EDITION 11/08 - English

Transcription

1 Cover_GB.fh :11 Uhr Seite 1 s.p.. Corso Trento, 2/A I ALA (TN) / ITALY Phone Fx we e-mil info@ninz.it /2-11/08-C10 EDITION 11/08 - English

2 Cover_GB.fh :11 Uhr Seite 2 GENERAL INDEX PAGE GENERAL INDEX 01 COMPANY INTRODUCTION 02 UNIVER DOORS EI 2 30 EI 2 60 REI 60 REI PROGET DOORS MULTIPURPOSE REI 60 REI MULTIPURPOSE DOORS REVER HINGED DOORS - VERTICAL SLIDING DOORS - SLIDING DOORS REI 120 REI GLAZED DOORS GLAZED FIXED WINDOWS REI 30 REI 60 REI 90 REI Ninz compny mintins the right to introduce technicl modifictions ny time without notice. All dimensions expressed in mm. 01

3 002_GB.fh :05 Uhr Seite 1 COMPANY INTRODUCTION NINZ FIREDOORS hve een engged in the mnufcturing nd sle of firedoors for oth domestic nd interntionl mrkets since Prticulr ttention is pid to respecting ll norms currently in force. The comintion of the compny s reserch progrmme nd continuous fireresistnce tests in the testing ovens ensures the consistently high qulity stndrd of the products. The NINZ certifictes conform to the new UNI 9723 stndrd. The wide product rnge nd ove ll the lrge dimensions of the test models, comine to give enormous design flexiility within the size limits imposed y the UNI 9723 norm. The gret flexiility of the mchinery nd of the computer-controlled equipment llow for the speedy mnufcturing of REI 60 nd REI 120 firedoors s well s multipurpose doors in oth single-lef nd doulelef versions. Mny doors re ville in stndrd sizes or specil sizes, with considerle colour rnge to choose from. All mnufcturing processes, from the initil cutting of the sheet metl, to the pinting nd ttention to the most minute detils, re crried out in the fcilities locted in Bolzno (BZ) nd Al (TN). 02

4 _GB.fh :31 Uhr Seite 1 03

5 _GB.fh :31 Uhr Seite 2 UNIVER DOORS INDEX UNIVER DOORS EI EI 2 60 REI 60 - REI 120 PAGE UNIVER DOORS INDEX 04 ILLUSTRATIONS UNIVER DOORS MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS EI MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS EI MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS EI MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS REI MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS REI MODELS/CERTIFICATES UNIVER SINGLE-LEAF DOORS REI MODELS/CERTIFICATES UNIVER DOUBLE-LEAF DOORS REI SPECIFICATIONS/SECTIONS UNIVER EI 2 30 SINGLE-LEAF DOORS 14 SPECIFICATIONS/SECTIONS UNIVER EI 2 60 SINGLE-LEAF DOORS 15 SPECIFICATIONS/SECTIONS UNIVER EI 2 60 DOUBLE-LEAF DOORS 16 SPECIFICATIONS/SECTIONS UNIVER REI 60 SINGLE-LEAF DOORS 17 SPECIFICATIONS/SECTIONS UNIVER REI 60 DOUBLE-LEAF DOORS 18 SPECIFICATIONS/SECTIONS UNIVER REI 120 SINGLE-LEAF DOORS 19 SPECIFICATIONS/SECTIONS UNIVER REI 120 DOUBLE-LEAF DOORS 20 DIMENSIONS UNIVER SINGLE-LEAF DOORS DIMENSIONS UNIVER DOUBLE-LEAF DOORS POSITIONS OF BRACKETS/ENCUMBRANCES UNIVER DOORS 25 ENCUMBRANCES/GLASS PANELS UNIVER DOORS 26 ACCESSORIES UNIVER DOORS SURFACE FINISHING UNIVER DOORS 29 Ninz compny mintins the right to introduce technicl modifictions ny time without notice. All dimensions expressed in mm. Fire rek doors re normlly instlled to comprtmentlize the inside of uildings nd re uilt for tht purpose. 04

6 _GB.fh :31 Uhr Seite 3 ILLUSTRATIONS Univer doors Versions EI2 30 single lef doors Versions EI2 60 / SM / C5 single nd doulelef doors Versions REI 60 / REI 120 single nd doule-lef doors Reversile SX or DX Immedite delivery from stock Fix with nchors or expnsion screws Adjustle hinges With or without ottom frme Frme including cover profile lso on the trverse Preprtion for fittings Opening right (DX) single-lef door Opening right (DX) doule-lef door Secondry lef Min lef Opening left (SX) single-lef door Opening left (SX) doule-lef door Min lef Secondry lef 05

7 _GB.fh :31 Uhr Seite 4 ILLUSTRATIONS Univer doors Removle cover profile to e lid on finished floor. Brckets to fix with mortr. Preprtion for fixing with expnsion screws. Hinge with self-closing spring. Bll-ering hinge with screws for the verticl djustment. Bottom-prt frme, removle. Without frme t floor. Blck sfety hndle set steel core. Pcked individully in nylon on pllets. 06

8 _GB.fh :31 Uhr Seite 5 Versions Wll opening MODELS/CERTIFICATES Univer EI 2 30 single-lef doors Notes / Glss pnel dimensions Certifictes / Government pprovl L = H = with BRACKETS EI 2 30 CSI1250FR (UNI EN 1634) Univer EI 2 60 single-lef doors Versions Wll opening Notes / Glss pnel dimensions Certifictes / Government pprovl L = H = with BRACKETS or EXPANSION SCREWS EI 2 60 IFT IFT L = H = L = H = with BRACKETS or EXPANSION SCREWS L = 250 H = 400 minimum 250 minimum 300 with BRACKETS or EXPANSION SCREWS L = 300 H = 400 minimum 250 minimum 300 EI 2 60 IFT IFT EI 2 60 IFT IFT Ø300 L = H = Ø400 L = H = with BRACKETS or EXPANSION SCREWS EI 2 60 dim. = 300 dim. = 400 minimum 220 minimum 300 IFT IFT

9 _GB.fh :31 Uhr Seite 6 MODELS/CERTIFICATES Univer EI 2 60 doule-lef doors Versions Wll opening Notes / Glss pnel dimensions Certifictes / Government pprovl L = 1000 (L L2 500) (L L2 1000) H = with BRACKETS or EXPANSION SCREWS EI 2 60 IFT IFT * = min lef * = min lef * = min lef * * * L = 1700 (L L2 850) (L L2 1000) H = L = 1350 (L L2 500) (L L2 1000) H = L = 1800 (L L2 900) (L L2 1000) H = L = 1400 (L L2 500) (L L2 1000) H = Ø300 L = 1480 (L L2 1740) - L = 2000 (L L2 1000) - H = Ø400 L = 1680 (L L2 840) - H = Ø300 L = 1240 (L L2 1500) - L = 2000 (L L2 1000) - H = Ø400 L = 1340 (L L2 1500) - L = 2000 (L L2 1000) - H = with BRACKETS or EXPANSION SCREWS L = 250 H = 400 minimum 300 minimum 300 with BRACKETS or EXPANSION SCREWS L = 250 H = 400 minimum 300 minimum 300 with BRACKETS or EXPANSION SCREWS L = 300 H = 400 minimum 300 minimum 300 with BRACKETS or EXPANSION SCREWS L = 300 H = 400 minimum 300 minimum 300 with BRACKETS or EXPANSION SCREWS dim. = 300 dim. = 400 minimum 220 minimum 300 with BRACKETS or EXPANSION SCREWS dim. = 300 dim. = 400 minimum 220 minimum 300 EI 2 60 IFT IFT EI 2 60 IFT IFT EI 2 60 IFT IFT EI 2 60 IFT IFT EI 2 60 IFT IFT EI 2 60 IFT IFT

10 _GB.fh :31 Uhr Seite 7 MODELS/CERTIFICATES Versions Wll opening L = H = L = H = L = H = Univer REI 60 single-lef doors Notes / Glss pnel dimensions with BRACKETS or EXPANSION SCREWS with BRACKETS or EXPANSION SCREWS Certifictes / Government pprovl REI 60 I.G /1812RF I.G /1813RF BZ050REI060P022F2 REI 60 CSI0750RF CSI0751RF BZ050REI060P024F2 L = H = L = H = L = H = with EXPANSION SCREWS L = 250 H = 400 minimum 300 minimum 300 with EXPANSION SCREWS L = 300 H = 400 REI 60 CSI1181FR BZ050REI060P028E1 REI 60 CSI1181FR minimum 300 minimum 300 BZ050REI060P028E1 L = H = with EXPANSION SCREWS dim. = 300 REI 60 CSI1181FR L = H = minimum 220 minimum 300 BZ050REI060P028E1 09

11 _GB.fh :31 Uhr Seite 8 MODELS/CERTIFICATES Univer REI 60 doule-lef doors Versions Wll opening L = 940 (L L2 400) (L L2 1000) H = Notes / Glss pnel dimensions with EXPANSION SCREWS Certifictes / Government pprovl REI 60 CSI1181FR L = 1700 (L L2 850) (L L2 1000) H = with EXPANSION SCREWS L = 250 H = 400 BZ050REI060P028E1 REI 60 CSI1181FR * = min lef * L = 1250 (L L2 400) (L L2 1000) H = L = 1800 (L L2 900) (L L2 1000) H = minimum 300 minimum 300 with EXPANSION SCREWS L = 250 H = 400 minimum 300 minimum 300 with EXPANSION SCREWS L = 300 H = 400 BZ050REI060P028E1 REI 60 CSI1181FR BZ050REI060P028E1 REI 60 CSI1181FR * = min lef * L = 1300 (L L2 400) (L L2 1000) H = L = 1480 (L L2 740) (L L2 1000) H = minimum 300 minimum 300 with EXPANSION SCREWS L = 300 H = 400 minimum 300 minimum 300 with EXPANSION SCREWS dim. = 300 BZ050REI060P028E1 REI 60 CSI1181FR BZ050REI060P028E1 REI 60 CSI1181FR L = 1140 (L L2 400) (L L2 1000) H = minimum 220 minimum 300 with EXPANSION SCREWS dim. = 300 BZ050REI060P028E1 REI 60 CSI1181FR * = min lef * minimum 220 minimum 300 BZ050REI060P028E1 10

12 _GB.fh :31 Uhr Seite 9 MODELS/CERTIFICATES Univer REI 120 single-lef doors Versions Wll opening Notes / Glss pnel dimensions Certifictes / Government pprovl L = H = L = H = with BRACKETS or EXPANSION SCREWS REI 120 CSI0735RF CSI0739RF BZ050REI120P023F2 L = H = with BRACKETS or EXPANSION SCREWS REI 120 CSI0740RF CSI0741RF BZ050REI120P021F2 L = H = L = H = L = H = with EXPANSION SCREWS L = 250 H = 400 minimum 300 minimum 300 with EXPANSION SCREWS L = 300 H = 400 REI 120 CSI1211FR BZ050REI120P030F1 REI 120 CSI1211FR L = H = minimum 300 minimum 300 with EXPANSION SCREWS dim. = 300 BZ050REI120P030F1 REI 120 CSI1211FR L = H = minimum 220 minimum 300 BZ050REI120P030F1 11

13 _GB.fh :31 Uhr Seite 10 MODELS/CERTIFICATES Univer REI 120 doule-lef doors Versions Wll opening L = 940 (L L2 400) (L L2 1000) H = Notes / Glss pnel dimensions with EXPANSION SCREWS Certifictes / Government pprovl REI 120 CSI1211FR L = 1700 (L L2 850) (L L2 1000) H = with EXPANSION SCREWS L = 250 H = 400 BZ050REI120P030F1 REI 120 CSI1211FR * = min lef * L = 1250 (L L2 400) (L L2 1000) H = L = 1800 (L L2 900) (L L2 1000) H = minimum 300 minimum 300 with EXPANSION SCREWS L = 250 H = 400 minimum 300 minimum 300 with EXPANSION SCREWS L = 300 H = 400 BZ050REI120P030F1 REI 120 CSI1211FR BZ050REI120P030F1 REI 120 CSI1211FR * = min lef * L = 1300 (L L2 400) (L L2 1000) H = L = 1480 (L L2 740) (L L2 1000) H = minimum 300 minimum 300 with EXPANSION SCREWS L = 300 H = 400 minimum 300 minimum 300 with EXPANSION SCREWS dim. = 300 BZ050REI120P030F1 REI 120 CSI1211FR BZ050REI120P030F1 REI 120 CSI1211FR L = 1140 (L L2 400) (L L2 1000) H = minimum 220 minimum 300 with EXPANSION SCREWS dim. = 300 BZ050REI120P030F1 REI 120 CSI1211FR * = min lef * minimum 220 minimum 300 BZ050REI120P030F1 12

14 _GB.fh :31 Uhr Seite 11 13

15 _GB.fh :31 Uhr Seite 12 SPECIFICATIONS/SECTIONS Univer EI 2 30 single-lef doors Univer EI 2 30 single-lef doors (UNI EN 1634): Glvnized steel-sheet reversile door lef with insultingmteril core, totl thickness 50 mm. Assemled corner reversile frme, with or without ottom frme, mde of glvnized steel-sheet profile, with rckets to e set into wll. Reversile opening pull right (DX) or left (SX) for stndrd, semistndrd nd to order door version. Full lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with ntiscrtch eten finish - light pstel turquoise for door lef (NCS4020- B50G), nd drker shde for the frme (NCS5020-B50G). By request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxypolyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finishing cn e smooth or emossed in ccordnce with the decortion selected. Mximum dimensions: 1150 x Weight pprox. 29 kg/m 2 metre wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - For door repinting follow instructions on pge surfce tretment. - FFL = Finished floor level. pprox. FM H/ Verticl sections FFL 32 Net pssge= FM H Wll opening= (FM H) Externl frme= FM H + 13 Net pssge = FM L - 74 Horizontl sections Wll opening (FM L) Externl frme = FM L

16 _GB.fh :31 Uhr Seite 13 SPECIFICATIONS/SECTIONS Univer EI 2 60 single-lef doors Univer EI 2 60 single-lef doors (UNI EN 1634): Glvnized steel-sheet reversile door lef with insultingmteril core, totl thickness 60 mm. Assemled corner reversile frme, with or without ottom frme, mde of glvnized steel-sheet profile, with rckets to e set into wll nd preprtion for fixing with expnsion screws. Reversile opening pull right (DX) or left (SX) for stndrd, semistndrd nd to order door version. Full lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. On request the door cn lso e supplied s n EI 2 60-Sm smoke control door in ccordnce with stndrd EN nd EN In this cse the door comes fitted with ruer sel FF /CR, n nodised utomtic sill sels nd strike sel fitted to the centrl post. Fitted with door closer CP1 or CP 2 the door cn e clssified C. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). By request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finishing cn e smooth or emossed in ccordnce with the decortion selected. Mximum dimensions: 1150 x Weight pprox. 35 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - For door repinting follow instructions on pge surfce tretment. - FFL = Finished floor level. pprox. FM H/ Verticl sections FFL 32 Net pssge = FM H Wll opening = (FM H) Externl frme = FM H + 13 Net pssge = FM L Horizontl sections +20 Wll opening (FM L) +10 Externl frme = FM L

17 _GB.fh :31 Uhr Seite 14 SPECIFICATIONS/SECTIONS Univer EI 2 60 doule-lef doors Univer EI 2 60 doule-lef doors (UNI EN 1634): Glvnized steel-sheet reversile door lef with insulting-mteril core, totl thickness 60 mm. Corner reversile frme, with or without ottom frme, mde of glvnized steel-sheet profile, with rckets to e set into wll nd preprtion for fixing with expnsion screws. The frme is supplied non-ssemled. Reversile opening pull right (DX), trnsformle in pull left (SX) for stndrd, semistndrd nd to order door version. Full lock in min lef with cylinder ore nd plstic keyhole for ptent key, included. Self-locking mechnism with uilt-in relese lever on secondry door lef. Milled slot for the utomtic locking lock on the secondry door lef prepred for the ppliction of pnic hrdwre. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one per lef llering with screws for the verticl djustment. Locking regultor to gurntee the correct locking sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Floor ctch to e fitted y mens of screws/plugs onto the finished floor. Thermoexpnding gsket inserted in pproprite cvity in frme. On request the door cn lso e supplied s n EI 2 60-Sm smoke control door in ccordnce with stndrd EN nd EN In this cse the door comes fitted with ruer sel FF /CR, two nodised utomtic sill sels nd strike sel fitted to the centrl post. Fitted with two door closers CP1 or CP2 the door cn e clssified C5. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). By request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finishing cn e smooth or emossed in ccordnce with the decortion selected. Mximum dimensions: 2000 x 2150 mm. Weight pprox. 35 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - For door repinting follow instructions on pge surfce tretment. - FFL = Finished floor level. Net pssge = FM L -80 Net pssge min lef = L1-75 Verticl sections FFL 32 Net pssge = FM H pprox. FM H/ Wll opening = (FM H) Externl frme = FM H + 13 if necessry, floor ctch set L2 L Horizontl sections Wll opening (FM L) Externl frme = FM L

18 _GB.fh :31 Uhr Seite 15 SPECIFICATIONS/SECTIONS Univer REI 60 single-lef doors Univer REI 60 single-lef doors: Glvnized steel-sheet reversile door lef with insulting-mteril core, totl thickness 50 mm. Assemled corner reversile frme, with or without ottom frme, mde of glvnized steel-sheet profile, with rckets to e set into wll nd preprtion for fixing with expnsion screws. Reversile opening pull right (DX) or left (SX) for stndrd, semistndrd nd to order door version. Full lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). By request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finishing cn e smooth or emossed in ccordnce with the decortion selected. Mximum dimensions: 1350 x 2150 mm. Weight pprox. 33 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - For door repinting follow instructions on pge surfce tretment. - FFL = Finished floor level. pprox. FM H/ Verticl sections FFL 32 Net pssge = FM H Wll opening (FM H) Externl frme = FM H + 13 Net pssge = FM L - 74 Horizontl sections Wll opening (FM L) Externl frme = FM L

19 _GB.fh :31 Uhr Seite 16 SPECIFICATIONS/SECTIONS Univer REI 60 doule-lef doors Univer REI 60 doule-lef doors: Glvnized steel-sheet reversile door lef with insulting-mteril core, totl thickness 50 mm. Corner reversile frme, with or without ottom frme, mde of glvnized steel-sheet profile, including preprtion for plugs. The frme is supplied non-ssemled. Reversile opening pull right (DX), trnsformle in pull left (SX) for stndrd, semistndrd nd to order door version. Full lock in min lef with cylinder ore nd plstic keyhole for ptent key, included. Self-locking mechnism with uilt-in relese lever on secondry door lef. Milled slot for the utomtic locking lock on the secondry door lef prepred for the ppliction of pnic hrdwre. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one per lef ll-ering with screws for the verticl djustment. Locking regultor to gurntee the correct locking sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Floor ctch to e fitted y mens of screws/plugs onto the finished floor. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). By request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finishing cn e smooth or emossed in ccordnce with the decortion selected. Mximum dimensions: 2000 x 2150 mm. Weight pprox. 33 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - For door repinting follow instructions on pge surfce tretment. - FFL = Finished floor level. Verticl sections FFL 32 Net pssge = FM H - 40 pprox. FM H/ Wll opening (FM H) Externl frme = FM H + 13 Net pssge = FM L - 80 Net pssge min lef = L1-75 Horizontl sections if necessry, floor ctch set L2 +20 Wll opening (FM L) +10 Externl frme = FM L +26 L

20 _GB.fh :31 Uhr Seite 17 SPECIFICATIONS/SECTIONS Univer REI 120 single-lef doors Univer REI 120 single-lef doors: Glvnized steel-sheet reversile door lef with insulting-mteril core, totl thickness 60 mm. Assemled corner reversile frme, with or without ottom frme, mde of glvnized steel-sheet profile, with rckets to e set into wll nd preprtion for fixing with expnsion screws. Reversile opening pull right (DX) or left (SX) for stndrd, semistndrd nd to order door version. Full lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). By request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finishing cn e smooth or emossed in ccordnce with the decortion selected. Mximum dimensions: 1350 x 2150 mm. Weight pprox. 43 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - For door repinting follow instructions on pge surfce tretment. - FFL = Finished floor level. pprox. FM H/ Verticl sections FFL 32 Net pssge = FM H Wll opening (FM H) Externl frme = FM H + 13 Net pssge = FM L - 74 Horizontl sections Wll opening (FM L) Externl frme = FM L

21 _GB.fh :31 Uhr Seite 18 SPECIFICATIONS/SECTIONS Univer REI 120 doule-lef doors Univer REI 120 doule-lef doors: Glvnized steel-sheet reversile door lef with insulting-mteril core, totl thickness 60 mm. Corner reversile frme, with or without ottom frme, mde of glvnized steel-sheet profile, including preprtion for plugs. The frme is supplied non-ssemled. Reversile opening pull right (DX), trnsformle in pull left (SX) for stndrd, semistndrd nd to order door version. Full lock in min lef with cylinder ore nd plstic keyhole for ptent key, included. Self-locking mechnism with uilt-in relese lever on secondry door lef. Secondry lef with internl upper nd lower closing rod with centrl mnul control nd prepred to receive the nti-pnic kit. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one per lef ll-ering with screws for the verticl djustment. Closing regultor to gurntee the correct closing sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Floor ctch to e fitted y mens of screws/plugs onto the finished floor. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). By request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finishing cn e smooth or emossed in ccordnce with the decortion selected. Mximum dimensions: 2000 x 2150 mm. Weight pprox. 43 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - For door repinting follow instructions on pge surfce tretment. - FFL = Finished floor level. Verticl sections FFL 32 Net pssge = FM H - 40 pprox. FM H/ Wll opening (FM H) Externl frme = FM H + 13 Net pssge = FM L -80 Net pssge min lef = L1-75 Horizontl sections if necessry, floor ctch set L2 L Wll opening (FM L) +10 Externl frme = FM L

22 _GB.fh :31 Uhr Seite 19 DIMENSIONS Univer single-lef doors Single-lef STANDARD doors reversile WALL OPENING NET PASSAGE EXTERNAL FRAME width +10 height +5 width height width height Single-lef SEMISTANDARD doors reversile WALL OPENING NET PASSAGE EXTERNAL FRAME +20 width width width height +5 height min. mx. min. mx. min. mx. height Dimensions for EI 2 30 nd EI 2 60 doors only. Dimensions for REI 60 nd REI 120 doors only. 21

23 _GB.fh :31 Uhr Seite 20 DIMENSIONS Univer single-lef doors EI 2 30 nd EI 2 60-single-lef doors reversile TO ORDER WALL OPENING NET PASSAGE EXTERNAL FRAME width +10 height +5 width height width height min. mx. min. mx. min. mx. min. mx. min. mx. min. mx REI 60 nd REI single-lef doors reversile TO ORDER WALL OPENING NET PASSAGE EXTERNAL FRAME width +10 height +5 width height width height min. mx. min. mx. min. mx. min. mx. min. mx. min. mx Specify the opening direction of the following one lef doors: ll doors with window pertures ll doors feturing electro hndles ELM ll doors feturing non-stndrd locks. The customer must e wre tht ccording to decrees 626 dted nd 242 dted ll doors used for emergency wys or exits must hve minimum height of 2000 mm. (=wll opening 2040 mm). The dimensions of doors re limited ccording to the specifictions on the pge models/certifictes. 22

24 _GB.fh :31 Uhr Seite 21 DIMENSIONS Univer doule-lef doors Doule-lef STANDARD doors reversile WALL OPENING LEAF DIVISION NET PASSAGE EXTERNAL FRAME width width +10 height +5 min L1 second. L2 height width height totl min Dimensions for EI 2 60 doors only. Dimensions for REI 60 nd REI 120 doors only. 23

25 _GB.fh :31 Uhr Seite 22 DIMENSIONS Univer doule-lef doors Doule-lef SEMISTANDARD doors reversile WALL OPENING LEAF DIVISION NET PASSAGE +20 width min L1 secondry L2 totl width height +5 min. mx. min. mx. min. mx. min. mx. height El doule - lef doors reversile TO ORDER WALL OPENING LEAF DIVISION NET PASSAGE width +10 height +5 min L1 secondry L2 totl width height min. mx. min. mx. min. mx. min. mx. min. mx. min. mx REI 60 nd REI doule - lef doors reversile TO ORDER WALL OPENING LEAF DIVISION NET PASSAGE width +10 height +5 min L1 secondry L2 totl width height min. mx. min. mx. min. mx. min. mx. min. mx. min. mx Specify the opening direction of the following two lef doors: ll doors feturing nti pnic r on the secondry lef ll doors feturing window pertures ll doors feturing the electro hndle ELM ll doors feturing non-stndrd locks. Stndrd, semistndrd nd to order two lef doors not included in the ove list, where not specificlly requested y the customer, re supplied with pull opening direction right DX. The customer must e wre tht ccording to decrees 626 dted nd 242 dted ll doors used for emergency wys or exits must hve minimum height of 2000 mm. (=wll opening 2040 mm). The dimensions of doors re limited ccording to the specifictions on the pge models/certifictes. 24

26 _GB.fh :31 Uhr Seite 23 POSITIONS OF BRACKETS/ENCUMBRANCES Univer doors Wll opening (FM L) FM L Wll opening (FM L) FM L FFL Wll opening (FM H) FM H FM H 2 FFL Wll opening (FM H) FM H FM H 2 Single-lef door opening right DX Wll opening (FM L) Single-lef door opening left SX Wll opening (FM L) L2-232 L2-232 L2-232 L2-232 Wll opening (FM H) FM H 2 FFL FM H 2 Wll opening (FM H) FM H 2 FFL FM H 2 Doule-lef door opening right DX Doule-lef door opening left SX X = FM L +29 Z = FM L -198 A TW = 110 A SL = 75 A TX = 130 A TB = 74 B REI120 = 74 B REI60 = 64 B EI 2 60 = 74 B EI 2 30 = 64 Height of hndle see pge Specifictions/ Sections 25 Z B Wll opening (FM L) A X X Z Wll opening (FM L) X = FM L +4 Z = FM L -223 Height of hndle see pge Specifictions/Sections Door with CP2 not openle to 180 Mximum dimensions for single-lef doors opening 90 Mximum dimensions for single-lef doors opening 180

27 _GB.fh :31 Uhr Seite 24 ENCUMBRANCES/GLASS PANELS Univer doors X = L1 +35 Y = L2 +64 Z = L1-198 A TW = 110 A SL = 75 A TX = 130 A TB = Wll opening (FM L) L1 L2 B Z Wll opening (FM L) L1 L Z B REI120 = 77 B REI60 = 67 B EI 2 60 = 77 Height of hndle see pge Specifictions/ A Sections 20 Mximum dimensions for doule-lef doors opening to X Y X X = L1 +5 Y = L2 +34 Z = L1-223 Height of hndle see pge Specifictions/Sections Door with CP2 or RC2 not openle 180 Mximum dimensions for doule-lef doors opening to 180 Y Glss Pnel L 250 x H 400 L 300 x H 400 Wll opening (FM H) min.2050 (FM L/L1/L2) 300 min FM H FM H Edge Glss dim. LxH Edge Glss dim. LxH Edge Glss dim. LxH El 2 60 L 250 x H 400 FM L min. 750 L1 / L2 min. 850 El 2 60 L 300 x H 400 FM L min. 800 L1 / L2 min. 900 REI 60 / 120 L 250 x H 400 FM L / L1 / L2 min. 850 REI 60 / 120 L 300 x H 400 FM L / L1 / L2 min. 900 Horizontl section of rectngulr window with EI 2 60 glss Horizontl section of rectngulr window with REI 60 glss Horizontl section of rectngulr window with REI 120 glss Glss pnel Ø300 Ø400 Wll opening (FM H) min.2050 (FM L/L1/L2) Ø Glss 300 min. A El 2 60 Ø300 FM L / L1 / L2 min. 740 El 2 60 Ø400 FM L / L1 / L2 min. 840 REI 60 / 120 Ø300 FM L / L1 / L2 min. 740 FM H = A = 1600 (Ø300) A = 1550 (Ø400) FM H 2150 A = 1600 (Ø300) A = 1600 (Ø400) Edge Glss dim. Ø Horizontl section of circulr window with EI 2 60 glss Edge Glss dim. Ø Horizontl section of circulr window with REI 60 glss Edge Glss dim. Ø Horizontl section of circulr window with REI 120 glss 26

28 _GB.fh :31 Uhr Seite 25 ACCESSORIES Univer doors 73 FF lck wether stripping to e inserted into the specil chnnel provided on the frme. Supplied only on request nd in loose rolls for cutting nd fitting on site. Glss holders IM in glvnized steel (thickness 1.5 mm). Thermlly powder coted in pstel turquoise or RAL on request. To e fixed with screws nd plugs. Delivery upon request nd does not include screws/expnsion screws. Holes re not prepred. L L L 10 L= 35 mm for lef with thickness 50 mm L= 40 mm for lef with thickness 60 mm All doors re supplied without CIL cylinders. These re supplied only on request or together with emergency hndles. Ech cylinder comes with 3 keys, either with its own individul numer or s prt of system with mster key. pprox. 290 Overhed door closer CP1 with flt form rm, lterl regultion of closing speed nd ck check. Finish silver. Adjustle closing force 3 to TWIST (TW) TAURUS INOX (TX) SLASH (SL) Holes-cover plte Pnic hrdwre Twist, Turusstinless steel nd Slsh with internl locking, two control oxes nd r. The pnic hrdwre hndles re supplied unssemled. The externl cover plte is supplied of series with the Slsh-pnic hrdwre for single-lef doors nd for min-lefs on doule-lef doors. The vrious types re listed on the pge for ccessories / ntipnic hndles in the chpter on PROGET. 27

29 _GB.fh :31 Uhr Seite 26 ACCESSORIES Univer doors Fire resistnt doors prepred for the ppliction of hndle M14 or for r Twist nd Slsh type A re supplied with crrier rm (not fitted) to permit ppliction of the door closer regultor y pushing only the secondry door lef. Support with closing regultor Verticl sections Door closer regultor RC/STD for two lef doors Univer in its component prts not fitted, to e fitted on the rcket included in delivery. Horizontl sections Crrier rm Secondry lef * 90 Min lef *...Opening ngle regolle 28

30 _GB.fh :31 Uhr Seite 27 SURFACE FINISHING Univer doors Doors re supplied with pint finish for indoor use. For repinting proceed s follows: - snd nd dust off the surfces thoroughly - pply se cot of opque eige 0059(mde y ALCEA of Miln) 2- component epoxy pint EPOX repint the surfces with the enmel or pint desired. The door must not e exposed to tmospheric gents nd direct sunlight. List of RAL tones t stock RAL 9010 RAL 1013 RAL 9001 RAL 9002 RAL 9018 RAL 1003 RAL 1015 RAL 3000 RAL 5010 RAL 5024 RAL 6000 RAL 6005 RAL 7024 RAL 7035 RAL 7038 RAL 8011 RAL 9011 Other RAL tones upon request: RAL1001-RAL1007-RAL1014-RAL1021-RAL1023-RAL1033-RAL2010-RAL3003-RAL3004- RAL3009-RAL3011-RAL3020-RAL5000-RAL5002-RAL5003-RAL5005-RAL5007-RAL5008-RAL5009-RAL5011-RAL5012- RAL5013-RAL5014-RAL5015-RAL5017-RAL6011-RAL6012-RAL6016-RAL6018-RAL6019-RAL6028-RAL6029-RAL7001-RAL7004- RAL7011-RAL7016-RAL7022-RAL7030-RAL7032-RAL7036-RAL7037-RAL7040-RAL7042-RAL7046-RAL7047-RAL8014-RAL8017- RAL8019-RAL8023-RAL9005 RAL tones for outside use: RAL1001-RAL1003-RAL1013-RAL1021-RAL1023-RAL3000-RAL3012-RAL3013-RAL5010- RAL5011-RAL5014-RAL6000-RAL6005-RAL6018-RAL6028-RAL7001-RAL7012-RAL7022-RAL7024-RAL7032-RAL7035-RAL7036- RAL7037-RAL8017-RAL9001-RAL9002-RAL9010-NCS4020-NCS5020 For the clening of our products we recommend the use of wter nd neutrl sop. Do not use clening fluids or other solvents. We do not ccept responsiility for future complints should these recommendtions not e dhered to. (For printing resons the colours might not e like the originl ones) 29

31 _GB.fh :54 Uhr Seite 1 PROGET DOORS MULTIPURPOSE REI 60 - REI

32 _GB.fh :54 Uhr Seite 2 31

33 _GB.fh :54 Uhr Seite 3 PROGET DOORS INDEX PAGE PROGET DOORS INDEX 32 ILLUSTRATIONS PROGET DOORS MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS 35 MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING 42 MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS ON SUB-FRAME OR EXPANSION SCREW FIXING 43 MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD PARTITION 44 MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD PARTITION 44 MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD PARTTITION 45 MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD PARTTITION 46 MODELS/CERTIFICATES PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME 46 MODELS/CERTIFICATES PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME MODELS/CERTIFICATES PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME MODELS/CERTIFICATES PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APPLICATION WALL CLAMP FRAME SPECIFICATIONS/SECTIONS PROGET MULTIPURPOSE SINGLE-LEAF DOORS 51 SPECIFICATIONS/SECTIONS PROGET MULTIPURPOSE DOUBLE-LEAF DOORS 52 SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 SINGLE-LEAF DOORS 53 SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 DOUBLE-LEAF DOORS 54 SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 SINGLE-LEAF DOORS ON SUB-FRAME 55 SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 DOUBLE-LEAF DOORS ON SUB-FRAME 56 SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 SINGLE-LEAF DOORS EXPANSION SCREW FIXING 57 SPECIFICATIONS/SECTIONS PROGET REI 60 AND 120 DOUBLE-LEAF DOORS EXPANSION SCREW FIXING 58 SPECIFICATIONS/SECTIONS PLASTERBOARD PARTITION - PROGET REI 60 DOORS SPECIFICATIONS/SECTIONS PLASTERBOARD PARTITION - PROGET REI 120 DOORS SPECIFICATIONS/SECTIONS PROGET REI 60 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME 63 SPECIFICATIONS/SECTIONS PROGET REI 60 DOUBLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME 64 SPECIFICATIONS/SECTIONS PROGET REI 120 SINGLE-LEAF DOORS PLASTERBOARD APPLIC. WALL CLAMP FRAME 65 SPECIFICATIONS/SECTIONS PROGET REI 120 DOUBLE-LEAF DOORS PLASTERBOARD APP. WALL CLAMP FRAME 66 DIMENSIONS PROGET SINGLE-LEAF DOORS STANDARD 67 DIMENSIONS PROGET SINGLE-LEAF DOORS SEMISTANDARD AND TO ORDER 68 DIMENSIONS PROGET DOUBLE-LEAF DOORS STANDARD 69 DIMENSIONS PROGET DOUBLE-LEAF DOORS SEMISTANDARD AND TO ORDER 70 POSITIONS OF BRACKETS PROGET DOORS TO BE SET BY MORTAR ENCUMBRANCES PROGET SINGLE-LEAF DOORS 73 ENCUMBRANCES PROGET DOUBLE-LEAF DOORS 74 ACCESSORIES HANDLES 75 ACCESSORIES EMERGENCY HANDLES 76 GLASS PANELS PROGET MULTIPURPOSE DOORS 77 GLASS PANELS PLASTIC LOUVRE PROGET MULTIPURPOSE DOORS 78 GLASS PANELS PROGET REI 60 AND REI 120 DOORS 79 SECTIONS GLASS PANELS PROGET REI 60 AND REI 120 DOORS 80 ACCESSORIES DOOR CLOSER AND CARRIER ARM FOR PROGET DOORS 81 ACCESSORIES SEQUENCERS FOR PROGET DOORS 82 ACCESSORIES SPECIAL ACCESSORIES FOR PROGET DOORS 83 FRAME EXTENSIONS/APPLICATIONS PROGET DOORS 84 SURFACE FINISHING PROGET DOORS 85 DETECTORS/ELECTROMAGNETS 86 ELECTRIC HANDLE ELM SYSTEM CONTROLLED OPENING /LOCK 3 CLOSING POINTS 89 Ninz compny mintins the right to introduce technicl modifictions t ny time without notice. All dimensions re expressed in mm. Fire rek doors re normlly instlled to comprtmentlize the inside of uildings nd for tht purpose they re uilt. 32

34 _GB.fh :54 Uhr Seite 4 ILLUSTRATIONS Proget doors All NINZ series products re constructed using technologies completely new to the firedoor sector. To gurntee mximum rigidity, the metl sheets of the door leves re glued to the insulting-mteril core. The frme comes unssemled so s to fcilitte trnsporttion from the fctory to the instlltion site. All door components re fully glvnized, nd perfect, esthetic finish results from the use of thermo-hrdened powder coting. All ccessories nd their functions re specilly selected nd studied so tht ll relevnt norms, in prticulr those regrding the selflocking mechnism of the secondry door leves, re dhered to. Mny yers of concentrted reserch nd constnt testing in the compny s own lortories hve led to the cretion of mechniclly dependle nd fire-proof product. 33

35 _GB.fh :54 Uhr Seite 5 ILLUSTRATIONS Proget doors 34

36 _GB.fh :54 Uhr Seite 6 Versions Wll opening dimensions L = H= MODELS/CERTIFICATES Proget REI 60 single-lef doors Glss pnel dimensions Certifictes / Government pprovl REI 60 CSI0420RF BZ050REI060P005F1 L = H= REI 60 CSI0613RF BZ050REI060P012F2 L = H= L = H= minimum 250 minimum 300 REI 60 CSI0420RF BZ050REI060P005F1 L = H= L = H= L = H= L = H= minimum 300 minimum 300 L = H= min. re 0,25m minimum 250 minimum 300 REI 60 CSI0613RF BZ050REI060P012F2 REI 60 CSI0447RF BZ050REI060P004F1 L = H= REI 60 CSI0615RF BZ050REI060P014F2 L = H= L = H= minimum 360 minimum 300 REI 60 CSI0615RF BZ050REI060P014F2 35

37 _GB.fh :54 Uhr Seite 7 MODELS/CERTIFICATES Proget REI 60 doule-lef doors Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = 890(L1 540+L2 350)- 2000(L L2 1000) H= REI 60 CSI0614RF BZ050REI060P013F2 L = 1700(L1 850+L2 850)- 2000(L L2 1000) L = H= H= REI 60 minimum 300 minimum 300 CSI0614RF BZ050REI060P013F2 * = min lef * L =1200(L1 850+L2 350)- 2000(L L2 1000) L = H = H= REI 60 minimum 300 minimum 300 CSI0614RF BZ050REI060P013F2 * = min lef * L =1390(L1 540+L2 850)- 2000(L L2 1000) L = H= H= REI 60 minimum 300 minimum 300 CSI0614RF BZ050REI060P013F2 * = min lef 2 1 * L = 1500(L1 750+L2 750)- 1800(L1 900+L2 900) H= L = 1538(L1 771,5+L2 766,5)- 2062(L1 1028,5+L2 1033,5) H= :L= H= min. re 0,25m 2:L= H= minimum 250 minimum 300 REI 60 CSI0447RF BZ050REI060P004F1 * = min lef * L = 1100(L1 750+L2 350)- 1800(L1 900+L2 900) L = H= H= min. re 0,25 m REI 60 L =1538(L1 771,5+L2 766,5)- 2062(L1 1028,5+L2 1033,5) H= minimum 250 minimum 300 CSI0447RF BZ050REI060P004F1 L = 890(L1 540+L2 350)- 2540(L L2 1270) H= REI 60 CSI0621RF BZ050REI060P016F2 36

38 _GB.fh :54 Uhr Seite 8 Versions Wll opening dimensions MODELS/CERTIFICATES Proget REI 60 doule-lef doors Glss pnel dimensions Certifictes / Government pprovl L = 1800 (L1 900+L2 900)- 2540(L L2 1270) L = H= H= REI 60 minimum 325 minimum 300 CSI0621RF BZ050REI060P016F2 * = min lef * L = 1250 (L1 900+L2 350)- 2540(L L2 1270) L = H= H= REI 60 minimum 325 minimum 300 CSI0621RF BZ050REI060P016F2 * = min lef * L = 1440(L1 540+L2 900)- 2540(L L2 1270) L = H= H= REI 60 minimum 325 minimum 300 CSI0621RF BZ050REI060P016F2 Proget REI 120 single-lef doors Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = H= REI 120 CSI0452RF BZ050REI120P002F1 L = H= REI 120 CSI0611RF BZ050REI120P010F2 L = H= L = H = minimum 320 minimum 300 REI 120 CSI0452RF BZ050REI120P002F1 37

39 _GB.fh :54 Uhr Seite 9 MODELS/CERTIFICATES Proget REI 120 single-lef doors Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = H= L = H= L = H= L = H = minimum 300 minimum 300 L = H = min.re 0,25 m minimum 250 minimum 300 REI 120 CSI0611RF BZ050REI120P010F2 REI 120 CSI0454RF BZ050REI120P006F1 L = H= REI 120 CSI0610RF BZ050REI120P011F2 L = H= L = H= L = H= min.re 0,25 m minimum 320 minimum 300 REI 120 CSI0460RF BZ050REI120P007F1 L = H= L = H= minimum 360 minimum 300 REI 120 CSI0610RF BZ050REI120P011F2 Proget REI 120 doule-lef doors Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = 890(L1 540+L2 350)- 2000(L L2 1000) H= REI 120 CSI0602RF BZ050REI120P008F2 38

40 _GB.fh :54 Uhr Seite 10 Versions Wll opening dimensions MODELS/CERTIFICATES Proget REI 120 doule-lef doors Glss pnel dimensions Certifictes / Government pprovl L = 1700(L1 850+L2 850)- 2000(L L2 1000) L = H= H= REI 120 minimum 300 minimum 300 CSI0602RF BZ050REI120P008F2 * = min lef * L = 1200(L1 850+L2 350)- 2000(L L2 1000) L = H= H= REI 120 minimum 300 minimum 300 CSI0602RF BZ050REI120P008F2 * = min lef * L = 1390(L1 540+L2 850)- 2000(L L2 1000) L = H= H= REI 120 minimum 300 minimum 300 CSI0602RF BZ050REI120P008F2 * = min lef 2 1 * L = 1500(L1 750+L2 750)- 1800(L1 900+L2 900) H= L = 1538(L1 771,5+L2 766,5)- 2062(L1 1028,5+L2 1033,5) H= : L= H= min. re 0,25 m 2: L= H= minimum 250 minimum 300 REI 120 CSI0454RF BZ050REI120P006F1 * = min lef * L = 1100(L1 750+L2 350)- 1800(L1 900+L2 900) L = H= H= min. re 0,25 m REI 120 L = 1538(L1 771,5+L2 766,5)- 2062(L1 1028,5+L2 1033,5) H= minimum 250 minimum 300 CSI0454RF BZ050REI120P006F1 L = 890(L1 540+L2 350)- 2540(L L2 1270) H= REI 120 CSI0619RF BZ050REI120P015F2 L = 1800(L1 900+L2 900)- 2540(L L2 1270) L = H= H= REI 120 minimum 325 minimum 300 CSI0619RF BZ050REI120P015F2 39

41 _GB.fh :54 Uhr Seite 11 MODELS/CERTIFICATES Proget REI 120 doule-lef doors Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl * = min lef * L = 1250(L1 900+L2 350)- 2540(L L2 1270) L = H= H= REI 120 minimum 325 minimum 300 CSI0619RF BZ050REI120P015F2 * = min lef * L = 1440(L1 540+L2 900)- 2540(L L2 1270) L = H= H= REI 120 minimum 325 minimum 300 CSI0619RF BZ050REI120P015F2 * = min lef * = min lef 2 1 c * * L = 1900(L1 890+L2 1010)- 2315(L L2 1160) H= L = 1975(L1 989+L2 986)- 2540(L L2 1272) H= L = 1240(L1 890+L2 350)- 2315(L L2 1160) L = H= min. re 0,25 m 2 H= REI 120 L = 1975(L1 989+L2 986)- 2540(L L2 1272) H= : L= H= : L= H= min. re 0,25 m minimum 320 minimum 300 c minimum 380 minimum 320 minimum 300 REI 120 CSI0460RF BZ050REI120P007F1 CSI0460RF BZ050REI120P007F1 Proget REI 60 single-lef doors on su-frme or expnsion screw fixing Versions Wll opening dimensions L = H= L = H= Glss pnel dimensions Certifictes / Government pprovl REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 L = H= L = H= L = H= minimum 300 minimum 300 REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 40

42 _GB.fh :54 Uhr Seite 12 MODELS/CERTIFICATES Proget REI 60 single-lef doors on su-frme or expnsion screw fixing Versions Wll opening dimensions L = H= L = H= Glss pnel dimensions dim. mx.= 400 minimum 300 minimum 300 Certifictes / Government pprovl REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 Proget REI 60 doule-lef doors on su-frme or expnsion screw fixing Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = 890(L1 540+L2 350)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 L = 1700(L1 850+L2 850)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 * = min lef * L= 1200(L1 850+L2 350)- 2252(L L2 1126) H= L= 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 * = min lef * L = 1390(L1 540+L2 850)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 L = 1800(L1 900+L2 900)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= dim. mx.= 400 minimum 300 minimum 300 REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 41

43 _GB.fh :54 Uhr Seite 13 MODELS/CERTIFICATES Proget REI 60 doule-lef doors on su-frme or expnsion screw fixing Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl * = min lef * L = 1250(L1 900+L2 350)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= dim. mx.= 400 minimum 300 minimum 300 REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 * = min lef * L = 1440(L1 540+L2 900)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= dim. mx.= 400 minimum 300 minimum 300 REI 60 CSI1174FR BZ050REI060P027F1 CSI1254FR BZ050REI060P031 Proget REI 120 single-lef doors on su-frme or expnsion screw fixing Versions Wll opening dimensions L = H= L = H= Glss pnel dimensions Certifictes / Government pprovl REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 L = H= L = H= L = H= minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 L = H= L = H= dim. mx.= 400 minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 42

44 _GB.fh :54 Uhr Seite 14 Versions Wll opening dimensions MODELS/CERTIFICATES Proget REI 120 doule-lef doors on su-frme or expnsion screw fixing Glss pnel dimensions Certifictes / Government pprovl L = 890(L1 540+L2 350)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 L =1700(L1 850+L2 850)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 * = min lef * L = 1200(L1 850+L2 350)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 * = min lef * L = 1390(L1 540+L2 850)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 L = 1800(L1 900+L2 900)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= dim. mx.= 400 minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 * = min lef * L = 1250(L1 900+L2 350)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= dim. mx.= 400 minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 * = min lef * L = 1440(L1 540+L2 900)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= dim. mx.= 400 minimum 300 minimum 300 REI 120 CSI1114RF BZ050REI120P025F1 CSI1248RF BZ050REI120P032F1 43

45 _GB.fh :54 Uhr Seite 15 MODELS/CERTIFICATES Proget REI 60 single-lef doors Plsterord prtition Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = H= L = H= REI 60 CSI0660RF BZ050REI060P019F2 L = H= L = H= L = H= minimum 300 minimum 300 REI 60 CSI0660RF BZ050REI060P019F2 Proget REI 60 doule-lef doors Plsterord prtition Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L= 890(L1 540+L2 350)- 2000(L L2 1000) H= REI 60 L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= L = 1700(L1 850+L2 850)- 2000(L L2 1000) L = H= H= REI 60 L = 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= minimum 300 minimum 300 CSI0660RF BZ050REI060P019F2 CSI0660RF BZ050REI060P019F2 * = min lef * L = 1200(L1 850+L2 350)- 2000(L L2 1000) L = H= H= REI 60 L = 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= minimum 300 minimum 300 CSI0660RF BZ050REI060P019F2 * = min lef * L = 1390(L1 540+L2 850)- 2000(L L2 1000) L = H= H= REI 60 L = 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= minimum 300 minimum 300 CSI0660RF BZ050REI060P019F2 44

46 _GB.fh :54 Uhr Seite 16 MODELS/CERTIFICATES Proget REI 120 single-lef doors Plsterord prtition Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = H= L = H= REI 120 CSI0636RF BZ050REI120P017F2 L = H= L = H= L = H= minimum 300 minimum 300 REI 120 CSI0636RF BZ050REI120P017F2 Versions Wll opening dimensions Proget REI 120 doule-lef doors Plsterord prtition Glss pnel dimensions Certifictes / Government pprovl L= 890(L1 540+L2 350)- 2000(L L2 1000) H= REI 120 L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= L= 1700(L1 850+L2 850)- 2000(L L2 1000) L = H= H= REI 120 L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= minimum 300 minimum 300 CSI0636RF BZ050REI120P017F2 CSI0636RF BZ050REI120P017F2 * = min lef * L= 1200(L1 850+L2 350)- 2000(L L2 1000) L = H= H= REI 120 L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= minimum 300 minimum 300 CSI0636RF BZ050REI120P017F2 * = min lef * L= 1390(L1 540+L2 850)- 2000(L L2 1000) L = H= H= REI 120 L= 1707(L1 855,5+L2 851,5)- 2293(L1 1144,5+L2 1148,5) H= minimum 300 minimum 300 CSI0636RF BZ050REI120P017F2 45

47 _GB.fh :54 Uhr Seite 17 MODELS/CERTIFICATES Proget REI 60 single-lef doors Appliction in plsterord wlls y mens of clmp frme Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = H= L = H= REI 60 CSI1218FR BZ050REI060P029F1 L = H= L = H= L = H= minimum 300 minimum 300 REI 60 CSI1218FR BZ050REI060P029F1 L = H= L = H= dim. mx.= 400 minimum 300 minimum 300 REI 60 CSI1218FR BZ050REI060P029F1 Proget REI 60 doule-lef doors Appliction in plsterord wlls y mens of clmp frme Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = 890(L1 540+L2 350)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= REI 60 CSI1218FR BZ050REI060P029F1 L = 1700(L1 850+L2 850)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 60 CSI1218FR BZ050REI060P029F1 * = min lef * L = 1200(L1 850+L2 350)- 2252(L L2 1126) H= L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 REI 60 CSI1218FR BZ050REI060P029F1 46

48 _GB.fh :54 Uhr Seite 18 Versions Proget REI 60 doule-lef doors Appliction in plsterord wlls y mens of clmp frme Wll opening dimensions MODELS/CERTIFICATES Glss pnel dimensions Certifictes / Government pprovl * = min lef * L = 1390(L1 540+L2 850)- 2252(L L2 1126) H= REI 60 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= L = H= minimum 300 minimum 300 CSI1218FR BZ050REI060P029F1 L = 1800(L1 900+L2 900)- 2252(L L2 1126) dim. mx.= 400 H= REI 60 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1218FR BZ050REI060P029F1 * = min lef * L = 1250(L1 900+L2 350)- 2252(L L2 1126) dim. mx.= 400 H= REI 60 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1218FR BZ050REI060P029F1 * = min lef * L = 1440(L1 540+L2 900)- 2252(L L2 1126) dim. mx.= 400 H= REI 60 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1218FR BZ050REI060P029F1 Versions Proget REI 120 single-lef doors Appliction in plsterord wlls y mens of clmp frme Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = H= L = H= REI 120 CSI1137RF BZ050REI120P026F1 L = H= L = H= L = H= minimum 300 minimum 300 REI 120 CSI1137RF BZ050REI120P026F1 47

49 _GB.fh :54 Uhr Seite 19 MODELS/CERTIFICATES Proget REI 120 single-lef doors Appliction in plsterord wlls y mens of clmp frme Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = H= L = H= dim. mx.= 400 minimum 300 minimum 300 REI 120 CSI1137RF BZ050REI120P026F1 Proget REI 120 doule-lef doors Appliction in plsterord wlls y mens of clmp frme Versions Wll opening dimensions Glss pnel dimensions Certifictes / Government pprovl L = 890(L1 540+L2 350)- 2252(L L2 1126) H= REI 120 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= CSI1137RF BZ050REI120P026F1 L = 1700(L1 850+L2 850)- 2252(L L2 1126) L = H= H= REI 120 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1137RF BZ050REI120P026F1 * = min lef * L = 1200(L1 850+L2 350)- 2252(L L2 1126) L = H= H= REI 120 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1137RF BZ050REI120P026F1 * = min lef * L = 1390(L1 540+L2 850)- 2252(L L2 1126) L = H= H= REI 120 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1137RF BZ050REI120P026F1 L = 1800(L1 900+L2 900)- 2252(L L2 1126) dim. mx.= 400 H= REI 120 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1137RF BZ050REI120P026F1 48

50 _GB.fh :54 Uhr Seite 20 Versions * = min lef * Proget REI 120 doule-lef doors Appliction in plsterord wlls y mens of clmp frme Wll opening dimensions L = 1250(L1 900+L2 350)- 2252(L L2 1126) dim. mx.= 400 H= REI 120 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= MODELS/CERTIFICATES Glss pnel dimensions minimum 300 minimum 300 Certifictes / Government pprovl CSI1137RF BZ050REI120P026F1 * = min lef * L = 1440(L1 540+L2 900)- 2252(L L2 1126) dim. mx.= 400 H= REI 120 L = 1962(L1 996+L2 966)- 2540(L L2 1270) H= minimum 300 minimum 300 CSI1137RF BZ050REI120P026F1 49

51 _GB.fh :54 Uhr Seite 21 50

52 _GB.fh :29 Uhr Seite 1 SPECIFICATIONS/SECTIONS Proget MULTIPURPOSE single-lef doors Proget MULTIPURPOSE single-lef doors: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Corner frme mde of glvnized steel-sheet profile, with rckets to e set into wll, joints for on-site ssemly, nd screw-on ottom spcer. Lock complete with cylinder ore nd keyhole for ptent keys. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. Mximum dimensions 1340 x 2670 mm. Weight pprox. 26 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - single-lef door (SX) Opening right - single-lef door (DX) Net pssge = FM H (FM H > 1750) FM H /2 +45 (FM H < 1750) FFL Verticl sections Wll opening (FM H) Externl frme = FM H + 30 Net pssge = FM L Horizontl sections Wll opening (FM L) Externl frme = FM L

53 _GB.fh :29 Uhr Seite 2 SPECIFICATIONS/SECTIONS Proget MULTIPURPOSE doule-lef doors Proget MULTIPURPOSE doule-lef doors: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Corner frme mde of glvnized steel-sheet profile, with rckets to e set into wll, joints for on-site ssemly, nd screw-on ottom spcer. Lock for min lef, with cylinder ore nd keyhole for ptent keys. Self-locking mechnism with uilt-in relese lever on secondry door lef. Cvity for lock on secondry lef lso suitle for emergency-hndle lock. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Floor ctch set with 3 screws/dowels to fix on finished floor. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. Mximum dimensions 2660 x 2670 mm. Weight pprox. 28 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - doule-lef door (SX) Min lef Secondry lef Opening right - doule-lef door (DX) Secondry lef Min lef Net pssge = FM H - 40 FFL 1050 (FM H > 1750) FM H /2 +45 (FM H < 1750) Verticl sections Wll opening (FM H) Externl frme = FM H + 30 Floor ctch set Net pssge = FM L - 80 Net pssge min lef = L1-81 Horizontl sections 50 L2 L1 70 Wll opening (FM L) Externl frme = FM L

54 _GB.fh :29 Uhr Seite 3 SPECIFICATIONS/SECTIONS Proget REI 60 nd REI 120 single-lef doors Proget REI 60 nd REI 120 single-lef doors: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Corner frme mde of glvnized steel-sheet profile, with rckets to e set into wll, joints for on-site ssemly, nd screw-on ottom spcer. Lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes. Sound insultion with utomtic sill sel: REI 60 = 29,5 db REI 120 = 30 db Weight pprox.: REI kg/m 2 wll opening. REI kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - single-lef door (SX) Opening right - single-lef door (DX) Net pssge = FM H FFL Verticl sections Wll opening (FM H) Externl frme = FM H + 30 Net pssge = FM L Horizontl sections Wll opening (FM L) Externl frme = FM L

55 _GB.fh :29 Uhr Seite 4 SPECIFICATIONS/SECTIONS Proget REI 60 nd REI 120 doule-lef doors Proget REI 60 nd REI 120 doule-lef doors: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Corner frme mde of glvnized steel-sheet profile, with rckets to e set into wll, joints for on-site ssemly, nd screw-on ottom spcer. Lock for min lef, with cylinder ore nd keyhole for ptent keys. Self-locking mechnism with uilt-in relese lever on secondry door lef. Cvity for lock on secondry lef lso suitle for emergency-hndle lock. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one ll-ering hinge with screws for the verticl djustment. Closing regultor to ensure correct closing sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme nd in the verticl joint of leves. Floor ctch set with 3 screws/dowels to fix on finished floor Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes. Weight pprox.: REI kg/m 2 wll opening REI kg/m 2 wll opening N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - doule-lef door (SX) Opening right - doule-lef door (DX) Min lef Secondry lef Secondry lef Min lef Net pssge = FM H - 40 FFL 1050 Verticl sections Wll opening (FM H) Externl frme = FM H + 30 Floor ctch set Net pssge = FM L - 80 Net pssge min lef = L Horizontl sections L2 L1 70 Wll opening (FM L) Externl frme = FM L

56 _GB.fh :29 Uhr Seite 5 Fire door PROGET REI 60 nd REI 120 conform to UNI 9723 with one door lef, instlled nd finished key in hnd y mens of screws on the metl su-frme consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. An ngulr frme mde of profiled glvnised sheet steel, supplied lredy fitted with insultion mteril, with joints for on-site ssemly, interior spcers with screws nd holes for the instlltion on the frme. Lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes x x Sound insultion with utomtic sill sel: REI 60 = 29,5 db REI 120 = 30 db Weight pprox.: REI kg/m 2 wll opening. REI kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - single-lef door (SX) Opening right - single-lef door (DX) SPECIFICATIONS/SECTIONS Proget REI 60 nd REI 120 single-lef doors on su-frme Net pssge = FM H FFL Verticl sections Wll opening = (FM H) Externl frme = FM H + 30 Net pssge = FM L Horizontl sections Wll opening = (FM L) Externl frme = FM L

57 _GB.fh :29 Uhr Seite 6 SPECIFICATIONS/SECTIONS Proget REI 60 nd REI 120 doule-lef doors on su-frme Fire door PROGET REI 60 nd REI 120 conform to UNI 9723 with doule door lef, instlled nd finished key in hnd y mens of screws on the metl sufrme consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. An ngulr frme mde of profiled glvnised sheet steel, supplied lredy fitted with insultion mteril, with joints for on-site ssemly, interior spcers with screws nd holes for the instlltion on the frme. Lock for min lef, with cylinder ore nd keyhole for ptent keys. Self-locking mechnism with uilt-in relese lever on secondry door lef. Cvity for lock on secondry lef lso suitle for emergency-hndle lock. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one ll-ering hinge with screws for the verticl djustment. Closing regultor to ensure correct closing sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme nd in the verticl joint of leves. Floor ctch set with 3 screws/dowels to fix on finished floor Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes. 890 ( ) ( ) x ( ) ( ) x Weight pprox.: REI 60 c. 35 kg/m 2 wll opening. REI 120 c. 45 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - doule-lef door (SX) Min lef Secondry lef Opening right - doule-lef door (DX) Secondry lef Min lef Net pssge = FM H - 40 FFL 1050 Verticl sections Wll opening = (FM H) Externl frme = FM H + 30 Floor ctch set Net pssge = FM L - 80 Net pssge min lef = L Horizontl sections L2 L1 70 Wll opening = (FM L) Externl frme = FM L

58 _GB.fh :29 Uhr Seite 7 Fire door PROGET REI 60 or 120 conform to UNI 9723 with one door lef instlled nd finished key in hnd y mens of plugs, consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. An ngulr frme mde of profiled glvnised sheet steel, supplied lredy fitted with insultion mteril, with joints for on-site ssemly, interior spcers with screws nd holes for the instlltion on the frme. Lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes x x Sound insultion with utomtic sill sel: REI 60 = 29,5 db REI 120 = 30 db Weight pprox.: REI kg/m 2 wll opening. REI kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - single-lef door (SX) SPECIFICATIONS/SECTIONS Proget REI 60 nd REI 120 single-lef doors expnsion screw fixing Opening right - single-lef door (DX) Net pssge = FM H FFL Verticl sections Wll opening = (FM H) Externl frme = FM H + 30 Net pssge = FM L Horizontl sections Wll opening = (FM L) Externl frme = FM L

59 _GB.fh :29 Uhr Seite 8 SPECIFICATIONS/SECTIONS Proget REI 60 nd REI 120 doule-lef doors expnsion screw fixing Fire door PROGET REI 60 or 120 conform to UNI 9723 with doule door lef instlled nd finished key in hnd y mens of plugs, consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. An ngulr frme mde of profiled glvnised sheet steel, supplied lredy fitted with insultion mteril, with joints for on-site ssemly, interior spcers with screws nd holes for the instlltion on the frme. Lock for min lef, with cylinder ore nd keyhole for ptent keys. Self-locking mechnism with uilt-in relese lever on secondry door lef. Cvity for lock on secondry lef lso suitle for emergency-hndle lock. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one ll-ering hinge with screws for the verticl djustment. Closing regultor to ensure correct closing sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme nd in the verticl joint of leves. Floor ctch set with 3 screws/dowels to fix on finished floor Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes. 890 ( ) ( ) x ( ) ( ) x Weight pprox.: REI 60 c. 35 kg/m 2 wll opening. REI 120 c. 45 kg/m 2 wll opening. N.B. - Cylinder nd wether stripping re supplied only upon request. - All the RAL colours ville re listed on the order form nd on the pge on surfce finishing. - Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. - FFL = Finished floor level. Opening left - doule-lef door (SX) Min lef Secondry lef Opening right - doule-lef door (DX) Secondry lef Min lef Net pssge = FM H - 40 FFL 1050 Verticl sections Wll opening = (FM H) Externl frme = FM H + 30 Floor ctch set Net pssge = FM L - 80 Net pssge min lef = L Horizontl sections L2 L1 70 Wll opening = (FM L) Externl frme = FM L

60 _GB.fh :29 Uhr Seite 9 SPECIFICATIONS/SECTIONS Plsterord prtition - Proget REI 60 doors Plsterord wlls constructed with: metl mesh in the horizontl guide profile in U form in glvnized steel with thickness 0.6 mm nd section 100 x 40 mm (15), locked t the top nd on the floor, verticl instlltion profiles in C form in glvnized steel with thickness 0.6 mm nd section 100 x 47 mm (14). The mesh section is reted y 75 mm (09, 12) next to the door nd the two instlltion profiles re internlly reinforced y n dditionl C profile in glvnized steel with thickness 0.6 mm nd section of 50 x 47 mm (08); the two fces of the mesh re covered with skin, in the door re with doule lyer plte of plsterord KNAUF GKF AK fireproof, with n externl thickness of 15 mm (06) nd n internl thickness of 12.5 (11); the mesh rete of 75 mm next to the door is filled with minerl wool strips with density of 70 kilos per cuic metre (13). The door frme is specilly prepred for REI 60 ppliction nd this requirement must e specificlly mentioned on ordering. Wll opening (FM L) 43 Horizontl sections 07-Metl ngle ed KNAUF 31x31mm 8 Covered plsterord type KNAUF GKB 9.5mm Self-tpping screw * Silicone Sel Rivet * 03-Fixing metl ngle * 01-Self-tpping screw * * supplied y NINZ 06 59

61 _GB.fh :29 Uhr Seite 10 SPECIFICATIONS/SECTIONS Plsterord prtition - Proget REI 60 doors Fireproof doors PROGET REI 60 single or doule door lef prepred for fixing in plsterord wll consisting of : Door leves in eten glvnized sheet, filled with insultion mteril, without ottom profile, totl thickness 60 mm. Insulted ngled frme consisting of glvnised sheet steel profiles with connectors for ssemly on site, ottom spcer to e screwed nd fixing holes on the wll. Lock set including opening for cylinder nd insert for ptent key. Self locking lock on the secondry door lef with opening lever. The set is lso prepred for the ppliction of hrdwre with n nti-pnic hndle. Sfety olts in the door lef. Blck ccident prevention hndle with steel core complete with cover prepred with n perture for the cylinder nd insert for ptent key. A pir of hinges, one for door lef with utomtic closing spring nd one fitted with resistnce ering with verticl djustment screws. Closing regultor to gurntee the correct closing sequence for doule doors. Internl reinforcement of the door lef to ccommodte possile fitting of door closers nd nti-pnic hndles. Therml expnsion sel in the proper chnnel in the frme nd in the counter profile on the secondry door lef. Floor ctch set with 3 screws/plugs to e instlled on the finished floor. Consignment lel with relevnt informtion locted in the rete of the principl door lef. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish pstel turquiose lighter tone for the door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. Door weight pprox. 35 kg/m 2 of wll opening. For minimum nd mximum dimensions possile plese see pge models/certifictes. Single door lef x Doule door lef 890 ( ) ( ) x x (855,5+851,5) (1144,5+1148,5) x Cylinders nd sels re only supplied on request. Orders re crried ccording to the RAL colour rnge outlined on the surfce tretment pge. Should the door e repinted the instructions outlined on the surfce tretment pge must e followed Verticl sections Wll opening (FM H) 60

62 _GB.fh :29 Uhr Seite 11 SPECIFICATIONS/SECTIONS Plsterord prtition - Proget REI 120 doors Plsterord wlls constructed with: metl mesh in the horizontl guide profile in U form in glvnized steel with thickness 0.6 mm nd section 100 x 40 mm (10), locked t the top nd on the floor, verticl instlltion profiles in C form in glvnized steel with thickness 0.6 mm nd section 100 x 47 mm (12). The mesh section is reted y 75 mm (09) next to the door the two fces of the mesh re covered with doule skin, in the door re with triple lyer plte of plsterord KNAUF GKF AK fireproof, ech with thickness of 12.5 (07); the mesh rete of 75 mm next to the door is filled with minerl wool strips with density of 70 kilos per cuic metre (11). The structure of the door (01) consists of: two sheet steel instlltion profiles (50 x 75 mm) thickness 4 mm nchored y mens of two telescopic profiles nd fitted with fixing pltes for ceiling nd floor; trverse in sheet steel (50x75) with thickness of 4mm nchored on the two structurl instlltion profiles y mens of two telescopic profiles nd fitted with pltes to e fixed with 5.5 mm self cutting screws. The door frme is prepred for REI 120 pplictions nd this should e specified on ordering. Wll opening (FM L) 08-Metl ngle ed KNAUF 31x31mm Horizontl sections Silicone sel 02-Self-tpping screw * 03-Rivet * 05-Self-tpping screw * 04-Fixing metl ngle * * supplied y NINZ ** optionl supplied y NINZ ** Glvnised structure-01 61

63 _GB.fh :29 Uhr Seite 12 SPECIFICATIONS/SECTIONS Plsterord prtition - Proget REI 120 doors Fireproof doors PROGET REI 120 single or doule door lef prepred for fixing in plsterord wll consisting of : Door leves in eten glvnized sheet, filled with insultion mteril, without ottom profile, totl thickness 60 mm. Insulted ngled frme consisting of glvnised sheet steel profiles with connectors for ssemly on site, ottom spcer to e screwed nd fixing holes on the wll. Lock set including opening for cylinder nd insert for ptent key. Self locking lock on the secondry door lef with opening lever. The set is lso prepred for the ppliction of hrdwre with n nti-pnic hndle. Sfety olts in the door lef. Blck ccident prevention hndle with steel core complete with cover prepred with n perture for the cylinder nd insert for ptent key. A pir of hinges, one for door lef with utomtic closing spring nd one fitted with resistnce ering with verticl djustment screws. Closing regultor to gurntee the correct closing sequence for doule doors. Internl reinforcement of the door lef to ccommodte possile fitting of door closers nd nti-pnic hndles. Therml expnsion sel in the proper chnnel in the frme nd in the counter profile on the secondry door lef. Floor ctch set with 3 screws/plugs to e instlled on the finished floor. Consignment lel with relevnt informtion locted in the rete of the principl door lef. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish pstel turquiose lighter tone for the door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. Door weight pprox. 46 kg/m 2 for single lef, doule lef doors pprox. 45 kg/m 2 of wll opening. For minimum nd mximum dimensions possile plese see pge models/certifictes. Single lef x Doule lef 890 ( ) ( ) x x (855,5+851,5) (1144,5+1148,5) x Cylinders nd sels re only supplied on request. Orders re crried ccording to the RAL colour rnge outlined on the surfce tretment pge. Should the door e repinted the instructions outlined on the surfce tretment pge must e followed Verticl sections Wll opening (FM H)

64 _GB.fh :29 Uhr Seite 13 SPECIFICATIONS/SECTIONS Proget REI 60 single-lef doors / Appliction in plsterord wlls y mens of clmp frme PROGET REI 60 single lef doors for clmp fitting prepred for fixing in plsterord wll consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Frme constructed of Insulted glvnized sheet steel clmp profiles with ccessories for ssemly on site prepred with fixing holes nd cover plugs. Lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Stndrd epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes x x Sound insultion with utomtic sill sel: 29.5 db Weight pprox. 37 kg/m 2 wll opening. Cylinder nd wether stripping re supplied only on request. Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. FFL = Finished floor level. Plsterord wlls consisting of : metl mesh in glvnized steel with U guide profile 75 x 40 mm, verticl structurl profiles in C form 75 x 47 mm (douled ginst the door frme), oth sides nd the frme profiles re covered with single skin plsterord model KNAUF GKF AK fireproof with thickness of 12,5 mm. Opening left - single-lef door (SX) Opening right - single-lef door (DX) Allow spce etween frme nd cieling for the screw fixing of the ngles 1050 FFL Net pssge = FM H Verticl sections Hole to prepre = FM H -12 Nominl / order dim. wll opening (FM H) Net pssge = FM L Externl frme = FM H +30 Horizontl sections Hole to prepre = FM L -25 Nominl / order dimensions wll opening (FM L) Externl frme = FM L

65 _GB.fh :29 Uhr Seite 14 SPECIFICATIONS/SECTIONS Proget REI 60 doule-lef doors / Appliction in plsterord wlls y mens of clmp frme PROGET REI 60 doule lef doors for clmp fitting prepred for fixing in plsterord wll consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Frme constructed of Insulted glvnized sheet steel clmp profiles with ccessories for ssemly on site prepred with fixing holes nd cover plugs. Lock for min lef, with cylinder ore nd keyhole for ptent keys. Self-locking mechnism with uilt-in relese lever on secondry door lef. Cvity for lock on secondry lef lso suitle for emergency-hndle lock. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one ll-ering hinge with screws for the verticl djustment. Closing regultor to ensure correct closing sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme nd in the verticl joint of leves. Floor ctch set with 3 screws/dowels to fix on finished floor Identifiction plte on door edge. Epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes. 890 ( ) ( ) x ( ) ( ) x Weight pprox. c. 35 kg/m 2 wll opening. Cylinder nd wether stripping re supplied only on request. Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. FFL = Finished floor level. Plsterord wlls consisting of : metl mesh in glvnized steel with U guide profile 75 x 40 mm, verticl structurl profiles in C form 75 x 47 mm (douled ginst the door frme), oth sides nd the frme profiles re covered with single skin plsterord model KNAUF GKF AK fireproof with thickness of 12,5 mm. Opening left - doule-lef door (SX) Min lef Secondry lef Opening right - doule-lef door (DX) Secondry lef Min lef Allow spce etween frme nd cieling for the screw fixing of the ngles 1050 FFL Net pssge = FM H Verticl sections Hole to prepre = FM H -12 Nominl / order dim. wll opening (FM H) Externl frme = FM H Floor ctch set Net pssge = FM L - 80 Net Pssge min lef = L1-81 Horizontl sections Hole to prepre = FM L -25 L2 L1 Nominl / order dimensions wll opening (FM L) Externl frme = FM L

66 _GB.fh :29 Uhr Seite 15 SPECIFICATIONS/SECTIONS Proget REI 120 single-lef doors / Appliction in plsterord wlls y mens of clmp frme PROGET REI 120 single lef doors for clmp fitting prepred for fixing in plsterord wll consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Frme constructed of Insulted glvnized sheet steel clmp profiles with ccessories for ssemly on site prepred with fixing holes nd cover plugs. Lock complete with cylinder ore nd keyhole for ptent keys. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 2 hinges: one hinge with self-closing spring, one ll-ering hinge with screws for the verticl djustment. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme. Identifiction plte on door edge. Epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door lef (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes x x Sound insultion with utomtic sill sel: 30dB Weight pprox. 46 kg/m 2 wll opening. Cylinder nd wether stripping re supplied only upon request. Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. FFL = Finished floor level. Plsterord wlls consisting of : metl mesh in glvnized steel with U guide profile 75 x 40 mm, verticl structurl profiles in C form 75 x 47 mm (douled ginst the door frme), oth sides nd the frme profiles re covered with single skin plsterord model KNAUF GKF AK fireproof with thickness of 12,5 mm. Opening left - single-lef door (SX) Opening right - single-lef door (DX) Allow spce etween frme nd cieling for the screw fixing of the ngles 1050 Net pssge = FM H FFL Verticl sections Hole to prepre = FM H -12 Nominl / order dim. wll opening (FM H) Externl frme = FM H Net pssge = FM L - 80 Horizontl sections Hole to prepre = FM L -25 Nominl / order dimensions wll opening (FM L) Externl frme = FM L

67 _GB.fh :29 Uhr Seite 16 SPECIFICATIONS/SECTIONS Proget REI 120 doule-lef doors / Appliction in plsterord wlls y mens of clmp frme PROGET REI 120 doule lef doors for clmp fitting prepred for fixing in plsterord wll consisting of: Glvnized steel-sheet door lef with insulting-mteril core, without ottom frme, totl thickness 60 mm. Frme constructed of Insulted glvnized sheet steel clmp profiles with ccessories for ssemly on site prepred with fixing holes nd cover plugs. Lock for min lef, with cylinder ore nd keyhole for ptent keys. Self-locking mechnism with uilt-in relese lever on secondry door lef. Cvity for lock on secondry lef lso suitle for emergency-hndle lock. Sfety olt in hinge-side lef edge. Blck sfety hndle with steel core, supplied with pltes, cylinder ore nd keyholes for ptent keys. 4 hinges, one per lef with spring for the self-closing nd one ll-ering hinge with screws for the verticl djustment. Closing regultor to ensure correct closing sequence. Strengthening pltes inside door lef for fstening door closer nd emergency hndle if required. Thermoexpnding gsket inserted in pproprite cvity in frme nd in the verticl joint of leves. Floor ctch set with 3 screws/dowels to fix on finished floor Identifiction plte on door edge. Epoxy-polyester oven-ked powder coted with nti-scrtch eten finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. For minimum nd mximum dimensions possile plese see pge models/certifictes. 890 ( ) ( ) x ( ) ( ) x Weight pprox. 45 kg/m 2 wll opening. Cylinder nd wether stripping re supplied only upon request. Should the door e repinted the instructions outlined on the surfce tretment pge must e followed. FFL = Finished floor level. Plsterord wlls consisting of : metl mesh in glvnized steel with U guide profile 75 x 40 mm, verticl structurl profiles in C form 75 x 47 mm (douled ginst the door frme), oth sides nd the frme profiles re covered with single skin plsterord model KNAUF GKF AK fireproof with thickness of 12,5 mm. Opening left - doule-lef door (SX) Min lef Secondry lef Opening right - doule-lef door (DX) Secondry lef Min lef Allow spce etween frme nd cieling for the screw fixing of the ngles 1050 Net pssge = FM H FFL Verticl sections Hole to prepre = FM H -12 Nominl / order dim. wll opening (FM H) Externl frme = FM H Net pssge = FM L - 80 Floor ctch set Net pssge min lef = L1-81 Horizontl sections Hole to prepre = FM L -25 L2 L1 Nominl / order dimensions wll opening (FM L) Externl frme = FM L

68 _GB.fh :29 Uhr Seite 1 DIMENSIONS Proget single-lef doors Single-lef STANDARD doors WALL OPENING NET PASSAGE EXTERNAL FRAME +20 width height +5 width height width height

69 _GB.fh :29 Uhr Seite 2 DIMENSIONS Proget single-lef doors Single-lef SEMISTANDARD doors WALL OPENING NET PASSAGE EXTERNAL FRAME +20 width width width height +5 height min. mx. min. mx. min. mx. height Single-lef doors TO ORDER WALL OPENING NET PASSAGE EXTERNAL FRAME width +10 height +5 width height width height min. mx. min. mx. min. mx. min. mx. min. mx. min. mx Dimensions for multipurpose doors only H min. 800 only for Proget Multipurpose doors. H min only for Proget fire rted doors. The tollernces to e pplied on doors REI 60 nd REI 120 for wlled instlltion. It is not possile to produce doors with height less thn width. In cse of doors to e instlled on conceled frme (REI120, REI 60, or multipurpose) the wll opening dimension is the dimension which should e ordered (nominl dimension); the rel wll opening is tht which tkes the encumrnce of the conceled frme into ccount. Doors REI 120 with dimensions FM L x FM H re indicted CP1. The customer must e wre tht ccording to decrees 626 dted nd 242 dted ll doors used for emergency wys or exits must hve minimum height of 2000 mm. (= wll opening 2040 mm). The dimensions of REI doors to e pplied in plsterord wlls s well s the version to e screw fixed re limited ccording to the specifictions on the pge models/certifictes. The dimension of the fixing holes to e mde on the plsterord wll where clmp profiles re used, do not correspond to the wll opening ordered nd must e prepred in ccordnce with the pproprite technicl informtion sheet. The dimensions of doors re limited ccording to the specifictions on the pge models/certifictes. 68

70 _GB.fh :29 Uhr Seite 3 DIMENSIONS Proget doule-lef doors width height width LEAF DIVISION min L1 second. L2 totl min WALL OPENING NET PASSAGE EXTERNAL FRAME height height width Doule-lef STANDARD doors

71 _GB.fh :29 Uhr Seite 4 DIMENSIONS Proget doule-lef doors Doule-lef SEMISTANDARD doors WALL OPENING LEAF DIVISION NET PASSAGE +20 width min L1 secondry L2 totl width height +5 min. mx. min. mx. min. mx. min. mx height Doule-lef doors TO ORDER WALL OPENING LEAF DIVISION NET PASSAGE width +10 height +5 min L1 secondry L2 width height min. mx. min. mx. min. mx. min. mx. min. mx. min. mx Dimensions for multipurpose doors only H min. 800 only for Proget Multipurpose doors. H min only for Proget fire rted doors. Doing the following clcultion you otin the externl frme dimensions: width = wll opening +60 height = wll opening +30 The tollernces to e pplied on doors REI 60 nd REI 120 for wlled instlltion. It is not possile to produce doors with height less thn width. In cse of doors to e instlled on conceled frme (REI120, REI 60 or multipurpose) the wll opening dimension is the dimension which should e ordered (nominl dimension); the rel wll opening is tht which tkes the encumrnce of the conceled frme into ccount. Doors REI 120 with dimensions FM L x FM H re indicted CP1. The customer must e wre tht ccording to decrees 626 dted nd 242 dted ll doors used for emergency wys or exits must hve minimum height of 2000 mm. (= wll opening 2040 mm). The dimensions of REI doors to e pplied in plsterord wlls s well s the version to e screw fixed re limited ccording to the specifictions on the pge models/certifictes. The dimension of the fixing holes to e mde on the plsterord wll where clmp profiles re used, do not correspond to the wll opening ordered nd must e prepred in ccordnce with the pproprite technicl informtion sheet. The dimensions of doors re limited ccording to the specifictions on the pge models/certifictes. 70

72 _GB.fh :29 Uhr Seite 5 POSITIONS OF BRACKETS Proget doors to e set y mortr Wll opening (FM L) 1/2 1/2 Wll opening (FM L) Wll opening (FM L) 1/2 1/2 Wll opening (FM H) 80 FFL Wll opening (FM H) FFL Wll opening (FM H) 80 FFL Single-lef door FM L= x FM H= Single-lef door FM L= x FM H= Single-lef door FM L= x FM H= FM L= x FM H= Wll opening (FM L) FM L Wll opening (FM L) FM L Wll opening (FM H) 80 FFL Wll opening (FM H) 80 FFL Doule-lef door FM L= x FM H= opening DX right Doule-lef door FM L= x FM H= opening SX left 71

73 _GB.fh :29 Uhr Seite 6 POSITIONS OF BRACKETS Proget doors to e set y mortr Wll opening (FM L) FM L 2-30 FM L 2 Wll opening (FM L) -30 Wll opening (FM H) 80 FFL Wll opening (FM H) FFL Doule-lef door FM L= x FM H= opening DX right Doule-lef door FM L= x FM H= opening SX left Wll opening (FM L) FM L Wll opening (FM L) FM L Wll opening (FM H) 80 FFL Wll opening (FM H) 80 FFL Doule-lef door FM L= x FM H= FM L= x FM H= opening DX right Doule-lef door FM L= x FM H= FM L= x FM H= opening SX left 72

74 _GB.fh :29 Uhr Seite 7 ENCUMBRANCES Proget single-lef doors Mximum dimensions for single-lef doors opening to A Wll opening (FM L) 40 X Y X = FM L +27 Y = FM L -200 A emergency hndle TWIST = 110 A emergency hndle SLASH = 75 A emergency hndle TAURUS INOX = 130 A emergency hndle TOUCH BAR = 74 Height of hndle see pge Specifictions/Sections Mximum dimensions for single-lef doors opening to Y Wll opening (FM L) X X = FM L -7 Y = FM L -233 Height of hndle see pge Specifictions/Sections Door with CP2 not openle to

75 _GB.fh :29 Uhr Seite 8 ENCUMBRANCES Proget doule-lef doors Mximum dimensions for doule-lef doors opening to Wll opening (FM L) L1= min lef portion L2= secondry lef portion 80 A 40 X Y Z X = L1 +35 Y = L2 +75 Z = L1-193 A emerg. hndle TWIST = 110 A emerg. hndle SLASH = 75 A emerg. hndle TAURUS INOX =130 A emerg. hndle TOUCH BAR = 74 Height of hndle see pge Specifictions/Sections mx. Mximum dimensions for doule-lef doors opening to Z Wll opening (FM L) L1= min lef portion L2= secondry lef portion X X = L1 +1 Y = L2 +42 Z = L1-226 Height of hndle see pge Specifictions/Sections Door with CP2 or RC2 not openle to 180 Y mx. 74

76 _GB.fh :29 Uhr Seite 9 ACCESSORIES Hndles M 1 M * M 3 emergency hndle M 4 M 5 M 9 M 11 M 14 not ntipnic or emergency version M 20 ** HOT CIL All doors re fitted with M1 lck plstic hndles with steel core. The lterntive versions illustrted ove cn e supplied t request. Hndles re clssified s ccessories nd re supplied not instlled. The hndles M1 nd M2 cn lso e supplied in stinless steel with stin finish nd rounded cover plte. The models M2, M4, M5, M9 e HOT CIL cn not e comined with three point locks. * Door hndle comined with nti-pnic push hrdwre ** Hndle to comine with pull nti-pnic lock for hotel rooms. 75

77 _GB.fh :29 Uhr Seite 10 ACCESSORIES Emergency hndles TWIST (TW) TAURUS INOX (TX) TW BM TX BM TW BSP TX BSP TW BS TW BMC TW BC TW B TX B TW A TX A for second. lef SLASH (SL) SL BM SL BSP SL BS SL BMC SL BC SL B SL A SL AR PL SL for second. lef for second. lef *Holes-cover plte Emergency Twist (TW) nd Slsh (SL) hndles, with lock inside door lef, two control oxes with plstic rods nd steel core, lck, r in nturl nodized luminium. Versions ville: BM - BSP - BS - BMC - BC nd B suitle for single-lef doors or min leves. The version A emergency hndle is suitle only for use with secondry door leves without externl opertion; the locking mechnism consisting of upper nd lower closing rods nd the pproprite lock re hidden out of sight inside the secondry lef. Secondry leves with dimension L2 > 350 nd < 500 cn e fitted with hndle SL AR with reduced control ox. Emergency hndles re supplied not instlled, leves prepred. The holes cover plte hs to e ordered sepertely. * The externl cover plte for the PROGET door should e ordered purpose mde. Anti-pnic hndles Turus stinless stell (TX), with lock on the interior side of the door lef, two control oxes nd r in stinless steel nd steel core. Models BM BSP nd B to e pplied on single lef doors or principl door leves, model A is only pproprite for secondry door leves with no externl function. The models TW BSP, TW BS, TX BSP, SL BSP e SL BS cn not e comined with three point locks. 76

78 _GB.fh :29 Uhr Seite 11 GLASS PANELS Proget MULTIPURPOSE doors Glss pnel L 300 x H 400 Glss pnel L 400 x H 600 Glss pnel L 400 x H 1200 Wll opening (FM H) min min. 300 A 300 min. Wll opening (FM H) min min. 300 A 300 min. Wll opening (FM H) min min A min. (FM L/L1/L2) min. 800 A = 1350 FM H A = 1450 FM H 2150 (FM L/L1/L2) min. 900 A = 1150 FM H A = 1250 FM H 2150 (FM L/L1/L2) min. 900 A = 550 FM H A = 650 FM H 2150 Wll opening (FM H) Glss pnel to order min. 250 min min. MV (FM L / L1 / L2) min. 300 min. 250 min. 300 Glss dimensions (MV) Wll opening (FM H) min.1950 Glss pnel Ø300 nd Ø400 (FM L/L1/L2) FM L / L1 / L2 FM H = FM H 2150 Ø Glss Glss Ø 300 min. 700 A = 1600 A = 1600 A 200 min. Glss Ø 400 min. 800 A = 1550 A = 1600 If requested rectngulr glss pnels complete with screw-in holding frmes my e fitted to oth single-lef nd doule-lef multipurpose doors. Dimensions my e stndrd, s illustrted ove, or to order, s long s the prescried edge dimensions re respected. The term edge refers to the distnce etween the structurl opening of the door nd the glss in its frme. Types of glss ville: Flot trnsprent Wired trnslucent Wired polished trnsprent Sfety lminted (4+4) Sfety lminted (3+3) 5 mm 6,5 mm 6,5 mm 8 mm 6 mm Horizontl section 50 Horizontl section 53.5 Verticl section Hinge side Glss dim. L x H Glss dim. Ø Wll opening Wll opening Multipurpose rectngulr window. Multipurpose circulr window Tiltle window with wired glss 6,5 mm thickness with frme pinted like door (dimension 400 x 600mm). 77

79 _GB.fh :29 Uhr Seite 12 GLASS PANELS/PLASTIC LOUVRE Proget MULTIPURPOSE doors Wll opening (FM H) Ø Glss 1600 Wll opening (FM H) L Verticl section Vision pnel for single nd doule lef PROGET doors mde with ruer EPDM outer profile lck colour nd lminted 3+3 trnsprent sfety glss. Hinge side Ventiltion louvre for multipurpose doors of specil or stndrd dimensions mde of steel nd vrnished like the lef. Ventiltion louvre lck or white, dimensions 482 x 99 mm (ir pssge pprox. 150 cm 2 ). Steel louvre Hinge side Hinge side Hinge side H 1500 Ød / H (FM L/L1/L2) (FM L/L1/L2) Glss Ø300 Glss Ø400 LxH 300x500 LxH 400x700 FM L/L1/L2 min. 700 min. 800 min. 700 min. 800 FM H min. min min min min Steel louvre + ird mesh (net 11 x 11 x 1 mm) Steel louvre + insect mesh (net 5 x 5 x 0.5 mm) Bird mesh (net 16 x 16 x 3 mm) 78

80 _GB.fh :32 Uhr Seite 1 GLASS PANELS Proget REI 60 nd REI 120 doors Glss pnel L 300 x H 400 REI 60 or REI 120 Glss pnel L 400 x H 600 REI 60 or REI 120 Wll opening (FM H) min.1775 A 300 min. Wll opening (FM H) min.1775 A 300 min. (FM L / L1 / L2) A = 1350 FM H A = 1450 FM H 2150 Glss pnel L 400 x H 1200 REI 60 or REI 120 (FM L / L1 / L2) A = 1150 FM H A = 1250 FM H 2150 Glss pnel Ø300 nd Ø400 REI 60 or REI 120 Wll opening (FM H) min min. min.300 A Wll opening (FM H) min.2050 (FM L / L1 / L2) Ø Glss 300 min. A If requested rectngulr glss (REI 60 or REI 120) pnels with screw-in holding frmes my e fitted to oth single- nd doulelef firedoors. Dimensions my e stndrd, s illustrted ove, or else to order, with regrd to the dimensionl limittions of this glss the dimensions of the edge should lso e tken into considertion in ccordnce with the specifictions on the models/certifictes pge of current ctlogue. The term edge refers to the distnce etween the structurl opening of the door nd the glss in its frme. The glss pnels re supplied mounted nd seled. Circulr windows cn e pplied to doors prepred for screw fixing nd those fitted with clmp frmes for instlltion in plsterord wlls. For troule-free opertion we recommend the fitting of door closer to ll doors contining glss pnels of more thn 0,25 m 2 surfce re. The fitting of door closer is compulsory if the result of the following formule is exceeded: door width x door height x 35 + (width x height window x 17) * = mx. 140 for REI 60 doors door width x door height x 45 + (width x height window x 84) ** = mx. 140 for REI 120 doors The vlues to e entered in the clcultion tle re linel metres For circulr windows insert the following vlues : * for circulr windows Ø 300 = 2, for circulr windows Ø 400 = 3; for doors REI 60 ** for circulr windows Ø 300 = 6, for circulr windows Ø 400 = 10; for doors REI 120 The dimensions of glss pnels hve to e re-considered when used together with SLASH emergency hndles. Cution: REI glss pnels ecome opque if exposed to the sun-rys or other tmospheric gents, oth during storing nd instlltion. Fire rted glss, due to its production process, my hve some esthetic defects which cnnot e climed y the customer. 79 (FM L / L1 / L2) A = 550 FM H A = 650 FM H 2150 FM L / L1 / L2 FM H = FM H 2150 Glss Ø300 min. 900 A = 1600 A = 1600 Glss Ø400 min A = 1550 A = 1600

81 _GB.fh :32 Uhr Seite 2 SECTIONS-GLASS PANELS Proget REI 60 nd REI 120 doors Edge Glss. dim. L x H Edge Glss. dim. L x H Wll opening Wll opening Horizontl section of rectngulr window with REI 60 glss Horizontl section of rectngulr window with REI 120 glss Edge Glss. dim. Ød Edge Glss. dim. Ød Wll opening Wll opening Horizontl section of circulr window with REI 60 glss Horizontl section of circulr window with REI 120 glss 80

82 _GB.fh :32 Uhr Seite 3 ACCESSORIES Door closer nd crrier rm for Proget doors CP1 CP1 rck-operted over-hed door closer with dul regultion, for closing speed nd for closing impct. Colour silver. Tension djustle from 3 to 4. pprox CP2 CP2-EMF 52 CP2 rck-operted over-hed door closer with ril nd closingspeed regultion. Colour silver. Strenght EN 4. Doors ordered with CP2 re supplied with holes for the ppliction of door closer on the door lef nd guide ril on the frme, the ccessories themselves re supplied pcked for instlltion on site. NB. The mximum lef-opening = 170 Door closer CP2-EMF hs, compred to CP2, n electromgnetic locking device which permits the fixing of the door lef in n open position nd regultes the ngle of closing from 80 to 120 mx. Secondry lef Min lef Crrier rm Firedoors prepred for the fitting of M14 hndles or TW A or SL A emergency hndles re supplied with crrier rm (not instlled) which ctivtes the closing regultor if only the secondry lef is pushed. 81

83 _GB.fh :32 Uhr Seite 4 ACCESSORIES Sequencers for Proget doors RC/STD Horizontl section RC/STD closing regultor (sequencer) with uilt-in impct dmper for doule-lef doors. Inserted in wether stripping cvity in frme hed. RC2 - RC2-EMF1 Horizontl section RC2 closing regultor, complete set of 2 CP2 rck-operted door closers with control system incorported in ril. Minimum wll opening 1200 mm. Colour silver. Strenght EN 4. Doors ordered with closing regultors re supplied prepred oth on lef nd frme. Closing regultors re clssified s ccessories nd re supplied not instlled NB. The mximum lef-opening = 170. Closing system RC2-EMF1 hs, compred to RC2, n electro-meccnicl locking device which enles the locking of the door lef in the open position. NB. The locking point of principl door lef cn e regulted t ny position up to 130, t the sme time the secondry lef cn e regulted from 80 to 130 mx. 82

84 _GB.fh :32 Uhr Seite 5 ACCESSORIES Specil ccessories for Proget doors FF lck ruer wether stripping to e inserted into the specil cvity provided on the frme nd on the centrl jm of the secondry lef in the cse of doule-lef doors. Supplied only on request nd in loose rolls for cutting nd fitting on site All doors re supplied without CIL cylinders. These re supplied only on request or together with emergency hndles nd HOT CIL hndle. Ech cylinder comes with 3 keys, either with its own individul numer or s prt of system with mster key Automtic sill sel to instll on the externl prt of the lef opposite to the hinges, for etter sound insultion. Wll opening mx. 1340/min lef 1270/sec.lef Wll opening min. 500/min lef 406/sec.lef 230 Stined stinless steel INOX kick-pltes, thickness 10/10 mm to e instlled with dhesive tpe t the ottom prt of door.supplied on request for single nd doule lef doors (indicte side of instlltion). Stined, stinless steel INOX pltes, thickness 10/10 mm, to e instlled with dhesive tpe t the door lef, t hndle height. Supplied on request for single-nd doule-lef doors (indicte side of instlltion). 26 Dropper of glvnised steel-sheet to instll externlly t ottom prt, finishing like door

85 _GB.fh :32 Uhr Seite 6 FRAME EXTENSIONS/APPLICATIONS Proget doors Wll covering glvnized steel glss holding frme prts IM (1) which cn e ssemled with 45 degree corner joint, with thickness of 15/10 mm. Thermlly powder coted with epoxy polyester with n nti-scrtch eten finish drk pstel turquiose tone (NCS5020-B50G), or RAL finish on request.to e fixed with screws nd plugs. Fixing holes prepred on request however delivery is without the necessry screws nd plugs. Delivery upon request nd does not include screws/expnsion screws. Wll covering glvnized steel glss holding frme prts IM (4) which cn e ssemled with 90 degree corner joint, with thickness of 15/10 mm. Thermlly powder coted with epoxy polyester with n nti-scrtch eten finish drk pstel turquiose tone (NCS5020-B50G), or RAL finish on request.to e fixed with screws nd plugs. Fixing holes prepred on request however delivery is without the necessry screws nd plugs. Delivery upon request nd does not include screws. Holes re not prepred. We recommend this comintion with closing sel on the finished floor. Emrcing frme mde of glvnized steel-sheet profile, with thickness of 15/10 mm for single nd doule lef PROGET multipurpose door. Supplied in 3 pieces with 45 cutted corners to join with screws, finishing with powder cotings, nylon wrpping. Indicte the wll type nd the wll thickness in the order form (from 100 to 400mm) Order dimensions = FM Frme dpted for instlltion in wll opening for Multiuso PROGET with one or two doors in glvnised sheet steel with thickness of 15/10 mm with sels for on-site instlltion, reinforcement rs, fixing holes nd covering plugs. Order dimensions = FM min

86 _GB.fh :32 Uhr Seite 7 SURFACE FINISHING Proget doors Doors re supplied with pint finish s descried herein. The pint is prticulrly hrd-wering nd is chrcterized y its ttrctive finish. It is suitle for indoor use. The stndrd colours of the frme nd the door lef re pproximtely those illustrted t side. For repinting proceed s follows: - snd nd dust off the surfces thoroughly - give se cot of opque eige 0059(mde y ALCEA of Miln) 2-component epoxy pint EPOX repint the surfces with the enmel or pint selected The door must not e exposed to tmospheric gents. The colour fdes when exposed to direct sunlight. List of RAL tones t stock RAL 9010 RAL 1013 RAL 9001 RAL 9002 RAL 9018 RAL 1003 RAL 1015 RAL 3000 RAL 5010 RAL 5024 RAL 6000 RAL 6005 RAL 7024 RAL 7035 RAL 7038 RAL 8011 RAL 9011 Other RAL tones upon request: RAL1001-RAL1007-RAL1014-RAL1021-RAL1023-RAL1033-RAL2010-RAL3003-RAL3004- RAL3009-RAL3011-RAL3020-RAL5000-RAL5002-RAL5003-RAL5005-RAL5007-RAL5008-RAL5009-RAL5011-RAL5012- RAL5013-RAL5014-RAL5015-RAL5017-RAL6011-RAL6012-RAL6016-RAL6018-RAL6019-RAL6028-RAL6029-RAL7001-RAL7004- RAL7011-RAL7016-RAL7022-RAL7030-RAL7032-RAL7036-RAL7037-RAL7040-RAL7042-RAL7046-RAL7047-RAL8014-RAL8017- RAL8019-RAL8023-RAL9005 RAL-tones for outside using: RAL1001-RAL1003-RAL1013-RAL1021-RAL1023-RAL3000-RAL3012-RAL3013-RAL5010- RAL5011-RAL5014-RAL6000-RAL6005-RAL6018-RAL6028-RAL7001-RAL7012-RAL7022-RAL7024-RAL7032-RAL7035-RAL7036- RAL7037-RAL8017-RAL9001-RAL9002-RAL9010-NCS4020-NCS5020 We recommend the use of wter nd neutrl sop. Do not use clening fluids or other solvents. We do not ccept responsiility for future complints should these recommendtions not e dhered to. (For printing resons the colours might not e like the originl ones) 85

87 _GB.fh :32 Uhr Seite 8 DETECTORS/ELECTROMAGNETS The C1 power nd control device supplies 24 V power feed to the electromgnets tht hold the fire doors open. If n lrm is generted y the ssocited smoke nd het detector, the device switches off this feed to relese the doors. The system cn e reset either utomticlly of mnully, y pressing the reset utton once the lrm condition is eliminted. The C1 power nd control device cn work with up to six EM or EMP electromgnets nd 20 RFC* smoke nd het detectors. It cn lso drive n externl lrm siren. The device cn e connected to n externl ckup ttery. The C1 control device is certified ccording to the electromgnetic comptiility nd electricl sfety stndrds ppliction. ABS ox in eige colour for wll fixing. Power supply: 230Vc 50Hz Control voltge: 24Vdc Mx. output current: 500mA Protection rting: IP30 Bckup ttery chrge output: 24Vdc (27.6Vdc) Power on signl: Green LED Alrm signl: Red LED Fult signl: Yellow LED Acoustic lrm: Internl uzzer Low Bttery wrning: Intermittent internl uzzer C RFC* Ø126 EM wll-mounted electro-mgnet with white plstic csing, complete with relese utton. Anchor mde of nickle iron pltes with hinged se. EM Power source: 24Vdc Asorption: 60mA Retention strenght: 550N Mrked: CE EMP RFC* smoke nd het detector without ioniztion chmer or ny other system lile to emit rdition, with white coloured plstic ox. The detector is designed to mesure rpid increses in temperture (>10 C) in the wrm ir tht flows horizontlly cross the ceiling. The detector should e locted where there re normlly no strong drughts. The RFC* smoke nd het detector is certified to UNI EN 54-7 stndrd. Operting voltge: 10.5V 33V, typiclly 24V Stndy consumption: 62μA - 70μA, typiclly 65μA Fixed ctivtion temperture: 54 C - 65 C, typiclly 60 C Operting temperture rnge: -0 C +70 C Mx. reltive humidity: 95% Wrning signl: Red LED 56 Electro mgnet EMP for floor fitting consisting of glvnized iron core with lock relese utton nd instlltion se. Anchor mde of nickle iron pltes with hinged se. Power source: 24Vdc Asorption: 60mA Retention strength: 550N Mrked: CE 86

88 _GB.fh :32 Uhr Seite 9 ELECTRIC HANDLE ELM TWIST ELM SLASH ELM TAURUS INOX ELM Multi-voltge electro hndle for controlled opening system, mnufctured with metllic ody nd luminium hndle vrnished in lck colour. Controlled opening system for the door tht through n electronic device will switch on the hndle. The supply could it e indifferently 12 Vdc, 12 Vc, 24 Vdc nd 24 Vc. in rush strting current 700mA, mintennce current 500mA. Supplied with internl timer: 30 seconds opening permission length; when the green Led is on it mens tht there is temporry ctivtion. The customer my lso choice the time for the temporry ctivtion. The supply cle is pssing through the inside of the door lef nd it is wired to the electric contct of the lef (height from the finished floor: 850 mm). Electro hndles re supplied in thier component prts, not fitted. The opposite side of the electro hndle is comptile with vrious opening systems here in succession shown. Function of the ELECTRO-DOOR-HANDLE comined with emergency hndle. The opening direction is only the pull direction (on the electro-door-hndle door lef). When locked with key the electro-door hndle is set out of ction while the push side is lwys operle y mens of the nti-pnic r. Appliction: Single nd doule door lefs for emergency exits nd where controlled ccess is required on the pull side. 87

89 _GB.fh :32 Uhr Seite 10 ELECTRIC HANDLE ELM Function of the ELECTRO-DOOR-HANDLE comined with door hndle MSC. The controlled opening direction cn e push or pull in ccordnce with the loction of the electro-door-hndle. Should the door e locked with key oth the electro-door-hndle nd the hndle re set out of ction. Appliction: Single nd doule lef doors where controlled ccess is required in one of the two directions of opening, ut lso key locking to prevent through trffic t times when ccess is not permitted. Function of the ELECTRO-DOOR-HANDLE comined with door hndle MCC/S. The controlled opening direction is only pull (the door lef with the electro-door-hndle). Should the door e locked with key, only the door hndle MCC/S (door lef push) is set out of ction ut not the electro-door-hndle. Appliction: Single nd doule lef doors where controlled ccess is required only on the pull door lef, while ccess through the push door lef is only possile if the door is not key locked. Function of the ELECTRO-DOOR-HANDLE comined with door hndle MCC/T The controlled opening direction is only push (the door lef with the electro-door-hndle). Should the door e locked with key, only the door hndle MCC/T (door lef pull) is set out of ction ut not the electro-door-hndle. Appliction: Single nd doule lef doors where controlled ccess is required only on the push door lef, while ccess through the pull door lef is only possile if the door is not key locked. Function of the ELECTRO-DOOR-HANDLE comined with door hndle MCC/A Locking the lock with key prevents the functioning of the electro door hndle (push door lef), with lef hndle MCC/A exit is lwys grnteed even if the lock is locked y key (nti pnic function). Appliction: Single nd doule lef doors where controlled ccess is required only on the push door lef, while ccess through the pull door lef is only possile if the door is not key locked. 88

90 _GB.fh :32 Uhr Seite 11 CONTROLLED OPENING/LOCK 3 CLOSING POINTS DRAW. A 01 A DRAW. B A 01 A A A-A pprox Controlled opening system with nti-pnic crossr (Drwing A) or with hndle (Drwing B). The door is kept closed y the electromgnet nd y the tongue of the lock. Opening from outside y mens of mgnetic crd nd y moving ck the tongue with hndle or with key. From inside the electromgned is relesed y utton (lso remote), microswitch inserted in the ntipnic crossr or lso y mgnetic crd, the tongue of lock must e moved ck (with crossr, hndle or key). 01 holding electromgnet 300 kg.complete of joined nchoring nd (08) fstening plte; 02 Control system with progrmming crds; 03 AC/DC Converter 220V/12V; 04 Relese switch; 05 TW or SL equipped with microswitch; 06 Wire tue in nickel-plted rss; 07 Simple mgnetic coded crd; Lock with 3 closing points on jm for Proget multipurpose doors. Comined with cylinder nd M1 lever-hndle inside nd outside, or in the ntipnic version BM with lever hndle outside, B outside completely lind nd ntipnic crossr Twist TW, Slsh SL, Turus Inox TX or Touchr TB internlly. Cn e delivered lso on min lef of doule lef doors. 89

91 _GB.fh :32 Uhr Seite 1 REVER MULTIPURPOSE DOORS INDEX MULTIPURPOSE DOORS REVER PAGE REVER MULTIPURPOSE DOORS INDEX 90 SPECIFICATIONS/SECTIONS - MULTIPURPOSE SINGLE-LEAF DOORS 91 SPECIFICATIONS/SECTIONS - MULTIPURPOSE DOUBLE-LEAF DOORS 92 ACCESSORIES - REVER MULTIPURPOSE DOORS ADDITIONS - REVER MULTIUPURPOSE DOORS 95 SURFACE FINISHING/POSITION OF BRACKETS/FRAME EXTENSIONS 96 Ninz compny mintins the right to introduce technicl modifictions ny time without notice. All dimensions expressed in mm. Rever doors re normlly instlled to comprtmentlize the inside of uildings nd re uilt for tht purpose. 90

92 _GB.fh :32 Uhr Seite 2 SPECIFICATIONS/SECTIONS Rever MULTIPURPOSE single-lef doors Wll opening (FM H) Net pssge = FM H - 40 Externl frme = FM H + 8 Verticl Sections With floor-prt frme FFL 32 Rever MULTIPURPOSE single-lef doors consisting of: Glvnised steel-sheet door lef, filler of rigid honey-com fire structure, totl thickness 39 mm. Assemled corner frme mde of profiled glvnised steelsheet prepred for instlltion with rckets or olts. Lock with cylinder ore nd plstic key-hole for ptent key included. Blck colour sfety-shped hndle fitted t height of pprox. 1075/1125 (FM H 2050/FM H 2150) ove the finished floor. 2 pcs. Bering hinges nd 3 sfety olts on hinge side. Pinted with epoxy-polyester oven-ked powder pint with nti-scrtch goffered finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door lef is crried out using oven-ked epoxy-polyester powder nd grphic printing of the decortion on the flt side of the door lef y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. Reversile door for opening right or left with ottom frme dptle to floor or detchle for use without ottom frme. All Rever doors re prepred to receive three-point closing device (Kit Secur). Dimensions wll opening FM L x FM H ville: 700 x 2050/ x 2050/ x 2050/ x 2050/ x 2050/2150 NB. To request the doors cn e supplied in different RAL tones, comined with nti-pnic crossrs, door-closers, ventiltion holes, louvers, frme extensions or specil csings. Horizontl Sections Net pssge = FM L Wll opening (FM L) Externl frme = FM L

93 _GB.fh :32 Uhr Seite 3 SPECIFICATIONS/SECTIONS Rever MULTIPURPOSE doule-lef doors Rever MULTIPURPOSE doule-lef doors consisting of: Lef of glvnised steel-sheet, filler of rigid honey-com fire structure, totl thickness 39 mm. Corner frme mde of profiled glvnised steel-sheet prepred for instlltion with rckets or olts The frme is supplied non-ssemled. Stndrd lock in min lef with cylinder ore nd keyhole for ptent keys. Secondry lef with centrl mnul olts for closing t top nd ottom. Blck colour sfety-shped hndle fitted t height of pprox. 1075/1125 (FM H 2050/FM H 2150) ove the finished floor. Ech lef with 2 ering hinges nd 3 sfety olts t hinge side. Wll opening (FM H) Net pssge = FM H - 40 Externl frme = FM H + 8 Verticl Sections With floor-prt frme FFL 32 Pinted with epoxy-polyester oven-ked powder pint with nti-scrtch goffered finish - light pstel turquoise for door leves (NCS4020-B50G), nd drker shde for the frme (NCS5020-B50G). On request, powder coting in RAL or decortive NDD Ninz Digitl Decor cn e pplied for decortive or grphic elements. Surfce tretment of the door leves is crried out using oven-ked epoxypolyester powder nd grphic printing of the decortion on the flt side of the door leves y mens of spryed inks. The decortion is protected y trnsprent vrnish. The finish cn e flt or eten in ccordnce with the decortion selected. Reversile door for opening right or left with ottom frme dptle to floor or detchle for use without ottom frme. All Rever doors re prepred to receive three-point closing device (Kit Secur). Horizontl Sections Net pssge = FM L NP min lef = L1-74 Floor ctch set 44 Dimensions wll opening FM L x FM H ville: 1200 ( ) x 2050/ ( ) x 2050/ ( ) x 2050/ ( ) x 2050/ ( ) x 2050/ ( ) x 2050/2150 L2 Wll opening (FM L) L1 Externl frme = FM L + 22 NB. To request the doors cn e supplied in different RAL tones, comined with ntipnic crossrs, door-closers, ventiltion holes, louvers, frme extensions or specil csings. 92

94 _GB.fh :32 Uhr Seite 4 ACCESSORIES Rever MULTIPURPOSE doors Glss pnels Ø300 FM L min. = 700 Glss pnels Ø400 FM L min. = 800 Glss pnels 300 x 500 FM L min. = 700 Glss pnels 400 x 700 FM L min. = Sections glss pnels Dim. gl. pnels Vision pnel for single nd doule lef REVER doors mde with ruer EPDM outer profile lck colour nd lminted 3+3 trnsprent sfety glss. Opening direction of door necessry Ventiltion holes for single nd min lef of doule lef REVER doors y sheet-holing like shown in picture, ir pssge pprox. 200 squre cm. Rever doors with ventiltion holes mintin the reversiility. 15 Closing point REVER SECUR version of single lef door nd min lef of doule lef doors with 3 points closing lock including europen cylinder. Aville lso in kit secur for site-instlltion. Rever Secur doors mintin the reversiility. Opening left (SX) Opening right (DX) 93

95 _GB.fh :32 Uhr Seite 5 ACCESSOIRES Rever MULTIPURPOSE doors Anti-pnic crossrs TWIST model mde of steel nd protection mteril mde of lck plstic, luminium r nturlly nodised - encumrnce 100 mm. Types BM - BSP - BS - BMC nd BC to instll on single lef doors or on min lef, type A for secondry lef. Aville lso in kit for site-instlltion. Turus stinless steel (TX) with stinless steel control ox nd r. Series TWIST TAURUS INOX TW BM TW BSP TW BS TW BMC TW BC TW A for secondry lef Anti-pnic crossrs SLASH model mde of steel nd protection mteril mde of lck plstic, luminium r nturlly nodised - encumrnce 75 mm. Types BM - BSP - BS - BMC nd BC to instll on single lef doors or on min lef, type A for secondry lef. Aville lso in kit for site-instlltion. Series SLASH SL BM SL BSP SL BS SL BMC SL BC SL A for secondry lef pprox. 290 Ruer gsket FF lck colour to insert y pressing in the gp of the frme. Supplied to request only in loose rolls to cut nd instll t site. 51 Overhed doorcloser CP1 with compss rm with dul regultion for closing speed nd impct. Silver colour. Air vent grill, lck or white s requested, dimensions 482 x 99 mm (ir pssge pprox. 150 cm 2 ). Indicte the opening direction of the door. 94

96 _GB.fh :32 Uhr Seite 6 ADDITIONS Rever MULTIPURPOSE doors Hole to prepre Order dimension Net pssge pprox * Wll thickness Emrcing door csing SPEED for Rever door to ssemle t site, glvnised steel sheet thickness 1,25 mm to grsp on finished prtition with 6 integrted wrenches nd 2 distncers to olt or screw-on, including the ruer gsket nd the RAL tone finishing. Profile 55/70. FM = Wll opening order dimension for stndrd REVER door single nd doule lef. Order dimension Hole to prepre* Net pssge FM L (width) FM L + 20 FM L - 64 FM H (height) FM H + 10 FM H - 34 Hole to prepre Order dimension Net pssge pprox Wll thickness Emrcing door csing SOLID for Rever door to ssemle t site, glvnised steel sheet thickness 1,25 mm to fix y mortr or with iron nd to olt or screw-on, including removle ottom distncer, ruer gsket nd RAL tone finishing. Profile 45/45. FM = Wll opening order dimension for stndrd REVER door single nd doule lef. Order dimension Hole to prepre* Net pssge FM L (width) FM L + 40 FM L - 64 FM H (height) FM H + 20 FM H - 34 Hole to prepre Order dimension Net pssge pprox * Wll thickness Telescopic emrcing door csing TESCOP for Rever doors in two pieces, glvnised steel sheet thickness 1,25 mm to olt on finished prtition, including removle ottom distncer, ruer gsket nd RAL tone finishing. Profile 55/70. FM = Wll opening order dimension for stndrd REVER door single nd doule lef. Order dimension Hole to prepre* Net pssge FM L (width) FM L + 20 FM L - 64 FM H (height) FM H + 10 FM H - 34 Wll opening Net pssge 48 Wll thickness pprox. 15 Glss holders for wll covering to e ssemled for REVER doors, mde of glvnized sheet steel with thickness oft 12/10 mm. Angled sel to e screwed. Thermlly epoxy polyester powder coted. Pcking included. The fixing holes re the customer s responsiility. Delivery upon request nd does not include screws. Holes re not prepred. FM = Wll opening order dimension for stndrd REVER door single nd doule lef. Order dimension Net pssge FM L (width) FM L - 74 FM H (height) FM H - 40 * Removing with chisel or other tool prt of existing cement wlls or ricks or su-frmes of wood, 10 mm width my e gined. 95

97 _GB.fh :32 Uhr Seite 7 SURFACE FINISHING/POSITION OF BRACKETS/FRAME EXTENSIONS Rever MULTIPURPOSE doors Colours lwys ville RAL9010 RAL 9018 RAL5010 RAL7024 RAL9011 RAL1013 RAL1003 RAL5024 RAL7035 RAL9001 RAL 1015 RAL6000 RAL7038 Seril colour RAL9002 RAL3000 RAL6005 RAL8011 Doors re supplied with pint finish s descried herein. The pint is prticulrly hrd-wering nd is chrcterized y its ttrctive finish. It is suitle for indoor use. The stndrd colours of the frme nd the door lef re pproximtely those illustrted t side. For repinting proceed s follows: - snd nd dust off the surfces thoroughly - give se cot of opque eige 0059 (mde y ALCEA of Miln) 2-component epoxy pint EPOX repint the surfces with the enmel or pint selected. The door must not e ex-posed to tmospheric gents. The colour fdes when ex-posed to direct sunlight. (For printing resons the colours might not e like the originl ones) Other RAL tones upon request: RAL1001-RAL1007-RAL1014-RAL1021-RAL1023-RAL1033-RAL2010-RAL3003-RAL3004-RAL3009-RAL3011-RAL3020-RAL5000- RAL5002-RAL5003-RAL5005-RAL5007-RAL5008-RAL5009-RAL5011-RAL5012-RAL5013-RAL5014-RAL5015-RAL5017-RAL6011-RAL6012-RAL6016-RAL6018-RAL6019- RAL6028-RAL6029-RAL7001-RAL7004-RAL7011-RAL7016-RAL7022-RAL7030-RAL7032-RAL7036-RAL7037-RAL7040-RAL7042-RAL7046-RAL7047-RAL8014-RAL8017- RAL8019-RAL8023-RAL9005 RAL-tones for outside use: RAL1001-RAL1003-RAL1013-RAL1021-RAL1023-RAL3000-RAL3012-RAL3013-RAL5010-RAL5011-RAL5014-RAL6000-RAL6005-RAL6018- RAL6028-RAL7001-RAL7012-RAL7022-RAL7024-RAL7032-RAL7035-RAL7036-RAL7037-RAL8017-RAL9001-RAL9002-RAL9010-NCS4020-NCS5020 We recommend the use of wter nd neutrl sop. Do not use clening fluids or other solvents. We do not ccept responsiility for future complints should these recommendtions not e dhered to. Wll opening (FM L) Wll opening (FM L) Wll opening (FM L) 1/2 1/2 L2-280 L1-280 L1-280 L Wll opening (FM H) FM H 2 FFL Wll opening (FM H) FFL -8 FM H Wll opening (FM H) FFL -8 FM H Brckets position for single-lef doors opening right nd left (DX - SX) Brckets position for doule-lef doors opening right (DX) Brckets position for doule-lef doors opening left (SX) Encumrnces for single-lef doors Encumrnces for doule-lef doors Height of hndle = FM H 1/ Door with CP2 not openle to 180 Height of hndle = FM H 1/ Door with CP2 or RC2 not openle to 180 A TW = 110 A TW = 110 SL = 75 FM L -4 Wll opening (FM L) SL = 75 TX 130 TX 130 Wll opening (FM L) A TB = 74 A TB = FM L L1-4 L1 L2 L2 +42 Side-prt. min L1-221 Side-prt. min A FM L FM L +11 A L1-206 L1 +11 L

98 _GB.fh :32 Uhr Seite 8 97

99 _GB.fh :09 Uhr Seite 1 HINGED DOORS VERTICAL SLIDING DOORS SLIDING DOORS REI REI

100 _GB.fh :09 Uhr Seite 2 DOORS INDEX PAGE IDOORS INDEX 99 ILLUSTRATIONS 100 SPECIFICATIONS DOUBLE-LEAF REI 120 HINGED DOORS 101 SECTIONS DOUBLE-LEAF REI 120 HINGED DOORS 102 ENCUMBRANCES DOUBLE-LEAF REI 120 HINGED DOORS 103 SPECIFICATIONS / SECTIONS REI 120 VERTICAL SLIDING DOORS 104 SPECIFICATIONS REI 120 SINGLE-LEAF SLIDING DOORS 105 SECTIONS - REI 120 SINGLE-LEAF SLIDING DOORS 106 SPECIFICATIONS REI 180 SINGLE-LEAF SLIDING DOORS 107 SECTIONS - REI 180 SINGLE-LEAF SLIDING DOORS 108 SPECIFICATIONS REI 120 DOUBLE-LEAF SLIDING DOORS 109 SECTIONS - REI 120 DOUBLE-LEAF SLIDING DOORS 110 DESCRIPTIONS REI120 TELESCOPIC SLIDING DOORS 111 SECTIONS REI120 TELESCOPIC SLIDING DOORS 112 WORKING SYSTEMS THERMAL FUSE OR ELECTROMAGNETS 113 OPTIONALS RETURNED COUNTERWEIGHT AND BRAKING DEVICE 114 OPTIONALS 115 Fireproof doors, ecuse of their dimensions nd specific functions hve to e crefully plnned. All the mesurements of ny instlltion plce hve to e tken nd the verticlity of wlls nd floor levels hve to e verified. Prticulr ttention must e pid to the mesurement of ny projections or surfces tht could inhiit the functioning or the free movement of the door. In view of the weight of the doors, the ering cpcity of the wlls nd of the supporting ems must lso e verified, nd these must lso e suitle for the fixing of rils nd frmes. Our technicl office, is t your disposl for ny other explntion tht my e required, nd holds the forms for orders or offers. Ninz compny keeps the right to introduce technicl modifictions ny time without notice. All dimensions expressed in mm. Fire rek doors re normlly instlled to comprtmentlize the inside of uildings nd for tht purpose they re uilt. 99

101 _GB.fh :09 Uhr Seite 3 ILLUSTRATIONS Firerek doors re ville in single nd doule lef horizontl sliding or hinged versions nd s drop shutter, certified for integrity nd insultion ccording to the Itlin UNI 9723 norm nd pproved y the Ministry of Interior. They re used principlly for lrge openings or prticulr situtions nd uilt to order dimensions. The leves consist of steel sheets with fire resistnt core in verticl modules with flush joints. Color light pstel turquoise 100

102 _GB.fh :09 Uhr Seite 4 SPECIFICATIONS Doule-lef REI 120 hinged doors Doule-lef REI 120 hinged door in ccordnce with UNI9723 consisting of: One piece leves of joined moduls mde of steel-sheet, core with insulting mterils. Flush joints, without sill. Totl thickness 73mm. Corner frme of Z profiled steel-sheet with nchors for instlltion. Lock with cylinder on min lef. Blck, dul-lever sfety hndle with steel core, nd pltes. Secondry lef including self-locking mechnism t top nd floor. 2 extr-strong hinges for ech lef. Self expnding gsket inserted in the edge of leves. Identifiction plte with reference detils on one lef edge. Mximum opening through 150 with door closer. Thermlly epoxy polyester powder coted, with eten nti-scrtch finish, pstel turquoise - light tone (NCS4020-B50G) for doors with mximum height of 4500 mm. A eten nti-scrtch finish, pstel turquoise light tone for doors with height of more thn 4500 mm. Dimensions on request. Compulsory ccessories: 1 door closer for lef. 1 sequencer to ensure the correct closing sequence of the leves. Weight of door pprox. 60 kg/m 2 of wll opening. Pcking: Door lef in one piece in metl continers or on disposle timer pllets. N.B. - FFL = Finished floor level. - Cution: leves re supplied in one piece, this must e considered for hndling nd ringing to instlltion plce. - All orders re crried out in ccordnce with the RAL colour rnge s listed for Proget doors. The client must e wre tht ccording to decrees 626 dted nd 242 dted ll doors used for emergency wys or exits must hve minimum height of 2000 mm. (= wll opening 2050 mm). Appliction of revolving door s n emergency exit is t the customer s risk. For prticulr on site situtions (e.g. ir drughts) it my e necessry to fit two door closers in pirs on ech door lef. One door closer per door lef is included in the price of the element, the price of the second door closer must e dded. Opening left (SX) Opening right (DX) Min lef Secondry lef Secondry lef Min lef 101

103 _GB.fh :09 Uhr Seite 5 SECTIONS Doule-lef REI 120 hinged doors B 27 B-B A A Net pssge = H - 50 Wll opening = H Externl frme = H + 40 B FFL Net pssge = L L A-A Wll opening = L 40 Externl frme = L

104 _GB.fh :09 Uhr Seite 6 ENCUMBRANCES Doule-lef REI 120 hinged doors Mximum dimensions for doule-lef doors opening to 90. N.B.: Mximum open Wll opening (L) 40 L2 = secondry lef portion L1 = min lef portion A 175 X Y Z 20 X = L1 +47 Y = L2 +67 Z = L1-250 A emergency hndle TWIST or CISA = 100 Height of hndle

105 _GB.fh :09 Uhr Seite 7 SPECIFICATIONS/SECTIONS REI 120 verticl sliding doors REI 120 verticl sliding door in ccordnce with UNI9723 consisting of: One piece door lef with continul eten sheet steel pnels filled with insultion mteril. Door lef thickness 80 mm. Firm pressure-formed steel-sheet lyrinths; door runs on lterl rils nd flme-proof low-friction rresters. Adjustle counterweights. Recessed hndles locted on the lower prt on oth sides. Thermoexpnding gsket on ll lyrinths. Identifiction plte with reference detils on hndle. Finishing with primer cot oven-dried t 160, in light pstel turquoise. Dimensions on request. Norml opertion: The door remins in the open position, held y therml fuse locted t the top on the lyrinth distncer. The door cn e closed mnully. In cse of fire the door closes s soon s the therml fuse reks. The door my lso e fitted with electromgnets if the customer requests it. Electromgnets medium size: -Nominl tension: 24V.d.c. -Nominl current: 125mA -Retin strenght: 600N Electromgnets ig size: -Nominl tension: 24V.d.c. -Nominl current: 200mA -Retin strenght: 1400N The fitting of ny other ccessories normlly depends on the dimensions of the door. N.B. - Minimum wll opennig = 300mm x 500mm. - All colours in the RAL rnge re ville to order. Wll open. = H (min.500) H * Verticl sections Externl frme min.1225 Room Shelf t customer s expense Wll opening = L Horizontl sections * 200* Externl frme * Vrile dimensions for lrge doors. 104

106 _GB.fh :09 Uhr Seite 8 SPECIFICATIONS REI 120 single-lef sliding doors REI 120 single-lef sliding door in ccordnce with UNI9723 consisting of: To instll on weight-ering wll or insulted steel em or insulted steel structure. One piece door lef with continul eten sheet steel pnels filled with insultion mteril. Screw ssemly. Door lef thickness 80 mm. Horizontl, pressure-formed steel-sheet ril, pre-drilled for fixing with expnsion screws (not included). Top low friction-sliding trolley mechnism, with olt outside wll opening on floor. A pressure-formed steel-sheet protection covers the top running guide. Pressure-formed sheet-steel lyrinths. Adjustle counterweight covered with pressure-formed steel-sheet gurd with cvity for door edge. Recessed hndles on oth sides. Thermoexpnding gsket on ll lyrinths nd under door lef. Identifiction plte with reference detils direct on hndle. Finished, with rimer cot oven-dried t 160, in light pstel turquoise tone. Pcking: in disposle metl continers. Dimensions to request. Working of series-produced doors with therml fuse: The door remins in ny position, s it is left. The counterweight remins connected to the therml fuse nd closes the door only if the fuse reks. Working of doors ordered with electromgnets (to request): The door remins normlly open. The counterweight is lwys pulling the door lef nd the door closes when the current to the electromgnets is interrupted. For resons of sfety ll doors equipped with electromgnets must lso e fitted with rking device. Electromgnets for leves up to 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 125mA -Retin strenght: 600N Electromgnets for leves of more thn 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 200mA -Retin strenght: 1400N The fitting of ny other ccessories normlly depends on the dimensions of the door. Weight of sliding door pprox. 50 kg/m 2 of wll opening. N.B. - All colours in the RAL rnge re ville to order. - For resons of sfety we recommend the fitting of the rking mechnism to control the closing speed of the door. - FFL = Finished floor level. Opening left (SX) - single-lef door Opening right (DX) single-lef door 105

107 _GB.fh :09 Uhr Seite 9 SECTIONS REI 120 single-lef sliding doors Supporting em suitle for expnsion screws B B-B Supporting em A A Wll opening = H (min. 500) Room B INCLINATION OF RAIL 2mm/r.m. 120 FFL A-A * Wll opening = L L * Vrile dimensions for lrge doors. 106

108 _GB.fh :09 Uhr Seite 10 SPECIFICATIONS REI 180 single-lef sliding doors REI 180 single-lef sliding door in ccordnce with UNI9723 consisting of: To instll on weight-ering wll: One piece door lef with continul eten sheet steel pnels filled with insultion mteril. Screw ssemly. Door lef thickness 120 mm. Horizontl, pressure-formed steel-sheet ril, pre-drilled for fixing with expnsion screws (not included). Top low friction-sliding trolley mechnism, with olt outside wll opening on floor. A pressure-formed steel-sheet protection covers the top running guide. Pressure-formed sheet-steel lyrinths. Adjustle counterweight covered with pressure-formed steel-sheet gurd with cvity for door edge. Recessed hndles on oth sides. Thermoexpnding gsket on ll lyrinths nd under door lef. Identifiction plte with reference detils direct on hndle. Finished, with rimer cot oven-dried t 160, in light pstel turquoise tone. Pcking: in disposle metl continers. Dimensions to request. Working of series-produced doors with therml fuse: The door remins in ny position, s it is left. The counterweight remins connected to the therml fuse nd closes the door only if the fuse reks. Working of doors ordered with electromgnets (to request): The door remins normlly open. The counterweight is lwys pulling the door lef nd the door closes when the current to the electromgnets is interrupted. For resons of sfety ll doors equipped with electromgnets must lso e fitted with rking device. Electromgnets for leves up to 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 125mA -Retin strenght: 600N Electromgnets for leves of more thn 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 200mA -Retin strenght: 1400N The fitting of ny other ccessories normlly depends on the dimensions of the door. Weight of sliding door pprox. 75kg/m 2 of wll opening. N.B. - All colours in the RAL rnge re ville to order. - For resons of sfety we recommend the fitting of the rking mechnism to control the closing speed of the door. - FFL = Finished floor level. Opening left (SX) - single-lef doors Opening right (DX) - single-lef doors 107

109 _GB.fh :09 Uhr Seite 11 SECTIONS REI 180 single-lef sliding doors Supporting em suitle for expnsion screws B B-B ering em in rick or in reinforced concrete A A Wll opening = H (min. 500) Room B INCLINATION OF RAIL 2mm/r.m. 180 FFL A-A * Wll opening = L L * Vrile dimensions for lrge doors. 108

110 _GB.fh :09 Uhr Seite 12 SPECIFICATIONS REI 120 doule-lef sliding doors REI 120 doule-lef sliding door in ccordnce with UNI9723 consisting of: To instll on weight-ering wll or insulted steel em or insulted steel structure. One piece door lef with continul eten sheet steel pnels filled with insultion mteril. Screw ssemly. Door lef thickness 80 mm. Horizontl, pressure-formed steel-sheet ril, pre-drilled for fixing with expnsion screws (not included). Top low friction-sliding trolley mechnism, with olt outside wll opening on floor. A pressure-formed steel-sheet protection covers the top running guide. Pressure-formed sheet-steel lyrinths. Adjustle counterweights covered with pressure-formed, sheet-steel gurds. Recessed hndles on oth sides of the leves. Thermoexpnding gsket on ll lyrinths nd under door leves. Identifiction plte with reference detils direct on hndle. Finished, with primer cot oven-dried t 160, in light pstel turquoise tone. Pcking: in disposle metl continers. Dimensions to request. Working of series-produced doors with therml fuse: The door leves remin in ny position, s they re left. The counterweights remin connected to the therml fuses nd close the door only if the fuses rek. Working of doors ordered with electromgnets (to request): The leves remin normlly open. The counterweights re lwys pulling the door leves, nd close when the current to the electromgnets is interrupted. For resons of sfety ech lef of doors equipped with electromgnets must lso e fitted with rking device. Electromgnets for leves up to 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 125mA -Retin strenght: 600N Electromgnets for leves of more thn 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 200mA -Retin strenght: 1400N The fitting of ny other ccessories normlly depends on the dimensions of the door. Weight of sliding door pprox. 50 kg/m 2 of wll opening. N.B. - All colours in the RAL rnge re ville to order. - For resons of sfety we recommend the fitting of the rking mechnism to control the closing speed of the door. - FFL = Finished floor level. Opening left Opening right 109

111 _GB.fh :09 Uhr Seite 13 SECTIONS REI 120 doule-lef sliding doors Supporting em suitle for expnsion screws B B-B 150 Supporting em 230 A A Wll opening = H (min. 500) Room B FFL Inclintion of ril 2 mm/r.m. 120 A-A 120 1/2 L min.* Wll opening = L 1/2 L min.* * Vrile dimensions for lrge doors. 110

112 _GB.fh :09 Uhr Seite 14 SPECIFICATIONS REI 120 telescopic sliding door REI 120 telescopic sliding door in ccordnce with UNI9723 consisting of: To e instlled in structurl wlls or from the ceiling. Continuous module door lef pnels constructed of eten sheet steel sndwich filled with insultion mteril. Screw ssemly. Totl thickness of the door lef 80 mm. Horizontl, pressure-formed steel-sheet ril, pre-drilled for fixing with expnsion screws (not included). Top low friction-sliding trolley mechnism, with olt outside wll opening on floor. A pressure-formed steel-sheet protection covers the top running guide. Pressure-formed sheet-steel lyrinths. Closing counter weight which cn e clirted, in protective pressure formed sheet steel cse with rete for the strike profile nd distnce spcer. Recessed door hndles on oth sides. Thermlly expnding sel locted on ll lyrinths nd under the door lef. Identifiction plte with reference detils direct on hndle. Finished, with primer cot oven-dried t 160, in light pstel turquoise tone. Pckging: modules in disposle metl continers. Dimensions to request. Function of stndrd doors with therml insultion mteril: When relesed the door remins sttionery regrdless of position. The counterweight remins ttched to the theml insultion mteril nd closes the door only when the mteril is dmged. Function of door elements with n electromgnet (on request): Normlly the door remins open. The counterweight remins ttched to the door lef nd the closing device closes ech time the electricl current from the electromgnet is interrupted. For sfety resons the customer must pply rking device to door elements equipped with electromgnets. Electromgnets for leves up to 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 125mA -Retin strenght: 600N Electromgnets for leves of more thn 12 m 2 : -Nominl tension: 24V.d.c. -Nominl current: 200mA -Retin strenght: 1400N The fitting of ny other ccessories normlly depends on the dimensions of the door. Sliding force is pprox. 50 kg/m 2 metre of wll opening. N.B. - All colours in the RAL rnge re ville to order. - For resons of sfety we recommend the fitting of the rking mechnism to control the closing speed of the door. - FFL = Finished floor level. Opening left (SX) single-lef door Opening right (DX) single-lef door 111

113 _GB.fh :09 Uhr Seite 15 SECTIONS REI 120 telescopic sliding door B Supporting em suitle for expnsion screws B-B Supporting em 230 A A Room B INCLINATION OF RAIL 2mm/r.m. Wll opening = H (min.500) FFL A-A * Wll opening = L L/ * Vrile dimensions in prticulr cses CHARACTERISTICS Mono-lterl Bi-lterl 112

114 _GB.fh :09 Uhr Seite 16 WORKING SYSTEMS Therml fuse or electromgnets 70 Cle Therml fuse SAM end uffer Door leves fitted with therml fuses re not ffected y the counterweight in norml use. The finl closing impct is sored y the dmper. L (Norml counterweight) L (Returnet counterweight) Plte Electromgnet E Stop Electricl connection Exit position of electric wire H +90 SAM end uffer Door leves fitted with electromgnets re lwys ffected y the counterweight. They cn e either held open y the electro-mgnet or pulled shut y the counterweight. 113

115 _GB.fh :09 Uhr Seite 17 OPTIONALS Returned counterweight nd rking device 70 Return pulley Sliding doors cn e supplied with returned counterweight on request, should the encumrnces t the closing side of the door mke it necessry. However, the 100 mm overlp of the lef must e gurnteed. Indicte in the orders NORMAL or SPECIAL joint. 100 min.130 NORMAL SPECIAL Brking device VT The fitting of rking device on ll doors is recommended in the interests of sfety. 114

116 _GB.fh :09 Uhr Seite 18 OPTIONALS On request sliding doors cn e fitted with night lock (not included in certificte). 1 2 Door elements with width of more thn (height H mm) x 2 must e fitted with pulley (1) to ensure the complete closing of the door. Stndrd pulley is used up to mximum width of (height H mm) x4. Specil pulley (2) equipped with multiplier re used up to mximum width of (height H mm) x 6. Encumrnce of protection cover pprox. 350 mm. FFL Room Bem in pssge Wll opening L A em with spn of 100 x 200 mm is pplicle for single nd doule lef sliding door elements in ccordnce with REI 120. The em is supplied prepred for the fixing to one side. With n L over 2500 mm lso, fixing to the ceiling is prepred. The covering of the em with two pnels of 12,5 mm plsterord is the responsiility of the customer. 1 2 Bem in pssge of 100 x 200 mm Plsterord pnels thickness 12,5 mm 5 Wll opening H Room Wrning: Encumrnce of the sliding ril to instll on insulted steel em = 230 mm. Encumrnce of the sliding ril to instll on reinforced concrete em = 230 mm. 3 Minerl wool 150 kg/mc 4 5 Fstening plte Gte FFL 115

117 _GB.fh :10 Uhr Seite 1 GLAZED DOORS GLAZED FIRM WINDOWS REI 30 - REI 60 REI 90 - REI

118 _GB.fh :10 Uhr Seite 2 GLAZED DOORS INDEX PAGE GLAZED DOORS INDEX 117 ILLUSTRATIONS / SURFACE FINISHING 118 SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 30 AND REI 60 SINGLE-LEAF DOORS, STEEL 119 SECTIONS - GLAZED REI 30 AND REI 60 SINGLE-LEAF DOORS, STEEL 120 SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 30 AND REI 60 DOUBLE-LEAF DOORS, STEEL 121 SECTIONS - GLAZED REI 30 AND REI 60 DOUBLE-LEAF DOORS, STEEL 122 SPECIFICATIONS / SECTIONS - GLAZED COMPLEX REI 30 AND REI 60 DOORS, STEEL 123 SECTIONS - GLAZED COMPLEX REI 30 AND REI 60 DOORS, STEEL 124 INSTALLATIONS - GLAZED REI 30 AND REI 60 DOORS, STEEL / HORIZONTAL SECTIONS 125 INSTALLATIONS - GLAZED REI 30 AND REI 60 DOORS, STEEL / VERTICAL SECTIONS 126 SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 60 SINGLE-LEAF DOORS, ALUMINIUM 127 SECTIONS - GLAZED REI 60 SINGLE-LEAF DOORS, ALUMINIUM 128 SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 60 DOUBLE-LEAF DOORS, ALUMINIUM 129 SECTIONS - GLAZED REI 60 DOUBLE-LEAF DOORS, ALUMINIUM 130 SPECIFICATIONS / SECTIONS - GLAZED COMPLEX REI 60 DOORS, ALUMINIUM 131 SECTIONS - GLAZED COMPLEX REI 60 DOORS, ALUMINIUM 132 INSTALLATIONS - GLAZED REI 60 DOORS, ALUMINIUM / HORIZONTAL SECTIONS 133 INSTALLATIONS - GLAZED REI 60 DOORS, ALUMINIUM / VERTICAL SECTIONS 134 SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 90 AND REI 120 SINGLE-LEAF DOORS, ALUMINIUM 135 SECTIONS - GLAZED REI90 AND REI 120 SINGLE-LEAF DOORS, ALUMINIUM 136 SPECIFICATIONS / ENCUMBRANCES - GLAZED REI 90 AND REI 120 DOUBLE-LEAF DOORS, ALUMINIUM 137 SECTIONS - GLAZED REI90 AND REI 120 DOUBLE-LEAF DOORS, ALUMINIUM 138 SPECIFICATIONS / SECTIONS - GLAZED COMPLEX REI 90 AND REI 120 DOORS, ALUMINIUM 139 SECTIONS - GLAZED COMPLEX REI 90 AND REI 120 DOORS, ALUMINIUM 140 INSTALLATIONS - GLAZED REI 90 AND REI 120 DOORS, ALUMINIUM / HORIZONTAL SECTIONS 141 INSTALLATIONS - GLAZED REI 90 AND REI 120 DOORS, ALUMINIUM / VERTICAL SECTIONS 142 SPECIFICATIONS / SECTIONS - GLAZED FIRM STEEL WINDOWS TYPE REI 60 TO BE BUILT INTO THE WALL 143 SPECIFICATIONS / SECTIONS - GLAZED FIRM STEEL WINDOWS TYPE REI 120 TO BE BUILT INTO THE WALL 144 SPECIFICATIONS / SECTIONS - GLAZED FIRM STEEL WINDOWS TYPE REI 30 OR REI SPECIFICATIONS / SECTIONS - GLAZED FIRM ALUMINIUM WINDOWS TYPE REI 60, REI 90 OR REI Considering the weight of glzed doors the lod of wlls nd ems must e verified (REI 30 = 45kg/m 2, REI 60 = 70kg/m 2, REI 90 = 130kg/m 2, REI 120 = 140kg/m 2 ). Our technicl office, is t your disposl for ny other explntion or enquiries, nd provides the forms for orders or offers. Ninz mintins the right to introduce technicl modifictions ny time without prior notice. All dimensions re expressed in mm. Fire rek doors re normlly instlled to comprtmentlize the inside of uildings nd for tht uilt for tht purpose. - REI glss ecomes opque if exposed to the sun rys. - REI glss deteriortes if exposed to the tmosphere. Should the mterils e instlled in plce even with prtil exposure to sun rys, pproprite colours nd glsses hve to e used; in these cses contct our technicl deprtment for instructions. Fire rted glss due to its production process my hve some esthetic defects which cnnot e climed y client. N.B. where the secondry door lef L2 is smller thn 600 mm or the wll opening is less thn 1200 mm, the closing device is instlled on the opposite side to the hinges nd cn only e opened up to n ngle of 110 degrees. 117

119 _GB.fh :10 Uhr Seite 3 ILLUSTRATIONS/SURFACE FINISHING Glzed fire rek doors certified ccording to the UNI 9723 norm re ville in single nd doule lef versions nd in complex systems REI 30, REI 60, REI 90 nd REI 120. Colours which re lwys ville include: for glzed steel window for glzed lu window White RAL 9010 RAL 9010 White luminium RAL 9006 Grey light RAL 7035 RAL 7035 Blck RAL 9005 Green RAL 6005 RAL 6005 Red RAL 3000 RAL 3000 Blue RAL 5010 RAL 5010 Brown RAL 8017 RAL 8017 Ivory RAL 1013 RAL 1013 Pstel turquoise cler NCS 4020-B50G Aluminium Ox Silver, cler ronze, rown, lck WARNING: stndrd colours Ninz (NCS4020-B50G nd NCS5020-B50G) re not crried out on luminium glzed doors. Other tones re mde to request only. 118