Features/Benefits...G2-3. Specifications...G2-7. Nomenclature...G2-8. Easy Selection...G2-9

Transcription

1 CONTENTS Features/Benefits...G2-3 Gearing Reference Specifications...G2-7 Nomenclature...G2-8 Easy Selection...G2-9 Selection Selection...G2-12 pplication and Class Numbers...G2-14 Class I Selections...G2-15 Class II Selections...G2-21 Class III Selections...G2-26 Selection/Dimensions T0107L Taper Bushed Reducers and ccessories...g2-32 Screw Conveyor Drive Reducers and ccessories...g2-34 Mount Dimensions...G2-36 T1107H Tapered Bushed Reducers and ccessories...g2-40 Screw Conveyor Drive Reducers and ccessories...g2-42 Mount Dimensions...G2-44 T2115H Taper Bushed Reducers and ccessories...g2-48 Screw Conveyor Drive Reducers and ccessories...g2-50 Mount Dimensions...G2-52 T3203H Taper Bushed Reducers and ccessories...g2-56 Screw Conveyor Drive Reducers and ccessories...g2-58 Mount Dimensions...G2-60 T4207H Taper Bushed Reducers and ccessories...g2-64 Screw Conveyor Drive Reducers and ccessories...g2-66 Mount Dimensions...G2-68 T5215H Taper Bushed Reducers and ccessories...g2-72 Screw Conveyor Drive Reducers and ccessories...g2-74 Mount Dimensions...G2-76 T6307H Taper Bushed Reducers and ccessories...g2-80 Screw Conveyor Drive Reducers and ccessories...g2-82 Mount Dimensions...G2-84 Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-1

2 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index CONTENTS T7315H Taper Bushed Reducers and ccessories...g2-88 Screw Conveyor Drive Reducers and ccessories...g2-90 Mount Dimensions...G2-92 T8407H Taper Bushed Reducers and ccessories...g2-96 Mount Dimensions...G2-98 T9415H Taper Bushed Reducers and ccessories...g2-102 Mount Dimensions...G2-104 T10507H Taper Bushed Reducers and ccessories...g2-106 Mount Dimensions...G2-108 T12608H Taper Bushed Reducers and ccessories...g2-110 Mount Dimensions...G2-112 Belt Guard Dimensions - T0107L - T5215H...G2-114 Belt Guard Dimensions - T6307H - T12608H...G2-116 Cooling Fan Dimensions - T4207H - T12608H...G2-118 Related Products Harsh Duty ccessories...g2-119 Maximum Bore Straight Bore T II Reducers...G2-121 Nominal Sheave Ratios...G2-122 Nominal Sheave Speeds...G2-124 Renewal Parts...G2-125 Engineering/Technical NEM and T II Reducer Information, Backstop Lift-off Speed...G2-127 Maximum Input and Output Speeds...G2-128 Thrust Capacity for Screw Conveyor Drives...G2-129 Lubrication of Torque-rm II Reducers...G2-130 Viscosity Classification Equivalents...G2-135 Bearing L-10 Life as a Function of Service Factor...G2-136 G2-2

3 FETURES/BENEFITS The Legacy Continues Gearing Reference With 65 years of proven dependability and more than 2 million units in service throughout the world, Dodge Torque-rm speed reducers are the standard of the industry. Now, that legacy continues with the newest generation in shaft mounted speed reducers - Torque- rm II - offering patented innovations, new features, plus increased torque and horsepower ratings. Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-3

4 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index FETURES/BENEFITS The Legacy Continues The Dodge Torque-rm II surpasses all other reducers on the market because of its industry proven design and patented features. This powerful line of shaft mounted speed reducers - in 12 case sizes through 700 horsepower (HP) - offers unparalleled torque ratings and is quickly becoming the new industry standard. Improved features include: an all-new backstop concept, a patented sealing ]system, a steel motor mount system, a state-of-the-art, totally modular design with an expanded ratio range to 40:1, and a patented twin tapered bushing system. The increased ratings of the Torque-rm II line are comparable to the next larger sized TXT reducer and are the result of the extended gear centers, wider gear faces, and optimized tooth geometry. The backstop design features centrifugal lift-off sprags for extended life and can be used with lubricants containing EP additives. In addition, the Torque-rm II line has a patented, premium sealing system that uses a harsh duty oil seal protected by a metal excluder seal with rubbing lip. This harsh duty sealing system makes this reducer series a perfect fit for today s harsh duty industries such as aggregates, mining, cement, asphalt, mixing & milling and ethanol. The steel motor mount adjusts to multiple center distances and mounts in shaft mount and screw conveyor positions. Its patented twin tapered bushing system - in standard length, short shaft, and metric versions - offers all the features of our standard twin tapered Torque-rm bushing design which are unique to Dodge. The patented insertable tapered wedge enables the optional extended tapered bushing kit to be applied for shorter shaft lengths, allowing the replacement of straight bore or single bushed reducers. Product Capabilities Twelve reducer sizes with modular accessories ll reducers can be shaft mounted, screw conveyor, vertical and flange mounted HP through 700 and torque ratings through 500,000 lb. in Standard 5, 9, 15, 25 and up to 40:1 gear ratios Nearly 300:1 speed reduction with V belt drives Bushing bores 1 inch through 7 inches ll new highly efficient helical gearing design Meets or exceeds GM standards including 5,000 hour L-10 bearing life, 25,000 average life Smooth, rugged class 30 cast iron housings with pry slots 36 month - 18 month warranty protection Complete Metric T II product line available T II products in conformance to TEX directive 94//9/EC guidelines Premium HNBR oil sealing system and filter breather Shaft mounted reducer with twin tapered bushing and motor mount Screw conveyor drive with adapter, drive shaft and motor mount G2-4

5 FETURES/BENEFITS The Legacy Continues Dodge Torque-rm II has been engineered throughout with features designed to improve performance, extend service life, and reduce or simplify maintenance. Extended gear centers and increased gear tooth contact provide dramatically increased torque and horsepower ratings. Magnetic drain plug and filter air breather are standard. Three large pry slots make rebuilding easy. Proven, GM-rated, case-carburized gear design ensures high efficiency. Has Class I starting load capability of 200% Totally modular construction, one reducer for shaft mount, screw conveyor, vertical and flange mount applications. Premium harsh duty oil seals are protected by a patented labyrinth metal shield and excluder lip auxiliary seal on all shafts. No lubrication required. Factory tested. 100% cast iron housing (Class 30) eliminates bearing cap leak paths and maximizes surface area for heat dissipation. Patented twin tapered bushings are available in standard, patented short shaft, and metric versions. Heavy duty tapered roller bearings provide 25,000 hours average life and 5,000 L-10 minimum hours life even in the heaviest load conditions. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-5

6 Gearing Reference MOTORIZED FETURES/BENEFITS The Legacy Continues Shaft Mounted Standard Twin Tapered Bushing System is an easy on, easy off, nowobble bushing system featuring a fully split, ductile iron 8 taper and reliable twin support. vailable in inch and metric bores. Increased bore capability in many sizes. Screw Conveyor The CEM Bolt-On dapter features doublelip seals on both surfaces. The adapter center is open for contaminate drop out for optimized sealing. Our Short-Shaft Twin-Tapered Bushing Kits eliminate the need for full-length shafts. Constructed with ductile iron, it has all the features of our standard bushing system. vailable in both inch and metric bores. n optional djustable Packing Kit bolts to the standard adapter and provides a proven sealing option for hostile environments. Packing can be retightened. TORQUE-RM Engineering System-1 Part Number Index This Modular Mount is attached and supported by two angle iron brackets with equally spaced holes, which align with the spacing of the cast slots of the gear case. This way, the motor mount can be adjusted up or down depending on the customer s requirements. It can also be mounted on the side of the reducer for screw conveyor applications. This Backstop option helps prevent reverse rotation in high stop-start loads, and results in less wear and longer life. Its centrifugal throw-out design eliminates sprag sliding and reduces wear. It operates with standard and EP lubricants and requires no external lubrication. Ruggedly constructed, the T Rod Kit includes standard brackets, functions as a belt-tensioning device, and offers universal mounting options. The screw conveyor drive shafts are made from high alloy steel and engineered to CEM dimensions. They are three-bolt drilled and their tapered fit ensures simple installation. The rugged locking plate (patent pending) also provides a mechanical shaft removal feature. #316 Stainless Steel drive shafts also available. This complete Bolt-On Belt Guard Package requires no drilling or straps. It allows multiple height adjustments, and has an open metal inspection feature. Other accessories include cooling fans and harsh duty breather kits. G2-6

7 SPECIFICTIONS Torque-rm II Speed Reducers: The speed reducer shall be either a belt driven or direct coupled enclosed shaft mount type unit with a single or double reduction ratio. The reducer shall mount directly on the driven shaft and utilize an adjustable torque arm that attaches from the gear case to the support structure or foundation. Optional all steel motor mount adjusts to various belt center distances and supports the motor. The reducer housing shall be constructed of two piece corrosion resistant, class 30 gray iron. ll housings shall be doweled and precision machined to assure accurate alignment for all gear sets. Pry slots are provided for ease of repair. ll gearing shall be of helical design, case carburized and precision finished to insure a high surface durability with a resilient tooth core for impact resistance and optimum service life. Gears shall be supported between bearings to maintain proper alignment of gear meshes, maximize load carrying capabilities, and to eliminate overhung loads imposed on bearings. Design meets or exceed GM standards. Screw Conveyor Drives: The drive shall consist of a standard speed reducer; a cast iron, bolt on, four bolt mounting adapter with double lip seals on both ends, and optional bolt on adjustable packing kit. standard three-hole drive shaft will be machined from a high quality alloy steel. General Specifications Reducer bearings shall be of the tapered roller type, meet or exceed GM standards, and provide a 25,000 hour average life, a 5,000 L-10 GM Class I standard. ll seals shall be of the lip, spring loaded type, made of a premium harsh duty, heat resistant material. metal excluder seal with rubber Iip is external to the standard oil seal. Reducer installation shall be accomplished by using ductile iron, fully split, two bushing system. Reducer removal shall be accomplished by providing jack screw holes in the bushing flanges to mechanically remove the tapered assembly. Backstops should be lift-off sprag type designed for use with standard and extreme pressure (EP) lubricants. The drive shall conform to Conveyor Equipment Manufacturers ssociation (CEM) standards. Optional all steel motor mount adjusts to various belt center distances and supports the motor. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-7

8 Gearing Reference MOTORIZED NOMENCLTURE Shaft Mount Reducer Drive ccessories T1107R T1107 Rod ssembly Basic Torque-rm II Reducer T1107H25 T - Torque-rm II Shaft Mount Reducer 1- Case Size GM Code reference & Traditional Bore Size H - Heavy Duty Rating & Extended Bore Size 25 - Nominal Reducer Ration Screw Conveyor Drive ccessories T1107SC T1107SC Screw Conveyor Standard dapter & Hardware Kit (Does not include shaft) TORQUE-RM Engineering System-1 Part Number Index T1107TB x 1-7/16 T1107TB x 1-7/16 Twin Tapered Bushing Kit for Standard Length Driven Shaft T1107TBS x 1/7-16 T1107TB x 1-7/16 Twin Tapered Bushing Kit for Short Driven Shaft T1107MM T1107MM Mount ssembly Other ccessories T1107BS Backstop ssembly T4207CF Cooling Fan ssembly T1-4 FB KIT Filter Breather Kit T1107SCP Kit T11070SCP Screw djustable Packing Kit (Does not include shaft) T1107SCS x 1-7/16 T11070SCS Screw Conveyor Drive Shaft x 1-7/17 Diameter T1107BG T1107BG Belt Guard G2-8

9 ESY SELECTION Easy Selection Method (For Electric s) For Torque-rm II Reducer nd Screw Conveyor Drive Reducer pplications Gearing Reference When to Use Easy Selection The Easy Selection tables for T II Shaft Mount reducers are for electric motor selections up to 400 horsepower with output speeds up to 400 RPM, using GM recommended application class numbers. For extreme shock or high energy loads which must be absorbed, as when stalling; for a power source other than an electric motor; or for extreme ambient temperatures or oversized equipment, consult Dodge pplication Engineering, How to Select Step 1: Determine Class of Service - See Table 1 to determine Load Classification for applications under normal conditions. Find the type application and duty cycle. Class 1 - Steady load not exceeding HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent. For Class 1 applications, the maximum value of starting and momentary peak loads should not exceed 2 x HP rating. If it exceeds this amount it should be divided by 2 and the result used in the selection table instead of the HP rating. Class 2 - Steady load not exceeding HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. For Class 2 applications, the maximum value of starting and momentary peak loads should not exceed 2.8 x HP rating. If it exceeds this amount it should be divided by 2.8 and the result used in the selection table instead of the HP rating. Class 3 - Moderate shock loads for over 10 hours a day. Heavy shock loads are allowable during 10 hours a day. For Class 3 applications, the maximum value of starting and momentary peak loads should not exceed 4 x HP rating. If it exceeds this amount it should be divided by 4 and the result used in the selection table instead of the HP rating. Step 2: Determine Reducer Size - From the Easy Selection, Class I, II or III, Tables, pages G2-15 thru G2-30, find the reducer size for the application horsepower and output speed. Note: For applications where fan cooling is not acceptable, use the Easy Selection tables with an increased Class of Service number. Where more than one reducer selection is listed, the most economical ratio is generally listed first. See Engineering/Technical pages for maximum input speed, output speed, and thrust capacity ratings for T II reducers. Step 3: Compare Hollow Shaft Bore with the size of the driven shaft. ll Dodge T II Taper Bushed reducers require bushings to mount reducer to driven shaft. Refer to reducer pages for available bushings. If the driven shaft is larger than the bore of the selected reducers, the shaft must be machined to the proper size, or select a larger reducer. Check driven shaft and key for strength. Step 4: Check Dimensions - See Selection/ Dimension pages for reducer dimensions, weights, part numbers and Torque-rm rod mounting positions. See Engineering/ Technical pages for reducer mounting positions. Step 5: Select a Belt Drive rrangement - From the Sheave ratio information, pages G2-122 thru G2-124, select a sheave ratio for the belt drive. The reducer sheave P.D., Pitch Diameter, should not be smaller than the mini mum sheave diameter shown in the selection tables. Note: Mount the sheave as close as possible to the reducer to minimize the effect of overhung load on the reducer. See Dodge Drives Components catalog to select sheaves, bushings and belts for the appropriate belt drive. Step- 6: Select ccessories - See Selection/Dimensions pages for description, dimensions, weights and part numbers for accessories for the T II reducer selected: Rod ssembly Bushing Kit Mount Backstop ssembly Belt Guard Cooling Fan Screw Conveyor dapter djustable Packing Kit Drive Shaft Harsh Duty Breathers Vertical Breather Kit Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-9

10 Gearing Reference ESY SELECTION Easy Selection Method (For Electric s) For Torque-rm II Reducer nd Screw Conveyor Drive Reducer pplications MOTORIZED Note: Important Information T II reducers are stocked without a Torque-rm Rod ssembly. Order a T Rod ssembly as a separate item. T II reducers are shipped without oil. They must be lubricated at time of installation. T II reducers are suitable, from stock, for vertical or incline mounting and flange mounting; no reducer modification is required. See accessories for vertical breather kit. T II Backstop - For best life, select reducer gear ratios which exceed input shaft speeds required for backstop sprag lift-off. See page G1-127 for Backstop Lift-off speeds. Warning: Backstops are not recommended for applications involving energy absorption and shock or torque loads in excess of reducer ratings or on applications such as chair lift, amusement rides, etc., where the safety of persons or property is dependent on their function. On such applications, other safety devices should be provided. Note: The T II reducer has built-in auxiliary sealing which gives extra seal protection for all environments, at no additional cost to the user. See the Feature/Benefits pages for details. Example: Easy Selection Method For Torque-rm II Reducers - Shaft Mount nd Screw Conveyor Drive TORQUE-RM Engineering System-1 Part Number Index Shaft Mount Reducer pplication: 10 HP 1750 RPM motor is used to drive a belt conveyor moving sand at 70 RPM. The conveyor is uniformly loaded and operates 16 hours per day. The head pulley shaft diameter is 2-3/16. The user specifications call for a means of holding the conveyor from moving backwards. Step 1: Determine Class of Service - From Table 1 on page G2-12 locate the appropriate application, belt conveyors, uniformly loaded or fed for over 10 hours per day. This load is classified as a Class II application. Step 2: Determine Reducer Size - From Class II Selection, page G2-22, find the column for 10 HP and read down to 70 RPM. reducer size T3203H25 or T3203H15 reducer is the correct selection. See Engineering/ Technical pages to compare input and output speed and overhung load application requirements with reducer ratings. Step 3: Compare Hollow Shaft Bore of a size T3203H25 or T3203H15 with the head pulley shaft diameter. Per page G2-57, 2-3/16 is a bore available for this size of reducer. It will work in this application. Be sure to check the driven shaft and key for strength. Step 4: Check Dimensions and Weights -See Selection/ Dimension pages for reducer dimensions, weights, part numbers and other pertinent drive dimensions, as well as information on Torque-rm rod mounting positions. See Engineering/Technical pages for information on reducer mounting positions. Step 5: Select a Belt Drive - From the Sheave Ratio information, pages G2-122 thru G2-124, select a belt drive ratio for the conveyor speed of 70 RPM. Then select a belt drive, from the Dodge Drive components catalog, that meets the customer s needs (service factor, minimum number of belts) and preferences (belt style, bushing mounting style, etc.) The sheave diameters must not be smaller than the minimum diameters shown in the selection tables. Step 6: Select ccessories - See Selection/Dimensions pages to pick out accessories for this application: T3203BS Backstop ssembly, to hold the conveyor from moving backwards. T3203MM Mount ssembly, for top mounting the motor to the reducer. T3203BG - Pos. B Belt Guard, to cover and protect the rotating belt drive. G2-10

11 ESY SELECTION Easy Selection Method (For Electric s) For Torque-rm II Reducer nd Screw Conveyor Drive Reducer pplications Gearing Reference Example: Easy Selection Method For Torque-rm II Reducers - Shaft Mount nd Screw Conveyor Drive Screw Conveyor Drive Reducer pplication: 5 HP 1750 RPM motor is used to drive a heavy duty screw conveyor moving at 72 RPM. The conveyor runs 10 hours per day in a local feed mill conveying grain. The user needs a reducer drive compatible with a CEM 12 diameter screw and a 2-7/16 diameter drive shaft. Step 1: Determine Class of Service - From Table 1 page G2-12, locate the appropriate application, conveyors, general purpose; screw conveyor - heavy duty, not uniformly loaded for 3 to 10 hours per day. This load is classified as a Class II application. Step 2: Determine Reducer Size - From Class II Selection Table, page G2-22, find the column for 5 HP and read down to 72 RPM. T1107H25 reducer is the correct selection. See Engineering/Technical pages to compare input and output speed and overhung load application requirements with reducer ratings. Step 3: Check Dimensions - See Selection/Dimensions pages for reducer dimensions, weights, part numbers and other pertinent drive dimensions. See Engineering/ Technical pages for information on reducer mounting positions. Step 4: Select Drive Shaft to fit screw diameter. See Selection/ Dimension page G2-43. Here we verify that a 2-7/16 diameter drive shaft is compatible with a 12 diameter screw. Step 5: Select a Belt Drive - From the Sheave Ratio information, pages G2-122 thru G2-124, select a belt drive ratio for the conveyor speed of 70 RPM. Then select a belt drive, from the Dodge Drive components catalog, that meets the customer s needs (service factor, minimum number of belts) and preferences (belt style, bushing mounting style, etc.) The sheave diameters must not be smaller than the minimum diameters shown in the selection tables. Step 6: Select ccessories - See Selection/Dimensions pages to pick out screw conveyor accessories for this application. T1107SC dapter & Hardware Kit, to mount reducer to trough end of screw conveyor. T1107SCP djustable Packing Kit, to add additional sealing protection to reducer drive. T1107MM Mount ssembly, for top mounting of motor to the reducer. T1107BG-Pos. C Belt Guard, to cover and protect the rotating belt drive. T1107SCS X 2-7/16 Drive Shaft, to connect the reducer to the screw conveyor. Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-11

12 Gearing Reference SELECTION Selection : T II Torque-rm Shaft Mount Reducers This is a reference sheet for quick selection and specification of Dodge torque-arm shaft mount reducers. Use it to identify information needed to make an accurate selection with a step-by-step selection format for choosing reducers, accessories and belt drive. MOTORIZED TORQUE-RM Engineering System-1 Part Number Index Name Phone No. Company Name Fax. No. pplication Data: Type of Driven Equipment Hours of service per day Class of Service Type of Load: Uniform Moderate Shock Type: HP RPM Frame Size Shaft Size RPM of Driven Equipment Driven Shaft Size Type of Reducer Mounting: Horizontal Vertical: Input Up Input Down Incline (Degree of) Unusual mbient Temperature Other Pertinent pplication Characteristics (i.e.-dusty Environment, Reversing Duty, Start/Stop Cycles. Etc.) Reducer Driver Selection Step 1 - Determine Class of Service Step 2 - From ppropriate Service Class Table, Select Reducer Size nd Ration That Meets pplication HP nd Driven RPM Requirements: Twin Taper Bushed Short Shaft Twin Tapered Step 3 - Select Reducer ccessories Required For pplication: Mount: Tie Rod: Backstop: Belt Guard: Cooling Fan: Bushing Cover: Harsh Duty Breather: Other: Belt Drive Specification: Service Factor Belt Drive Ratio Needed Belt Center Distance Type of Belt Desired Driver: Shaft Diameter Driven: Shaft Diameter Sheave Sheave Bushing Bushing Belts: Size Quantity G2-12

13 SELECTION Screw Conveyor Shaft Mount Speed Reducers Selection : T II Screw Conveyor Drive Reducers This is a handy reference sheet for quick selection and specification of Dodge screw conveyor drive reducers. Use it to identify information needed to make an accurate selection with a step-by-step selection format for choosing reducer, accessories and v-drive. Use this page to make your own selections or send this form, with application data to Dodge for assistance. Gearing Reference Name Phone No. Company Name Fax. No. pplication Data: Type of Driven Equipment Hours of Service Per Day Class of Service Type of Load: Uniform Moderate Shock Type: HP RPM Frame Size Shaft Size Screw Conveyor RPM Drive Shaft Diameter nd Type dapter Type Unusual mbient Temperature Other Pertinent pplication Characteristics (i.e. - Dusty Environment, Reversing Duty, Start/Stop Cycles, Etc.) Reducer Drive Selection: Step 1 Determine Class of Service Step 2 From ppropriate Service Class Table, Select Reducer Size nd Rotation That Meets pplication HP and Driven RPM Requirements Step 3 Select Drive Shaft With Diameter To Fit Screw Size Determine Type Of Drive Shaft Needed: 3-Hole Standard 3-Hole Stainless Step 4 Select dapter: Standard djustable Packing Kit Step 5 Select accessories required for application: Mount: Belt Guard: Cooling Fan: Bushing Cover: Harsh Duty Breather: Other: V-Belt Drive Specification: Service Factor V-Belt Drive Ratio Needed Belt Center Distance Type of Belt Desired Driver: Shaft Diameter Driven: Shaft Diameter Sheave Sheave Bushing Bushing Belts: Size Quantity Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-13

14 Gearing Reference SELECTION pplication Classification nd Class Numbers MOTORIZED For pplication Class and Service, please see pages G1-6 through G1-12. TORQUE-RM Engineering System-1 Part Number Index G2-14

15 SELECTION Class I Selections (SF = 1.0) HP 1/4 1/3 1/2 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L See Page G2-132 for lubrication for 15 RPM and slower HP 3/ /2 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H HP 1-1/2 (cont) 2 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T2115H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-15

16 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class I Selections (SF = 1.0) HP 3 5 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H See Page G2-132 for lubrication for 15 RPM and slower HP 5 (cont) 7-1/2 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T1107H T0107L T0107L T0107L HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T2115H T2115H T1107H T1107H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T10507H T10507H T10507H T9415H T9415H T9415H G2-16

17 SELECTION Class I Selections (SF = 1.0) HP 15 (cont) 20 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T3203H T2115H T3203H T2115H T2115H T2115H T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H See Page G2-132 for lubrication for 15 RPM and slower See page G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers HP 20 (cont) 25 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T4207H T4207H T3203H T4207H T4207H T3203H T3203H T3203H T3203H T2115H T3203H T3203H T2115H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H HP 25 (cont) 30 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T3203H T3203H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T4207H Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-17

18 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class I Selections (SF = 1.0) HP 30 (cont) 40 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D T4207H T4207H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H * See Page G2-132 for lubrication for 15 RPM and slower See page G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers HP 40 (cont) 50 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T4207H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H T9415H T9415H T9415H T9415H T8407H Fan T8407H T8407H T8407H T8407H T8407H T7315H T7315H T7315H T6307H Fan 50 T6307H T6307H T6307H T6307H T5215H Fan T5215H T5215H T5215H T5215H T5215H T6307H HP 50 (cont) 60 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan 19 T9415H Fan T9415H T9415H Fan T9415H T9415H T8407H Fan T8407H Fan T8407H T8407H Fan T8407H T8407H T7315H Fan T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T5215H Fan T6307H T5215H T6307H T6307H T5215H T5215H T5215H Fan T5215H T5215H T6307H G2-18

19 SELECTION Class I Selections (SF = 1.0) HP 60 (cont) 75 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D T5215H T5215H T5215H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H Fan T9415H T8407H Fan T8407H Fan T8407H Fan T8407H Fan T8407H Fan T8407H T7315H Fan 50 T7315H Fan T7315H T7315H Fan T7315H T6307H Fan T6307H Fan T6307H Fan T6307H Fan T6307H Fan T6307H Fan T7315H T6307H Fan T6307H Fan T6307H T6307H Fan T6307H T5215H T6307H T5215H Fan T6307H T6307H T5215H * See Page G2-132 for lubrication for 15 RPM and slower See page G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers P&C (Pump & Coolers) - Use the Dodge Speed Reducer auxiliary cooling package, part number HP Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method 6-11 TDT TDT T12608H Fan T12608H T12608H T12608H T12608H T12608H T10507H Fan T10507H Fan T10507H T10507H Fan T10507H T10507H T9415H Fan T9415H Fan T9415H Fan T8407H Fan T8407H Fan T8407H Fan T8407H Fan T8407H Fan T7315H Fan T7315H Fan T7315H Fan T7315H Fan 111 T6307H Fan T6307H Fan T6307H Fan T6307H Fan T7315H T6307H Fan T7315H T6307H Fan T6307H T6307H TDT TDT T12608H Fan T12608H Fan T12608H Fan T12608H Fan T12608H Fan T12608H T10507H Fan 29 T12608H Fan T12608H T10507H Fan T10507H Fan T10507H Fan HP 125 (cont) Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T9415H P&C T9415H P&C T9415H Fan T9415H P&C T9415H Fan T8407H P&C T8407H Fan T8407H Fan T7315H Fan T7315H Fan T7315H Fan T7315H Fan T6307H Fan T6307H Fan T7315H T7315H T6307H T6307H Fan 9-17 TDT TDT T12608H P&C T12608H Fan T12608H Fan T12608H Fan T10507H P&C T12608H Fan T12608H Fan T10507H P&C T10507H Fan T10507H T9415H P&C 50 T9415H P&C T9415H Fan T9415H P&C T9415H Fan T8407H P&C T8407H Fan T8407H Fan 113 T7315H Fan T7315H Fan T7315H Fan T7315H Fan T7315H TDT TDT T12608H P&C T12608H Fan T12608H Fan T10507H P&C T12608H P&C T12608H Fan Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-19

20 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class I Selections (SF = 1.0) HP 200 (cont) Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. 51 T12608H Fan T12608H Fan T10507H P&C T10507H Fan 68 T9415H P&C T10507H Fan T9415H P&C T9415H P&C T9415H P&C T8407H P&C T7315H P&C T7315H Fan TDT TDT Fan T12608H P&C T12608H P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C T10507H P&C T10507H P&C T10507H P&C T10507H P&C T9415H P&C TDT TDT P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C T9415H P&C TDT Fan TDT P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C TDT Fan TDT P&C T12608H P&C T12608H P&C T12608H P&C TDT P&C TDT Fan TDT P&C T12608H P&C TDT P&C TDT P&C T12608H P&C HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D TDT P&C TDT P&C * See Page G2-132 for lubrication for 15 RPM and slower See page G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers P&C (Pump & Coolers) - Use the Dodge Speed Reducer auxiliary cooling package, part number G2-20

21 SELECTION Class II Selections (SF = 1.4) HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T1107H T1107H T1107H T0107L T0107L T0107L / T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T1107H T1107H T1107H T0107L T0107L T0107L / T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L /2 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T3203H /4 4-5 T3203H T3203H * See Page G2-132 for lubrication for 15 RPM and slower HP 3/4 (cont) 1 1-1/2 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H HP 1-1/2 (cont) 2 3 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-21

22 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class II Selections (SF = 1.4) HP 3 (cont) 5 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T1107H T0107L T0107L T0107L * See Page G2-132 for lubrication for 15 RPM and slower HP 7-1/2 10 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T2115H T2115H T1107H T1107H T2115H T1107H T2115H T1107H T1107H T1107H T0107L T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H HP 10 (cont) 15 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T3203H T2115H T3203H T2115H T2115H T1107H T2115H T2115H T1107H T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T3203H T4207H T3203H T3203H G2-22

23 SELECTION Class II Selections (SF = 1.4) HP 15 (cont) 20 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T3203H T3203H T5215H T3203H T3203H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T3203H T3203H T2115H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T5215H T4207H T3203H T5215H T3203H T5215H T3203H T4207H * See Page G2-132 for lubrication for 15 RPM and slower See Pages G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers HP 20 (cont) Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D T3203H T3203H T3203H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H HP 30 (cont) 40 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T7315H T6307H T6307H T5215H T5215H T5215H T6307H T5215H T5215H T5215H T5215H T6307H Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-23

24 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class II Selections (SF = 1.4) HP Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T5215H T5215H T5215H T5215H T5215H (cont) T4207H T5215H T5215H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T8407H Fan T8407H T8407H T7315H T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T6307H T7315H T6307H T6307H T6307H T6307H T5215H T6307H T5215H T5215H T6307H T5215H T6307H T5215H T5215H T5215H * See Page G2-132 for lubrication for 15 RPM and slower See page G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. 5-9 TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H T9415H T8407H Fan T8407H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T6307H T6307H T7315H T6307H T7315H T6307H T6307H T6307H Fan T6307H T5215H T6307H T6307H T5215H TDT TDT T12608H T12608H T12608H T10507H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H Fan T9415H T8407H Fan 49 T8407H Fan T9415H T8407H Fan 50 T8407H Fan T8407H T8407H Fan T8407H T7315H Fan T7315H HP 75 (cont) Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D T7315H T7315H T7315H T7315H T6307H Fan T6307H Fan T6307H Fan T7315H T6307H Fan T6307H T6307H TDT TDT T12608H T12608H T12608H T10507H Fan 33 T12608H T12608H T10507H Fan T10507H T10507H T9415H Fan T9415H Fan T9415H Fan T9415H Fan T9415H Fan T8407H Fan T8407H Fan T8407H Fan 103 T7315H Fan T7315H Fan T7315H Fan T7315H Fan T6307H Fan T6307H Fan T7315H T7315H T6307H TDT TDT T12608H Fan T12608H T12608H T10507H Fan T12608H T12608H T10507H Fan T10507H Fan T10507H Fan T10507H Fan T10507H Fan T9415H Fan T9415H Fan T9415H Fan T8407H Fan T7315H Fan T7315H G2-24

25 SELECTION Class II Selections (SF = 1.4) HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D TDT TDT T12608H Fan T12608H Fan T12608H Fan T12608H Fan T12608H Fan T10507H Fan T10507H Fan 72 T9415H P&C T10507H Fan T9415H P&C T9415H Fan T9415H Fan T8407H Fan T7315H Fan T7315H TDT TDT Fan T12608H P&C 50 T12608H Fan T12608H Fan T12608H Fan T12608H Fan T10507H P&C T10507H Fan T10507H Fan T9415H P&C HP 250 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D TDT TDT P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C TDT TDT P&C 300 T12608H P&C T12608H P&C T12608H P&C TDT TDT P&C T12608H P&C TDT Fan T12608H P&C TDT Fan TDT Fan * See Page G2-132 for lubrication for 15 RPM and slower See Pages G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers P&C (Pump & Coolers) - Use the Dodge Speed Reducer uxiliary cooling package, part number Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-25

26 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class III Selections (SF = 2.0) HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L /4 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L /3 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T3203H T3203H T3203H T2115H T2115H T2115H T1107H / T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L * See Page G2-132 for lubrication for 15 RPM and slower HP 1/2 (cont) 3/4 1 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T0107L T0107L T0107L T0107L T0107L T0107L T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T2115H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L HP 1 (cont) 1-1/2 2 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L G2-26

27 SELECTION Class III Selections (SF = 2.0) HP 2 (cont) 3 5 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T0107L T0107L T0107L T0107L T0107L T0107L T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T1107H T0107L T0107L T1107H T0107L T0107L T0107L T0107L T0107L T0107L T9415H T9415H T9415H T8407H T8407H T8407H * See Page G2-132 for lubrication for 15 RPM and slower See Pages G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducer HP 5 (cont) 7-1/2 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T2115H T2115H T1107H T1107H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H HP 7-1/2 (cont) 10 Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T3203H T2115H T3203H T2115H T2115H T1107H T2115H T2115H T1107H T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T4207H Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-27

28 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class III Selections (SF = 2.0) HP Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T3203H T3203H T3203H T3203H T3203H (cont) T2115H T3203H T3203H T2115H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T5215H T4207H T5215H T3203H T5215H T3203H T4207H T4207H T3203H TDT TDT T12608H TDT * See Page G2-132 for lubrication for 15 RPM and slower See Pages G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducer HP 20 (cont) 25 Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H HP 25 (cont) 30 Output RPM 50 Reducer Selection Min. Sheave Dia. P.D. Cooling Method T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T5215H T6307H T5215H T6307H T6307H T5215H T5215H T6307H T5215H T6307H T5215H T5215H G2-28

29 SELECTION Class III Selections (SF = 2.0) HP 30 (cont) Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T4207H T5215H T5215H T4207H TDT TDT T12608H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T6307H T6307H T5215H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T9415H Fan T9415H T9415H * See Page G2-132 for lubrication for 15 RPM and slower See Pages G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducer HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D. T8407H Fan T8407H T8407H T8407H T8407H T7315H T7315H (cont) T7315H T7315H T6307H T6307H T6307H T6307H T7315H T6307H T7315H T6307H T6307H T6307H TDT TDT T12608H TDT T12608H T12608H T12608H T10507H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H T9415H T9415H Fan T9415H T9415H T9415H T9415H T8407H T8407H T8407H Fan T8407H T8407H T7315H T7315H T7315H T7315H T6307H T6307H T7315H T6307H Fan T7315H T7315H T6307H HP Output RPM Reducer Selection Min. Sheave Cooling Dia. Method P.D TDT TDT T12608H T12608H T12608H T10507H T12608H T12608H T10507H T10507H T10507H T9415H Fan 50 T9415H Fan T9415H T9415H Fan T9415H T8407H Fan T8407H T8407H T7315H T7315H T7315H T7315H T7315H Fan T7315H T6307H TDT TDT T12608H T12608H T12608H T10507H Fan T12608H T12608H T12608H T12608H T10507H T10507H T10507H Fan T10507H T9415H Fan T10507H T9415H Fan T9415H Fan T9415H Fan T8407H Fan T7315H Fan T7315H TDT TDT T12608H Fan T12608H T12608H T12608H T12608H T12608H Fan T12608H Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-29

30 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION Class III Selections (SF = 2.0) HP 125 (cont) Output RPM Reducer Selection Min. Sheave Dia. P.D. Cooling Method T10507H Fan T10507H Fan T10507H Fan T9415H Fan TDT TDT TDT Fan T12608H Fan T12608H Fan T12608H Fan T10507H Fan T9415H Fan TDT TDT P&C T12608H P&C T12608H Fan T12608H Fan T12608H P&C TDT TDT P&C T12608H P&C TDT TDT * See Page G2-132 for lubrication for 15 RPM and slower See page G3-70 and G3-71 for information on TDT1425 and TDT1530 Reducers P&C (Pump & Coolers) - Use the Dodge Speed Reducer auxiliary cooling package, part number G2-30

31 SELECTION Selection : T II Torque-rm Shaft Mount Reducers nd Screw Conveyor Drives This is a reference sheet for quick selection and specification on Dodge T II Shaft Mount Reducers. Use it to identify information needed to make an accurate selection with a step-by-step selection format for choosing a reducer, accessories and belt drive. Gearing Reference Name Company Name Phone Number Fax No. ddress: pplication Data: Driven Equipment Type RPM Shaft Size Hours of service/day Class of Service Type of Load: Uniform Moderate Shock Screw Conveyor pplications: Screw Diameter Drive shaft diameter HP RPM Frame Size Shaft Size Type of reducer mounting: Horizontal Vertical - Input up Vertical - Input down Incline (degree of) Flange Mounting Unusual ambient temperature: Other important application characteristics (reversing duty, start/stop cycles) Reducer Drive Selection: Step 1 - Determine class of service Step 2 - From Class of Service Table, select reducer type, size and ratio that meets pplication HP and Driven RPM requirements Twin Taper Bushed Screw Conveyor Step 3 - Select reducer accessories required for application: Twin Taper Bushing Kit: Standard Shaft Short Shaft Rod ssembly Backstop Cooling Fan Mount Belt Guard dapter & Hardware Kit djustable Packing Kit Drive Shaft Stainless Drive Shaft Other Belt Drive Specification: Service Factor Belt Type Center Distance Sheave Ratio Driver: Shaft Diameter Sheave Bushing Belt Size & Qty Driven: Shaft Diameter Sheave Bushing Belt Size & Qty Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-31

32 Gearing Reference SELECTION/DIMENSIONS Taper Bushed Reducers - T0107L, Single nd Double Reductions MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-32

33 SELECTION/DIMENSIONS Taper Bushed Reducers - T0107L, Single nd Double Reductions T0107L Taper Bushed Reducers (1) T0107L ccessories Reducer Size Part Number GM Code ctual Ratio Weight lbs. Description Part Number T0107L S T0107R Rod ssembly (1) T0107L D T1107/0107L BS Backstop ssembly T0107L D T0107MM Mount ssembly (56-215T) (3) T0107L D T0107BG Belt Guard - Pos. B (56-215T) T0107L D T0107BG Belt Guard - Pos. C (56-215T) (4) (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. T0107L Reducer = Light duty, best value + Rod assembly mounting locations are limited to positions shown in drawing. (5) (6) T0107L Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Weight Standard Shaft Number Required Short Shaft lbs. Bushing Kit (7) (9) (10) Bushing Kit (8) Weight lbs. T0107BG Belt Guard - Pos. D (56-215T) T0-T3 Hydra-Lock Dessicant Breather Kit HLO XT Enclosed Breather System, T T0-T3 Vertical Breather Kit T0107L V-Ring Kit T0107L Lube Kit LUBEKITT Part Number Weight lbs. Shaft Keyseat (9) (10) Required T0107TB x 1-7/ /8 x 3/16 x 6.83 T0107TB x 1-3/ /16 x 5/32 x 6.83 T0107TB x 1-5/ /16 x 5/32 x 6.83 T0107TB x 1-1/ /4 x 1/8 x 6.83 T0107TB x 1-3/ /4 x 1/8 x 6.83 T0107TBS x 1-3/ /4 x 1/8 x 4.35 T0107TB x 1-1/ /4 x 1/8 x 6.83 T0107TBS x 1-1/ /4 x 1/8 x 4.35 T0107TB x /4 x 1/8 x 6.83 T0107TBS x /4 x 1/8 x 4.35 Bushing Covers See page G2-127 for input shaft speed necessary for backstop sprag lift-off. (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions. (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications. s GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Reducer Size Description Part Number Weight T0107L BS Polymer Closed (12) T0107L BS Polymer split (12) Reducer Size Description Part Number Weight T0107L luminum Closed (13) T0107L luminum Spllit (13) Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-33

34 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T0107L, Single nd Double Reductions MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-34

35 SELECTION/DIMENSIONS Screw Conveyor Drive - T0107L, Single nd Double Reductions T0107L Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2 9, / /8 12, / / /8 12, 14, 16, 18, / /4 (1) (4) (5) T0107L ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T0107SC dapter & Hardware Kit T0107SCP djustable Packing Kit (3) T0107SCS x 1-1/2 Drive Shaft T0107SCS x 2 Drive Shaft T0107SCS x 2-7/16 Drive Shaft T0107SCS x 3 Drive Shaft T0107SCS x 1-1/2 Stainless Steel Drive Shaft T0107SCS x 2 Stainless Steel Drive Shaft T0107SCS x 2-7/16 Stainless Steel Drive Shaft T0107SCS x 3 Stainless Steel Drive Shaft (1) See page G2-33 for Pos C Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-35

36 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T0107L, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-36

37 SELECTION/DIMENSIONS Mount Dimensions - T0107L, Position B & D (1) Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-37

38 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T0107L, Position & C MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-38

39 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T0107L, Position & C Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Frame Lateral djustment Mount 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim (1) For U Or Flared Trough Ends Per CEM Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-39

40 Gearing Reference SELECTION/DIMENSIONS Tapered Bushed Reducers - T1107H, Single nd Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-40

41 SELECTION/DIMENSIONS Tapered Bushed Reducers - T1107H, Single nd Double Reduction T1107H Taper Bushed Reducers (1) T1107H ccessories Reducer Size Part Number GM Code ctual Ratio Weight lbs. Description Part Number T1107H S T1107R Rod ssembly (1) T1107H D T1107H/0107L BS Backstop ssembly T1107H D T1107MM Mount ssembly (56-254T) (3) T1107H D T1107BG Belt Guard - Pos. B (56-254T) T1107H D T1107BG Belt Guard - Pos. C (56-254T) (4) (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. T1107H Reducer - Heavy duty, extended value See page G2-121 for Maximum Bore Straight Bore T II Reducers + Rod ssembly mounting locations are limited to positions show in drawing. (5) (6) T1107H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Weight Standard Shaft Number Required Short Shaft Weight lbs. T1107BG Belt Guard - Pos D (56-254T) T0-T3 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T0-T3 - Vertical Breather Kit T1107H - V-Ring Kit T1107H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications Part Number GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Weight lbs. Shaft Keyseat (9) (10) Required Bushing Kit (7) lbs. (9) (10) Bushing Kit (8) T1107TB x 1-1/ /8 x 3/16 x 6.95 T1107TB x 1-7/ /8 x 3/16 x 6.95 T1107TBS x 1-7/ /8 x 3/16 x 4.43 T1107TB x 1-3/ /16 x 5/32 x 6.95 T1107TBS x 1-3/ /16 x 5/32 x 4.43 T1107TB x 1-5/ /16 x 5/32 x 6.95 T1107TBS x 1-5/ /16 x 5/32 x 4.43 T1107TB x 1-1/ /4 x 1/8 x 6.95 T1107TBS x 1-1/ /4 x 1/8 x 4.43 T1107TB x 1-3/ /4 x 1/8 x 6.95 T1107TBS x 1-3/ /4 x 1/8 x 4.43 T1107TB x 1-1/ /4 x 1/8 x 6.95 T1107TBS x 1-1/ /4 x 1/8 x 4.43 T1107TB x 1-1/ /4 x 1/8 x 6.95 T1107TBS x 1-1/ /4 x 1/8 x 4.43 T1107TB x /4 x 1/8 x 6.95 T1107TBS x /4 x 1/8 x 4.43 Bushing Covers Reducer Size Description Part Number Weight T1107H BS Polymer Closed (12) T1107H BS Polymer split (12) Reducer Size Description Part Number Weight T1107H luminum Closed (13) T1107H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-41

42 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T1107H, Single nd Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-42

43 SELECTION/DIMENSIONS Screw Conveyor Drive - T1107H, Single nd Double Reduction T1107H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2 9, / /8 12, / / /8 12, 14, 16, 18, / /4 (1) (4) (5) T1107H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T1107SC dapter & Hardware Kit T1107SCP djustable Packing Kit (3) T1107SCS x 1-1/2 Drive Shaft T1107SCS x 2 Drive Shaft T1107SCS x 2-7/16 Drive Shaft T1107SCS x 3 Drive Shaft T1107SCS x 1-1/2 Stainless Steel Drive Shaft T1107SCS x 2 Stainless Steel Drive Shaft T1107SCS x 2-7/16 Stainless Steel Drive Shaft T1107SCS x 3 Stainless Steel Drive Shaft (1) See page G2-41 for Pos C Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-43

44 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T1107H, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-44

45 SELECTION/DIMENSIONS Mount Dimensions - T1107H, Position B & D (1) Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Mounting Position B Position D Frame Mount 182T & 184T 213T & 215T 254T Height Min Max Min Max Min Max M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-45

46 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T1107H, Position & C MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-46

47 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T1107H, Position & C Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Mounting Position Position C Frame Mount 182T & 184T 213T & 215T 254T Height Min Max Min Max Min Max M M M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim (1) For U Or Flared Trough Ends Per CEM Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-47

48 Gearing Reference SELECTION/DIMENSIONS Taper Bushed Reducer - T2115H, Single nd Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-48

49 SELECTION/DIMENSIONS Taper Bushed Reducer - T2115H, Single nd Double Reduction T2115H Taper Bushed Reducers (1) Reducer Size Part Number GM Code ctual Ratio Weight lbs. T2115H ccessories Description Part Number T2115H S T2115R Rod ssembly (1) T2115H D T2115BS Backstop ssembly T2115H D T2115MM Mount ssembly (56-256T) (3) T2115H D T2115BG Belt Guard - Pos. B (56-256T) T2115H D T2115BG Belt Guard - Pos. C (56-256T) (4) (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions show in drawing. (5) (6) T2115H Tapered Bushing Kits Bushing Size Standard Shaft Part Number (7) Weight lbs. Shaft Keyseat Required (9) (10) Weight lbs. T2115BG Belt Guard - Pos. D (56-256T) T0-T3 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T0-T3 Vertical Breather Kit T2115H V-Ring Kit T2115H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications Bushing Size Short Shaft Bushing Kit (8) Part Number GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Weight lbs. Shaft Keyseat Required (9) (10) Bushing Kit T2115TB x 2-3/ /2 x 1/4 x 7.80 T2115TB x /2 x 1/4 x 7.80 T2115TB x 1-15/ /2 x 1/4 x 7.80 T2115TBS x 1-15/ /2 x 1/4 x 4.80 T2115TB x 1-7/ /2 x 1/4 x 7.80 T2115TBS x 1-7/ /2 x 1/4 x 4.80 T2115TB x 1-3/ /8 x 3/16 x 7.80 T2115TBS x 1-3/ /8 x 3/16 x 4.80 T2115TB x 1-11/ /8 x 3/16 x 7.80 T2115TBS x 1-11/ /8 x 3/16 x 4.80 T2115TB x 1-5/ /8 x 3/16 x 7.80 T2115TBS x 1-5/ /8 x 3/16 x 4.80 T2115TB x 1-1/ /8 x 3/16 x 7.80 T2115TBS x 1-1/ /8 x 3/16 x 4.80 T2115TB x 1-7/ /8 x 3/16 x 7.80 T2115TBS x 1-7/ /8 x 3/16 x 4.80 T2115TB x 1-3/ /16 x 5/32 x 7.80 T2115TBS x 1-3/ /16 x 5/32 x 4.80 T2115TB x 1-5/ /16 x 5/32 x 7.80 T2115TBS x 1-5/ /16 x 5/32 x 4.80 Bushing Covers Reducer Size Description Part Number Weight T2115H BS Polymer Closed (12) T2115H BS Polymer split (12) Reducer Size Description Part Number Weight T2115H luminum Closed (13) T2115H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-49

50 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T2115H, Single nd Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-50

51 SELECTION/DIMENSIONS Screw Conveyor Drive - T2115H, Single nd Double Reduction T2115H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2 9, / /8 12, / / /8 12, 14, 16, 18, / /4 (1) (4) (5) T2115H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T2115SC dapter & Hardware Kit T2115SCP djustable Packing Kit (3) T2115SCS x 1-1/2 Drive Shaft T2115SCS x 2 Drive Shaft T2115SCS x 2-7/16 Drive Shaft T2115SCS x 3 Drive Shaft T2115SCS x 1-1/2 Stainless Steel Drive Shaft T2115SCS x 2 Stainless Steel Drive Shaft T2115SCS x 2-7/16 Stainless Steel Drive Shaft T2115SCS x 3 Stainless Steel Drive Shaft (1) See page G2-49 for Pos C Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-51

52 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T2115H, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-52

53 SELECTION/DIMENSIONS Mount Dimensions - T2115H, Position B & D (1) Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Mounting Position B Position D Frame Mount 182T & 184T 213T & 215T 254T & 256T Height Min Max Min Max Min Max M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-53

54 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T2115H, Position & C MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-54

55 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T2115H, Position & C Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Mounting Position Position C Frame Mount 182T & 184T 213T & 215T 254T & 256T Height Min Max Min Max Min Max M M M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim (1) For U Or Flared Trough Ends Per CEM Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-55

56 Gearing Reference SELECTION/DIMENSIONS Taper Bushed Reducer - T3203H, Single nd Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-56

57 SELECTION/DIMENSIONS Taper Bushed Reducer - T3203H, Single nd Double Reduction T3203H Taper Bushed Reducers (1) T3203H ccessories Reducer Size Part Number GM Code ctual Ratio Weight lbs. Description Part Number T3203H S T3203R Rod ssembly (1) T3203H D T3203BS Backstop ssembly T3203H D T3203MM Mount ssembly ( T) (3) T3203H D T3203BG Belt Guard - Pos. B ( T) T3203H D T3203BG Belt Guard - Pos. C ( T) (4) (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. See page G2-121 for Maximum Bore Straight Bore T II Reducers + Rod ssembly mounting locations are limited to positions show in drawing. Weight Lbs T3203BG Belt Guard - Pos. D ( T) T0-T3 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T0-T3 Vertical Breather Kit T3203H V-Ring Kit T3203H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications (5) (6) T3203H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Shaft Keyseat Weight Part Weight Standard Shaft Number Required Short Driven Shaft Required (7) lbs. (9) (10) Number lbs. (9) (10) Bushing Kit Bushing Kit (8) T3203TB x 2-3/ /8 x 5/16 x 8.55 T3203TB x 2-1/ /2 x 1/4 x 8.55 T3203TB x 2-3/ /2 x 1/4 x 8.55 T3203TBS x 2-3/ /2 x 1/4 x 5.46 T3203TB x 2-1/ /2 x 1/4 x 8.55 T3203TBS x 2-1/ /2 x 1/4 x 5.46 T3203TB x /2 x 1/4 x 8.55 T3203TBS x /2 x 1/4 x 5.46 T3203TB x 1-15/ /2 x 1/4 x 8.55 T3203TBS x 1-15/ /2 x 1/4 x 5.46 T3203TB x 1-7/ /2 x 1/4 x 8.55 T3203TBS x 1-7/ /2 x 1/4 x 5.46 T3203TB x 1-3/ /8 x 3/16 x 8.55 T3203TBS x 1-3/ /8 x 3/16 x 5.46 T3203TB x 1-11/ /8 x 3/16 x 8.55 T3203TBS x 1-11/ /8 x 3/16 x 5.46 T3203TB x 1-5/ /8 x 3/16 x 8.55 T3023TBS x 1-5/ /8 x 3/16 x 5.46 T3203TB x 1-1/ /8 x 3/16 x 8.55 T3203TBS x 1-1/ /8 x 3/16 x 5.46 T3203TB x 1-7/ /8 x 3/16 x 8.55 T3203TBS x 1-7/ /8 x 3/16 x 5.46 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Bushing Covers Reducer Size Description Part Number Weight T3203H BS Polymer Closed (12) T3203H BS Polymer split (12) Reducer Size Description Part Number Weight T3203H luminum Closed (13) T3203H luminum Spllit (13) Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-57

58 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T3203H, Single nd Double Reduction MOTORIZED 7.75 BOLT Dia. H F Dia. E 7.75 G G C D B D TORQUE-RM Engineering System-1 Part Number Index G2-58

59 SELECTION/DIMENSIONS Screw Conveyor Drive - T3203H, Single nd Double Reduction T3203H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2 9, / /8 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /8 (1) (4) (5) T3203H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T3203SC dapter & Hardware Kit T3203SCP djustable Packing Kit (3) T3203SCS x 1-1/2 Drive Shaft T3203SCS x 2 Drive Shaft T3203SCS x 2-7/16 Drive Shaft T3203SCS x 3 Drive Shaft T3203SCS x 3-7/16 Drive Shaft T3203SCS x 1-1/2 Stainless Steel Drive Shaft T3203SCS x 2 Stainless Steel Drive Shaft T3203SCS x 2-7/16 Stainless Steel Drive Shaft T3203SCS x 3 Stainless Steel Drive Shaft T3203SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G2-57 for Pos C Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-59

60 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T3203H, Position B & D MOTORIZED MIN CENTERS MX CENTERS M2 M POSITION B 1.81 TORQUE-RM Engineering System-1 Part Number Index MIN CENTERS MX CENTERS POSITION D M2 M C B INPUT SHFT G2-60

61 SELECTION/DIMENSIONS Mount Dimensions - T3203H, Position B & D (1) Frame Lateral djustment Mount 143T & 145T 182T & 184T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Mounting Position B Position D Frame Mount 213T & 215T 254T & 256T 284T & 286T Height Min Max Min Max Min Max M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-61

62 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T3203H, Position & C MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-62

63 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T3203H, Position & C Frame Lateral djustment Mount 143T & 145T 182T & 184T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Mounting Position Position C Frame Mount 213T & 215T 254T & 256T 284T & 286T Height Min Max Min Max Min Max M M M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim (1) For U Or Flared Trough Ends Per CEM Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-63

64 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Taper Bushed Reducers - T4207H, Single nd Double Reduction 1/2 BOLT MIN MX o /16 DI SHFT 3/8x3/8x4-11/16 KEY 5.50 *1.48 MINIMUM DISTNCE FOR BUSHING SCREW REMOVL * 2-11/16" Max END OF BERING ON DRIVEN SHFT TORQUE-RM Engineering System-1 Part Number Index 5.02 Dia REDUCER WITH BCKSTOP o 1/2-13 NC x 1.00 DEEP FLNGE MOUNTING DIMENSIONS G2-64

65 SELECTION/DIMENSIONS Taper Bushed Reducers - T4207H, Single nd Double Reduction T4207H Taper Bushed Reducers (1) T4207H ccessories Reducer Part GM ctual Weight Size Number Code Ratio lbs. Description Part Number T4207H S T4207R Rod ssembly (1) T4207H D T4207BS Backstop ssembly (5, 9, 15, 25:1) T4207H D T4207BS 40:1 Backstop ssembly T4207H D T4207MM Mount ssembly ( T) (3) T4207H D T4207BG Belt Guard - Pos. B ( T) (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. See page G2-121 for Maximum Bore Straight Bore T II Reducers + Rod ssembly mounting locations are limited to positions show in drawing. T4207H Tapered Bushing Kits Bushing Size Part Standard Shaft Number Bushing Kit (5) (6) Weight lbs. Shaft Keyseat Required Weight lbs. T4207BG Belt Guard - Pos. C ( T) (4) T4207BG Belt Guard - Pos. D ( T) T4207CF Cooling ssembly T4-T9 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T4207H V-Ring Kit T4207H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications Bushing Size Short Shaft Bushing Kit (8) Part Number Weight lbs. GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Shaft Keyseat Required (7) (9) (10) (9) (10) T4207TB x 2-11/ /8 x 5/16 x 8.93 T4207TB x 2-1/ /8 x 5/16 x 8.93 T4207TB x 2-7/ /8 x 5/16 x 8.93 T4207TBS x 2-7/ /8 x 5/16 x 5.65 T4207TB x 2-3/ /8 x 5/16 x 8.93 T4207TBS x 2-3/ /8 x 5/16 x 5.65 T4207TB x 2-1/ /2 x 1/4 x 8.93 T4207TBS x 2-1/ /2 x 1/4 x 5.65 T4207TB x 2-3/ /2 x 1/4 x 8.93 T4207TBS x 2-3/ /2 x 1/4 x 5.65 T4207TB x 2-1/ /2 x 1/4 x 8.93 T4207TBS x 2-1/ /2 x 1/4 x 5.65 T4207TB x /2 x 1/4 x 8.93 T4207TBS x /2 x 1/4 x 5.65 T4207TB x 1-15/ /2 x 1/4 x 8.93 T4207TBS x 1-15/ /2 x 1/4 x 5.65 T4207TB x 1-7/ /2 x 1/4 x 8.93 T4207TBS x 1-7/ /2 x 1/4 x 5.65 T4207TB x 1-3/ /8 x 3/16 x 8.93 T4207TBS x 1-3/ /8 x 3/16 x 5.65 T4207TB x 1-11/ /8 x 3/16 x 8.93 T4207TBS x 1-11/ /8 x 3/16 x 5.65 Bushing Covers Reducer Size Description Part Number Weight T4207H BS Polymer Closed (12) T4207H BS Polymer split (12) Reducer Size Description Part Number Weight T4207H luminum Closed (13) T4207H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-65

66 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T4207H, Single nd Double Reduction 9.25 BOLT Dia. H MOTORIZED 9.25 G F Dia. E G C D B D TORQUE-RM Engineering System-1 Part Number Index G2-66

67 SELECTION/DIMENSIONS Screw Conveyor Drive - T4207H, Single nd Double Reduction T4207H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 9, / /8 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /8 (1) (4) (5) T4207H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T4207SC dapter & Hardware Kit T4207SCP djustable Packing Kit (3) T4207SCS x 2 Drive Shaft T4207SCS x 2-7/16 Drive Shaft T4207SCS x 3 Drive Shaft T4207SCS x 3-7/16 Drive Shaft T4207SCS x 2 Stainless Steel Drive Shaft T4207SCS x 2-7/16 Stainless Steel Drive Shaft T4207SCS x 3 Stainless Steel Drive Shaft T4207SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G2-65 for Pos C Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-67

68 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T4207H, Position B & D MOTORIZED MIN CENTERS MX CENTERS M2 M TORQUE-RM Engineering System-1 Part Number Index POSITION B MIN CENTERS MX CENTERS POSITION D M2 M C B INPUT SHFT G2-68

69 SELECTION/DIMENSIONS Mount Dimensions - T4207H, Position B & D (1) Frame Lateral djustment Mount 143T & 145T 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-69

70 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Mount Dimensions - T4207H, Position & C MX CENTERS MIN CENTERS M M3 M POSITION C B TORQUE-RM Engineering System-1 Part Number Index MIN CENTERS MX CENTERS POSITION C M2 M3 M INPUT SHFT G2-70

71 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T4207H, Position & C Frame Lateral djustment Mount 143T & 145T 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim (1) For U Or Flared Trough Ends Per CEM Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-71

72 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index SELECTION/DIMENSIONS Taper Bushed Reducers - T5215H, Single nd Double Reduction 1/2 BOLT MIN MX REDUCER WITH BCKSTOP 90 o /8" DI SHFT 3/8x3/8x5-3/4 KEY * 1.81" MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 5/8-11 NC x 1.25 DEEP FLNGE MOUNTING DIMENSIONS * 3-3/16" MX END OF BERING ON DRIVEN SHFT G2-72

73 SELECTION/DIMENSIONS Taper Bushed Reducers - T5215H, Single nd Double Reduction T5215H Taper Bushed Reducers (1) T5215H ccessories Reducer Part GM ctual Weight Size Number Code Ratio lbs. Description Part Number T5215H S T5215R Rod ssembly (1) T5215H D T5215BS Backstop ssembly (5, 9, 15, 25:1) T5215H D T521BS 40:1 Backstop ssembly T5215H D T5215MM Mount ssembly ( T) (3 ) T5215H D T5215BG Belt Guard - Pos. B ( T) (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. See page G2-121 for Maximum Bore Straight Bore T II Reducers + Rod ssembly mounting locations are limited to positions show in drawing. Weight lbs. T5215BG Belt Guard - Pos. C ( T) (4) T5215BG Belt Guard - Pos. D ( T) T5215CF Cooling Fan ssembly T4-T9 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T5215H V-Ring Kit T5215H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications See page G2-118 for cooling fan dimensions (5) (6) T5215H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Weight Required Part Weight Shaft Keyseat Standard Shaft Number Short Shaft lbs. Number lbs. Required (9) (10 ) Bushing Kit (7) (9) (10) Bushing Kit (8) T5215TB x 3-3/ /4 x 3/8 x T5215TB x /4 x 3/8 x T5215TB x 2-15/ /4 x 3/8 x T5215TBS x 2-15/ /4 x 3/8 x 6.36 T5215TB x 2-7/ /4 x 3/8 x T5215TBS x 2-7/ /4 x 3/8 x 6.36 T5215TB x 2-11/ /8 x 5/16 x T5215TBS x 2-11/ /8 x 5/16 x 6.36 T5215TB x 2-1/ /8 x 5/16 x T5215TBS x 2-1/ /8 x 5/16 x 6.36 T5215TB x 2-7/ /8 x 5/16 x T5215TBS x 2-7/ /8 x 5/16 x 6.36 T5215TB x 2-3/ /8 x 5/16 x T5215TBS x 2-3/ /8 x 5/16 x 6.36 T5215TB x 2-1/ /2 x 1/4 x T5215TBS x 2-1/ /2 x 1/4 x 6.36 T5215TB x 2-3/ /2 x 1/4 x T5215TBS x 2-3/ /2 x 1/4 x 6.36 T5215TB x 2-1/ /2 x 1/4 x T5215TBS x 2-1/ /2 x 1/4 x 6.36 T5215TB x /2 x 1/4 x T5215TBS x /2 x 1/4 x 6.36 T5215TB x 1-15/ /2 x 1/4 x T5215TBS x 1-15/ /2 x 1/4 x 6.36 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Bushing Covers Reducer Size Description Part Number Weight T5215H BS Polymer Closed (12) T5215H BS Polymer Split (12) Reducer Size Description Part Number Weight T5215H luminum Closed (13) T5215H luminum Spllit (13) Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-73

74 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T5215H, Single nd Double Reduction MOTORIZED 9.25 BOLT Dia. H F Dia. E 9.25 G TORQUE-RM Engineering System-1 Part Number Index G C D B D G2-74

75 SELECTION/DIMENSIONS Screw Conveyor Drive - T5215H, Single nd Double Reduction T5215H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 9, / /8 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /8 (1) (4) (5) T5215H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T5215SC dapter & Hardware Kit T5215SCP djustable Packing Kit (3) T5215SCS x 2 Drive Shaft T5215SCS x 2-7/16 Drive Shaft T5215SCS x 3 Drive Shaft T5215SCS x 3-7/16Drive Shaft T5215SCS x 2 Stainless Steel Drive Shaft T5215SCS x 2-7/16 Stainless Steel Drive Shaft T5215SCS x 3 Stainless Steel Drive Shaft T5215SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G2-73 for Pos C Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-75

76 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T5215H, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-76

77 SELECTION/DIMENSIONS Mount Dimensions - T5215H, Position B & D (1) Frame Lateral djustment Mount 182T & 184T 213T & 215T 254T & 256T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M Frame Lateral djustment Mount 284T & 286T 324T & 326T 364T & 365T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-77

78 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Mount Dimensions - T5215H, Position & C MX CENTES MIN CENTERS M2 M3 M TORQUE-RM Engineering System-1 Part Number Index POSITION MIN CENTERS MX CENTERS POSITION C M2 M3 M4 C INPUT SHFT B G2-78

79 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T5215H, Position & C Frame Lateral djustment Mount 182T & 184T 213T & 215T 254T & 256T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Mounting Lateral djustment B Min B Max C Min C Max Position Position C Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim (1) For U Or Flared Trough Ends Per CEM Frame Mount 284T & 286T 324T & 326T 364T & 365T Height Min Max Min Max Min Max M M M M M M Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-79

80 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Taper Bushed Reducers - T6307H, Single nd Double Reduction /8 BOLT MIN MX o 2-3/16" DI SHFT 1/2 x 1/2 x 6 KEY 4 HOLES, 1/2-13x1.12 o ON B.C * END OF BERING ON DRIVEN SHFT 3-7/16" MX TORQUE-RM Engineering System-1 Part Number Index REDUCER WITH BCKSTOP * 1.81 MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 3/4-10 NC x 1.25 DEEP FLNGE MOUNTING DIMENSIONS G2-80

81 SELECTION/DIMENSIONS Taper Bushed Reducers - T6307H, Single nd Double Reduction T6307H Taper Bushed Reducers (1) T6307H ccessories Reducer Size Part Number GM Code ctual Ratio Weight lbs. Description Part Number T6307H S T6307R Rod ssembly (1) T6307H D T6307BS Backstop ssembly (5, 9, 15:1) T6307H D T6307BS 25:1 & 40:1 Backstop ssembly T6307H D T6307MM Mount ssembly ( T) (3) T6307H D T6307BG Belt Guard - Pos. B ( T) (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. See page G2-121 for Maximum Bore Straight Bore T II Reducers + Rod ssembly mounting locations are limited to positions show in drawing. (5) (6) T6307H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Weight Standard Shaft Number Required Short Shaft lbs. (7) (9) (10) Bushing Kit Bushing Kit (8) Weight lbs. T6307BG Belt Guard - Pos. C ( T) (4) T6307BG Belt Guard - Pos. D ( T) T6307CF Cooling Fan ssembly T4-T9 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T6307H V-Ring Kit T6307H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications See page G2-118 for cooling fan dimensions Part Number GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Weight lbs. Shaft Keyseat Required (9) (10) T6307TB x 3-7/ /8 x 7/16 x T6307TBS x 3-7/ /8 x 7/16 x 6.72 T6307TB x 3-3/ /4 x 3/8 x T6307TBS x 3-3/ /4 x 3/8 x 6.72 T6307TB x /4 x 3/8 x T6307TBS x /4 x 3/8 x 6.72 T6307TB x 2-15/ /4 x 3/8 x T6307TBS x 2-15/ /4 x 3/8 x 6.72 T6307TB x 2-7/ /4 x 3/8 x T6307TBS x 2-7/ /4 x 3/8 x 6.72 T6307TB x 2-11/ /8 x 5/16 x T6307TBS x 2-11/ /8 x 5/16 x 6.72 T6307TB x 2-1/ /8 x 5/16 x T6307TBS x 2-1/ /8 x 5/16 x 6.72 T6307TB x 2-7/ /8 x 5/16 x T6307TBS x 2-7/ /8 x 5/16 x 6.72 T6307TB x 2-3/ /8 x 5/16 x T6307TBS x 2-3/ /8 x 5/16 x 6.72 T6307TB x 2-1/ /2 x 1/4 x T6307TBS x 2-1/ /2 x 1/4 x 6.72 T6307TB x 2-3/ /2 x 1/4 x T6307TBS x 2-3/ /2 x 1/4 x 6.72 Bushing Covers Reducer Size Description Part Number Weight T6307H BS Polymer Closed (12) T6307H BS Polymer Split (12) Reducer Size Description Part Number Weight T6307H luminum Closed (13) T6307H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-81

82 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T6307H, Single nd Double Reduction MOTORIZED 9.25 BOLT Dia. H F Dia. E 9.25 G C D D G B TORQUE-RM Engineering System-1 Part Number Index G2-82

83 SELECTION/DIMENSIONS Screw Conveyor Drive - T6307H, Single nd Double Reduction T6307H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 12, / / /8 12, 14, 16,18, / /4 18, 20, / / /8 (1) (4) (5) T6307H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T6307SC dapter & Hardware Kit T6307SCP djustable Packing Kit (3) T6307SCS x 2-7/16 Drive Shaft T6307SCS x 3 Drive Shaft T6307SCS x 3-7/16 Drive Shaft T6307SCS x 2-7/16 Stainless Steel Drive Shaft T6307SCS x 3 Stainless Steel Drive Shaft T6307SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G2-81 for Poc C Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit. (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-83

84 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T6307H, Position B & D MOTORIZED MIN CENTERS MX CENTERS 1.75 M2 M TORQUE-RM Engineering System-1 Part Number Index POSITION B MX CENTERS MIN CENTERS POSITION D M2 M C B INPUT SHFT G2-84

85 SELECTION/DIMENSIONS Mount Dimensions - T6307H, Position B & D (1) Frame Lateral djustment Mount 182T & 184T 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-85

86 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Mount Dimensions - T6307H, Position & C MX CENTERS MIN CENTERS M2 M3 M TORQUE-RM Engineering System-1 Part Number Index POSITION MIN CENTERS MX CENTERS POSITION C M2 M3 M C B INPUT SHFT G2-86

87 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T6307H, Position & C Mounting B Min Lateral djustment B Min C Min C Min Position Position C Mounting B Min Lateral djustment B Max C Min Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size (1) For U Or Flared Trough Ends Per CEM Mount Height Frame 182T & 184T 213T & 215T 254T & 256T 284T & 286T Min Max Min Max Min Max Min Max M M M M M M C Max Position Position C Mount Height Frame 324T & 326T 364T & 365T 404T & 405T Min Max Min Max Min Max M M M M M M Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Trough Height Minimum Mounting Position Dia Dim T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-87

88 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Taper Bushed Reducers - T7315H, Single nd Double Reduction 3/4 BOLT MIN MX o /16" DI. SHFT 5/8 x 5/8x 6 KEY 4 HOLES, 1/2-13x1.12 o ON B.C * END OF BERING ON DRIVEN SHFT 4-7/16" MX TORQUE-RM Engineering System-1 Part Number Index 6.99 Dia REDUCER WITH BCKSTOP * 2.06" MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 3/4-10 NC x 1.25 DEEP FLNGE MOUNTING DIMENSIONS G2-88

89 SELECTION/DIMENSIONS Taper Bushed Reducers - T7315H, Single nd Double Reduction T7315H Taper Bushed Reducers (1) Reducer Size Part Number GM Code ctual Ratio Weight lbs. T7315H ccessories Description See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications See page G2-118 for cooling fan dimensions GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Part Number T7315H S T7315/8407R Rod ssembly (1) T7315H D T7315BS Backstop ssembly (5, 9, 15, 25:1) T7315H D T7315/9415BS 40:1 Backstop ssembly T7315H D T7315/8407MM Mount ssembly ( T) (3) T7315H D T7315/8407BG Belt Guard - Pos. B ( T) T7315/8407BG Belt Guard - Pos. C ( T) (4) T7315/8407BG Belt Guard - Pos. D ( T) T7315/8407CF Cooling Fan ssembly T4-T9 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T7315/8407H V-Ring Kit T7315H Lube Kit LUBEKITT (5) (6) T7315H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Shaft Weight Part Weight Standard Shaft Number Required Short Shaft Keyseat Required (7) lbs. Number lbs. Bushing Kit (10) Bushing Kit (8) (9) (10) T7315TB x 4-7/ x 1/2 x T7315TB x 4-3/ x 1/2 x T7315TB x 3-15/ x 1/2 x T7315TBS x 3-15/ x 1/2 x 7.62 T7315TB x 3-7/ /8 x 7/16 x T7315TBS x 3-7/ /8 x 7/16 x 7.62 T7315TB x 3-3/ /4 x 3/8 x T7315TBS x 3-3/ /4 x 3/8 x 7.62 T7315TB x /4 x 3/8 x T7315TBS x /4 x 3/8 x 7.62 T7315TB x 2-15/ /4 x 3/8 x T7315TBS x 2-15/ /4 x 3/8 x 7.62 T7315TB x 2-7/ /4 x 3/8 x T7315TBS x 2-7/ /4 x 3/8 x 7.62 T7315TB x 2-11/ /8 x 5/16 x T7315TBS x 2-11/ /8 x 5/16 x 7.62 T7315TB x 2-1/ /8 x 5/16 x T7315TBS x 2-1/ /8 x 5/16 x 7.62 T7315TB x 2-7/ /8 x 5/16 x T7315TBS x 2-7/ /8 x 5/16 x 7.62 Bushing Covers Reducer Size Description Part Number Weight T7315H BS Polymer Closed (12) T7315H BS Polymer Split (12) Reducer Size Description Part Number Weight T7315H luminum Closed (13) T7315H luminum Spllit (13) Weight lbs. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-89

90 Gearing Reference SELECTION/DIMENSIONS Screw Conveyor Drive - T7315H, Single nd Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-90

91 SELECTION/DIMENSIONS Screw Conveyor Drive - T7315H, Single nd Double Reduction T7315H Screw Conveyor Drive Dimensions Screw Dia Drive Shaft Dia B C D Dimensions Hole Dia E 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /8 (1) (4) (5) T7315H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T7315SC dapter & Hardware Kit T7315SCP djustable Packing Kit (3) T7315SCS x 2-7/16 Drive Shaft T7315SCS x 3 Drive Shaft T7315SCS x 3-7/16Drive Shaft T7315SCS x 2-7/16 Stainless Steel Drive Shaft T7315SCS x 3 Stainless Steel Drive Shaft T7315SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G2-89 for Pos C Belt Guard for Screw Conveyor Drive applications. SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware. (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals. (4) SCS Drive Shaft is a shaft only. Mounting hardware is stocked with the adapter & hardware kit. (5) complete T II Screw Conveyor Drive, order a T II Reducer, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. F G Bolt Dia H Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-91

92 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T7315H, Position B & D MOTORIZED MIN CENTERS MX CENTERS 1.75 M2 M TORQUE-RM Engineering System-1 Part Number Index MIN CENTERS POSITION D POSITION B MX CENTERS M2 M C B INPUT SHFT G2-92

93 SELECTION/DIMENSIONS Mount Dimensions - T7315H, Position B & D (1) Frame Lateral djustment Mount 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-93

94 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Mount Dimensions - T7315H, Position & C MX CENTERS MIN CENTERS POSITION 3.71 M2 M3 M C B INPUT SHFT TORQUE-RM Engineering System-1 Part Number Index MIN CENTERS MX CENTERS POSITION C M2 M3 M G2-94

95 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T7315H, Position & C Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size (1) For U Or Flared Trough Ends Per CEM Mount Height Frame 213T & 215T 254T & 256T 284T & 286T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Mount Height Frame 324T & 326T 364T & 365T 404T & 405T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim M M M Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 M4 M4 M4 M3 M2 M2 M M4 M4 M3 M3 M2 M M4 M4 M3 M3 M3 M M4 M3 M3 M3 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-95

96 Gearing Reference SELECTION/DIMENSIONS Taper Bushed Reducers - T8407H, Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index 3/4 BOLT MIN MX Dia REDUCER WITH BCKSTOP 90 o /16" DI. SHFT 5/8 X 5/8 x 6-3/4 KEY 4 HOLES, 1/2-13x1.12 o ON B.C. * 2.06" MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 3/4-10 NC x 1.25 DEEP FLNGE MOUNTING DIMENSIONS * END OF BERING ON DRIVEN SHFT 4-7/16" MX G2-96

97 SELECTION/DIMENSIONS Taper Bushed Reducers - T8407H, Double Reduction T8407H Taper Bushed Reducers (1) T8407H ccessories Reducer Part GM ctual Weight Part Weight Description Size Number Code Ratio lbs. Number lbs. T8407H D T7315/8407R Rod ssembly (1) T8407H D T8407BS Backstop ssembly (15, 25:1) T8407H D T8407BS 40:1 Backstop ssembly (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions show in drawing. (4) (5) T8407H Tapered Bushing Kits Bushing Size Standard Shaft Bushing Kit Part Number (6) Weight lbs. Shaft Keyseat Required (8) (9) T7315/8407MM Mount ssembly ( T) (3) T7315/8407BG Belt Guard - Pos. B ( T) T7315/8407BG Belt Guard - Pos. C ( T) T7315/8407BG Belt Guard - Pos. D ( T) T7315/8407CF Cooling Fan ssembly T4-T9 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T7315/8407H V-Ring Kit T8407H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G2-118 for cooling fan dimensions SC dapter & Hardware Kit is available for T8407H reducers as a non-stock product. Consult Dodge about SCS Drive Shafts. Bushing Size Short Shaft Bushing Kit (7) Part Number GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (6) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (7) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (8) Minimum keyseat and shaft length required to mount reducer with bushing kit (9) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Weight lbs. Shaft Keyseat Required (8) (9) T8407TB x 4-7/ x 1/2 x T8407TBS x 4-7/ x 1/2 x 8.10 T8407TB x 4-3/ x 1/2 x T8407TBS x 4-3/ x 1/2 x 8.10 T8407TB x 3-15/ x 1/2 x T8407TBS x 3-15/ x 1/2 x 8.10 T8407TB x 3-7/ /8 x 7/16 x T8407TBS x 3-7/ /8 x 7/16 x 8.10 T8407TB x 3-3/ /4 x 3/8 x T8407TBS x 3-3/ /4 x 3/8 x 8.10 T8407TB x /4 x 3/8 x T8407TBS x /4 x 3/8 x 8.10 T8407TB x 2-15/ /4 x 3/8 x T8407TBS x 2-15/ /4 x 3/8 x 8.10 Bushing Covers Reducer Size Description Part Number Weight T8407H BS Polymer Closed (12) T8407H BS Polymer Split (12) Reducer Size Description Part Number Weight T8407H luminum Closed (13) T8407H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-97

98 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-98

99 SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position B & D (1) Mount Height Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Frame 213T & 215T 254T & 256T 284T & 286T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Mount Height Frame 324T & 326T 364T & 365T 404T & 405T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-99

100 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position & C MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-100

101 SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position & C (1) Frame Lateral djustment Mount 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-101

102 Gearing Reference SELECTION/DIMENSIONS Taper Bushed Reducers - T9415H, Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-102

103 SELECTION/DIMENSIONS Taper Bushed Reducers - T9415H, Double Reduction T9415H Taper Bushed Reducers (1) Reducer Size Part Number GM Code ctual Ratio Weight lbs. T9415H ccessories Description Part Number T9415H D T9415R Rod ssembly (1) T9415H D T9415BS Backstop ssembly (15, 25:1) T9415H D T7315/9415BS 40:1 Backstop ssembly (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions show in drawing. T9415H Tapered Bushing Kits (4) Bushing Size Part Standard Shaft Number (5) Bushing Kit Weight lbs. Shaft Keyseat Required (7) (8) Weight lbs. T9415MM Mount ssembly ( T) (3) T9415BG Belt Guard - Pos. B ( T) T9415BG Belt Guard - Pos. D ( T) T9415CF Cooling Fan ssembly T4-T9 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T9415H V-Ring Kit T9415H Lube Kit LUBEKITT See page G for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G2-118 for cooling fan dimensions. Bushing Size Short Shaft Bushing Kit (6) Part Number GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (6) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (7) Minimum keyseat and shaft length required to mount reducer with bushing kit (8) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Weight lbs. Shaft Keyseat Required (7) (8) T9415TB x 4-15/ /4 x 5/8 x T9415TBS x 4-15/ /4 x 5/8 x 8.56 T9415TB x 4-7/ x 1/2 x T9415TBS x 4-7/ x 1/2 x 8.56 T9415TB x 4-3/ x 1/2 x T9415TBS x 4-3/ x 1/2 x 8.56 T9415TB x 3-15/ x 1/2 x T9415TBS x 3-15/ x 1/2 x 8.56 T9415TB x 3-7/ /8 x 7/16 x T9415TBS x 3-7/ /8 x 7/16 x 8.56 Bushing Covers Reducer Size Description Part Number Weight T9415H BS Polymer Closed (12) T9415H BS Polymer Split (12) Reducer Size Description Part Number Weight T9415H luminum Closed (13) T9415H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-103

104 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T9415H, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-104

105 SELECTION/DIMENSIONS Mount Dimensions - T9415H, Position B & D (1) Mount Height Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Frame 254T & 256T 284T & 286T 324T & 326T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Mount Height Frame 364T & 365T 404T & 405T 444T & 445T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-105

106 Gearing Reference SELECTION/DIMENSIONS Taper Bushed Reducers - T10507H, Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-106

107 SELECTION/DIMENSIONS Taper Bushed Reducers - T10507H, Double Reduction T10507H Taper Bushed Reducers (1) Reducer Size Part Number GM Code ctual Ratio Weight lbs. T10507H ccessories Description Part Number T10507H D T10507R Rod ssembly (1) T10507H D T10507BS Backstop ssembly (15, 25:1) T10507H D T10507BS 40:1 Backstop ssembly (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions show in drawing. T10507H Tapered Bushing Kits (4) Bushing Size Part Standard Shaft Number Bushing Kit Weight lbs. Shaft Keyseat Required Weight lbs. T10507MM Mount ssembly ( T) (3) T10507BG Belt Guard - Pos. B ( T) T10507BG Belt Guard - Pos. D ( T) T10507CF Cooling Fan ssembly T10-T12 Hydra-Lock Dessicent Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T10507H V-Ring Kit T10507H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G2-118 for cooling fan dimensions. Bushing Size Short Shaft Bushing Kit (6) Part Number Weight lbs. GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (6) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (7) Minimum keyseat and shaft length required to mount reducer with bushing kit (8) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Shaft Keyseat Required (5) (7) (8) (7) (8) T10507TB x /2 x 3/4 x T10507TB x 5-15/ /2 x 3/4 x T10507TB x 5-7/ /4 x 5/8 x T10507TBS x 5-7/ /4 x 5/8 x 9.67 T10507TB x 4-15/ /4 x 5/8 x T10507TBS x 4-15/ /4 x 5/8 x 9.67 T10507TB x 4-7/ x 1/2 x T10507TBS x 4-7/ x 1/2 x 9.67 T10507TB x 4-3/ x 1/2 x T10507TBS x 4-3/ x 1/2 x 9.67 T10507TB x 3-15/ x 1/2 x T10507TBS x 3-15/ x 1/2 x 9.67 Bushing Covers Reducer Size Description Part Number Weight T10507H BS Polymer Closed (12) T10507H BS Polymer Split (12) Reducer Size Description Part Number Weight T10507H luminum Closed (13) T10507H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-107

108 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T10507H, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-108

109 SELECTION/DIMENSIONS Mount Dimensions - T10507H, Position B & D (1) Mount Height Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Frame 254T & 256T 284T & 286T 324T & 326T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Mount Height Frame 364T & 365T 404T & 405T 444T & 445T Mounting Lateral djustment B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-109

110 Gearing Reference SELECTION/DIMENSIONS Taper Bushed Reducers - T12608H, Double Reduction MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-110

111 SELECTION/DIMENSIONS Taper Bushed Reducers - T12608H, Double Reduction T12608H Taper Bushed Reducers (1) Reducer Size Part Number GM Code ctual Ratio Weight lbs. T12608H ccessories Description Part Number T12608H D T12608R Rod ssembly (1) T12608H D T12608BS Backstop ssembly (15, 25:1) T12608H D T12608BS 40:1 Backstop ssembly (1) Reducers are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions show in drawing. T12608H Tapered Bushing Kits (4) Bushing Size Part Standard Shaft Number (5) Bushing Kit Weight lbs. Shaft Keyseat Required (7) (8) Weight lbs. T12608MM Mount ssembly ( T) (3) T12608BG Belt Guard - Pos. B ( T) T12608BG Belt Guard - Pos. D ( T) T12608CF Cooling Fan ssembly T10-T12 Hydra-Lock Dessicant Breather Kit HL XT Enclosed Breather System, T T4-T12 Vertical Breather Kit T12608H V-Ring Kit T12608H Lube Kit LUBEKITT See page G2-127 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G2-118 for cooling fan dimensions. Bushing Size Short Shaft Bushing Kit (6) Part Number GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (6) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (7) Minimum keyseat and shaft length required to mount reducer with bushing kit (8) lways check the driven shaft and key for strength Closed bushing covers may not be compatible with belt guards or large sheave installations Split bushing covers are designed for use on driven machine side of reducer with shaft through (12) BS Polymer covers are designed with bolts for tapped reducers, non tapped reducers will require self tapping screws and customer modification of reducer (13) luminum covers are designed with bolts for non tapped reducers and will require the use of self tapping screws and customer modification of reducer Weight lbs. Shaft Keyseat Required (7) (8) T12608TB x /4 x 3/4 x T12608TB x 6-1/ /2 x 3/4 x T12608TBS x 6-1/ /2 x 3/4 x T12608TB x 6-7/ /2 x 3/4 x T12608TBS x 6-7/ /2 x 3/4 x T12608TB x /2 x 3/4 x T12608TBS x /2 x 3/4 x T12608TB x 5-15/ /2 x 3/4 x T12608TBS x 5-15/ /2 x 3/4 x T12608TB x 5-7/ /4 x 5/8 x T12608TBS x 5-7/ /4 x 5/8 x T12608TB x 4-15/ /4 x 5/8 x T12608TBS x 4-15/ /4 x 5/8 x Bushing Covers Reducer Size Description Part Number Weight T12608H BS Polymer Closed (12) T12608H BS Polymer Split (12) Reducer Size Description Part Number Weight T12608H luminum Closed (13) T12608H luminum Spllit (13) Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-111

112 Gearing Reference SELECTION/DIMENSIONS Mount Dimensions - T12608H, Position B & D MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-112

113 SELECTION/DIMENSIONS Mount Dimensions - T12608H, Position B & D (1) Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D Frame Lateral djustment Mount 364T & 365T 404T & 405T 444T & 445T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-113

114 Gearing Reference SELECTION/DIMENSIONS Belt Guard Dimensions, T0107L - T5215H MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-114

115 SELECTION/DIMENSIONS Belt Guard Dimensions, T0107L - T5215H Case Mounting Max Sheave Dia. Size Position Min Max Reducer B C T0107L B C T1107H B C T2115H B C T3203H B C T4207H B C T5215H B C Case Mounting E D Size Position Min Max F H J T0107L B C T1107H B C T2115H B C T3203H B C T4207H B C T5215H B C Notes: (1) Minimum centers allow 0.5 for belt assembly Maximum sheave diameters allow 0.5 clearance for belt assembly (3) Range of center distances on belt guard may be less than the full range of center distances available on the motor mount (4) Belt guard cover is lift-off cover construction (5) Belt guard attaches to motor mount brackets (6) E maximum dimension allows clearance for cooling fan (7) Stock Position-B Belt Guards cannot be used with T II Reducers mounted in D position. Use a Position-D Belt Guard (8) Stock Position-C Belt Guards cannot be used with T II Reducers mounted in position. special belt guard is required. Consult Dodge for price and delivery. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-115

116 Gearing Reference SELECTION/DIMENSIONS Belt Guard Dimensions, T6307H - T12608H MOTORIZED TORQUE-RM Engineering System-1 Part Number Index G2-116

117 SELECTION/DIMENSIONS Belt Guard Dimensions, T6307H - T12608H Case Mounting Max Sheave Dias. B Size Position Min Max Reducer C T6307H B C T7315H B C T8407H B C T9415H B T10507H B T12608H B Case Mounting E D Size Position Min Max F H J T6307H B C T7315H B C T8407H B C T9415H B T10507H B T12608H B Notes: (1) Minimum centers allow 0.5 for belt assembly Maximum sheave diameters allow 0.5 clearance for belt assembly (3) Range of center distances on belt guard may be less than the full range of center distances available on the motor mount (4) Belt guard cover is lift-off cover construction (5) Belt guard attaches to motor mount brackets (6) E maximum dimension allows clearance for cooling fan (7) Stock Position-B Belt Guards cannot be used with T II Reducers mounted in D position. Use a Position-D Belt Guard (8) Stock Position-C Belt Guards cannot be used with T II Reducers mounted in position. special belt guard is required. Consult Dodge for price and delivery. Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-117

118 Gearing Reference MOTORIZED SELECTION/DIMENSIONS Cooling Fan Dimensions, T4207H - T12608H When the thermal capacity of a Torque-rm II reducer is exceeded, cooling fans provide an optional, inexpensive way of lowering the oil temperature, thus increasing the thermal horsepower capacity of the reducer. Selection tables indicate when a cooling fan is required. The computer designed fan assembly, which fastens to the input shaft, is compact enough to allow installation of the V-drive originally designed for the reducer. The fan assem blies are designed to allow free circulation of air at the back of the housing as well as through the front of the unit. The fan blade offers a radial streamline airflow, which means smaller fans yet a more efficient movement of air. See Figure 1 and Table 1 for cooling fan installation dimensions. For thermal capacities beyond the range of cooling fans, pump and cooler auxiliary cooling packages may be used. Note: See page G2-128 for maximum input shaft speeds. TORQUE-RM Engineering System-1 Part Number Index Figure 1 - Cooling Fan ssembly Reducer Pump and uxiliary Cooling Package For thermal capacities beyond the range of cooling fans, an optional pump and cooler auxiliary cooling package is available to prevent overheating the reducer and allow the use of full mechanical HP rating by lowering the oil temper ature to an acceptable level. Table 1 - Cooling Fan Installation Dimensions Reducer Dia. B C D T4207H T5215H T6307H T7315H T8407H T9415H T10507H T12608H See individual reducer pages for cooling fan part numbers Specifications for the heat exchanger are as follows: 1/2 HP, 60 Hz, 3 PH. 230/460 Volt, TEFC, 56 Frame. Max imum coolant (water) flow is 3 G.P.M. based upon a maxi mum water temperature of 80 degrees F. Minimum oil temperature for operation is 60 degrees F. Figure 2 - Pump and uxiliary Cooling Package, Part Number G2-118

119 RELTED PRODUCTS Harsh Duty ccessories BS Polymer Bushing Covers Reducer Size Bushing Cover Part Numbers Dimensions Closed Weight Split Weight B C D E F T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H T8407H T9415H T10507H T12608H luminum Bushing Covers Reducer Size Bushing Cover Part Numbers Dimensions Closed Weight Split Weight B C D E F T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H T8407H T9415H T10507H T12608H BS Covers Optional V-Ring Flinger Seal Kit For Harsh Duty Environments (1) Reducer Size Part Number Weight T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H T8407H T9415H T10507H T12608H (1) Consists of 1 input and 2 output V-ring seals which fit in seal OD of housing; provides additional sealing protection for keeping contaminants out of reducer. Metal End Covers V-Ring Kit Drawing - End Cover Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-119

120 Gearing Reference RELTED PRODUCTS Harsh Duty ccessories MOTORIZED Hydra-Lock Breathers Enclosed Breather Oil Sump Heater TORQUE-RM Engineering System-1 Part Number Index Hydra-Lock Breather System Reducer Size SIze Part Number T0107-T3203 HL T4207-T9415 HL T10507-T12608 HL Enclosed Breather Chamber Reducer Size Part Number T0-T T4-T TDNC Coated Tapered Bushings (Thin Dense Nickel Chrome) (3) Oil Sump Immersion Heaters Reducer Size 110 volt, single phase, C cartridge heater, threads into special tapped housing hole. Provides for approximately 70 degrees (F) temperature rise in one hour for cold climates. Simple time phased on-off constructions without thermostate. (3) ll T II reducers have to be factory modified to allow installation of sump heater. Reducer mounting position will determine modification requirement. Consult Dodge. TDNC coated for maximum corrosion resistance with minimum premium cost adder TDNC bushings, backing plates and snap rings Corrosion resistant bolts and lock washers Part Number T0-T3 Not vailable T (with reducer factory modification) T5-T T7-T T10-T (with reducer factory modification) Oil Sight Glasses Reducer Size Size Part Number T0-T3 3/8" T4-T12 3/4" Oil Sight Tubes Reducer Size Size Part Number T0-T3 3/8" T4-T12 3/4" G2-120

121 RELTED PRODUCTS (1) (3) Maximum Bore Straight Bore T II Reducers Reducer Size Max. Bore T II Reducer 5:1 9:1 15:1 25:1 31:1-40:1 Part No. Weight Part No. Weight Part No. Weight Part No. Weight Part No. Weight T1107H 1-11/ T3203H 2-7/ T4207H 2-15/ T5215H 3-7/ T6307H 3-15/ (1) See individual reducer catalog pages for accessories for above reducers Non-stock, made-to-order reducers (3) See Drawing B and Table 4 for catalog dimensions for Maximum Bore Straight Bore T II Reducers Drawing B - Maximum Bore Straight Bore Reducers Table 4 (4) Reducer Size (4) lways check the driven shaft and key for strength (5) Minimum keyset and shaft length required to mount reducer C Shaft Keyseat Required (5) B Bore T1107H /16 3/8 x 3/16 x 5.81 T3203H /16 5/8 x 5/16 x 7.58 T4207H /16 3/4 x 3/8 x 8.01 T5215H /16 7/8 x 7/16 x 8.96 T6307H /16 1 x 1/2 x 9.39 Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-121

122 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index RELTED PRODUCTS Nominal Sheave Ratios Required For Dodge Torque-rm II Reducers - 5:1, 9:1, 15:1 31:1, 32:1 and 33:1 Reducer 25:1 Nominal Reducer Ratio Reducer Reducer 40:1 Nominal Reducer Ratio Nominal Reducer Ratios Output Output Output Speed Speed Speed RPM RPM RPM Note: Speed increase ratios are shown in bold type G2-122

123 RELTED PRODUCTS Nominal Sheave Ratios Required For Dodge Torque-rm II Reducers - 25:1, 31-33:1, 40:1 31:1, 32:1 and 33:1 Reducer 25:1 Nominal Reducer Ratio Reducer Reducer 40:1 Nominal Reducer Ratio Nominal Reducer Ratios Output Output Output Speed Speed Speed RPM RPM RPM Note: Speed increase ratios are shown in bold type Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-123

124 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index RELTED PRODUCTS Nominal Sheave Speed (RPM) t Input For Dodge Reducers Reducer Output RPM 5:1 Nominal Reducer Ratio Reducer Output RPM 9:1 Nominal Reducer Ratio Reducer Output RPM 15:1 Nominal Reducer Ratio Reducer Output RPM 25:1 Nominal Reducer Ratio Reducer Output RPM 31:1, 32:1 and 33:1 Nominal Reducer Ratio Reducer Output RPM :1 Nominal Reducer Ratio G2-124

125 RELTED PRODUCTS Renewal Parts For T II Reducers Torque-rm II Bearing Kits (1) Torque-rm II Seal Kits Size Ratio Kit P/N Size Ratio Kit P/N Size Ratio Kit P/N T0107L 5: T6307H 5: T0107L ll T0107L 9:1-40: T6307H 9:1-15: T1107H ll T1107H 5: T6307H 25:1-40: T2115H 5:1-25: T1107H 9:1-15: T7315H 5: T2115H 40: T1107H 25:1-40: T7315H 9:1-25: T3203H 5:1-25: T2115H 5: T7315H 40: T3203H 40: T2115H 9:1-25: T8407H 15:1-25: T4207H ll T2115H 40: T8407H 40: T5215H ll T3203H 5: T9415H 15:1-25: T6307H ll T3203H 9:1-25: T9415H 40: T7315H ll T3203H 40: T10507H 15:1-25: T8407H ll T4207H 5: T10507H 40: T9415H ll T4207H 9:1-25: T12608H 15:1-25: T10507 ll T4207H 40: T12608H 40: T12608 ll T5215H 5: T5215H 9:1-15: T5215H 25: T5215H 40: (1) Kit contains complete set of bearings for reducer size and ratio indicated. Torque-rm II Level 1 Rebuild Kits (3) Torque-rm II Super Shim Kits (4) Size Ratio Kit P/N Size Ratio Kit P/N T0107L 5: T6307H 5: Size Kit P/N T0107L 9:1-40: T6307H 9:1-15: T0107L T1107H 5: T6307H 25:1-40: T1107H T1107H 9:1-15: T7315H 5: T2115H T1107H 25:1-40: T7315H 9:1-25: T3203H T2115H 5: T7315H 40: T4207H T2115H 9:1-25: T8407H 15:1-25: T5215H T2115H 40: T8407H 40: T6307H T3203H 5: T9415H 15:1-25: T7315H T3203H 9:1-25: T9415H 40: T8407H T3203H 40: T10507H 15:1-25: T9415H T4207H 5: T10507H 40: T10507H T4207H 9:1-25: T12608H 15:1-25: T12608H T4207H 40: T12608H 40: (4) Kit contains complete set of shims for reducer size. T II T5215H 5: shims are not color coded. T5215H 9:1-15: T5215H 25: T5215H 40: (3) Level 1 Rebuild Kit includes input & output seals, all bearings, shims and sealant for reducer size and ratio indicated. See Instruction Manual # MN1601 for gearing part numbers. Kit includes input & output seals, backstop cover gasket and RTV sealant for reducer size and ratio indicated Gearing Reference Part Number Index System-1 Engineering TORQUE-RM MOTORIZED G2-125

126 Gearing Reference MOTORIZED TORQUE-RM Engineering System-1 Part Number Index RELTED PRODUCTS Renewal Parts For T II Reducers Torque-rm II Lube Kits (5) Size T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H T8407H T9415H T10507H T12608H Torque-rm II Level 2 Rebuild Kits (6) Kit P/N LUBEKITT0107 LUBEKITT1107 LUBEKITT2115 LUBEKITT3203 LUBEKITT4207 LUBEKITT5215 LUBEKITT6307 LUBEKITT7315 LUBEKITT8407 LUBEKITT9415 LUBEKITT10507 LUBEKITT12608 (5) Kit contains factory recommended mineral oil ISO220 in volumes sufficient for all recommended mounting positions. Lubricant: It is important that a rebuilt reducer be refilled with fresh lubricant of the proper viscosity group. To make this an easy selection we have prepackaged the required volume of factory standard lubricant which may be ordered along with the rebuild kit. See ccessory table for kit part numbers. Size Ratio Kit P/N Size Ratio Kit P/N 5: : : : T0107L 15: T6307H 15: : : : : : : : : T1107H 15: T7315H 15: : : : : : : : T8407H 25: T2115H 15: : : : : T9415H 25: : : : : T3203H 15: T10507H 25: : : : : : T12608H 25: : : T4207H 15: (6) Level 2 Rebuild Kit includes all items in Level 1 Kit plus high speed input pinion and 25: mating 1st stage gear. Provides maximum protection against downtime. Part number 40: is Level 1 Kit part number + ratio. 5: : T5215H 15: : : G2-126