Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
|
|
|
- Rosamund Robbins
- 5 years ago
- Views:
Transcription
1 Piston rod cylinders Short-stroke and compact cylinders 1 Standards NFE Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C Medium temperature min./max. -20 C / +80 C Medium Compressed air Max. particle size 50 µm Oil content of compressed air 0 mg/m³ - 5 mg/m³ Pressure for determining piston forces 6,3 bar a32 Materials: Cylinder tube Piston rod Front cover End cover Front plate Aluminum, anodized Stainless steel Aluminum Aluminum Aluminum Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS, see chapter Technical information. The material for heat-resistant scraper and seal variants (ambient temperature: -10 C/120 C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. Piston Ø [mm] Retracting piston force [N] Extracting piston force [N] Impact energy [J] Stroke max. [mm] Working pressure min./max. [bar] Scraper material Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Sealing material Nitrile butadiene rubber Nitrile butadiene rubber Nitrile butadiene rubber Polyurethane Polyurethane Piston Ø [mm] Retracting piston force [N] Extracting piston force [N] Impact energy [J] Stroke max. [mm] Working pressure min./max. [bar] Scraper material Polyurethane Polyurethane Polyurethane Polyurethane Sealing material Polyurethane Polyurethane Polyurethane Polyurethane
2 2 Piston rod cylinders Short-stroke and compact cylinders Piston Ø Ports 16 M5 20 M5 25 M Stroke Piston Ø Ports Stroke Configurable product This product is configurable. Please use our Internet configurator at or contact the nearest AVENTICS sales office.
![Piston rod cylinders Short-stroke and compact cylinders 3 Maximum permissible lateral force, Static Fstat [N] 150 00125745 100 F stat.](/docs-images/80/82442950/images/3-0.jpg "= static lateral force X = spacing between force application point and cylinder cover 50 50 100 150 S + X [mm] 100 80 63 50 32/40 25 20 16 00119757 Maximum permissible lateral force, Dynamic 00125746")
3 Piston rod cylinders Short-stroke and compact cylinders 3 Maximum permissible lateral force, Static Fstat [N] F stat. = static lateral force X = spacing between force application point and cylinder cover S + X [mm] / Maximum permissible lateral force, Dynamic F dyn. = dynamic lateral force X = spacing between force application point and cylinder cover
4 4 Piston rod cylinders Short-stroke and compact cylinders Max. permissible torque M X M = max. permissible torque X = spacing between force application point and cylinder cover
5 Piston rod cylinders Short-stroke and compact cylinders 5 Dimensions E BG BG G LB LB BC LM RR RT DG LJ ØDA E G TG DT FA FB EE LA PL PL FA WH ZA+S ZB+S ZB+S WH+S TG T 3,65 ±0,15 6,85 ±0,15 5,35 ±0,15 KF MM LJ AF X2 X3 X3 X T = View for sensor groove without guide plate Piston Ø AF 1) BC BG 1) DA H11 DG H13 DT H13 E EE FA ±0,1 FB G KF M M M M M M6 10: S<3 mm 2) : S<3 mm 2) M M M6
6 6 Piston rod cylinders Short-stroke and compact cylinders Piston Ø AF 1) BC BG 1) DA H11 DG H13 DT H13 E EE FA ±0,1 FB G KF M M M M M M10 12: S<4 mm 2) M M10 12: S<4 mm 2) M M12 15: S<3 mm 2) : S<5 mm 2) M M16 Piston Ø LA LB LJ LM MM PL Ø RR RT TG WH X2 X3 f M4 18 ±0, M5 22 ±0, M5 26 ±0, M6 32 ±0, M6 42 ±0, M8 50 ±0, M8 62 ±0, M10 82 ±0, M ±0, Piston Ø ZA +S ZB +S ,5 0/+1, /+1, ,5 0/+1, /+1, /+1, /+1, / / /+2 1) Min. 2) Option: through piston rod
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:
Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient
Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.
Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane
Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston
Max. particle size 5 µm. Pressure for determining piston forces. Materials:
Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³
ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
Max. particle size 5 µm. Pressure for determining piston forces. Materials:
1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining
VERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
RT2 RT3. ORIGINAL UNIVER Original design and technology. INDUSTRIALIZED Industrialized components and advanced technology
RT Telescopic cylinders RT2 2 stages 25 mm ORIGINAL UNIVER Original design and technology INDUSTRIALIZED Industrialized components and advanced technology REDUCED DIMENSIONS 60% less than standard cylinders
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
Rodless cylinders Rodless cylinders Series RTC. Brochure
Series RTC Brochure Bosch Rexroth AG Pneumatics Series RTC Rodless cylinder, Series RTC-BV Ø 16-80 mm; double-acting; with magnetic piston; integrated guide; Basic Version; cushioning: pneumatic, adjustable
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
Ejector, Series EBS Thread connection pneumatic control, T-design with silencer
Type Ejector Ambient temperature min./max. +0 C / + C Medium temperature min./max. +0 C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
Flow and check valves Logic valves Logic valves (AND/OR) Brochure
Flow and check valves Logic valves Brochure 2 Flow and check valves Logic valves Shuttle valve (OR) Qn = 80 l/min Plate valve with pipe connection Compressed air connection input: Ø 4 compressed air connection
Max. particle size 50 µm Max. oil content of compressed air
1 Version Poppet valve Control Analog Certificates CE declaration of conformity Ambient temperature min./max. +0 C / +70 C Medium temperature min./max. +0 C / +70 C Medium Compressed air Max. particle
compact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
Ejector, Series EBS push-in fitting electrical control, T-design with release valve with silencer
Type Ejector Ambient temperature min./max. + C / + C Medium temperature min./max. + C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
Linear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
Max. oil content of compressed air
1 Version Control Certificates Ambient temperature min./max. Medium temperature min./max. Medium Poppet valve Analog CE declaration of conformity +32 F / +15 F +32 F / +15 F Compressed air 0012533 Max.
E/P pressure regulator, Series ED07 Qn= 1300 l/min Electr. connection: via signal connection Signal connection: input and output, Plug, M12, 5-pin
Pressure regulators E/P pressure regulators E/P pressure regulator, Series ED7 Qn= l/min Electr. connection: via signal connection Signal connection: input and output, Plug, M, Version Poppet valve Control
Compact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
Pressure regulators E/P pressure regulators Series ED02. Brochure
Pressure regulators E/P pressure regulators Series ED0 Brochure Pressure regulators E/P pressure regulators Series ED0 E/P pressure regulator, Series ED0 Qn= 10 l/min compressed air connection output:
ISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
Cylinders ISO Bores from 32 to 125 mm
Cylinders ISO 5552 ores from 32 to 25 mm Double acting Standard executions Version Profile Tube Symbol Type STANDARD MAGNETIC AMA AMT For the magnetic reed switches type ASV and ASC see from page.0.. For
Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
AIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
Max. particle size 50 µm
00123883 Version Poppet ale Control Analog Certificates CE declaration of conformity Ambient temperature min./max. +0 C / +50 C Medium temperature min./max. +0 C / +50 C Medium Compressed air Max. particle
Pressure regulators E/P pressure regulators Series EV07. Brochure
Pressure regulators E/P pressure regulators Series EV07 Brochure 2 Pressure regulators E/P pressure regulators Series EV07 Qn= 800 l/min Compressed air connection output: G 1/4 Electr. connection: Plug,
5/2-way valve, Series ST Qn= 280 l/min pipe connection compressed air connection output: G 1/8 with spring return
00108065 Version Spool valve not lockable Sealing principle metal/metal sealing Working pressure min./max. -0.95 bar / 10 bar Ambient temperature min./max. -15 C / +80 C Medium temperature min./max. -15
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
Flow and check valves Logic valves Pneumatic counters. Brochure
Flow and check valves Logic valves Pneumatic counters Brochure 2 Flow and check valves Logic valves Pneumatic counters Pneumatic presetting counter (add) 5-digit, digits Compressed air connection input:
RexMover Series 277 & 297 Rodless Shuttle Cylinder
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RexMover Series 277 & 297 Rodless Shuttle Cylinder Catalog pages
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
Directional valves Mechanically operated Series CD07. Brochure
Series CD07 InduParts Pneumatics B.V.B.A. Sint-Jorisstraat 40 B-8800 ROESELARE BELGIUM Tel. + (0)5 58 88 Fax. + (0)5 58 98 info@induparts.com www.induparts.com Brochure Bosch Rexroth AG Pneumatics Series
Compact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
Cylinders Z K KD R RP RO RS RQ new. new. new. new. new. Product family Series Page
Product family Series Page Microcylinders 8 25 mm according to ISO 6432 Microcylinders with non-rotating rod 16 25 mm according to ISO 6432 standard 32 200 mm according to ISO 6431 / VDMA 24562 with non-rotating
Parallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
Directional valves Pneumatically operated, according to standard ISO , 18 mm, CD02-AL series. Brochure
Directional valves Pneumatically operated, according to standard Brochure 2 Directional valves Pneumatically operated, according to standard 5/2-directional valve, Series CD02-AL Qn = 450 l/min plate connection
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.
series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500
Pressure regulators E/P pressure regulators Series ED05. Brochure
Series ED05 Brochure Series ED05 Qn= 000 l/min Compressed air connection output: G /4 Electr. connection: via signal connection Signal connection: input and output, Plug, M, 5-pin 4 Qn= 000 l/min Compressed
CYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
Page Product family Series Microcylinders 8 mm according to ISO 64 standard M mm according to ISO 6431 / VDMA 24562 standard K KD - 19 High-Tech Rotating pneumatic cylinders 1 mm R - Compact cylinders
Pressure regulators E/P pressure regulators Series EV04. Brochure
Pressure regulators E/P pressure regulators Brochure Pressure regulators E/P pressure regulators E/P pressure regulator, Qn= 50 l/min Compressed air connection output: G /8 Electr. connection: Plug, EN
Stainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
Standard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
Directional valves Pneumatically operated Series 740. Brochure
Series 740 Brochure Bosch Rexroth AG Pneumatics Series 740 Accessories 5/2-way valve, Series 740 Qn = 700-950 l/min pipe connection compressed air connection output: Ø 8x1 - Ø 10x1 Can be assembled into
Standard cylinders DNC, ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290) The modern design and construction
ACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
Directional valves Mechanically operated Series AP - inch. Brochure
Directional valves Mechanically operated Brochure 2 Directional valves Mechanically operated Qn= 150-250 l/min pipe connection compressed air connection output: 1/8-27 NPTF 3 Actuating controls for AP/ST
Rotary actuators Rack-and-pinion gears series TRR. Brochure
series TRR Brochure 2 Bosch Rexroth AG Pneumatics series TRR Rotary cylinder, Series TRR angle of rotation: 0-60 Ø2-00 mm with magnetic piston double piston with rack cushioning: pneumatically, adjustable
Pneumatic cylinders Compact cylinders Series P1J
Pneumatic cylinders Series P1J Catalogue 9127007282GB-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction
Directional valves Mechanically operated Series AP. Brochure
Series AP InduParts Pneumatics B.V.B.A. Sint-Jorisstraat 40 B-8800 ROESELARE BELGIUM Tel. +31 (0)51 22 58 88 Fax. +31 (0)51 22 58 98 info@induparts.com www.induparts.com Brochure Bosch Rexroth AG Pneumatics
Standard cylinders DDPC, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Sensor technologies Pressure sensors Operating pressure: - - 2 bar electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Operating pressure: -4.5-74 psi electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display Units displayed Switching logic Ambient
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
Profile cylinders Euromec, Series 168
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Profile cylinders Euromec, Series 68 Technical data Profile cylinders Euromec, Series 68 Double-acting,
Preparation of compressed air Supplementary products Pressure gauge. Brochure
Preparation of compressed air Pressure gauge Brochure 2 Preparation of compressed air Pressure gauge Pressure gauge, Series P1-SNL Front port Background color: Scale color: reen / White Viewing window:
PRA/182000, PRA/182000/M ISO/VDMA Profile cylinders
P/182000, P/182000/M IO/VDM Profile cylinders onforms to IO 15552, IO 6431, VDM 24562 and NFE 49-003-1 Profile barrel with concealed tie rods High performance, stability and reliability Polyurethane seals
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
ISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,
Valve terminal systems Valve terminal systems Series TC15. Brochure
Series TC15 Brochure Bosch Rexroth AG Pneumatics Series TC15 Valve terminal systems Valve terminal system, Series TC15 Qn max. = 1500 l/min; single plug-in wiring; Electr. connection: plug, form C / Plug
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
Pneumatic cylinders Series P1J Compact cylinders. Catalogue PDE2561TCUK-ul December 2006
Pneumatic cylinders Series P1J Compact cylinders Catalogue PDE261TCUK-ul December 26 PDE261TCUK-ul Features Air Hydraulic Electro cylinder cylinder mechanical actuators Overload safe *** *** * Easy to
ACT-72. DA/8000 Double acting Ø mm
ISO/VDMA Cylinders DA/8000 Double acting Ø 32... 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:
Rodless cylinders. Standard magnetic version. High reliability and long lifetime. Low friction and good resistance to loads
Rodless cylinders Standard magnetic version High reliability and long lifetime Low friction and good resistance to loads Installation in any position Mounting elements and switches can be ordered separately
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Stopper cylinders DFSP
Key features At a glance Versions: Trunnion Trunnion with female thread Roller Single-acting, pulling Double-acting with spring, pulling Double-acting without spring With or without protection against
Standard cylinders DNCI, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DNCI Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
Multi-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
PRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
Sensor technologies Pressure sensors Series PE5. Brochure
Sensor technologies Pressure sensors Series PE5 Brochure 2 Sensor technologies Pressure sensors Series PE5 Operating pressure: -4.5-74 electronic Output signal digital: 2 outputs - output IO-Link electr.
SHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards