T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

Transcription

1 lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile force T (ominal) R Straight running belt ominal pitch: 19.1 mm (0.75 in) Surface type: Rib Top Surface opening: Closed ackflex radius: 50.0 mm (2.0 in) in diameter: ø5.0 mm (0.20 in) mm in mm in T R lternative pin and lock materials: in: W W 6.6 T SS304 W ockpin: T 6.6 D W elt weight OM-/6.6 /6.6 6/T-R OM-/6.6 /6.6 6/T-R mm in lbf lbf lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft *Min. o. drive sprocket per shaft umber of wear strips (Min. o.) **Carry **Return itch 19.1 mm/0.75 in STRIT RUI O Standard eneral belt tolerance is +0/-0.4% at 23 C/73 and 50% R. or exact belt width contact Customer Service. on standard belt width on request. *Max. oad per Drive Sprocket. elt material: OM (281 lbf), 700 (157 lbf), (281 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.)

2 ccessories inger late M O 2 C D K J I 1 3 Single Sided Single Sided Double Sided Material & color OM- R OM-DI OM-C K C D mm in mm in mm in mm in mm in mm in I J K M O mm in mm in mm in mm in mm in mm in mm in mm in mm in ll uni-chains belt systems are available in a raised rib version that can be supplied with matc h ing finger plates, also called combs. The finger plates are supplied with cover caps which can be attached when the finger plate has been installed. The cover caps can be removed by using a screwdriver that can be in serted between the cover and finger plate. In order to adjust to belt width variations caused by temperature fluctuations. a slider facilitates the sideways movement of the finger plates. on Standard material and color: See uni Material and Color Overview.

3 Sprocket o of teeth ilot bore in mm ore size Overall diameter itchdiameter ubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded 6 Machined 6 Z07 x x x Z10 x x x Z17 x x x Z24 x x x Z25 x x x on standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 4.8 mm (0.19 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. or correct sprocket position: See uni ssembly Instructions for uni ight. or more detailed sprocket information. contact Customer Service.

4 Datasheet: uni ight Vacuum lastic Modular elt Series uni ight Vacuum elt material & color in material & color Running direction OM- R 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile force T (ominal) Straight running belt ominal pitch: 19.1 mm (0.75 in) Surface type: lat Surface opening: Closed ackflex radius: 25.0 mm (1.0 in) in diameter: ø3.9 mm (0.15 in) mm in mm in T lternative pin and lock materials: in: W W 6.6 T SS304 W ockpin: T 6.6 D W elt weight OM-/6.6 /6.6 6/T-R OM-/6.6 /6.6 6/T-R mm in lbf lbf lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft *Min. o. drive sprocket per shaft umber of wear strips (Min. o.) **Carry **Return itch 19.1 mm/0.75 in STRIT RUI O Standard eneral belt tolerance is +0/-0.4% at 23 C/73 and 50% R. or exact belt width contact Customer Service. on standard belt width on request. *Max. oad per Drive Sprocket. elt material: OM (281 lbf), 700 (157 lbf), (281 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.)

5 Datasheet: uni ight Vacuum Sprocket o of teeth ilot bore in mm ore size Overall diameter itchdiameter ubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded 6 Machined 6 Z07 x x x Z10 x x x Z17 x x x Z24 x x x Z25 x x x on standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet Width of tooth = 4.8 mm (0.19 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. or correct sprocket position: See uni ssembly Instructions for uni ight. or more detailed sprocket information. contact Customer Service.