Ammeraal Beltech Modular
|
|
- Dylan Mitchell
- 5 years ago
- Views:
Transcription
1 Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application
2 Content uni X-MPB C page 3-4
3 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running direction Belt material & color POM-DI W PE-I N Pin and lock material & color PA6.6 N Non standard material and color: See uni Material and Color Overview. Alternative pin and lock materials: Lockpin: PP W PBT LG Belt width Permissible tensile force (Belt/pin material) P P (Nominal) L T Straight running belt Nominal pitch: 63.5 mm (2.50 in) Surface type: Flat Surface opening: Closed Backflex radius: 75 mm (2.95 in) Pin diameter: ø8 mm (0.31 in) mm in mm in T L Belt weight (Belt/pin material) POM-DI/PA6.6 PE-I/PA6.6 POM-DI/PA6.6 PE-I/PA6.6 mm in N lbf N lbf kg/m lb/ft kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) **Return (pcs) Pitch 63.5 mm/2.50 in STRAIGHT RUNNING Standard Additional standard belt widths are available in steps of 75.5 mm (2.97 in.) Additional non-standard belt widths are available in steps of 25.2 mm (0.99 in.) Additional standard belt widths are available in steps of 75.5 mm (2.97 in.) Additional non-standard belt widths are available in steps of 25.2 mm (0.99 in.) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. Belt material: POM-DI 4000 N (899 lbf),pe-i 3000 N (674 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.) = Single Link 3
4 Datasheet: uni X-MPB C Accessories Flight Running direction H Type Material & color H Width Indent Link size mm in mm in mm in Non Standard material and color: See uni Material and Color Overview. Sprocket Flat POM-DI W K No of teeth Pilot Bore in mm Bore size Overall diameter Pitchdiameter Hubdiameter A-dimension B-dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded PA6 LG Machined PA6 N Z06 x x x Z08 x x x Z10 x x x Z13 x x x Molded sprocket Machined sprocket Molded sprocket Machined sprocket Non standard material and color: See uni Material and Color Overview. B A Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 12.0 mm (0.47 in) Width of sprocket = 43.3 mm (1.67 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni X-MPB. For more detailed sprocket information, contact Customer Service. uni X-MPB C/1309 Conveyor Seamless Modular Timing Solid advice For all your belting needs Local stock & service This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission Fabriation & service Ammeraal Beltech Modular A/S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 4
5 Local Contacts Austria T info-de@ammeraalbeltech.com India T info-in@ammeraalbeltech.com Sweden T info-se@ammeraalbeltech.com Belgium T info-be@ammeraalbeltech.com Italy T info-it@ammeraalbeltech.com Switzerland T info-ch@ammeraalbeltech.com Canada T info-ca@ammeraalbeltech.com Luxembourg T info-lu@ammeraalbeltech.com Thailand T info-th@ammeraalbeltech.com Chile T info-cl@ammeraalbeltech.com Malaysia T info-my@ammeraalbeltech.com United Kingdom T info-uk@ammeraalbeltech.com China T info-cn@ammeraalbeltech.com.cn Netherlands T info-nl@ammeraalbeltech.com United States T info-us@ammeraalbeltech.com Czech Republic T info-cz@ammeraalbeltech.com Denmark T info-dk@ammeraalbeltech.com Poland T info-pl@ammeraalbeltech.com Portugal T info-pt@ammeraalbeltech.com Vietnam T info-vn@ammeraalbeltech.com.vn Expert advice, quality solutions and local service for all your belting needs Finland T info-fi@ammeraalbeltech.com Singapore T info-sg@ammeraalbeltech.com Conveyor Belts Timing Belts France T info-fr@ammeraalbeltech.com Germany T info-de@ammeraalbeltech.com Hungary T info-hu@ammeraalbeltech.com Slovakia T info-sk@ammeraalbeltech.com South Korea T info-kr@ammeraalbeltech.com Spain T info-es@ammeraalbeltech.com Global Headquarters: Ammeraal Beltech Holding B.V. P.O. Box AA Heerhugowaard The Netherlands T +31 (0) F +31 (0) info@ammeraalbeltech.com Seamless Belts Modular Belts Transmission Belts Fabrication & service... and 150 more service contact points on Date:
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series
More informationSoliflex PRO & Soliflex PRO mini
EN Introducing the Soliflex PRO mini Soliflex PRO & Soliflex PRO mini NEW The Ultimate Hygienic Belt A Win-Win for the Food Industry: Ultimate hygiene and lower total cost of ownership With over 65 years
More informationBelts for the Tobacco Industry. Your business is our business!
EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing
More informationPROFILES. Overview Standard Profiles.
EN PROFILES Overview Standard Profiles 2 On the basis of its many years interaction with engineers and end users, Ammeraal Beltech has developed a comprehensive range of profiled belts, capable of meeting
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:
More informationuni CSB The versatile plastic modular belt for the Automotive Industry
uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More informationOverview Standard Profiles
EN profiles Overview Standard Profiles www.rydell.com.au 2 On the basis of its many years interaction with engineers and end users, Ammeraal Beltech has developed a comprehensive range of profiled belts,
More informationBelts for the Bakery Industry. Your business is our business! Ammeraal Beltech knows your process for all your belting needs just-in-time delivery
EN Helping you bake it better! Your business is our business! Belts for the Bakery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery Knowing your production
More informationT L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More informationRAPPLON Tools & Accessories Catalogue. Issue for workshop staff & fitters.
RAPPLON Tools & Accessories Catalogue Issue for workshop staff & fitters 1 www.ammeraalbeltech.com Introduction The RAPPLON Tools and Accessories Catalogue features a complete range of tools for fabrication
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationP (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
More informationPOM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More informationYour business is our business!
EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationYour business is our business!
GB Your business is our business! Belts for the Wood Industry Ammeraal Beltech:» knows your process» for all your belting needs» just-in-time delivery www.ammeraalbeltech.com Knowing your production process
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationBottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationEngineered Belts. Combined material solutions for precision and customized product control
EN Engineered Belts Combined material solutions for precision and customized product control Engineering techniques and covering materials Precision ground profiles on any axis of the belt or cover, control
More informationP (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE
Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
More informationT L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationTotal credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
More informationInfographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
More informationNEW. Plastic Modular Belt Series > uni RTB M1 > uni RTB M2
UK NEW Plastic Modular Belt Series > > uni RTB 2 Pitch 50.8 (2.00 in.) uni RTB - State of The Art in Roller Top Modular Belts The new uni RTB belt is the most flexible and reliable handling solution for
More informationGlobal Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationPOM-SFL/PP POM-EC/PP
elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6
More informationPhoto courtesy of NZTA
international comparisons for road deaths Photo courtesy of NZTA 14 Motor Vehicle Crashes in New Zealand international comparisons for road deaths 141 Contents TABLES Table 1 International comparison of
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationBP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationThe new STx chain hoist NEW. Sophisticated technology prepared for the future
The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More informationNI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
More informationThermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
More informationProduct Overview INCH
INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment
More informationALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More information1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area
1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315
More informationNEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015
NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q1 2015 ALTERNATIVE FUEL VEHICLE registrations: +28.8% in in first quarter In the first quarter of 2015, total alternative fuel vehicle (AFV) registrations
More informationNEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015
NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q2 2015 New alternative fuel vehicle (AFV) registrations in the EU by engine type Q2 2014 Q2 2015 Thousand units 70 60 50 40 30 20 10 0 EVs HEVs AFVs other
More informationMechatronic brake system INTORQ Control
Mechatronic brake system INTORQ Control for industrial trucks, escalators and cranes setting the standard The mechatronic brake system = INTORQ Control + INTORQ BFK458 spring-applied brake Spring-applied
More informationALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
More informationNCP/NCB/NCS. Magnetic Float Switches. for Liquids
Magnetic Float Switches for Liquids measuring monitoring analyzing NCP/NCB/NCS Available Materials: Brass, SS, NBR, Polypropylene, and PVC Maximum Pressure: 400 PSIG Maximum Temperature: 300 F Single Point
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017 Corporates 4 0.57% 0.81% 0.84% 0.81% 4 8.75% 17.51% 26.12% 22.73% 57 0.23% 0.45% 1.66% 1.64% 58 33.81% 42.41% 45.00% 29.97% Corporates - Of Which: Specialised
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017 Corporates 10 1.22% 4.02% 26.81% 1.95% 9 15.68% 32.84% 36.64% 31.60% 51 0.20% 1.00% 4.08% 2.02% 54 34.12% 43.96% 45.10% 29.73% Corporates - Of Which:
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationMade UNDER high pressure
Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
More informationALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
More informationALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
More informationImports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports
USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy
More information820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
More informationEmissions per capita and GDP
Emissions per capita and GDP (1990 -) CEIP Centre on Emission Inventories and Projections Emissions per capita and emissions per GDP were calculated for all years from 1990 to where data was available
More informationALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
More informationALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
More informationProduction of heat by type Terajoules
Production of heat by type Table Notes geo represents heat used directly for district heating, agriculture etc. without a commercial transaction taking place. Please refer to the Definitions Section on
More informationNEW PASSENGER CAR REGISTRATIONS BY ALTERNATIVE FUEL TYPE IN THE EUROPEAN UNION 1 Quarter
PRESS EMBARGO: NEW PASSENGER CAR REGISTRATIONS BY ALTERNATIVE FUEL TYPE IN THE EUROPEAN UNION 1 Quarter 3 2017 Alternative fuel vehicle registrations: +51.4% in third quarter of 2017 In the third quarter
More informationTUR. Turbine Wheel Flowmeter. Plastic Model for Liquids. Measuring Ranges: GPM or GPM (Water)
Turbine Wheel Flowmeter Plastic Model for Liquids measuring monitoring analyzing TUR TUR with Transmitter TUR with ADI-1 Measuring Ranges: 5.3...88 GPM or 11...440 GPM (Water) Measuring Accuracy: ± 1%
More informationALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
More informationALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
More informationALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
More informationALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
More informationALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
More informationGlobal Valuation Summary - SAMPLE PAGES
- SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations
More information67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
More informationNEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter
PRESS EMBARGO: NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter 1 2018 Next press release: Thursday 6 September 2018 1 Data for Croatia, Cyprus, Luxembourg and Malta is not available Page
More informationACEA Report. Vehicles in use Europe 2017
ACEA Report Vehicles in use Europe 2017 TABLE OF CONTENTS Summary... 2 Vehicles in use in Europe... 3 Passenger cars... 3 Light commercial vehicles... 4 Medium and heavy commercial vehicles... 5 Buses...
More informationALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
More informationALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
More informationEuropean Aerosol Production 2016
European Aerosol Production 216 EUROPEAN AEROSOL FEDERATION Boulevard du Souverain 165 116 Brussels - Belgium Phone: + 32.2.679.62.8 Fax: + 32.2.679.62.83 info@aerosol.org - www.aerosol.org FEA 216 All
More informationNEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter
PRESS EMBARGO: NEW PASSENGER CARS BY FUEL TYPE IN THE EUROPEAN UNION 1 Quarter 1 2018 Next press release: Thursday 6 September 2018 1 Data for Croatia, Cyprus, Luxembourg and Malta is not available Page
More informationTest Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
More informationBREXIT AND THE AUTO INDUSTRY: FACTS AND FIGURES
BREXIT AND THE AUTO INDUSTRY: FACTS AND FIGURES GLOBAL TRADE European Union EU vehicle imports: Total value: 45,693 million Quantity: 3,395,419 units EU vehicle exports: Total value: 135,398 million Quantity:
More information