FLEXBELTS BENEFITS PROGRAMME AND...
|
|
- Meryl Morris
- 5 years ago
- Views:
Transcription
1 FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch pitch, the smallest available in the world; the 1255 and 7956 have a 1.25 inch pitch, for heavier products. SIDEFLEXING AEROSOL CAN CONVEYOR WITH 505-SERIES PLASTIC FLEXBELT. BENEFITS Excellent guiding Due to the shape of the belts, supported by Positrack lugs and cleverly shaped strips in the 505 and 1255 and by hold-down tabs in the 7956, the flexbelts offer optimum guiding possibilities both in curves and on straight sections. Even S-curves are possible. Optimum use of space The inside radius of the belts can be as small as two times the width, reducing the required space. Superior product handling The surface design with small gaps and the minimal cordal action result in the best possible stability of the products. Easy installation and maintenance The belts can be fitted and removed in a few seconds. Fewer drives With all these belts, you do not only cover the bend, but you can also extend the conveyor by adding straight sections, thus saving drives. PROGRAMME 505 Radius belt with Positrack (RBP) To create a continuous product flow, even of small, unstable products. Open area is 10% Radius belt with Positrack (RBP) The most versatile belt, combining relatively small transfers with a high working load. Open area is 39% Radius belt with Tabs (RBT) For large and heavy products. Open area is 16%. SHRINK-WRAPPED BOTTLES ON 1255-SERIES FLEXBELT. AND... Flexbelts are made of green-blue, extra low-friction XLG-polyacetal. Ask our Application Consultants to calculate the best solution for your line. 62
2 505-SERIES FLEXBELTS page 109 page 153 RADIUS 505 WITH POSITRACK page 158 page 135, 136 Assembly Belt type Code nr. Width Temp. Temp. Max. working Sideflex Weight Backflex range range load straight/ radius radius A dry wet in curve (21 O C) (min.) (min.) mm O C O C N mm kg/m 2 mm XLG-MATERIAL (POLYACETAL, GREEN-BLUE) POSITRACK RBP 505 XLG to 80 4 to ; TWO SIDES RBP 505 XLG to 80 4 to ; RBP 505 XLG to 80 4 to ; RBP 505 XLG to 80 4 to ; RBP 505 XLG to 80 4 to ; RBP 505 XLG to 80 4 to ; STANDARD POSITRACK LUGS ON BOTH SIDES PIN RETENTION CLIPS FOR EASY (DIS)ASSEMBLY CURVE GUIDING PROFILE FOR Pitch. Double Positrack guiding lugs in combination with cleverly shaped strips ensure positioning of the belt in the curve. The sideflex radius is measured on the inside of the belt. The belt can be supplied from stock in standard lengths of 10 feet (3.048 m) in widths from 255 up to 680 mm; wider belts will be tailor-made on request. The pins are locked by means of retention clips. The curve guiding profile for the 505 has a standard length of 2 meters; it is made of MCC 3500 special polyamide, code nr For straight sections the same construction can be used as for the 500-, and 1005-series, ideal for standardisation in conveyor design. For 505-series flexbelts you can order a complete tab curve; for details see page
3 SPLIT AND IDLERS ROUND BORE MACHINED METRIC BORES AND KEYWAYS SS SS SS INCH BORES AND KEYWAYS SS SQUARE BORE MACHINED METRIC BORES SS x x SS x x SS x x INCH BORES SS x x
4 SPLIT AND IDLERS FOR 505 BELTS ROUND BORE INJECTION MOULDED METRIC BORES AND KEYWAYS SS INCH BORES AND KEYWAYS SS / FOR 505 BELTS SQUARE BORE INJECTION MOULDED METRIC BORES SS x x INCH BORES SS /2x1 1 / x
5 CLASSIC AND IDLERS ROUND BORE METRIC BORES AND KEYWAYS CS CS CS CS INCH BORES AND KEYWAYS CS CS / E F SQUARE BORE B 13.3 A METRIC BORES CS x x CS x x CS x x CS x x INCH BORES CS x x CS /2x1 1 / x
6 TAB CURVES P page 7 TAB CURVES WITH COMBINED UPPER AND RETURN PART More than 4 tracks, other angles and non-standard tab curves on request. Curves can be supplied with mounted M8 or M10 inserts. page 15, 16 For Code nr. Radius R Basic width B Height H Nr. of Pitch P Curve width Angle chain types mm mm mm tracks mm mm VERSION O SRH O O O VERSION O RH(D) O 60 T 31 M O O VERSION O RH(D) O 60 T 42 M O O, 64 TAB CURVES WITH SEPARATE UPPER AND RETURN PART Other angles and non-standard tab curves on request; these curves include a curve guiding profile. For belt types Code nr. Radius R Belt width A Height H Curve width B Angle mm mm mm mm VERSION RBP VERSION RBP
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationPRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
More informationDOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
More informationMatTop Chains. Overview Rexnord MatTop Chains. Solid Top Chains Hybrid. Perforated Top Chains 6391T. RubberTop Chains
MatTop Chains Solid Top Chains 1000 1005 1010 2000 2015 3125 5935 6300 6995 6995 Hybrid 7700 8505 Perforated Top Chains 500 1000 2000 2016 5936 6391T 7706 8506 Overview Rexnord MatTop Chains RubberTop
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationRexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationSeries R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]
Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationTableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
More informationmk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
More informationSeries SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
More information7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
More informationRexnord TableTop and MatTop Chains
Rexnord FlatTop Engineering Manual Rexnord TableTop and MatTop Chains Engineering Manual Engineering Manual Flattop SAFETY CONSIDERATIONS Product Safety: Products designed and manufactured by Rexnord are
More informationRex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
More informationN e W. modular plastic belts 7300 and 7200 series
N e W REGINA Chain Products* are available from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)358-330 (800)638-830 fx: (40)358-342 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com
More informationFlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains
FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More information2250 FT FLAT TOP BELTS (Pitch mm)
220 FT FLAT TOP BELTS (Pitch 1-2.4 ) 8 2.4 4.3 Version standard Backflex radius: 2 Max load capacity: 2.000 N/m eight: 9.30 Kg/m 2 FOR BELTS AVAILABLE IN MATERIAL JUST ADD TO PART NUMBER (EXAMPLE CODE
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationPRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationRex 1701 Multiflex Chain
1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationCOMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...
COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading
More informationAdvised minimum width SLIDING ROLLERS SERIES 20
Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationSTRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55
STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationSingle action two way cross block
Connecting clamps Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail
More informationConveyor system XB. System information X45 XLP X85 X85P XKP FST XMY XLX XMX GRX CSX ELV CTL APX IDX. Chain width 175/295 mm.
Conveyor system System information PO X45 XS Chain width 175/295 mm Features Chain travels on four slide rails. Wide track sideflexing safety chain. Compact horizontal and vertical bends. Suitable for
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationHTD - Timing Belt Drives. Mustang Speed Mustang Torque
HTD - Timing Belt Drives Mustang Speed Mustang Torque SIT Timing Belt Drives SIT Timing belts are modern drive elements made of high-quality materials and produced according to the latest manufacturing
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationLOCKING BUSHES & SHAFT COLLARS
LOCKING BUSHES & SHAFT COLLARS INDEX TAPER BUSHES Page 3 WELD-ON HUBS Page 4 QD BUSHES Page 5 MECHANICAL LOCKING BUSHES CAL1 (Not Self-Centering) Page 6 CAL2 (Not Self-Centering) Page 7 CAL3 (Self-Centering)
More informationuni CSB The versatile plastic modular belt for the Automotive Industry
uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is
More informationConveyor system X300. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Chain X300. Technical characteristics
Conveyor system X300 Contents System information...281 Chains X300...282 Chain accessories X300...282 Beam components X300...283 Beam accessories X300...284 Slide rails X300...284 Drive and idler units
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationSection 10 Conveyors and Transport Components
1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements
More informationRex 881 TableTop Chain Side-flexing
Prefix S SS 881 Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/4 3.25 82. 6 18.00 7. 2 2.00 2.97 4-1/2 4. 1 3 00 609. 6 2. 3.71 7-1/2 7. 19 5 00 609. 6 3.70 5.49 Cha Carbon Staless
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More informationRexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop
More informationConveyor system X180. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Chain X180. Technical characteristics
Conveyor system X1 Contents System information...271 Chains X1...272 Chain accessories X1...27 Beam components X1...27 Beam accessories X1...2 Slide rails X1...275 Drive and idler units introduction...276
More informationModular Belts and Components for Nose Over Transfer
Modular Belts and Components for Nose Over Transfer INDEX ABSTRACT End-to-end transfer description and general criticalities... 3 Regina solution to best tackle end-to-end transfer... 3 Regina ½ pitch
More informationFlexLink conveyor Series Y
FlexLink conveyor Series Y 3 Introduction New conveyor with focus on hygiene The new FlexLink hygiene conveyor was designed to meet the following requirements of special interest to the dairy, food, and
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationConveyor system X300. System information X45 X65 X65P X85 X85P XKP X180 X300 ELV CTL FST APX IDX. Contents. Chain X300. Technical characteristics
Conveyor system X300 Contents System information...279 Chains X300...2 Chain accessories X300...2 Beam components X300...281 Beam accessories X300...282 Slide rails X300...282 Drive and idler units introduction...284
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationC O N V E Y O R B E L T S
CONVEYOR BELTS GENERAL INDEX INFO....................................................... 3-9 Why Eurobelt Product Range Materials INFO SERIES 20.................................................. 10-23
More informationADJUSTABLE PITCH SERIES
ADJUSTABE PITCH SERIES FEATURES: Stock Sizes - 1 and 2 grooves up to 25 HP Both 1 and 2 groove adjustable sheaves permit variations of as much as 30% in speed when used with a fixed diameter sheave Available
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More informationRexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
More informationMulti-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
More informationRex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
More informationMagnetic particle clutches and brakes
Accurate torque control with instantaneous engagement! Warner Electric Precision Tork magnetic particle clutches and brakes are unique because of the wide operating torque range available. Torque to current
More informationChain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
More informationMartin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationSTRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/
STAIHT UNNIN STEE CHAINS Series 812/815-812/815 800/802/805-8157 - 515 16 19 SIDEFEXIN STEE CHAINS Series 881-881O - 881 TAB - 881O TAB 881M - 881 MO - 881 MO - 8857M 8857 TAB - 1874 20 24 A OU STEE CHAINS
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More information300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511
More informationSS 63mm Stainless Steel Conveyor System
SS 63mm Stainless Steel Conveyor System SS FlexMove Product Catalogue 319 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. FV Series
More informationThe HKK Solid Advantage
The HKK Solid Advantage HKK Chain, with its cold-forged, solid bushings, solid rollers, and specially treated pins and bushings provides a unique advantage over conventional chains. HKK s cold forging
More informationT L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More informationOmni-Pro 075. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and
More informationTo contents. STEP-files S620 S
STEP-files S620 S620 www.carryline.com 2 Technical specifica on S620 Width of chain Chain pitch Width conveyor profile Height conveyor Radius conveyor chain on the drive and idler unit Max. permi ed trac
More informationMay 2009 English Version Issue 3.0
S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International
More informationRaw Edge Molded Cog Classical V Belts & High Power Molded Cog Wedge Belts
Raw Edge Molded Cog Classical V Belts & High Power Molded Cog Wedge Belts standards DIN 2215/DIN 7753 (Part 1) ISO 4184 BS 3790 ISO 4183 Protorque Raw Edge Molded Cog Classical V and High Power Wedge Belts
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
More informationOmni-Pro 120. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 120 USA and
More informationHTD Pulley & Belt Drives
HTD Pulley & elt Drives HTD timing belts offer optimised load distribution through the rounded tooth form, guaranteeing high power transmission in low speed and high torque applications. apable of transmitting
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationMay 2011 English Version Issue 3.6
E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power
More informationConveyor Solutions CS70
Conveyor Solutions CS70 Primary Packaging Product Catalogue Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages,
More informationDistributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative
More informationBottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More information