Ammeraal Beltech Modular

Transcription

1 eraal eltech Modular Innovative belt and cha solutions for every dustry & application

2 Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex L-S 47% Open Radius 2.5,3.0,3.5,4.0 page 11-14

3 Datasheet: uni Flex L-S 47% Open Radius 1.6 Plastic Modular elt Series uni Flex L-S 47% Open (Radius 1.6) elt material & color P and lock material & color elt width POM-D POM-D/P6.6 Spiral runng direction Runng direction W PP P6.6 Non standard material and color: See uni Material and Color Overview. lternative p and lock systems and materials: Contact Customer Service. Permissible tensile force (elt/p material) PP/P6.6 Straight sections Curve sections Straight sections Curve sections elt weight (elt/p material) POM-D/P6.6 PP/P6.6 N lbf N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft P (Nomal) *M. No. drive sprocket per shaft Number of wear strips (M. No.) **Carry (pcs) W P T Sideflexg belt Nomal pitch: 50.8 (2.00 ) Surface type: Flat Surface openg: 47% ackflex radius: (3.94 ) P : 6 (0.24 ) M. side radius: 1.6 x belt width T **Return (pcs) PITC 50.8 MM/2.00 IN SIDE FLEXING STNDRD dditional non-standard belt widths are available steps of 25.4 (1.00 ). General belt tolerance is +0/-0.4% at 23 C/73 F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 2500 N (562 lbf), PP 1200 N (270 lbf). **Max. Spacg between wear strips, Carry: 152 (6 ); Return: 304 (12 ). = Sgle Lk 3

4 Datasheet: uni Flex L-S 47% Open Radius 1.6 ccessories Rubber Top X elt material & color Rubber material, hardness & color X Curved PP TPE-S Shore 60 K uni Flex L-S Rubber Top R1.6: Indent m (3.82 ) and Increment 25.4 (1.00 ). ccessories Side Guard Closed Side Guard Open Photo will be updated Photo will be updated Side Guard Outside Closed Side Guard Closed Material & color POM-D Side Guard Open Side Guard Outside Closed M. dent for Side Guard Closed and Side Guard Open: 55.0 (2.17 ) and Increment 25.4 (1.00 ). M/max dent for Side Guard Outside Closed: 10.0 (0.39 ). Non Standard material and color: See uni Material and Color Overview

5 Datasheet: uni Flex L-S 47% Open Radius 1.6 ccessories mflight Runng direction V 2 1 Material & color 1 2 V Push PE W > Other Non Standard option: See uni mflight Overview. elt width m Runng direction PI m Increment: 25.4 (1.00 ). PI Design Guideles F E uni Flex L-S R2.2 uni Flex L-S R1.6 (side) W m. 1.5 x W m. 1.5 x W C m. 3.2 x W m. 2.6 x W C m. 2.2 x W m. 1.6 x W D G D m. 2.0 x W m. 2.0 x W C E m. 2.0 x W m. 2.0 x W F m. 8.9 x W m. 7.7 x W G m. 8.4 x W m. 7.2 x W uni Flex L-S 47% Open Radius 1.6 can not be used conveyors with both left and right turng curves. ll curves have to turn the same direction. For m. conveyor dimensions please refer to sketch and diagram. 5

6 Datasheet: uni Flex L-S 47% Open Radius 1.6 Sprocket No. of teeth Pilot ore ore size Overall Pitch ub Dimension Dimension Z Z Z Z Sgle row/two way Mached P6 N Mached sprocket Mached sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 15.0 (0.59 ) Width of sprocket = 30.0 (1.18 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. For correct sprocket position: See uni ssembly Instructions for uni Flex L-S. For more detailed sprocket formation, contact Customer Service. uni Flex L-S 47% Open Radius 1.6/ Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service eraal eltech Modular /S julmagervej 21 DK-7100 Vejle T F adm@unichas.com 6

7 Datasheet: uni Flex L-S 47% Open Radius 2.2 Plastic Modular elt Series uni Flex L-S 47% Open (Radius 2.2) elt material & color P and lock material & color elt width POM-D POM-D/P6.6 Spiral runng direction Runng direction W PP P6.6 Non standard material and color: See uni Material and Color Overview. lternative p and lock systems and materials: Contact Customer Service. Permissible tensile force (elt/p material) PP/P6.6 Straight sections Curve sections Straight sections Curve sections elt weight (elt/p material) POM-D/P6.6 PP/P6.6 N lbf N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft P (Nomal) *M. No. drive sprocket per shaft Number of wear strips (M. No.) **Carry (pcs) W P T Sideflexg belt Nomal pitch: 50.8 (2.00 ) Surface type: Flat Surface openg: 47% ackflex radius: (3.94 ) P : 6 (0.24 ) M. side radius: 2.2 x belt width T **Return (pcs) PITC 50.8 MM/2.00 IN SIDE FLEXING STNDRD dditional standard belt widths are available steps of 76.2 (3.00 ). dditional non-standard belt widths are available steps of 25.4 (1.00 ) dditional standard belt widths are available steps of 76.2 (3.00 ). dditional non-standard belt widths are available steps of 25.4 (1.00 ) General belt tolerance is +0/-0.4% at 23 C/73 F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 2500 N (562 lbf), PP 1200 N (270 lbf). **Max. Spacg between wear strips, Carry: 152 (6 ); Return: 304 (12 ). = Sgle Lk 7

8 Datasheet: uni Flex L-S 47% Open Radius 2.2 ccessories Rubber Top X elt material & color Rubber material, hardness & color X Curved PP TPE-S Shore 60 K uni Flex L-S Rubber Top Radius 2.2: Indent m (2.80 ) and Increment 25.4 (1.00). ccessories Side Guard Closed Side Guard Open Photo will be updated Photo will be updated Side Guard Outside Closed Side Guard Closed Material & color POM-D Side Guard Open Side Guard Outside Closed M. dent for Side Guard Closed and Side Guard Open: 55.0 (2.17 ) and Increment 25.4 (1.00 ). M/max dent for Side Guard Outside Closed: 10.0 (0.39 ). Non Standard material and color: See uni Material and Color Overview

9 Datasheet: uni Flex L-S 47% Open Radius 2.2 ccessories ottom Tab W Spiral runng direction Runng direction Y S Z V ottom Tab material and colors S V W Y Z old Down Edge POM-D W PP W Non Standard material and color: See uni Material and Color Overview. ccessories mflight Runng direction V 2 1 Material & color 1 2 V Push PE W > Other Non Standard option: See uni mflight Overview. elt width m Runng direction PI m Increment: 25.4 (1.00 ). PI 9

10 Datasheet: uni Flex L-S 47% Open Radius 2.2 Design Guideles F C E W C uni Flex L-S R2.2 m. 1.5 x W m. 3.2 x W m. 2.2 x W D G D m. 2.0 x W C E m. 2.0 x W F m. 8.9 x W G m. 8.4 x W For m. conveyor dimensions please refer to sketch and diagram. Sprocket No. of teeth Pilot ore ore size Overall Pitch ub Dimension Dimension Z Z Z Z Sgle row/two way Mached P6 N Mached sprocket Mached sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 15.0 (0.59 ) Width of sprocket = 30.0 (1.18 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. For correct sprocket position: See uni ssembly Instructions for uni Flex L-S. For more detailed sprocket formation, contact Customer Service. uni Flex L-S 47% Open Radius 2.2/ Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service eraal eltech Modular /S julmagervej 21 DK-7100 Vejle T F adm@unichas.com 10

11 Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 Plastic Modular elt Series uni Flex L-S 43% Open (Radius 2.5/3.0/3.5/4.0) Non standard material and color: See uni Material and Color Overview. lternative p and lock systems and materials: Contact Customer Service. elt width POM-D/P6.6 Spiral runng direction Recoended elt material & color POM-D Recoended P material & color P6.6 Permissible tensile force (elt/p material) PP/P6.6 Straight sections Curve sections Straight sections Curve sections P T P (Nomal) Sideflexg belt Nomal pitch: 50.8 (2.00 ) Surface type: Flat Surface openg: 47%/50% ackflex radius: 65.0 (2.56 ) P : 6 (0.24 ) M. side radius: 2.5 / 3.0 / 3.5 / 4.0 x belt width T elt weight (elt/p material) POM-D/P6.6 PP/P6.6 N lbf N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft *M. No. drive sprocket per shaft Number of wear strips (M. No.) **Carry (pcs) **Return (pcs) PITC 25.4 MM/1.00 IN SIDE FLEXING NON STNDRD dditional standard belt widths are available steps of 76.2 (3.00 ) dditional non-standard belt widths are available steps of 25.4 (1.00 ) dditional standard belt widths are available steps of 76.2 (3.00 ) dditional non-standard belt widths are available steps of 25.4 (1.00 ) General belt tolerance is +0/-0.4% at 23 C/73 F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 2500 N (562 lbf), PP 1200 N (270 lbf). **Max. Spacg between wear strips, Carry: 152 (6 ); Return: 304 (12 ). = Sgle Lk 11

12 Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 ccessories Rubber Top X elt material & color Rubber material, hardness & color X Curved PP TPE-S Shore 60 K uni Flex L-S Rubber Top: Indent m (2.80 ) and Increment 25.4 (1.00). ccessories Side Guard Closed Side Guard Open Photo will be updated Photo will be updated Side Guard Outside Closed Side Guard Closed Material & color POM-D Side Guard Open Side Guard Outside Closed M. dent for Side Guard Closed and Side Guard Open: 80.0 (3.15 ) and Increment 25.4 (1.00 ). M/max dent for Side Guard Outside Closed: 10.0 (0.39 ). Non Standard material and color: See uni Material and Color Overview

13 Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 Sprocket No. of teeth Pilot ore ore size Overall Pitch ub Dimension Dimension Z Z Z Z Sgle row/two way Mached P6 N Mached sprocket Mached sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 7.0 (0.28 ) Width of sprocket = 30.0 (1.18 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. For correct sprocket position: See uni ssembly Instructions for uni Flex S. For more detailed sprocket formation, contact Customer Service. 13

14 Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0/ eraal eltech Modular /S julmagervej 21 DK-7100 Vejle T F adm@unichas.com 14

15 Date: Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service Global eadquarters: eraal eltech oldg.v. P.O. ox 38, 1700 eerhugowaard The Netherlands T F fo@aeraalbeltech.com