Rexnord 880 TAB TableTop Chain
|
|
|
- Felicia Rogers
- 6 years ago
- Views:
Transcription
1 880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/ / Min. Back-flex Pitch Bottom (15.9 mm) vailable s Pin s LF Low Friction Stainless Steel ,890 Yes MLF Medium Duty Low Friction Stainless Steel ,890 No Made-to-Order s S nti-static Stainless Steel NR NR 255 1,134 No BWR Black Wear Resistant Stainless Steel NR NR 510 2,269 No CR Extreme Chemical Resistant Stainless Steel ,512 Yes D Plain cetal Stainless Steel ,890 No DUV Ultraviolet Resistant Stainless Steel ,890 No FR Flame Retardant Stainless Steel ,134 No MR Melt Resistant Stainless Steel NR NR 425 1,890 No P Chemical Resistant Stainless Steel ,512 Yes PS Platinum Series Stainless Steel ,890 Yes WD White Plain cetal Stainless Steel ,890 Yes WHP White High Performance Stainless Steel ,890 Yes WLF White Low Friction Stainless Steel ,890 Yes WX Green brasion Resistant Polyamide Stainless Steel NR NR 425 1,890 No The Food and Drug distration () accepts certain materials for direct food contact. approved material is compliant to 21 CFR 177. Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, LLC. strength is listed at room temperature. NR = Not Recommended. Rexnord 880 Series TableTop Product Portfolio TT
2 Rexnord 880 TB TableTop 880 TB Min. Side-flex Drawing 1.81 in (46.0 mm) Overall (42.9 mm) Over TBs Photo shows 880 TB TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/ / Min. Back-flex Pitch TB Bottom 0.62 in (15.7 mm) TB Top 0.47 in (11.9 mm) vailable s Pin s LF Low Friction Stainless Steel ,890 Yes MLF Medium Duty Low Friction Stainless Steel ,890 No PS Platinum Series Stainless Steel ,890 Yes Made-to-Order s S nti-static Stainless Steel NR NR 255 1,134 No BWR Black Wear Resistant Stainless Steel NR NR 510 2,269 No CR Extreme Chemical Resistant Stainless Steel ,512 Yes D Plain cetal Stainless Steel ,890 No DUV Ultraviolet Resistant Stainless Steel ,890 No FR Flame Retardant Stainless Steel ,134 No MR Melt Resistant Stainless Steel NR NR 425 1,890 No P Chemical Resistant Stainless Steel ,512 Yes WD White Plain cetal Stainless Steel ,890 Yes WHP White High Performance Stainless Steel ,890 Yes WLF White Low Friction Stainless Steel ,890 Yes WX Green brasion Resistant Polyamide Stainless Steel NR NR 425 1,890 No TT The Food and Drug distration () accepts certain materials for direct food contact. approved material is compliant to 21 CFR 177. Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, LLC. strength is listed at room temperature. NR = Not Recommended. Rexnord 880 Series TableTop Product Portfolio
3 HPM 880 TB Photo shows HPM 880 TB TableTop molded in High Performance (HP ) material with High Friction Inserts. Information Min. Side-flex pproximate 3 1/ / Insert 0.39 in (10.0 mm) Min. Side-flex Min. Back-flex Pitch Insert Length Drawing TB Bottom 0.62 in (15.7 mm) 1.81 in (46.0 mm) Insert Height 0.08 in (2.0 mm) Overall (42.9 mm) Over TBs Solid Dome (60 Shore ) TB Top 0.47 in (11.9 mm) Insert Length in mm in mm Rexnord 880 TB TableTop with High Friction Inserts vailable s Pin Made-to-Order s HPM High Performance with Molded Insert Stainless Steel ,890 Yes The Food and Drug distration () accepts certain materials for direct food contact. approved material is compliant to 21 CFR 177. Rexnord, TableTop and HP are trademarks of Rexnord Industries, LLC. Inserts may be spaced every pitch, every second pitch, etc. strength is listed at room temperature. NR = Not Recommended. Rexnord 880 Series TableTop Product Portfolio TT
4 Rexnord 880 TB TableTop with Tight Side-flex 880 TB BO Photo shows 880 TB BO TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/ / Min. Side-flex Min. Back-flex Drawing TB Bottom 0.62 in (15.7 mm) 1.81 in (46.0 mm) Overall (42.9 mm) Over TBs TB Top 0.47 in (11.9 mm) Pitch vailable s Pin s LF Low Friction Stainless Steel ,890 Yes Made-to-Order s S nti-static Stainless Steel NR NR 255 1,134 No DUV Plain cetal Ultraviolet Resistant Stainless Steel ,890 No FR Flame Retardant Stainless Steel ,134 No P Chemical Resistant Stainless Steel ,512 Yes PS Platinum Series Stainless Steel ,890 Yes TT The Food and Drug distration () accepts certain materials for direct food contact. approved material is compliant to 21 CFR 177. Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, LLC. strength is listed at room temperature. NR = Not Recommended. Rexnord 880 Series TableTop Product Portfolio
5 880 Semi-Steel Sprocket (16.0 mm) Face NS880 Thermoplastic Split Sprocket (16.0 mm) Face 815/820 Idler Wheel 2.19 in (55.6 mm) Length thru Bore Length thru Bore 1.63 in (41.3 mm) Bore Diameter Pitch Diameter Outside Diameter Length thru Bore 1.63 in (41.3 mm) Bore Diameter Pitch Diameter Outside Diameter Face 2.44 in (62.0 mm) Bore Diameter Outside Diameter 880 Semi-Steel Sprocket Information Bore Diameter (Shaft-Ready) Number Pitch Outside Bore Diameter (Round) pproximate Round Square Of Teeth Diameter Diameter in mm in mm in mm actual effect in mm in mm lbs kg /4 1 3/ /4 2 1/ /4 1 1/ /4 1 3/ /4 1 3/ /4 2 1/ /4 1 3/ /4 2 1/ /4 1 3/ /4 2 1/ Shaft-ready round bore sprockets are shipped with keyway and setscrew. NS880 Thermoplastic Split Sprocket Information Bore Diameter (Shaft-Ready) Number Pitch Outside Bore Diameter (Idler) pproximate Round Square Of Teeth Diameter Diameter in mm in mm in mm actual effect in mm in mm lbs kg / / / / Rexnord 880 Series TableTop Compatible Sprockets Imperial shaft-ready round bore sprockets are shipped with keyway and setscrew. Metric shaft-ready round bore sprockets are shipped with keyway and no setscrew. Idler bores are designed to spin freely on the shaft. 815/820 Idler Wheel Imperial Information Equivalent Tooth Size Outside Diameter Idler wheels are designed to spin freely on the shaft. Imperial Bore Diameter (Idler) pproximate in mm in lbs kg / /16 1 1/4 1 1/ / /16 1 1/4 1 1/ / /16 1 1/4 1 1/ / Idler wheels are designed to spin freely on the shaft. 27 tooth idler wheel is available on a made-to-order basis and is subject to imum order requirements. 815/820 Idler Wheel Metric Information Equivalent Tooth Size Outside Diameter Metric Bore Diameter (Idler) pproximate in mm mm lbs kg Rexnord 880 Series TableTop Product Portfolio TT
6 Corner Track (Two Piece) Track ngle 90.0 Noal Corner View - Bevel ngle 8.0 Corner track kit supplied as one 90 inside and one 90 outside track, which can be used as either carry or return. View - TB Design Rexnord 880 Series TableTop ccessories ccomodates Top Noal Corner pproximate Corner Track Plate Color Kit in mm in mm in mm in mm in mm in mm lbs kg N18B3 3 1/ Nylatron Black U18B3 3 1/ UHMWPE White N24B3 ll ll Nylatron Black U24B3 ll ll UHMWPE White TB Design N18R3 3 1/ Nylatron Black U18R3 3 1/ UHMWPE White N24R3 ll ll Nylatron Black U24R3 ll ll UHMWPE White Nylatron is a registered trademark of Quadrant Engineering Plastics Products. Track ngle 45.0 (Each Track) Gap Between Each Track 0.1 in (3.0 mm) Corner Track )(Four Piece) Noal Corner View - View - TB Design Bevel ngle 8.0 Corner track kit supplied as two 45 inside and two 45 outside track, which can be used as either carry or return. ccomodates Top Noal Corner pproximate Corner Track Plate Color Kit in mm in mm in mm in mm in mm in mm lbs kg N30B3 ll ll Nylatron Black U30B3 ll ll UHMWPE White TB Design N30R3 ll ll Nylatron Black U30R3 ll ll UHMWPE White Nylatron is a registered trademark of Quadrant Engineering Plastics Products. TT Rexnord 880 Series TableTop Product Portfolio
7 Corner Disc (Flat Top) Top of Disc to Top of (4.1 mm) Bottom of to Top of Mounting Plate 1.78 in (45.2 mm) L Mounting Plate Center of Disc to Center Outside 3/4-16UNC - 2 Threaded Shaft Indent Corner Disc L Top of Disc to Bottom of Rib (16.0 mm) Hub Bottom to Top of Mounting Plate 0.34 in (8.6 mm) Hub Bottom to Bottom of Shaft 1.59 in (40.4 mm) Rim 0.36 in (9.1 mm) Top of Corner Disc to Top of Mounting Plate Center of Disc to Outside pproximate Corner Disc Center Number in mm in mm lbs kg 880BOTB FT Corner Disc : luum. For 880 TB BO chain only. Rexnord 880 Series TableTop ccessories Rexnord 880 Series TableTop Product Portfolio TT
Rex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
Rex 1701 Multiflex Chain
1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate
Rexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
Rex 881 TableTop Chain Side-flexing
Prefix S SS 881 Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/4 3.25 82. 6 18.00 7. 2 2.00 2.97 4-1/2 4. 1 3 00 609. 6 2. 3.71 7-1/2 7. 19 5 00 609. 6 3.70 5.49 Cha Carbon Staless
Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
Rex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
Download the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
Complementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
CHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
FlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains
FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of
PRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
Martin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
SideGrip Chain. Maintenance Manual
SideGrip Chain Maintenance Manual Rexnord, Rex, TableTop, MatTop, Platinum Series, PS, and HP are trademarks of Rexnord Industries, Inc. All rights reserved. Nylatron is a registered trademark of Quadrant
1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
Index SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop
Ammeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
MATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
CONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP
CONVEYOR INSTALLATION MANUAL I VERSION 1 Rexnord TableTop and MatTop Chains Rexnord Roller Upgrade System REXNORD FLATTOP Rexnord Industries, LLC For more than one hundred years, Rexnord has provided superior
EB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
EB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
Rexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
MicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
TableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
MatTop Chains. Overview Rexnord MatTop Chains. Solid Top Chains Hybrid. Perforated Top Chains 6391T. RubberTop Chains
MatTop Chains Solid Top Chains 1000 1005 1010 2000 2015 3125 5935 6300 6995 6995 Hybrid 7700 8505 Perforated Top Chains 500 1000 2000 2016 5936 6391T 7706 8506 Overview Rexnord MatTop Chains RubberTop
P (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
SPROCKETS for belts series
eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier
Conveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
DOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
PLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
EC / EB Series Electro Clutches and Brakes
EC / EB Series Electro Clutches and Brakes Shaft Mounted Clutches and Brakes Shaft Mounted Clutches EC Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any
3.25, 4.5, 7.5 Tabletop Conveyor Specifications
3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder
siegling prolink modular belts Siegling total belting solutions
siegling prolink modular belts Product range Siegling total belting solutions Traditional conveyor belts are often intended for generic use, but the design features of Siegling Prolink modular belts are
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
ROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
T L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
ATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
SPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...
Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
Engineering Class Sprockets
Engineering Class Sprockets 28 Engineering Class Sprockets Renold Jeffrey replaceable sprockets and traction wheels are specially designed for the realities of high-stress, heavy-duty service. A variety
Omni-Pro 075. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and
ATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
Air Champ RPM DPC-15T DPC-13T DPC-11T DPC-11T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T
DUAL PLATE FRICTION CLUTCH SELECTION CHART Friction clutch recommendation is based upon air pressure of 50 psi, transmitted horsepower and speed. RPM 100 200 300 400 500 600 700 800 900 1000 1100 1200
Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
Rexnord TableTop Chains New 1873 Gripper Chains K325 - K450
Rexnord TableTop hains New 1873 hains K325 - K450 Rexnord FlatTop introduces new version of gripper chains with of (82,5) and (114,3). These new products are the answer to the need for more compact design
Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS
PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS PAGE 2 Table of Contents: Drive and Bore Adaptors..3 Clevis Adaptors.4 Shoulder Adaptors.5 Flat Idler Pulleys..6 Flat Idler Pulleys Continued
FOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511
Ammeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
Keyseat 180 from split. Available Sure-Grip Bushings (Millimeter Bores-Inch Bolt) F J M N P SKL SFL EL QT JA SH SDS SD SK SF E
B u s h i n g s Sure-Grip * Quick Detachable bushings are easy to install and remove. They are split through flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit.
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
Contents Section E. Section E Contents. Series
Contents Section E Vacuum um Pumps & Blowers Series ower Tank Accessories Section E.1 ASME Code Float Level Indicators... E.1.2 Non-Code Float Level Indicators... E.1.4 Sight Eye Assemblies and Parts...
ENGINEERING CHAIN DIVISION
Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick.
HabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
Installation and Maintenance Instructions Falk Wrapflex (Page 1 of 7) 1. General Information. 2. Safety and Advice Hints DANGER! Type 10R.
(Page 1 of 7) This is the Original Document in English Language Type 10R Type 31R Type 35R Figure 1 - Wrapflex coupling range 1. General Information 1.1. Falk Wrapflex Couplings are designed to provide
P (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
T Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
DTS -C. Conveyor Design Manual. Comb System 4707/
DTS -C Comb System Conveyor Design Manual 4707/5997-7705 Rexnord, Rex, TableTop, MatTop and DTS-C are trademarks of Rexnord Industries, Inc. All rights reserved. Table of Contents Introduction / Safety.................................
EXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49
FBN/FBK Chain Couplings
s FBN/FBK Order Example FBN 4012 D20 FBK 4012 D20 (for New JIS Key) (for Old JIS Key) Semi-F supported FBN5014D20 (inner diameter D20) FBN5014D30 (inner diameter D30) Type Model Shaft Hole Diameter Conveyor
POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
Industrial Chain and Conveying
Industrial Chain List Price Book Industrial Chain and Conveying Chain, Idlers, Engineered Chain, Conveying Equipment 102-606 October 1, 2017 Supersedes January 1, 2017 TABLE OF CONTENTS Chain Lengths and
T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
AT Clutch Major Service Sizes 25, 55, 115
P-1404 819-0324 AT Clutch Major Service Sizes 25, 55, 115 Installation Instructions Contents Introduction............................ 2 Warranty....................... back cover Failure to follow these
MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
One Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
Assortment 2013_FPT BOOK.indb /02/13 6:57 PM
Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self
MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
URETHANE PRODUCT GUIDE POWERING GLOBAL INDUSTRY
URETHANE PRODUCT GUIDE INTRODUCTION ABOUT US URETHANE ING Megadyne, headquartered in Mathi Italy, is a global manufacturer of urethane timing belts. Megadyne was started in 1957 when Mr. Corrado Tadolini
Rexnord TableTop and MatTop Chains
Rexnord FlatTop Engineering Manual Rexnord TableTop and MatTop Chains Engineering Manual Engineering Manual Flattop SAFETY CONSIDERATIONS Product Safety: Products designed and manufactured by Rexnord are
uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
2/22/2018 Camshaft Timing Drive Components Cleaning and Inspection 2007 Saturn Aura MotoLogic
2007 Aura Applies to: 3.6L Report a problem with this article Cleaning Procedure Important: Some models use a second design inverted tooth timing drive system on the secondary drive components. Refer to
Rigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors
NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors 70 SERIES DOUBLE C FACE BRAKE The Next Generation in Direct-Acting Brakes DIRECT REPLACEMENT for Stearns 87,700 Series Brakes DINGS TRADITIONAL
Forged Chains & Sprockets
Forged Chains & Sprockets Forged Link Standard Series MN Grade Standard in stock MINIMUM ULTIMATE STRENGTH LB CHAIN No. PITCH T C S F R OD MN CN C CD S 420 JKF102Z 4 (102) 0.94 1.42 0.31 0.39 0.25 0.56
Can-Am. Mill Chain Sprockets. Can-Am Products visit us at
Can-Am Mill Chain Sprockets Can-Am Products visit us at www.can-amchains.com CAN-AM CHAINS CANADA CAN-AM CHAINS USA The origin of CAN-AM chain dates back to 1966, and a small machine shop in Richmond,
Air Champ. Product Function & Selection Chart...54 Section Index...55
GENERAL INFORMATION Product escription Index...1 PROUCT NUMBER INEX Product Numbers Index...2-3 FAMILY OF PROUCTS Air Champ Features & Benefits...4 Air Champ Family of Products...5-9 CLUTCHES Product Function
Advanced Technology Tension Clutches
P-220 819-0339 Advanced Technology Tension Clutches Installation Instructions Contents Installation................................. 2 Clutch Repair On the Shaft.................. 4 Clutch Service Major.......................
P R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International
+91-8048762018 Spectra Plast India Private Limited http://www.systemplaast.com/ Spectra Plast India Pvt. Ltd. is a renowned manufacturer and exporter of a comprehensive range of conveyor components and
RUBBER BELT PRODUCT GUIDE
RUBBER BELT PRODUCT GUIDE Megadyne, headquartered near Mathi Italy, is a global manufacturer of rubber and urethane power transmission, product handling and linear positioning drive belts. Megadyne was
Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
uni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written