POM-SFL/PP POM-EC/PP

Transcription

1 elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6 OM-SF/ OM-E/ E/E K N D OM-SF/ OM-E/ mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft Surface opening: losed ackflex radius: 20.0 mm (0.80 in) in diameter: 5 mm (0.20 in) E/E E N Number of wear strips (Min. No.) **arry IH 12.7 MM/0.50 IN SRAIGH RUNNING SANDARD General belt tolerance is +0/-0.4% at 23 /73 F and 50% RH. For exact belt width contact ustomer Service. Non standard belt width on request. he belt width in E is 0.3 % wider than the belt width in the table. *Max. oad per Drive Sprocket. elt material: OM-SF 1000 N (225 lbf), 800 N (180 lbf), E 800 N (180 lbf), OM-E 1000 N (225 lbf). **Max. Spacing between wear strips, arry: 152 mm (6 in); Return: 304 mm (12 in). = Single ink

2 Accessories Rubber op A elt Rubber A ink Width mm in size mm in Flat W 03 N K G 03 K K Non Standard material and color: See uni Material and olor Overview. Rubber op is not avaliable in belt width below 77 mm (3 in). Accessories Non Standard uni AmFlight rinciple sketch Other Non Standard option: See uni AmFlight Overview.

3 Datasheet: NS NS elt material & color OM-SF E in material & color E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: ockpin: G A6.6 N D E N Surface opening: losed ackflex radius: 20.0 mm (0.80 in) in diameter: 5.0 mm (0.20 in) OM-SF/ E/E OM-SF/ E/E mm in N lbf N lbf kg/m lb/ft kg/m lb/ft Number of wear strips (Min. No.) **arry IH 12.7 MM/0.50 IN SRAIGH RUNNING SANDARD General belt tolerance is +0/-0.4% at 23 /73 F and 50% RH. For exact belt width contact ustomer Service. Non standard belt width on request. *Max. oad per Drive Sprocket. elt material: OM-SF 1000 N (225 lbf), E 800 N (180 lbf) **Max. Spacing between wear strips, arry: 152 mm (6 in); Return: 304 mm (12 in) = Single ink

4 Datasheet: Vacuum Vacuum Recommended belt Recommended pin G W Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: ockpin: G A6.6 N D E N Surface opening: losed ackflex ravdius: 20.0 mm (0.80 in) in diameter: 5 mm (0.20 in) Vacuum holes: ø3.2 mm (0.12 in) mm in N lbf kg/m lb/ft Number of wear strips (Min. No.) **arry IH 12.7 MM/0.50 IN SRAIGH RUNNING NON SANDARD General belt tolerance is +0/-0.4% at 23 /73 F and 50% RH. For exact belt width contact ustomer Service. Non standard belt width on request. *Max. oad per Drive Sprocket. elt material: 800 N (180 lbf) **Max. Spacing between wear strips, arry: 152 mm (6 in); Return: 304 mm (12 in) = Single ink

5 Sprocket No. of teeth ilot bore in mm ore size Overall diameter itchdiameter Hubdiameter A-dimension -dimension mm in Single row/wo way Double row/wo way Molded A6 G Machined A6 N Z10 x x x Z19 x x x Z28 x x x Z x x Z38 x x x Molded Molded Non standard material and color: See uni Material and olor Overview. Nosebars Min. Dimensions E mm in A D D E Other sizes are available upon request. wo-part are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 7.0 mm (0.28 in) Width of = 20.0 mm (0.79 in) Max load per shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct position: See uni Assembly Instructions for. For more detailed information. contact ustomer Service.