SPROCKETS for belts series
|
|
|
- Timothy Owens
- 5 years ago
- Views:
Transcription
1 eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier to clean and to disinfect These sprockets can be used for belt widths up to 680 and temperature diefferences of maximum. For wider belts or bigger temperature differences, sprockets with square bores or round bore with two keyway have to be used. pecial shape of teeth compensates natural belt lengthening after prolonged use GF F F F F GF F F F F GF F F
2 eite 2 von F F GF F F F F 40 *Plain Bore PROKET for belts series TANDARD PROKET DOUBLE KEYWAY Material: polyamide, DIN 6885 key seat. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. pecial shape of teeth compensates natural belt lengthening after prolonged use. Reduced noise level and quiet operation ompletely closed structure, easier to clean and to disinfect GF F F GF F F GF F F 40
3 eite 3 von GF F F 40 PROKET for belts series PLIT PROKET QUARE BORE Material: polyamide, screws in stainless steel. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. pecial shape of teeth compensates natural belt lengthening after prolonged use. ompletely closed structure, easier to clean and to disinfect F F F F F F F F F F F Q x x x x PROKET for belts series
4 eite 4 von 7 TANDARD PROKET QUARE BORE Material: polyamide. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. pecial shape of teeth compensates natural belt lengthening after prolonged use. ompletely closed structure, easier to clean and to disinfect F F F F F F F F F F F Q x x x x PROKET for belts series
5 eite 5 von 7 PLIT PROKET INGLE KEYWAY Material: reinforced polyamide, screws in stainless steel, nut in nickel plated brass. ompletely closed structure, easier to clean and to disinfect To order single keyway sprockets capable of floating freely on the shaft (i.e. bore tolerance +0.3 /+0.5), just add the letter "P" (=plus) to the existing part number. For example, code 1215P. B PROKET for belts series
6 eite 6 von 7 PLIT PROKET DOUBLE KEYWAY Material: reinforced polyamide, screws in stainless steel, nut in nickel plated brass. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. ompletely closed structure, easier to clean and to disinfect B PROKET for belts series
7 eite 7 von 7 PLIT PROKET QUARE BORE Material: reinforced polyamide, screws in stainless steel, nut in nickel plated brass. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. ompletely closed structure, easier to clean and to disinfect B 1223 x x x
CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
CHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
Profile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
Rex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
CHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
Rexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
Rexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
Roller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
Hytrol's ABC Conveyor Book
Hytrol's ABC Conveyor Book WHAT IS A CONVEYOR? A conveyor moves material. A conveyor moves cardboard boxes, wood boxes, metal boxes and plastic boxes. A conveyor can move material This is called a GRAVITY
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
DIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
Air Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
Complementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
SPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS
AND DEIGNED FOR ROLLER The range of sprockets and wheels designed for chains manufactured by our Company provides an all-round solution to the needs of industry in the sector of flexible mechanical transmissions
POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
A A B B B C C CC. Bulletin Number 608 Price $10.00 HYTROL CONVEYOR CO., INC. JONESBORO, ARKANSAS COPYRIGHT 2008 HYTROL CONVEYOR CO., INC.
Bulletin Number 608 Price $10.00 The A A A B B B C C CC Conveyor Book* "This book will help you to talk about HYTROL CONVEYORS... and help you SELL THEM! HYTROL CONVEYOR CO., INC. JONESBORO, ARKANSAS COPYRIGHT
ZAPEX ZN Series. 5/2 Overview. 5/2 Benefits. 5/2 Application. 5/2 Design. 5/2 Function. 5/3 Technical data
Siemens G 201 Torsionally Rigid Gear Couplings ZEX ZN Series /2 Overview /2 Benefits /2 pplication /2 Design /2 Function /3 Technical data /4 Type ZNN /4 Selection and ordering data / Type ZNZS / Selection
1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
WEIGHT. Reduction ratio 2:1 3:1 4:1 5:1 6:1 7:1. Max Input Speed
OFFSET SPUR GEAR REDUCERS HPCFF10 ø15 HPCFF10 HPCFF10-2 2:1 93 2000 1000 1.55 125.88 HPCFF10-3 3:1 93 2000 666 1.49 125.88 HPCFF10-4 4:1 93 2000 500 1.33 125.88 HPCFF10-5 5:1 93 2000 400 1.27 125.88 HPCFF10-6
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
Broach Sets. No. 00 Precision Set. Collared bushings only. No. 10 Standard Set. Collared bushings only. No. 10A Standard Set. Collared bushings only
es Sets All Minute Man Sets are furnished in handsome varnished wood boxes, and come complete with precision broaches, slotted bushings, and necessary shims Collared bushings are recommended for the broach
SHERMAN UPGRADES SHERMAN SCREW KIT
SHERMAN UPGRADES TANK NOT INCLUDED. SHOWN FOR REFERENCE ONLY. SHERMAN SCREW KIT Above is the Sherman Suspension Screw Kit. Socket head screws allow easier installation and removal, and also enhance the
POM-SFL/PP POM-EC/PP
elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6
Single direction thrust ball bearings Double direction thrust ball bearings
Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...
Single action two way cross block
Connecting clamps Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail
Instruction and Installation Manual
Instruction and Installation Manual ROSTA Tensioner Devices Tensioners Accessories -G -W -R Sprocket wheel N Chain rider P Oil resistant Up to + 120 C Reinforced Sprocket wheel set Chain rider set -I -F
MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
2000 Nissan Altima SE
Removal 1. Release fuel pressure. See FUEL PRESSURE RELEASE. Drain coolant from radiator and cylinder block. Drain engine oil. Disconnect all necessary coolant hoses, electrical connectors, vacuum hoses,
Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
Offset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
TURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:
Mediana EVOLUTION SILENT LOCK FOR INTERIOR DOORS HARDWARE SYSTEMS FOR WINDOWS AND DOORS
Mediana EVOLUTION SILENT LOCK FOR INTERIOR DOORS HARDWARE SYSTEMS FOR WINDOWS AND DOORS Mediana EVOLUTION ELISA - 16 YEARS OLD - 2.30 AM COMING BACK FROM DISCO Mediana EVOLUTION Silent accomplice Mediana
CHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
MECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
Timing Drive Components ( )
Page 1 of 14 (12.65.13) Removal 1. Remove the engine front cover. For additional information, refer to For additional information, refer to. 2. Remove the spark plugs. 3. Remove the crankshaft position
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
Contents. BlackStar Bushings. BlackStar Bushings. 1
Contents Blacktar s Blacktar s Q tyle s............................................................. T s................................................................. plit Taper s...........................................................
SIZES FROM 1, ,000 NM CROWNED GEAR COUPLINGS
BZ SIZES FROM 1,300-348,000 NM CROWNED GEAR COUPLINGS GENERAL INFORMATION ABOUT R+W CROWNED GEAR COUPLINGS: CROWNED GEAR COUPLINGS BZ FIT CLEARANCE Overall shaft / hub clearance of 0.01-0.05 mm TEMPERATURE
BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
FBN/FBK Chain Couplings
s FBN/FBK Order Example FBN 4012 D20 FBK 4012 D20 (for New JIS Key) (for Old JIS Key) Semi-F supported FBN5014D20 (inner diameter D20) FBN5014D30 (inner diameter D30) Type Model Shaft Hole Diameter Conveyor
50 years of Reliable Field History
Coupling Comments The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 10 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
Order No light grey. Order No black
DPP- Plastic dome plug Body: Polyamide (V2 acc. to UL94) Sealing: Neopren Dynamic: -20 ~+80, short term:100 _ Easy and quick assembly Color: RAL7001 silver grey RAL7035 light grey RAL9005 black Blue, Red
Ball Valves. Full Ported Very low pressure drop. Polyamide Thrust Bearings Low actuation torque and high
Features and Advantages Introduction The Parker High Pressure all Valve Product Line serves in applications ranging from 3000 to 10,000 PI. Included in this section is the eries VAL, especially designed
Heavy-Line. GU System
GU ystem Guide rails GU..M, GU..MT GU...MT 90 ± 0' G H c h g sm b + 0,05 D I I GU...M 90 ± 5' L 0,02 H c h b + 0,05 0, 0,02 The longitudinal slot, made with + 0.05 tolerance, permits using reference elements
1999 Nissan Altima GLE
TIMING CHAIN CAUTION: If cylinder head is installed and timing chain is disconnected, DO NOT rotate camshaft or crankshaft; valves will contact pistons, resulting in bent valves. NOTE: Following procedure
DEWA NON-METALLIC CHAIN SCRAPER SYSTEM
DEWA NON-METALLIC CHAIN SCRAPER SYSTEM DEWA non-metallic chain has been developed with vast experiences and utilising modem hi-technologies. DEWA chain is quite similar to the conventional steel chain
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Download the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
Series 12 S01 V Single Nozzles, Valve Gate Ø12. P Products. C Company. T Technology. A Application
eries 1 ingle Nozzles, alve Gate ompany roducts echnology pplication eries 1 ingle nozzles, valve gate roduct type ot runner nozzles in the 1... range; this series belongs to nozzle class 1). ènozzle size
uni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
REMOVAL & INSTALLATION
Page 1 of 11 REMOVAL & INSTALLATION TIMING BELT Tips Click a link to view tip Tech1 Question: Timing problems P0340 Tech1 Question: 2.2 TIMING PROBLEMS - RESOLVED Removal Tips Click a link to view tip
MGA Twin Cam Engine Assembly.
MGA Twin Cam Engine Assembly. The following article is a collection of notes of things to be observed in the assembling of MGA Twin Cam engines. To be read in conjunction with the Workshop Manual. It does
BALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
Conveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
REMOVAL & INSTALLATION
REMOVAL & INSTALLATION TIMING BELT Removal 1. Disconnect negative battery cable. Raise and support vehicle. Remove lower engine cover. On Celica and Camry, remove right front wheel. On all models, lower
FLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
Accessories Cable glands
Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:
Thrust ball bearings. - double direction
Thrust ball bearings Thrust ball bearings are manufactured in two versions: single and double direction. These bearings can carry single or double direction heavy axial loads. - single direction - double
MORFLEX COUPLINGS Double MORFLEX Series CC Hub and Block Assemblies Round steel flanges
MORFLEX COUPLINGS The MORFLEX coupling should be installed where considerable dimensional misalignment may result, or is expected. It also cushions shock loads and absorbs vibration. The MORFLEX coupling
Chain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
WAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
Battery Powered Digital Mass Flow Meters for Gases
Next Generation red-y compact: AA Battery Powered Touch Technology Micro-UB Port red-y compact series product information Battery Powered Digital Mass Flow Meters for Gases Independent digital convenience:
SPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
Rex 1701 Multiflex Chain
1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate
Assembly Instructions. General Information. Installation Instructions. 12, 15 and 20 Series Drill Small Seeds Option. Used with:
Installation Instructions! Used with: 1200, 1210 and 1220 Drills 1500, 1510 and 1520 Drills 2000, 2010 and 2020 Drills 12, 15 and 20 Series Drill Small Seeds Option When you see this symbol, the subsequent
SPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
Bellows Page 415. Overview Universal Joints. Single Universal Joints. Speeds* max. min
Overview Universal Joints Single Universal Joints Type UKM GF KE WEL RW AR WE WEN WER Material Plastic Plastic Stainless STAINLESS Bearings Bores mm 2-10 8-16 0-40 6-30 6-45, hardened 6-30, hardened 6-40
T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
Direct immersion resistance thermometer
Direct immersion resistance thermometer PLAIN STEM D100-101-102-103-160-162 CONFIGURATIONS General use RTD Product series PT100WT D100 D101 D102 D103 D160 D162 2 Features assembly The sensor can be immersed
SPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
Rex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
P R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
REMOVAL & INSTALLATION
REMOVAL & INSTALLATION TIMING BELT Removal 1. Disconnect negative battery cable. On Millenia, raise and support vehicle. Remove right front wheel. Remove lower engine covers. 2. On all models, remove accessory
tensioning systems 107
Tensioning systems 107 TENSIONING SYSTEMS TABLE OF CONTENTS Table of Contents 108 Introduction 109 Function, Principles, Handling 110 Optical Control Displays 111 Spann-Box Overview 112 113 Signs and Symbols
4 x 4 RIGID. GVW 5,000kg
4 x 4 RIGID GVW 5,000kg ISUZU ELF NPS Introduction All New ISUZU ELF NPS With superb off-road ability, outstanding power and durability, the ISUZU ELF NPS is built to deliver cost-effective operations
Motorised Valve Range
Motorised Valve Range Contents Motorised Valves... 2 Fail Safe Motorised Valves for Bio Diesel and Bio Fuels... 2 Fail Safe Motorised Valves... 3 Motor-Open Motor-Close... 6 Electro-Thermal Links... 9
Screw-in RTD temperature probes with plug connector
Data sheet 902040 Page 1/6 s with plug connector Temperature range from -50 to +270 C Shakeproof design Application areas: utility vehicles, construction and agricultural machinery, motors, compressors
Undercarriage WEAR AND CARE GUIDE
Undercarriage WER N RE GUIE The eere design pproximately 20 percent of your crawler s purchase price is for the undercarriage. More importantly, nearly 50 percent of your maintenance costs will go into
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
KONE EcoMod Escalator Repair Instructions
3.3 Replace drive motor NOTE! When moving the step band during the following procedures, always run the escalator on inspection (use hand held pendant control). 3.3.1 Remove drive motor Complete the following
RTM3 OXYGEN-THERAPY FLOWMETERS WITH FLOATING BALL
RTM3 OXYGEN-THERAPY FLOWMETERS WITH FLOATING BALL English version 09/2015 RAIL MOUNTING SYSTEMS AFNOR rail mounting systems BS rail mounting systems (neutral DIN rail mounting systems US OHMEDA rail mounting
POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
Technical Data Part-turn gearbox 2SP78
Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2
Standard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact
Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional
From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
Rexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
Gates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
Advised minimum width SLIDING ROLLERS SERIES 20
Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES
E1 Spherical Roller Bearings. The new standard for performance and operational reliability
E1 Spherical Roller Bearings The new standard for performance and operational reliability FAG s innovative E1 spherical roller bearing provides increased reliability, greater economic efficiency, and superior