RM-RS Ø Compact cylinders ISO Further development Ø mm. Pneumatic cushioning standard. Magnetic version standard
|
|
- Peregrine Shelton
- 6 years ago
- Views:
Transcription
1 RMRS 0 0 Compact cylinders ISO Further development 00 mm Pneumatic cushioning standard Magnetic version standard Standard version according to ISO STRONG version (interaxes, centering diameters and rods according to ISO 1555)
2 RMRS 0 0 Compact cylinders according to ISO (RM Series) STRONG version oversized guides and piston rod (RS series) Cylinders with compact overall dimensions 0 0 mm ccording to ISO (RM) djustable pneumatic cushioning Single and double acting, through rod, This product, the first one realized with adjustable pneumatic cushioning without changement of dimensions in comparison with an equivalent cylinder without cushioning, allows a considerably higher speed and reduces noise level. STRONG series RS, oversize guides and rods for long strokes and heavy duty application. TECHNICL CHRCTERISTICS mbient temperature Fluid Working pressure ore Cushion 0 C compressed air, lubricated or not lubricated 1,5 bar 0 0 mm adjustable pneumatic cushioning in boths sides CONSTRUCTIVE CHRCTERISTICS End caps arrel Piston Piston guide Piston rod Piston seal Piston rod guide Rubber cushion Magnet CODIFICTION KEY R 1 M Series RM = Compact cylinder ISO RS = Compact cylinder STRONG 0 Type 0 aluminium extruded aluminium anodized aluminium acetal resin stainless steel nitril rubber acetal resin nitril rubber plastoferrite magnetic ring = Female piston rod stainless steel = Female piston rod chromiumplated = Male piston rod stainless steel = Male piston rod chromiumplated Version 00 = D.E. Standard 01 = D.E. Through rod 0 = S.E. Retracted rod 70 = S.E. Extended rod ore 00 = 0 0 = 0 5 Stroke (mm) Simple acting Double acting Option H = Hollow rod only for versions with through, without flange D.E. = Double acting S.E. = Simple acting RMRS_
3 RMRS ccessories UNIVER GROUP DESCRIPTION Compact cylinder RM series Compact cylinder RS series Female fork with clips rticulated selflubricating fork Fork with axially mounted articuled pin Fork with anglemounted articuled pin Floating joint M1x1, daptor ring UNITOP/ISO Female rear hinge with pin Counter hinge 0 (CETOP) Counter hinge a 0 Counter hinge 0 (CNOMO) Narrow female hinge with clips Male rear hinge (MP) Narrow male articuled hige Front (MP1) rear (MP) flange racket (MS1) Front rear hinge rticuled counterhinge 0 DIN Support for intermediate hinge Intermediate hinge Magnetic sensor Cable clamping Strip cover Slide units J series Locking units L1N series NOTES aluminium polycarbonate NR PRT NO. KF1500 KF00 KF0 KF00 KF00 RS000/RS00 KF00/KF0 KF100CT/KF10CT KF100/KF10 KF100CN/KF10CN KF00S/KF0S KF10/KF110 KF10S/KF110S KF/KF10 KF100/KF10 KF00P/KF0P KF100SC/KF10SC KF0/KF10 KDF00/KDF0 DF DF001 DF000 J (only RS) L1N00/L1N0 (only RS) RMRS_
4 RMRS Double acting / single acting retracted piston rod / single acting extended piston rod UNIVER GROUP RM > Double acting/simple acting retracted piston > Extended piston rod 0 0 F G DF DT D1 E EE KF KK H11 1,5 1,5 1, 1,,5 11 G1/ G1/ M1 M1 L M1x1,5 M1x1,5 TG LK LW MM PL P1 RR RT SW WH Z Z KV KW 0 0,, RS,5,, M M > Double acting/simple acting retracted piston > Extended piston rod F G DF DT D1 E EE KF KK KV KW L ,5 1,5 1, 1, H11,5 11 G1/ G1/ M1 M1 Mx1,5 Mx1,5 VD LK LW L MM PL P1 RR RT SW TG WH Z Z 0 0,, 0 0,5,5,5,, M M djusting screw pneumatic cushioning Mounting sensor Z = stroke RMRS_ 1_
5 RMRS Double acting through piston rod UNIVER GROUP RM F G DF DT E EE KF KK KV KW 0 0 1,5 1,5 1, 1,,5 11 G1/ G1/ M1 M1 M1x1,5 M1x1,5 L LK LW MM PL RR RT SW TG WH Z ZM 0 0,,,5,, M M RS F G DF DT D1 E EE KF KK KV KW L ,5 1,5 1, 1, H11,5 11 G1/ G1/ M1 M1 MX1,5 MX1,5 LK LW L MM PL P1 RR RT SW TG VD WH Z ZM 0 0,, 0 0,5,5,5,, M M > Hollow through piston rod Female Male 0 0 D djusting screw pneumatic cushioning Mounting sensor Z = stroke RMRS_5 1_5
6 UNIVER S.p.. Headquarter I 1 Milano Via Eraclito, 1 Tel Fax info@univergroup.com UNIVER SERVICE S.r.l. Headquarter I 1 Milano Via Empedocle, Tel Fax universervice@universervice.it UNIVER CUNEO S.r.l. 0 Cervere (CN) Via dell viazione s.n. Tel / Fax ranch Office: LOMRDI/VENETO I 1 Milano Via Empedocle, Tel Fax universervice@universervice.it I 00 Castelli Calepio ergamo Via C. Curotti, 1/ Tel Fax castellicalepio@universervice.it PIEMONTE/LIGURI/VLLE D OST I 071 orgaro Torinese Torino Via Veneto, 1 Tel Fax torino@universervice.it EMILI ROMGN/TOSCN/MRCHE I 00 Zola Predosa ologna Via Guido Rossa, 1 Tel Fax bologna@universervice.it CENTRO/SUD I 00 Zola Predosa ologna Via Guido Rossa, 1 Tel Fax bologna@universervice.it UNIVER Pty Ltd USTRLI 5 Victoria Nicole Way Dandenong, 11 Tel Fax sales@univer.net.au UNIVER G.m.b.H. GERMNY 55 Niederkassel Marktstraße 1 Tel Fax info@univergmbh.de UNIVER Manufacturing Company Ltd. UNITED KINGDOM radford Station Road West Yorkshire DSF Tel Fax enquiries@univer.co.uk UNIVER do rasil S/ RSIL 055 São José dos Pinhais Paraná v. Rui arbosa, 005 Tel Fax univerbrasil@univer.com.br UNIVER S.L. System Supplier Pneumatic SPIN 0 arbera Del Valles arcelona Ronda Industria, Tel Fax univer@univerweb.com UNIVER M. VIOL POLND 00 ielskoiala UI. Zywiecka, 15 Tel. + 55/+ 0 Fax pneumatyka@univer.pl UNIVER reserves the right to modify the technical characteristics without prior notice UNIVER OY FINLND 150 Lahti Hirsimetsäntie, Tel Fax sales@univer.fi UNIVER SWEDEN SWEDEN 1 Stenkullen Hedeforsvägen, Tel Fax info@univer.se Distributors Worldwide: RGENTIN USTRI ELGIUM CND CHIN CÔTE D IVOIRE CYPRUS CZECH REPULIC DENMRK ECUDOR EGYPT GREECE HOLLND HUNGRY INDI INDONESIN IRELND ISREL LITHUNI MLYSI MOROCCO NEW ZELND PKISTN PERU PORTUGL SUDI RI / KUWIT / QTR UNIVER FRNCE S.a.s. FRNCE 000 Colmar 1, rue Denis Papin Tel Fax info@univerfrance.fr UNIVER G SWITZERLND 1 Steinhausen Postfach Sumpfstrasse, Tel Fax mail@univerag.ch SERIN REPULIC ROMNI SLOVENI SOUTH FRIC SOUTH KORE SYRI TIWN THILND TUNISI TURKEY US UNITED R EMIRTES / OMN / YEMEN NW_1_EN_07/11 Rev.00_07/11
Pneumatik Allt för Ett Bra Grepp
Pneumatik Allt för Ett Bra Grepp Pneumatic Automation Automotive www.univ er g r oup. c o m www.pivac.se 0 09 00 www.pivacsyd.se 000 0 Ett Bra Grepp! BUSINESS PROFILE PRODUCT HISTORY PNEUMATIC PRODUCT
More informationProduct range. Automotive_ Pneumatic power clamps Electric power clamps Pneumatic components for Automotive
Product range Pneumatic Automation_ Cylinders High-Tech Valves Air treatment Accessories Automotive_ Pneumatic power clamps Electric power clamps Pneumatic components for Automotive UNIVER Headquarter
More informationESSENTIAL. Valves. EL series. 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION
ESSENTIAL Valves EL series 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION ESSENTIAL Valves EL series 18 mm (G1/8) 22 mm (G1/4) HIGH FLOW RATE 800 Nl/min (G1/8) 1700 Nl/min (G1/4) REDUCED DIMENSIONS 18
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationRT2 RT3. ORIGINAL UNIVER Original design and technology. INDUSTRIALIZED Industrialized components and advanced technology
RT Telescopic cylinders RT2 2 stages 25 mm ORIGINAL UNIVER Original design and technology INDUSTRIALIZED Industrialized components and advanced technology REDUCED DIMENSIONS 60% less than standard cylinders
More informationTECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
More informationPage Product family Series Microcylinders 8 mm according to ISO 64 standard M mm according to ISO 6431 / VDMA 24562 standard K KD - 19 High-Tech Rotating pneumatic cylinders 1 mm R - Compact cylinders
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationMass Flow Meter Model: MAS. Design
Mass Flow Meter and Controller for Gases measuring monitoring analysing MS / MFC OMeasuring O range: 0-10 Nml/min... 0-500 Nl/min O O ccuracy: ±1.5% f.s. OO p max 35 bar; t max 50 C Onalogue O output:
More informationAUTOMOTIVE DIVISION YEARS. Car Manufacturers which use our Clamps. Since 1971 leader in Industrial Automation
Since 1971 leader in Industrial Automation 30 YEARS AUTOMOTIVE DIVISION Car Manufacturers which use our Clamps Pneumatic Automation Automotive www.univer-group.com A single supplier with a complete Pneumatic
More informationCylinders Z K KD R RP RO RS RQ new. new. new. new. new. Product family Series Page
Product family Series Page Microcylinders 8 25 mm according to ISO 6432 Microcylinders with non-rotating rod 16 25 mm according to ISO 6432 standard 32 200 mm according to ISO 6431 / VDMA 24562 with non-rotating
More informationAUTOMOTIVE POWER CLAMPS PIN UNITS PIN CLAMPS GRIPPER UNITS POWER PIVOTS MARKING UNITS ELECTRIC UNITS
Industrial Automation PNEUMATIC AUTOMATION CYLINDERS HIGH-TECH VALVES AIR TREATMENT ACCESSORIES AUTOMOTIVE POWER CLAMPS PIN UNITS PIN CLAMPS GRIPPER UNITS POWER PIVOTS MARKING UNITS ELECTRIC UNITS MODULAR
More informationStandards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationCylinders ISO Bores from 32 to 125 mm
Cylinders ISO 5552 ores from 32 to 25 mm Double acting Standard executions Version Profile Tube Symbol Type STANDARD MAGNETIC AMA AMT For the magnetic reed switches type ASV and ASC see from page.0.. For
More informationSHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationQuick Release Couplings Series UX
Maximum Volumetric Flow The coupling series UX exceeds the requirements of ISO 71-1 series and ISO 67 for the agricultural sector and is uncompromisingly designed for maximum efficiency. bar / MPa / 36
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationCylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
More informationShort-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
More informationStandards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationTie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationStandards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:
Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationUCC Series Co-Axial Drive Pneuma-Hydraulic
UCC Series Co-Axial Drive Pneuma-Hydraulic 40mm - 200mm bore sizes Features Co-Axial Drives (UCC) consist of two integral elements; a pneumatic drive unit to provide power and an integrated, closed circuit
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationShort-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationPneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationRA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationStainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationAvailable: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
More informationAUTOMOTIVE POWER CLAMPS PIN UNITS PIN CLAMPS GRIPPER UNITS POWER PIVOTS MARKING UNITS ELECTRIC UNITS
Industrial Automation PNEUMATIC AUTOMATION CYLINDERS HIGH-TECH VALVES AIR TREATMENT ACCESSORIES AUTOMOTIVE POWER CLAMPS PIN UNITS PIN CLAMPS GRIPPER UNITS POWER PIVOTS MARKING UNITS ELECTRIC UNITS MODULAR
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationCompact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
More informationLRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More informationConstruction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston
Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C3 chromed steel or stainless steel aluminium alloy anodised spheroid bronze
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationStandards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Piston rod cylinders Short-stroke and compact cylinders 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C Medium temperature min./max. -20 C /
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationPRA/182000, PRA/182000/M ISO/VDMA Profile cylinders
P/182000, P/182000/M IO/VDM Profile cylinders onforms to IO 15552, IO 6431, VDM 24562 and NFE 49-003-1 Profile barrel with concealed tie rods High performance, stability and reliability Polyurethane seals
More informationStrokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
More informationStrokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
More information12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
More informationTie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
More informationSeries CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
More informationCYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationCompact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationANTI-CORROSIVE CYLINDERS WITH TIE RODS Ø 32 to 125 mm - double acting - ISO with adjustable pneumatic cushioning
ANTI-CORROSIVE CYLINDERS WITH TIE RODS 32 to 125 mm - double acting - ISO 15552 with adjustable pneumatic cushioning NS Series S FEATURES The cylinders are designed for use in corrosive environments: chemical,
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationLRM/55401/M, Roundline cylinder Magnetic piston, double acting
LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and
More informationPRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
More informationRA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
More information1/96 N Our policy is one of continued research and development. We therefore reserve the right
Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationSUMMARY KIT PNEUMATIC MOTION
SUMMARY G1 P CONFIGURABLE (KIT PMC) G1.2 P READY (KIT PMR) G1.3 P CUSTOM G1.9 SUMMARY G1.1 CONFIGURABLE (KIT PMC) An on-line configurator is provided for the ease-and-quick selection of the cylinder, the
More informationFULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
More informationVia Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P Pistoia Tel.0573/ Fax 0573/
TECHNICAL AND DIMENSIONAL CATALOGUE EDITION N 1-04 Via Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P.51034 Pistoia Tel.0573/929163 Fax 0573/929190 E-mail: info@oleodinamicasabatini.it CAT-2004-I.doc
More informationHinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More information1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationStainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
More information