Ammeraal Beltech Modular

Size: px
Start display at page:

Download "Ammeraal Beltech Modular"

Transcription

1 mmeraal eltech Modular Innovative belt and chain solutions for every industry & application

2 Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14

3 Datasheet: uni S-MP C EN Plastic Modular elt Series uni S-MP C elt material & color POM-DI W PP W PP PE-I N Pin material & color PP W PP PE N Non standard material and color: See uni Material and Color Overview. lternative pin and lock materials: Lockpin: PT LG P6.6 N elt width Permissible tensile force (elt/pin material) P L T P (Nominal) elt weight (elt/pin material) POM-DI/PP PP/PP PE-I/PP POM-DI/PP PP/PP PE-I/PP mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft D Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 23.0 mm (0.91 in) Pin diameter: 5 mm (0.20 in) mm in mm in T L *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) **Return (pcs) PITCH 25.4 MM/1.00 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 76.0 mm (2.99 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) dditional standard belt widths are available in steps of 76.0 mm (2.99 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-DI 1100 N (247 lbf), PP 500 N (112 lbf), PE 500 N (112 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in). = Single Link 3

4 Datasheet: uni S-MP C ccessories Rubber Top C elt material & color Rubber material & color C Link Width mm in mm in mm in size mm in Flat PP W 03 N K K Non Standard material and color: See uni Material and Color Overview. ccessories Flight H Flat 13% Non Stick Material & color H Link Width Indent both sides mm in size mm in mm in 13% Non Stick POM-D W K PP-I W Flat PE-I N K ccessories Side Guard D E C F G Material & color C D E F G mm in mm in mm in mm in mm in mm in mm in Closed PP-I W Minimum indent to outside of side guide: 14.0 mm (0.55 in). Increment 6.4 mm (0.25). Non Standard material and color: See uni Material and Color Overview. ackflex radius for Side Guide: 75.0 mm (2.95 in). 4

5 Datasheet: uni S-MP C ccessories Tab V Z ottom Guide elt material & color POM-DI W PP W V Z Link Width mm in mm in mm in mm in size mm in K Non Standard material and color: See uni Material and Color Overview. ccessories mflight H 1 H H 2 Material & color H H 1 H 2 mm in mm in mm in Push PE W Other Non Standard option: See uni mflight Overview. W (elt width) mm in C min min C PI max W W PI PI min Increment: 12.7 mm (0.50 in). 5

6 Datasheet: uni S-MP C Sprocket No. of teeth Pilot bore in mm ore size Overall diameter Pitch diameter Hubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z06 x , x x Z08 x , x x Z10 x , x x Z12 x x x Z15 x x x Z20 x x x Molded sprocket Molded sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 12.7 mm (0.50 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni S-MP. For more detailed sprocket information, contact Customer Service. uni S-MP C/ Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 6

7 Datasheet: uni S-MP CS 22% EN Plastic Modular elt Series uni S-MP 22% CS Photo will be updated elt material & color POM-DI W PP W PP PE-I N Pin material & color elt width PP W PP PE N Non standard material and color: See uni Material and Color Overview. lternative pin and lock materials: Lockpin: PT LG P6.6 N Permissible tensile force (elt/pin material) P L X elt weight (elt/pin material) POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft D P (Nominal) Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Curved Surface Surface opening: 22% ackflex radius: 23.0 mm (0.91 in) Pin diameter: 5 mm (0.20 in) mm in mm in X L *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) **Return (pcs) PITCH 25.4 MM/1.00 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 76.0 mm (2.99 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) dditional standard belt widths are available in steps of 76.0 mm (2.99 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-DI 1100 N (247 lbf), PP 500 N (112 lbf), PE 500 N (112 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in). = Single Link 7

8 Datasheet: uni S-MP CS 22% ccessories Flight H CS Flat Material & color H Link Width Indent both sides mm in size mm in mm in CS Flat POM-D W PP-I W PE-I N K

9 Datasheet: uni S-MP CS 22% Sprocket No. of teeth Pilot bore in mm ore size Overall diameter Pitch diameter Hubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z06 x , x x Z08 x , x x Z10 x , x x Z12 x x x Z15 x x x Z20 x x x Molded sprocket Molded sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 12.7 mm (0.50 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni S-MP. For more detailed sprocket information, contact Customer Service. 9

10 Datasheet: uni S-MP CS 22% uni S-MP CS 22%/ Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 10

11 Datasheet: uni S-MP N EN Plastic Modular elt Series uni S-MP N elt material & color POM-DI W PE-I N PE-I Pin material & color PP W PE N PE N Non standard material and color: See uni Material and Color Overview. lternative pin and lock materials: Lockpin: PT LG P6.6 D N PP *Single Link K2000 is availble with a molded indent of 38.6mm(1.52in) in both sides. elt width Permissible tensile force (elt/pin material) P R L P (Nominal) elt weight (elt/pin material) POM-DI/PP PE-I/PE POM-DI/PP PE-I/PE mm in N lbf N lbf kg/m lb/ft kg/m lb/ft T Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: No Cling Surface opening: Closed ackflex radius: 23.0 mm (0.91 in) Pin diameter: 5 mm (0.20 in) mm in mm in L R T *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) * **Return (pcs) PITCH 25.4 MM/1.00 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 76.0 mm (2.99 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) dditional standard belt widths are available in steps of 76.0 mm (2.99 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-DI 1100 N (247 lbf), PE 500 N (112 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in) = Single Link 11

12 Datasheet: uni S-MP N ccessories Flight H Flat 13% Non Stick Material & color H Link Width Indent both sides mm in size mm in mm in 13% Non Stick POM-D W K PP-I W Flat PE-I N K ccessories Side Guide D E C F G Material & color C D E F G mm in mm in mm in mm in mm in mm in mm in Closed PP-I W Minimum indent to outside of side guide: 14.0 mm (0.55 in). Increment 6.4 mm (0.25). Non Standard material and color: See uni Material and Color Overview. ackflex radius for Side Guide: 75.0 mm (2.95 in). 12

13 Datasheet: uni S-MP N Sprocket No. of teeth Pilot bore in mm ore size Overall diameter Pitch diameter Hubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z06 x , x x Z08 x , x x Z10 x , x x Z12 x x x Z15 x x x Z20 x x x Molded sprocket Molded sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 12.7 mm (0.50 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni S-MP. For more detailed sprocket information, contact Customer Service. 13

14 Datasheet: uni S-MP N uni S-MP N/ Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 14

15 Local Contacts ustria T info-de@ammeraalbeltech.com India T info-in@ammeraalbeltech.com Sweden T info-se@ammeraalbeltech.com elgium T info-be@ammeraalbeltech.com Italy T info-it@ammeraalbeltech.com Switzerland T info-ch@ammeraalbeltech.com Canada T info-ca@ammeraalbeltech.com Luxembourg T info-lu@ammeraalbeltech.com Thailand T info-th@ammeraalbeltech.com Chile T info-cl@ammeraalbeltech.com Malaysia T info-my@ammeraalbeltech.com United Kingdom T info-uk@ammeraalbeltech.com China T info-cn@ammeraalbeltech.com.cn Netherlands T info-nl@ammeraalbeltech.com United States T info-us@ammeraalbeltech.com Czech Republic T info-cz@ammeraalbeltech.com Denmark T info-dk@ammeraalbeltech.com Poland T info-pl@ammeraalbeltech.com Portugal T info-pt@ammeraalbeltech.com Vietnam T info-vn@ammeraalbeltech.com.vn Expert advice, quality solutions and local service for all your belting needs Finland T info-fi@ammeraalbeltech.com Singapore T info-sg@ammeraalbeltech.com Conveyor elts Timing elts France T info-fr@ammeraalbeltech.com Germany T info-de@ammeraalbeltech.com Hungary T info-hu@ammeraalbeltech.com Slovakia T info-sk@ammeraalbeltech.com South Korea T info-kr@ammeraalbeltech.com Spain T info-es@ammeraalbeltech.com Global Headquarters: mmeraal eltech Holding.V. P.O. ox Heerhugowaard The Netherlands T +31 (0) F +31 (0) info@ammeraalbeltech.com Seamless elts Modular elts Transmission elts Fabrication & service... and 150 more service contact points on Date:

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular

More information

Soliflex PRO & Soliflex PRO mini

Soliflex PRO & Soliflex PRO mini EN Introducing the Soliflex PRO mini Soliflex PRO & Soliflex PRO mini NEW The Ultimate Hygienic Belt A Win-Win for the Food Industry: Ultimate hygiene and lower total cost of ownership With over 65 years

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM

More information

Belts for the Tobacco Industry. Your business is our business!

Belts for the Tobacco Industry. Your business is our business! EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing

More information

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative

More information

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6 Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color

More information

PROFILES. Overview Standard Profiles.

PROFILES. Overview Standard Profiles. EN PROFILES Overview Standard Profiles 2 On the basis of its many years interaction with engineers and end users, Ammeraal Beltech has developed a comprehensive range of profiled belts, capable of meeting

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex

More information

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color

More information

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.

More information

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color

More information

P (Nominal) L T mm in N lbf kg/m lb/ft

P (Nominal) L T mm in N lbf kg/m lb/ft Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and

More information

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular

More information

(Nominal) Belt weight (Belt/pin material)

(Nominal) Belt weight (Belt/pin material) Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6

More information

(Nominal) L Belt weight (Belt/pin material)

(Nominal) L Belt weight (Belt/pin material) N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal

More information

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:

More information

P (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft

P (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.

More information

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:

More information

P (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE

P (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:

More information

uni CSB The versatile plastic modular belt for the Automotive Industry

uni CSB The versatile plastic modular belt for the Automotive Industry uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information

T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile

More information

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6. Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt

More information

Overview Standard Profiles

Overview Standard Profiles EN profiles Overview Standard Profiles www.rydell.com.au 2 On the basis of its many years interaction with engineers and end users, Ammeraal Beltech has developed a comprehensive range of profiled belts,

More information

Belts for the Bakery Industry. Your business is our business! Ammeraal Beltech knows your process for all your belting needs just-in-time delivery

Belts for the Bakery Industry. Your business is our business! Ammeraal Beltech knows your process for all your belting needs just-in-time delivery EN Helping you bake it better! Your business is our business! Belts for the Bakery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery Knowing your production

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates

More information

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information

POM-SFL/PP POM-EC/PP

POM-SFL/PP POM-EC/PP elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6

More information

RAPPLON Tools & Accessories Catalogue. Issue for workshop staff & fitters.

RAPPLON Tools & Accessories Catalogue. Issue for workshop staff & fitters. RAPPLON Tools & Accessories Catalogue Issue for workshop staff & fitters 1 www.ammeraalbeltech.com Introduction The RAPPLON Tools and Accessories Catalogue features a complete range of tools for fabrication

More information

Your business is our business!

Your business is our business! EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing

More information

Your business is our business!

Your business is our business! GB Your business is our business! Belts for the Wood Industry Ammeraal Beltech:» knows your process» for all your belting needs» just-in-time delivery www.ammeraalbeltech.com Knowing your production process

More information

Infographics on Electromobility (January 2019)

Infographics on Electromobility (January 2019) Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS

More information

Total credit to the non-financial sector (core debt), % of GDP Table F1.1

Total credit to the non-financial sector (core debt), % of GDP Table F1.1 Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0

More information

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars) Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721

More information

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

NEW. Modular Belt selection. > uni Flex L-ASB > uni Flex L-ASB T > uni Flex L-ASB R. The brand for plastic modular belts and chains

NEW. Modular Belt selection. > uni Flex L-ASB > uni Flex L-ASB T > uni Flex L-ASB R. The brand for plastic modular belts and chains UK EW Modular elt selection > uni Flex L-S > uni Flex L-S T > uni Flex L-S R The brand for plastic modular belts and chains uni Flex L-S Pitch 5.8 mm (2. in.) uni Flex L-S This new generation of 2 in.

More information

Rectangular photoelectric proximity switches

Rectangular photoelectric proximity switches Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating

More information

Photo courtesy of NZTA

Photo courtesy of NZTA international comparisons for road deaths Photo courtesy of NZTA 14 Motor Vehicle Crashes in New Zealand international comparisons for road deaths 141 Contents TABLES Table 1 International comparison of

More information

BP Statistical Review of World Energy June 2017

BP Statistical Review of World Energy June 2017 BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28

More information

Global Dialysis - Cost per Dialysis Session

Global Dialysis - Cost per Dialysis Session Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis

More information

NEW. Plastic Modular Belt Series > uni RTB M1 > uni RTB M2

NEW. Plastic Modular Belt Series > uni RTB M1 > uni RTB M2 UK NEW Plastic Modular Belt Series > > uni RTB 2 Pitch 50.8 (2.00 in.) uni RTB - State of The Art in Roller Top Modular Belts The new uni RTB belt is the most flexible and reliable handling solution for

More information

The new STx chain hoist NEW. Sophisticated technology prepared for the future

The new STx chain hoist NEW. Sophisticated technology prepared for the future The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing

More information

Engineered Belts. Combined material solutions for precision and customized product control

Engineered Belts. Combined material solutions for precision and customized product control EN Engineered Belts Combined material solutions for precision and customized product control Engineering techniques and covering materials Precision ground profiles on any axis of the belt or cover, control

More information

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018 QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and

More information

Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition

Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217

More information

uni Flex L-ASB Sideflexing

uni Flex L-ASB Sideflexing uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version

More information

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications

More information

Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004

Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker

More information

uni MPB Straight running

uni MPB Straight running 88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt

More information

uni MPB Straight running

uni MPB Straight running 87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt

More information

Fork through-beam sensors

Fork through-beam sensors Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity

More information

NI PS-15/16/17 Side Mount Brackets

NI PS-15/16/17 Side Mount Brackets INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power

More information

Product Overview INCH

Product Overview INCH INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment

More information

Lifting Instructions for 1336 PLUS and FORCE D Frame Drives

Lifting Instructions for 1336 PLUS and FORCE D Frame Drives Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS

More information

Mechatronic brake system INTORQ Control

Mechatronic brake system INTORQ Control Mechatronic brake system INTORQ Control for industrial trucks, escalators and cranes setting the standard The mechatronic brake system = INTORQ Control + INTORQ BFK458 spring-applied brake Spring-applied

More information

uni Flex SNB Sideflexing

uni Flex SNB Sideflexing uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has

More information

Made UNDER high pressure

Made UNDER high pressure Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.

More information

1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area

1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area 1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315

More information

Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy

Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized

More information

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications Mineral Industry Drive solutions for reclaimers, stackers, bulk conveyors applications A world specialist in drive systems World leader in the design and production of alternators and motors, Leroy-Somer,

More information

Fork through-beam sensors

Fork through-beam sensors Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity

More information

67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production

67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed

More information

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3. Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35

More information

Information Technology and Economic Development: An Introduction to the Research Issues

Information Technology and Economic Development: An Introduction to the Research Issues November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995

More information

ALLROUNDER 320 C GOLDEN EDITION

ALLROUNDER 320 C GOLDEN EDITION Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions

More information

Imports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports

Imports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy

More information

DOUBLE OCTOMILL TM PRODUCT RANGE

DOUBLE OCTOMILL TM PRODUCT RANGE DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch

More information

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207

More information

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) ) Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342

More information

ALLROUNDER 270 C GOLDEN EDITION

ALLROUNDER 270 C GOLDEN EDITION Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33

More information

ALLROUNDER 570 C GOLDEN EDITION

ALLROUNDER 570 C GOLDEN EDITION Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q1 2015 ALTERNATIVE FUEL VEHICLE registrations: +28.8% in in first quarter In the first quarter of 2015, total alternative fuel vehicle (AFV) registrations

More information

I. Global wine markets,

I. Global wine markets, I. Global wine markets, 2007-09 Table 1: Summary of the world's wine markets, 2007-09 (annual average) Vine % of cropland Wine Wine Wine Wine Wine Per adult wine Pop- GDP GDP Area under vines produced

More information

testing to perfection MultiTest-i Technical Datasheet

testing to perfection MultiTest-i Technical Datasheet testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359

More information

The uni SNB M2 belt increases performance in the following industries/applications:

The uni SNB M2 belt increases performance in the following industries/applications: uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface

More information

Urchin 7 cflag.ifas.ufl.edu Page 1 of 2 Standard View Export All Visits Permalink Geo Location Jul 1, 2015 - Jul 31, 2015 First Date 2015 Compare to Past Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

More information

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015

NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015 NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q2 2015 New alternative fuel vehicle (AFV) registrations in the EU by engine type Q2 2014 Q2 2015 Thousand units 70 60 50 40 30 20 10 0 EVs HEVs AFVs other

More information

TUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water)

TUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water) Turbine Wheel Flowmeter Plastic Model for Liquids measuring monitoring analyzing TUR TUR with Transmitter TUR with ADI-1 Measuring Ranges: 5.3...88 GPM or 11...440 GPM (Water) Measuring Accuracy: ± 1%

More information

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29. Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7

More information

INSTALLATION GUIDE NI WSN-3291 Outdoor IP Enclosure For NI WSN-32xx Series Devices

INSTALLATION GUIDE NI WSN-3291 Outdoor IP Enclosure For NI WSN-32xx Series Devices INSTALLATION GUIDE NI WSN-3291 Outdoor IP Enclosure For NI WSN-32xx Series Devices This installation guide describes how to install and use the National Instruments WSN-3291 outdoor IP enclosure. The NI

More information

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400 Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330

More information

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200 Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

More information

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800 Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330

More information

DIE STORAGE GAS SPRING

DIE STORAGE GAS SPRING DIE STORGE GS SPRING Worldwide NITROGS is a global company that has a worldwide presence through its own network of subsidiaries and extensive distributor network. NITROGS SPRINGS GMBH Frankfurt, Germany

More information

Production of heat by type Terajoules

Production of heat by type Terajoules Production of heat by type Table Notes geo represents heat used directly for district heating, agriculture etc. without a commercial transaction taking place. Please refer to the Definitions Section on

More information

Global Valuation Summary - SAMPLE PAGES

Global Valuation Summary - SAMPLE PAGES - SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations

More information

RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017

RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017 RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017 Corporates 4 0.57% 0.81% 0.84% 0.81% 4 8.75% 17.51% 26.12% 22.73% 57 0.23% 0.45% 1.66% 1.64% 58 33.81% 42.41% 45.00% 29.97% Corporates - Of Which: Specialised

More information

RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017

RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017 RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017 Corporates 10 1.22% 4.02% 26.81% 1.95% 9 15.68% 32.84% 36.64% 31.60% 51 0.20% 1.00% 4.08% 2.02% 54 34.12% 43.96% 45.10% 29.73% Corporates - Of Which:

More information

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395

More information

UXC.COM A PUBLICATION OF. NPO Overview 1501 MACY DRIVE ROSWELL, GA PH FX

UXC.COM A PUBLICATION OF. NPO Overview 1501 MACY DRIVE ROSWELL, GA PH FX 2019 A PUBLICATION OF UXC.COM NPO Overview 1501 MACY DRIVE ROSWELL, GA 30076 PH +1 770 642-7745 FX +1 770 643-2954 NOTICE UxC, LLC ( UxC ) shall have title to, ownership of, and all proprietary rights

More information