Efficor* Intro. Conformity to standards. Ambient conditions. Climatic resistance (IEC 68-2) Approvals/Marking. Mounting positions

Size: px

Start display at page:

Download "Efficor* Intro. Conformity to standards. Ambient conditions. Climatic resistance (IEC 68-2) Approvals/Marking. Mounting positions"

Derek Armstrong
5 years ago
Views:

1 fficor* onformity to standards /N /N UL508 /N UL486 /N S22- N500 N /102 N50012 N50005 pprovals/marking mbient conditions Storage temperature -55º to +80º Operation temperature -40º to +55º Without TOR -40º to +60º -40º to +70º (1) ltitude <2000m (1) rom 100% to 0% of rated control voltage, no auxiliary blocks limatic resistance ( 68-2) ontinuous tests 40 / 125 / 56 old (72h) Temperature -40º lobal contactors Mounting positions nstallation capabilities ry heat (96h) Temperature +125º Relative humidity < 50% umid heat (56h) Temperature +40º Relative humidity 95% yclic test (6 cycles) umid heat irst half-cycle Low temperature +25º Relative humidity 93% Second half-cycle Low temperature +55º Relative humidity 95% With derating values % connection voltage +10% disconnection voltage with same rated power, data compared to vertical mounting Terminal capacity and tightening torque onventional thermal current (th) contactors contactors ead type ox terminals Solid, stranded and finely stranded without ferrule (mm 2 ) Slot & PZ inely stranded with ferrule (mm 2 ) Slot & PZ inely stranded without ferrule (mm 2 ) Slot & PZ W /0 Tightening torque (Nm) (Lb x in) Solid (mm 2 ) Stranded (mm 2 ) inely stranded without ferrule (mm 2 ) Slot & PZ inely stranded with ferrule (mm 2 ) /0 W /0 Tightening torque (Nm) (Lb x in) Solid, stranded and finely stranded without ferrule (mm 2 ) Max 1x16 + 1x10 Max 1x25 + 1x25 inely stranded without ferrule (mm 2 ) Max 1x16 + 1x10 - inely stranded with ferrule (mm 2 ) Slot & PZ Max 1x16 + 1x10 - W Max 1x5 + 1x7 Max 1x3 + 1x3 Tightening torque (Nm) (Lb x in)

2 fficor* lectrical endurance ategory 3 (3P contactors) ategory 4 (3P contactors) Operations ,000,000 8,000,000 6,000,000 4,000,000 2,000,000 1,000, , , , , , urrent () Operations 10,000,000 8,000,000 6,000,000 4,000,000 2,000,000 1,000, , , , , , urrent () Technical data 69

3 fficor* lobal contactors Power circuit for contactors Three pole version Rated thermal current th at 55º () Rated operational current e -3 () Rated operational voltage Ue (V) 690V acc / 600V acc UL-S our pole version Rated thermal current th at 55º () Rated operational voltage Ue (V) 690V acc / 600V acc UL-S Three and four pole version Rated insulation voltage Ui (V) 1000V acc / 600V acc UL-S Maximum continuous current -1 () requency limits (z) Making capacity (RMS) ( ) U = 500V () reaking capacity (RMS) (acc ) Ue = 500V () Ue = 690V () Short-time current from cold state 1s () s () s () s () min () min () Recovery time (min) Protection against short-circuit with fuses without thermal overload relay (TOR) oordination type 1 gl-g (U = 500V, 50k or U = 5V, 80k) () oordination type 2 gl-g (U = 500V, 50k or U = 5V, 80k) () verage mpedance per pole (mω) Power dissipation per pole -1 (W) (W) nsulation resistance etween adjacent poles (MΩ) >10 >10 >10 >10 >10 >10 etween poles and earth (MΩ) >10 >10 >10 >10 >10 >10 etween input and output (MΩ) >10 >10 >10 >10 >10 >10 70

4 fficor* Power circuit for contactors Three pole version Rated thermal current th at 55º () Rated operational current e -3 () Rated operational voltage Ue (V) 690V acc / 600V acc UL-S our pole version Rated thermal current th at 55º () Rated operational voltage Ue (V) V acc / 600V acc UL-S - Three and four pole version Rated insulation voltage Ui (V) 1000V acc / 600V acc UL-S Maximum continuous current -1 () requency limits (z) Making capacity (RMS) ( ) () reaking capacity (RMS) (acc ) Ue = 400V () Ue = 500V () Ue = 690V () Short-time current from cold state 1s () s () s () s () min () min () Recovery time (min) Protection against short-circuit with fuses without thermal overload relay (TOR) oordination type 1 gl-g () oordination type 2 gl-g () Without welding gl-g () verage impedance per pole (mω) Power dissipation per pole -1 (W) (W) nsulation resistance etween adjacent poles (MΩ) >10 >10 >10 >10 >10 >10 etween poles and earth (MΩ) >10 >10 >10 >10 >10 >10 etween input and output (MΩ) >10 >10 >10 >10 >10 >10 Technical data 71

5 fficor* lobal contactors ontrol circuit - lternating current for contactors 09 up to 18 and 25 up to 40 Rated insulation voltage Ui (V) Standard voltages Us 50z (V) Standard voltages Us 60z (V) Voltage operating limits 50-60z coils Operating 50z xus Operating 60z xus Pick-up 50z xus Pick-up 60z xus rop-out 50z xus rop-out 60z xus oil onsumption at Us (cold state) Magnetic circuit closed (50z/60z) (V) 9 / 6 1 / 85 Magnetic circuit opened (50z/60z) (V) 701 / 6 4 / 8 Power factor Magnetic circuit closed cos Magnetic circuit opened cos Opening and closing times Values between +10% Us and 20% Us Making time on energisation () (ms) reaking time on de-energisation () (ms) Values at Us Making time on energisation () (ms) reaking time on de-energisation () (ms) Mechanical endurance ifrequency coils (at 50z) 10 6 ops Maximum rate -1 at rated power ops/h at rated power ops/h at rated power ops/h at rated power ops/h No load ops/h irect current for contactors oils with wide voltage range oils with low consumption 09 up to up to up to up to 40 and Rated insulation voltage Ui (V) Standard voltages Us (V) Operating Limits Operating xus (V ) Pick-up xus (V ) rop-out xus (V ) oil onsumption at Us (cold state) Magnetic circuit open and closed (W) Opening and closing times Values between +10% Us and 20% Us Making time on energisation () (ms) reaking time on de-energisation () (ms) Values at Us Making time on energisation () (ms) reaking time on de-energisation () (ms) Mechanical endurance 10 6 ops Maximum rate -1 at rated power ops/h at rated power ops/h at rated power ops/h at rated power ops/h No load ops/h

6 fficor* ontrol circuit - lternating current for contactors 50 up to up to 105 Rated insulation voltage Ui (V) Standard voltages Us 50-60z (V) Voltage operating limits 50-60z coils Operating 50z xus Operating 60z xus Pick-up 50z xus (at an ambient temperature of 25º) Pick-up 60z xus (at an ambient temperature of 25º) ,8 rop-out 50z xus (at an ambient temperature of 25º) rop-out 60z xus (at an ambient temperature of 25º) oil consumption at Us (cold state) Magnetic circuit closed (50z/60z) (V) 25 / / 16 Magnetic circuit opened (50z/60z) (V) 5 / / 204 Thermal power dissipation (50z/60z) (W) 52 / 52 / Power factor (50z) Magnetic circuit closed cos Magnetic circuit opened cos Opening and closing times Values between +10% Us and 20% Us Making time on energisation () (ms) reaking time on de-energisation () (ms) Values at Us Making time on energisation () (ms) reaking time on de-energisation () (ms) Mechanical endurance ifrequency coils (at 50z) 10 6 ops 5 5 Maximum rate -1 at rated power ops/h at rated power ops/h at rated power ops/h at rated power ops/h No load ops/h Technical data lternating current / irect current for contactors oils with wide voltage range 50 up to up to 105 Rated insulation voltage Ui (V) Standard voltages Us (V) Operating Limits Operating xus (V ) Pick-up xus (V ) rop-out xus (V ) oil consumption at Us (cold state) Magnetic circuit closed (V) Magnetic circuit open (V) 1 1 Magnetic circuit closed (V) Magnetic circuit open (V) Opening and closing times Values at Us Making time on energisation () (ms) reaking time on de-energisation () (ms) Mechanical endurance 10 6 ops 5 5 Maximum rate -1 at rated power ops/h at rated power ops/h at rated power ops/h at rated power ops/h No load ops/h

7 fficor* lobal contactors uilt-in auxiliary contacts 09 up to 25 and Rated insulation voltage Ui according to (V) 1000 Rated thermal current th a 55º () 10 Making capacity (RMS) acc to Ue 400V, 50-60z () Ue 220V () 105 reaking capacity (RMS) acc to Ue 400V, 50-60z () Ue 220V () 2-15 rated voltage and current Ue-e (V-) 0/ according to 220/ / / /660-2 according to UL, S rated voltage and current Ue-le (V-) -6 according to according to UL, S Q600 lectrical endurance 10 6 ops 02 Minimum operational power (operational safety) 17 V - 5m Short-circuit protection max fuse class gl-g without welding () 10 nsulation resistance etween contacts (MΩ) etween contacts and earth (MΩ) >10 uaranteed no overlap between and contacts Space mm mpedance of the contacts (MΩ) 27 uxiliary contact blocks /L/LL Rated insulation voltage Ui according to (V) 1000 Rated thermal current lth at 55º () 10 Making capacity (eff) according to Ue 400V, 50-60z () 60 - Ue 220V () 60 reaking capacity (eff) according to Ue 400V, 50-60z () 60 - Ue 220V () rated voltage and current Ue-e (V-) 0/120-6 according to 220/ / / / according to UL, S rated voltage and current Ue-e (V-) -4 according to according to UL, S Q600 lectrical endurance 10 6 ops 02 Mechanical endurance 10 6 ops 10 Minimum operational current (operational safety) 17-5 V-m Short-circuit protection max fuse class gl-g without welding () 10 nsulation resistance etween contacts (MΩ) etween contacts and earth (MΩ) >10 uaranteed no overlap between and contacts Space 16mm for / 22mm for L/ mm for LL mpedance of the contacts (mili) 27

8 fficor* Mechanical latch blocks Rated insulation voltage Ui (V) 1000 Standard voltages Us: 50 to 60z and (V) -660 & -0 Operating limits 85% to 0% onsumption for unlatching (auto cut-out) / to 72V 30W / 25V 0 to 0V 15W / 12V lectrical unlatching control 18 Minimum impulse (ms) 25 Maintained uto cut by internal contact Manual unlatching control y manual push-button lectrical making control Minimum pulse (ms) 40 (auto cut) Manual making control y manual push-button uxiliary contact -15 utilisation (V-) 0/120-6 according to 220/ / / / according to UL/S utilisation according to (V-) according to UL/S Q600 Mechanical endurance 10 6 ops 02 Wiring diagrams lternating current Technical data lternating current / irect current Terminal capacity Terminal capacity Screw plate MLS, MLS lexible wire (mm 2 ) 2x05 25 W wire 2x20 Standard gauge 3 Tightening torque (Nm/Lb in) / 10 75

9 fficor* Terminal numbering 3P and 4P contactors L1 3L2 5L3 7L4 R1 1L 3L R3 1L1 R1 R3 3L2 22 2T1 4T2 6T3 8T4 R2 2T1 4T R4 2T1 R2 R4 4T2 lobal contactors uxiliary contactors uxiliary contact blocks - ront mounting uxiliary contact blocks - Lateral mounting L0 L1 L02 LL20 LL 73 (94) (102) 32 (103) (93) (103) (91) Mechanical and mechanical/electrical interlock 72 (101) (91) 22 M - L M02 - L02 01 (02) (02) (01) 02 (01) 76

10 fficor* Terminal numbering (continued) Pneumatic timer blocks PT PT Voltage suppressor blocks SUR SU SUV SLR3 SLV3 Mechanical latch block ML ML c alterna / Technical data 77

11 fficor* Terminal numbering according to N 500 uxiliary contacts escription Possible basic auxiliary contactors + uxiliary contacts blocks to be added lobal contactors 4 auxiliary contactor terminal combination with 2P RONTL block auxiliary contactor terminal combination with 4P RONTL block L4 4 auxiliary contactor terminal combination with LTRL block mounted on the RT side of the contactor 71 (102) 72 (101) (91) 73 (103) (91) 73 (94) (103) (93) L L 0 0 +L20 78

12 fficor* Terminal numbering according to N 500 (continued 1) uxiliary contacts escription Possible basic auxiliary contactors + uxiliary contacts blocks to be added 4 auxiliary contactor terminal combination with LTRL block mounted on the LT side of the contactor auxiliary contactor terminal combination with 2P RONTL block auxiliary contactor terminal combination with 4P RONTL block L L 0 0 +L L4 Technical data 79

13 fficor* Terminal numbering according to N 500 (continued 2) uxiliary contacts escription Possible basic auxiliary contactors + uxiliary contacts blocks to be added lobal contactors 4 auxiliary contactor terminal combination with LTRL block mounted on the RT side of the contactor 71 (102) 72 (101) (91) 73 (103) (91) 73 (103) (91) L L L20 4 auxiliary contactor terminal combination with LTRL block mounted on the LT side of the contactor L L L20 80

14 fficor* Terminal numbering according to N uxiliary contacts escription Possible basic auxiliary contactors + uxiliary contacts blocks to be added Terminal numbering according to N RONT mounted auxiliary contact blocks with 2 contacts each Technical data LTRL mounted auxiliary contact blocks with 2 contacts each - RT side mounted 71 (102) (101) (91) (103) (91) L L

15 fficor* Terminal numbering according to N (continued 1) uxiliary contacts escription Possible basic auxiliary contactors + uxiliary contacts blocks to be added lobal contactors LTRL mounted auxiliary contact blocks with 2 contacts each - RT side mounted (continued) 73 (94) 22 (103) (93) 71 (102) 72 (101) (91) 73 (103) (91) 73 (94) (103) (93) L L L LL L LL20 LTRL mounted auxiliary contact blocks with 2 contacts each - LT side mounted L L L L L LL L LL20

16 fficor* Terminal numbering according to N (continued 2) uxiliary contacts escription Possible basic auxiliary contactors + uxiliary contacts blocks to be added RONT mounted auxiliary contact blocks with 4 contacts each Technical data

Efficor. Most reliable technology. High installation benefits. Best in class. Standards. Approvals. Global contactors. Intro. J/X New A.

Efficor. Most reliable technology. High installation benefits. Best in class. Standards. Approvals. Global contactors. Intro. J/X New A. Most reliable technology igh installation benefits lobal contactors Standard materials for food & beverage and transportation purposes complying the latest rail standards ighest reliable product performance