Ammeraal Beltech Modular
|
|
- Ronald Kelly
- 6 years ago
- Views:
Transcription
1 mmeraal eltech Modular Innovative belt and chain solutions for every industry & application
2 Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM NL) page uni C Rough (POX-FR) page 15-18
3 Datasheet: uni C 2% Rough EN Plastic Modular elt Series uni C 2% Rough elt material & color Running direction Pin and lock P6.6 POM NL K S P P (Nominal) Non standard material and color: See uni Material and Color Overview. Safety edges with orange or yellow edge links mounted on alternating pitches along both belt edges are optional. lternative pin and lock systems and materials: Contact Customer Service. elt width Permissible tensile force (elt/pin material) PP O L T Straight running belt Nominal pitch: 40.0 mm (1.57 in) Surface type: Rough Surface opening: 2% Open ackflex radius: 60.0 mm (2.36 in) Pin diameter: 6.0 mm (0.24 in) mm in mm in S L T elt weight (elt/pin material) *Min No drive POM-NL/P6.6 POM-NL/SS POM-NL/P6.6 POM-NL/SS sprocket Carry per shaft mm in N lbf N lbf Kg/m Ib/ft Kg/m Ib/ft Number of wear strips (min no) dditional standard belt widths are available in steps of 50.7 mm (2.00 in.) dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in.) (pcs) Return (pcs) PITCH 40.0 MM/1.57 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 50.7 mm (2.00 in.) dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in.) dditional standard belt widths are available in steps of 50.7 mm (2.00 in.) dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in.) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-NL 8000 N (1799 lbf). = Single Link 3
4 Datasheet: uni C 2% Rough Top/ottom Insert Photo shows bottom of the belt + = Insert Weight kg/m 2 lb/ft 2 Wheel Plate POM DK O Contact area/wear surface of belt will incease from 25% to 49% by the use of inserts. Top/ottom Insert EC insert in uni C 2% Rough type can be build in to uni C Closed to create an electrical conductive belt. + = = EC Grip surface located above the belt surface to ensure electrical discharge Insert Weight kg/m 2 lb/ft 2 Electrical Conductive POM-EC K Contact area/wear surface of belt will incease from 25% to 38% by the use of inserts. POM-EC and POX-FREC holds a surface resistivity of 1x10 6 Ohm according to IEC 60093/STM D257. Flight H Flight H Link Width mm in mm in mm in size mm in Car pusher POM-NL O K ackflex radius when flights are used: mm (4.72 in). 4
5 Datasheet: uni C 2% Rough Sprocket No of teeth Pilot bore ore size in mm Overall diameter Pitchdiameter Hubdiameter Dimension Dimension mm in mm in mm in mm in mm in Z Z Double row/one way Machined P6 N Machined sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of single tooth = 6.5 mm (0.25 in) Width of sprocket = 33.2 mm (1.31 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni C. For more detailed sprocket information. contact Customer Service. 5
6 Datasheet: uni C 2% Rough Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service uni C 2% Rough/ mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 6
7 Datasheet: uni C 2% Rough EN Plastic Modular elt Series uni C 2% Rough elt material & color Running direction POX FR EG Pin and lock PT LG PP O S P P (Nominal) Non standard material and color: See uni Material and Color Overview. Safety edges with orange or yellow edge links mounted on alternating pitches along both belt edges are optional. lternative pin and lock systems and materials: Contact Customer Service. elt width Permissible tensile force (elt/pin material) L T Straight running belt Nominal pitch: 40.0 mm (1.57 in) Surface type: Rough Surface opening: 2% Open ackflex radius: 60.0 mm (2.36 in) Pin diameter: 6.0 mm (0.24 in) mm in mm in S L T elt weight (elt/pin material) *Min No drive POX-FR/PT POX-FR/SS POX-FR/PT POX-FR/SS sprocket Carry per shaft mm in N lbf N lbf Kg/m Ib/ft Kg/m Ib/ft Number of wear strips (min no) dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in). (pcs) Return (pcs) PITCH 40.0 MM/1.57 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in) dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POX-FR 8000 N (1799 lbf). = Single Link 7
8 Datasheet: uni C 2% Rough Top/ottom Insert Photo shows bottom of the belt + = Insert Weight kg/m 2 lb/ft 2 Wheel Plate POM DK O Contact area/wear surface of belt will incease from 25% to 49% by the use of inserts. Top/ottom Insert EC insert in uni C 2% Rough type can be build in to uni C Closed to create an electrical conductive belt. + = = EC Grip surface located above the belt surface to ensure electrical discharge Insert Weight kg/m 2 lb/ft 2 Electrical Conductive POM-EC K Contact area/wear surface of belt will incease from 25% to 38% by the use of inserts. POM-EC and POX-FREC holds a surface resistivity of 1x10 6 Ohm according to IEC 60093/STM D257. Flight H Flight H Link Width mm in mm in mm in size mm in Car pusher POX FR O K ackflex radius when flights are used: mm (4.72 in). 8
9 Datasheet: uni C 2% Rough Sprocket No of teeth Pilot bore ore size in mm Overall diameter Pitchdiameter Hubdiameter Dimension Dimension mm in mm in mm in mm in mm in Z Z Double row/one way Machined P6 N Machined sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of single tooth = 6.5 mm (0.25 in) Width of sprocket = 33.2 mm (1.31 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni C. For more detailed sprocket information. contact Customer Service. 9
10 Datasheet: uni C 2% Rough Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service uni C 2% Rough/ mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 10
11 Datasheet: uni C Rough EN Plastic Modular elt Series uni C Rough elt material & color Running direction Pin and lock P6.6 POM NL K S PP O P P (Nominal) Non standard material and color: See uni Material and Color Overview. Safety edges with orange or yellow edge links mounted on alternating pitches along both belt edges are optional. lternative pin and lock systems and materials: Contact Customer Service. elt width Permissible tensile force (elt/pin material) L T Straight running belt Nominal pitch: 40.0 mm (1.57 in) Surface type: Rough Surface opening: Closed ackflex radius: 60.0 mm (2.36 in) Pin diameter: 6.0 mm (0.24 in) mm in mm in S L T elt weight (elt/pin material) *Min No drive POM-NL/P6.6 POM-NL/SS POM-NL/P6.6 POM-NL/SS sprocket Carry per shaft mm in N lbf N lbf Kg/m Ib/ft Kg/m Ib/ft Number of wear strips (min no) dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in). (pcs) Return (pcs) PITCH 40.0 MM/1.57 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in) dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-NL 8000 N (1799 lbf). = Single Link 11
12 Datasheet: uni C Rough Top/ottom Insert Photo shows bottom of the belt + = Insert Weight kg/m 2 lb/ft 2 Wheel Plate POM DK O Contact area/wear surface of belt will incease from 25% to 49% by the use of inserts. Top/ottom Insert EC insert in uni C 2% Rough type can be build in to uni C Closed to create an electrical conductive belt. + = = EC Grip surface located above the belt surface to ensure electrical discharge Insert Weight kg/m 2 lb/ft 2 Electrical Conductive POM-EC K Contact area/wear surface of belt will incease from 25% to 38% by the use of inserts. POM-EC and POX-FREC holds a surface resistivity of 1x10 6 Ohm according to IEC 60093/STM D257. Flight H Flight H Link Width mm in mm in mm in size mm in Car pusher POM-NL O K ackflex radius when flights are used: mm (4.72 in). 12
13 Datasheet: uni C Rough Sprocket No of teeth Pilot bore ore size in mm Overall diameter Pitchdiameter Hubdiameter Dimension Dimension mm in mm in mm in mm in mm in Z Z Double row/one way Machined P6 N Machined sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of single tooth = 6.5 mm (0.25 in) Width of sprocket = 33.2 mm (1.31 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni C. For more detailed sprocket information. contact Customer Service. 13
14 Datasheet: uni C Rough Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service uni C Rough/ mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 14
15 Datasheet: uni C Rough EN Plastic Modular elt Series uni C Rough elt material & color Running direction POX FR EG Pin and lock PT LG PP O S P P (Nominal) Non standard material and color: See uni Material and Color Overview. Safety edges with orange or yellow edge links mounted on alternating pitches along both belt edges are optional. lternative pin and lock systems and materials: Contact Customer Service. elt width Permissible tensile force (elt/pin material) L T Straight running belt Nominal pitch: 40.0 mm (1.57 in) Surface type: Rough Surface opening: Closed ackflex radius: 60.0 mm (2.36 in) Pin diameter: 6.0 mm (0.24 in) mm in mm in S L T elt weight (elt/pin material) *Min No drive POX-FR/PT POX-FR/SS POX-FR/PT POX-FR/SS sprocket Carry per shaft mm in N lbf N lbf Kg/m Ib/ft Kg/m Ib/ft Number of wear strips (min no) dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in). (pcs) Return (pcs) PITCH 40.0 MM/1.57 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in) dditional standard belt widths are available in steps of 50.7 mm (2.00 in). dditional non-standard belt widths are available in steps of 16.9 mm (0.67 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POX-FR 8000 N (1799 lbf). = Single Link 15
16 Datasheet: uni C Rough Top/ottom Insert Photo shows bottom of the belt + = Insert Weight kg/m 2 lb/ft 2 Wheel Plate POM DK O Contact area/wear surface of belt will incease from 25% to 49% by the use of inserts. Top/ottom Insert EC insert in uni C 2% Rough type can be build in to uni C Closed to create an electrical conductive belt. + = = EC Grip surface located above the belt surface to ensure electrical discharge Insert Weight kg/m 2 lb/ft 2 Electrical Conductive POX-FREC K Contact area/wear surface of belt will incease from 25% to 38% by the use of inserts. POM-EC and POX-FREC holds a surface resistivity of 1x10 6 Ohm according to IEC 60093/STM D257. Flight H Flight H Link Width mm in mm in mm in size mm in Car pusher POX FR O K ackflex radius when flights are used: mm (4.72 in). 16
17 Datasheet: uni C Rough Sprocket No of teeth Pilot bore ore size in mm Overall diameter Pitchdiameter Hubdiameter Dimension Dimension mm in mm in mm in mm in mm in Z Z Double row/one way Machined P6 N Machined sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of single tooth = 6.5 mm (0.25 in) Width of sprocket = 33.2 mm (1.31 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni C. For more detailed sprocket information. contact Customer Service. 17
18 Datasheet: uni C Rough Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service uni C Rough/ mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 18
19 Date: Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service Global Headquarters: mmeraal eltech Holding.V. P.O. ox 38, 1700 Heerhugowaard The Netherlands T F info@ammeraalbeltech.com
Ammeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More informationuni CSB The versatile plastic modular belt for the Automotive Industry
uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationT L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
More informationPOM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More informationP (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
More informationP (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE
Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationT L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
More informationBottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPOM-SFL/PP POM-EC/PP
elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationExtra Heavy Duty modular belts 2508 & 2630 Series
Extra Heavy Duty modular belts 2508 & 2630 Series EMERSON. E CONSIDER IT SOLVED. APPLICATIONS Pictures by courtesy of Hohmeier Anlagenbau GmbH and Audi AG Ingolstadt - Germany 2508 HEAVY DUTY BELTS PATENT
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationExtra Heavy Duty Modular Belts 2508 & 2630 Series
Extra Heavy Duty Modular Belts 2508 & 2630 Series Applications Dual Strand Test Tunnel Sgle Strand Car Wash Individual Pushers Mount Easily On Belt Surface Pictures by courtesy of Hohmeier Anlagenbau GmbH
More informationThe uni SNB M2 belt increases performance in the following industries/applications:
uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface
More informationuni MPB Straight running
88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationuni MPB Straight running
87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
More informationBelts for the Confectionery Industry. Your business is our business!
NA Your business is our business! Belts for the Confectionery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery www.ammeraalbeltech.com We know your production
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationRexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationTiming Belts Our product range
GB Timing Belts Our product range» Standard program» Production engineering» Joint techniques» Cleats» V-guides» Special surface coating» Sprockets» Tools 02 03 Bode Belting More than 30 years experience
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationYour business is our business!
EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationJaw Couplings REK DCO
elastic for dynamic applications with curved jaws Features Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive torsion spring properties due to primarily pressurised
More informationSoliflex PRO & Soliflex PRO mini
EN Introducing the Soliflex PRO mini Soliflex PRO & Soliflex PRO mini NEW The Ultimate Hygienic Belt A Win-Win for the Food Industry: Ultimate hygiene and lower total cost of ownership With over 65 years
More informationNEW. Modular Belt selection. > uni Flex L-ASB > uni Flex L-ASB T > uni Flex L-ASB R. The brand for plastic modular belts and chains
UK EW Modular elt selection > uni Flex L-S > uni Flex L-S T > uni Flex L-S R The brand for plastic modular belts and chains uni Flex L-S Pitch 5.8 mm (2. in.) uni Flex L-S This new generation of 2 in.
More information300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
More informationOmni-Pro 075. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International
More informationEnergy Chain Systems E2 medium
Energy Chain Systems E2 medium E2 medium Series // Series 26/27/27i Series 340/350* *Extender chain 2 parts per link, maximum Easy installation Many connection options Long service life High stability
More informationNEW. Plastic Modular Belt Series > uni RTB M1 > uni RTB M2
UK NEW Plastic Modular Belt Series > > uni RTB 2 Pitch 50.8 (2.00 in.) uni RTB - State of The Art in Roller Top Modular Belts The new uni RTB belt is the most flexible and reliable handling solution for
More informationCOMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...
COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading
More informationOmni-Pro 120. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 120 USA and
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationPROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
More informationConveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
More informationConveying with ease. deniway plate chain conveyor. Plate chain conveyor components (second extended version)
Conveying with ease deniway plate chain conveyor Plate chain conveyor components (second extended version) 1 2 Contents The deniway construction kit 4 Key data 5 Components 7 Channels 8 Plate chain 18
More informationChain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49
More informationJASON URETHANE POWER TRANSMISSION BELTS
JSON URETHNE POWER TRNSMISSION BELTS UNIFLE BELTS Manufactured in urethane with continuous helically wound steel cable cords, Jason's Uniflex belts are ideal for situations where high stress and load demands
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationTooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P
Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication
More informationTaper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B
T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationYour business is our business!
GB Your business is our business! Belts for the Wood Industry Ammeraal Beltech:» knows your process» for all your belting needs» just-in-time delivery www.ammeraalbeltech.com Knowing your production process
More informationBelts for the Bakery Industry. Your business is our business! Ammeraal Beltech knows your process for all your belting needs just-in-time delivery
EN Helping you bake it better! Your business is our business! Belts for the Bakery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery Knowing your production
More informationWhy Choose Rexnord? 866-REXNORD/ (Within the U.S.) (Outside the U.S.)
866-REXNORD/866-739-6673 (Within the U.S.) 414-643-2366 (Outside the U.S.) www.rexnord.com Why Choose Rexnord? When it comes to providing highly engineered products that improve productivity and efficiency
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationDEWA NON-METALLIC CHAIN SCRAPER SYSTEM
DEWA NON-METALLIC CHAIN SCRAPER SYSTEM DEWA non-metallic chain has been developed with vast experiences and utilising modem hi-technologies. DEWA chain is quite similar to the conventional steel chain
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationDrop Forged Chain For Conveyors & Elevators
Drop Forged Chain For Conveyors & Elevators Quality Components for Chain Conveyors & Elevators Introduction Members of the Schenck Process Group, Stock Redler Ltd are leading providers of feeding, automation
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationApron Feeders. TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty
Apron Feeders TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty Apron Feeders Terex Jaques Apron Feeders use heavy-duty
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationFood Grade Positive Drive Line
Food Grade Positive Drive Line The Next Step in Belting SuperDrive The homogenous PositiveDrive belt, recognized worldwide as the best choice where hygiene and conveying efficiency are essential. The unique
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationThe right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard
More informationN e W. modular plastic belts 7300 and 7200 series
N e W REGINA Chain Products* are available from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)358-330 (800)638-830 fx: (40)358-342 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com
More informationCHAIN DRIVES. Back to Contents pages
ack to Contents pages CHIN CHIN ROLLER CHIN DRIVE DESIGN & DIMENSIONS, S & NSI SINGLE & MULTI STRND TTCHMENT CHIN PGE 2 CONVEYOR CHINS DOULE PITCH, CONVEYOR, SCRPER ND GRICULTURL TYPES WITH OR WITHOUT
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationELATECH flat belts. Pulleys. Belt storage. TP (Total Protection) Belts. Belt installation. Belt life. Belt fastening guidelines F1 F2 F2,5 F3
ELATECH flat belts Pulleys Belt storage Belt installation TP (Total Protection) Belts Belt life Belt fastening guidelines F1 F2 F2,5 F3 a b p s d Bolt R (Radius) F1 F2 F2,5 F3 D F1 1 ELATECH M and V Type
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511
More informationENGINEERING CHAIN DIVISION
Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick.
More informationIndex INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL
LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationModular belt conveyor WL678X
Modular belt conveyor 678X Contents System information...139 Conveyor sections...140 Modular Belts - Introduction...141 Modular belts...142 Conveyor Beams - Introduction...143 Conveyor frame components...145
More information