Ammeraal Beltech Modular
|
|
- Brianna Hampton
- 5 years ago
- Views:
Transcription
1 Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application
2 Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8
3 atasheet: uni Guide Rings Accessories uni Guide Rings No of teeth Overall diameter Clamping diameter radius R c Thickness of ring T mm in mm in mm in Shape of ring Type T Type A A A A R c Standard A A A Type B A A A A A R c T A B B B B The sprockets for the steel chains uni 810/812/815/800/802/805 can be supplied with guide rings if the drive sprockets are to guide the chain. All guide rings are supplied with 3 clamping holes ø 4.8 mm (0.19 in). Standard material IN
4 atasheet: uni Guide Rings Conveyor Belt Seamless Belt Modular Belt Timing Belt Solid advice For all your belting needs Local stock & service This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery. as applied by its operating companies. Transmission Belt Fabriation & service uni Guide Rings/0812 Ammeraal Beltech Modular A/S Hjulmagervej 21 K-7100 Vejle T F admin@unichains.com 4
5 atasheet: uni Retainer Rings Accessories uni Retainer Rings A B uni Retainer Rings B C A* mm in mm in mm in Standard C Prepared for M5 set screw ( 1 / 4-20) 40 x 40 mm ø80 ø x50 mm ø103 ø x 60 mm ø124 ø4.9 1 in x 1 in ø52 ø in x 1.5 in ø80 ø in x 2.5 in ø124 ø4.9 uni Retainer Rings B C A* mm in mm in mm in ø20 mm ø39 ø1.5 ø25 mm ø44 ø1.7 B ø30 mm ø50 ø2.0 ø40 mm ø63 ø2.5 ø50 mm ø75 ø3.0 ø1 in ø44 ø1.7 ø1.5 in ø63 ø2.5 ø2 in ø75 ø3.0 Prepared for M5 set screw ( 1 / 4-20) * Use sprocket sizes that ensure that the belt or chain do not conflict with uni Retainer Rings. Available in sets of 4 rings and sets of 20 rings. C Material & color PA6-GF B 5
6 atasheet: uni Retainer Rings Conveyor Belt Seamless Belt Modular Belt Timing Belt Solid advice For all your belting needs Local stock & service This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery. as applied by its operating companies. Transmission Belt Fabriation & service uni Retainer Rings/0812 Ammeraal Beltech Modular A/S Hjulmagervej 21 K-7100 Vejle T F admin@unichains.com 6
7 atasheet: Idler EN Accessories Idler No. of teeth of Corresponding sprocket B Overall diameter Min Bore d Max mm in mm in mm in mm in mm in L STANAR Standard material POM- N L All idlers are supplied with pilot bore. Idlers are available for: uni 810, uni 812, uni 815, uni 881, uni Magnet, uni 881 Super Flex, uni 8811, uni 8811 Super Flex, uni 820, uni 831, uni 879, uni 879 Super Flex, uni 880 and uni 880 Super Flex. d B 7
8 atasheet: Idler Conveyor Belts Seamless Belts Modular Belts Timing Belts This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission Belts Idler/ Fabrication & service Expert advice, quality solutions and local service for all your belting needs Ammeraal Beltech Modular A/S Hjulmagervej 21 K-7100 Vejle T F admin@unichains.com 8
9 ate: Conveyor Belts Seamless Belts Modular Belts Timing Belts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission Belts Fabrication & service Global Headquarters: Ammeraal Beltech Holding B.V. P.O. Box 38, 1700 AA Heerhugowaard The Netherlands T F info@ammeraalbeltech.com
Ammeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More informationuni CSB The versatile plastic modular belt for the Automotive Industry
uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationYour business is our business!
EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing
More informationYour business is our business!
GB Your business is our business! Belts for the Wood Industry Ammeraal Beltech:» knows your process» for all your belting needs» just-in-time delivery www.ammeraalbeltech.com Knowing your production process
More informationSoliflex PRO & Soliflex PRO mini
EN Introducing the Soliflex PRO mini Soliflex PRO & Soliflex PRO mini NEW The Ultimate Hygienic Belt A Win-Win for the Food Industry: Ultimate hygiene and lower total cost of ownership With over 65 years
More informationBelts for the Confectionery Industry. Your business is our business!
NA Your business is our business! Belts for the Confectionery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery www.ammeraalbeltech.com We know your production
More informationBelts for the Bakery Industry. Your business is our business! Ammeraal Beltech knows your process for all your belting needs just-in-time delivery
EN Helping you bake it better! Your business is our business! Belts for the Bakery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery Knowing your production
More informationBelts for the Tobacco Industry. Your business is our business!
EN Pyrolysis-Compliant Your business is our business! Belts for the Tobacco Industry Your Belt Partner, providing the perfect solutions for: green leaf processing primary processing secondary manufacturing
More informationEngineered Belts. Combined material solutions for precision and customized product control
EN Engineered Belts Combined material solutions for precision and customized product control Engineering techniques and covering materials Precision ground profiles on any axis of the belt or cover, control
More informationOverview Standard Profiles
EN profiles Overview Standard Profiles www.rydell.com.au 2 On the basis of its many years interaction with engineers and end users, Ammeraal Beltech has developed a comprehensive range of profiled belts,
More informationPROFILES. Overview Standard Profiles.
EN PROFILES Overview Standard Profiles 2 On the basis of its many years interaction with engineers and end users, Ammeraal Beltech has developed a comprehensive range of profiled belts, capable of meeting
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationTiming Belts Our product range
GB Timing Belts Our product range» Standard program» Production engineering» Joint techniques» Cleats» V-guides» Special surface coating» Sprockets» Tools 02 03 Bode Belting More than 30 years experience
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationT L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More information300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
More informationNEW. Plastic Modular Belt Series > uni RTB M1 > uni RTB M2
UK NEW Plastic Modular Belt Series > > uni RTB 2 Pitch 50.8 (2.00 in.) uni RTB - State of The Art in Roller Top Modular Belts The new uni RTB belt is the most flexible and reliable handling solution for
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationMartin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
More informationT L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationRex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationBottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
More informationROUND LINK CHAIN DRIVE SYSTEM
524 0508 274 366 customerservices@bridoncookes.co.nz Round Link Chain Drive Systems.... 526 Introduction.... 526 Solutions to Old Problems.... 527 Applications.... 528 Tecdos Omega Drive.... 529 Pocket
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationTECDOS Omega Drive. TOUGH DRIVE for any environment. For horizontal, vertical and rotational drive applications. Problems you may have encountered
TECDOS Omega Drive TOUGH DRIVE for any environment For horizontal, vertical and rotational drive applications Advantage Round steel chain Advantage Minimum wear 2 Problems you may have encountered Disadvantages
More informationRAPPLON Tools & Accessories Catalogue. Issue for workshop staff & fitters.
RAPPLON Tools & Accessories Catalogue Issue for workshop staff & fitters 1 www.ammeraalbeltech.com Introduction The RAPPLON Tools and Accessories Catalogue features a complete range of tools for fabrication
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationTaper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B
T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex
More informationExtra Heavy Duty modular belts 2508 & 2630 Series
Extra Heavy Duty modular belts 2508 & 2630 Series EMERSON. E CONSIDER IT SOLVED. APPLICATIONS Pictures by courtesy of Hohmeier Anlagenbau GmbH and Audi AG Ingolstadt - Germany 2508 HEAVY DUTY BELTS PATENT
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationPRECISION MOTION CONTROL
PRECISION MOTION CONTROL P535 - series s The P535 series provides a combination of optimum size and price for use in instrumentation applications that require digital control of position and speed. Features
More informationSPROCKETS for belts series
eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationKlübermatic Accessories
Klübermatic Accessories Extensions Picture Extensions Brass Stainless steel KM Extension R1/o G1/4i 30mm 838212 Extensions Mounting Accessories Protection Caps, Support Flanges and Prefilling Assembling
More informationModular belt conveyor WL678X
Modular belt conveyor 678X Contents System information...139 Conveyor sections...140 Modular Belts - Introduction...141 Modular belts...142 Conveyor Beams - Introduction...143 Conveyor frame components...145
More informationModular belt conveyor WL526X
Modular belt conveyor 526X Modular plastic belt conveyor 526X Contents System information...123 Conveyor sections...124 Modular Belts - Introduction...125 Modular belts...126 Conveyor Beams - Introduction...127
More informationModular belt conveyor WL374X
S Modular belt conveyor Contents System information...107 Conveyor sections...109 Modular Belts - Introduction...110 Modular belts...111 Conveyor Beams - Introduction...112 Conveyor frame components...114
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More informationP (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE
Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationRexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More information150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
More informationCAM CLUTCHES BREU SERIES
CAM CLUTCHES BREU SERIES TSUBAKI EMERSON - the working principle of lift-off Cam Clutches - 2 Cams of BREU series Cam Clutches are designed to lift off, having no more contact with inner- and outer race
More informationSPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS
AND DEIGNED FOR ROLLER The range of sprockets and wheels designed for chains manufactured by our Company provides an all-round solution to the needs of industry in the sector of flexible mechanical transmissions
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationPOM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationSuper-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationCombiPro. Heavy duty process pump according to API 610, API 682, API 685
CombiPro Heavy duty process pump according to API 6, API 682, API 685 The Combi system is a modular programme of single stage centrifugal pumps with a high degree of interchangeability of parts between
More informationExtra Heavy Duty Modular Belts 2508 & 2630 Series
Extra Heavy Duty Modular Belts 2508 & 2630 Series Applications Dual Strand Test Tunnel Sgle Strand Car Wash Individual Pushers Mount Easily On Belt Surface Pictures by courtesy of Hohmeier Anlagenbau GmbH
More informationSC 103mm Stainless Steel Conveyor System
SC 103mm Stainless Steel Conveyor System SC FlexMove Product Catalogue 347 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. SC Series
More informationLarge & Small Pitch Heavy, Super & Ultra Double Pitch Leaf. Corrosion Resistant. Stainless Steel Nickel-Plated Neptune Industrial Plastic Poly Steel
ROLLER CHAINS ANSI Large & Small Pitch Heavy, Super & Ultra Double Pitch Leaf Attachment Lube-Free Carbon Steel & Stainless Steel Corrosion Resistant Hollow Pin LAMBDA Xceeder (Felt Seal) Plastic Stainless
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationDN 1/4" to 2" Threaded Female BSP -10 C C Max Pressure : Bars Specifications : Reduced bore High pressure Hydraulic type
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2" Threaded Female BSP -10 C + 100 C Max Pressure : 315 500 Bars Specifications : Reduced bore High pressure Hydraulic type Materials : Galvanized
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
More informationIndustrial Chain and Conveying
Industrial Chain List Price Book Industrial Chain and Conveying Chain, Idlers, Engineered Chain, Conveying Equipment 102-606 October 1, 2017 Supersedes January 1, 2017 TABLE OF CONTENTS Chain Lengths and
More informationP (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
More informationChain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
More informationWhy Choose Rexnord? 866-REXNORD/ (Within the U.S.) (Outside the U.S.)
866-REXNORD/866-739-6673 (Within the U.S.) 414-643-2366 (Outside the U.S.) www.rexnord.com Why Choose Rexnord? When it comes to providing highly engineered products that improve productivity and efficiency
More informationCAM CLUTCHES MZEU-K SERIES
CAM CLUTCHES MZEU-K SERIES TSUBAKI EMERSON - the evolution of Cam Clutches - 2 Ratchet clutch Roller ramp clutch Cam clutch Tsubaki MZEU-K Cam Clutches are sprag type oneway clutches and leader in its
More informationtorque limiters - CLUTCHES
torque limiters - CLUTCHES TORQUE LIMITERS - CLUTCHES: introduction ComInTec torque limiters are mechanical components necessary to fit along the kinematic chain and are preferred to electronic safety
More informationPARTS MANUAL POL-7.5L POLY ELECTRIC SPREADER. Air-Flo Manufacturing Co., Inc.
Manufacturing Co., Inc. PARTS MANUAL POL-7.5L POLY ELECTRIC SPREADER Air-Flo Manufacturing Co., Inc. 40 South Main Street, Prattsburgh, NY, 14873 (607) 522-3574 (607) 522-4412 (Fax) www.air-flo.com (9/9/11)
More informationStainless steel systems
Stainless steel systems Copyright FlexLink 2014 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has
More information+91-8048762018 Spectra Plast India Private Limited http://www.systemplaast.com/ Spectra Plast India Pvt. Ltd. is a renowned manufacturer and exporter of a comprehensive range of conveyor components and
More informationOEM Products CHAIN & CHAIN COUPLINGS
WWW.NTL-BPT.COM OEM Products CHAIN & CHAIN COUPLINGS ANSI STANDARD - SINGLE Single Strand Standard Chain s Length P d1 max. b1 min. d2 max. L max. Lc max. h2 max. T max. kn kn kn 25-1R* 6.35 3.3 3.18 2.31
More informationService Life and Performance are Critical,
When Conveyor System Service Life and Performance are Critical, Do it Right the First Time with Gates! The Right Tools and Expertise For Performance Design Gates meets the needs of the materials handling
More informationPULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS
PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS PAGE 2 Table of Contents: Drive and Bore Adaptors..3 Clevis Adaptors.4 Shoulder Adaptors.5 Flat Idler Pulleys..6 Flat Idler Pulleys Continued
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationSeries R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]
Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More information