ADJUSTABLE PITCH SERIES
|
|
- Myrtle Alexander
- 6 years ago
- Views:
Transcription
1 ADJUSTABE PITCH SERIES FEATURES: Stock Sizes - 1 and 2 grooves up to 25 HP Both 1 and 2 groove adjustable sheaves permit variations of as much as 30% in speed when used with a fixed diameter sheave Available in metric bores arger sizes come with 2 set screws Other special bores are available, call for delivery terms NOTE: Applications with a speed superior to 5000 ft./ min. may require more accurate balancing. Specify sheave and required bore diameter when ordering. EXAMPE: 8600X1-3/ : 1-3/8: X 1-3/8 ADJUSTABE PITCH SHEAVE SIZE The first digit stands for 8000 series. ast three digits represent the approximate outside diameter (6.00) BORE SIZE (1-3/8") Bore size: Metric bore sizes are de signated with MM after the metric dimension (X 25MM). Inch bore sizes are de signated with the whole inch followed by the fraction. For example, a 1.5" diameter bore would be 1-1/2. Pulley Adjustment Modify the sheave pitch diameter by rotating the adjustable flange on the threaded hub of the pulley. Once the required diameter is obtained, tighten the adjusting screw(s) on one of the two flat surfaces. To obtain the same pitch diameter in both grooves of the D8000 series, tighten both movable flanges against the central flange, make trace marks on both flanges, then rotate both flanges the same number of turns. HOW TO ORDER
2 ADJUSTABE PITCH SERIES 1 GROOVE 2 GROOVES 1 GROOVE Part No. Cross. Ref. 1 F Max. Min. Max. Min. G Available Stock Bores Weight (lbs) VP /4 1-1/32 21/32 3/4 3/8 9mm 14mm 19mm VP /4 1-5/32 25/32 7/8 1/2 9mm 14mm 19mm 24mm 28mm VP /4 1-5/32 25/32 7/8 1/2 12.7mm 14mm 19mm 24mm 28mm VP /4 1-5/32 25/32 7/8 1/2 12.7mm 14mm 19mm 24mm 28mm VP /4 1-9/32 25/32 1 1/2 1-3/8 1-5/8 12.7mm 14mm 19mm 24mm 28mm 38mm VP60/1VP62/1VP /4 1-9/32 25/32 1 1/ VP68/1VP /4 1-9/32 25/32 1 1/2 5/8 3/4 7/ /8 1-3/8 1-5/8 12.7mm 19mm 24mm 28mm 38mm 42mm 5/8 3/4 7/ /8 1-3/8 1-5/8 12.7mm 19mm 24mm 28mm 38mm 42mm VP /4 1-9/32 25/32 1 1/2 3/4 7/ /8 1-3/8 1-5/8 24mm 28mm 38mm 42mm 7.0 * Supplied without keyway 1 Comes with two set screws at 120 degrees 2 Comes with two set screws at 120 degrees and an H Key U.S. Patent Nº Can. Patent Nº
3 ADJUSTABE PITCH SERIES DATUM DIAMETERS Datum Diameter, Inches Part No. Min. Max. 0 Turn Close 1 Turn 2 Turns 3 Turns 4 Turns 5 Turns 6 Turns (4) A (5) B 5V , P.D. for A belts = Datum Dia. A belts +.25" P.D. for B belts = Datum Dia. B belts +.35" P.D. for 5V belts = Datum Dia. 5V belt +.10"
4 ADJUSTABE PITCH VP SERIES VP SERIES FEATURES: 1VP and 2VP Series are finished bore variable speed sheaves made of cast iron and designed for heavier duty service up to 25HP Available in single and double grooves, they offer a pitch range from 1.9" to 6.7" (A belt) and 2.4" to 7.0" (B belt) Type 2 model has positive locked-on settings HOW TO ORDER EXAMPE: 1VP71X3/4 1 VP71 X 3/4 1: NUMBER OF GROOVES VP71: ADJUSTABE PITCH SHEAVE SIZE ast 2 digits represent the approximate outside diameter (7.1") 3/4: BORE SIZE (3/4") Bore size: Inch bore sizes are designated with the whole inch followed by the fraction. For example, a 1.5" diameter bore would be 1-1/2. Pulley Adjustment Modify the sheave pitch diameter by rotating the adjustable flange on the threaded hub of the pulley. Once the required diameter is obtained, tighten the adjusting screw(s) on one of the two flat surfaces. To obtain the same pitch diameter in both grooves of the VP series, tighten both movable flanges against the central flange, make trace marks on both flanges, then rotate both flanges the same number of turns.
5 1VP & 2VP SERIES ADJUSTABE PITCH VP SERIES TYPE 1 (without key) TYPE 2 TYPE 3 (without key) TYPE 4 Part No. Type F Max. Min. Max. Min. G Available Stock Bores Weight (lbs) 1VP /2 13/16 9/16 5/8 3/8 *1/2 7 1VP /32 13/16 9/16 5/8 3/8 *1/2 5/8 3/ VP /8 1 11/16 13/16 1/2 *1/2 5/8 3/4 7/ VP /8 1-1/16 11/16 7/8 1/2 *1/2 5/8 3/4 7/ VP /8 1-1/16 11/16 7/8 1/2 *1/2 5/8 3/ VP /8 1-1/8 3/4 7/8 1/2 7/ / VP /16 11/16 7/8 1/2 *1/2 5/8 3/ VP /8 1-1/8 3/4-7/8 1/2 7/ / VP /8 1-1/16 11/16 7/8 1/2 *1/2 5/8 3/ VP /8 1-1/8 3/4 7/8 1/2 7/ / VP /32 1-1/4 7/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/ VP /32 1-1/8 3/4 7/8 1/2 5/8 3/4 7/ /8 1-1/4 1-3/ VP /32 1-1/4 7/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/8 1-5/ VP /32 1-1/8 3/4 7/8 1/2 5/8 3/4 7/ /8 1-1/4 1-3/ VP /32 1-1/4 7/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/8 1-5/ VP /32 1-1/4 7/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/ VP /8 13/16 1/2 *1/2 5/8 3/4 7/ VP /8 1-3/8 7/8 1/2 5/8 3/4 7/ / VP /8 1-3/8 7/8 1/2 5/8 3/4 7/ / VP /8 1-3/8 7/8 1/2 5/8 3/4 7/ / VP /4 2-3/8 1-5/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/8 1-5/ VP /8 1-3/8 7/8 1/2 3/4 7/ /8 1-1/4 1-3/ VP /4 2-3/8 1-5/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/8 1-5/ VP /8 1-3/8 7/8 1/2 7/ /8 1-1/4 1-3/8 1-5/8 1-7/ VP /4 2-3/8 1-5/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/8 1-5/8 1-7/8 50MM VP /4 2-3/8 1-5/8 1-1/32 21/32 3/4 7/8 1-1/8 1-3/8 1-5/8 1-7/ * Supplied without keyway thru the bore
6 ADJUSTABE PITCH VP SERIES DATUM DIAMETERS 3 (4) A (5) B 5V Part No. Min. Max. 0 Turn Close P.D. for 3 belts = Datum Dia. 3 belts +.25" P.D. for "A (4) belts = Datum Dia. A belts +.25" 1 Turn Datum Diameter, Inches 2 Turns 3 Turns 4 Turns 5 Turns 1VP VP VP VP VP VP VP VP50 & 2VP VP56 & 2VP VP60 & 2VP VP62 & 2VP VP65 & 2VP VP68 & 2VP VP71 & 2VP VP75 & 2VP VP VP VP VP VP VP50 & 2VP VP56 & 2VP VP60 & 2VP VP62 & 2VP VP65 & 2VP VP68 & VP VP71& 2VP VP75 & 2VP VP VP VP VP VP VP50 & 2VP VP56 & 2VP VP60 & 2VP VP62 & 2VP VP65 & 2VP VP68 & 2VP VP71 & 2VP VP75 & 2VP VP VP VP VP VP VP50 & 2VP VP56 & 2VP VP60 & 2VP VP62 & 2VP VP65 & 2VP VP68 & 2VP VP71 & 2VP VP75 & 2VP P.D. for B (5) belts = Datum Dia. B belts +.35" P.D. for 5V belts = Datum Dia. 5V belts +.10" 6 Turns
Features / Benefits Fixed Pitch Drives... PT8-2 Variable Pitch Drives... PT8-2
CONTENTS V-Drives Features / Benefits Fixed Pitch Drives......................................... PT8-2 Variable Pitch Drives....................................... PT8-2 Selection/Dimensions Light Duty
More informationVARIABLE SPEED DRIVES
VARIABLE SPEED DRIVES OR CHANGING SPEEDS REQUENTLY, RAPIDLY AND EICIENTLY BROWNING offers one of the world s most complete selections of in-stock variable speed drives, including variable pitch sheaves
More informationSIT Variable speed pulleys VAR
SIT Variable speed pulleys VAR Description - VAR Pulleys The variable speed pulley is a well established drive; designed to give continuous speed variation at a comparative low cost. Unfortunately it is
More informationMOTORS. Features: UL Certificate of Compliance CSA Approved and CE Marked Designed for 40 Ambient Temperature, 3300 Ft. Elevation NEMA Design B Torque
BALDOR MOTORS MOTORS ODP Motors - Three Phase Integral Horsepower General Purpose Motors Rigid Base 2, 4 & 6 Pole NEMA Premium & EPACT Class F Insulation System Inverter Duty 1.15 Service Factor 60 Hz
More informationHenan Star Machine Co.,Ltd
Henan Star achine Co.,td Cast Iron Sheaves We provide the whole series of t bore (3V, 5V, 8V.). hey are made of high-grade GG25 cast iron with delicate finish and assembled with high precision. hey can
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationVariable Speed Drives
-1 Why Vary Speed? Variable speed drives are needed because many applications are not run at the same speed all of the time, due to the surrounding conditions. Revolutions per minute (RPM) of the driven
More informationChain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
More information1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
More informationMECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationV-BELT DRIVES AND BEARINGS
V-BELT DRIVES AND BEARINGS The first name in air handling products Product types...3 Product features V-Belts... 4 B5V sheaves... 4 Variable speed sheaves... 5 Bushings... 5 Bearings... 5 Commercial-duty
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationProfile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
More informationAir Moving Products & Accessories. air Catalog. featuring...gates Belts FAN BLADES BLOWER WHEELS ACCESSORIES V-BELTS ADAPTER HEX HUBS ETC.
air Air Moving Products & Accessories 2006 Catalog featuring...gates Belts FAN BLADES BLOWER WHEELS ACCESSORIES V-BELTS ADAPTER HEX HUBS ETC. IR MARS AIR MOVING COMPONENTS AIR MOVING COMPONENTS AN BLADES
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More information...DRIVE TIGHTENERS, IDLERS, IDLER BUSHINGS, SET COLLARS, KEYSTOCK AND CAST IRON BARS A WIDE VARIETY OF SPECIALIZED PRODUCTS FOR AUTOMATIC PRODUCTION
DRIVE TIGHTENERS AND IDLERS...DRIVE TIGHTENERS, IDLERS, IDLER BUSHINGS, SET COLLARS, KEYSTOCK AND CAST IRON BARS A WIDE VARIETY OF SPECIALIZED PRODUCTS FOR AUTOMATIC PRODUCTION REGAL is adding new BROWNING
More informationDIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
More informationMAXITORQ ELECTRICALLY ACTUATED CLUTCHES AND BRAKES
MAXITORQ ELECTRICALLY ACTUATED CLUTCHES AND BRAKES HOW TO SELECT THE CORRECT CLUTCH OR BRAKE The easiest way is to ask our application engineers. For clutch application, we need to know: Torque or H.P.
More informationAir Champ RPM DPC-15T DPC-13T DPC-11T DPC-11T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T
DUAL PLATE FRICTION CLUTCH SELECTION CHART Friction clutch recommendation is based upon air pressure of 50 psi, transmitted horsepower and speed. RPM 100 200 300 400 500 600 700 800 900 1000 1100 1200
More informationEC / EB Series Electro Clutches and Brakes
EC / EB Series Electro Clutches and Brakes Shaft Mounted Clutches and Brakes Shaft Mounted Clutches EC Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any
More informationHTD Pulley & Belt Drives
HTD Pulley & elt Drives HTD timing belts offer optimised load distribution through the rounded tooth form, guaranteeing high power transmission in low speed and high torque applications. apable of transmitting
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More informationStock QD Bushings. DISMOUNTING 1. Remove pull-up bolts and screw them into TAPPED holes in sheave or sprocket and against flange of QD bushing to
Stock Q s MOUNTING ROCEURE Q USHINGS IMORTANT E SURE TAERE CONE SURFACES OF Q USHING AN INSIE OF SHEAVE OR SROCKET HU ARE RY AN FREE OF ALL FOREIGN SUSTANCES SUCH AS AINT, GREASE, OR IRT. STANAR MOUNTING
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationGates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
More informationCONTENTS Bushings and Hubs
CONTENTS s and Hubs TPER-LOCK s Features/Benefits............................................................. PT6-2 Nomenclature................................................................. PT6-2
More informationDIMENSIONS AND PERFORMANCES
DIMENSIONS AND PERFORMANCES Hub and bores Power [kw] Belt Variation range Weight (1) Steel hub diameter (2) H 11 tolerance pilot bore (3) H 7 tolerance on finished bores complete with keyway to UNI standard
More informationNew Standard Power Transmission
Systematic Services, Strong Supports Comprehensive System e-business, Trading Globally Excellent Equipment Located in Los Angeles, California, New Standard Power Transmission (NSPT), Inc. is one of the
More informationBringing Component Parts Together
Bringing Component Parts Together About Concentric International Concentric International connects retail, wholesale and original equipment manufacturers (OEM) with the value of global sourcing for products
More informationFiner stock a range of quality V-Belt Pulleys. Constructed from cast iron, each pulley is Taper Locked to accommodate a range of shaft sizes.
V-Belt Pulley Finer stock a range of quality V-Belt Pulleys. Constructed from cast iron, each pulley is Taper Locked to accommodate a range of shaft sizes. V-BELT PULLEY Finer pulleys under go stringent
More informationNow you can get design flexibility and lasting performance from our complete family of AccuDrive Precision Products.
ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family of AccuDrive Precision Products. Series W Precision Servo Gearhead Output torque up to 8,500
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More informationMaska is proud to now be part of Baldor. You could say it is "A Perfect Fit".
0.1Intro_pages.8.qxp 20090401 15:52 Page 1 Maska is proud to now be part of Baldor. You could say it is "A Perfect Fit". www.baldor.com www.maskapulleys.com INDUSTRIAL APPLICATIONS SPECIAL APPLICATIONS
More informationFeatures/Benefits...G2-3. Specifications...G2-7. Nomenclature...G2-8. Easy Selection...G2-9
CONTENTS Features/Benefits...G2-3 Gearing Reference Specifications...G2-7 Nomenclature...G2-8 Easy Selection...G2-9 Selection Selection...G2-12 pplication and Class Numbers...G2-14 Class I Selections...G2-15
More informationmodel HP Servo AccuDrive Family of Products
model 09090.01 AccuDrive Family of Products Series W Model RG Series S Series P Series E/LE ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationJason Industrial Inc.
Jason Industrial Inc. POWER TRANSMISSION V-BELTS Select Multi-Plus A & B Belts and Discontinue Your 4L & 5L Inventory! Dual Part Number System is more than just labeling. FHP & Classical have the same
More informationWood s Sure-Grip Pulleys
Wood s SureGrip Pulleys B5 Statically Balanced Up to 65 feet per minute rim speed Dynamic balance based on rim speed and face width P1686TBW 11/15... TB Wood s 888896637 B51 SureGrip Pulleys Dimensions
More informationBLOWER PARTS & ACCESSORIES
BRACKET KITS NEW! BOLT ON BEARING BRACKET Replacement Bearing Brackets for Lau Belt Drive Blower (see Page 22). 9 Blower 054866-01 10 Blower 054867-01 11 Blower 054868-01 12 Blower 054869-01 SERVICE TIP:
More informationROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
More informationRigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
More informationProduct Specification Sheet Number: 319
A Series Class I Frame Blower Product Specification Sheet Number: 319 Notes: Shaded areas indicate Lau preferred product. Selections in non -shaded areas and optional features may affect price and availability.
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationWIRE AND WIRE ROPE DIVISION
WIRE AND WIRE ROPE DIVISION Pulley & Sheave Product Catalog www.loosco.com Pulleys and 1 V0117 Table of Contents About this catalog...3 Military Specification Technical Information...4 Military Specification
More informationJASON MULTI-PLUS DUAL BRAND V-BELTS LIGHT & HEAVY DUTY SHEAVES & BUSHINGS. For Heating. Air Conditioning. Ventilation. Refrigeration.
JASON MULTI-PLUS DUAL BRAND V-BELTS LIGHT & HEAVY DUTY SHEAVES & BUSHINGS For Heating Air Conditioning Ventilation Refrigeration Industrial TABLE OF CONTENTS Product Type Page V-BELTS F.H.P./3L Section
More informationMODEL VBO-HV & VBO UPBLAST PROPELLER ROOF FANS
READ AND SAVE THESE INSTRUCTIONS 9668-D Heinrich Hertz Drive, San Diego, CA 92154 PH: 619-946-1224 MODEL VBO-HV & VBO UPBLAST PROPELLER ROOF FANS SHIPPING INSPECTION Romlair Model VBO-HV & VBO fans are
More informationGRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS
GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS. 112000-115499 1 DISCHARGE ASSEMBLY - GRAIN BELT DRIVE OVER CONVEYOR SERIAL NOS. 112000-115499 2 REF # PART NO. DESCRIPTION QTY 1 C200760 Discharge Weldment
More informationAir Champ DPC-9T & DPC-11T Static Torque in Inch-Pounds. Air Pressure in PSI
CLUTCHES DPC SERIES DUAL PLATE CLUTCHES This Series, specified by component, allows you to custom design for specific application requirements: Static Torque capacity up to 36,000 In. Lbs. @ 80 psi Maximum
More informationJASON MULTI-PLUS DUAL BRAND V-BELTS LIGHT & HEAVY DUTY SHEAVES & BUSHINGS. For Heating. Air Conditioning. Ventilation. Refrigeration.
JASON MULTI-PLUS DUAL BRAND V-BELTS LIGHT & HEAVY DUTY SHEAVES & BUSHINGS For Heating Air Conditioning Ventilation Refrigeration Industrial TABLE OF CONTENTS Product Type Page V-BELTS F.H.P./3L Section
More informationPOWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Poly-V Pulleys & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them Poly-V Pulleys & elt Drives Poly-V Pulleys & elt Drives Poly-V is a multi rib belt drive whose special construction allows it to be used with
More informationCan-Am. Mill Chain Sprockets. Can-Am Products visit us at
Can-Am Mill Chain Sprockets Can-Am Products visit us at www.can-amchains.com CAN-AM CHAINS CANADA CAN-AM CHAINS USA The origin of CAN-AM chain dates back to 1966, and a small machine shop in Richmond,
More informationGear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
More informationRHL/IAM. Turbine - HKT-645 with hydraulic jack J6. 1 / 3 This drawing is the propety of Remote HydroLight and IAM, Afghanistan
Parts List ITEM QTY No. Ref. No. TITLE DESCRIPTION 1 1 1.H6 632.100.000 Runner for HKT-64 2 1 2.H6 63N.200.000 Frame HKT-64 bottom frame 3 1 3.J6 3N.300.000 Cover HKT-64 4 1 4.H 600.201.000 Shield HKT
More informationFLEXIBLE SHAFT COUPLINGS
FLEXIBLE JAW - SPIDER PERFORMANCE DATA Four types of elastomer designs and materials are offered to allow for flexibility in addressing specific application requirements. Standard Materials: SOX (NBR)
More informationContents Section E. Section E Contents. Series
Contents Section E Vacuum um Pumps & Blowers Series ower Tank Accessories Section E.1 ASME Code Float Level Indicators... E.1.2 Non-Code Float Level Indicators... E.1.4 Sight Eye Assemblies and Parts...
More informationROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
More informationPowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
More informationACCUDRIVE PRECISION PRODUCTS
ACCUDRIVE SERIES S ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family of AccuDrive Precision Products. Series W Precision Servo Gearhead Output
More informationFRICK TIMBER TIGER SAWMILLS SIZES: 0 0C
FRICK TIMBER TIGER SAWMILLS SIZES: 0 0C SERVICE S LIST PAGE 2 TIMBER TIGER 0 AND 0C SAWMILLS HOW TO USE S LIST This Parts List provides identification of Frick Timber Tiger s 0 and 0C Standard Sawmills
More informationAFTERMARKET MOTOR & ACCESSORIES GUIDE
AFTERMARKET MOTOR & ACCESSORIES GUIDE Your FAST Parts distributor has a full line of reliable replacement aftermarket motors & accessories at affordable prices. FAST Parts International Comfort Products
More informationoptibelt KS V-Grooved Pulleys - Balancing, Surcharges for Finished Bores
optibet KS V-Grooved Pueys - Baancing, Surcharges for Bores 1 2 3 4 5 6 7 8 9 10 11 Baancing: The ist prices appy, as per VDI 2060, to cast iron pueys baanced in one pane as foows: Grade G 16 for Ø d d
More informationFOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationGATES INDUSTRIAL BELT PRODUCTS June 2012
Table of Contents PREVENTIVE MAINTENANCE TOOLS PAGE Krikit Gauges...1 Pencil Type Tension Tester...1 Double Barrel Tension Tester...1 Five Barrel Tension Tester...1 Sonic Tension Meter and Accessories...1
More informationDIST. AUTORIZADO MEX (55) QRO (442) MTY (81)
DIST. AUTORIZADO About WPT Since 992! As an international manufacturer of pneumatic and hydraulic power take-off s, clutches and brakes for a broad range of industrial and petroleum applications, WPT Power
More informationRatio Multipliers. A Regal Brand
Ratio Multipliers A Regal Brand Driven to be the Best Ratio Multipliers Dual purpose design can be used as a stand alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear
More informationMaska is proud to now be part of Baldor. You could say it is A Perfect Fit.
Maska is proud to now be part of Baldor. You could say it is A Perfect Fit. www.baldor.com www.maskapulleys.com industrial applications special applications & MTO (madetoorder) products Maska Products
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationServing Industrial Markets Since 1961:
Full Line Brochure Clutches Brakes Clutch Brakes Caliper Brakes & Rotors Torque Limiters Air Shaft Seals Sheaves Serving Industrial Markets Since 1961: Food Processing & Packaging Material Handling Printing
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw
More informationTiming Belts
Timing Belts www.medway-uk.com 1 Timing Belts Imperial Product Description The MEDWAY classical timing belt (synchronous) has a trapezoidal tooth profile providing a positive drive by the meshing of belt
More informationwww.martinsprocket.com AK Single Groove FHP Sheaves Bored-To-Size Martin Datum Pitch L Weight Part A(4L) 3L Stock Finished Bores Thru Lbs. Number OD Belts Belts Type Includes Keyway and Setscrew F E Bore
More informationSpecifications Information and Repair Parts Manual , , , &
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
More informationVIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432
Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J
More informationElectro Clutches and Brakes Shaft Mounted Clutches and Brakes
E/E Series Electro lutches and rakes Shaft Mounted lutches and rakes Shaft Mounted lutches E Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any through shaft
More informationPulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationQT Power Chain Sprockets & Belts
QT Power Chain Sprockets & Belts C2 Requires little retensioning Abrasion resistant Less drive maintenance P-1686-TBW 3/18... TB Wood s 888-829-6637 C2-1 QT Power Chain Sprocket 8M Dimensions SPROCKET
More informationFARM PRODUCTS & ACCESSORIES
FARM PRODUCTS & ACCESSORIES Farm Products & Accessories Features... Q-2 Safety Warnings... Q-4, Q-11 P. T. O. Adaptors Splined Standard Duty to 75 HP... Q-6 Splined Heavy Duty to 125 HP... Q-6 Kwik-D-Tach
More informationSTANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
More informationSafety Chuck CSB25P, CSB25F, CSB50P, CSB50F, CSB75P, CSB75F, CSB125P, CSB125F CSB150P, CSB150F, CSB175P, CSB175F
Web Control s Technical Data Sheet Safety Chuck CSB5P, CSB5F, CSB50P, CSB50F, CSB75P, CSB75F, CSB15P, CSB15F CSB150P, CSB150F, CSB175P, CSB175F Nexen's line of rugged safety chucks provide roll shaft support
More informationShaft Mounted Speed Reducer Selection
GEARBOX SELECTION PROCEDURE (a) Service Factor From Table 1 select the service factor applicable to the drive. (b) Design Power Multiply the absorbed power (or motor power if absorbed power not known)
More informationTPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
More informationENGINEERING CHAIN DIVISION
Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick.
More informationVibration Isolators (6) Galvanized Wheel. Sealed Ball Bearing. Standard Duct Size Inlet Ring
The Lau FGP Series Blower is perfect for use in ventilating, exhausting, air conditioning, processing and general industrial applications. Cold Rolled Steel: all welded construction with painted enamel
More informationDrop Forged Chain For Conveyors & Elevators
Drop Forged Chain For Conveyors & Elevators Quality Components for Chain Conveyors & Elevators Introduction Members of the Schenck Process Group, Stock Redler Ltd are leading providers of feeding, automation
More informationDODGE MECHANICAL. Grain industry Delivering solutions that solve industry challenges
DODGE MECHANICAL Grain industry Delivering solutions that solve industry challenges 2 GRAIN INDUSTRY DELIVERING SOLUTIONS THAT SOLVE INDUSTRY CHALLENGES Mechanical power transmission products We help feed
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationFLEXIBLE DRIVE COUPLINGS
To order this part, call Lifco Hydraulics USA Toll Free at -800-92-849 V C Why You Should Specify Vescor Flexible s. Vescor uses stronger materials. Because flexible couplings are subjected to constant
More informationProduct Brochure. Dodge drive components
Product Brochure Dodge drive components 2 ABB Motors and Generators Dodge drive components We provide motors, generators and mechanical power transmission products, services and expertise to save energy
More informationLSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION
Metric Bushings Specifications M is for Metric RCM LSM SFM SFXM LM PM HM HLM SPM NM SCM FGM HGM SPECIFICATIONS and TECHNICAL INFORMATION BUSHING INFORMATION Application Information is listed on the specific
More information