shield chains, CV safety shield set, CV retainer, SEE -0 Tractor half, 0 cv, size, 000 RPM, -/z, Implement half, size, Safety shield complete, c/w CV shield, SEE - C0-00P - Page 0-0/0 00 Alamo Group Inc.

54 DRIVELINE, 0-0 A C 0 C0-00P - Page - 0/0 00 Alamo Group Inc.

55 DRIVELINE, 0-0 A C NOTE: 0 RPM Equal Angle Hitch Tractor Assembly Qty Description Joint& shaft half assembly c/w guard Joint& tube half assembly c/w guard Safety slide lock kit Yoke, -/ x QD Cross kit Yoke & tube Nylon repair kit Outer guard Inner guard Yoke & tube Yoke, -/ x 0 Bolt, / x -/, UNC gr Locknut, / UNC Grease fitting Grease fitting, degree Complete shaft, 0 rpm equal angle C0-00P - Page - 0/0 00 Alamo Group Inc.

56 GEARBOX, 0-, 0- A 0 0 A 0 C0-00P - Page - 0/0 00 Alamo Group Inc.

57 GEARBOX, 0-, 0- NOTE: Always use a medium strength thread-locker product such as Loctite when reinstalling the Divider gearbox onto the rotary cutter. NOTE: 0- - Divider Gearbox, 0 RPM A NOTE: 0- - Divider Gearbox, 000 RPM Qty Description Housing Shaft Shaft Spacer Case Plug Snap Ring Split bushing Snap Ring Snap Ring Snap Ring Bearing, 0C Bearing Bearing, 0JR Oil Seal, 0 x x 0 Oil Seal, 0 x x 0 Breather Vent Oil Plug Bevel Pinion Gear, 0 RPM Bevel Pinion Gear, 000 RPM Snap ring Shim kit Shim Kit Crown Wheel, 0 RPM Crown Wheel, 000 RPM Bearing Spacer ring 0 RPM Gearbox, BP#S RPM Gearbox, BP#S0000 C0-00P - Page - 0/0 00 Alamo Group Inc.

58 GEARBOX, 0-0, C0-00P - Page - 0/0 00 Alamo Group Inc.

59 GEARBOX, 0-0, 0-0 NOTE: Left Wing & CCW Center, 0 RPM NOTE: Left Wing, 000 RPM NOTE: WHEN ORDERING GEARBOX PARTS PLEASE SUPPLY THE PART NUMBER STAMPED ON GEARBOX COVER Qty Description Oil plug Cover Gasket Ball bearing Cap, A Snap ring Pinion shaft, and Crown gear, 0 RPM Pinion shaft, and Crown gear, 000 RPM Housing, A Split shoulder ring Snap ring Cotter pin Hexagon slotted nut Washer Splined hub Extended splined hub Seal lid,(00 A) Sealing lid, (00 R) Oil seal Tapered roller bearing Oil drain Tapered roller bearing Ball bearing, (00 A) Tapered roller bearing, (00 R) Snap ring Input shaft, A Oil seal, A Crown, 0 RPM, c/w - Crown, 000 RPM, c/w - Hex screws, M x Bolt, / X -/ UNC Shim Kit, input shaft Lock nut, / UNC Shim Kit, input shaft Shim Kit, pinion shaft 0 RPM Gearbox, BP#S RPM Gearbox, BP#S000 C0-00P - Page - 0/0 00 Alamo Group Inc.

60 GEARBOX, 0-0, C0-00P - Page - 0/0 00 Alamo Group Inc.

61 GEARBOX, 0-0, 0-0 NOTE: Right Wing & CW Center, 0 RPM NOTE: Right Wing, 000 RPM NOTE: WHEN ORDERING GEARBOX PARTS PLEASE SUPPLY THE PART NUMBER STAMPED ON GEARBOX COVER Qty Description Oil plug Cover Gasket Ball bearing Cap, B Snap ring Pinion shaft & Crown gear, 0 RPM Pinion shaft & Crown gear, 000 RPM Housing, B Split shoulder ring Snap ring Cotter pin Hexagon slotted nut Washer Splined hub Extended splined hub Sealing lid, (00) Sealing Lid, (00) Oil seal Tapered roller bearing Oil drain Tapered roller bearing Ball bearing, (00) Tapered roller bearing, (00) Snap ring Input shaft Oil seal, B Crown, 0 RPM, c/w - Crown, 000 RPM, c/w - Hex screw, M x Bolt, / X -/ UNC Lock nut, / UNC Shim Kit, input shaft Shim Kit, pinion shaft 0 RPM Gearbox, BP#S RPM Gearbox, BP#S000 C0-00P - Page - 0/0 00 Alamo Group Inc.

62 GEARBOX, C0-00P - Page - 0/0 00 Alamo Group Inc.

63 GEARBOX, 0-0 NOTE: CCW Center Section, 000 RPM NOTE: WHEN ORDERING GEARBOX PARTS PLEASE SUPPLY THE PART NUMBER STAMPED ON GEARBOX COVER Qty Description Oil plug Cover Gasket Ball bearing Cap, A Snap ring Pinion shaft Housing, A Split shoulder ring Snap ring Cotter pin Hexagon slotted nut Washer Splined hub Extended splined hub Sealing Lid, (00) Oil seal Tapered roller bearing Oil drain Tapered roller bearing Tapered roller bearing 00 Snap ring Input shaft, A Oil seal, A Crown & Pinion,.: ratio Hex screw, M x Bolt, / X -/ UNC Lock nut, / UNC Locking nut Locking washer Spacer Shim Kit, (input shaft), (00) 000 RPM Gearbox, BP#S C0-00P - Page 0-0/0 00 Alamo Group Inc.

64 GEARBOX, C0-00P - Page - 0/0 00 Alamo Group Inc.

65 GEARBOX, 0-0 NOTE: CW Center Section, 000 RPM NOTE: WHEN ORDERING GEARBOX PARTS PLEASE SUPPLY THE PART NUMBER STAMPED ON GEARBOX COVER Qty Description Oil plug Cover Gasket Tapered bearing Cap, B Snap ring Pinion shaft Housing, A Cotter pin Hexagon slotted nut Washer Splined hub Extended splined hub Sealing lid Oil seal Tapered roller bearing Oil drain Tapered roller bearing Ball bearing Snap ring Input shaft Oil seal Crown & Gear set Hex screw, M x Bolt, / X -/ UNC Lock nut, / UNC Locking nut Locking washer Spacer Shim Kit, (input shaft) Complete Gearbox, BP#S C0-00P - Page - 0/0 00 Alamo Group Inc.

66 XH00S-TOWING HITCH KIT 0-00 C C Qty Description Locknut, / UNC, plated Towing Hitch Cutter Mount Tube, Locknut, ", unc, Telescoping Tube, Towing Hitch Locknut, / UNC, plated Bolt, x UNC, GR, plated Bolt, / x -/ UNC, GR, Bolt, / x UNC, GR, plated C0-00P - Page - 0/0 00 Alamo Group Inc.

67 XH00S-WING WHEEL SHIELD KIT C0- C0- C0- C0- C Qty 0 0 Description Wing wheel shield Deck hinge mount plate Shield support stand Hinge pin Side panel Bolt, / x UNC Locknut, / UNC Cotter pin, / x Lynch pin, / standard C0-00P - Page - 0/0 00 Alamo Group Inc.

68 SAFETY CHAIN S NOTE: 0,00 lbs capacity, " minimum length NOTE: This safety chain is intended as an auxiliary attaching system per ASAE S.. The safety chain will help control the rotary cutter should it accidentally separate from the drawbar. Do Not Use the Safety Chain for Towing. Replace the entire chain if any link or end fitting is broken, damaged or stretched. S Qty Description Safety Chain C0-00P - Page - 0/0 00 Alamo Group Inc.

69 TRANSPORT LIGHT KIT S000-0 S S Qty Description Transport light set, complete with harness Lock nut, /" UNC Safety Light Mount U-bolt, " x " long x /" UNC Bolt, / x /" UNC Washer, /" C0-00P - Page - 0/0 00 Alamo Group Inc.

70 PART INDEX , 0,, , , 0, , , , , , ,,,, , ,,,,, ,, , , , -0..., -0..., -0..., -0..., , , , , , , , ,, ,, , , , , , , C0-00P - Page - 0/0 00 Alamo Group Inc.

71 PART INDEX , , , ,,,, , ,,,, , , ,, 0,,, ,,,, , 0,, , , ,,,,, 0, ,,,, , , 0-..., ,,, , 0,,, ,,, , ,,,,,,,, , ,,, -0...,,,,,, 0,, -0...,, , -0..., , , , , ,,,,,, ,,, 0,, ,, ,,,,,,,,, 0, ,,,,,,, 0,,, 0, ,,,, 0,, , , 0,, ,, ,,,,,, ,, , ,, ,, , , , , ,, 0-...,, ,,, 0, -0...,, 0, C0-00P - Page - 0/0 00 Alamo Group Inc.

72 PART INDEX -0...,, 0, -0...,, 0, -0..., ,, 0, -0..., 0, -0...,, ,, ,, 0, -...,, 0, -...,, 0, -...,, 0, -...,, 0, -..., -...,, 0, -...,, 0, -...,, 0, -0...,, 0, -...,, -...,,, 0, -..., ,, ,, 0, -..., , -0..., -...0, -...0, -...0, -...0, -...,,, 0, -...,, 0, -...,, 0, -..., -..., -...0, -..., , , -0...,,, 0-0A..., , -0...,, R...,, , , C0-00P - Page - 0/0 00 Alamo Group Inc.

73 PART INDEX ,,, -..., A , -..., , , , R..., ,,, , , 0 C C C C C C C C C C C C0-..., C0-..., C0-... C0-... C0-... C0-... C0-... C0-B..., C0-..., C0-..., C0-... C C0-... C0-... C0-... C0-... C0-..., C0-... C0-... C0-... C0-00P - Page 0-0/0 00 Alamo Group Inc.

74 PART INDEX C0-0...,, C0-... C0-..., C0-..., C0-..., C0-..., C0-..., C0-..., C0-..., C0-... C C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C C C C C C C C C C C C C C C C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C0-... C C C C C C C C C0-...,, C0-... C0-... C0-... C0-0..., C0-..., C0-... C0-... C0-... C0-..., C0-..., CS CS CS0-... CS0-... S , S S C0-00P - Page - 0/0 00 Alamo Group Inc.

75

76 XH00/XH000 S Printed in Canada C0-00P

FLX15 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO

FLX15 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO Published: /0 FLX ROTARY CUTTERS S/N A00000 A0000 inclusive PARTS MANUAL Part No. A0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: -0 RPM & -000 RPM SECTION: 9 0 Griffin Ave. Selma, Al. 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com April, 0 BUSH HOG/ LAND MAINTENANCE

More information

320 Series Models 325, 326, 327

320 Series Models 325, 326, 327 0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and

More information

Mulching and Finishing Mowers MP and FP

Mulching and Finishing Mowers MP and FP Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)

More information

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16

LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0

More information

2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER

2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER 0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,

More information

PARTSBOOK. Hall Manufacturing, Inc E. Washington Ave., P.O. Box Drawer 5638 North Little Rock, AR (501)

PARTSBOOK. Hall Manufacturing, Inc E. Washington Ave., P.O. Box Drawer 5638 North Little Rock, AR (501) 540 RPM 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0

More information

PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.

PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,

More information

Reel Mower TRM 5138 and TRM 7192

Reel Mower TRM 5138 and TRM 7192 Reel Mower TRM and TRM Parts Manual Locke Turf 0 Highway E, Opp, Alabama () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing

More information

250P Manure Spreader

250P Manure Spreader 0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly

More information

ARCHIVE BOOK - II AG20-IV / AG14-IV ROTARY FLEX WING MOWER

ARCHIVE BOOK - II AG20-IV / AG14-IV ROTARY FLEX WING MOWER AG0-IV / AG-IV ROTARY FLEX WING MOWER ARCHIVE BOOK - II By Serial Number / Production Book = Apr. 99 s/n AG0-0300 Jun. 00 AG0-IV Model - 0' Flex Wing Rotary AG-IV Model - ' Flex Wing Rotary COMPLETE PARTS

More information

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount. HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards

More information

TT4100 Rotary Tedder

TT4100 Rotary Tedder TT0 Rotary Tedder Serial numbers 0 and higher Illustrated Parts Breakdown Page Page Tongue Assembly S/N - Tongue Assembly S/N to Page Page Page Page Page Tongue Assembly S/N to Tongue Assembly S/N + Main

More information

PARTS MANUAL SECTION. Models 295, 296, 297, 1297 ROTARY MOWER

PARTS MANUAL SECTION. Models 295, 296, 297, 1297 ROTARY MOWER 0 Series Models,,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and

More information

TT4101 Rotary Tedder

TT4101 Rotary Tedder TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N

More information

Reel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334)

Reel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334) Reel Mower TRM-0 Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing

More information

PARTS BOOK PARTS BOOK CATALOG

PARTS BOOK PARTS BOOK CATALOG PARTS BOOK PARTS BOOK CATALOG BOOM FLEXWING MOWER MOWERS HEADS ROTARY 15 CUT FLAIL DRAWBAR SAW HEAD MOUNT DITCHER DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND

More information

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14 8 FLEX WING ROTARY CUTTER Published 09/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: DM7, DM8, DM9 SECTION: 43 2501 Griffin Ave. Selma, AL 36703 (334) 872-6261 (334) 874-2700 Parts Ordering 1-800-304-2836 Fax 1-800-572-1784 www.bushhog.com

More information

TWIN ROTARY RAKE PARTS BOOK MODEL

TWIN ROTARY RAKE PARTS BOOK MODEL TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:

More information

Spearhead Multicut 460 MULTICUT th Edition - July 2015 Part No

Spearhead Multicut 460 MULTICUT th Edition - July 2015 Part No MULTICUT 460 14 th Edition - July 2015 Part No. 8999023 1 Spearhead Multicut 460 Parts Book 14 th Edition July 2015 Spearhead Machinery Ltd Green View Salford Priors Evesham Worcestershire WR11 8SW Tel:

More information

PARTS MANUAL 3510, 3510-O, SECTION ROTARY MOWER

PARTS MANUAL 3510, 3510-O, SECTION ROTARY MOWER , -O, ROTARY MOWER Published 0/ S MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained

More information

1 RS-300/D 320/D 340/D 350H Parts Manual

1 RS-300/D 320/D 340/D 350H Parts Manual 300/D 320/D 340/D 350H Parts Manual Table Of Contents Three Point Hitch / Hitch Frame Assembly... 3 Tongue Pull Hitch Assembly... 7 Main Gearbox... 11 Crank Handle & Gear... 13 Hydraulic Lift... 15 Rotor

More information

HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm

HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description

More information

ROTARY RAKE PARTS BOOK MODEL E

ROTARY RAKE PARTS BOOK MODEL E ROTARY RAKE PARTS BOOK MODEL 1150 17.00803E This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:

More information

Edition October 2014 Part No

Edition October 2014 Part No Edition 1.3 - October 2014 Part No. 8999076 1 Contents Ordering Your Parts... 3 Centre Section - S180025.70... 5 Wing Section - S180025.71/72...7 Centre Axle - S180025.110... 9 Wing Axle - S180025.111...10

More information

HT46X Rotary Tedder. Illustrated Parts Breakdown. Center Section

HT46X Rotary Tedder. Illustrated Parts Breakdown. Center Section HTX Rotary Tedder Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Center Section Hydraulics Outer Wing Assembly Center Bolted Components Tine Rotor and Hardware Tilt

More information

TT8101 Rotary Tedder

TT8101 Rotary Tedder TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel

More information

Rotary Cutter RCD P Parts Manual. Copyright 2017 Printed 07/14/17

Rotary Cutter RCD P Parts Manual. Copyright 2017 Printed 07/14/17 Rotary Cutter RCD1884 30747 326-355P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life

More information

TT6101 Rotary Tedder

TT6101 Rotary Tedder TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame

More information

2820/12820 SECTION 103. This Manual applies to Models: 2820R1, 12820R1, 12820S1 2820RR1, 12820RR1, 12820SR1 FLEX WING ROTARY CUTTER/SHREDDER

2820/12820 SECTION 103. This Manual applies to Models: 2820R1, 12820R1, 12820S1 2820RR1, 12820RR1, 12820SR1 FLEX WING ROTARY CUTTER/SHREDDER 0/0 This Manual applies to Models: 0R, 0R, 0S 0RR, 0RR, 0SR FLEX WING ROTARY CUTTER/SHREDDER Published 0/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

Spearhead. Swipe E150/E180/E210. Parts Book

Spearhead. Swipe E150/E180/E210. Parts Book Spearhead Swipe E150/E180/E210 Parts Book 1 st Edition April 2009 Please ensure that this manual is handed to the operator before using the machine for the first time. The operator must fully understand

More information

PARTS BOOK FLAIL HEADS 75 CUT 3PT HITCH SWING ARM

PARTS BOOK FLAIL HEADS 75 CUT 3PT HITCH SWING ARM PARTS BOOK FLAIL HEADS 75 CUT 3PT HITCH SWING ARM 5.0.8 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 5704 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE

More information

SA Swingaway Auger. Parts List. 431 Gosport Street Moree Phone Fax

SA Swingaway Auger. Parts List. 431 Gosport Street Moree Phone Fax SA Swingaway Auger Parts List 431 Gosport Street Moree Phone 02 67521511 Fax 02 67524685 email - andrew@grainland.com.au www.grainland.com.au SWING AWAY AUGER 1061/1071 TUBE COMPONENTS... F2 1081/1371/1381

More information

PARTS MANUAL. HD4SR and 12SR Auto Align Bale Skoop to 2017 K

PARTS MANUAL. HD4SR and 12SR Auto Align Bale Skoop to 2017 K PARTS MANUAL 1998 to 2017 HD4SR and 12SR Auto Align Bale Skoop K34991-04 Table of Contents Section 1: Parts Breakdown...1-1 Bale Skoop Final Assembly... 1-2 Loader Assembly... 1-4 12SR - Grab Hook Assembly

More information

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics

More information

PARTS MANUAL SECTION R1, 2215RR1-540 RPM 12215R1, 12215RR1-1000RPM FLEX WING ROTARY CUTTER. Published 07/16

PARTS MANUAL SECTION R1, 2215RR1-540 RPM 12215R1, 12215RR1-1000RPM FLEX WING ROTARY CUTTER. Published 07/16 225R, 225RR - 50 RPM 225R, 225RR - 000RPM FLEX WING ROTARY CUTTER Published 07/6 PARTS MANUAL SECTION 3 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of

More information

RITE WAY MFG. CO. LTD. P.O.

RITE WAY MFG. CO. LTD. P.O. CO. LTD. P.O. Box 328 Imperial, Saskatchewan Canada, S0G 2J0 Ph: (306) 963-280 Fax: (306) 963-2660 Web Site: www.ritewaymfg.com E-mail: info@ritewaymfg.com Table of Contents SPECIFICATIONS... WARNING...2

More information

3308, 3308SH PARTS MANUAL SECTION ROTARY MOWER

3308, 3308SH PARTS MANUAL SECTION ROTARY MOWER 0, 0SH ROTARY MOWER Published / PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained

More information

AG96 ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production COMPLETE PARTS LISTING. ALAMO INDUSTRIAL 1502 E. Walnut

AG96 ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production COMPLETE PARTS LISTING. ALAMO INDUSTRIAL 1502 E. Walnut AG ROTARY MOWER ARCHIVE BOOK By Serial Number / Production June June 00 () AG Model - " Cut Rotary Pull Type, Centered Pull, Std. Offset Pull, Option Lift Type, PT Centered, Std. PT Offset, Option Hyd.

More information

Highline Manufacturing TopGun 1999 Page 1 A. TABLE OF CONTENTS... 1

Highline Manufacturing TopGun 1999 Page 1 A. TABLE OF CONTENTS... 1 Highline Manufacturing TopGun 1999 Page 1 A. Table of Contents A. TABLE OF CONTENTS... 1 B. ASSEMBLY & INSTALLATIONS... 3 1. FLAIL DRUM ASSEMBLY... 3 2. FLAIL DRUM INSTALLATION... 4 3. FEED ROLLER ASSEMBLY...

More information

MidCap Rotary Rake. Illustrated Parts Breakdown

MidCap Rotary Rake. Illustrated Parts Breakdown MidCap Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Main Frame Transport Wheel Assembly Lift Arm Assembly Main

More information

ARCHIVE BOOK - I AG20-IV / AG14-IV ROTARY FLEX WING MOWER. By Serial Number / Production COMPLETE PARTS LISTING BOOK 1

ARCHIVE BOOK - I AG20-IV / AG14-IV ROTARY FLEX WING MOWER. By Serial Number / Production COMPLETE PARTS LISTING BOOK 1 AG20-IV / AG1-IV ROTARY FLEX WING MOWER ARCHIVE BOOK - I By Serial Number / Production Book 1 = Sep. 1989 s/n AG20-0100 s/n AG20-01299 AG20-IV Model - 20' Flex Wing Rotary AG1-IV Model - 1' Model (Not

More information

AG84-B ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production COMPLETE PARTS LISTING. ALAMO INDUSTRIAL 1502 E. Walnut

AG84-B ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production COMPLETE PARTS LISTING. ALAMO INDUSTRIAL 1502 E. Walnut AG8-B ROTARY MOWER ARCHIVE BOOK By Serial Number / Production April 99 May 00 () AG8-B Model - 8" Rotary Pull Type or Lift Type Option COMPLETE PARTS LISTING Archive Book Part No. 0979 ALAMO INDUSTRIAL

More information

R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header. Parts Catalog Revision C

R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header. Parts Catalog Revision C R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Parts Catalog R80 Rotary Disc Pull-Type Mower Conditioner and Self-Propelled Windrower Header Published: April, 2015 NOTE:

More information

Spearhead STARCUT 500 STARCUT 500. Edition Jan 2013 Post Serial No. S Part No

Spearhead STARCUT 500 STARCUT 500. Edition Jan 2013 Post Serial No. S Part No STARCUT 500 Edition 2.0 - Jan 2013 Post Serial No. S136498 Part No. 8999040 1 Contents Ordering Your Parts 3 Centre Section 4 Wing Section 6 Centre Axle 8 Wing Axle 10 Std Drawbar 12 Tie-Bar Assembly 14

More information

BEFCO. Parts Manual CYCLONE EZ-FLEX. Three Point Hitch Gang Grooming Mower Front or Rear Mount 112-EZFA, 115-EZFA. Manual B July 2010

BEFCO. Parts Manual CYCLONE EZ-FLEX. Three Point Hitch Gang Grooming Mower Front or Rear Mount 112-EZFA, 115-EZFA. Manual B July 2010 BEFCO Parts Manual CYCLONE EZ-FLEX Three Point Hitch Gang Grooming Mower Front or Rear Mount -EZFA, 5-EZFA Manual 97-7B July 00 BEFCO PM, 5-EZF (US) Printed on July, 00 Parts Manual EZFA- Ver. E EZFA-5

More information

McCONNEL. Publication 609 July 2009 Part No SR420 ROTARY WING MOWER. Parts Manual

McCONNEL. Publication 609 July 2009 Part No SR420 ROTARY WING MOWER. Parts Manual Publication 609 July 2009 Part No. 22674.09 SR420 ROTARY WING MOWER Parts Manual For best performance USE ONLY GENUINE SERVICE PARTS To be assured of the latest design improvements purchase your Genuine

More information

PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A

PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag

More information

BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS

BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS PARTS MANUAL BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306)

More information

Loader Backhoe Front Axle Parts 2WD & 4WD

Loader Backhoe Front Axle Parts 2WD & 4WD Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS

More information

PARTS BOOK FLAIL HEADS 75 CUT 3PT HITCH SWING ARM

PARTS BOOK FLAIL HEADS 75 CUT 3PT HITCH SWING ARM PARTS BOOK FLAIL HEADS 75 CUT 3PT HITCH SWING ARM 5.10.18 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE

More information

SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY.

SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY. SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY. 1. Wear personal protective equipment such as, but not limited to protection

More information

PARTS BOOK CATALOG 3PT HITCH MOUNT HEADS SWING FLAIL-HEAVY DUTY MOWERS

PARTS BOOK CATALOG 3PT HITCH MOUNT HEADS SWING FLAIL-HEAVY DUTY MOWERS PARTS BOOK CATALOG 3PT HITCH MOUNT HEADS SWING FLAIL-HEAVY DUTY MOWERS DIAMOND MOWERS, Inc. 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS

More information

PARTS BOOK FLAIL HEADS 90 SIDE MID-MOUNT

PARTS BOOK FLAIL HEADS 90 SIDE MID-MOUNT PARTS BOOK FLAIL HEADS 90 SIDE MID-MOUNT 5.0.8 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 5704 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR SITUATION

More information

BH200 SERIES ROTARY CUTTER

BH200 SERIES ROTARY CUTTER Revised Published01/19 BH200 SERIES ROTARY CUTTER PARTS MANUAL SECTION 121 MODELS BH215, BH216, BH217 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the

More information

BEFCO. Parts Manual CYCLONE FLEX. Tri-wing Grooming Mower 212, 215, Manual B July 2000

BEFCO. Parts Manual CYCLONE FLEX. Tri-wing Grooming Mower 212, 215, Manual B July 2000 BEFCO Parts Manual CYCLONE FLEX Tri-wing Grooming Mower, 5, 7-706 Manual 97-59B July 000 BEFCO PM, 5, 7-706 (US) Printed on December, 00 Parts Manual 07/000, 5, 7-706 FLEX SERIES MAIN FRAME OPERATOR S

More information

TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L

TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L INDEX Section L TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS TRANSPORT AUGER TUBE / UNDERCARRIAGE/ TF WHEEL MOVE L Description Page TF3, TF3, TF03, TF03 Basic Auger...L-3 TF, TF0 Basic Auger...L-

More information

Litter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown

Litter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic

More information

BALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS

BALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS PARTS MANUAL BALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX:

More information

Rotary Cutter RCF3660 & RCF P Parts Manual. Copyright 2018 Printed 07/10/18

Rotary Cutter RCF3660 & RCF P Parts Manual. Copyright 2018 Printed 07/10/18 Rotary Cutter & 30387 326-246P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and

More information

Hydrostatic Zero-Turn Commercial Riding Mower

Hydrostatic Zero-Turn Commercial Riding Mower Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated

More information

Part s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)

Part s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06) Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0

More information

BEFCO. Parts Manual CYCLONE FLEX. Tri-wing Grooming Mower Manual B July BEFCO PM (US) Printed on December 11, 2010

BEFCO. Parts Manual CYCLONE FLEX. Tri-wing Grooming Mower Manual B July BEFCO PM (US) Printed on December 11, 2010 BEFCO Parts Manual CYCLONE FLEX Tri-wing Grooming Mower 0-706 Manual 97-60B July 000 BEFCO PM 0-706 (US) Printed on December, 00 Parts Manual 07/000 0-706 FLEX SERIES MAIN FRAME OPERATOR S MANUAL 0-706

More information

Price Per Loaded Mile:

Price Per Loaded Mile: SEQ. #416-612 MINNESOTA PRICING PAGES (Typed Responses Required) JUNE, 2012 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address:

More information

Hydrostatic Zero-Turn Commercial Riding Mower

Hydrostatic Zero-Turn Commercial Riding Mower Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter

More information

1 KW-550T Parts Manual. Table Of Contents

1 KW-550T Parts Manual. Table Of Contents KW-550T Parts Manual Table Of Contents Drawbar... 2 Central Gearbox - Serial No. 523800-554988... 4 Central Gearbox - Serial No. 523800-554988... 6 Central Gearbox - Serial No. 554989-... 8 Central Gearbox

More information

1 KW-880 Parts Manual

1 KW-880 Parts Manual Headstock... 2 Hitch Beam... 4 Central Gearbox... 6 Central Gearbox... 8 Intermediate Beam... 10 Intermediate Beam... 12 Intermediate Beam Outside... 14 Intermediate Beam Outside... 16 Outer Support Tube...

More information

DEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev.

DEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev. FORM NO. 01-505-0440 Rev. D MODEL NO. 44520-20101 & UP PARTS CATALOG DEBRIS BLOWER 2613 Part 1 61-005-0073 Hitch & Lower Housing 1 2 61-005-0121 Fan Housing 1 3 61-005-0061 Fan Assembly 1 4 01-113-0070

More information

Published 10/12 SICKLE BAR BOOM MOWER PART'S MANUAL SECTION 90

Published 10/12 SICKLE BAR BOOM MOWER PART'S MANUAL SECTION 90 Published 10/12 PT5/PT5-2 POWERTRIM SICKLE BAR BOOM MOWER PART'S MANUAL SECTION 90 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase

More information

AEROTHATCH 83/SEEDER 93

AEROTHATCH 83/SEEDER 93 FORM NO. 01-505-0110 Rev. B MODEL NO. 44830-20101 & UP MODEL NO. 44831-20101 & UP MODEL NO. 44835-40162 & UP PARTS CATALOG AEROTHATCH 83/SEEDER 93 AEROTHATCH 83 - MODEL NO. 44830 & 44831 MAIN FRAME ASSEMBLY

More information

Drive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733

Drive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733 Drive End Bracket & Bearing #865089 1 06409700 1" Lock Collar 2 865733 Drive Bracket w/ Bearing 3 310037 End Drive Shaft Drive End Bracket #865733 1 03003100 Bearing 1" w/snap Ring 2 957795 Drive End Bracket

More information

25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower

25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39

More information

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine. Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,

More information

PARTS MANUAL SECTION 94

PARTS MANUAL SECTION 94 DISC MOWER Published 06/12 HMG7, HMG8, HMG9, HMG10 Disc Mower PARTS MANUAL SECTION 94 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation

More information

Operation and Parts Manual

Operation and Parts Manual Operation and Parts Manual 3-Point PTO and Hydraulic Stump Grinders Models: SC-25 and SC-25H SC-50 and SC-50H Safety Operation Maintenance Repair Troubleshooting Parts Parts SC-50 and SC-50-H Stumpbuster

More information

1 HR-301/D Parts Manual. Table Of Contents

1 HR-301/D Parts Manual. Table Of Contents Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly

More information

S MULTICUT 430. Edition 1.3 June 2016 Part No

S MULTICUT 430. Edition 1.3 June 2016 Part No S147565 MULTICUT 430 Edition 1.3 June 2016 Part No. 8999080 Contents Ordering your Parts...2 S180043.21 Centre Deck...3 S180043.22 LH Wing Deck.4 S180043.23 RH Wing Deck.5 S180043.11 Std Wheel Arm 6 S180043.25

More information

33 COMPACT DISC Ref. No. Part Name Part Number

33 COMPACT DISC Ref. No. Part Name Part Number CONTENTS CONTENTS 33 COMPACT DISC Ref. Part Name Part Number 1 Tire & Rim 168025 2 Disc Axle 401036 3 Plastic End Cap (Pkg. 2) 504090 4 Sealed Bearings & Flanges 504125 5 Bearing Stand Bolt Pkg. (2-U-Bolts)

More information

Parts Manual EZF 3417/ Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

Parts Manual EZF 3417/ Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Parts Manual EZF 3417/ 96579301 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 200 HTC. All Rights Reserved. Beatrice, NE. Printed

More information

3 X2 4 X2 9 X1 6 DETAIL A H1064XT

3 X2 4 X2 9 X1 6 DETAIL A H1064XT HXT AUGER, BASE MODEL, HXT 11 A 9 1 DETAIL A ITEM NO. PART NO. DESCRIPTION QTY 1 0 CLAMP, /" CABLE, ZINC 9 CLAMP, 1/" CABLE 1 CABLE, TRUSS, /" X 1FT, HXT 1 CABLE, WING, 1/" X 0FT, HXT PBH01 HOPPER ASM,

More information

530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B

530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 2 27602311 1 HARNESS, WIRE, Front 3 27602221 1 HARNESS, WIRE, Rear (530B) 4 27602202 2 LIGHT ASSY., Red 5

More information

BEFCO. Parts Manual CYCLONE SUPER-FLEX. Gang Grooming Mower 417-SFL, 420-SFL. Manual B November 2010

BEFCO. Parts Manual CYCLONE SUPER-FLEX. Gang Grooming Mower 417-SFL, 420-SFL. Manual B November 2010 BEFCO Parts Manual CYCLONE SUPERFLEX Gang Grooming Mower 7SFL, 0SFL Manual 96009B November 00 BEFCO PM (US) Printed on December, 00 Parts Manual /00 SFL7, 0 Ver. M CYCLONE SUPERFLEX MAIN FRAME OPERATOR

More information

PARTS MANUAL BALE KING V-RAKE VR810 GREEN AND YELLOW ITEM NUMBERS

PARTS MANUAL BALE KING V-RAKE VR810 GREEN AND YELLOW ITEM NUMBERS PARTS MANUAL BALE KING V-RAKE VR810 GREEN AND YELLOW ITEM NUMBERS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306) 745-3364 TABLE

More information

BUSH HOG 2501 Griffin Ave. Selma, AL Contact Us

BUSH HOG 2501 Griffin Ave. Selma, AL Contact Us RD5/RD6 ROTARY MOWER Published 01/11 PART'S MANUAL SECTION 88 An Operator's Manual was shipped with the equipment. The Operator's Manual is an integral part of the safe operation of this machine and must

More information

2815R3,2810R R3, 12810R3

2815R3,2810R R3, 12810R3 28R,280R 28R, 280R FLEX WING ROTARY CUTTER Published 08/ PARTS MANUAL SECTION 9B Revised 0/ An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation

More information

AG60 ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production July 1988 to January 2004 (Current) (AG60 Model - 60" Rotary) COMPLETE PARTS LISTING

AG60 ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production July 1988 to January 2004 (Current) (AG60 Model - 60 Rotary) COMPLETE PARTS LISTING AG0 ROTARY MOWER ARCHIVE BOOK By Serial Number / Production July January 00 (Current) (AG0 Model - 0" Rotary) COMPLETE PARTS LISTING Archive Book Part No. 070 ALAMO INDUSTRIAL 0 E. Walnut Seguin, Texas

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: RZ60 SECTION: 31

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: RZ60 SECTION: 31 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: RZ0 SECTION: 0 Griffin Ave. Selma, AL 0 (4) - (4) 4-00 Parts Ordering -00-04- Fax -00--4 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JANUARY

More information

BEFCO. Parts Manual CYCLONE FLEX. Gang Grooming Mower 312-FLX, 315-FLX, 317-FLX. Manual B November 2010

BEFCO. Parts Manual CYCLONE FLEX. Gang Grooming Mower 312-FLX, 315-FLX, 317-FLX. Manual B November 2010 BEFCO Parts Manual CYCLONE FLEX Gang Grooming Mower FLX, 5FLX, 7FLX Manual 9007B November 00 BEFCO PM, 5, 7FLX (US) Printed on December, 00 Parts Manual /00 FLX, 5, 7 Ver. L CYCLONE FLEX MAIN FRAME OPERATOR

More information

Part s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)

Part s Catalog. LX500 Lawn Tractor.   Model No. 13AP60RP744. Original Instructions (EN) (01/31/06) Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0

More information

MECHANICAL LEVEL LIFT ROTARY CUTTER/SHREDDER

MECHANICAL LEVEL LIFT ROTARY CUTTER/SHREDDER EAGLE 20 & 14 20 ft. & 14 ft. FLEX-WING MECHANICAL LEVEL LIFT ROTARY CUTTER/SHREDDER Published 02/06 Part No. 00779092P PART'S MANUAL An Operator's Manual was shipped with the equipment in the Manual Canister.

More information

MOBILE MIXERS PARTS MANUAL HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS. Serial number up to

MOBILE MIXERS PARTS MANUAL HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS. Serial number up to MOBILE MIXERS PARTS MANUAL 405-470 - 540 HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS Serial number up to Harsh International, Inc. 600 Oak Ave. Eaton, CO 80615-0007 (970) 454-2291 Fax: (970) 454-3491

More information

72K850ZP PARTS MANUAL

72K850ZP PARTS MANUAL 7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL

More information

BEFCO. Parts Manual CYCLONE FLEX. Gang Grooming Mower 312-FLX, 315-FLX & 317-FLX. Manual B October 2008

BEFCO. Parts Manual CYCLONE FLEX. Gang Grooming Mower 312-FLX, 315-FLX & 317-FLX. Manual B October 2008 BEFCO Parts Manual CYCLONE FLEX Gang Grooming Mower -FLX, 5-FLX & 7-FLX Manual 90-07B October 00 BEFCO PM, 5, 7-FLX (US) Printed on October, 00 Parts Manual /007 FLX-, 5, 7 Ver. L FLEX, 5 & 7 MAIN FRAME

More information