Model 104 Slider Belt Conveyor

Size: px
Start display at page:

Download "Model 104 Slider Belt Conveyor"

Transcription

1 Model 104 Slider Belt Conveyor Model Description: The Model 104 Slider Bed Belt is designed with the systems approach in mind. The square head and tail end terminals allow you the flexibility to combine this unit with other Titan units to assure a continuous flow of material. The standard 4" deep formed 12-gauge frame allows integration with several other types of conveyors available from Titan. Screw type take-ups and 4" diameter crown face pulleys are some of the standard design features. Modular design allows you the flexibility to add additional sections if required. Your material handling requirements can be solved by the experts at Titan. 1

2 MODEL 680 MULTI-STRAND CHAIN CONVEYOR The Model 680 Multi strand chain conveyor is used to convey products that are not conveyable on a standard roller conveyor. The standard chain is C2060 double pitch with a load capacity of 2,400 lbs. An optional C2080 double pitch chain can be used for loads up to 4,000 lbs. Optional low profile side mounted drive and additional strands of chain can be added to increase load capacities. MODEL 680 MULTI-STRAND CHAIN CONVEYOR Standard Options (2) strands of C2060 C2080, multiple strands available 2,400 lbs 4,000 with (2) strands C2080 Drive 1 HP 230/460/3/60 Horsepower to fit application Frame Formed 7 ga. Structural 30 F.P.M. Specify Chain Capacity Chain Speed Optional Drive location, HP, speed, variable speed available, controls, multiple chain strands, paint NOTE: Specifications subject to change without notice

3 MODEL 680 MULTI-STRAND CHAIN CONVEYOR BELT WIDTH + 9 3/8" 6" BELT WIDTH C - C " " " SECTION A-A SECTION B-B OVERALL LENGTH INFEED SECTION DRIVE SECTION 14" 18" A B " " STD. IC60 REDUCER " 20" MINIMUM W/BOTTOM MOUNT DRIVE A B

4 MODEL 535 CHAIN DRIVEN LIVE ROLLER CONVEYOR The ultimate in heavy-duty conveying for pallets, skids or drums - the Model 535 is designed to handle extremely heavy loads. The 3 1/2 diameter x.300 wall (schedule 80 pipe) rollers are rated for 2500 lbs. per roller. The rollers use a heavy-duty industrial, grease sealed, 1 1/16 hex bore bearing. The Model 535 is available with either #60 or #80 roll-to-roll chain drives depending on chain pull required. Standard construction is a 6 at #8.2 structural channel frame. This unit is available with either a bottom mount or side mount drive. Supports are structural channel (non-adjustable) with foot pads. Roller centers are 6 for #60 chain drive and 6 1/2 for #80 chain drive. MODEL 535 CHAIN DRIVEN LIVE ROLLER CONVEYOR STANDARD OPTIONS Effective Widths 15 to 66 Customer can specify Lengths Per application - 5 Minimum 3 minimum, maximum length based on application Roller Size 3 1/2 dia. x.300 wall 1-1/16 hex shaft (#2500 roll rating) Roller Centers 6 Roller centers of 6, 9, 10-1/8, 12 with #60 sprockets, #80 roll-to-roll chain drive with roller centers of 6-7/16, 9-7/16, 12-7/16 Frame Structural channel Drive 3/4 H.P. 230/460/3/60 1, 1-1/2, 2, 3, 5 HP, 115/230/1/60, 575/3/60, severe duty, inverter duty, brake motor Chain Drive #60 #80 OPTIONAL Roller Space - Consult factory, Roller Center - Consult Factory, Drive locations: as needed, Galvanized or stainless construction, H. P., Speeds, Variable speed, Controls, Paint, 2 or 3 strand chain transfers, Pallet lifts, C Face brake and Fixed end stop, Rollers set low, UHMW sleeves, Galvanized rollers, accumulation sleeves, Knee braces, Air operated blade stop, Supports - #8.2 structural channel, Pop-up roller, blade stops, pallet lifts. NOTE: Specifications subject to change without notice

5 IC-70 IC-70 MODEL 535 CHAIN DRIVEN LIVE ROLLER CONVEYOR 6" STANDARD CENTERS 10' OPTIONAL ROLLER CENTERS 5 5/8" CENTERS 6 3/8" CENTERS 6 3/4" CENTERS 7 1/8" CENTERS 30" STANDARD STANDARD 10' LG. CONVEYOR SECTION W/#60 CHAIN DRIVE 1 29/32" EFFECTIVE WIDTH 6 15/16" 2 1/8" 2 1/8" 5 1/4" 3/8" 8 1/2" 8 1/2" ROLLERS SET HIGH C6 x #8.2 CHANNEL 60A20 SPROCKETS ROLLERS SET LOW 19 1/2" 23" STANDARD BOTTOM MOUNT DRIVE 14" 13" STANDARD SIDE MOUNT DRIVE 6 1/2" STANDARD CENTERS 9'- 9" OPTIONAL ROLLER CENTERS 7" CENTERS 7 1/2" CENTERS 8" CENTERS 8 1/2" CENTERS 30" STANDARD STANDARD 9'-9" LG. CONVEYOR SECTION W/#80 CHAIN DRIVE 1 29/32" EFFECTIVE WIDTH 7 1/4" C8 x #11.5 CHANNEL 1 5/8" 1 7/8" 3/8" 8 1/4" ROLLERS SET HIGH C6 x #8.2 CHANNEL 80A16 SPROCKETS ROLLERS SET LOW STANDARD BOTTOM MOUNT DRIVE 22 3/4" 20 7/8" 14" 12 15/16" STANDARD SIDE MOUNT DRIVE

6 [Type here] Turn Table On Shuttle Model Description: When your plant layout requires a directional change in the smallest possible space of your conveyor system, you should consider using a Titan Powered Turntable. The turntable conveyor can be used for product sortation, accumulation as well as directional changes. The Titan Turntable is available in sizes ranging from 2' diameter to 12' diameter. The standard table top is 7-gauge construction with angle iron supports. The top is driven by either chain and sprockets or air operated cylinder. The unit is furnished with expanded metal guards on all four sides. The unit can be supplied with chain and sprocket drive, air operated for 90 degrees rotation or no drive for manual indexing. Tops can be fitted with gravity roller or chain driven live roller conveyor to suit your application. 3

7 [Type here] Model 425 Model 425 Gravity Roller Conveyor Specifications: Axle: 11/16" Hex Capacity: 580 lbs Frame: Formed 7 gauge Roller Rating: 625 lbs. Rollers: 2-1/2" Diameter x 11 Gauge Shaft: 11/16" hex Minimum Centers: 3" 4

8 [Type here] 525 V-Belt Model MDR Poly V-Belt Motor Driven Roller Conveyor Specifications: Bearings: Grease Sealed Chain: #50 Roll-to-Roll Drive Drive: 24 Volt DC Frame: Formed 7 Gauge Paint: One Coat Industrial Enamel Rollers: 2-1/2" dia. x 11ga. or 2-5/8" dia. x 7 ga. or 1.9" dia. x 16 ga./spring Loaded 7/16" Hex Shaft Speed: Specify Supports: "H" Type 5

9 [Type here] 525 CDLR W/ Iron Cross 525 CDLR Model Description: The Model 525 is designed to handle heavy loads including skids, drums, and pallets. This unit incorporates a number 50 chain with a roll-to-roll drive. The frame is a heavy formed 7 gauge construction with a one piece chain guard. Rollers are 2-1/2" diameter x 11 gauge (580 lb. capacity) centers are 2-13/16", 3-7/16", 4-3/8", 5", 5-15/16" and 10". Standard floor supports supplied are adjustable for approximately 30" to the top of roller. This model is available in lengths to meet your needs (min length: 4-1/2"). Consult the factory for further details. 6

10 MODEL 525 CHAIN DRIVEN LIVE ROLLER The Model 525 Chain Driven Live Roller conveyor from RSI, Inc. is designed to handle heavy loads such as pallets, skids or drums. The unit incorporates a number 50 chain with a roll-to-roll drive. The frame is a heavy formed 7 gauge construction with a one piece chain guard. Rollers are 2-1/2 diameter x 11 gauge (580 lb. capacity). The standard drive is a 3/4 H.P. for 30 F.P.M. roller speed. A wide range of standard effective widths are available. Standard roller spacings are 2-13/16, 3-7/16, 4-3/8, 5, and 5-15/16. Floor supports are optional. The Model 525 comes in lengths to suit with a minimum length of 4 long. Consult the factory for further details. MODEL 525 CHAIN DRIVEN LIVE ROLLER CONVEYOR SPECIFICATIONS Effective Widths Lengths Roller Size Roller Center Standard Options 13 to 40 Specify up to 40 E.W. 5 min. 3 min., max. based on application 2 1/2 Dia. x 11 ga. with 11/16 hex shaft 580 lb. roller cap /16, 3-7/16, 4-3/8, 5-15/16, 10 Frame Formed 7 ga. Drive 3/4 H.P. 230/460/3/60 1, 1-1/2, 2, 3 H.P. 230/460/3/60, severe duty, inverter duty, brake motor #50 #60 available Chain Drive OPTIONAL Roller Space - Consult factory, Roller Center - Consult Factory, Drive locations: as needed, Galvanized or stainless construction, H. P., Speeds, Variable speed, Controls, Coated rollers, Paint, 2 or 3 strand chain transfers, Pallet lifts, Pallet jack plates for side or end load, C Face brake and Fixed end stop, Rollers set low, UHMW sleeves, Accumulation sleeves, Knee braces, Air operated blade stop, Supports - #8.2 structural channel, NOTE: Specifications subject to change without notice

11 MODEL 525 CHAIN DRIVEN LIVE ROLLER CONVEYOR FIGURE "A" OVERALL LENGTH 13" OPTIONAL SUPPORTS 18 3/8" (IC-60) 19 1/2" (IC-70) 20 7/8" (IC-80) REDUCERS FIGURE "B" FIGURE "C" 5 5/16" 5 5/16" EFFECTIVE WIDTH 1 1/2" 3 1/2" EFFECTIVE WIDTH 1 1/2" 1 11/16" 5 13/16" 5 13/16" 1 11/16" 3/8" ROLLERS SET LOW ROLLERS SET HIGH FIGURE "D" STANDARD BOTTOM MOUNT DRIVE 1" 18 13/16" 15 13/16" FIGURE "E" 11 1/2" 8" STANDARD SIDE MOUNT DRIVE 8 5/16" 6 1/2" FIGURE "F" 3 1/2" FIGURE "G" EFFECTIVE WIDTH 5 5/16" 5 13/16" 1 11/16" 1 11/16" 5 13/16" DOUBLE WIDE CHAIN GUARD (STANDARD CENTERS - 3 7/16") DOUBLE DRIVE GUARD (STANDARD CENTERS /16")

12 [Type here] 45 Degree Plastic Belt The Series 2100 Flat Top Zero Tangent Radius belt is designed specifically for curved conveyance, free of straight sections, maximizing all available space. The S2100 has a smooth, closed-top surface that can handle a variety of package sizes, types, and configurations, and is able to maintain product orientation and spacing through its curves. Its compact design provides flexibility, simplifying layout design and conveyor installation. Patent-pending, symmetric drive design simplifies installation Lug-tooth style sprockets and positive drive system provide improved reliability and durability Modular belt construction reduces maintenance time and cost Contact Intralox today for a sample of this new product or for more information. 7

13 POWER TURNTABLE When your plant layout requires a directional change in the smallest possible space, you should consider using a RSI Powered Turntable. The turntable can be used for product sortation, accumulation as well as directional changes. The RSI Turntable is available in sizes ranging from 2 diameter to 10 diameter. The standard table top is 7 gauge construction with angle iron supports. The top is driven by either chain and sprockets or a contact wheel. The unit is furnished with expanded metal guards on all four sides. Roller supports supplied as optional equipment. The unit can be supplied with chain and sprocket drive, air operated for 90 0 rotation or no drive for manual indexing. Tops can be fitted with gravity roller or chain driven live roller conveyor to suit your application POWERED TURNTABLE SPECIFICATIONS DRIVE:...1/2 H.P. 230/460/3/60 SPEED: R.P.M. at Outside Rim FRAME:... 7 Gauge Top with Angle Iron Base BEARINGS:... Grease Sealed SUPPORTS:... Fixed for 30 Elevation PAINT:... One Coat Industrial Enamel NOTE: Specifications subject to change without notice

14 POP-UP TRANSFER, POP-UP STOPS, PALLET CENTERING, PALLET LIFT and PALLET CROWDER OPTIONS Designed to handle heavy duty loads such as pallets, skids and drums. Heavy duty construction with #50 toll-to-roll drive chain. (#60 chain optional.) Standard rollers are 2 1/2 diameter x #11 gauge or 2 5/8 diameter x #7 gauge. Standard roller centers are 5. Supports are 4 structural with adjustable feet. MODEL 525 CHAIN DRIVEN LIVE ROLLER CONVEYOR SPECIFICATIONS Effective Widths Lengths Roller Size Roller Center Standard Options 13 to 40 Specify up to 72 E.W. 5 min. 3 min., max. based on application 2 Dia. x 11 ga. with 7/16 hex shaft lb. roller cap /16, 3-7/16, 4-3/8, 5-15/16, 10 Frame Formed 7 ga. 6 C structural Drive 3/4 H.P. 230/460/3/60 1, 1-1/2, 2, 3 H.P. 230/460/3/60, severe duty, inverter duty, brake motor #50 roll to roll drive #60 available Chain Drive OPTIONAL Roller Space - Consult factory, Roller Center - Consult Factory, Drive locations: as needed, Galvanized or stainless construction, H. P., Speeds, Variable speed, Controls, Coated rollers, Paint, multi-strand chain transfers, Pallet lifts, Pallet jack plates for side or end load, C Face brake and Fixed end stop, Rollers set low, UHMW sleeves, Accumulation sleeves, Knee braces, Air operated blade stop, Supports - #8.2 structural channel, NOTE: Specifications subject to change without notice

15 POP-UP TRANSFER, POP-UP STOPS, PALLET CENTERING, PALLET LIFT and PALLET CROWDER OPTIONS Chain Driven Live Roller Conveyor with Pop-Up Pallet Lift Chain Driven Live Roller Conveyor with Pallet Centering device - Pallet Crowder also available 3 1/2" Overall Length 3 1/2" Overall Length 21 15/16" 18" 30" Standard 21 15/16" 18" 30" Standard Effective Width Effective Width 3 3/4" 14" 3 3/4" Effective 1 1/2" 3 1/2" Width 1 11/16" 1 13/16" 3/8" 1 1/2" Effective Width 3 1/2" 1 11/16" 1 13/16" Rollers Set High End View NOTE: Pop-up Travel Chain Approximately 3 4" above roller 14" 3/8" Rollers Set High End View NOTE: Pop-up Travel Chain Approximately 3 4" above roller 34 1/2" 13 3/4" 18 13/16" 1" 17 1/8" 4 1/8" 18 13/16" 1" 17 1/8" Standard Bottom Mount Drive 4 1/8" 34 1/2" Standard Side Mount Drive 8" 13 3/4"

16 POWERED TURNTABLE Rotation Optional Roller Approaches 6" Dia. Optional Siderails Specify Height Required Expanded Metal Guarding Four Sides 20" Min.

Belt Driven. Conveyors (989) Roller Conveyors Belt Driven Live. Roller Conveyors

Belt Driven. Conveyors (989) Roller Conveyors Belt Driven Live. Roller Conveyors Belt Driven Live Conveyors Conveyors - 195 - Light Duty Transportation Type... 196 Minimum Pressure Accumulation Type... 198 Medium Duty Transportation Type... 200 Heavy Duty Transportation Type... 202

More information

Section Content. Straight Curve Optional Equipment and Devices

Section Content. Straight Curve Optional Equipment and Devices Chain Driven Live Roller Conveyor Section Content Straight Curve Optional Equipment and Devices 31 CDLR Chain DRIVEN LIVE ROLLER CONVEYOR Why CDLR? Roller size and centers optimized to handle nearly any

More information

WE SPECIALIZE. The TITAN Experience - Expect More! Click on any area below to go to the catalog page. Slider Bed Belt Conveyors

WE SPECIALIZE. The TITAN Experience - Expect More! Click on any area below to go to the catalog page. Slider Bed Belt Conveyors The TITN Experience - Expect More! WE SPECILIZE 735 Industrial Loop Road, New London, Wi 54961-2600 Phone: (920) 982-6600 Fax: (920) 982-7750 Outside Wisconsin: 1-800-558-3616 Website: www.titanconveyors.com

More information

Chain. Conveyors Transfers (989) Chain Transfers

Chain. Conveyors Transfers (989) Chain Transfers Chain Conveyors Transfers TRANSFERS Heavy Duty... 231 Pivot Chain Transfer... 231 Reversible Six-Strand Chain Transfer... 231 Standard Models Chain Transfer... 232 CONVEYORS - 229 - Standard Models...

More information

Optional equipment. minimum elevation. braces, casters, polytier supports & ceiling hangers available. See Conveyor Accessories.

Optional equipment. minimum elevation. braces, casters, polytier supports & ceiling hangers available. See Conveyor Accessories. MODEL 738ls Light duty line SHAFT DRIVEN LIVE ROLLER 52 Model 738LS has gained widespread usage with its unique design. Curves, spurs and a number of accessories may be driven by a SINGLE drive. TREAD

More information

Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS

Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru

More information

American Made and American Engineered. Quality Conveyors Since 1948

American Made and American Engineered. Quality Conveyors Since 1948 American Made and American Engineered Quality Conveyors Since 1948 Design and Construction Features ToughTrak Tough and Durable Low Profile Conveyors ToughTrak low profile conveyors are lean and mean working

More information

American Made and American Engineered. Quality Conveyors Since 1948

American Made and American Engineered. Quality Conveyors Since 1948 American Made and American Engineered Quality Conveyors Since 1948 Design and Construction Features ToughTrak Tough and Durable Low Profile Conveyors ToughTrak low profile conveyors are lean and mean working

More information

9000 Series Uni-Belt Technical Specifications

9000 Series Uni-Belt Technical Specifications Design Elements: The 9000 Series Uni-Belt conveyor is designed and engineered to meet specific requirements for load, unload, and transport needs of the baggage handling industry. Rugged and versatile,

More information

S ST-SeriesBrochure_modified:STSeriesBrochure.qxd2/4/20091:32PMPage17 ST- T Series Straight Conveyors -Series your Material Handling Specialist

S ST-SeriesBrochure_modified:STSeriesBrochure.qxd2/4/20091:32PMPage17 ST- T Series Straight Conveyors -Series your Material Handling Specialist ST-Series ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009 1:32 PM Page 17 ST-Series Straight Conveyors your Material Handling Specialist ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009

More information

McKenzie s Low Profile Modular Belt Conveyor provides the design flexibility needed to meet your requirements.

McKenzie s Low Profile Modular Belt Conveyor provides the design flexibility needed to meet your requirements. McKenzie Handling Systems has been designing and manufacturing standard and custom belt conveyors since its incorporation in 1985. Belt types for all your applications Permanently Sealed Bearings T-slots

More information

Lineshaft. Driven. Live Roller Conveyors (989)

Lineshaft. Driven. Live Roller Conveyors (989) Lineshaft Live Driven Lineshaft Driven Live 24 Hour Shipment available on specific sizes. Consult a sales engineer for further information. General Operating Principle: General operation of the Lineshaft

More information

Elevators & Conveyors

Elevators & Conveyors Elevators & Conveyors Commercial Series 1 Your Complete Systems Manufacturer. Series 1 GSI Chain Conveyors Our material handling division can provide you with an extensive line of chain conveyors to meet

More information

PLASTIC BELT CONVEYOR

PLASTIC BELT CONVEYOR PLSTIC LT CONVYOR SCTION CONTNT Straight Curve Optional quipment and evices 87 PC PLSTIC LT CONVYOR WHY PC? No belt tracking required Modular belting is easily replaceable for one section or an entire

More information

CV-Series. Single Curve Conveyors

CV-Series. Single Curve Conveyors CV-Series Single Curve Conveyors J O I N T H E Q U I E T R E V O L U T I O N I N C O N V E Y O R T E C H N O L O G Y V-Series Engineered to have the tightest turning radius in the industry. Built for nearly

More information

Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask

Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask GravitymANUAL Table of Contents Roller Conveyor Skatewheel & Flow Rail Ball Transfer Tables Accessories Frame Options Common Terms Questions to Ask 2 3 4 5 7 9 11 ROLLER CONVEYOR 2 Based on their almost

More information

Multi-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value

Multi-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax

More information

Hytrol's ABC Conveyor Book

Hytrol's ABC Conveyor Book Hytrol's ABC Conveyor Book WHAT IS A CONVEYOR? A conveyor moves material. A conveyor moves cardboard boxes, wood boxes, metal boxes and plastic boxes. A conveyor can move material This is called a GRAVITY

More information

Standard-Duty Low-Profile Conveyors - SLPC

Standard-Duty Low-Profile Conveyors - SLPC Standard-Duty Low-Profile Conveyors - SLPC Requiring only 1 13 / 16 inch in clearance to the top of the belt, these rugged low-profile conveyors are built to withstand the punishment of even punch presses

More information

Heavy-duty, double row, pillow block, roller bearings mounted externally. (Optional fully split bearing available) Page 2

Heavy-duty, double row, pillow block, roller bearings mounted externally. (Optional fully split bearing available) Page 2 Bucket Elevators & Conveyors Total Value. Total Systems. Bucket Elevator Heads The jib boom is available in 1/2 ton, 1 ton, and 2 ton models. It features a heavy-duty bolt on design, and is a cost effective

More information

The ORIGINAL extruded-aluminum-frame conveyor. American Made and American Engineered

The ORIGINAL extruded-aluminum-frame conveyor. American Made and American Engineered American Made and American Engineered The ORIGINAL extruded-aluminum-frame conveyor The Diebel Series The Diebel Series of Conveyors are designed to offer an economical method of transporting small, lightweight

More information

HO-Series Horizontal Offset Conveyors

HO-Series Horizontal Offset Conveyors HO-Series Horizontal Offset Conveyors your Material Handling Specialist HO-Series Engineered for dependable, nearly maintenance-free operation. Flexibility in turning radius and straight length for almost

More information

Index. Purchase guide. Belt conveyor. Elevator Belt conveyor. Modular belt conveyor. Stainless steel belt & slat chain conveyor. Accessories & options

Index. Purchase guide. Belt conveyor. Elevator Belt conveyor. Modular belt conveyor. Stainless steel belt & slat chain conveyor. Accessories & options belts SOMEFI is a company dedicated to the manufacture and sale of conveyors and modular handling equipment. For more than 40 years SOMEFI has offered a complete range of industrial conveyors, of flexible

More information

PACKAGED PROCESSED RAW MATERIALS. Red Meat. Type Construction. Frame. Belt. Modular. Belt. Stainless Steel. Plastic Stainless Steel.

PACKAGED PROCESSED RAW MATERIALS. Red Meat. Type Construction. Frame. Belt. Modular. Belt. Stainless Steel. Plastic Stainless Steel. CONVEYOR OVERVIEW From packaging to processing, Dorner has the food industry covered. By offering three series of sanitary conveyors AquaGard, AquaPruf and AquaPruf Ultimate Dorner can meet virtually any

More information

Section Content. Bolt-Together Straight Bolt-Together Incline/Decline Welded Straight Belt Curve Optional Equipment and Devices

Section Content. Bolt-Together Straight Bolt-Together Incline/Decline Welded Straight Belt Curve Optional Equipment and Devices elt onveyor Section ontent olt-together Straight olt-together Incline/ecline Welded Straight elt urve Optional quipment and evices P.O. ox 352 lpena, Michigan 49707 Phone 989.358.7000 ax 989.358.7020 info@omni.com

More information

Tailor Fit Accessories for Your Needs Ease of Automation & Guiding

Tailor Fit Accessories for Your Needs Ease of Automation & Guiding 7350 Series: STANDARD FEATURE OVERVIE Improve your bottom line results with industry leading speeds, best in class product transfers, and ease of automation. Tailor Fit Accessories for Your Needs Ease

More information

Why 24v? Case Handling. Pallet Handling. Accessories. Motor Driven Roller. Flat Motor Driven Roller Conveyor. Conveyor

Why 24v? Case Handling. Pallet Handling. Accessories. Motor Driven Roller. Flat Motor Driven Roller Conveyor. Conveyor Why 24v? Power savings: Since it is run on demand (meaning when a package or part is not present in a zone the zone shuts down) a 24V system uses very little power. Some studies suggest a 40-80% power

More information

Turntables (989) Turntables Conveyors. Low Profile Manual Turntables (LPMT) Manual Turntables

Turntables (989) Turntables Conveyors. Low Profile Manual Turntables (LPMT) Manual Turntables Conveyors Low Profile Manual (LPMT)... 236 Manual... 237-235 Powered -... 238 Low Profile Manual (LPMT) A valuable accessory for ergonomic work stations or for confined working areas. These turntables

More information

Webb-Stiles Enclosed Track

Webb-Stiles Enclosed Track Webb-Stiles Enclosed Track Webb-Stiles Enclosed Track Conveyors utilize the Universal Enclosed Track Chain and many industry standard components for enclosed track conveyors. Enclosed Track Conveyors are

More information

STEEL, ¾ DIAMETER HEADED STUB PIN ENDS ARE MILLED FLAT TO -BELT PANS

STEEL, ¾ DIAMETER HEADED STUB PIN ENDS ARE MILLED FLAT TO -BELT PANS ONE: BALE DEWIRING CONVEYOR FEED SYSTEM MODEL CB-6-60-11-23A35-27 -HEAVY DUTY CLOSED-OPEN FRAME STYLE CONVEYOR BUILT TO INDUSTRY STANDARDS WITH A HEAVY STEEL PAN ROLLER CHAIN BELT. -BELT WIDTH 60 -BELT

More information

BAKERY SNACK FOODS CONFECTIONARY FRUITS VEGETABLES NON-PROTEIN READY-TO-EAT 7400U 7400U. Conveyor Selection Chart. AquaGard.

BAKERY SNACK FOODS CONFECTIONARY FRUITS VEGETABLES NON-PROTEIN READY-TO-EAT 7400U 7400U. Conveyor Selection Chart. AquaGard. CONVEYOR OVERVIEW From packaging to processing, Dorner has the food industry covered. By offering three series of sanitary conveyors AquaGard, AquaPruf and AquaPruf Ultimate Dorner can meet virtually any

More information

Belt Conveyor System. The Just-in-Time (JIT)

Belt Conveyor System. The Just-in-Time (JIT) 24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,

More information

Washdown & Sanitary Conveyors

Washdown & Sanitary Conveyors Washdown & Sanitary Conveyors Sanitary Dyna-Belt Conveyors Power Belt Series Capacity: Mid Range Effective Belt Width: 3 to 36 OAL 24 to 100 Design Type: Modular, Kitted Construction : Modular Washdown

More information

CONTROLS SPEC SHEET CATALOG ACCESSORIES & ELECTRICAL

CONTROLS SPEC SHEET CATALOG ACCESSORIES & ELECTRICAL SPEC SHEET CATALOG ACCESSORIES & ELECTRICAL CONTROLS Ultimation Industries LLC 15935 Sturgeon St. Roseville, MI 48066 Ph. +1-586-771-1881 ultimationinc.com All safety guarding to be safety yellow unless

More information

CONVEYING COMPONENTS 03/06/06

CONVEYING COMPONENTS 03/06/06 CONVEYING COMPONENTS 03/06/06 PART NUMBER DESCRIPTION LIST F9-22-31-2-0 ZINC HEX NUT 1" UNC 1.365 0013200600 ROUND RED CAPPING FOR CURVE 5-MTR. 3.675 0013200600X1.5 ROUND RED CAPPING FOR OILER 7.7726 004217.20

More information

4", 8", 12", 18", 24" Belt Conveyor Specifications

4, 8, 12, 18, 24 Belt Conveyor Specifications 4", 8", 12", 18", 24" Belt Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Stainless Steel #4 polish finish

More information

A A B B B C C CC. Bulletin Number 608 Price $10.00 HYTROL CONVEYOR CO., INC. JONESBORO, ARKANSAS COPYRIGHT 2008 HYTROL CONVEYOR CO., INC.

A A B B B C C CC. Bulletin Number 608 Price $10.00 HYTROL CONVEYOR CO., INC. JONESBORO, ARKANSAS COPYRIGHT 2008 HYTROL CONVEYOR CO., INC. Bulletin Number 608 Price $10.00 The A A A B B B C C CC Conveyor Book* "This book will help you to talk about HYTROL CONVEYORS... and help you SELL THEM! HYTROL CONVEYOR CO., INC. JONESBORO, ARKANSAS COPYRIGHT

More information

MicroSpan. Transfers. Transfers. 1 revised SpanTech LLC

MicroSpan. Transfers. Transfers. 1 revised SpanTech LLC Transfers MicroSpan Transfers 1 revised -7 revised -7 2 Contents Overview... 4 Nose Bar Dimensions... MicroSpan Chain Types... 6 MicroSpan Features... 7 Power Transmission... 7 Variable Angles... 8 Lift

More information

Section VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View

Section VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View EAF Conveyor - Assembled View 54 EAF Conveyor - Dimensional Drawing 15.4" 7.4" BW+14.2" BW+9" 12.6" 22" Leg #1 A 15" Leg #2 4" BW+4.1" BW 3.4" Discharge Belt Height 4.2" Infeed Belt Height 1.5" 55 56 EAF

More information

INVEST IN EFFICIENCY. HI LIFE MODELS 18 72

INVEST IN EFFICIENCY. HI LIFE MODELS 18 72 INVEST IN EFFICIENCY. HI LIFE MODELS 18 72 Hi Roller Enclosed Belt Conveyors are heavy duty, low maintenance, safe, gentle, and efficient. Hi Roller uses unique idlers which allow all bearings to be isolated

More information

Bucket Elevators & Conveyors

Bucket Elevators & Conveyors Bucket Elevators & Conveyors Bucket Elevator Heads GSI's bucket elevators & conveyors are engineered to perform and built tough to provide years of reliable service. Whether your business is industrial

More information

INTERROLL 24VDC PRODUCTS ROLLERDRIVES & DRIVECONTROL CARD

INTERROLL 24VDC PRODUCTS ROLLERDRIVES & DRIVECONTROL CARD P PRODUCT R O D U C T I NINFORMATION F O R M A T I O N INTERROLL 24VDC PRODUCTS ROLLERDRIVES & DRIVECONTROL CARD INTERROLL EC100 24VDC ROLLERDRIVE Product Features Wide speed range Multiple drive options

More information

Engineering Class Sprockets

Engineering Class Sprockets Engineering Class Sprockets 28 Engineering Class Sprockets Renold Jeffrey replaceable sprockets and traction wheels are specially designed for the realities of high-stress, heavy-duty service. A variety

More information

ADDENDUM NO. 1 FOR SPECIFICATION NO.: RFQ NO.: 3358 FOR DIESEL-POWERED SALT CONVEYOR

ADDENDUM NO. 1 FOR SPECIFICATION NO.: RFQ NO.: 3358 FOR DIESEL-POWERED SALT CONVEYOR ADDENDUM NO. 1 FOR SPECIFICATION NO.: 77818 RFQ NO.: 3358 FOR DIESEL-POWERED SALT CONVEYOR For which bids were scheduled to open in the Bid and Bond Room, City Hall, 121 North La Salle Street, Room 301,

More information

401-T Conveyor with Turntable Specifications Wash-down Model

401-T Conveyor with Turntable Specifications Wash-down Model Morris Machine and Conveyor is a Specialist in Material Handling Systems for use in Packaging Applications. We have over 15 years experience designing and building standard and custom Conveyor Systems.

More information

3.25, 4.5, 7.5 Tabletop Conveyor Specifications

3.25, 4.5, 7.5 Tabletop Conveyor Specifications 3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder

More information

SPECIFICATIONS & DATA. October 2005

SPECIFICATIONS & DATA. October 2005 SPECIFICATIONS & DATA October 2005 UNEX GRAVITY SPECIFICATIONS & DATA BOOK 10.05 Table of Contents Skatewheel Conveyor Series SW Straight Sections 2 Curves & Spurs 3 1-3/8 Dia. Roller Conveyor Series

More information

Quality Conveyors Since 1948 PlastiTrak Plastic Belt Conveyors

Quality Conveyors Since 1948 PlastiTrak Plastic Belt Conveyors Quality Conveyors Since 1948 PlastiTrak Plastic Belt Conveyors American Made and American Engineered PlastiTrak Catalog Table of Contents Photo Model Application Page 1000-S This conveyor is commonly used

More information

TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES

TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES MODEL NO. 44220-60001 & UP FORM NO. 01-505-1741 Rev. A PARTS CATALOG TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES BASE & FRAME ASSEMBLY 1800-3 Part 1 92-4350 Frame - Topdresser 1 2 92-4364 Bracket

More information

FMB-DDSP Belt for High Load and Low Load Pulleys

FMB-DDSP Belt for High Load and Low Load Pulleys FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30

More information

ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data

ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading

More information

HINGE BELT CONVEYOR FUNCTIONS AREA OF APPLICATION

HINGE BELT CONVEYOR FUNCTIONS AREA OF APPLICATION HINGE BELT CONVEYOR AREA OF APPLICATION Transportation of metal shavings and from machine tools. Suitable for long steel shavings, snarl chips, wool chips, dry processing and wet processing. Installation

More information

Webb Chain Conveyors. Technical Selection Guide for Conveyor Components. Power Only Overhead and Inverted Conveyors. Hand Pushed Trolleys

Webb Chain Conveyors. Technical Selection Guide for Conveyor Components. Power Only Overhead and Inverted Conveyors. Hand Pushed Trolleys Webb Chain Conveyors Technical Selection Guide for Conveyor Components Power Only Overhead and Inverted Conveyors Hand Pushed Trolleys Chain-on-Edge Floor Conveyors ISO 9001 Registered Our mission is to

More information

Catalog No. CC103. Power Belt Conveyors. Skatewheel Conveyors. Roller Conveyors. Replacement Rollers. Supports. Telescoping Conveyors.

Catalog No. CC103. Power Belt Conveyors. Skatewheel Conveyors. Roller Conveyors. Replacement Rollers. Supports. Telescoping Conveyors. Power Belt Skatewheel Replacement s Supports Telescoping Ball Tables Catalog No. CC103 Accessories THIS PAGE INTENTIONALLY LEFT BLANK 2 Ashland Conveyor Products has been producing quality conveyors for

More information

LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.)

LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.) LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.) 1 23-55-0021 NYLON FLAIL BRUSH ROTOR COMPL. 1 2 23-25-2400 ROTOR SHAFT (48 7/8" LG) 1 3 23-22-1400 HAMMER SUPPORT 90 4 NC17-46-0020 NYLON HAMMER

More information

What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features

What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features ROLLERmANUAL Table of Contents What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features Applications Questions to Ask 2

More information

UP TO 20,000 BPH (500 METRIC TONS PER HOUR)* *capacities are subject to product and product condition

UP TO 20,000 BPH (500 METRIC TONS PER HOUR)* *capacities are subject to product and product condition BUCKET ELEVATORS NORSTAR BUCKET ELEVATORS CUSTOM DESIGN Norstar Bucket Elevators are designed to provide you with maximum throughput and long lasting performance for a wide variety of bulk material handling

More information

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain

1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain 1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive

More information

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N] Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5

More information

Tel: (905) Fax: (905) CHAIN TRANSFER CONVEYOR OWNERS MANUAL

Tel: (905) Fax: (905) CHAIN TRANSFER CONVEYOR OWNERS MANUAL Tel: (905) 624-6499 Fax: (905) 624-0228 CHAIN TRANSFER CONVEYOR OWNERS MANUAL THIS PAGE LEFT BLANK INTENTIONALLY Table of Contents INTRODUCTION... 5 SAFETY WARNINGS... 7 BEFORE STARTING MAINTENANCE...

More information

Chain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.

Chain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only. ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS

GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS. 112000-115499 1 DISCHARGE ASSEMBLY - GRAIN BELT DRIVE OVER CONVEYOR SERIAL NOS. 112000-115499 2 REF # PART NO. DESCRIPTION QTY 1 C200760 Discharge Weldment

More information

Automatic Belt Tracking and Conveyor Systems Equipment

Automatic Belt Tracking and Conveyor Systems Equipment Automatic Belt Tracking and Conveyor Systems Equipment Presentation Outline 1. Company overview 2. Our products 3. Conveyor belt tracking 4. Tracker models 5. What we need for design 6. What we need for

More information

Belt Conveyors GUF-P MINI

Belt Conveyors GUF-P MINI Belt Conveyors GUF-P MINI Conveyor frame profiles mk 2075 mk 2100 mk 2150 22 The minimal install height, as well as the lower walls for direct placement of the conveyor on the machine bed, are ideal for

More information

THE TABLE OF CONTENTS

THE TABLE OF CONTENTS ROLLER CATALOG THE TABLE OF CONTENTS General Information Page Sizes and 2 Retention and 2 Construction 2 Bearing Features and Lubrication 2 Sprocket Information 2 Groove Information 3 Load Capacity Reference

More information

A1062 & A1072 AUGER ASSEMBLY MANUAL. Read & understand all instructions pertaining to this auger prior to use!

A1062 & A1072 AUGER ASSEMBLY MANUAL. Read & understand all instructions pertaining to this auger prior to use! A1062 & A1072 AUGER ASSEMBLY MANUAL Read & understand all instructions pertaining to this auger prior to use! Safety Alert Watch for this ALERT Symbol. It identifies potential hazards to Personal SAFETY

More information

SECTION AXIAL HVAC FANS

SECTION AXIAL HVAC FANS SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

HUTCHINSON. Bin unloading systems

HUTCHINSON. Bin unloading systems HUTCHINSON Bin unloading systems Sweep Options Std. Klean Sweep Commercial Sweep Std. Power Sweep HD Power Sweep Commercial Power Sweep NexGen Sweep Unloading Options Standard Auger Unload Commercial Auger

More information

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can

More information

PARTS PARTS SECTION FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6 CABLE DRUM... 8 TUNNEL (BAG BOOM OPTION) CONVEYOR GROUP...

PARTS PARTS SECTION FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6 CABLE DRUM... 8 TUNNEL (BAG BOOM OPTION) CONVEYOR GROUP... AG-BAGGER PART S MANUAL MODELS G-6000 A,B,C,D 2320 SE AG-BAG LANE WARRENTON, OR. 97146 INT L (503) 861-1644 US 1-800-334-7432 FAX (503) 861-2527 PARTS FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6

More information

Tel: (905) Fax: (905) CDLR CONVEYOR OWNERS MANUAL

Tel: (905) Fax: (905) CDLR CONVEYOR OWNERS MANUAL Tel: (905) 624-6499 Fax: (905) 624-0228 CDLR CONVEYOR OWNERS MANUAL Table of Contents INTRODUCTION... 3 SAFETY WARNINGS... 5 BEFORE STARTING MAINTENANCE... 5 DURING MAINTENANCE... 5 AFTER MAINTENANCE...

More information

443 / M440 Series Lineshaft Driven Live Roller Conveyor Installation and Maintenance Manual

443 / M440 Series Lineshaft Driven Live Roller Conveyor Installation and Maintenance Manual 443 / M440 Series Lineshaft Driven Live Roller Conveyor Installation and Maintenance Manual Metzgar Conveyor Co. - 2010 METZGAR CONVEYORS SAFETY PRECAUTIONS WARNING: DO NOT ATTEMPT MAINTENANCE ON ANY CONVEYORS

More information

Section K WC1335 AND WC15 SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE INDEX

Section K WC1335 AND WC15 SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE INDEX INDEX Section K WC33 AND WC SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE Description Page WC33 basic conveyor... K2-3 WC basic transfer... K4- WC70 basic tube... K-7 WC80 basic tube... K8-9 WC90 basic

More information

SARAVEL CENTRIFUGAL FANS For Airconditioning & Industrial Application

SARAVEL CENTRIFUGAL FANS For Airconditioning & Industrial Application CAT.NO. 120-97 SARAVEL CENTRIFUGAL FANS For Airconditioning & Industrial Application TABLE OF CONTENTS Introduction......3 Selection Examples......4-5 Correction Factors......6 Rating Tables.........7-17

More information

Integration in Tight Spaces Small Parts Transfers Sortation Machine Part Handling Curing, Cooling, Heating & Cleaning

Integration in Tight Spaces Small Parts Transfers Sortation Machine Part Handling Curing, Cooling, Heating & Cleaning CONVEYOR OVERVIEW Conveyor Comparison / Selection Chart Application Requirements Packaging Print/Labeling/ Marking Plastic Injection Molding Automated & Manual Assembly Magnetic & Vacuum Capabilities Integration

More information

Cross Tensioners. Frames. Bearings. Springs. Mounting Holes. Adjustment Marks

Cross Tensioners. Frames. Bearings. Springs. Mounting Holes. Adjustment Marks Cross Tensioners Cross Tensioners provide constant belt or chain tension. Their automatic tensioning action translates into improved performance and extended life for most types of fixed-centre drives.

More information

PERMANENT OVERHEAD MAGNETS

PERMANENT OVERHEAD MAGNETS PERMANENT OVERHEAD MAGNETS Self-Cleaning Stationary RECYCLING MINING/AGGREGATE FOUNDRY COAL CONSTRUCTION/DEMOLITION ELECTRONICS RECYCLING Self-Cleaning Continuous Removal Permanent overhead magnets are

More information

Baggage Handling Conveyors

Baggage Handling Conveyors Baggage Handling s Geo. Robson & Co. Airport Baggage Mechanical Handling Solutions offer the ultimate for speed, reliability, robustness and product life. With a range of conveying solutions to suit the

More information

Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute

Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications

More information

Tailor Fit Accessories for Your Needs Ease of Automation & Guiding

Tailor Fit Accessories for Your Needs Ease of Automation & Guiding 7360 Series: STANDARD FEATURE OVERVIE Improve your bottom line results with industry leading speeds, best in class product transfers, and ease of automation. Tailor Fit Accessories for Your Needs Ease

More information

mk Roller Conveyors mk Conveyor Technology 240

mk Roller Conveyors mk Conveyor Technology 240 mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology

More information

SSV TM100 - SSV TM215 DRUM MOTORS 4.0" to 8.5" diameter 0.11 to 7.5 hp SANITARY DRUM MOTORS

SSV TM100 - SSV TM215 DRUM MOTORS 4.0 to 8.5 diameter 0.11 to 7.5 hp SANITARY DRUM MOTORS Engineered to Keep Your Business Running SSV TM100 - SSV TM215 DRUM MOTORS 4.0" to 8.5" diameter 0.11 to 7.5 hp SANITARY DRUM MOTORS BELT PULL (BP) = (F0 + F1 + F2) Roller Bed Conveyor Slider Bed Conveyor

More information

GSI MATERIAL HANDLING BUCKET ELEVATORS & CONVEYORS PROVEN & DEPENDABLE

GSI MATERIAL HANDLING BUCKET ELEVATORS & CONVEYORS PROVEN & DEPENDABLE GSI MATERIAL HANDLING BUCKET ELEVATORS & CONVEYORS PROVEN & DEPENDABLE WWW.GRAINSYSTEMS.COM From seeding to harvest, we recognize the hard work and determination you put in every day of the year. It s

More information

INSTALLATION AND MAINTENANCE MANUAL V-BELT DRIVEN LIVE ROLLER CONVEYOR

INSTALLATION AND MAINTENANCE MANUAL V-BELT DRIVEN LIVE ROLLER CONVEYOR INSTALLATION AND MAINTENANCE MANUAL V-BELT DRIVEN LIVE ROLLER CONVEYOR MODEL VBS19, VBC19, VBCS19 AND VB SS19 VBC19 VBS19 VBS19 VBCS19 VBS19 Version 2014.1 - - TABLE OF CONTENTS INTRODUCTION Receiving,

More information

Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts

Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts 14.0 INTRODUCTION Tray Box Former This section lists and illustrates the replaceable assemblies and parts of the Tray Box Former as manufactured by Each parts list contains the component parts for that

More information

AG-BAGGER MODELS G6060A G6060B G6060C G6070B G6070C PB6000

AG-BAGGER MODELS G6060A G6060B G6060C G6070B G6070C PB6000 AG-BAGGER MODELS G6060A G6060B G6060C G6070B PB6000 1 Ag-Bag International, Ltd. Bag Boom & Cradle Use the bag boom and cradle for easy bag installation. The maximum lift capacity of the bag boom is 500

More information

Please make your selections below to view, search or print ACCO Material Handling Solutions WRIGHT SPEEDWAY and WRIGHT WORK-RATED product pages.

Please make your selections below to view, search or print ACCO Material Handling Solutions WRIGHT SPEEDWAY and WRIGHT WORK-RATED product pages. Contact Information Welcome! Please make your selections below to view, search or print ACCO Material Handling Solutions WRIGHT SPEEDWAY and WRIGHT WORK-RATED product pages. 1T to 5T THE NEW CENTURY SERIES

More information

For more information about the lift frame, check under Lift frame section.

For more information about the lift frame, check under Lift frame section. Table of Contents Heavy Duty Trip Edge Blade Trip Edge Blade Assembly...2 Power Angling Assembly...7 Trip Edge Wing Assembly. 13 Important note: Lift frames for this specific blade are listed below: Lift

More information

A Flex Low Profile Automatic Performance Features

A Flex Low Profile Automatic Performance Features LP A Flex A models eliminate the need for operators to attach and cut the stretch film. Simply place the pallet load on the machine, and pull a lanyard switch while backing away. The machine will perform

More information

ELEVATING UNDERCAR CONVEYOR 12" & 16" FLUSH - TYPE

ELEVATING UNDERCAR CONVEYOR 12 & 16 FLUSH - TYPE ELEVATING UNDERCAR CONVEYOR 12" & 16" FLUSH - TYPE OWNER'S MANUAL 19013200 (10/97) Contents Introduction.................................... 1 Warnings...................................... 1 Statement

More information

Belts for the Confectionery Industry. Your business is our business!

Belts for the Confectionery Industry. Your business is our business! NA Your business is our business! Belts for the Confectionery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery www.ammeraalbeltech.com We know your production

More information

MEYER MATE 9.0 CU FT. SPREADER

MEYER MATE 9.0 CU FT. SPREADER MEYER MATE 9.0 CU FT. SPREADER General Specifications Overall Height: 41.25" Overall Width: 49.5" Overall Depth: 32" Weight Empty: 140 lbs. Spreading Width: Minimum 3 Maximum 30 Spreading Material: Dry

More information

William Kenyon. Your Single Source For Paper Machine Threading

William Kenyon. Your Single Source For Paper Machine Threading William Kenyon Your Single Source For Paper Machine Threading Your Single Source For Paper Machine Threading ROPE SHEAVES ROPE TENSIONERS KNIVES & SLITTERS CARRIER ROPE VACUUM CONVEYORS CALENDER THREADERS

More information

78002, 78005, Hopper Spreader Components

78002, 78005, Hopper Spreader Components Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com February 1, 20 Lit. No. 94192, Rev. 78002, 78005, 78008 Hopper Spreader Components ICE CHASER Hopper Spreader Parts List This Parts

More information

MKX 130 Series Augers

MKX 130 Series Augers . MKX 130 Series Augers Steel Trussing Trussing provides maximum strength and stability at all heights. Steel trussing on 84', 94' & 114' units increase tube rigidity and ensure smooth operation. Powder

More information

OPTIONAL EQUIPMENT. Section F INDEX

OPTIONAL EQUIPMENT. Section F INDEX INDEX Section F OPTIONAL EQUIPMENT Description Page Inclined hopper, H08-/ and H-/... F2- Straight hopper, SWH...F Swivel arc kit, A...F Wheel kit, H08-, H- and H1-...F Inclined hopper, S08-/, S-/ and

More information

For the world. IHI delivers big power for urban projects.

For the world. IHI delivers big power for urban projects. For the world. IHI delivers big power for urban projects. Introducing the zero tail swing excavator 80NX. The 80NX has joined IHI's zero tail swing lineup. It incorporates the power of a 0.25m 3 -class

More information

2. Lay bed sections on floor, upside down and in sequence, according to number with all arrows pointing in the same direction.

2. Lay bed sections on floor, upside down and in sequence, according to number with all arrows pointing in the same direction. Assembly/Operating Instructions with Parts List Bulletin No. 481 MODEL PC December, 2000 (Supercedes April, 1998) RECOMMENDED SPARE PARTS LIST HIGHLIGHTED IN GRAY MODEL "PC" PARTS CONVEYOR PORTABLE OR

More information

Best Diversified Products, Inc. Product Manual. BestReach Rigid Belt. Models BRB 230 OS BRB 230 SS BRB 460 OS BRB 460 SS

Best Diversified Products, Inc. Product Manual. BestReach Rigid Belt. Models BRB 230 OS BRB 230 SS BRB 460 OS BRB 460 SS Best Diversified Products, Inc. Product Manual TM BestReach Rigid Belt Models BRB 230 OS BRB 230 SS BRB 460 OS BRB 460 SS Best Diversified Products Inc. 107 Flint Street Jonesboro, AR 72401 Phone 870-935-0970

More information