Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
|
|
- Daniella Bennett
- 5 years ago
- Views:
Transcription
1 lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening: 47%/55% Backflex radius: 25.0 mm (0.98 in) in diameter: 5.0 mm (0.20 in) Min. inside radius: 1.6 x belt width. 2.3 x belt width uni Flex SNB 2.3 Surface Opening: 55% uni Flex SNB W 2.3 Surface Opening: 55% (Nominal) mm in mm in A A ICH 25.4 MM/1.00 IN SIDE FEXING SANDAD uni Flex SNB WO 2.3 Surface Opening: 55%
2 uni Flex SNB C ubber op 1.6 uni Flex SNB CI ubber op 2.3 mm in mm in (Nominal) uni Flex SNB C ubber op 2.3 Indent uni Flex SNB C ubber op 1.6 is 26.5 mm (1.04 in). uni Flex SNB CI ubber op 2.3 is 7.0 mm (0.28 in). uni Flex SNB C ubber op 2.3 is available without indent. ype Belt materials and colors in materials and colors uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB 2.3* OM-D B W B W A6.6 B W B G uni Flex SNB W uni Flex SNB WO A6.6 B W SS304 uni Flex SNB W A6.6 B W SS304 B G uni Flex SNB C ubber op 1.6 uni Flex SNB CI ubber op 2.3 uni Flex SNB C ubber op 2.3 B + 03 K W + 03 N B G Standard materials and colors ockingplates W B Wearpart and O-ab A6.6 W B For high speed or load abrasive applications: Wearpart and O-ab OM-DK Y Non standard material and color: See uni Material and Color Overview. Alternative pin materials: A6.6 B N
3 uni Flex SNB C 1.6 ermissible tensile force OM-D/B /B A6.6/B OM-D /B /B Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in). Flex SNB-C locked with wearpart or O-tabs both sides are 6 mm wider than the dimensions in the table above. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf). 850 N (191 lbf). A N (225 lbf). **Max. Spacing between wear strips. Carry: mm (6.00 in); eturn: mm (12.00 in). A6.6/B sprocket per shaft **Carry **eturn (pcs) (pcs) uni Flex SNB C 2.3 / uni Flex SNB 2.3 ermissible tensile force OM-D/B /B A6.6/B /B Flex SNB- locked with wearpart or O-tabs both sides are 6 mm wider than the dimensions in the table above. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf). 850 N (191 lbf). A N (225 lbf) **Max. Spacing between wear strips. Carry: mm (6.00 in); eturn: mm (12.00 in) A6.6/B sprocket per shaft **Carry **eturn (pcs) (pcs) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in)
4 uni Flex SNB W 2.3 / uni Flex SNB WO 2.3 OM-D/SS+ ermissible tensile force /SS+ A6.6/SS+ OM-D/SS+ /SS+ Outer modules are always in A6.6 on belts wider than mm (9.21 in). Belts up to mm (9.21 in) in width is only available in A6.6. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf). 850 N (191 lbf). A N (225 lbf). **Max. Spacing between wear strips. Carry: mm (6.00 in); eturn: mm (12.00 in). Outer modules are always in A6.6 on belts wider than mm (9.21 in). Belts up to mm (9.21 in) in width is only available in A6.6. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf). 850 N (191 lbf). A N (225 lbf). **Max. Spacing between wear strips. Carry: mm (6.00 in); eturn: mm (12.00 in). A6.6/SS+ sprocket per shaft **Carry **eturn (pcs) (pcs) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) uni Flex SNB W 2.3 B pins ermissible tensile force OM-D/B /B A6.6/B OM-D/B /B A6.6/B sprocket **Carry per shaft (pcs) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) **eturn (pcs)
5 uni Flex SNB W 2.3 SS pins OM-D/SS + ermissible tensile force /SS + A6.6/SS + OM-D/SS+ /SS+ Outer modules are always in A6.6 on belts wider than mm (9.21 in). Belts up to mm (9.21 in) in width is only available in A6.6. *Max. oad per Drive Sprocket. Belt material: OM-D 1000 N (225 lbf). 850 N (191 lbf). A N (225 lbf). **Max. Spacing between wear strips. Carry: mm (6 in); eturn: mm (12 in). A6.6/SS+ sprocket per shaft **Carry **eturn (pcs) (pcs) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in) Additional standard belt widths are available in steps of 76.0 mm (2.99 in) Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in)
6 Belt racking og Control Systems (W) Basic belt types can be combined with the belt tracking and control systems below to enhance performance. Basic belt types can be combined with the belt tracking and control systems below to enhance performance. uni Flex SNB 2.3 Standard (W) W - 6 mm (0.24 in) Wearpart system made of heat and wear resistant nylon to reduce the friction between belt edge and wearstrip. Only this part needs to be replaced when it has been worn out. not the entire belt. Wearpart W + 12 mm (0.47 in) (W) W - 6 mm (0.24 in) Outer edge tab system made of heat and wear resis tant nylon to reduce the friction between belt edge and wear strip. Using a slotted wear-strip. the O-ab will track the belt and allow the conveyed products to be wider than the belt. Height of O-ab: 6.4 mm (0.25 in) Height of slot: 8.0 mm (0.31 in) O-ab Intermediate tabs (I-ab) are placed on the bottom side of the belt to hold it down on incline conveyors. he intermediate tabs will fit anywhere across the belt bottom and at pitch multiples of 12.7 mm (0.50 in). I-ab (W) W - 68 mm (2.68 in) Side tab (S-ab) for holding the belt down. Normally used for wide belts. With S-abs. Ammerral Beltech modular A/S recommend that the radial forces in the curve are transferred by the inside edge of the belt similar to uni Flex SNB and uni Flex SNB W. link = 34.0 mm (1.34 in). S-ab ype Belt tracking and control combination Wearpart O-ab S-ab I-ab When using S-abs. please verify sufficient clearance to the shaft. Max. shaft diameter = Sprocket pitch diameter mm (2.00 in). uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C uni Flex SNB W uni Flex SNB W uni Flex SNB WO When using square shafts. please verify that the diagonal does not exceed max. diameter. Example: Sprocket z = 10: Max. shaft diameter = ø31 mm ( = ø1.2 in). - Standard Unavailable + Optional
7 Accessories Click on Flight 50.8 mm (2.00 in) Click on Flight 25.4 mm (1.00 in) ubber Support: Made-o-Order Click on Flight ow: Made-o-Order ubber op Side Guard Accessories Side Guard / Standard ype Belt material & color mm Height in Side Guard -I B W Accessories Flight / Standard ype Belt material & color ink size Height Width mm in mm in Click on Flight Flat A6.6 B W K300 B W Support / MO ype Support material & color H Width ength mm in mm in mm in ubber Support 01 N Click on Flight ow OM-D N Accessories Minimum Indents (I) ype ubber op Side Guard Click on Flights without Side Guard Click on Flights with Side Guard eft ight eft ight eft ight eft ight mm in mm in mm in mm in mm in mm in mm in mm in uni Flex SNB C uni Flex SNB uni Flex SNB C uni Flex SNB W uni Flex SNB WO uni Flex SNB W 2.3* uni Flex SNB W 2.3** * Even distance between Click on Flight rows ** Odd distance between Click on Flight rows
8 Made-o-Order Selection A B C uni Flex SNB with ollers ø17 x 5.5 mm (ø0.67 x 0.22 in) ype lastic Sprocket oller material & color OM-D W Made-o-Oder Materials: OM-D.. A6.6 and oller Material OM-D. Non standard oller material and color: See uni Material and Color verview. A B C mm in mm in mm in No. of teeth ilot Bore in mm Bore size Overall diameter itch diameter Hub diameter Dimension A Dimension B mm in mm in mm in mm in mm in Single row/wo way Double row/wo way Molded A6 G Machined A6 N Z09 x x x Z10 x x x Z12 x x x Z15 x x x Z18 x x x Z19 x x x Molded sprocket Molded sprocket B Non standard material and color: See uni Material and Color Overview. A Other sprocket sizes are available upon request. wo-part sprocket are available upon request. Other bore sizes are available upon request. uni etainer ings: See uni etainer ing data sheet. Width of tooth = 4.0 mm (0.16 in). Width of sprocket = 25.0 mm (0.98 in). Max. load per sprocket shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni Assembly Instructions for uni Flex ASB. For more detailed sprocket information. contact Customer Service. uni Flex SNB/ Conveyor Belts Seamless Belts Modular Belts iming Belts Expert advice, quality solutions and local service for all your belting needs his information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. his information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. ransmission Belts Fabrication & service Ammeraal Beltech Modular A/S Hjulmagervej 21 DK-7100 Vejle F admin@unichains.com
Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative
More informationuni CSB The versatile plastic modular belt for the Automotive Industry
uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is
More informationPOM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationT L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationP (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE
Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationPOM-SFL/PP POM-EC/PP
elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6
More informationBottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material
More informationP (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL
More informationuni MPB Straight running
87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationuni MPB Straight running
88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More informationT L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More informationThe uni SNB M2 belt increases performance in the following industries/applications:
uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationuni-chains Belt Systems
unichains Belt Systems Guarantee unichains guarantees for one year against defects caused by faults in design, production or material. 2002, unichains A/S. Copying or reproduction of this catalogue is
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationOffset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationAdvised minimum width SLIDING ROLLERS SERIES 20
Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES
More informationMulti-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
More informationAmerican Standard (ANSI) Roller Chain
American Standard () Roller (All dimensions in inches) Single Roller ISO itch p Between lates Roller Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer.
More informationCOMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...
COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading
More information7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationOmni-Pro 075. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and
More informationBelts for the Confectionery Industry. Your business is our business!
NA Your business is our business! Belts for the Confectionery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery www.ammeraalbeltech.com We know your production
More information300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International
More informationFree Flow Chain. Free Flow Chain. Top Roller Chain. 2.5x Speed. Low Noise
Double itch Free Flow Chain Free Flow Conveyor his is a conveyor system where the speed of conveyed objects can be freely controlled and stopped at any time and at any position for accumulation or for
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationSeries R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]
Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationSTRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55
STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN OMNI-GRID & OMNI-LITE Turn Curve belting
More informationSTRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/
STAIHT UNNIN STEE CHAINS Series 812/815-812/815 800/802/805-8157 - 515 16 19 SIDEFEXIN STEE CHAINS Series 881-881O - 881 TAB - 881O TAB 881M - 881 MO - 881 MO - 8857M 8857 TAB - 1874 20 24 A OU STEE CHAINS
More informationOmni-Pro 120. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 120 USA and
More information3.25, 4.5, 7.5 Tabletop Conveyor Specifications
3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder
More informationMartin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
More informationSeries SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationBelt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
More informationStandard Metric Roller Chain (DIN 8180/8187 and BS 228)
Standard Metric Roller (DIN 10/17 and BS 22) Single Roller Size ISO itch p Between Inner lates b 1 2. 2.0.00. 2. 4. 6. 6. 9. 11.6 19.56 0.99.99. 4 Roller d 1. 4.00 5.00 6..51 7.77.16.07 15. 0 27.94 29.21
More informationC O N V E Y O R B E L T S
CONVEYOR BELTS GENERAL INDEX INFO....................................................... 3-9 Why Eurobelt Product Range Materials INFO SERIES 20.................................................. 10-23
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationCONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP
CONVEYOR INSTALLATION MANUAL I VERSION 1 Rexnord TableTop and MatTop Chains Rexnord Roller Upgrade System REXNORD FLATTOP Rexnord Industries, LLC For more than one hundred years, Rexnord has provided superior
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationSuper-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
More informationNew Standard Power Transmission
ew Standard ower ransmission lame ut Sprockets S has series of engineered conveying sprockets and matching conveying chains of different varieties. We manufacture engineered sprockets with and without
More informationSpare Parts Manual. MaxiSpan - MultiSpan - MonoSpan - MiniLink. Stainless Steel, Painted, & Aluminum Conveyors. presents. for
presents Spare Parts Manual for MaxiSpan - MultiSpan - MonoSpan - MiniLink Stainless Steel, Painted, & Aluminum Conveyors 2008 SpanTech GUARANTEE OF QUALITY SpanTech LLC has carefully designed, manufactured,
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationP R O D U C T T E C H N I C A L B U L L E T I N SUPER SMALL RADIUS OMNI-GRID. Turn Radius = 0.8 x (the Belt Width) (Patent Pending)
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N TABLE OF CONTENTS
More informationPROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
More informationApron Feeders. TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty
Apron Feeders TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty Apron Feeders Terex Jaques Apron Feeders use heavy-duty
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More informationMay 2011 English Version Issue 3.6
E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationTHE MOST ADAPTABLE BELT FOR SPIRAL CAGE SYSTEMS UP TO 300 LBS. CAM-GRID EXTRA UP TO 250 LBS. CAM-GRID
CAM-GRID THE MOST ADAPTABLE BELT FOR SPIRAL CAGE SYSTEMS SUPERIOR STRENGTH STRAIGHT & SPIRAL APPLICATIONS EASY TO CLEAN Cam-Grid belts are our most application-adaptable product for spiral systems. MAX.
More informationYour business is our business!
EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing
More informationTo contents. STEP-files S620 S
STEP-files S620 S620 www.carryline.com 2 Technical specifica on S620 Width of chain Chain pitch Width conveyor profile Height conveyor Radius conveyor chain on the drive and idler unit Max. permi ed trac
More informationSTRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP
SIGH UNNING CHINS with low noise accumulation rollers Series BP 821 - BP 8257 - BP 831 46 48 SIDFXING CHINS with low noise accumulation rollers Series BP 878 B - BP 879 M BP 882 B - BP 882 M 49 52 PPICION:
More informationFood Grade Positive Drive Line
Food Grade Positive Drive Line The Next Step in Belting SuperDrive The homogeneous PositiveDrive belt, recognized worldwide as the best choice where hygiene and conveying efficiency are essential. The
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More informationMay 2009 English Version Issue 3.0
S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information
More informationELATECH flat belts. Pulleys. Belt storage. TP (Total Protection) Belts. Belt installation. Belt life. Belt fastening guidelines F1 F2 F2,5 F3
ELATECH flat belts Pulleys Belt storage Belt installation TP (Total Protection) Belts Belt life Belt fastening guidelines F1 F2 F2,5 F3 a b p s d Bolt R (Radius) F1 F2 F2,5 F3 D F1 1 ELATECH M and V Type
More informationMagnetic Particle Brakes and Clutches
Magnetic Particle Brakes and Clutches Accurate torque control with instantaneous engagement! Available in a wide range of models and sizes Warner Electric s magnetic particle brakes and clutches are quiet
More informationRex 1701 Multiflex Chain
1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate
More information