Rex 881 TableTop Chain Side-flexing
|
|
- Isabella Booth
- 5 years ago
- Views:
Transcription
1 Prefix S SS 881 Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/ / / Cha Carbon Staless Cha is shown Carbon (S) material. Standard materials are highlighted. other materials are available on a made-to-order basis. Cha strength is listed at room temperature. NR = Not Recoended. Regulatory Information The Food and Drug dmistration (FD) accepts certa materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, Rex and TableTop are trademarks of Rexnord Industries, Inc. rights reserved. DIRECTION OF TRVEL M. Side-flex M. Back-flex 1. (38.1 ) Cha Pitch 1. (38.1 ) Cha P Diameter 25 (6.4 ) Cha Drawg Cha Bottom 43 (19 ) Straight 1.75 (44.5 ) Height Over Centerle 25 (6.4 ) 12 (3.0 ) Curve 1.63 (41.4 ) Overall 1.67 (42.4 ) vailable s Temperature Cha Standard Fahrenheit Celsius FD Strength P pproval m m N Carbon NR NR 2,780 - Staless ,780! dditional Notes 1. Stocked 80 pitch, 10 ft (3.048 m) length strands. 2. Staless steel is austenitic. Rex 881 Series TableTop Cha Product Portfolio TT Rex 881 TableTop Cha Side-flexg
2 Side-flexg Rex 881 TB TableTop Cha Prefix S SS 881 TB Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/ / / TT Cha Carbon Staless Cha is shown Carbon (S) material. Standard materials are highlighted. other materials are available on a made-to-order basis. Cha strength is listed at room temperature. NR = Not Recoended. Regulatory Information The Food and Drug dmistration (FD) accepts certa materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, Rex and TableTop are trademarks of Rexnord Industries, Inc. rights reserved. DIRECTION OF TRVEL M. Side-flex M. Back-flex 1. (38.1 ) Cha P Diameter 25 (6.4 ) Cha Pitch 1. (38.1 ) Cha Drawg TB Bottom 64 (16.3 ) Straight 1.81 (46.0 ) 12 (3.0 ) Curve 1.75 (44.5 ) Height Over Centerle 25 (6.4 ) Overall 1.67 (42.4 ) Over TBs 2.19 (55.6 ) TB Top 52 (13.2 ) vailable s Temperature Cha Standard Fahrenheit Celsius FD Strength P pproval m m N Carbon NR NR 2,780 - Staless ,780! dditional Notes 1. Stocked 80 pitch, 10 ft (3.048 m) length strands. 2. Staless steel is austenitic. Rex 881 Series TableTop Cha Product Portfolio
3 Prefix SS 881 TB G Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-5/ Cha Staless Cha is shown Staless (SS) material. Standard materials are highlighted. other materials are available on a made-to-order basis. Cha strength is listed at room temperature. NR = Not Recoended. Regulatory Information The Food and Drug dmistration (FD) accepts certa materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, Rex and TableTop are trademarks of Rexnord Industries, Inc. rights reserved. U.S. Patents: , , DIRECTION OF TRVEL M. Side-flex Cha P Diameter 25 (6.4 ) TB Bottom 63 (16.0 ) Cha Pitch 1. (38.1 ) Cha Drawg Straight 1.81 (46.0 ) Height Over Centerle 1.44 (36.6 ) Curve 1.75 (44.5 ) Inside Retaer 3.39 (86.1 ) Overall 1.67 (42.4 ) Over TBs 2.19 (55.6 ) TB Top 52 (13.2 ) Retaer Bottom to Plate Top 38 (9.7 ) vailable s Temperature Cha Standard Fahrenheit Celsius FD Strength P pproval m m N Staless ,780! dditional Notes 1. Stocked 80 pitch, 10 ft (3.048 m) length strands. 2. Staless steel is austenitic. 3. Can be assembled with J or D style gripper attachments; see accessories section for more formation. Rex 881 Series TableTop Cha Product Portfolio TT Rex 881 TB TableTop Cha with Gripper Retaers Side-flexg
4 881 Semi- Sprocket NS881 Thermoplastic Split Sprocket 1.25 (31.8 ) Face 1.25 (31.8 ) Face Length thru Bore 1.63 (41.3 ) Bore Diameter Pitch Diameter Outside Diameter Length thru Bore 2.00 (58 ) Bore Diameter Pitch Diameter Outside Diameter Rex 881 Series TableTop Cha Compatible Sprockets 881 Semi- Sprocket Information Bore Diameter (Shaft-Ready) Pitch Outside Bore Diameter (Round) pproximate Round Square of Teeth Diameter Diameter Weight actual effect m m m m m m / / / / / / / / / Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. NS881 Thermoplastic Split Sprocket Information Bore Diameter (Shaft-Ready) Pitch Outside Bore Diameter (Idler) pproximate Round Square of Teeth Diameter Diameter Weight actual effect m m m m m m / 1 1-5/ / 1 1-5/ / 1 1-5/ Shaft-ready round bores are shipped with keyway and setscrews. Metric shaft-ready round bores are shipped with metric hardware, but without setscrews. Idler bores are designed to sp freely on the shaft without keyway or setscrews. TT Rex 881 Series TableTop Cha Product Portfolio
5 Corner (One Piece) Corner Corner ngle 90 ngle 90 B B Sgle Lane (1) Multiple Lane (2) 2=1+(N-1) * (e) Guide 1.6 (41 ) Lane Spacg (e) Height 1.0 (25 ) Section - Sgle Lane Guide Depth 7 (18 ) Corner track number supplied as one 90 side and one 90 outside track, which can be used as either carry or return. one piece corner tracks are available on a made-to-order basis. For 881 (bevel) cha only. Do not use with 881 TB chas. Section B - B Multiple Lane Cha Corner Sgle Lane Multiple Lane Lane Spacg pproximate Corner (1) (2) ( e) of Lanes Weight (N) KSU KSU KSU KSU / KSU KSU KSU KSU KSU KSU / KSU KSU KSU KSU / KSU KSU Rex 881 Series TableTop Cha ccessories Rex 881 Series TableTop Cha Product Portfolio TT
6 Corner (One Piece) Corner Corner ngle 90 ngle 90 B B Rex 881 Series TableTop Cha ccessories Rim 4 (10 ) Height 1.0 (25 ) Sgle Lane (1) TB Guide 2.8 (70 ) Section - Sgle Lane Guide 1.8 ( ) Guide Depth 7 (18 ) Corner track number supplied as one 90 side and one 90 outside track, which can be used as either carry or return. one piece corner tracks are available on a made-to-order basis. For 881 TB cha only. Do not use with 881 (bevel) chas. Multiple Lane (2) 2=1+(N-1) * (e) Lane Spacg (e) Section B - B Multiple Lane Cha Corner Sgle Lane Multiple Lane Lane Spacg pproximate Corner (1) (2) ( e) of Lanes Weight (N) KTU KTU KTU KTU / KTU KTU KTU KTU KTU KTU / KTU KTU KTU KTU / KTU KTU TT Rex 881 Series TableTop Cha Product Portfolio
7 Corner (Two Piece) Outside Outside ngle 90 Nomal Corner Inside Inside View - Bevel Design Bevel ngle 8.0 Corner track number supplied as one 90 side and one 90 outside track, which can be used as either carry or return. View - TB Design ccomodates Top Nomal Corner Inside Outside pproximate Corner Plate Weight Bevel Design N18B3 3-1/ N24B U18B3 3-1/ U24B TB Design N18R3 3-1/ N24R U18R3 3-1/ U24R Nylatron is a registered trademark of Quadrant Engeerg Plastics Products. Outside Outside Gap Between Each 1 (3 ) Corner (Four Piece) Nomal Corner Inside View - Bevel Design Bevel ngle 8.0 Rex 881 Series TableTop Cha ccessories ngle.0 (Each ) Inside View - TB Design 30 (762 ) radius furnished two segments to make one 90 unit. Corner track number supplied as two side tracks and two outside tracks, which can be used as either carry or return. ccomodates Top Nomal Corner Inside Outside pproximate Corner Plate Weight Bevel Design N30B U30B TB Design N30R U30R Nylatron is a registered trademark of Quadrant Engeerg Plastics Products. Rex 881 Series TableTop Cha Product Portfolio TT
8 Rex 881 Series TableTop Cha ccessories Gripper ttachments "J" Style Gripper ttachment Part Style D Neoprene D Neoprene D Neoprene D Neoprene D (Thick Wall) Neoprene D EPDM D EPDM D EPDM J Neoprene J Neoprene J Neoprene J EPDM J EPDM Hardness (Shore ) "D" Style Gripper ttachment TT Rex 881 Series TableTop Cha Product Portfolio
Rex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
More informationRex 1701 Multiflex Chain
1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate
More informationRex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
More informationRexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationMartin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More informationIndustrial Chain and Conveying
Industrial Chain List Price Book Industrial Chain and Conveying Chain, Idlers, Engineered Chain, Conveying Equipment 102-606 October 1, 2017 Supersedes January 1, 2017 TABLE OF CONTENTS Chain Lengths and
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More information7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
More informationPRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More information50 years of Reliable Field History
Coupling Comments The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 10 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationFlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains
FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of
More informationROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
More informationMORFLEX COUPLINGS Double MORFLEX Series CC Hub and Block Assemblies Round steel flanges
MORFLEX COUPLINGS The MORFLEX coupling should be installed where considerable dimensional misalignment may result, or is expected. It also cushions shock loads and absorbs vibration. The MORFLEX coupling
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationFOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationCONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP
CONVEYOR INSTALLATION MANUAL I VERSION 1 Rexnord TableTop and MatTop Chains Rexnord Roller Upgrade System REXNORD FLATTOP Rexnord Industries, LLC For more than one hundred years, Rexnord has provided superior
More informationSideGrip Chain. Maintenance Manual
SideGrip Chain Maintenance Manual Rexnord, Rex, TableTop, MatTop, Platinum Series, PS, and HP are trademarks of Rexnord Industries, Inc. All rights reserved. Nylatron is a registered trademark of Quadrant
More informationTableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
More informationContents Section E. Section E Contents. Series
Contents Section E Vacuum um Pumps & Blowers Series ower Tank Accessories Section E.1 ASME Code Float Level Indicators... E.1.2 Non-Code Float Level Indicators... E.1.4 Sight Eye Assemblies and Parts...
More informationVIKING HEAVY DUTY PUMPS SERIES 4197 STAINLESS STEEL FEATURES
VIKING HEAVY DUTY PUMPS FEATURES Section 64 Page 64. s Cutaway View 0--0 GPM Sizes (2-4.5-7 m³/hr) s Cutaway View 5-50-75 GPM Sizes (8--7 m³/hr) Pressure Range Temperature Range Viscosity Range 0 PSI (4
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationOne Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
More informationButterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
More informationRexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
More informationGates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
More informationSPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...
Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationRexnord TableTop Chains New 1873 Gripper Chains K325 - K450
Rexnord TableTop hains New 1873 hains K325 - K450 Rexnord FlatTop introduces new version of gripper chains with of (82,5) and (114,3). These new products are the answer to the need for more compact design
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More informationDOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationForged Chains & Sprockets
Forged Chains & Sprockets Forged Link Standard Series MN Grade Standard in stock MINIMUM ULTIMATE STRENGTH LB CHAIN No. PITCH T C S F R OD MN CN C CD S 420 JKF102Z 4 (102) 0.94 1.42 0.31 0.39 0.25 0.56
More informationDTS -C. Conveyor Design Manual. Comb System 4707/
DTS -C Comb System Conveyor Design Manual 4707/5997-7705 Rexnord, Rex, TableTop, MatTop and DTS-C are trademarks of Rexnord Industries, Inc. All rights reserved. Table of Contents Introduction / Safety.................................
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationADJUSTABLE PITCH SERIES
ADJUSTABE PITCH SERIES FEATURES: Stock Sizes - 1 and 2 grooves up to 25 HP Both 1 and 2 groove adjustable sheaves permit variations of as much as 30% in speed when used with a fixed diameter sheave Available
More informationExtra Heavy Duty Modular Belts 2508 & 2630 Series
Extra Heavy Duty Modular Belts 2508 & 2630 Series Applications Dual Strand Test Tunnel Sgle Strand Car Wash Individual Pushers Mount Easily On Belt Surface Pictures by courtesy of Hohmeier Anlagenbau GmbH
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationRigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationRaised Face. Groove/Ring Number. Face Diameter min in mm
http://www.yaang.com e-mail: sales@yaang.com BS 393 : 1960 British Standard BS 393 : 1960 - Carbon Steel Pipe s (over 4 ches nomal size) for the Petroleum Industry, covers 1 lb to 600 lb weld neck and
More informationTAPER-LOCK BUSHINGS. Bushing Bore and Keyseat Information Inches. Bushing Bore and Keyseat Information Metric. Installation Instructions
TAPER-LOCK BUSHINGS Bushing Bore and Keyseat Information Inches Bushing Bore and Keyseat Information Metric Installation Instructions Taper-Lock is a trademark of Baldor Electric Company P-1954-TBW 11/17...
More information3.25, 4.5, 7.5 Tabletop Conveyor Specifications
3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder
More informationFBN/FBK Chain Couplings
s FBN/FBK Order Example FBN 4012 D20 FBK 4012 D20 (for New JIS Key) (for Old JIS Key) Semi-F supported FBN5014D20 (inner diameter D20) FBN5014D30 (inner diameter D30) Type Model Shaft Hole Diameter Conveyor
More informationPA PIPE ADAPTERS. Issue Date: 02/08/2018
PA PIPE ADAPTERS Issue Date: 02/08/2018 2 Pipe Adapter 0º MT-PA-06-06-02-00 6 Plate to 2 Pipe 90º MT-PA-06-06-02-90 12 Plate to 2 Pipe 90º MT-PA-12-12-02-90 6 Plate to 1.5 Pipe 90º MT-PA-06-06-1.5-90 12
More informationSPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49
More informationForged Chains & Sprockets
Forged Chains & Sprockets Telephone: 309-698-9250 5 a CROMANT chain company FORGED CHAINS & SPROCKETS Cobalt Chains forged alloy fork link chain provides an excellent solution for the rigors of heavy duty
More informationSeries 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More informationTorque Limiter T-Series Overview. Autogard Torque Limiter T-Series
Torque imiter T-Series Overview Autogard Torque imiter T-Series Torque imiter T-Series For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design
More informationDRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS
ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationP (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE
Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:
More informationThink you ve reached all the low hanging fruit for energy efficiency in your facility?
Think you ve reached all the low hanging fruit for energy efficiency in your facility? Gearbelt Drives are offered in five stock pitches to handle a wide range of loads, speeds and applications. HPT Drives
More informationTitan Flow Control, Inc. Your pipeline to the future!
Titan Flow ontrol, Inc. Your pipele to the future! Series F 75 Wafer > ast Iron Series F 76 ug > uctile Iron esigned accordance with: MSS-S-67 & I 609 olor oded: Orange ody is M Seat lue ody is una-n Seat
More informationPOM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More informationHelical Hydraulic Rotary Actuators. we carry the load.
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationCan-Am. Mill Chain Sprockets. Can-Am Products visit us at
Can-Am Mill Chain Sprockets Can-Am Products visit us at www.can-amchains.com CAN-AM CHAINS CANADA CAN-AM CHAINS USA The origin of CAN-AM chain dates back to 1966, and a small machine shop in Richmond,
More informationSKF Flex Coupling Installation Instructions
SKF Flex Coupling Installation Instructions The performance of the coupling depends largely upon how you install and maintain. 1. Thoroughly clean all components, paying particular attention to the removal
More informationSPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
More informationTorque Limiter Design Features
In response to industry needs, Morse introduced the first spring loaded, friction type protective device in 1949, called the Morse torque limiter. s the originator of the torque limiter, Morse has gained
More informationPRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
More informationAt Dyno we make the world of business go round. Up and down. And side to side.
Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and
More informationTsubaki POWER-LOCK Keyless Shaft Locking Solutions
Tsubaki POWER-LOCK Keyless Shaft Locking Solutions Performance Under Pressure Tsubaki's extensive POWER-LOCK portfolio offers a simple and cost effective solution to problems associated with keyed or machined
More informationPROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationStock QD Bushings. DISMOUNTING 1. Remove pull-up bolts and screw them into TAPPED holes in sheave or sprocket and against flange of QD bushing to
Stock Q s MOUNTING ROCEURE Q USHINGS IMORTANT E SURE TAERE CONE SURFACES OF Q USHING AN INSIE OF SHEAVE OR SROCKET HU ARE RY AN FREE OF ALL FOREIGN SUSTANCES SUCH AS AINT, GREASE, OR IRT. STANAR MOUNTING
More informationTORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
More informationSPROCKETS for belts series
eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier
More informationIDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
More informationWedgeRock RP. Purpose Engineered, Quality Manufactured, Performance Tested. Planetary Gear Solutions. Features
WedgeRock RP Planetary Gear Solutions Features Compact Efficient drive train Patent pending self-locking technology Modular design accommodates multiple applications o Quarter Turn o Multi-turn o Rising
More informationChain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.
ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationVIKING HEAVY DUTY PUMPS
SERIES 495 STANDARD CONSTRUCTION Section 44 Page 44. Issue D FEATURES Range Temperature Range Viscosity Range 250 PSI (7 BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
More informationBoring Instructions for Steel Hubs
Couplings teel Hub Boring, Keyseting, etscrews & Puller Holes All Types (Pge 1 of 8) Figure 1 Figure 2 Figure 5 Boring Instructions for teel Hubs Refer to the pproprite selection guide for coupling hub
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More informationBenefits and Selection Table
105 Benefits and Selection Table D-M-E s Internal Latch Lock Allows Precision Control of Mold Plate Latchg Operation D-M-E s unique ternally-mounted latch lock mechanism adapts a number of mold base sizes
More information