STRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP
|
|
- Claire Gordon
- 5 years ago
- Views:
Transcription
1 SIGH UNNING CHINS with low noise accumulation rollers Series BP BP BP SIDFXING CHINS with low noise accumulation rollers Series BP 878 B - BP 879 M BP 882 B - BP 882 M PPICION: FOOD ND BG INDUSY PCKGING IN (P BO PCKS ND CNS IN H SHINK FIM) GN PUPOS CONYING PPICIONS O DUC PSSU CD BWN PODUC ND FIGH SUFC. CHCISICS: HIS SIS OF HMOPSIC CHINS IS H SOUION O DUC CCUMUION PSSU. SM WIDH OS POID SB CONYING SUFC ND NB H PODUC O B HNDD WIHOU DMG, HOW H CHIN SI POIDS POSII FOWD MOION. OW NOIS OS HS CHINS PODUCD IN SIN SION WIH DUCD BCKIN PSSU
2 HY DUY SING HING SIGH UNNING CHINS WIH OW NOIS CCUMUION OS BP 8257 D=400 Ø Ø K = K1000 = 254 K1200 ollers manufactured in ow Friction and low noise material: reduced back-line pressure and low noise level Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also Flat op and rubber top chains = Pin material: ustenitic Steel Chain - ef. Width Plate oller N BP 8257 K ½ 5.65 BP 8257 K FG BP 8257 K Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN 8153 SYSM PS - CONYO CHINS-BS - Issue
3 BP 831 SING HING SIGH UNNING CHINS WIH OW NOIS CCUMUION OS D= Ø 6.35 Ø 11 ollers manufactured in ow Friction and low noise material: reduced back-line pressure and low noise level Pin material: ustenitic Steel Width Chain - ef. Plate oller N BP 831 K FG ¼ 2.15 Water blue BP831 K ½ 2.85 Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN SYSM PS - CONYO CHINS-BS - Issue 6.0
4 SIDFXING CHINS WIH OW NOIS CCUMUION OS BP 878 B Ø10.9 D= ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. Small sideflexing radius 200 mm Pin material: ustenitic Steel NOU-S CUS SONGY COMMNDD WIH HS CHINS! = Width Chain - ef. Plate oller N BP 878 B K FG Water blue ¼ SIDFXING CHINS FO MGNIC SYSM WIH OW NOIS CCUMUION OS BP 879 M Ø10.9 D= Ø High ultimate load ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. One conveyor construction asy to clean asy maintenance Note: Plastic magnetic system chains do not have tabs or bevels, it is the Stainless Steel pin in the chain which is attracted by the magnets embedded in the curve. Pin material: Ferritic Stainless Steel NOU-S CUS SONGY COMMNDD WIH HS CHINS! Width Chain - ef. Plate oller N BP 879 M K FG Water blue ¼ Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN 8153 SYSM PS - CONYO CHINS-BS - Issue
5 BP 882 B SIDFXING CHINS WIH OW NOIS CCUMUION OS K375 K450 NOU-S CUS SONGY COMMNDD WIH HS CHINS! ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. Pin material: ustenitic Steel Width Chain - ef. Plate oller N BP 882 B K FG ¾ BP 882 B K ½ 4.03 Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN SYSM PS - CONYO CHINS-BS - Issue 6.0
6 BP 821 DOUB HING SIGH UNNING CHINS WIH OW NOIS CCUMUION OS D=400 Ø Ø K750 = K1000 = 254 K1200 ollers manufactured in ow Friction and low noise material: reduced back-line pressure and low noise level = Pin material: ustenitic Steel Chain - ef. Width Plate oller N BP 821 K ½ 5.52 BP 821 K FG Water blue BP 821 K Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN SYSM PS - CONYO CHINS-BS - Issue 6.0
7 HY DUY SING HING SIGH UNNING CHINS WIH OW NOIS CCUMUION OS BP 8257 D=400 Ø Ø K = K1000 = 254 K1200 ollers manufactured in ow Friction and low noise material: reduced back-line pressure and low noise level Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also Flat op and rubber top chains = Pin material: ustenitic Steel Chain - ef. Width Plate oller N BP 8257 K ½ 5.65 BP 8257 K FG BP 8257 K Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN 8153 SYSM PS - CONYO CHINS-BS - Issue
8 BP 831 SING HING SIGH UNNING CHINS WIH OW NOIS CCUMUION OS D= Ø 6.35 Ø 11 ollers manufactured in ow Friction and low noise material: reduced back-line pressure and low noise level Pin material: ustenitic Steel Width Chain - ef. Plate oller N BP 831 K FG ¼ 2.15 Water blue BP831 K ½ 2.85 Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN SYSM PS - CONYO CHINS-BS - Issue 6.0
9 SIDFXING CHINS WIH OW NOIS CCUMUION OS BP 878 B Ø10.9 D= ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. Small sideflexing radius 200 mm Pin material: ustenitic Steel NOU-S CUS SONGY COMMNDD WIH HS CHINS! = Width Chain - ef. Plate oller N BP 878 B K FG Water blue ¼ SIDFXING CHINS FO MGNIC SYSM WIH OW NOIS CCUMUION OS BP 879 M Ø10.9 D= Ø High ultimate load ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. One conveyor construction asy to clean asy maintenance Note: Plastic magnetic system chains do not have tabs or bevels, it is the Stainless Steel pin in the chain which is attracted by the magnets embedded in the curve. Pin material: Ferritic Stainless Steel NOU-S CUS SONGY COMMNDD WIH HS CHINS! Width Chain - ef. Plate oller N BP 879 M K FG Water blue ¼ Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN 8153 SYSM PS - CONYO CHINS-BS - Issue
10 BP 882 B SIDFXING CHINS WIH OW NOIS CCUMUION OS K375 K450 NOU-S CUS SONGY COMMNDD WIH HS CHINS! ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. Pin material: ustenitic Steel Width Chain - ef. Plate oller N BP 882 B K FG ¾ BP 882 B K ½ 4.03 Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN SYSM PS - CONYO CHINS-BS - Issue 6.0
11 SIDFXING CHINS WIH OW NOIS CCUMUION OS BP 882 B D= Ø K = K1000 = K1200 ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. = Pin material: ustenitic Steel Chain - ef. Width Plate oller N BP 882 B K ½ 4.70 BP 882 B K FG BP 882 B K Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN 8153 SYSM PS - CONYO CHINS-BS - Issue
12 SIDFXING CHINS WIH OW NOIS CCUMUION OS BP 882 B D= Ø K = K1000 = K1200 ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. = Pin material: ustenitic Steel Chain - ef. Width Plate oller N BP 882 B K ½ 4.70 BP 882 B K FG BP 882 B K Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN 8153 SYSM PS - CONYO CHINS-BS - Issue
13 BP 882 M SIDFXING CHINS FO MGNIC SYSM HY DUY SING HING WIH OW NOIS CCUMUION OS D=400 Ø Ø = ollers manufactured in ow Friction and low noise material: reduced back-line pressure and quiet running. pin roller support has been added to maintain a flat and consistent carrying surface. (10-12 width only). One conveyor construction asy to clean asy maintenance Same hinge width available in many chain types, both steel and plastic, also Flat op and rubber top chains. = Note: Plastic magnetic system chains do not have tabs or bevels, it is the Stainless Steel pin in the chain which is attracted by the magnets embedded in the curve. = Pin material: Ferritic Stainless Steel Chain - ef. Width Plate oller N BP 882 M K ½ 3.90 BP 882 M K FG BP 882 M K Standard length: 40 pitches (5 ft m) Breaking oad according to Standard ISO DIN SYSM PS - CONYO CHINS-BS - Issue 6.0
STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55
STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M
More informationSTRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/
STAIHT UNNIN STEE CHAINS Series 812/815-812/815 800/802/805-8157 - 515 16 19 SIDEFEXIN STEE CHAINS Series 881-881O - 881 TAB - 881O TAB 881M - 881 MO - 881 MO - 8857M 8857 TAB - 1874 20 24 A OU STEE CHAINS
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationSeries SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationPRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationRexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
More informationmk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
More informationTableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
More informationBelt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
More informationStandard Metric Roller Chain (DIN 8180/8187 and BS 228)
Standard Metric Roller (DIN 10/17 and BS 22) Single Roller Size ISO itch p Between Inner lates b 1 2. 2.0.00. 2. 4. 6. 6. 9. 11.6 19.56 0.99.99. 4 Roller d 1. 4.00 5.00 6..51 7.77.16.07 15. 0 27.94 29.21
More informationThe uni SNB M2 belt increases performance in the following industries/applications:
uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More informationDOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
More informationAN SI Standard Roller Chains
RO LLER CH AIN S AN SI Standard Roller Chains SY's precision power transmission roller chains meet or exceed AN SI standard B29.1. Supplied in single and multiple strands of AN SI sizes from 3/8" to 3"
More informationConveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2
Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal
More informationPRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More information150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
More information+91-8048762018 Spectra Plast India Private Limited http://www.systemplaast.com/ Spectra Plast India Pvt. Ltd. is a renowned manufacturer and exporter of a comprehensive range of conveyor components and
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationConveyor chains INDUSTRIAL TECHNOLOGY. Tel: Fax:
Conveyor chains Tel: +32 51 200602 Fax: +32 51 225968 e-mail: sales@gallon.be 229 Conveyor chains with straight attachment plates for fitting to IWIS chains DIN 818, 8188 and 8181 Conveyor chain straight
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More informationHYDRAULIC MOTORS GENERAL INFORMATION
GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers
More informationRex 1701 Multiflex Chain
1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate
More informationSPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER. Sokółka 20...
SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete main frame 3 2. Wrapping foil feeder 7 3. Stretcher roll, set 11 4. Complete
More informationConveyor system XB. System information X45 XLP X85 X85P XKP FST XMY XLX XMX GRX CSX ELV CTL APX IDX. Chain width 175/295 mm.
Conveyor system System information PO X45 XS Chain width 175/295 mm Features Chain travels on four slide rails. Wide track sideflexing safety chain. Compact horizontal and vertical bends. Suitable for
More informationSTEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
More information300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
More information83mm Stainless Steel Conveyor System
SM 83mm Stainless Steel Conveyor System SM FlexMove Product Catalogue 333 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. SM Series
More informationLOW PROFILE POWER UNITS 10 to 30 Gallon Reservoir Capacity L O W P R O F I L E P O W E R U N I T S
OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity O W R O F I O W R U N I S 74 OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity ow rofile ower Units are designed for use in locations where space is at a
More informationFIX-WHEEL RAILS. rationalisation, transportation, automation
FIX-WHEE RIS DBGM rationalisation, transportation, automation IN SOCK he following items can always be delivered immediately from stock: CCESSORIES broad range of standard accessories supplements and simplifies
More informationFL SERIES: 150 mm Conveyor System
: 150 mm Conveyor System Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width
More informationFC SERIES. FC Series Characteristic Beam Width: 105mm Product Width: Refer to Guide Rail Assembly
Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width to be conveyed can be referred
More informationClean Line Stainless steel
www.puzzleadvance.com Clean Line Stainless steel operating parts lock systems hinges profile rubber linear systems anti-fadigue mats clamping technology standard elements operating magnets Clean Line With
More informationDELTA HR RANGE & THE DELTA TREATMENT
Cas fo bck ad dusy I som appcaos as bcks ad s duss w vom s of my abasv (dus, sduas) SEDIS as souo agas wa du o abaso : DET HR RNGE & THE DET TRETMENT o m opag codos T Da am s spcay suab fo: > basv vom
More informationRex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
More informationConveyor track made of section profiles and roller elements
-4 MGE 1. Elements for manual movement Conveyor track made of section profiles and roller elements Economical solution for manual slide sections Roller elements can e clipped in Accessories: Roller elements
More informationProtistor size 70 gr 690VAC (IEC)
Protistor size 70 gr SEMICONDUCTOR PROTECTION FUSES SQUARE BODY HIGH-SPEED FUSE-LINKS AC PROTECTION FEATURES & BENEFITS Excellent cycling capability Multiple body sizes and terminals or blades combination
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationVarioFlow Lateral Guide Generation 2. Customer Presentation
VarioFlow Lateral Guide Generation 2 Customer Presentation Market Requirements Your requirements: A compact, clearly designed lateral guide system for numerous standard applications and customized solutions
More informationNER2G & NER2P Electric Chain Hoist with Manual Trolley Food Grade Model Specifications and Dimensions
NR2G & NR2P lcc Hos w Ml Tolly Food Gd Modl Spcfcos d Dsos p. PURPOS To povd dso d spcfco foo fo sl d dl spd food d NR2 odl lcc c os qppd w l ps d d ollys. IMPRIA SPIFIATIONS - SING SPD HOIST WITH GARD
More informationTS 5 Transfer System Version 2.0
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service TS Transfer System Version.0 The Drive & Control Company 0 Bosch Rexroth AG TS.0 3 0 30 (00. Symbols No.
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationEz2 Rotary Action File
z2 otary Action File Commercial and SA Book and Specification uide Version 5.0 ffective February 1, 2012 z2 eneral Information & Specifications z2 otary Action File 1 BAS: he z2 base is formed out of
More informationFS SERIES. FS Series Characteristic Beam Width: 65mm Product Width: Refer to Guide Rail Assembly
SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width to be conveyed can be referred to guide rail assembly
More informationNylon Cable Chains Light Series
s Light Series Series S00 page 40 Series S50L-S50LI-S50LE page 4 Series S0090-S0091-S009 page 44 Series S5LI/LE page 46 Series S5L page 48 Series S5L-S5LI-S5LE page 50 Series S9 page 5 Channel guide for
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More information1/96 N Our policy is one of continued research and development. We therefore reserve the right
Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide
More informationFinally all the action you were looking for!
Finally all the action you were looking for! System Plast presents an unprecedented range of products. Based on a long experience in the field, System Plast have worked hard on product development. Now
More informationSC 103mm Stainless Steel Conveyor System
SC 103mm Stainless Steel Conveyor System SC FlexMove Product Catalogue 347 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. SC Series
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More information7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
More informationMulti-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
More informationSection 5 Transverse Conveyors
8981 00 22 11/07 TS4plus inear Motion and Assembly Technologies Bosch Rexroth Corp. -1 Section Transverse Conveyors BS4 are designed to transfer pallets for short transport distances (e.g. between two
More informationThe Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
More informationuni MPB Straight running
88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationThe right chain! Approved Performance from Rexnord. Conveyor chains W-Series. MODULE_11/GB/2014/02 // No liability accepted for misprints or errors!
pproved Performance from Rexnord Conveyor chains W-Series Conveyor chains - W-Series pproved Performance from Rexnord. Fulfils NSI quality requirements Link plate Carbon steel Pin Carbon steel, press fit
More informationI-BEAM 348 and 458 Overhead Heavy Duty Monorail Conveyor
I-BEAM 348 and 458 Overhead Heavy Duty Monorail Conveyor Standard Conveyor 2 3/8" 1" Ø11/16" 4" 8" 41 Standard Conveyor I-BEAM TRACK & CHAIN 3" & 4" I-BEAM TRACK Hi-Carbon Steel Track The Richards-Wilcox
More informationuni MPB Straight running
87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationDIN EN General
DIN EN 10357 General DIN EN 10357 was developed for seam welded tubes made of stainless steel for pipeline systems in the food, pharmaceutical and chemical industries. DIN EN 10357 (2014-3) replaces DIN
More informationHYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
More informationMay 2011 English Version Issue 3.6
E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power
More informationKP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER
KP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER Robust all-rounder with variable inner distribution 2 height mm widths 50 mm Pitch 35 mm Additional load up to 2 kg/m Travel
More informationConveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
More informationIndustrial Hose & Couplings METALLIC HOSE ASSEMBLIES
Industrial Hose & Couplings METALLIC HOSE ASSEMBLIES PRODUCT INDE The improved Stainless Steel Annular Hose from Tubest is now manufactured to the newly introduced European ISO3 Standard. This has been
More informationCardan Shaft Coupling
Crdn Shf Couping 55 Crdn Shf Couping GF Series 21 R < 3,2µm imension ppy o unighened unis. Type d w* M c Fnge M Numer of kg mm knm mm mm mm mm mm mm mm os** Nm os** G F 58-21 20 0,12 60 18 22 58 47 30
More informationSS 63mm Stainless Steel Conveyor System
SS 63mm Stainless Steel Conveyor System SS FlexMove Product Catalogue 319 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. FV Series
More informationHydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
More informationUhing Lineartriebe Uhing Linear Drives. Rollringgetriebe Rolling Ring Drives. Zahnriemenantriebe Timing Belt Drive
Uhing Lineartriebe Uhing Linear Drives Rollringgetriebe Rolling Ring Drives Zubehör Accessories Wälzmutter Linear Drive Nut Zahnriemenantriebe Timing Belt Drive Klemm- und Spannelemente Clamping Systems
More informationChain Guides for Roller Chains as per DIN 8187
Chain Guides for Roller Chains as per DIN 8187 Type T DIN 8187 chain no. Chain dimensions in inches B H b h Article no. 06B-1 3/8 x 7/32 15 10 5,4 1,5 221 010 002 083-1 1/2 x 3/16 15 10 4,5 1,5 221 010
More informationTo contents. STEP-files S620 S
STEP-files S620 S620 www.carryline.com 2 Technical specifica on S620 Width of chain Chain pitch Width conveyor profile Height conveyor Radius conveyor chain on the drive and idler unit Max. permi ed trac
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
More informationFree Flow Chain. Free Flow Chain. Top Roller Chain. 2.5x Speed. Low Noise
Double itch Free Flow Chain Free Flow Conveyor his is a conveyor system where the speed of conveyed objects can be freely controlled and stopped at any time and at any position for accumulation or for
More informationROSTA Tensioner Devices
OSTA Maintenance-free tensioner systems for belt and chain drives Easy to install available in 7 standard sizes wide range of accessories available Customer Benefits from using OSTA SE Guarantees the lowest
More informationSpare Parts List. Edition 10/07
Spare Parts List Edition 10/07 Spare Parts List for the following products Table of Contents PRODUCT NUMBER CATALOG NUMBER PRODUCT DESCRIPTION 103957 BP-IP300 BRADY IP PRINTER - 300DPI STANDARD 103958
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationSPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół. Sokółka 20...
SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete lower frame 3 2. Wrapping film feeder 9 3. Movable frame 13 4.
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More informationPRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
More informationTubes -3- Colour Chart -4- Metal Joint Components -6- Metal Joint Assemblies -11- Plastic Joints -15- Roller Tracks -16- Accessories -21-
FlowTube GS-ACE (General Storage And Construction Equipment) offers a range of modular components that enables the design and build of a variety of versatile structures to aid storage, assembly, manufacturing
More informationMay 2009 English Version Issue 3.0
S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information
More informationCONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP
CONVEYOR INSTALLATION MANUAL I VERSION 1 Rexnord TableTop and MatTop Chains Rexnord Roller Upgrade System REXNORD FLATTOP Rexnord Industries, LLC For more than one hundred years, Rexnord has provided superior
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks
-SERIES S-SERIES Metric Machine Screw Jacks Power Jacks are a manufacturer focused on providing customers with the best engineered solution for precision linear actuation, power transmission and mechanical
More informationmarkilux 1300 Basic The awning which sets exacting standards PATIO AND BALCONY AWNINGS safe timeless beautiful
PTIO ND BLCONY WNINGS safe timeless beautiful markilux 1300 Basic The awning which sets exacting standards rated to wind resistance class 2 (corresponds to Beaufort 5) www.markilux.com markilux markilux
More informationFlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains
FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of
More informationDIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationModel 104 Slider Belt Conveyor
Model 104 Slider Belt Conveyor Model Description: The Model 104 Slider Bed Belt is designed with the systems approach in mind. The square head and tail end terminals allow you the flexibility to combine
More information