Ammeraal Beltech Modular

Size: px
Start display at page:

Download "Ammeraal Beltech Modular"

Transcription

1 mmeraal eltech Modular Innovative belt and chain solutions for every industry & application

2 ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page -

3 Datasheet: uni QN EN Plastic Modular elt Series uni QN Running direction elt material & color POM-SLF PP PP Pin material & color W PP PP W P P (Nominal) L T Straight running belt Nominal pitch: 5.4 mm (.00 in) Surface type: Flat Surface opening: losed ackflex radius: 40.0 mm (.57 in) Pin : 5.0 mm (0.9 in) mm in mm in L T Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials: Solid Lockpin: P6.6 D Pin: PP W P6.6 PE W PT LG and SS304 Endlock: P6.6 D Lockpin: PT LG P6.6 D N PP W elt width Permissible tensile force (elt/pin material) elt weight (elt/pin material) POM-SLF/PP PP/PP POM-SLF/PP PP/PP mm in N lbf N lbf kg/m lb/ft kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **arry (pcs) **Return (pcs) PITH 5.4 MM/.00 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in) dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in) General belt tolerance is +0/-0.4% at 3 /73 F and 50% RH. For exact belt width contact ustomer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-SLF 300 N (57 lbf), PP 300 N (9 lbf). **Max. Spacing between wear strips, arry: 5 mm (6 in); Return: 304 mm ( in). = Single Link 3

4 Datasheet: uni QN ccessories Rubber Top urved Rib urved Rib Flat Rib Flat Rib elt Rubber Link Width mm in mm in mm in size mm in urved Rib Flat Rib PP 03 K K K K K Non Standard material and color: See uni Material and olor Overview. ccessories Flight H Non Stick Flight PP-I W POM-SLF H Width Indent Link size mm in mm in mm in K Non Standard material and color: See uni Material and olor Overview. 4

5 Datasheet: uni QN ccessories NON STNDRD Tab Single Link Only K50 D K00 E F Recommended link material & color Recommended pin material & color D E F mm in mm in mm in mm in mm in mm in Link Size ottom Guide POM-SLF PP P6.6 D K50 K00 Solid Lockpin as default lock system. lternative pin materials & color: PT LG Non Standard material and color: See uni Material and olor Overview. ccessories mflight Running direction H H H H H H mm in mm in mm in Push PE W Other Non Standard option: See uni mflight Overview. W (elt width) mm in min Running direction min PI max W W - 4. PI PI min Increment:.7 mm (0.50 in) 5

6 Datasheet: uni QN Sprocket No. of teeth Pilot bore in mm ore size Overall Pitch Hub Dimension Dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z0 x x x Z x x x Z5 x x x Z8 x x x Z9 x x x Moulded sprocket Moulded sprocket Moulded sprocket Non standard material and color: See uni Material and olor Overview. Same sprocket type as for the uni QN serie. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 0.0 mm (0.39 in) Width of sprocket = 5.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni QN. For more detailed sprocket information. contact ustomer Service. uni QN /60 onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej DK-700 Vejle T F admin@unichains.com 6

7 Datasheet: uni QN Rough EN Plastic Modular elt Series uni QN Rough elt material & color Running direction POM-SLF Pin material & color PP elt width Permissible tensile force (elt/pin material) POM-SLF/PP F P P (Nominal) L T Straight running belt Nominal pitch: 5.4 mm (.00 in) Surface type: Rough Top Surface opening: losed ackflex radius: 40.0 mm (.57 in) Pin : 5.0 mm (0.3 in) mm in mm in L F T Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials: Solid Lockpin: P6.6 D Pin: PP W P6.6 PE W PT LG and SS304 Endlock: P6.6 D Lockpin: PT LG P6.6 D N PP W elt weight (elt/pin material) POM-SLF/PP mm in N lbf kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **arry (pcs) **Return (pcs) PITH 5.4 MM/.00 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in) dditional standard belt widths are available in steps of 76.3 mm (3.00 in). dditional non-standard belt widths are available in steps of 5.4 mm (.00 in) General belt tolerance is +0/-0.4% at 3 /73 F and 50% RH. For exact belt width contact ustomer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-SLF 300 N (57 lbf), PP 300 N (9 lbf). **Max. Spacing between wear strips, arry: 5 mm (6 in); Return: 304 mm ( in). = Single Link 7

8 Datasheet: uni QN Rough ccessories Rubber Top urved Rib urved Rib Flat Rib Flat Rib elt Rubber Link Width mm in mm in mm in size mm in urved Rib Flat Rib PP 03 K K K K K Non Standard material and color: See uni Material and olor Overview. ccessories Flight H Non Stick Flight PP-I W POM-SLF H Width Indent Link size mm in mm in mm in K Non Standard material and color: See uni Material and olor Overview. ccessories Non Standard uni mflight Running direction Principle sketch Other Non Standard option: See uni mflight Overview. 8

9 Datasheet: uni QN Rough Sprocket No. of teeth Pilot bore in mm ore size Overall Pitch Hub Dimension Dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z0 x x x Z x x x Z5 x x x Z8 x x x Z9 x x x Moulded sprocket Moulded sprocket Moulded sprocket Non standard material and color: See uni Material and olor Overview. Same sprocket type as for the uni QN serie. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 0.0 mm (0.39 in) Width of sprocket = 5.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni QN. For more detailed sprocket information. contact ustomer Service. 9

10 Datasheet: uni QN Rough uni QN Rough/606 onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej DK-700 Vejle T F admin@unichains.com 0

11 Datasheet: uni QN all EN Plastic Modular elt Series uni QN all Running direction R R P T L Straight running belt Nominal pitch: 5.4 mm (.00 in) Surface type: all Surface opening: losed ackflex radius: 5.0 mm (0.98 in) Pin : 5.0 mm (0.0 in) STNDRD elt material & color POM-SLF mm in mm in all material & color P6.6 N P (Nominal) R Pin material & color PP Non standard material and color: See uni Material and olor Overview. Permissible tensile force (elt/pin material) L T elt weight (elt/pin material) elt width * Min No drive sprocket POM-SLF/PP POM-SLF/PP ** per shaft arry (pcs) mm in N lbf Kg/m Ib/ft Number of wear strips (min no) ** Return (pcs) PITH 5.4 MM/.00 IN STRIGHT RUNNING dditional standard belt widths are available in steps of 76.3 mm (3.00 in) dditional standard belt widths are available in steps of 76.3 mm (3.00 in) General belt tolerance is +0/-0.4% at 3 /73 F and 50% RH. For exact belt width contact ustomer Service. *Max. Load per Drive Sprocket. elt material: POM-SLF 840 N (44 lbf) **Max. Spacing between wear strips, arry: 5 mm (6 in); Return: 304 mm ( in). = Single Link

12 Datasheet: uni QN all Sprocket No. of teeth Pilot bore in mm ore size uni QN all/ Overall Pitch Hub Dimension Dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z5 x x x Z8 x x x Z9 x x x Machined sprocket Non standard material and color: See uni Material and olor Overview. Other sprocket sizes are available upon request. Two-part sprockets are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 8.0 mm (0.3 in) Width of sprocket = 5.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni QN all. For more detailed sprocket information. contact ustomer Service. onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej DK-700 Vejle T F admin@unichains.com

13 Date: onveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service Global Headquarters: mmeraal eltech Holding.V. P.O. ox 38, 700 Heerhugowaard The Netherlands T F info@ammeraalbeltech.com

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM

More information

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni

More information

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6 Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular

More information

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color

More information

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA

POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex

More information

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.

More information

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL

More information

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE

POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:

More information

P (Nominal) L T mm in N lbf kg/m lb/ft

P (Nominal) L T mm in N lbf kg/m lb/ft Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and

More information

(Nominal) L Belt weight (Belt/pin material)

(Nominal) L Belt weight (Belt/pin material) N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal

More information

P (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft

P (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:

More information

(Nominal) Belt weight (Belt/pin material)

(Nominal) Belt weight (Belt/pin material) Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6

More information

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6. Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt

More information

uni CSB The versatile plastic modular belt for the Automotive Industry

uni CSB The versatile plastic modular belt for the Automotive Industry uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is

More information

P (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE

P (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:

More information

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in

T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running

More information

T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile

More information

POM-SFL/PP POM-EC/PP

POM-SFL/PP POM-EC/PP elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material

More information

Ammeraal Beltech Modular

Ammeraal Beltech Modular Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates

More information

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt

More information

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series

Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

uni Flex L-ASB Sideflexing

uni Flex L-ASB Sideflexing uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version

More information

The uni SNB M2 belt increases performance in the following industries/applications:

The uni SNB M2 belt increases performance in the following industries/applications: uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface

More information

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series

Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:

More information

uni MPB Straight running

uni MPB Straight running 88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt

More information

uni MPB Straight running

uni MPB Straight running 87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt

More information

uni Flex SNB Sideflexing

uni Flex SNB Sideflexing uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has

More information

Download the most up-to-date version at KleanTop Belt Product Catalog

Download the most up-to-date version at   KleanTop Belt Product Catalog Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date

More information

NEW. Modular Belt selection. > uni Flex L-ASB > uni Flex L-ASB T > uni Flex L-ASB R. The brand for plastic modular belts and chains

NEW. Modular Belt selection. > uni Flex L-ASB > uni Flex L-ASB T > uni Flex L-ASB R. The brand for plastic modular belts and chains UK EW Modular elt selection > uni Flex L-S > uni Flex L-S T > uni Flex L-S R The brand for plastic modular belts and chains uni Flex L-S Pitch 5.8 mm (2. in.) uni Flex L-S This new generation of 2 in.

More information

Rexnord 1757 TAB TableTop Chain

Rexnord 1757 TAB TableTop Chain 1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width

More information

COMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...

COMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation... COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading

More information

FMB-DDSP Belt for High Load and Low Load Pulleys

FMB-DDSP Belt for High Load and Low Load Pulleys FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30

More information

P R O D U C T T E C H N I C A L B U L L E T I N

P R O D U C T T E C H N I C A L B U L L E T I N ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT

More information

Complementary accessories

Complementary accessories Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010

More information

PROLINK ENGINEERING MANUAL

PROLINK ENGINEERING MANUAL EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,

More information

HabaCHAIN Slat and Conveyor Chains

HabaCHAIN Slat and Conveyor Chains Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended

More information

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive

More information

Energy Chain Systems E2 medium

Energy Chain Systems E2 medium Energy Chain Systems E2 medium E2 medium Series // Series 26/27/27i Series 340/350* *Extender chain 2 parts per link, maximum Easy installation Many connection options Long service life High stability

More information

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive

More information

MATERIAL HANDLING SYSTEMS

MATERIAL HANDLING SYSTEMS MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030

More information

Taper Bore Sprockets. Sprockets. 06B 3/8" x 7/32" BS Taper Bore Sprockets. c r 3. SPROCKET mm CHAIN mm Tooth Radius r 3

Taper Bore Sprockets. Sprockets. 06B 3/8 x 7/32 BS Taper Bore Sprockets. c r 3. SPROCKET mm CHAIN mm Tooth Radius r 3 Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 06B 3/8" x 7/32" SPROCKET mm CHIN mm Tooth Radius 10.0 Pith 9.525 Chamfer 1.0 Width Between Inner Plates 5.720 Tooth Width b1 5.2 Roller Diameter 6.350

More information

Rexnord 880 TAB TableTop Chain

Rexnord 880 TAB TableTop Chain 880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6

More information

Timing Belts Our product range

Timing Belts Our product range GB Timing Belts Our product range» Standard program» Production engineering» Joint techniques» Cleats» V-guides» Special surface coating» Sprockets» Tools 02 03 Bode Belting More than 30 years experience

More information

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0. EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49

More information

1000-SERIES MODULAR BELTS

1000-SERIES MODULAR BELTS 1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low

More information

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N] Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5

More information

Omni-Pro 075. USA and International Patents Pending

Omni-Pro 075. USA and International Patents Pending ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and

More information

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications

More information

Agricultural Chain ISO 487/DIN 8189 and Works Standard

Agricultural Chain ISO 487/DIN 8189 and Works Standard ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia

More information

FLEXBELTS BENEFITS PROGRAMME AND...

FLEXBELTS BENEFITS PROGRAMME AND... FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch

More information

P R O D U C T T E C H N I C A L B U L L E T I N

P R O D U C T T E C H N I C A L B U L L E T I N ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International

More information

Rexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain

Rexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop

More information

Omni-Pro 120. USA and International Patents Pending

Omni-Pro 120. USA and International Patents Pending ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 120 USA and

More information

Belts for the Confectionery Industry. Your business is our business!

Belts for the Confectionery Industry. Your business is our business! NA Your business is our business! Belts for the Confectionery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery www.ammeraalbeltech.com We know your production

More information

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International

More information

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.

EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0. EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511

More information

300mm Conveyor System

300mm Conveyor System 300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width

More information

MicroSpan. Chain. Chain. revised SpanTech LLC

MicroSpan. Chain. Chain. revised SpanTech LLC Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...

More information

ENGINEERING CHAIN DIVISION

ENGINEERING CHAIN DIVISION Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick.

More information

Torque Limiter Design Features

Torque Limiter Design Features In response to industry needs, Morse introduced the first spring loaded, friction type protective device in 1949, called the Morse torque limiter. s the originator of the torque limiter, Morse has gained

More information

FLEXBELTS BENEFITS PROGRAMME AND...

FLEXBELTS BENEFITS PROGRAMME AND... FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch

More information

Underground Conveyor Structure CEMA C, D, and E Series

Underground Conveyor Structure CEMA C, D, and E Series Underground onveyor Structure EM, D, and E Series ustom Designed Solutions for Your Mining pplications ontents elt Structure onfigurations...4 arrying ssemblies...5 Offset arrying ssemblies...6 arrying

More information

PLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2

PLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2 Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5

More information

NEW. Plastic Modular Belt Series > uni RTB M1 > uni RTB M2

NEW. Plastic Modular Belt Series > uni RTB M1 > uni RTB M2 UK NEW Plastic Modular Belt Series > > uni RTB 2 Pitch 50.8 (2.00 in.) uni RTB - State of The Art in Roller Top Modular Belts The new uni RTB belt is the most flexible and reliable handling solution for

More information

CHAIN ENDS acc. DIN 764 / 766 Dimensions

CHAIN ENDS acc. DIN 764 / 766 Dimensions CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b

More information

Advised minimum width SLIDING ROLLERS SERIES 20

Advised minimum width SLIDING ROLLERS SERIES 20 Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES

More information

Soliflex PRO & Soliflex PRO mini

Soliflex PRO & Soliflex PRO mini EN Introducing the Soliflex PRO mini Soliflex PRO & Soliflex PRO mini NEW The Ultimate Hygienic Belt A Win-Win for the Food Industry: Ultimate hygiene and lower total cost of ownership With over 65 years

More information

Rex 1701 Multiflex Chain

Rex 1701 Multiflex Chain 1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate

More information

ATC / ATB Series AT Clutches and Brakes

ATC / ATB Series AT Clutches and Brakes ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex

More information

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:

CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX: Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available

More information

ROUND LINK CHAIN DRIVE SYSTEM

ROUND LINK CHAIN DRIVE SYSTEM 524 0508 274 366 customerservices@bridoncookes.co.nz Round Link Chain Drive Systems.... 526 Introduction.... 526 Solutions to Old Problems.... 527 Applications.... 528 Tecdos Omega Drive.... 529 Pocket

More information

Tooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P

Tooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication

More information

Drop Forged Chain For Conveyors & Elevators

Drop Forged Chain For Conveyors & Elevators Drop Forged Chain For Conveyors & Elevators Quality Components for Chain Conveyors & Elevators Introduction Members of the Schenck Process Group, Stock Redler Ltd are leading providers of feeding, automation

More information

Your business is our business!

Your business is our business! GB Your business is our business! Belts for the Wood Industry Ammeraal Beltech:» knows your process» for all your belting needs» just-in-time delivery www.ammeraalbeltech.com Knowing your production process

More information

Dupont Vespel CR-6100

Dupont Vespel CR-6100 oulden Installation Guide for Dupont Vespel CR-6100 DuPont Vespel CR-6100 is a composite material of Teflon PF and long carbon fibers. It is used for stationary wear components or inserts in centrifugal

More information

CHAINS & BELTS PRODUCTION PROGRAM

CHAINS & BELTS PRODUCTION PROGRAM CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric

More information

Your business is our business!

Your business is our business! EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing

More information

The right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!

The right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors! High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard

More information

SAFEMAX zero backlash Torque Limiters SAFEMAX

SAFEMAX zero backlash Torque Limiters SAFEMAX SFEMX zero backlash imiters SFEMX ontents SFEMX zero backlash imiters Page Description 71 haracteristics 72 abel code 72 SFEMX Zero acklash imiters SIT GS/SG/N 73 SFEMX Zero acklash imiters SIT GS/SG/N

More information

Engine Driven Products

Engine Driven Products Engine riven Products ore Values 1. We respect each other, our community and the environment. 2. We are ethical and honest in all of our business dealings. 3. We are diligent in protecting the safety of

More information

Rex 880 TableTop Chain Side-flexing

Rex 880 TableTop Chain Side-flexing Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal

More information

3.25, 4.5, 7.5 Tabletop Conveyor Specifications

3.25, 4.5, 7.5 Tabletop Conveyor Specifications 3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder

More information

Food Grade Positive Drive Line

Food Grade Positive Drive Line Food Grade Positive Drive Line The Next Step in Belting SuperDrive The homogeneous PositiveDrive belt, recognized worldwide as the best choice where hygiene and conveying efficiency are essential. The

More information

CHIARAVALLI Trasmissioni spa

CHIARAVALLI Trasmissioni spa INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.

More information

SPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS

SPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS AND DEIGNED FOR ROLLER The range of sprockets and wheels designed for chains manufactured by our Company provides an all-round solution to the needs of industry in the sector of flexible mechanical transmissions

More information

Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica

Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed

More information