STRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/
|
|
|
- Melanie Nicholson
- 5 years ago
- Views:
Transcription
1 STAIHT UNNIN STEE CHAINS Series 812/ / /802/ SIDEFEXIN STEE CHAINS Series O TAB - 881O TAB 881M MO MO M 8857 TAB A OU STEE CHAINS OFFE: HIH WOKIN OAD HIH WEA ESISTANCE EXCEENT SUFACE FINISH OPTIMUM PEFOMANCE CONSISTENT HIH QUAITY
2 STAIHT UNNIN CHAINS SINE HINE Ø TAVE Complete program to cover all applications All materials All sizes Flatness Polished Width working load μm (max) hinges S 815 K S 815 K S 815 K ½ 2.7 S 815 K C no S 815 K ½ 3.3 S 815 K S 815 K ½ 5.1 SS 812 K SS 812 K SS 812 K SS 812 K ½ 2.7 STANDA no SS 812 K SS 812 K ½ 3.3 SS 812 K SS 812 K ½ 5.1 SSE 815 K SSE 815 K SSE 815 K SSE 815 K ½ 2.7 EXTA PUS no SSE 815 K SSE 815 K ½ 3.3 SSE 815 K SSE 815 K ½ 5.1 SSE 815 K325 HB EXTA PUS HB no SSE 815 K330 HB SSA 815 K SSA 815 K SSA 815 K ½ 2.7 SSA 815 K AUSTIC no SSA 815 K ½ 3.3 SSA 815 K SSA 815 K ½ 5.1 Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
3 (SPEED - INE) STAIHT UNNIN CHAINS SINE HINE Ø TOP OF THE INE TAVE The best choice for the most demanding applications, like pressureless combiners and high speed applications Improved flatness Optimum product stability STAIHT UNNIN CHAINS SINE HINE working load μm SS 812 K STANDA SSE 815 K EXTA PUS SSE 815 K325 HB EXTA PUS HB Flatness (max) Polished hinges Width 0.1 no SPEED - INE STAIHT UNNIN CHAINS SINE HINE Flatness Polished Width working load μm (max) hinges SPC 815 K SPC 815 K EXTA PUS SPS 815 K SPS 815 K yes SPC 815 K325 HB SPC 815 K330 HB EXTA PUS HB SPS 815 K325 HB SPS 815 K330 HB Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN 8153 S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e
4 STAIHT UNNIN CHAINS DOUBE HINE Very high strength. For heavy duty applications TAVE Width working load μm S 800 K not C S 800 K applicable SS 802 K STANDA SS 802 K ½ SSE 805 K EXTA PUS SSE 805 K SSE 805 K750 HB HB SSA 805 K AUSTIC STAIHT UNNIN CHAINS HEAVY DUTY SINE HINE Ø High strength Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also BP chains and rubber top chains TAVE SSE 8157 K EXTA PUS SSE 8157 K750 HB HB working load μm Width ½ Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
5 STAIHT UNNIN CHAINS SINE HINE - Pitch 25.4 (1 ) Ø 6.35 TAVE Small pitch offering short product transfers Page 281 Width working load μm SSE 515 K SSE 515 K SSE 515 K ½ 2.5 SSE 515 K EXTA SSE 515 K SSE 515 K ½ 3.0 SSE 515 K Standard length: 120 pitches (10 ft m) Breaking oad according to Standard ISO DIN 8153 S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e
6 881 SIDEFEXIN CHAINS - BEVE SYSTEM = TAVE Width working load μm Straight Curving SSE 881 K SSE 881 K EXTA ½ 3.70 SSE 881 K ½ SSA 881 K SSA 881 K AUSTIC ½ 3.70 SSA 881 K ½ O SIDEFEXIN CHAINS - BEVE SYSTEM = TAVE The enlarged surface of our 8810 series offers improved product support compared to the 881 series Width working load μm Straight Curving SSE 881O K SSE 881O K ½ 3.20 SSE 881O K ½ 3.70 EXTA PUS SSE 881O K ½ 5.50 SSS 881O K SSS 881O K ½ 3.20 SUPE FINISH Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
7 SIDEFEXIN CHAINS - TAB SYSTEM 881 TAB 19.4 = TAVE Width working load μm SSE 881 TAB K SSE 881 TAB K EXTA ½ 3.70 SSE 881 TAB K ½ SSA 881 TAB K SSA 881 TAB K AUSTIC ½ 3.70 SSA 881 TAB K ½ 5.50 SIDEFEXIN CHAINS - TAB SYSTEM 881O TAB 19.4 = TAVE The enlarged surface of our 8810 series offers improved product support compared to the 881 series Width working load μm SSE 881O TAB K SSE 881O TAB K ½ 3.20 EXTA PUS SSE 881O TAB K ½ 3.70 SSE 881O TAB K ½ 5.50 Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN 8153 S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e
8 881 M MO SIDEFEXIN CHAINS FO MANETIC SYSTEM =80 27 TAVE The chains series 881 M and 8857 M are securely retained in the curve by magnets located under the hinge of the chain in the upper part of curve. As there are no TAB or BEVE shoes on these chains they can be easily removed from the curve for maintenance or for cleaning, without dismantling the chain. The enlarged surface of our 881 MO series offers improved product support compared to the 881 M series. Optimum flatness of chains in curves ess power consumption For high speed lines Best product transfer along as well as across the running direction On request and for adequate quantities these chains can be produced in: C45 Through Hardened Carbon Steel Note: Pin in Ferritic Stainless Steel Page Flatness Polished Width (max) hinges working load μm SS 881 MO K SS 881 MO K STANDA SS 881 M K ½ SS 881 M K ½ 4.90 SSE 881 MO K yes SSE 881 MO K EXTA PUS SSE 881 M K ½ SSE 881 M K ½ 4.90 SSE 881 MO K325 HB EXTA PUS HB SSE 881 MO K330 HB Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
9 (SPEED - INE) SIDEFEXIN CHAINS FO MANETIC SYSTEM 881 MO = SS 881 MO K STANDA SSE 881 MO K EXTA PUS SSE 881 MO K325 HB EXTA PUS HB 881 MO SIDEFEXIN CHAINS FO MANETIC SYSTEM All advantages of the magnetic system The best choice for the most demanding applications, like pressureless combiners and high speed applications Improved flatness Optimum product stability Flatness (max) Polished hinges 0.1 yes working load μm Width TAVE MO SPEED - INE SIDEFEXIN CHAINS FO MANETIC SYSTEM Flatness Polished Width (max) hinges working load μm SPC 881 MO K SPC 881 MO K EXTA PUS SPS 881 MO K SPS 881 MO K SUPE FINISH yes SPC 881 MO K325 HB SPC 881 MO K330 HB EXTA PUS HB SPS 881 MO K325 HB SPS 881 MO K330 HB SUPE FINISH SIDEFEXIN CHAINS FO MANETIC SYSTEM - HEAVY DUTY 8857M 57 = All advantages of the magnetic system High strength Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also BP chains and rubber top chains SSE 8857 M K EXTA PUS SSE 8857 M K750 HB HB working load μm Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN 8153 Width TAVE ½ S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e
10 8857 TAB SIDEFEXIN CHAINS - HEAVY DUTY = TAVE High strength Page 266 SSE 8857 TAB K EXTA PUS SSE 8857 TAB K750 HB HB Standard length: 80 pitches (10 ft m) working load μm Width ½ SIDEFEXIN PATE TOP CHAINS WITH BASE OE CHAINS (¾ ") PITCH = Ø 5.08 Ø High speed Very high loads onger conveyors Flights removeable ower noise No chain elongation Page 252 Page 259 TAVE Page 301 Width Chain - ef. Plate oller chain working load μm 1874 K C45 C SS K AUSTIC EXTA 1874A K C Standard length: 160 pitches (10 ft m) Breaking oad according to Standard ISO DIN S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
11 STAIHT UNNIN STEE CHAINS with high friction surface Series 815 V V MINI TAB V 805 V V TAB V SIDEFEXIN STEE CHAINS with high friction surface Series 881 V TAB V 8857 M V MO V A OU STEE CHAINS OFFE: HIH ESISTANCE TO WEA AND TEA WOKIN TEMPEATUE FOM -30 TO +120 C HIH ESISTANCE TO OI, EASE AND ACIDS INCINES UP TO MAX 20
12 815 V STAIHT UNNIN CHAINS SINE HINE WITH UBBE PADS Ø TAVE Flat top chains with vulcanized NB rubber Chain - ef. Width Chain ubber working load SSE 815 K325 V EXTA PUS NB V MINI STAIHT UNNIN CHAINS MINI HINE WITH UBBE PADS Ø TAVE Flat top chains with vulcanized NB rubber Chain - ef. Width Chain ubber working load SSE 815 K125 V EXTA PUS NB ¼ Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
13 STAIHT UNNIN CHAINS SINE HINE WITH TABS AND UBBE PADS 815 TAB V Ø TAVE Flat top chains with vulcanized NB rubber. Tabs reduce friction on the return section of the conveyor Chain - ef. Width Chain ubber working load SSE 815 TAB K325 V EXTA PUS NB STAIHT UNNIN CHAINS DOUBE HINE WITH UBBE PADS 805 V Flat top chains with vulcanized NB rubber TAVE Chain - ef. Width Chain ubber working load SSE 805 K750 V EXTA PUS NB ½ S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e
14 8157 V STAIHT UNNIN CHAINS - HEAVY DUTY SINE HINE WITH UBBE PADS Flat top chains with vulcanized NB rubber TAVE Width Chain - ef. Chain ubber working load SSE 8157 K750 V EXTA PUS NB ½ SSE 8157 K750 HB - V HB 8157 TAB V STAIHT UNNIN CHAINS - HEAVY DUTY SINE HINE WITH UBBE PADS Flat top chains with vulcanized NB rubber. Tabs reduce friction on the return section of the conveyor. Page 266 TAVE Width Chain - ef. Chain ubber working load SSE 8157 TAB K750 V EXTA PUS NB ½ SSE 8157 TAB K750 HB - V HB Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
15 82 82 SIDEFEXIN CHAINS WITH UBBE PADS 881 V = TAVE Sideflexing chains with vulcanized NB rubber Chain - ef. Width Chain ubber working load Straight Curving SSE 881 K325 V EXTA NB SIDEFEXIN CHAINS WITH UBBE PADS 881 TAB V = TAVE Sideflexing chains with vulcanized NB rubber. Tabs reduce friction on the return section of the conveyor Chain - ef. Width Chain ubber working load SSE 881 TAB K325 V EXTA NB Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN 8153 S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e
16 MO V SIDEFEXIN MANETIC CHAINS WITH UBBE PADS = Sideflexing chains with vulcanized NB rubber. All advantages of the magnetic system. High strength TAVE Chain - ef. Width Chain ubber working load SSE 881 MO K325 V EXTA PUS NB Standard length: 80 pitches (10 ft m) Breaking oad according to Standard ISO DIN M V SIDEFEXIN MANETIC CHAINS WITH UBBE PADS = Sideflexing chains with vulcanized NB rubber All advantages of the magnetic system High strength Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also BP chains and flat top chains. ON EQUEST, THIS CHAIN TYPE IS ASO AVAIABE WITH TABS. Page 210 TAVE Width Chain - ef. Chain ubber working load SSE 8857 M K750 V EXTA PUS NB ½ SSE 8857 M K750 HB V HB 30 S Y S T E M P A S T - C O N V E Y O C H A I N S - B E T S - I s s u e 6. 0
STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55
STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M
STRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP
SIGH UNNING CHINS with low noise accumulation rollers Series BP 821 - BP 8257 - BP 831 46 48 SIDFXING CHINS with low noise accumulation rollers Series BP 878 B - BP 879 M BP 882 B - BP 882 M 49 52 PPICION:
Series SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
CHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
PRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
Rexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
Modular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
TableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
TURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
DOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
GStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
ROSTA Tensioner Devices
OSTA Maintenance-free tensioner systems for belt and chain drives Easy to install available in 7 standard sizes wide range of accessories available Customer Benefits from using OSTA SE Guarantees the lowest
Finally all the action you were looking for!
Finally all the action you were looking for! System Plast presents an unprecedented range of products. Based on a long experience in the field, System Plast have worked hard on product development. Now
MATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
Material stand MS 3 - infinitely variable height-adjustable, capable of bearing up to 700 kg
Univesa chassis / Mateia stand / Roe and measuing conveyos Unicaft UF 0 - Univesa chassis to dispace saws, ginding machines, diing machines, paning machines, etc. Up to a oading capacity of 0 kg Fo easy
SP Stationary concrete pump. Concrete output max. 113 m³/h Concrete output max. 162 bar. 18,300-19,400 lb
SP 38 Stationary pump Concrete output max. 113 m³/h Concrete output max. bar Concrete output - 24 kw Machine weight 8,3-8,8 kg 18,3-19,4 b The SP 38 from SCHWING Performance and reiabiity SP 38 Stationary
Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
Accessories 95. Dust caps, Dust plugs Air blowers 94. Air guns 95. Threaded hose connectors, Revolving connectors 96. page.
Accessories 95 page Dust caps, Dust pugs 92-93 Air bowers 94 Air guns 95 Threae hose connectors, Revoving connectors 96 Accessoires 96 Pastic version Soft-PVC Poyurethane Dust caps Dust pugs Materias ow
May 2011 English Version Issue 3.6
E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power
ROSTA-Tensioner Devices
-Tensioner Devices Maintenance-free tensioner systems for belt and chain drives Easy to install available in 7 standard sizes wide range of accessories available Customer Benefits from using OST SE Guarantees
May 2009 English Version Issue 3.0
S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information
ROSTA Tensioner Devices
OSTA Maintenance-free tensioner systems for belt and chain drives Easy to install available in 7 standard sizes wide range of accessories available OSTA Customer Benefits from using OSTA SE Guarantees
Tri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
Caford NZ Ltd Ph: Fx: E -mail:
CAFO D CASTOS (NZ) TD Chap 1 Page 10 V ol ume 1, I ssue 1 Caford NZ td E -mail: Twin Wheel Castors 38-80 For oads Up To 50kg CAFOD DESIGN EASIY MOVED - ECONOMICA - ATTACTIVE - AGEST ANGE IN NEW ZEAAND
FIX-WHEEL RAILS. rationalisation, transportation, automation
FIX-WHEE RIS DBGM rationalisation, transportation, automation IN SOCK he following items can always be delivered immediately from stock: CCESSORIES broad range of standard accessories supplements and simplifies
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
Displacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 RPM GEAR PUMPS T3S
Dispacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 PM GEA PUMPS T3S Gear Pump Cataogue T3S TABE OF CONTENTS DESCIPTION......................................................................................................................
The right chain! High Performance from Rexnord. Roller chains Factory standard. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Roller chains Factory standard High Performance from Rexnord. The right chain! Factory standard Roller chains Tailored solutions for specific meets customer needs Inner link
Up to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
mk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
STEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
SP30 - BJ - FCF50 - PU
SMART Plungers SP-FCF Series Features Always return back to original position (wide angle 42 ) No need tool for pad replacement Less friction for Level compensator Light weight and long life time Compact
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
HabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
Roller chains H-Series American type. High Performance from Rexnord. The right chain!
High Performance from Rexnord Roller chains H-Series American type Highly robust & durable through reinforced plates H-Series - American type High Performance from Rexnord. Inner Reinforced, fatigue resistant
METRIC BALL SCREW JACKS
METRIC BA METRIC BA With over twenty-five years of experience manufacturing precision worm gear screw jacks, Nook Industries has expanded the ActionJac offering to include metric models providing design
Offset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
Conveyor chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Conveyor chains American type Conveyor chains - American type Approved Performance from Rexnord. Fulfils ANSI quality requirements Inner link Carbon steel Roller Carbon
The right chain! Approved Performance from Rexnord. Double pitch roller chains. MODULE_05/GB/2014/08 // No liability accepted for misprints or errors!
Approved Performance from Rexnord Double pitch roller chains Double pitch roller chains Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered
MW50 HYDRAULIC MOTORS
MW50 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G CHARACTERISTICS Motor inertia 1 kg.m² H D S M W 5 0 1 2 3 4 1 2 3 4 1 2 3 3 4 1 2 3 4 5 cm³/tr [cu.in/rev.] Theoretical torque at 100 bar at 1000 SI
Page 1 - Gearbox & Bearing Housing. Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2)
Spare Parts List Hy~Line Contents Page 1 - Gearbox & Bearing Housing Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2) Page 4 - Ports Page 5 - Single Mechanical
Components for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling
Engineered Materia Handing Components for Overhead Cranes Sta dard n Hoists Engineered Hoists Endtrucks Crane Kits Troey drive consists of singe speed squirre-cage gear motors. Integra disc brakes are
Mini-V Precise Turning, Grooving, Threading & Face Grooving
INERNAL MACHINING Mini-V Pecise uning, Gooving, heaing & ace Gooving MERIC Innovative Gooving & uning Solutions Mini-V Mini ools fo Small & Meium Boes he Mini-V line by Goovex offes impove solutions fo
American Standard (ANSI) Roller Chain
American Standard () Roller (All dimensions in inches) Single Roller ISO itch p Between lates Roller Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer.
The right chain! Approved Performance from Rexnord. Conveyor chains W-Series. MODULE_11/GB/2014/02 // No liability accepted for misprints or errors!
pproved Performance from Rexnord Conveyor chains W-Series Conveyor chains - W-Series pproved Performance from Rexnord. Fulfils NSI quality requirements Link plate Carbon steel Pin Carbon steel, press fit
The right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard
Conveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
Roller chains European type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains European type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
Roller chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains American type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
Hard metals for precision tools
had mateial mattes Had metals fo pecision tools CERATIZIT - the paent companies Headquates and paent company in MAMER / Luxemboug Paent company in REUTTE / Austia iect sales and distibution patnes 2 Ou
uni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
LUBRICANTS CHAIN OILS YOUR ADVANTAGE IN AN INDUSTRIAL WORLD
LUBRICANTS CHAIN OILS YOUR ADVANTAGE IN AN INDUSTRIAL WORLD THE EXPERTS IN CHAIN OIL TECHNOLOGY CASTROL OFFERS YOU A COMPLETE RANGE OF WORLD-CLASS CHAIN LUBRICANTS AND PRODUCT SUPPORT SERVICES DESIGNED
Our policy is one of continuous research and development. We therefore reserve the right
Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can
+91-8048762018 Spectra Plast India Private Limited http://www.systemplaast.com/ Spectra Plast India Pvt. Ltd. is a renowned manufacturer and exporter of a comprehensive range of conveyor components and
Wrenches. Combination Wrench
Combination Wrench Open End Wrench Offset Rin Wrench Star Box End Wrench Flare Nut Wrench Flexible Crow Foot & Rin Socket Wrench Swivel Head Socket Wrench Sluin Wrench Heavy Duty Wrench Speed Wrench Anled
GEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM
Dispacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 PM GEA MOTOS JM Gear Motor Cataogue JM TABE OF CONTENTS DESCIPTION......................................................................................................................
Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
Magnetic-inductive flow measurement device Type VOLUMTEC - best performance
Version examples: VOUMTEC in compact version with process connection adapter, welding adapter for pipes according to DIN 11850 and VOUMTEC in separate version without process connection adapter CHARACTERISTICS
EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2
Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................
ITM HSS GROUND THREAD HAND TAPS - MACHINE SCREW
TAPER 8 to 10 threads chamfered for easy thread starting in tough materia. PLUG BOTTOMING 3 to 5 threads chamfered for genera use when tapping to bottom of hoe is not critica. This is the most popuar tap
Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1
Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................
Multi-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
Cam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
The right chain! Extreme Performance from Rexnord. Leaf chains RexAthletic. MODULE_08/GB/2014/08 // No liability accepted for misprints or errors!
Extreme Performance from Rexnord Leaf chains RexAthletic RexAthletic Extreme Performance from Rexnord. Good corrosion protection, maximum operating reliability Intermediate plate Pin hardened and tempered,
Code no. 61 STAINLESS STEEL 316 HINGES
Code no. 61-003 Stainless steel pin diameter 7 mm. With stainless steel washers and 6 countersunk holes for M5 screws. L 76 x 76 x 2.5 mm, pin dia = 7 mm R/H Stainless steel pin diameter 7 mm. With stainless
Materials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
WIRTGEN GROUP ORIGINAL SPARE PARTS
CLOSE TO OUR CUSTOMERS WIRTGEN GROUP ORIGINAL SPARE PARTS Special campaign 2017 / 2018 CAMPAIGN PERIOD 01/11/2017 until 31/03/2018 WIRTGEN GROUP I PARTS SPECIAL CAMPAIGN ORIGINAL WIRTGEN GROUP PARTS SPECIAL
P0440. Plastic Head Knurled Thumb Screws. Screws d 4 d 1 d 2. d 3. h 2 h 1. l 1
Thumb Pastic Head Knured Thumb 0.5 2 d 4 P0440 1 Thermopastic (PA), back knob. Thread stainess stee (A2) or stee (zinc-pated). Technica Notes Temperature resistant from -30 C to +80 C. Order No. 1 d 4
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids,
*the installation defects and wear defects are not covered by the guarantee
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
Clean Line Stainless steel
www.puzzleadvance.com Clean Line Stainless steel operating parts lock systems hinges profile rubber linear systems anti-fadigue mats clamping technology standard elements operating magnets Clean Line With
300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
CORE. Sliding technology
CORE Sliding technology CORE linear sliding bearings 40 years of experience in sliding technology. Advantages of CORE bearings: Low friction coefficient. Bi-directional displacements allowed. Maintenance
Shaft Clamping Elements 8
Clamping Elements 8 BACK NEXT The Company Cross & orse was established in 14 through the amalgamation of two long standing and well respected companies in the Power Transmission Industry, T.D. Cross and
Interact Overhead Power
Interact Overhead Power 75 range introduction feature benefits Interact Overhead Power System is a powertrack catering for singe, 3 phase or dua circuit appications suitabe for standard, permanent ive,
CONTENTS. General information Ordering example: Guide pillar Guide bush Ball bearing cage Strokes 32.
CONTENTS Pages General information.02 Ordering example:.04 Guide pillar.05 Guide bush.06 CA EB BA HB JB NB GB Ball bearing cage.07 PA Strokes.08 Clamp positions.09 Demountable pillar.10 EPO Middle pillar.11
Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2
Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping
Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409
SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409 SNAP-TOP STANDOFFS PEM SNAP-TOP Standoffs (s SSA, SSS, SSC, KSSB) are designed for permanent installation into metal panels or PC boards. These all-metal
Peeled and Ground Round Steel Bars
pag. 1 of 9 Viale Certosa, 249-20151 Milano Tel: +39 02 30 700 - Fax: +39 02 38000 346 - Mail: commerciale.riva@rivagroup.com Production Units: Malegno (BS), Italy pag. 2 of 9 Products STRUCTURAL AND GENERAL
Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2
Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal
TWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
uni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
Download the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
Eaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping