Standard voltages. Alternating current (V) /60Hz Alternating current (V)

Size: px

Start display at page:

Download "Standard voltages. Alternating current (V) /60Hz Alternating current (V)"

Angela Bryan
5 years ago
Views:

Three and four pole contactors 50 to 825 (3) 200 to 250 () ontactors ontrol circuit: lternating current up to 690V irect current up to 500V egree of protection P00 (Pxx with accessories) K07K3:

1 Three and four pole contactors 50 to 825 (3) 200 to 250 () ontactors ontrol circuit: lternating current up to 690V irect current up to 500V egree of protection P00 (Pxx with accessories) K07K3: auxiliary and coil terminals originally protected against accidental contacts Protection for power contacts on request (see accessories) Terminals protected against accidental contacts according to V 006 T00, V4 K with electronic module suitable for and (50/60z) K contactors always provided with one auxiliary contact block LL (NO+N) Standards /N /N /N N UL 508 NM S S 5424 & 775 S 222/4 NL 49 N 630 S 025 UN 2009 V 0660/02 pprovals/marking Standard voltages To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit lternating current (V) Threepole contactors: K753, K083, K853 ourpole contactors: K074, K084 J K M N R S T U V W X Y Z 50z z culus () lternating current (V) ualfrequency coil Threepole contactors: ourpole contactors: /60z K753, K083, K853 K074, K084 Lloyd s Register ureau Veritas RN lternating current (V) Threepole contactors: ourpole contactors: J N U Y Z 50/60z K33 K34 ontrol circuit with rectifier bridge J N U 50z z (ontact for details) Order codes! pg 63 ux contact blocks! pg 64 ccessories & Spares! pg 65 Technical data! pg 02 imensions! pg 8 irect current (V) With electronic module (07 3 x Us) Threepole contactors: K753, K083 W W W W WJ WN Voltage lternating c / irect c (V) With electronic module (08 0 x Us) Threepole & fourpole contactors: J N U Y Voltage () K3 not UL K 62

Three pole contactors Maxopercurrent Noninductive loads Motors <440V, 3 ~ 50/60z 3 250 50 dmissible power 3 220V 380V 45V 440V 500V 230V 400V 440V kw kw kw kw kw P P P P P lectrical endurance at 3

6 75 25 35 35 50 K083 K083 35 205 65 0 25 25 32 7x0 6 88 50 70 70 80 K853 K853 35 250 450 309 600 420 700 550 75 32 32 32 60 5x0 6 00 80 80 80 220 90 60 60 85 200,x0 6 25 220 220 250 270 25 220 230

2 Three pole contactors Maxopercurrent Noninductive loads Motors <440V, 3 ~ 50/60z dmissible power 3 220V 380V 45V 440V 500V 230V 400V 440V kw kw kw kw kw P P P P P lectrical endurance at 3 Operations x ontrol circuit: lternating current at no () Pack Ref no see bottom K753 ontrol circuit: / at no () Pack Ref no see bottom K x K083 K x K853 K x ,x x x K093 K953 K03 K3 Order codes x x (2) K33 K23 Spare coil K753 K083 K853 K33 ontrol circuit with incorporated rectifier bridge K33 oil lectronic module K753 K083 K853 K953 K23 K03 K3 K753 K083 K853 K953 K23 K03 K K4 K5 K6 K7 KM4 KM5 KM6 KM7 () To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit (see 62) (2) K3 non alow the aux block in right side or reference numbers, see chapter X, pg X7 63

our pole contactors Maxoper current Noninductive loads 200 3 380V 400V dmissible power 220V 380V 45V 440V 500V 230V 400V kw kw kw kw kw kw lectrical endurance at 3 Operations 55 05 76 3 43 5 73 x0 6

304 346 06x0 6 K094 500 60 309 9 329 359 380 45 06x0 6 K954 ontactors 600 700 000 220 408 228 395 43 456 59 05x0 6 280 530 266 460 503 533 606 04x0 6 375 680 38 658 79 762 866 04x0 6 K04 K4 K24 250

3 our pole contactors Maxoper current Noninductive loads V 400V dmissible power 220V 380V 45V 440V 500V 230V 400V kw kw kw kw kw kw lectrical endurance at 3 Operations x0 6 ontrol circuit: lternating current at no () Pack Ref no see bottom K074 K074 ontrol circuit: / at no () Pack Ref no see bottom K x0 6 K084 K x0 6 K x0 6 K954 ontactors x x x0 6 K04 K4 K x0 6 (2) K34 Spare coil K074 K084 K34 ontrol circuit with incorporated rectifier bridge K oil lectronic module K074 K084 K954, K24 K04 K4 K074 K084 K954, K24 K04 K4 K5 K6 K7 KM5 KM6 KM7 () To complete the catalogue number, replace the symbol by the code corresponding to the voltage and frequency of the control circuit (see 62) (2) K3 non alow the aux block in right side Side mounting uxiliary instantaneous contact block Number of contacts 3 4 ontacts at no Ref no Pack LL LL LLK () combinations of more than 2 blocks RLL RLL RLL () or high shock/vibrations environments or reference numbers, see chapter X, pg X9 64

Transient voltage suppressor ccessories or use Mounting Voltage Ue with: at no Ref no Pack ixation to the coil terminals, that allows simultaneous use with the auxiliary contact blocks K75 K08 24V

interlock K07 K2 orizontal K 04763 K07 K95 Vertical KVS 04786 K0 K2 Vertical KV 04785 K3 Vertical KV 04764 Order codes Pole terminal protection K75 K08 pole V006 M5 05200 K85 K2 pole V006 ontactors

4 Transient voltage suppressor ccessories or use Mounting Voltage Ue with: at no Ref no Pack ixation to the coil terminals, that allows simultaneous use with the auxiliary contact blocks K75 K08 24V 48V SLR K75 K08 50V 27V SLR3K K75 K08 30V 240V SLR3R K75 K08 227V 500V SLV3U K85 K3 24V KR K85 K3 260V KR48/ K85 K3 45V KR380/ Mechanical interlock K07 K2 orizontal K K07 K95 Vertical KVS K0 K2 Vertical KV K3 Vertical KV Order codes Pole terminal protection K75 K08 pole V006 M K85 K2 pole V006 ontactors 3P K08 K2 pole V006 ontactors 4P K75 K08 pole PXX PTPK () K85 K95 pole PXX PTPK (2) K0 K2 pole PXX PTPK () () One phase (2) Three pole ontact kits Spares or use with: Type at no Ref no Pack One set consists of two fixed contacts, one moving contact and accessory parts When contact replacement is needed, it is recommended to replace all the contacts at the same time K07 N V K75 N V K08 N V K08 N ontactors 4P V K85 N V K09 N V K09 N ontactors 4P V K95 N V K0 N V0 368 K N V 369 K2 N V K3 N V

irectonline starters 50 to 825 (3) Motorstarters onnection sets Power circuit: up to 000V ontrol circuit: up to 690V Protection degree P00 Terminals protected against accidental contact: P20 K75 to

set for power circuit K85,K09,K95 KVP85 04770 K0,K KVP0 0477 K2 KVP2 04767 Plate Metallic plate K85, K09, K95 PVP85 24747 K0, K PVP0 24748 K2 PP2 24749 Reversing starters 50 to 825 (3) Power circuit:

5 irectonline starters 50 to 825 (3) Motorstarters onnection sets Power circuit: up to 000V ontrol circuit: up to 690V Protection degree P00 Terminals protected against accidental contact: P20 K75 to K2: oil and auxiliary terminals with builtin protection Main terminals protector on request K3: oil and auxiliary terminals with builtin protection irectonline starters P00 at no Ref no Pack usbar set for power circuit K85,K09,K95 KVP K0,K KVP K2 KVP Plate Metallic plate K85, K09, K95 PVP K0, K PVP K2 PP Reversing starters 50 to 825 (3) Power circuit: up to 000V ontrol circuit: up to 690V Protection degree P00 Reversing starters P00 onnection sets escription usbar set for power circuit usbar set for power circuit or assembly with thermal overload relay or use with contactor K75, K08 K85, K09, K95 K0, K K2 K75, K08 K85, K09, K95 K0, K K2 at no KVP75U KVP85U KVP0U KVP2U KVP75 KVP85 KVP0 KVP2 Ref no Pack Plate Metallic plate K75, K08 K85, K95 K0, K K2 KV75 KV95 KV0 KV Order codes! page 6667 Wiring diagrams! page 35 imensions! page 38 66

Stardelta starters Power circuit: up to 000V ontrol circuit: up to 690V Protection degree P00 Protection against accidental contacts: P20 K75: uiltin protection K08 K2: oil and auxiliary terminals

6 Stardelta starters Power circuit: up to 000V ontrol circuit: up to 690V Protection degree P00 Protection against accidental contacts: P20 K75: uiltin protection K08 K2: oil and auxiliary terminals with builtin protection Main terminals protector on request K3: oil and auxiliary terminals with builtin protection usbar sets for power circuit Stardelta starters P00 Linedelta Star at no Ref no Pack contactor contactor K75, K08 K75, K08 KVP K85, K09, K95 K75, K08 KVP K95 K85, K09, K95 KVP K0, K K85, K09, K95 KVP K0, K K0, K KVP K2 K0, K KVP Order codes Plate Metallic plate K75, K08 KV K85, K95 KV K0, K KV K2 KV

7 ontactors onformity to standards /N N 630 S 5424 & 775 /N S 025 NM S NL 49 S 222/4 V 0660/02 UL 508 UN 2009 N pprovals culus RN NOM Lloyd s Register ureau Veritas mbient conditions Storage temperature 55º to +80º Operation temperature 40º to +60º ltitude up to 3000m Nominal values from 3000 up to 4000m 90%e 80%Ue from 4000 up to 5000m 80%e 75%Ue limatic resistance ( 682) ontinuous tests 40 / 25 / 56 old (72h) Temperature 40º ry heat (96h) Temperature +25º Relative humidity < 50% umid heat (56 days) Temperature +40º Relative humidity 95% yclical test irst halfcycle (2h) Low temperature +25º Relative humidity 93% Second halfcycle (2h) Low temperature +55º Relative humidity 95% Number of consecutive cycles 6 Mounting positions With the same pickup and dropout voltage With the same rated power Terminal capacity and tightening torque Solid (mm 2 ) inely stranded w/end sleeve (mm 2 ) inely stranded w/o end sleeve (mm 2 ) Stranded (mm 2 ) W wires (mm 2 ) Tightening torque (Nm) (Lb x in) inely stranded w/end sleeve (mm 2 ) W wires with end sleeve (mm 2 ) usbars Tightening torque (Nm) (Lb x in) K07 K75 K08 K0 K K2 K3 K08 K x 20 x x 85 2 x 95 2 x 50 x 300 x x x 07 2 x (25 x 5) 2 (25 x 5) 2 (35 x 0) x x (35 x 0) 2 (35 x 0) 2 (60 x 0)

8 Power circuit Three pole contactors Rated thermal current th at θ 40º () Rated operational current e 3 () Rated operational voltage Ue (V) Rated insulation voltage Ui (V) Maximum continuous current () requency limits (z) Making capacity (RMS) ( 947) () reaking capacity (RMS) ( 947) Ue 400V () Ue = 500V () Ue = 690V () Ue = 000V () Shorttime current sec () 5 sec () 0 sec () 30 sec () min () 3 min () Shorttime current (min) Protec against shortcircuit with fuses without TOR oord type gl/g () oord type "2" gl/g () Without welding gl/g () mpedance per pole (mω) Power dissipation (W) per pole 3 (W) nsulation resistance etween adjacent poles (mω) etween poles and earth (mω) etween input and output (mω) our pole contactors Rated thermal current th at θ 40º () Rated operational voltage Ue (V) Rated insulation voltage Ui (V) Maximum continuous current () requency limits (z) Making capacity (RMS) ( 947) () reaking capacity (RMS) ( 947) Ue 400V () Ue = 500V () Ue = 690V () Ue = 000V () Shorttime current sec () 5 sec () 0 sec () 30 sec () min () 3 min () Recovery time min Shortcircuit protection with fuse without TOR oord type "" gl/g () oord type 2 gl/g () Without welding gl/g () mpedance per pole (mω) Power dissipation per pole (W) nsulation resistance etween adjacent poles (mω) etween poles and earth (mω) etween input and output (mω) K75 K08 K85 K09 K95 K0 K K2 K x > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 K07 K08 K09 K95 K0 K K2 K x > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 > 0 Technical data 03

9 lectrical endurance Mixed category 4 / 3 lectrical endurance for mixed category (3/4) is calculated with the following formula: lectrical endurance (3/4) = lectrical endurance (3) % oper 4 lecendur (3) + X 00 lecendur(4) ( ) ategory ontactors Number of operations c=e for all voltages ategory 2 Number of operations Rated motor power (c = 25 e) 04

10 lectrical endurance (continued) ategory 3 Number of operations Technical data Rated motor power (c = e) ategory 4 Number of operations Rated motor power (c = 6 e) 05

11 Three pole contactors ontrol circuit lternating current ontactors K75 K08 K85 K85 K09 K95 K0 K K2 K2 K3 Rated insulation voltage Ui (V) Standard voltages Us (50/60 z) (V) Operating limits Switchon xus 08 08, , Switchoff xus onsumption Monofrequency coils Magnetic circuit K (V) closed K (V) Magnetic circuit K (V) open K (V) Power K (W) dissipation K (W) onsumption ifrequency coils Magnetic circuit 50z (V) closed (K) 60z (V Magnetic circuit 50z (V) open (K) 60z (V) Power 50z (W) dissipation (K) 60z (W Power factor Magnetic circuit K (cos ϕ) approx closed K (cos ϕ) Magnetic circuit K (cos ϕ) approx open K (cos ϕ) Opening and closing times at Us Making time (ms) at excitation (NO) reaking time (ms) at deenergisation (NO) Mechanical endurance () 0 6 ops Maximum rate No load ops/h /3 at rated power ops/h at rated power ops/h at rated power ops/h () Mechanical endurance for emodule is Million operations irect current K75 K08 K85 K09 K95 K0 K K2 K2 Rated insulation voltage Ui (V) Standard voltages Us (50/60 z) (V) Operating limits Switchon xus , Switchoff xus onsumption Magnetic circuit closed (W) Magnetic circuit open (W) Opening and closing times at Us Making time (ms) at excitation (NO contacts) reaking time (ms) at deenergisation (NO contacts) Mechanical endurance 0 6 ops Maximum rate No load ops/h at rated power ops/h at rated power ops/h () Mechanical endurance for emodule is Million operations 06

12 our pole contactors ontrol circuit lternating current K07 K07 K08 K08 K09 K95 K0 K K2 K2 K3 Rated insulation voltage Ui (V) Standard voltages Us (50/60 z) (V) Operating limits Switchon xus Switchoff xus onsumption Monofrequency coils Magnetic circuit K (V) closed K (V) Magnetic circuit K (V) open K (V) Power K (W) dissipation K (W) onsumption ifrequency coils Magnetic circuit 50z (V) closed (K) 60z (V) Magnetic circuit 50z (V) open (K) 60z (V) Power 50z (W) dissipation (K) 60z (W) Power factor Magnetic circuit K (cos ϕ) approx closed K (cos ϕ) Magnetic circuit K (cos ϕ) approx open K (cos ϕ) Opening and closing times at Us Making time (ms) at excitation (NO) reaking time (ms) at deenergisation (NO) Mechanical endurance 0 6 ops Maximum rate No load ops/h /3 at rated power ops/h () Mechanical endurance for emodule is Million operations Technical data irect current lectronic module K07 K08 K08 K95 K0 K K2 K2 Rated insulation voltage Ui (V) Standard voltages Us (V) Operating limits Switchon xus Switchoff xus onsumption Magnetic circuit closed (W) Magnetic circuit open (W) Opening and closing times at Us Making time (ms) at excitation (NO contacts) reaking time (ms) at deenergisation (NO contacts) Mechanical endurance 0 6 ops Maximum rate No load ops/h at rated power ops/h () Mechanical endurance for emodule is Million operations 07

13 ontact sequence asic contactor uxiliary contact blocks Lateral mounted LL 20 RLL 20 LL RLL Threepole contactors 3 NO K75 K08 K85 K09 K95 K0 K , , ontactors K2 K3 K K08 K09 K95 K0 K K2 K Numbering of the terminals Three pole contactors K75 3_ K3 3_ our pole contactors K07 4_ K3 4_ uxiliary contact blocks Lateral mounting Voltage suppressor block LL20 LL K/R RLL20 RLL Mechanical interlock KV, KV, KVS, KV 08

14 imensional drawings Three pole contactors K75 K kg 3500 kg ontactors K85 K09 K kg 6200 kg 6300 kg K0 K 00 kg 00 kg K2 800 kg K kg 8

15 our pole contactors Mechanical interlock K kg K 0350 kg K753 K K853 K K03 K3 33 K23 75 K08 K09 K kg 50 kg 530 kg imensions K0 K 2230 kg 2280 kg KV 550 KVS kg 0800 kg K kg KV 200 kg K kg 9

16 irectonline starter Power circuit ontrol circuit ontrol by two or more pushbuttons Use of two phases (single phase) Three phase K75 K2 ontrol by permanent contact (float, thermostat, pressure switch, ) Wiring diagrams K3 33

17 Reversing starter without thermal overload relay Power circuit ontrol circuit K75 K2 K3 ontrol by two or more pushbuttons Wiring diagrams irectonline starters with thermal overload relay Power circuit ontrol circuit K75 K2 K3 ontrol by two or more pushbuttons 35

18 Series L, K Wiring diagrams Series L and K Stardelta starters Power circuit ontrol circuit Motorstarters 36

19 imensional drawings irectonline starters K75 K08 K85 K95 Motorstarters K0 K K2 38

20 imensional drawings irectonline reversing starters without thermal overload relay K75 K08 Motorstarters K85 K95 irectonline reversing starters with thermal overload relay K75 K08 K85 K95 40

21 irectonline reversing starters without thermal overload relay K0 K K2 imensions irectonline reversing starters with thermal overload relay K0 K K2 4

22 Series L, K imensional drawings Series L Stardelta starters L00 L L03 L Motorstarters L06 L L L Stardelta starters K75 K08 K85 K95 42

23 Series L, K Stardelta starters K0 K imensions K2 43

Standard voltages. Alternating current (V) /60Hz Alternating current (V)

Standard voltages. Alternating current (V) /60Hz Alternating current (V) Series K Three and four pole contactors 150 to 825 (3) 200 to 1250 (1) ontactors ontrol circuit: lternating current up to 690V irect current up to 500V egree of protection P00 (Pxx with accessories) K07K13: