(Nominal) L Belt weight (Belt/pin material)

Transcription

1 N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal pitch: 12.7 mm (0.50 in) Surface type: Flat Surface opening: 37% ackflex radius: 12.5 mm (0.49 in) Min flex (nosebar): 19.1 mm (0.75 in) in : 4.0 mm (0.16 in) T L elt weight Min No drive OM-D/6.6 / OM-D/6.6 / sprocket Carry per haft mm in N lbf N lbf kg/m lb/ft kg/m lb/ft Number of wear strips (min no) Return ITC 12.7 MM/0.50 IN STRIGT RUNNING STNDRD General belt tolerance is +0/-0.4% at 23 C/73 F and 50% R. For exact belt width contact Customer Service. Non standard belt width on request. Max. Load per Drive Sprocket. elt material: OM-D 1500 N (337 lbf), 1000 N (225 lbf). Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in) = Single Link

2 CS N lastic Modular elt Serie uni M-TT 37% CS elt material & color OM-D in material & color W T LG lternative pin material: 6.6 elt width ermissible tensile force (Nominal) L T Straight Running Nominal pitch: 12.7 mm (0.50 in) Surface type: Curved Surface opening: 37% ackflex radius: 12.5 mm (0.49 in) Min flex (nosebar): 19.1 mm (0.75 in) in : 4.0 mm (0.16 in) Curved surface makes perfect circle when 25.4 mm (1.00 in) flex is applied T L elt weight Min No drive OM-D/T / OM-D/T / sprocket Carry per haft mm in N lbf N lbf kg/m lb/ft kg/m lb/ft Number of wear strips (min no) Return ITC 12.7 MM/0.50 IN STRIGT RUNNING STNDRD General belt tolerance is +0/-0.4% at 23 C/73 F and 50% R. For exact belt width contact Customer Service. Non standard belt width on request. Max. Load per Drive Sprocket. elt material: 1000 N (225 lbf) Max. Spacing between wear strips. Carry: 152 mm (6 in); Return: 304 mm (12 in) = Single Link

3 Rubber Top elt Rubber Link Width mm in size mm in Flat W 03 W K K1200 K K Other Non Standard Rubber profiles: See uni Rubber rofile Overview. ackflex radius for Rubber Top: 28 mm (1.10 in) Flight hoto shows back side of flight. Front side is flat Drawing shows back side of flight. Front side is flat Material & color Width Link size Flat/Non Stick OM-D W K Minimum indent is for uni M-TT flight 0 mm. Increment: 12.7 mm (0.50 in).

4 Side Guard I Material & color I Closed OM-D W Minimum indent is for uni M-TT Side Guard. Increment: 12.7 mm (0.50 in). Roller C D Roller C D (min) (min) mm in lastic OM-D W Non standard Roller material and color: See uni Material and Color Overview. Non standard uni mflight for uni M-TT Travel direction rinciple sketch Other non standard option: See uni mflight Overview.

5 Sprocket No. of teeth ilot bore in mm ore size Overall itch ub -dimension -dimension mm in Single row/two way Double row/two way Molded 6 LG Machined 6 N Z12 x x x Z15 x x x Z x x Z24 x x x Z36 x x x Molded sprocket Machined sprocket Machined sprocket Non standard material and color: See uni Material and Color Overview. Nosebars Min. Dimensions mm in C C D D Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 6.5 mm (0.26 in) Width of sprocket = Single row: 17.5 mm (0.69 in) Double row: 30.0 mm (1.18 in) Max load per sprocket shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni M-TT. For more detailed sprocket information, contact Customer Service. uni M-TT 37%/170223