Martin Series 800 Conveyor Sprockets
|
|
|
- Bryan Fox
- 5 years ago
- Views:
Transcription
1 800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT. # 4,964,842 Split 815/820 Solid and Grooved Face with Guide Ring Holes Steel and Thermoplastic 821 Heavy Duty for Wide Hinged Chain Straight Running 880 and 882 Single Duty for Side Flex Chains 881 for Side Flex Chain Sprockets for 815, 820, and 881 are all double duty. Sprockets with odd numbers of teeth are recommended for longer wear since a given tooth engages the chain every other revolution. Sprockets with 19, 21, 23, and 25 teeth are preferred. Sprockets with even number of teeth should be advanced one tooth periodically to attain even wear. A-6
2 800 Series Split SPECIALTY Martin QRS Split Sprocket Series 815/820 Split Sprockets for Flat Top Conveyor Chains Split Sprockets Manufactured from Steel and Thermoplastic Material Stocked in 21, 23, 25, and 27 Tooth Sizes Martin s Quick Replacement Split Sprocket eliminates the time consuming and costly dismounting of shafts and pillow blocks to remove worn sprockets all that s required is a wrench QRS Split Thermoplastic Sprocket Advantages: Lightweight Service Temp. to 300 F Low Temp. Toughness Excellent Resistance to Oils, Grease, Soaps, and Detergents Outstanding Abrasion and Impact Resistance Available with solid and grooved face and furnished with rust resistant plated steel bolts and nuts Split (plated carbon steel and stainless) Guide Rings available, if necessary, for easy assembly Proudly made in the U.S.A. PAT. # 4,964,842 Call your Martin Distributor A-7
3 Split Steel and Thermoplastic Stock Bore Series 815 Sprockets Split Steel Number Actual Effective Diameter Diameter Stock Maximun QRS815A (129.26) (130.0) (19.1) (38.1) (2.27) QRS815A (141.22) (142.0) (19.1) (38.1) (2.54) QRS815A (153.21) (154.2) (19.1) (38.1) (3.0) QRS815A (165.20) (166.6) (19.1) (38.1) (3.54) NOTE: Supplied with standard 90 to split. Solid Face Series 815 Sprockets Split Thermoplastic QRS815A21P QRS815A23P QRS815A25P QRS815A27P Thermoplastic temperature operating range 20 F to +300 F NOTE: Supplied with plated 90 to split (129.26) (130.0) (19.1) (38.1) (.43) (141.22) (142.0) (19.1) (38.1) (.45) (153.21) (154.2) (19.1) (38.1) (.50) (165.20) (166.6) (19.1) (38.1) (.57) PAT. #4,964,842 Series 820 Sprockets Split Steel QRS820A (129.26) (130.0) (19.1) (38.1) (2.27) QRS820A (141.22) (142.0) (19.1) (38.1) (2.54) QRS820A (153.21) (154.2) (19.1) (38.1) (3.0) QRS820A (165.20) (166.6) (19.1) (38.1) (3.54) NOTE: Supplied with standard 90 to split. Series 820 Sprockets Split Thermoplastic QRS820A21P (129.26) (130.0) (19.1) (38.1) (.43) QRS820A23P (141.22) (142.0) (19.1) (38.1) (.45) QRS820A25P (153.21) (154.2) (19.1) (38.1) (.50) QRS820A27P (165.20) (166.6) (19.1) (38.1) (.57) NOTE: Supplied with plated 90 to split. For Guide Ring Specifications See page A-12 Grooved Face A-8
4 800 Series SPECIALTY Series 821 Sprockets Semi-Steel Stock Bore 821A (129.26) (130.1) (25.4) (44.5) (3.0) 821A (141.22) (142.0) (25.4) (44.5) (3.2) 821A (153.21) (154.2) (25.4) (44.5) (3.3) 821A (165.20) (166.6) (25.4) (44.5) (3.4) 821A (177.24) (179.1) (25.4) (44.5) (3.6) NOTE: 821 Series also runs with 815 H chain Series 880 Sprockets Semi-Steel Stock Bore 880C (111.40) (110.0) (19.1) (44.5) (1.3) 880C (123.29) (122.4) (19.1) (31.8) (1.4) 880C (135.22) (134.9) (19.1) (44.5) (1.5) 880C (147.22) (147.3) (19.1) (44.5) (1.6) 880C (182.26) (184.4) (19.1) (44.5) (1.9) NOTE: Block Body Other sizes are arm body 5 8 Series 881 Sprockets Semi-Steel Stock Bore 881C C C NOTE: (129.26) (130.05) (19.1) (44.5) (1.9) (141.22) (141.99) (19.1) (44.5) (2.1) (153.21) (154.18) (19.1) (44.5) (2.3) A-9
5 800 Series Series 820 Sprockets Semi-Steel Stock Bore 820A13B A15B A17B A A A A21B A A A A A25B A A A A (81.99) (79.0) (19.1) (31.8) (1.1) (93.68) (92.2) (19.1) (31.8) (1.6) (105.49) (104.7) (19.1) (42.9) (2.1) (117.35) (117.1) (19.1) (31.8) (1.5) (123.29) (123.4) (19.1) (31.8) (1.7) (129.26) (130.0) (19.1) (44.5) (2.1) (129.26) (130.0) (19.1) (63.5) (3.3) (135.23) (135.9) (19.1) (44.5) (1.9) (141.22) (142.0) (19.1) (44.5) (2.4) (147.22) (148.1) (19.1) (44.5) (2.0) (153.21) (154.2) (19.1) (50.8) (2.4) (153.21) (154.2) (19.1) (81.0) (4.4) (165.20) (166.6) (19.1) (50.8) (2.8) (177.24) (179.1) (19.1) (50.8) (3.1) (189.28) (191.3) (19.1) (50.8) (3.1) (249.58) (252.2) (19.1) (64) (7.1) NOTE: Block Body Other sizes are arm body Max. bore shown is with Standard Keyway and Setscrew. 820 Series stocked grooved. (Guide ring holes in 21, 23, 25, and 27 tooth sizes can be provided upon request). Steel Series 820 Sprockets Semi-Steel Bored to Size Catalog Number 820BS19 1 (25.4) 820BS21 1 (25.4) 820BS (22.2) 1 (25.4) (28.6) (30.2) (31.8) 820BS25 1 (25.4) (30.2) (31.8) 820BS27 1 (25.4) Stock grooved without guide ring holes. All arm body. Inch/Metric Stock Finished Bores With Standard Keyway and Setscrew Cast A-10
6 800 Series SPECIALTY Series 815 Sprockets Semi-Steel Stock Bore 815A13B (81.99) (79.0) (19.1) (31.8) (1.1) 815A15B (93.68) (92.2) (19.1) (31.8) (1.6) 815A17B (105.49) (104.7) (19.1) (42.9) (2.1) 815A (117.35) (117.1) (19.1) (31.8) (1.5) 815A (123.29) (123.4) (19.1) (31.8) (1.7) 815A (129.26) (130.0) (19.1) (44.5) (2.1) 815A21B (129.26) (130.0) (19.1) (63.5) (3.3) 815A (135.23) (135.9) (19.1) (44.5) (1.9) 815A (141.22) (142.0) (19.1) (44.5) (2.4) 815A (147.22) (148.1) (19.1) (44.5) (2.0) 815A (153.21) (154.2) (19.1) (50.8) (2.4) 815A25B (153.21) (154.2) (19.1) (81.0) (4.4) 815A (165.20) (166.6) (19.1) (50.8) (2.8) 815A (177.24) (179.1) (19.1) (50.8) (3.1) 815A (189.28) (191.3) (19.1) (50.8) (3.1) 815A (249.58) (252.2) (19.1) (64) (7.1) NOTE: Block Body Other sizes are arm body Max. bore shown is with Standard Keyway and Setscrew. 815 Series stocked not grooved, with guide ring holes. Series 815 Sprockets Semi-Steel Bored to Size Catalog Inch/Metric Number Stock Finished Bores With Standard Keyway and Setscrew 815BS19 1 (25.4) 815BS21 1 (25.4) 815BS (22.2) 1 (25.4) (28.6) (30.2) (31.8) 815BS25 1 (25.4) (30.2) (31.8) 815BS27 1 (25.4) Stock not grooved but with guide ring holes. All arm body. A-11
7 Series 800 Series 882 Sprockets Semi-Steel Stock Bore 882C C C C NOTE: Arm Body Other sizes are block body (111.40) (112.5) (19.1) (44.5) (1.8) (123.29) (125.0) (19.1) (44.5) (1.9) (135.25) (137.40) (19.1) (44.5) (2.1) (147.21) (149.90) (19.1) (44.5) (2.2) D.E. 815 Guide Rings Steel and Stainless Steel Thick Catalog Inches Inches Number (mm) (mm) Per Set GR GR15-16SS (91.9) (1.6) (.10) GR GR17-18SS (104.4) (1.6) (.120) GR GR19-20SS (116.3) (3.2) (.17) GR GR21-22SS (129.3) (3.2) (.20) GR GR23-24SS (141.2) (3.2) (.21) GR GR25-26SS (153.4) (3.2) (.21) GR GR27-28SS (165.9) (3.2) (.24) GR GR29-30SS (178.3) (3.2) (.25) GR GR31-32SS (190.5) (3.2) (.30) GR GR41-42SS (251.2) (3.2) (.42) Carbon Steel Stainless Steel 7 8 A-12
SPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...
Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................
Index SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
ROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
Rex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
FOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
FBN/FBK Chain Couplings
s FBN/FBK Order Example FBN 4012 D20 FBK 4012 D20 (for New JIS Key) (for Old JIS Key) Semi-F supported FBN5014D20 (inner diameter D20) FBN5014D30 (inner diameter D30) Type Model Shaft Hole Diameter Conveyor
PLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
Rex 881 TableTop Chain Side-flexing
Prefix S SS 881 Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/4 3.25 82. 6 18.00 7. 2 2.00 2.97 4-1/2 4. 1 3 00 609. 6 2. 3.71 7-1/2 7. 19 5 00 609. 6 3.70 5.49 Cha Carbon Staless
7200/7300 Series Bottom Mount Drive Package for Standard Load Parallel Shaft Sanitary Gearmotors
7200/7300 Series Bottom Mount Drive Package for Standard Load Parallel Shaft Sanitary Gearmotors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975
TORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
Engineering Class Sprockets
Engineering Class Sprockets 28 Engineering Class Sprockets Renold Jeffrey replaceable sprockets and traction wheels are specially designed for the realities of high-stress, heavy-duty service. A variety
Forged Chains & Sprockets
Forged Chains & Sprockets Forged Link Standard Series MN Grade Standard in stock MINIMUM ULTIMATE STRENGTH LB CHAIN No. PITCH T C S F R OD MN CN C CD S 420 JKF102Z 4 (102) 0.94 1.42 0.31 0.39 0.25 0.56
Download the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
Can-Am. Mill Chain Sprockets. Can-Am Products visit us at
Can-Am Mill Chain Sprockets Can-Am Products visit us at www.can-amchains.com CAN-AM CHAINS CANADA CAN-AM CHAINS USA The origin of CAN-AM chain dates back to 1966, and a small machine shop in Richmond,
Gates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
Rexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
Think you ve reached all the low hanging fruit for energy efficiency in your facility?
Think you ve reached all the low hanging fruit for energy efficiency in your facility? Gearbelt Drives are offered in five stock pitches to handle a wide range of loads, speeds and applications. HPT Drives
Rexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
Torque Limiter Design Features
In response to industry needs, Morse introduced the first spring loaded, friction type protective device in 1949, called the Morse torque limiter. s the originator of the torque limiter, Morse has gained
Centrifugal Discharge Elevator. Product Catalog
Product Catalog Centrifugal Discharge Bucket Elevator Bucket Elevators are ideal for elevating a variety of bulk materials economically, efficiently and reliably. The two main type of Bucket Elevators
SPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
LOR Series Trig-O-Matic Lite Overload Release Clutch
LOR Series Trig-O-Matic Lite Overload Release Clutch P-3029-BG LOR Series Installation and Operation An Altra Industrial Motion Company Contents I. Introduction A. Operating Principle... 3 B. Torque Adjustment...
SPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
Boston Gear LOR Series
Boston Gear LOR Series Trig-O-Matic Lite Overload Release Clutch Installation and Maintenance Instructions Doc. No. LOR Series Trig-O-Matic Lite www.bostongear.com LOR SERIES TRIG-O-MATIC LITE OVERLOAD
SKF Flex Coupling Installation Instructions
SKF Flex Coupling Installation Instructions The performance of the coupling depends largely upon how you install and maintain. 1. Thoroughly clean all components, paying particular attention to the removal
At Dyno we make the world of business go round. Up and down. And side to side.
Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 7200/7300 Series Top Mount Drive Package for Heavy Load 90 Sanitary Gearmotors Table of Contents Warnings General Safety.................... 2 Introduction................................
MATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
Maryland Metrics: How to order: Please prefix the P.T.I. part number or description with R305- example: R305-RAK201-8A Table of Contents.
Table of Contents Product.... Inside Cover General Overview.....2 Mounted Ball Bearings - Metric / Inch Ball Bearing Selection & Interchange......8 Pillow Blocks......14 Tapped Base......36 4-Bolt Flange
Forged Chains & Sprockets
Forged Chains & Sprockets Telephone: 309-698-9250 5 a CROMANT chain company FORGED CHAINS & SPROCKETS Cobalt Chains forged alloy fork link chain provides an excellent solution for the rigors of heavy duty
Tsubaki POWER-LOCK Keyless Shaft Locking Solutions
Tsubaki POWER-LOCK Keyless Shaft Locking Solutions Performance Under Pressure Tsubaki's extensive POWER-LOCK portfolio offers a simple and cost effective solution to problems associated with keyed or machined
Boston Gear ORC-S Series Trig-O-Matic Overload Release Clutches
Boston Gear ORC-S Series Trig-O-Matic Overload Release Clutches P-3003-BG Installation & Operation Instructions ORC-S Series Contents I. Introduction A. Operating Principle...2 B. Resetting Instructions...3
Industrial Chain and Conveying
Industrial Chain List Price Book Industrial Chain and Conveying Chain, Idlers, Engineered Chain, Conveying Equipment 102-606 October 1, 2017 Supersedes January 1, 2017 TABLE OF CONTENTS Chain Lengths and
Features / Benefits... PT5-2
CONTENTS Features / Benefits................................................... PT5-2 PT Component Specification........................................................ PT5-3 How To Order.......................................................
Plastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
7400 Series End Drive Conveyors
700 Series End Drive Conveyors Installation, Maintenance and Parts Manual Flat Belt Conveyor Cleated Belt Conveyor DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866
POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
Boston Gear ORC Series
Boston Gear ORC Series Trig-O-Matic Overload Release Clutches Installation and Maintenance Instructions Doc. No. ORC Series Model S www.bostongear.com ORC SERIES TRIG-O-MATIC OVERLOAD RELEASE CLUTCHES
Complete Component Catalog
Complete Component Catalog Valuepart for the Best in Quality Valuepart is committed to providing customers with the Highest Quality products available in the industry. Rigid Quality and Application standards
ATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
Super-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
Bringing Component Parts Together
Bringing Component Parts Together About Concentric International Concentric International connects retail, wholesale and original equipment manufacturers (OEM) with the value of global sourcing for products
Slide-Rite & Slide-Rite CR Gearbox
Gearboxes Gearbox and CR Gearbox Pages 2 through 7 Float-A-Shaft (FAS) Gearbox Pages 8 through 24 Visit www.tolomatic.com for the latest updates, CAD files and ordering. GEARBOXES www.tolomatic.com 1 GEARBOXES
Roller Selection Flowchart
Selection Selection Flowchart Solus offers a line of conveyor rollers and components which are engineered to provide totally maintenance free service. These rollers are quiet, need no lubrication, are
Set-up, Operation & Maintenance Manual
2100 Series Cleated Belt End Drive Conveyors Set-up, Operation & Maintenance Manual Conveyor with Bottom Mounted End Drive Conveyor with Top Mounted End Drive Conveyor with Side Mounted End Drive 851-183
Melling Oil Pump Helical Asymmetrical Steel Gears Improved Efficiency, Performance, and Durability. Small Block Engines. Cars, Trucks & Vans
S H A R K T O O T H T E C H N O L O G Y GM Cars, Trucks & Vans 262-400 Small Block Engines Melling Oil Pump Helical Asymmetrical Steel Gears Improved Efficiency, Performance, and Durability Multi-patented
MECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 6100 Series Sanitary End Drive Conveyors Table of Contents Warnings General Safety......................... 2 Introduction.................................... 2
Roller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
CONVEYOR COMPONENTS: Baldor Dodge ISAF HYD & ISNX Bearings for Conveyor Pulleys
CONVEYOR COMPONENTS: Baldor Dodge ISAF HYD & ISNX Bearings for Conveyor Pulleys CO Engineering Conveyor Components November 19, 2012 Baldor Dodge has a bearing product, ISAF HYD & ISNX that provides a
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
ATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
INSTALLATION AND OPERATION
WARNING: Because of the possible danger to persons(s) or property from accidents which may result from the improper use of products, it is important that correct procedures be followed. Products must be
Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT FRAME 5" x 5" Mounted Toolbar The 5x5 mounted rigid toolbar frame comes in the following
360 Tapping Machine. Description
Sizes: 2- to 6-inch Model 360B Bulletin No: 1000.004.08 Version: 06.2018 Cross Indexing No: n/a Supersedes: 1000.004.07 (12.2017) Description Tapping machines are used for making connections to pipelines,
Maintenance Instructions 100, 150, 200 & 400 Series Water & Waste Water Safety Element Torque Limiters with Externally Adjustable Modules
World Leader in Modular Torque Limiters PROTECTING EQUIPMENT& MACHINERYYEARSInstallation and Maintenance Instructions 00, 50, 200 & 400 Series Water & Waste Water Safety Element Torque Limiters with Externally
COUPLERS 5. Fax: +44 (0)
COUPLERS Fax: +44 (0)1992 09890 3 COMPOSITE JAW COUPLERS (SERIES FS) L1 2.0 mm Max L2 2.0 mm Max L3 Bore B s 032-037 s 02-08 max features Low mass Freedom from corrosion Good damping properties Low cost
Plastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
KTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
U.S. TSUBAKI DRIVE CHAINS
DRIVE CHAINS Contents Page ANSI RS ROLLER CHAIN A- ~ A-4 INTRODUCTION A- ~ A-5 RS5 THROUGH RS4 A-6 ~ A-9 HEAVY SERIES A- RS DOUBLE PITCH ROLLER CHAINS A- SELECTION AND ENGINEERING INFORMATION A- ~ A-4
PowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
V-BELT DRIVES AND BEARINGS
V-BELT DRIVES AND BEARINGS The first name in air handling products Product types...3 Product features V-Belts... 4 B5V sheaves... 4 Variable speed sheaves... 5 Bushings... 5 Bearings... 5 Commercial-duty
H1600 Mechanical Overload Clutches HOR Series
H1600 Mechanical Overload es HOR Series Section Contents FEATURES... 36 OPERATING PRINCIPLES... 36 SELECTION... 37 HOW TO ORER... 37 RATINGS AN IMENSIONS... 38 MOUNTING HOLE PATTERNS... 42 GENERAL INFORMATION...
Rex 1701 Multiflex Chain
1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate
360 Tapping Machine. Description. Features. The basic machine includes:
Sizes: 2- to 6-inch Model 360A and 360B Bulletin No: 1000.004.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.004.06 (05.2017) Description Tapping machines are used for making connections to
Urethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
Timing Chain: Service and Repair With 2 Piece Tensioner (TSB A) Precaution. Removal This article has been updated with bulletin No A.
1997 Chevrolet Cavalier L4-144 2.4L DOHC VIN T SFI Page 1 Timing Chain: Service and Repair With 2 Piece Tensioner (TSB 67-61-22A) Precaution Bulletin No.: 67-61-22A Date: July, 1998 TIMING CHAIN TENSIONER
KENNEDY VALVE RESILIENT WEDGE GATE VALVE MAINTENANCE MANUAL
KENNEDY VALVE Division of McWane, Inc. 1021 East Water Street P.O. Box 931 Elmira, New York 14902-0931 Telephone (607) 734-2211 Fax (607) 734-1003 KENNEDY VALVE RESILIENT WEDGE GATE VALVE MAINTENANCE MANUAL
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 4100 Series End Drive Table of Contents Warnings General Safety........................ 2 Introduction.................................... 2 Product Description..............................
Camshaft. vw-wi://rl/v.en-us.k wi:: xml?xsl=3. Special tools and workshop equipment required
Page 1 of 9 Camshaft Special tools and workshop equipment required Diesel Injection Pump Locking Pin -3359- Counterhold - Camshaft Gear -T10051- Puller - Camshaft Sprocket -T10052- Camshaft Fitting Tool
Serving Industrial Markets Since 1961:
Full Line Brochure Clutches Brakes Clutch Brakes Caliper Brakes & Rotors Torque Limiters Air Shaft Seals Sheaves Serving Industrial Markets Since 1961: Food Processing & Packaging Material Handling Printing
Rex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
Boston Gear ORC-S Series Trig-O-Matic Overload Release Clutches
Boston Gear ORC-S Series Trig-O-Matic Overload Release Clutches Installation and Operation ORC-S Series a division of Altra Industrial Motion Contents I. Introduction A. Operating Principle.................2
MGA Twin Cam Engine Assembly.
MGA Twin Cam Engine Assembly. The following article is a collection of notes of things to be observed in the assembling of MGA Twin Cam engines. To be read in conjunction with the Workshop Manual. It does
OWI 35C-7/ 35C-7H PIPE SPINNER
OWI 35C-7/ 35C-7H PIPE SPINNER OIL WORKS, INC.. manufactures the OWI 35C-7 pipe spinner in Pneumatic and Hydraulic Versions at our facility in Odessa, TX. We offer new and rebuilt units, and stock a full
Products Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
4100 Series End Drive Conveyors
4100 Series End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
SERVICE MANUAL for. Engine-to-Generator. Part Number used on. John Deere Engine Driven Aircraft Ground Power Single-Bearing Generator Sets
TO-216 SERVICE MANUAL for Engine-to-Generator FLEXIBLE COUPLING Part Number 181267 used on John Deere Engine Driven Aircraft Ground Power Single-Bearing Generator Sets manufactured by HOBART BROTHERS COMPANY
LONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
Installation and Maintenance Instructions Falk Wrapflex (Page 1 of 7) 1. General Information. 2. Safety and Advice Hints DANGER! Type 10R.
(Page 1 of 7) This is the Original Document in English Language Type 10R Type 31R Type 35R Figure 1 - Wrapflex coupling range 1. General Information 1.1. Falk Wrapflex Couplings are designed to provide
7400 Series Nose Bar Conveyors
700 Series Nose Bar Conveyors Installation, Maintenance and Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866 TEL: 6-67-7600 Hartland, WI 509-000
Synchronous Belt Failure Analysis Guide
Synchronous Belt Failure Analysis Guide Contents Part 1: Common Causes of Belt Failure Normal Belt Wear and Failure Belt Crimp Failures Shock Load Part 2: Improper Belt Installation Tension Introduction
AT Clutch Major Service Sizes 25, 55, 115
P-1404 819-0324 AT Clutch Major Service Sizes 25, 55, 115 Installation Instructions Contents Introduction............................ 2 Warranty....................... back cover Failure to follow these
Boston Gear ORC-F Series Trig-O-Matic
Boston Gear ORC-F Series Trig-O-Matic P-3002-BG Installation and Operation ORC-F Series Contents I. Introduction A. Operating Principle... 2 B. Resetting Instructions... 3 C. Torque Adjustment... 3 Il.
PIÈCES DÉTACHÉES. Chasse-neige. Révision 10/
PIÈCES DÉTACHÉES Chasse-neige 555 860 Révision 10/2004 Y v a n B é a l - 2 1, a v. d e l A g r i c u l t u r e - B. P. 1 6 Z. I. d u B r é z e t - 6 3 0 1 4 C l e r m o n t - F e r r a n d C e d e x 2
Conveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
TIMING CHAINS & BELTS
TIMING CHAINS & BELTS * PLEASE READ THIS FIRST * TIMING CHAINS Timing chains will stretch during operation. Limits are placed upon amount of stretch before replacement is required. Timing chain stretch
Gear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
Boston Gear ORC-F Series Trig-O-Matic Overload Release Clutches
Boston Gear ORC-F Series Trig-O-Matic Overload Release Clutches P-3002-BG Installation and Operation ORC-F Series a division of Altra Industrial Motion 2 Contents I. Introduction A. Operating Principle..............2
Profile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
Chain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152