Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series

Size: px
Start display at page:

Download "Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series"

Transcription

1 lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening: 47%/55% Backflex radius: 25.0 mm (0.98 in) in diameter: 5.0 mm (0.20 in) Min. inside radius: 1.6 x belt width, 2.3 x belt width uni Flex SNB 2.3 Surface Opening: 55% uni Flex SNB W 2.3 Surface Opening: 55% (Nominal) mm in mm in A A ICH 25.4 MM/1.00 IN SIDE FEXING SANDAD uni Flex SNB WO 2.3 Surface Opening: 55%

2 uni Flex SNB C ubber op 1.6 uni Flex SNB CI ubber op 2.3 mm in mm in (Nominal) uni Flex SNB C ubber op 2.3 Indent uni Flex SNB C ubber op 1.6 is 26.5 mm (1.04 in). uni Flex SNB CI ubber op 2.3 is 7.0 mm (0.28 in). uni Flex SNB C ubber op 2.3 is available without indent. ype Belt materials and colors in materials and colors uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB 2.3* OM-D B W B W A6.6 B W B G uni Flex SNB C 2.3 OM-D B W uni Flex SNB W uni Flex SNB WO A6.6 B W SS304 uni Flex SNB W A6.6 B W SS304 B G uni Flex SNB C ubber op 1.6 uni Flex SNB CI ubber op 2.3 uni Flex SNB CI ubber op 2.3 B W + 03 K B W + 03 N B G Standard materials and colors ockingplates W B Wearpart and O-ab A6.6 W B For high speed or load abrasive applications: Wearpart and O-ab OM-DK N Non standard material and color: See uni Material and Color Overview. Alternative pin materials: A6.6 B N

3 uni Flex SNB C 1.6 ermissible tensile force OM-D/B /B A6.6/B OM-D /B /B Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in). Flex SNB-C locked with wearpart or O-tabs both sides are 6 mm wider than the dimensions in the table above. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf), 850 N (191 lbf), A N (225 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); eturn: 304 mm (12 in). A6.6/B **Carry **eturn uni Flex SNB C 2.3 / uni Flex SNB 2.3 ermissible tensile force OM-D/B /B A6.6/B /B Flex SNB- locked with wearpart or O-tabs both sides are 6 mm wider than the dimensions in the table above. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf), 850 N (191 lbf), A N (225 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in); eturn: 304 mm (12 in) A6.6/B **Carry **eturn Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in)

4 uni Flex SNB W 2.3 / uni Flex SNB WO 2.3 OM-D/SS +einforcement ermissible tensile force OM-D/SS +einforcement OM-D/SS +einforcement SS+ einforcement SS+ einforcement Outer modules are always in A6.6 on belts wider than 234 mm (9.21 in). Belts up to 234 mm (9.21 in) in width is only available in A6.6. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf), 850 N (191 lbf), A N (225 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); eturn: 304 mm (12 in). Outer modules are always in A6.6 on belts wider than 234 mm (9.21 in). Belts up to 234 mm (9.21 in) in width is only available in A6.6. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf), 850 N (191 lbf), A N (225 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); eturn: 304 mm (12 in). SS+ einforcement **Carry **eturn Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) uni Flex SNB W 2.3 B pins ermissible tensile force OM-D/B /B A6.6/B OM-D/B /B A6.6/B **Carry **eturn Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in)

5 uni Flex SNB W 2.3 SS pins OM-D/SS +einforcement ermissible tensile force /SS +einforcement A6.6/SS +einforcement SS+ einforcement SS+ einforcement Outer modules are always in A6.6 on belts wider than 234 mm (9.21 in). Belts up to 234 mm (9.21 in) in width is only available in A6.6. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf), 850 N (191 lbf), A N (225 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); eturn: 304 mm (12 in). SS+ einforcement **Carry **eturn Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in)

6 Belt racking og Control Systems (W) Basic belt types can be combined with the belt tracking and control systems below to enhance performance. Basic belt types can be combined with the belt tracking and control systems below to enhance performance. uni Flex SNB 2.3 Standard (W) W - 6 mm (0.24 in) Wearpart system made of heat and wear resistant nylon to reduce the friction between belt edge and wearstrip. Only this part needs to be replaced when it has been worn out, not the entire belt. Wearpart W + 12 mm (0.47 in) (W) W - 6 mm (0.24 in) Outer edge tab system made of heat and wear resis tant nylon to reduce the friction between belt edge and wear strip. Using a slotted wear-strip, the O-ab will track the belt and allow the conveyed products to be wider than the belt. Height of O-ab: 6.4 mm (0.25 in) Height of slot: 8.0 mm (0.31 in) O-ab Intermediate tabs (I-ab) are placed on the bottom side of the belt to hold it down on incline conveyors. he intermediate tabs will fit anywhere across the belt bottom and at pitch multiples of 12.7 mm (0.50 in). I-ab (W) W - 68 mm (2.68 in) Side tab (S-ab) for holding the belt down. Normally used for wide belts. With S-abs, Ammerral Beltech modular A/S recommend that the radial forces in the curve are transferred by the inside edge of the belt similar to uni Flex SNB and uni Flex SNB W. einforcement link = 34.0 mm (1.34 in). S-ab ype Belt tracking and control combination Wearpart O-ab S-ab I-ab When using S-abs, please verify sufficient clearance to the shaft. Max. shaft diameter = Sprocket pitch diameter mm (2.00 in). uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C uni Flex SNB W uni Flex SNB W uni Flex SNB WO When using square shafts, please verify that the diagonal does not exceed max. diameter. Example: Sprocket z = 10: Max. shaft diameter = ø31 mm ( = ø1.2 in). - Standard Unavailable + Optional

7 Accessories Click on Flight 50.8 mm (2.00 in) Click on Flight 25.4 mm (1.00 in) ubber Support: Made-o-Order Click on Flight ow: Made-o-Order ubber op Side Guard Accessories Side Guard / Standard ype Belt material & color mm Height in Side Guard -I B W Accessories Flight / Standard ype Belt material & color ink size Height Width mm in mm in Flat A6.6 B W K300 B W Support / MO ype Support material & color H Width ength mm in mm in mm in ubber Support 01 N Click on Flight ow OM-D W Accessories Minimum Indents (I) ype ubber op Side Guard Click on Flights without Side Guard Click on Flights with Side Guard eft ight eft ight eft ight eft ight mm in mm in mm in mm in mm in mm in mm in mm in uni Flex SNB C uni Flex SNB uni Flex SNB C uni Flex SNB W uni Flex SNB WO uni Flex SNB W 2.3* uni Flex SNB W 2.3** * Even distance between Click on Flight rows ** Odd distance between Click on Flight rows

8 Made-o-Order Selection A B C uni Flex SNB with ollers ø17 x 5.5 mm (ø0.67 x 0.22 in) ype lastic Sprocket oller material & color OM-D W Made-o-Oder Materials: OM-D,, A6.6 and oller Material OM-D. Non standard oller material and color: See uni Material and Color verview. A B C mm in mm in mm in No. of teeth ilot Bore in mm Bore size Overall diameter itch diameter Hub diameter Dimension A Dimension B mm in mm in mm in mm in mm in Single row/wo way Double row/wo way Molded A6 G Machined A6 N Z09 x x x Z10 x x x Z12 x x x Z15 x x x Z18 x x x Z19 x x x Molded Molded B Non standard material and color: See uni Material and Color Overview. A Other sizes are available upon request. wo-part are available upon request. Other bore sizes are available upon request. uni etainer ings: See uni etainer ing data sheet. Width of tooth = 4.0 mm (0.16 in). Width of = 25.0 mm (0.98 in). Max. load per shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct position: See uni Assembly Instructions for uni Flex ASB. For more detailed information, contact Customer Service. uni Flex SNB/ Conveyor Belts Seamless Belts Modular Belts iming Belts Expert advice, quality solutions and local service for all your belting needs his information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. his information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. ransmission Belts Fabrication & service Ammeraal Beltech Modular A/S Hjulmagervej 21 DK-7100 Vejle F

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative

More information

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:

More information

uni CSB The versatile plastic modular belt for the Automotive Industry

uni CSB The versatile plastic modular belt for the Automotive Industry uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is

More information

uni Flex SNB Sideflexing

uni Flex SNB Sideflexing uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has

More information

(Nominal) L Belt weight (Belt/pin material)

(Nominal) L Belt weight (Belt/pin material) N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic

More information

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates

More information

T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile

More information

P (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE

P (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:

More information

P (Nominal) L T mm in N lbf kg/m lb/ft

P (Nominal) L T mm in N lbf kg/m lb/ft Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular

More information

POM-SFL/PP POM-EC/PP

POM-SFL/PP POM-EC/PP elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6

More information

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6. Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt

More information

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running

More information

P (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft

P (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material

More information

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6 Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni

More information

uni MPB Straight running

uni MPB Straight running 87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL

More information

uni Flex L-ASB Sideflexing

uni Flex L-ASB Sideflexing uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version

More information

uni MPB Straight running

uni MPB Straight running 88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series

More information

(Nominal) Belt weight (Belt/pin material)

(Nominal) Belt weight (Belt/pin material) Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6

More information

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.

More information

The uni SNB M2 belt increases performance in the following industries/applications:

The uni SNB M2 belt increases performance in the following industries/applications: uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface

More information

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color

More information

FLEXBELTS BENEFITS PROGRAMME AND...

FLEXBELTS BENEFITS PROGRAMME AND... FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch

More information

uni-chains Belt Systems

uni-chains Belt Systems unichains Belt Systems Guarantee unichains guarantees for one year against defects caused by faults in design, production or material. 2002, unichains A/S. Copying or reproduction of this catalogue is

More information

MATERIAL HANDLING SYSTEMS

MATERIAL HANDLING SYSTEMS MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030

More information

uni-chains Conveyor Chains

uni-chains Conveyor Chains s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written

More information

P R O D U C T T E C H N I C A L B U L L E T I N

P R O D U C T T E C H N I C A L B U L L E T I N ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT

More information

Modular transfer plates with rollers

Modular transfer plates with rollers Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra

More information

Download the most up-to-date version at KleanTop Belt Product Catalog

Download the most up-to-date version at   KleanTop Belt Product Catalog Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date

More information

Offset Link L2 L1. SK1 Attachment

Offset Link L2 L1. SK1 Attachment tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series

More information

Advised minimum width SLIDING ROLLERS SERIES 20

Advised minimum width SLIDING ROLLERS SERIES 20 Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES

More information

Multi-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value

Multi-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax

More information

American Standard (ANSI) Roller Chain

American Standard (ANSI) Roller Chain American Standard () Roller (All dimensions in inches) Single Roller ISO itch p Between lates Roller Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer.

More information

COMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...

COMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation... COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading

More information

7956 Series MatTop Chains Design Manual Series MatTop Chains

7956 Series MatTop Chains Design Manual Series MatTop Chains 7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5

More information

FLEXBELTS BENEFITS PROGRAMME AND...

FLEXBELTS BENEFITS PROGRAMME AND... FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch

More information

Omni-Pro 075. USA and International Patents Pending

Omni-Pro 075. USA and International Patents Pending ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and

More information

Belts for the Confectionery Industry. Your business is our business!

Belts for the Confectionery Industry. Your business is our business! NA Your business is our business! Belts for the Confectionery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery www.ammeraalbeltech.com We know your production

More information

P R O D U C T T E C H N I C A L B U L L E T I N

P R O D U C T T E C H N I C A L B U L L E T I N ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International

More information

Complementary accessories

Complementary accessories Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010

More information

Free Flow Chain. Free Flow Chain. Top Roller Chain. 2.5x Speed. Low Noise

Free Flow Chain. Free Flow Chain. Top Roller Chain. 2.5x Speed. Low Noise Double itch Free Flow Chain Free Flow Conveyor his is a conveyor system where the speed of conveyed objects can be freely controlled and stopped at any time and at any position for accumulation or for

More information

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX: Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available

More information

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International

More information

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications

More information

STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55

STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55 STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M

More information

TURNING DISK STEEL CHAINS:

TURNING DISK STEEL CHAINS: TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29

More information

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN OMNI-GRID & OMNI-LITE Turn Curve belting

More information

STRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/

STRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/ STAIHT UNNIN STEE CHAINS Series 812/815-812/815 800/802/805-8157 - 515 16 19 SIDEFEXIN STEE CHAINS Series 881-881O - 881 TAB - 881O TAB 881M - 881 MO - 881 MO - 8857M 8857 TAB - 1874 20 24 A OU STEE CHAINS

More information

Omni-Pro 120. USA and International Patents Pending

Omni-Pro 120. USA and International Patents Pending ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 120 USA and

More information

3.25, 4.5, 7.5 Tabletop Conveyor Specifications

3.25, 4.5, 7.5 Tabletop Conveyor Specifications 3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder

More information

Martin Series 800 Conveyor Sprockets

Martin Series 800 Conveyor Sprockets 800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.

More information

CHAINS & BELTS PRODUCTION PROGRAM

CHAINS & BELTS PRODUCTION PROGRAM CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric

More information

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N] Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5

More information

Series SK Straight running plastic chains

Series SK Straight running plastic chains Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines

More information

300mm Conveyor System

300mm Conveyor System 300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width

More information

1000-SERIES MODULAR BELTS

1000-SERIES MODULAR BELTS 1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low

More information

Belt Conveyor System. The Just-in-Time (JIT)

Belt Conveyor System. The Just-in-Time (JIT) 24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,

More information

Standard Metric Roller Chain (DIN 8180/8187 and BS 228)

Standard Metric Roller Chain (DIN 8180/8187 and BS 228) Standard Metric Roller (DIN 10/17 and BS 22) Single Roller Size ISO itch p Between Inner lates b 1 2. 2.0.00. 2. 4. 6. 6. 9. 11.6 19.56 0.99.99. 4 Roller d 1. 4.00 5.00 6..51 7.77.16.07 15. 0 27.94 29.21

More information

C O N V E Y O R B E L T S

C O N V E Y O R B E L T S CONVEYOR BELTS GENERAL INDEX INFO....................................................... 3-9 Why Eurobelt Product Range Materials INFO SERIES 20.................................................. 10-23

More information

MicroSpan. Chain. Chain. revised SpanTech LLC

MicroSpan. Chain. Chain. revised SpanTech LLC Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...

More information

CONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP

CONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP CONVEYOR INSTALLATION MANUAL I VERSION 1 Rexnord TableTop and MatTop Chains Rexnord Roller Upgrade System REXNORD FLATTOP Rexnord Industries, LLC For more than one hundred years, Rexnord has provided superior

More information

Index SECTION L PLASTICS

Index SECTION L PLASTICS Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60

More information

Rexnord 1757 TAB TableTop Chain

Rexnord 1757 TAB TableTop Chain 1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width

More information

Super-Shield Parts List & Pricing. Date: 06/01/12

Super-Shield Parts List & Pricing. Date: 06/01/12 Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount

More information

New Standard Power Transmission

New Standard Power Transmission ew Standard ower ransmission lame ut Sprockets S has series of engineered conveying sprockets and matching conveying chains of different varieties. We manufacture engineered sprockets with and without

More information

Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica

Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed

More information

P R O D U C T T E C H N I C A L B U L L E T I N SUPER SMALL RADIUS OMNI-GRID. Turn Radius = 0.8 x (the Belt Width) (Patent Pending)

P R O D U C T T E C H N I C A L B U L L E T I N SUPER SMALL RADIUS OMNI-GRID. Turn Radius = 0.8 x (the Belt Width) (Patent Pending) ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N TABLE OF CONTENTS

More information

PROLINK ENGINEERING MANUAL

PROLINK ENGINEERING MANUAL EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,

More information

Apron Feeders. TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty

Apron Feeders. TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty Apron Feeders TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty Apron Feeders Terex Jaques Apron Feeders use heavy-duty

More information

HabaCHAIN Slat and Conveyor Chains

HabaCHAIN Slat and Conveyor Chains Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended

More information

FMB-DDSP Belt for High Load and Low Load Pulleys

FMB-DDSP Belt for High Load and Low Load Pulleys FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30

More information

May 2011 English Version Issue 3.6

May 2011 English Version Issue 3.6 E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power

More information

THE MOST ADAPTABLE BELT FOR SPIRAL CAGE SYSTEMS UP TO 300 LBS. CAM-GRID EXTRA UP TO 250 LBS. CAM-GRID

THE MOST ADAPTABLE BELT FOR SPIRAL CAGE SYSTEMS UP TO 300 LBS. CAM-GRID EXTRA UP TO 250 LBS. CAM-GRID CAM-GRID THE MOST ADAPTABLE BELT FOR SPIRAL CAGE SYSTEMS SUPERIOR STRENGTH STRAIGHT & SPIRAL APPLICATIONS EASY TO CLEAN Cam-Grid belts are our most application-adaptable product for spiral systems. MAX.

More information

Your business is our business!

Your business is our business! EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing

More information

Spare Parts Manual. MaxiSpan - MultiSpan - MonoSpan - MiniLink. Stainless Steel, Painted, & Aluminum Conveyors. presents. for

Spare Parts Manual. MaxiSpan - MultiSpan - MonoSpan - MiniLink. Stainless Steel, Painted, & Aluminum Conveyors. presents. for presents Spare Parts Manual for MaxiSpan - MultiSpan - MonoSpan - MiniLink Stainless Steel, Painted, & Aluminum Conveyors 2008 SpanTech GUARANTEE OF QUALITY SpanTech LLC has carefully designed, manufactured,

More information

TIMING BELTS, PULLEYS, CHAINS AND SPROCKETS

TIMING BELTS, PULLEYS, CHAINS AND SPROCKETS IMIN BLS, ULLYS, CHAINS AND SOCKS SCION DIN BL CONIUAIONS HON:..00 AX:.. WWW.SD-SI.COM. Double-Sided win ower Belt Drives iming belts are also available in double-sided designs, which offer an infinite

More information

STRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP

STRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP SIGH UNNING CHINS with low noise accumulation rollers Series BP 821 - BP 8257 - BP 831 46 48 SIDFXING CHINS with low noise accumulation rollers Series BP 878 B - BP 879 M BP 882 B - BP 882 M 49 52 PPICION:

More information

Food Grade Positive Drive Line

Food Grade Positive Drive Line Food Grade Positive Drive Line The Next Step in Belting SuperDrive The homogeneous PositiveDrive belt, recognized worldwide as the best choice where hygiene and conveying efficiency are essential. The

More information

May 2009 English Version Issue 3.0

May 2009 English Version Issue 3.0 S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information

More information

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain 1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive

More information

ELATECH flat belts. Pulleys. Belt storage. TP (Total Protection) Belts. Belt installation. Belt life. Belt fastening guidelines F1 F2 F2,5 F3

ELATECH flat belts. Pulleys. Belt storage. TP (Total Protection) Belts. Belt installation. Belt life. Belt fastening guidelines F1 F2 F2,5 F3 ELATECH flat belts Pulleys Belt storage Belt installation TP (Total Protection) Belts Belt life Belt fastening guidelines F1 F2 F2,5 F3 a b p s d Bolt R (Radius) F1 F2 F2,5 F3 D F1 1 ELATECH M and V Type

More information

Magnetic Particle Brakes and Clutches

Magnetic Particle Brakes and Clutches Magnetic Particle Brakes and Clutches Accurate torque control with instantaneous engagement! Available in a wide range of models and sizes Warner Electric s magnetic particle brakes and clutches are quiet

More information

Rex 1701 Multiflex Chain

Rex 1701 Multiflex Chain 1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate

More information