EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.
|
|
- Kerry Morgan
- 5 years ago
- Views:
Transcription
1 EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D Hannover Phone , Fax Ref. no _1.2_S14
2 SERIES 14 l OVERVIEW Straight running belts l Pitch 12.7 (0.50 in) Belts for medium-duty food and non-food applications Side view scale 1:1 Available surface pattern and opening area 12.7 (0.5) S14-25 FLT Open (25 %), smooth surface Design characteristics Mini pitch belt with small transfer gap Robust design guarantees superior durability and high belt pull capacity Design for smooth run on 19 (0.75 in) nose bar Headless pin system making it easy to install and remove the belt for maintenance Closed, solid belt edge to prevent belt edge damages Basic data Pitch 12.7 (0.50 in) Belt width min (3.0 in) increments 12.7 (0.50 in) Hinge pins 3.4 (0.13 in) made of plastic Sprockets in different sizes with round or square sprocket bore Detail hinge pin Headless one-piece pin with unique retention system ensures trouble free installation and maintenance 165 Prolink Engineering Manual 11/17
3 SERIES 14 BELT TYPES Straight running belt Pitch 12.7 (0.50 in) S14-25 FLT 25 % Opening Flat top Open version (25 %) for excellent air circulation and drainage Smooth surface p h m Variant specific dimensions [ (in)] 2.7 (0.11) d pin hpin Winc Wmin 8.2 (0.32) Wmin Belt dimensions p d pin h m h pin h s W min W inc W tol Minimum flex radii1 Pitch Pin Ø Thickness [] Pin position [] Height [] min. [] Increment [] tolerance [%] r1 r2 r3 r4 r ± ± Available standard materials4 Nominal belt pull, Belt Pin Weight Temperature Certificates straight deviation Material Color Material Color [N/] [lb/ft] [kg/m 2 ] [lb/ft 2 ] [%] [ C] [ F] FDA2 EU3 POM BL PBT UC /90-49/194 POM WT PBT UC /90-49/194 PP BL PP WT /100 41/212 PP WT PP WT /100 41/212 PE BL PE WT /65-94/149 PE WT PE WT /65-94/149 BL (Blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 C; for temperature deviations please see Prolink manual chapter 4.4 Temperature influence. All imperial dimensions (es) are rounded off. 1 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on hold down shoe, r5 = back flex on roller 2 Complies with FDA 21 CFR 3 Complies with (EU) 10/11 and (EC) 1935/04 regulations regarding the raw materials used and the migration thresholds 4 More materials and colors on request 166 Prolink Engineering Manual 11/17
4 SERIES 14 SPROCKETS Straight running belt Pitch 12.7 (0.50 in) A S14 SPR Sprockets B B B-B D0 Wspr Main dimensions Sprocket size (Number of teeth) Wspr D0 Amax Amin Z12 Z15 Z19 Z24 Z28 Z Shaft bores ( = Round, = Square) / / Material: PA, Color: LG LG (Light gray) All measurements and tolerances apply at 21 C; for temperature deviations please see Prolink manual chapter 4.4 Temperature influence. All imperial dimensions (es) are rounded off. 167 Prolink Engineering Manual 11/17
5 Legend ➀ Series ➃ Type ➅ Material ➆ Color* S1 S14 ➁ Open area/sprocket size Percentage open area Format: xx E.g. = % For sprockets: number of teeth Format: Z xx E.g. Z12 = 12 teeth ➂ Surface pattern BSL Base module for slider CTP Cone top FLT Flat top (smooth) FRT(X) Friction top (Design X) FRT-OG FRT without High Grip insert GRT Grid top LRB Lateral rib MOD Modified module shape NCL No cling NPY Inverted pyramid NSK Non skid NTP Nub top (round studs) RAT Radius top RTP Roller top RRB Raised rib SRS Slip-resistant surface A90 CM SML SMR SMU UM PMC PMU PMU lxx CLP IDL RI SG PIN FPL SLI SPR RTR TPL TPR CW CCW Angle 90 to conveying direction Center module Side module, left Side module, right Side module, universal/both sides Universal module Profile module center Profile module universal Profile module universal with indent xx = indent in Clip Idler High Grip insert Module with sideguard Coupling rod Finger plate Slider Sprocket Retaining ring Turning panel, left Turning panel, right Clockwise Counterclockwise ➄ Style BT Bearing tap G Guided RG Reversed guided SG Side guard ST Strong (S5) DR Double row sprocket SP Split sprocket F1, F2, F3 Collapse factor modules PA Polyamide PA-HT Polyamide high temperature PBT Polybutylenterephthalate PE Polyethylene PE-MD PE metal detectable POM Polyoxymethylene (Polyacetal) POM-CR POM cut resistant POM-HC POM highly conductive POM-MD POM metal detectable PP Polypropylene Self-extinguishing PXX-HC highly conductive material POM-PE POM side modules + PE center modules POM- PP R1 R2 R3 R4 R5 R6 R7 R8 SER SS TPC1 HA HW POM side modules + PP center modules TPE 80 Shore A, PP EPDM 80 Shore A, vulcanized TPE 70 Shore A, PP TPE 86 Shore A, PP TPE 52 Shore A, PP TPE 63 Shore A, POM TPE 50 Shore A, PP TPE 55 Shore A, PE Self-extinguishing TPE Stainless steel Themoplastic Copolyester Supports the HACCP concept High Wear resistant material AT BL BG BK DB GN LB LG OR RE TR TQ UC WT YL Anthracite Blue Beige Black Dark blue Green Light blue Light gray Orange Red Transparent Turquoise Uncolored White Yellow ➇ Height/Diameter/ Bore size and style Height in Format: Hxxx Pin diameter in Format: Dxxx Bore size: SQ (= square) or RD (= round) either in or es Format: SQxxMM or RDxxIN ➈ Length/ Pins Length in Format: Lxxx Module width in Format: Wxxx HD Hold Down * For each series standard colors please refer to the table of materials for each belt (chapter 1.2). A number of other colors are available on request. Colors can vary from the original due to the print, production processes or material used.
EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511
More informationPROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
More informationProduct Range. modular belts. Prolink Beltfinder. Siegling total belting solutions. m.prolink-finder.com
Product Range modular belts Prolink Beltfinder The new app The easy way to find the right plastic modular belt for your conveyor. m.prolink-finder.com Siegling total belting solutions Beans drain through
More informationsiegling prolink modular belts Siegling total belting solutions
siegling prolink modular belts Product range Siegling total belting solutions Traditional conveyor belts are often intended for generic use, but the design features of Siegling Prolink modular belts are
More informationsiegling transilon conveyor and processing belts FullSeal and INCREASED HYGIENE Siegling total belting solutions
siegling transilon conveyor and processing belts FullSeal Lower cleaning costs and INCREASED HYGIENE Siegling total belting solutions Fullseal Lower cleaning costs and INCREASED HYGIENE Fullseal is a product
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationT L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationPOM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationChain return components
42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V
More informationAdvised minimum width SLIDING ROLLERS SERIES 20
Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More informationProduct Range. modular belts. Siegling total belting solutions
Product Range modular elts Siegling total elting solutions Beans drain through water-permeale modules while eing conveyed to the net processing step. Roust Siegling Prolink types keep tyre assemly production
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationPlanning Section. Environmental conditions. Different power supply. Industrial solutions
Planning Section 86 89 Environmental conditions Different power supply 90 Industrial solutions 91 Power calculation and selection of the Motorized Pulley for package transportation 93 Oil types and contents
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More informationuni CSB The versatile plastic modular belt for the Automotive Industry
uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationThe uni SNB M2 belt increases performance in the following industries/applications:
uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface
More informationFOR the gypsum industry
siegling belting THE full belting scope FOR the gypsum industry FROM one SINGLE source Siegling total belting solutions 2 A ONE-stOP SOURCE OF THE FULL BELTING RANGE FOR THE GYPSUM INDUSTRY When you need
More informationExtra Heavy Duty Modular Belts 2508 & 2630 Series
Extra Heavy Duty Modular Belts 2508 & 2630 Series Applications Dual Strand Test Tunnel Sgle Strand Car Wash Individual Pushers Mount Easily On Belt Surface Pictures by courtesy of Hohmeier Anlagenbau GmbH
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationN e W. modular plastic belts 7300 and 7200 series
N e W REGINA Chain Products* are available from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)358-330 (800)638-830 fx: (40)358-342 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com
More informationProduct range Power transmission belts
Product range Power transmission belts flat belts Siegling total belting solutions 2 Siegling Extremultus exceptional power transmission Contents We have developed the Siegling Extremultus power transmission
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationKP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER
KP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER Robust all-rounder with variable inner distribution 2 height mm widths 50 mm Pitch 35 mm Additional load up to 2 kg/m Travel
More informationRexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
More information7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationExtra Heavy Duty modular belts 2508 & 2630 Series
Extra Heavy Duty modular belts 2508 & 2630 Series EMERSON. E CONSIDER IT SOLVED. APPLICATIONS Pictures by courtesy of Hohmeier Anlagenbau GmbH and Audi AG Ingolstadt - Germany 2508 HEAVY DUTY BELTS PATENT
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationMatTop Chains. Overview Rexnord MatTop Chains. Solid Top Chains Hybrid. Perforated Top Chains 6391T. RubberTop Chains
MatTop Chains Solid Top Chains 1000 1005 1010 2000 2015 3125 5935 6300 6995 6995 Hybrid 7700 8505 Perforated Top Chains 500 1000 2000 2016 5936 6391T 7706 8506 Overview Rexnord MatTop Chains RubberTop
More informationMaterial Handling System
72 The versatile Material Handling System Modern factories are geared towards high speed production. Time pressure increases constantly. Changeover time between production runs need to be shorter. Therefore
More informationStandard-Duty Low-Profile Conveyors - SLPC
Standard-Duty Low-Profile Conveyors - SLPC Requiring only 1 13 / 16 inch in clearance to the top of the belt, these rugged low-profile conveyors are built to withstand the punishment of even punch presses
More informationROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
More informationCAMBRI-LINK PROVEN RESULTS APPLICATIONS ALL CAMBRI-LINK BELTS PROVIDE INDUSTRY-LEADING BENEFITS: BAKING COOLING
DURABLE, EFFICIENT BELTING FOR SPIRAL CAGE AND STRAIGHT-LINE APPLICATIONS POSITIVE DRIVE FULLY COLLAPSIBLE LARGE OPEN AREAS * Rugged flat wire style belt Efficient and economical For straight-line and spiral
More informationLEGO Element Survey 45560
1 Bushing, ½-module, yellow 4239601 4 Bushing, 1-module, gray 4211622 170x Connector peg with friction, 2-module, 4121715 Connector peg, 1½-module, beige 6013938 Axle with positioning stop, 4-module, beige
More informationC O N V E Y O R B E L T S
CONVEYOR BELTS GENERAL INDEX INFO....................................................... 3-9 Why Eurobelt Product Range Materials INFO SERIES 20.................................................. 10-23
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationP (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE
Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More informationProduct range Power transmission belts
Product range Power transmission belts flat belts Siegling total belting solutions 2 Siegling Extremultus exceptional power transmission Contents We have developed the Siegling Extremultus power transmission
More informationBottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
More informationSmall transport belts single-lane, double-lane
Small transport belt, single-lane Small transport belt, double-lane Specifications may change as design revisions take place; closing date: 32/2013 All rights reserved The copyright owner of this documentation
More informationWheels and castors with pneumatic tyres
Wheels and castors with pneumatic tyres 190 we innovate mobility www.blickle.com Table of Contents P L LS Series Load capacity Page P 180-490 mm 50-525 kg 192/193 194 L-P 200-20 mm 75-250 kg LS-P 400-415
More informationRexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative
More informationFood Grade Positive Drive Line
Food Grade Positive Drive Line The Next Step in Belting SuperDrive The homogeneous PositiveDrive belt, recognized worldwide as the best choice where hygiene and conveying efficiency are essential. The
More informationConveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2
Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal
More informationParts Rollers. Urethane Rollers Urethane Idlers 1.38" Flange Rollers 2.5" 2.5" 2.5" 4" 9.5" 3.6" 6.56"
A full line of drive sprockets, friction drive rollers, shakers, flails, and rollers of all types (steel, urethane, and rubber) are available for use with Noffsinger Belt Chain and Hook Chain conveyors.
More informationModular Belts and Components for Nose Over Transfer
Modular Belts and Components for Nose Over Transfer INDEX ABSTRACT End-to-end transfer description and general criticalities... 3 Regina solution to best tackle end-to-end transfer... 3 Regina ½ pitch
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationDEWA NON-METALLIC CHAIN SCRAPER SYSTEM
DEWA NON-METALLIC CHAIN SCRAPER SYSTEM DEWA non-metallic chain has been developed with vast experiences and utilising modem hi-technologies. DEWA chain is quite similar to the conventional steel chain
More informationClean Line Stainless steel
www.puzzleadvance.com Clean Line Stainless steel operating parts lock systems hinges profile rubber linear systems anti-fadigue mats clamping technology standard elements operating magnets Clean Line With
More informationLow Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
More informationuni MPB Straight running
88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationBelt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
More information1. Common section - external blinds
EXTERNAL BLINDS 05/2016 1. - EXTERNAL BLINDS, CC H, 1. Common section - external blinds 1.1 Limit dimensions for standard versions BLIND TYPE, c-80 cc vental Z-90 NOVAL Z-70 F-80 h Self-supporting system
More informationXR1000 Conveyors Parts List
DOCUMENT #EPL-XR000 INCLUDES: ELECTRIC & HYDRAULIC SHEET OF 28 CONVEYOR ELECTRIC ASSEMBLY VIEW 44-M43-00-000-BK FOR EL 5HP 3 * 2 70-700-25-PP 5HP MOTOR ELEC 4 * REF. DESCRIPTION PART NUMBER QTY CONVEYOR
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationDelivery program Semi-finished plastics
Delivery program Semi-finished plastics Centroplast Engineering Plastics GmbH Engineering plastics belong to most important industrial materials. They convince above all by their level of performance and
More informationFood Conveyor Belting
Food Conveyor Belting GatesMectrol.com Food Belts 1 Gates Mectrol Design Leadership and Service Reflecting 25 years of synchronous timing belt experience, the Gates Mectrol food belt product line represents
More informationPOSITIVELY DRIVEN CONVEYOR BELTS
CONVEYOR BELTS www.mafdel-belts.com www.food-conveyor-belts.com GB CONFIGURATION HORIZONTAL CONVEYOR BIDIRECTIONAL CONVEYOR FLIGHTED AND SIDEWALL CONVEYOR TROUGHED CONVEYOR 3 ADVANTAGES Our positive drive
More informationuni MPB Straight running
87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationT L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationLIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More informationMAX CONVEYORS GTB. more than technology
MAX CONVEYORS GTB more than technology CUSTOMIZED SOLUTIONS Assembly Watch industry Electronics industry Construction industry Mechanical engineering Plastics industry Printing industry Automotive suppliers
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More informationPOSITIVELY DRIVEN CONVEYOR BELTS
CONVEYOR BELTS www.mafdel-belts.com www.food-conveyor-belts.com GB CONFIGURATION HORIZONTAL CONVEYOR BIDIRECTIONAL CONVEYOR FLIGHTED AND SIDEWALL CONVEYOR TROUGHED CONVEYOR 3 ADVANTAGES Our positive drive
More informationP (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
More informationSeries R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]
Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5
More information