C -5 to +55 (0.8 to 1.1Uc) Permissible o

Transcription

1 T - Line Contactors 3 & 4 Pole Contactors with C operating coils General Characteristics Type Unit TC1-D09 ~ TC1-D95 Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 VDEO 110grC/IEC V 1000 Conforming to standards NFC63-110, VDE0660, BS5424, EM1038 & IEC pprovals UL, CS Degree of Protection Conforming to VDE 0106 Protection against direct finger contacts Protective treatment Standard version TH mbient air temperature Storage o C -60 to +80 (around the device) Operation o C -5 to +55 (0.8 to 1.1Uc) Permissible o C -40 to +70, for operation at Uc Maximum operating altitude Without derating Mtr Operating Position Without derating +30 o possible, in relation to normal vertical mounting plane Pole Characteristics Type TC1- Unit D09 D12 D18 D22 D25 D32 D38 D40 D50 D65 D80 D95 Number of poles Power + uxiliary or or - - or - - or - or or or Rated current (Ie) In C-3 θ < 55 o C Rated operating Voltage up to V Frequency limits Of the operational current Hz Rated thermal current (Ith) θ < 40 o C Rated making capacity Irms conforming to IEC Rated breaking capacity Irms conforming to V IEC V V verage impedence per pole t Ith and 50Hz Milli Ω Power dissipation per pole for C-3 W the above operational currents Control Circuit Characteristics Type Unit TC1- D09~D22 TC1- D25~D38 TC1- D40~D65 TC1- D80~D95 Rated control circuit voltage (Uc) 50 or 60 Hz V 12 to 660 Control voltage Operational Uc limits (θ < 55 o C) 50 or 60Hz Coil Drop out Uc 50/60Hz Coil Operational Uc at 60Hz verage consumption at 20 o C and at Uc C 50 Hz C 60 Hz Inrush Sealed Inrush Sealed 50 Hz Coil V /60 Hz Coil V COS φ Hz Coil V /60 Hz Coil V COS φ Hz Coil V /60 Hz Coil V COS φ Hz Coil V /60 Hz Coil V COS φ verage operating time at Uc Closing time C msec Opening time O msec Mechanical life Uc 50 or 60 Hz Coil 20(16 for TC1D18) (mechanical durability) in 50/60 Hz Coil or 50 Hz millions of operating cycles Maximum operating rate In operating cycle/hour Integral uxiliary Contact Characteristics Type Unit TC1- D09 ~ TC1- D95 Rated thermal current (Ith) θ < 55 o C 10 Rated operational voltage (Ue) up to V 660 1

2 T - Line Contactors 3 & 4 Pole Contactors with DC operating coils General Characteristics Type Unit TP1-D09 ~ TP1-D80 Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 VDEO 110grC/IEC V 1000 Conforming to standards NFC63-110, VDE0660, BS5424, EM1038 & IEC pprovals CS, IEC Degree of Protection Conforming to VDE 0106 Protection against direct finger contacts Protective treatment Standard version TH mbient air temperature Storage o C -60 to +80 (around the device) Operation o C -5 to +55 (0.8 to 1.1Uc) Permissible o C -40 to +70, for operation at Uc Maximum operating altitude Without derating Mtr Operating Position Without derating +30 o possible, in relation to normal vertical mounting plane Pole Characteristics Type TP1- Unit D09 D12 D18 D22 D25 D32 D38 D40 D50 D65 D80 Number of poles Power + uxiliary or or - - or - - or - or or Rated current (Ie) In C-3 θ < 55 o C Rated operating Voltage (Ue) up to V Frequency limits Of the operational current Hz Rated thermal current (Ith) θ < 40 o C Rated making capacity Irms conforming to IEC Rated breaking capacity Irms conforming to V IEC V V verage impedence per pole t Ith and 50Hz Milli Ω Power dissipation per pole for C-3 W the above operational currents Control Circuit Characteristics Type Unit TP1-D09~D22 TP1-D25~D38 TP1-D4011~D65 TP1-D80 Rated control circuit voltage (Uc) DC V 12 to to 660 Control voltage Operational Standard Coil Uc Uc limits (θ < 55 o C) Wide Range Coil Uc Uc verage consumption DC at 20 o C and at Uc Drop out Uc Uc DC Inrush W Sealed W verage operating time at Uc Closing time C msec Opening time O msec Mechanical life Uc In millions of operating cycles (mechanical durability) Maximum operating rate In operating cycle/hour (at ambient temp. of θ < 55 o C) Integral uxiliary Contact Characteristics Type Unit TP1- D09 ~ TP1- D80 Rated thermal current (Ith) θ < 40 o C 10 Rated operational voltage (Ue) up to V 660 2

3 T - Line Contactors 3 & 4 Pole Contactors with C operating coil (For North merican market) 3 Pole Contactor with C operating coil TC1-D32 -XX TC1-D09008 TC2-D09 -XX Maximum Current Inductive Resistive C-3 C-1 Single Phase 120V 230V Maximum HP 200V Three Phase 230V TC1-D0910-XX 0 1 TC1-D0901-XX TC1-D1210-XX 0 1 TC1-D1201-XX TC1-D1810-XX 0 1 TC1-D1801-XX TC1-D2510-XX 0 1 TC1-D2501-XX TC1-D3210-XX 0 1 TC1-D3201-XX TC1-D4011-XX TC1-D5011-XX TC1-D6511-XX TC1-D8011-XX TC1-D9511-XX Note : Standard Fault Ratings High Fault Ratings (100k with Fuse of class /CC) 4 Pole Contactor with C operating coil Maximum Current Inductive Resistive C-3 3 Pole Mechanically Interlocked Contactor with C coil (Pre-wired) Inductive C-3 C-1 Maximum Current Resistive C-1 Single Phase 120V 230V Maximum HP 200V Maximum HP 3 Phase TC2-D0901-XX 1 0 TC2-D0911-XX TC2-D1201-XX 1 0 TC2-D1211-XX TC2-D1801-XX 1 0 TC2-D1811-XX TC2-D2501-XX 1 0 TC2-D2511-XX TC2-D3201-XX 1 0 TC2-D3211-XX TC2-D4011-XX TC2-D5011-XX TC2-D6511-XX TC2-D8011-XX TC2-D9511-XX Replace XX with voltage code from table - 1 Table-1 : XX-C Coil Voltages Volts C Hz L W T6 S6 X6 50/60 Hz B7 E7 F7 G7 - M7 P7 U7 - Q7 V7 N7 R V Three Phase 230V 600V ux. Contacts Built-in per contactor NO NC TC1-D09004-XX TC1-D09008-XX TC1-D12004-XX TC1-D12008-XX TC1-D25004-XX TC1-D25008-XX TC1-D40004-XX TC1-D40008-XX TC1-D50004-XX TC1-D50008-XX TC1-D65004-XX TC1-D65008-XX TC1-D80004-XX TC1-D80008-XX TC1-D95004-XX TC1-D95008-XX 480V 600V Main Pole Configuration NO ux. Contacts Built-in per contactor 200V 230V 480V 600V NO NC NC 3

4 T - Line Contactors 3 & 4 Pole Contactors with DC operating coil 3 Pole Contactor with DC operating coil TP1-D32 -XX Maximum Current Inductive Resistive C-3 C-1 Single Phase 120V 230V Maximum HP 200V Three Phase 230V TP1-D0910-XX 0 1 TP1-D0901-XX TP1-D1210-XX 0 1 TP1-D1201-XX TP1-D1810-XX 0 1 TP1-D1801-XX TP1-D2510-XX 0 1 TP1-D2501-XX TP1-D3210-XX 0 1 TP1-D3201-XX TP1-D4011-XX TP1-D5011-XX TP1-D6511-XX TP1-D8011-XX 480V 600V ux. Contacts Built-in per contactor NO NC Note : Standard Fault Ratings High Fault Ratings (100k with Fuse of class /CC) TP1-D0900 -XX 4 Pole Contactor with DC operating coil Maximum Current Inductive Resistive C-3 C-1 Single Phase 120V 230V Maximum HP 200V Three Phase 230V TP1-D09004-XX TP1-D09008-XX TP1-D12004-XX TP1-D12008-XX TP1-D25004-XX TP1-D25008-XX TP1-D40004-XX TP1-D40008-XX TP1-D50004-XX TP1-D50008-XX TP1-D65004-XX TP1-D65008-XX TP1-D80004-XX TP1-D80008-XX Note : Standard & High Fault Ratings 480V (100k with Fuse of class /CC) 600V Main Pole Configuration NO NC TP1-D12 -XX 3 Pole Mechanically Interlocked Contactor with DC coil (Pre-wired) Inductive C-3 Maximum Current Resistive C-1 Maximum HP 3 Phase Replace XX with voltage code from table - 2 ux. Contacts Built-in per contactor 200V 230V 480V 600V NO NC TP2-D0901-XX 1 0 TP2-D0911-XX TP2-D1201-XX 1 0 TP2-D1211-XX TP2-D1801-XX 1 0 TP2-D1811-XX TP2-D2501-XX 1 0 TP2-D2511-XX TP2-D3201-XX 1 0 TP2-D3211-XX TP2-D4011-XX TP2-D5011-XX TP2-D6511-XX TP2-D8011-XX 4 Table - 2: XX-DC Coil Voltages Volts DC D BD ED SD FD GD MD UD RD

5 T - Line Contactors ccessories, Spares Coils Power Connectors Wire Sets for T - Range Reversing Contactors T9-D1269 With Two Identical Contactors TC1-D09, TC1-D12, TP1-D09, TP1-D12 TC1-D18, TP1-D18 TC1-D25, TP1-D25 TC1-D32, TP1-D32 TP1-D40, TP1-D65, TC1-D40, TC1-D50, TC1-D65 TC1-D80, TP1-D80, TC1-D95 Mechanical Interlocks Horizontally Mounted T - Range Use for Contactor TC2-DN, TC3-DN TC1-D09 ~ D32, TP1-D09 ~ D32 TC1-D40 - D65, TP1-D40 - D65 TC1-D80 ~ D95, TP1-D80 Spare Coils (C) T - Range Use for contactor C TC1-D09~D18 TC1-D25~D32 TC1-D40~D95 Replace XX with voltage code from table - 3 T9-D1269 T9-D1869 T9-D2569 T9-D3269 T9-D6569 T9-D8069 *L9-D09978 L9-D50978 L9-D80978 TX1-D2-XX TX1-D4-XX TX1-D6-XX L9-D09978 approved Table-3: XX-C Coil Voltages Volts C Hz L6 W6 T6 S6 X6 50/60 Hz B7 E7 F7 G7 M7 U7 Q7 N7 R7 Spare Coils (DC) T - Range Use for contactor DC TP1-D09 ~ TP1-D18 TP1-D25 ~ TP1-D32 TP1-D40 ~ TP1-D65 TP1-D80 Replace XX with voltage code from table - 4 TX4-D2-XX TX4-D4-XX TX4-D40-XX TX4-D80-XX TX1-D -XX Table- 4: XX-DC Coil Voltages Volts DC D BD ED SD FD GD MD UD RD Mechanical Latching Blocks T - Range Description of Contactors For Contactors up to 32 mps Replace XX with voltage code from table - 5 / 6 L6DK01-XX For Mechanical Table-5: For C Voltage Latching Block L6-DK01 B E F G M U Q N R L6-DK01 approved For Mechanical Table-6: For DC Voltage Latching Block *L6-DK01 BD ED SD FD MD UD 5

6 T - Line Contactors Control Relays Characteristics Environment Type TC2DN TC3DN Conforming to Standards IEC 947-1, pprovals UL,CS Degree of Protection Protection against direct finger contact Conforming to VDE 0106 mbient air Temperature Storage C around the device Operation C Permissible for operation at Uc C Maximum operating altitude Without derating m 3000 Operating positions Without derating ±30 possible, in relation to normal vertical mounting plane Shock Resistance Control relay open 10g 8g 1/2 sine wave for 11 ms Control relay closed 15g 11g Vibration Resistance Control relay open 2g 2g 5 300Hz Control relay closed 4g 3g Cabling Flexible or solid cable with or without cable end mm 2 Min: 1x1; Max.: 2x2.5 Control Circuit Characteristics Type TC2DN TC3DN Rated Insulation Voltage (Ui) Conforming to IEC 947-1& IEC V 690 Conforming to CS C22-2 no. 14 V 600 Rated control circuit voltage (Uc) V Permissible voltage variation Operational With 50 or 60 Hz coil: With standard Hz coil: Uc Uc With 50/60Hz coil: With wide range coil: Uc Uc Voltage limits Drop-out Uc Uc verage consumption at 20 C ~ 50 Hz V Inrush: 60, Sealed:7 - ~ 60 Hz V Inrush: 70, Sealed:7.5 - ~ 50/60 Hz V Inrush: 70, Sealed:8 - With standard coil W - Inrush or Sealed: 9 With wide range coil W - Inrush or Sealed: 11 Operating Time Between coil energisation and ms (at rated control circuit voltage opening of the NC contacts and at 20 C) - closing of the NO contacts ms Between coil de-energisation and opening of the NO contacts ms closing of the NC contacts ms Short supply failures Max. duration without affecting ms 2 2 hold-in of device Maximum operating rate In operating cycles per second 3 3 Mechanical Life at Uc In millions of operating cycles 20 - With: 50 or 60 Hz coil (mechanical durability) 50/60 Hz coil (at 50 Hz) 30 - Standard coil - 30 Wide range coil - 30 Operating Power of Contactor with C Supply categories C-14 & C-15 Electrical life (up to 3600 operating cycles/hr) on an inductive load such as the coil of an electromagnet: making power (cosφ 0.7) - 10 times the power broken (cos φ 0.4) V / / / million operating cycles V million operating cycles V million operating cycles V Occasional making capacity V Breaking limit of contacts valid for maximum of 50 operating cycles at 10s intervals(breaking power=making power x cosφ 0.7) 2. Electrical life of Contacts: - for 1 million operating cycles (2a); - for 3 million operating cycles (2b); - for 10 million operating cycles (2C) 4. Thermal limit Operating Power of Contactor with DC Supply categories DC-13 Electrical life (up to 1200 operating cycles/hr) on an inductive load such as the coil of an electromagnet without economy resistor, the time constant increasing with the power. V million operating cycles V million operating cycles V million operating cycles V Occasional making capacity V Electrical life of Contacts: - for 1 million operating cycles (2a) - for 3 million operating cycles (2b) - for 10 million operating cycles (2C) 3. Breaking limit of contacts valid for maximum of 20 operating cycles at 10s intervals and with current passing for 0.5s per operating cycle. 4. Thermal limit

7 T - Line Contactors Control Relays Dimensions TC2-DN -XX TC3-DN -XX approved at 600V approved at 600V Control Relays (C) NO 2 2 TC2-DN22-XX 3 1 TC2-DN31-XX 4 0 TC2-DN40-XX Replace XX with voltage code from table - 7 Control Relays (DC) Replace XX with voltage code from table - 8 Table - 8: XX-DC Coil Voltages Volts DC D BD ED SD FD GD MD UD RD * For Independent Mounting Contacts NC Table-7 : XX-C Coil Voltages Volts C Hz L6 W6 T6 S6 X6 50/60 Hz B7 E7 F7 G7 M7 P7 U7 Q7 V7 N7 R7 Contacts NO NC 2 2 TC3-DN22-XX 3 1 TC3-DN31-XX 4 0 TC3-DN40-XX 7

8 F - Line Contactors Characteristics General Characteristics Type Unit LC1-FDP , LC1F-1154, LC1F-1504, LC1F-5004, LC1F-6304,L C1F-7804 Rated Insulation Voltage (Ui) (Conforming to IEC 158-1) V 1500 VDEO 110GRC/IEC V 1500 Conforming to Standards NFC63-110, VDEO660, BS5424, EM1038, IEC & IEC pprovals UL*, CS, IEC Protective treatment Standard Version TH mbient air temperature Storage o C -60 to +80 (around the device) Operation o C -5 to +55 (0.8 to 1.1 Uc) Permissible o C -50 to +70, for operation at Uc Maximum operating altitude Without derating Mtr Operating position Without derating +30 o possible, in relation to normal vertical mounting plane * - 4 Pole contactor under approval Pole Characteristics TYPE LC1-F UNIT Number of Poles (Power) 3 or 4 3 or or 4 3 or 4 3 or 4 Rated current (Ie) in C-3 θ< 55 C Rated operating voltage up to V Frequency limits of the operating current Hz Rated thermal current (Ith) θ< 40 C Rated making capacity Irms conforming to IEC Rated breaking capacity V Irms conforming to IEC V Control Circuit Characteristics 690V verage impedance per pole at Ith & 50 Hz MILLI Ω Power dissipation per pole for above operational current C-3 W Tightening Torque Power Circuit Nm Cabling Maximum CS No. of Bars Bar mm 20x3 25x3 25x3 32x4 32x4 30x5 30x5 40s5 60x5 100x5 Cable with Lug mm x150 2x Cable with connector Sqmm Bolt Diameter Sqmm xDia 14 TYPE (LC1-F) UNIT Rated control circuit voltage (Uc) 50 or 60 Hz V Control voltage limits Operational Uc Uc Uc Uc Temperature θ<55 o C Drop out Uc Uc Uc Uc verage consumption at 20 o C and at Uc, 50/60 Hz coil Operational verage consumption at 20 o C In rush 50 Hz coil V and at Uc, C 50 / 60hz In rush 60 Hz coil V In rush Hz coil V In rush Cosφ Sealed 50 Hz coil V Sealed 60 Hz coil V Sealed Hz coil V Sealed Cosφ verage operating time at Uc Closing time C msec Opening time O msec Mechanical life Uc (Mechanical 50 or 60 Hz coil Cycles durability) in millions of 50/60 Hz coil Cycles operating cycles Maximum operating rate In operating cycle/hour Tightening Torque Power Circuit Connection Nm Cabling Minimum / Maximum C.S. Flexible Cable without cable end 1or 2 Conductors Sqmm 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Flexible Cable with end 1 Conductor Sqmm 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Flexible Cable with end 2 Conductors Sqmm 1/2.5 1/2.5 1/2.5 1/2.5 1/2.5 1/2.5 1/2.5 1/2.5 1/2.5 1/2.5 Solid Cable without cable end 1 or 2 Conductors Sqmm 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 8

9 F - Line Contactors Contactors, Spare Coils - Contactors are without coil & uxiliary contacts, select the Coil & uxiliary contact separately 3 Pole Contactor with C or DC operating coil F - Range (coil sold separately) LC1-F185-XX Maximum Current Inductive C-3 Resistive C-1 Maximum HP Rating 200V 230V 480V 600V NO NC LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP Current rated 3 - LC1-FDP780 Note : V & V approved (only for Standard Fault Ratings) Main Pole Configuration LC1-F265-XX LX1-FF-XX 4 Pole Contactor with C or DC operating coil - F Range (coil sold separately) Inductive C-3 Maximum Current Resistive C-1 Maximum HP 3 Phase 200V 230V 480V 600V NO NC LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP LC1-FDP Current Rated 4 - LC1-FDP7804 Note: 4P F-Range Contactors Coils F - Range (Replace XX with coil voltage code listed below) For Contactors listing under process C Main Pole Configuration F115 - F150 LX1-FF-XXXV LX4-FF-XXXV F185 - F225 LX1-FG-XXXV LX4-FG-XXXV F265 - F330 LX1FH-XXXV-2 LX4-FH-XXXV F400 LX1-F-XXXV LX4-F-XXXV F500 LX1-FK-XXXV LX4-FK-XXXV F630 LX1-FL-XXXV LX4-FL-XXXV F780 LX1-FX-XXXV LX4-FX-XXXV Substitute XX with voltage rating from Table -9 for C Coil & from table 10 for DC Coil Table-9: XX*-C Coil Voltages Contactor Volts C F115, F150 F185, F Hz F265, F Hz F400,F500,F Hz F Hz * If 24V, 50Hz Coil is required then replace XX with 24,50Hz DC Table-10: XX*-DC Coil Voltages Volt D C F115, F150, F185 F225, F265, F330 F115, F150, F185 F400,F500 F630 F780 Note : Protected shrouds for main poles or power poles to be ordered separately. 9

10 F - Line Contactors ccessories, Spares Mechanical Interlocks Horizontally Mounted F - Range For Contactor Type LC1-F115 LC1-F150 LC1-F185 LC1-F225 LC1-F265 LC1-F330 LC1-F400 LC1-F500 LC1-F630 L9-FF970 L9-FG970 L9-F970 L9-FL970 L9-FF970 Mechanical Interlocks Vertically Mounted F - Range For Contactor Type LC1-F115 LC1-F150 LC1-F185 LC1-F225 LC1-F265 LC1-F330 LC1-F400 LC1-F500 LC1-F630 LC1-F780 Power Connectors Wire Sets for F- Range Reversing Contactors L9-FF4F L9-FG4G L9-FH4H L9-F4 L9-FK4K L9-FL4L L9-FX970* L9-FX970*** LC1-F115 LC1-F150 LC1-F185 LC1-F225 LC1-F265 LC1-F330 LC1-F400 LC1-F500 LC1-F630 Main Contact Sets** F - Range With two identical contactors L9-FF976 L9-F15076 L9-FG976 L9-F22576 L9-FH976 L9-F976 L9-F976 L9-FK976 L9-FL976 For Contactor Type LC1-F115 LC1-F150 LC1-F185 LC1-F225 LC1-F265 LC1-F330 LC1-F400 LC1-F500 LC1-F630 LC1-F780 L5-FF431 (F115) L5-FF431 (F150) L5-FG431 (F185) L5-FG431 (F225) L5-FH431 (F265) L5-F (F330) L5-F (F400) L5-F (F500) L5-F (F630) L5-F (F780)*** * Double mechanical interlock mechanism with 2 interlock, connecting roads and 3 power connecting links ** For 3-pole contact (per pole: 2 fixed contacts and moving contacts, 2 deflectors, 1 back plate, fixing screws and washers). *** Set of main contacts provided is 1 set of 2 blocks for one pole 10

11 T & F - Line Contactors uxiliary Contacts, Time Delay Blocks, Mechanical Latching Blocks Instantaneous Time Delay Contact Characteristics Type UNIT T1D T2D T3D T8D Number of contacts 2 or Rated operational Voltage (Ue) up to V 660 Rated Insulation Voltage (Ui) Conforming to IEC V 690 Conforming to CS C22-2 No. 14 V Rated Thermal current (Ith) For ambient temperature <40 C 10 Frequency of operational current Hz Minimum switching capacity U min V 17 I min m 5 Short time rating Permissible for 1s ms ms 140 Insulation resistance MΩ >10 Time Delay mbient air temperature for operation C (T2D & T3D contact blocks) Repeat accuracy - ± 5% ± 5% ccuracy only valid for setting range Drift up to 0.5 million operating cycles + 15% + 15% indicated on the front face Drift depending on ambient air temp % per C 0.25% per C - Mechanical Life In millions of operating cycles Standard, instantaneous auxiliary contact blocks T1-DN22 T8-DN T1-DN20 No. of Contacts Pneumatic Timer Block (Front Mounted) Description Contacts Snap-On Mounting NO NC 2 2 T1DN T1DN To the front of T1DN TC1D09 to D80 LC1F T1DN TP1D09 to D32 & T1DN TC2DN / TC3DN T1DN T1DN T1DN To the front of T1DN TC1D40 to D95 TP1D40 to D80 T1DN To the side of T8DN TC1D09 to D95 TP1D09 to D32 & T8DN20 TC2DN / TC3DN Contacts NO NC Range ON Delay s T2-DT0 ON Delay s T2-DT2 ON Delay s T2-DT4 OFF Delay s T3-DR0 OFF Delay s T3-DR2 OFF Delay s T3-DR4 On Delay s* T2-DS2 * With switching time of 40msec + 15 msec between the opening of NC contact to the closing of NO contact (for Star Delta application) T2-DT2 11

12 F - Line & Single Pole Contactors ccessories, Spares Protective Shroud Covers for F-Range Contactors L9-F701 For 3P Contactor Type Catalogue Number For 4P Contactor Type Catalogue Number LC1-F115 L9-F701 LC1-F115 4 L9-F706 LC1-F150 L9-F702 LC1-F150 4 L9-F707 LC1-F185 LC1-F185 4 L9-F707 LC1-F225 LC1-F225 4 L9-F708 LC1-F265 LC1-F330 L9-F703 LC1-F400 LC1-F500 LC1-F500 4 L9-F708 LC1-F630 L9-F704 LC1-F630 4 L9-F709 Set of Power Connections* - Reversing Contactors for Motor Control - On Request For Contactor Type LC1-F115 LC1-F150 LC1-F185 LC1-F225 LC1-F265 LC1-F330 LC1-F400 LC1-F500 LC1-F630 L9-F11576 L9-F15076 L9-F18576 L9-F22576 L9-F26576 L9-F33076 L9-F40076 L9-F50076 L9-F63076 L9-FF970 Set of Power Connections - 3 Pole Changeover Contactor Pairs - On Request With two identical contactors LC1-F115 L9-F11582 LC1-F150 L9-F15082 LC1-F185 L9-F18582 LC1-F225 L9-F22582 LC1-F265 L9-F26582 LC1-F330 L9-F33082 LC1-F400 L9-F40082 LC1-F500 L9-F50082 LC1-F630 L9-F Pole Mechanically Interlocked F-Range Contactors - On Request Maximum Current C3 LC1-F115 LC1-F150 LC1-F185 LC1-F225 LC1-F265 LC1-F330 LC1-F400 LC1-F500 LC1-F630 LC2-F115 LC2-F150 LC2-F185 LC2-F225 LC2-F265 LC2-F330 LC2-F400 LC2-F500 LC2-F630 1 * Reversers assembled using two contactors of identical rating type etc. 2 Replace ** with available coils BD for 24V DC, ED for 48V DC and EED for 54V DC 12

13 T & F - Line Contactors Overload Relays Characteristics Environment Conforming to standards IEC , IEC , NFC , VDE 0660, BS 4941 pprovals *, CS, IEC Degree of protection Conforming to VDE 0106 Protection against direct finger contact IP 2X Protective treatment Conforming to IEC 68 TH mbient air temperature Storage o C -60 to +70 (around the device) Operation, without derating o C -25 to +60 Max. & Min. operating temp. o C -40 to +70 Operating position Without derating ny Position, in relation to normal vertical mounting plane Shock resistance Permissible acceleration 15gn - 11ms, conforming to IEC Vibration resistance Permissible acceleration 6gn, conforming to IEC Dielectric strength at 50 Hz Conforming to IEC KV 6 Impulse withstand voltage Conforming to IEC KV 6 Electrical Characteristics of Power Circuit TYPE TR2-D UNIT Tripping class Rated insulation Voltage (Ui) Conforming to IEC V Rated operating voltage upto Conforming to UL, CS V Rated impulse withstand voltage (Uimp) KV Frequency limits Of the operational current Hz Setting range Depending on model Connecting to screw clamp terminal Minimum / Maximum CS Flexible cable without cable end 1 conductor mm / / 10 4 / 35 4 / 50 Flexible cable with cable end 1 conductor mm 2 1 / 4 1 / 6 4 / 35 4 / 50 except TR2 21:1/4 Solid cable without cable end 1 conductor mm 2 1 / / 4 4 / 35 4 / 50 except TR2 21:1/6 Tightening torque Nm Connection to spring terminals Minimum / Maximum CS Flexible cable without cable end 1 conductor mm / / Solid Cable without cable end 1 conductor mm / / Operating Characteristics TYPE TR2-D UNIT Temperature Compensation o C Tripping Threshold Conforming to IEC In Sensitivity to phase failure Conforming to IEC Tripping current 30% of In on one phase, the others at In uxiliary Contact Characteristics Conventional thermal Current 5 Maximum consumption of operating C Supply V coil of controlled contactors (Occasional V operating cycles of contact 95-96) V W Short circuit protection By gg or BS fuse Max. rating 5 or by GB2 circuit-breaker Connection to screw clamp terminal Minimum / Maximum CS Flexible cable without cable end 1 or 2 conductors mm 2 1 / 2.5 Flexible cable with cable end 1 or 2 conductors mm 2 1 / 2.5 Solid cable without cable end 1 or 2 conductors mm 2 1 / 2.5 Tightening torque 1 or 2 conductors Nm 1.85 Connecting to spring terminal Minimum / Maximum CS Flexible cable without cable end 1 or 2 conductors mm 2 1 / 2.5 Solid cable without cable end 1 or 2 conductors mm 2 1 /

14 T & F - Line Contactors TR2-D25322 Standard Fault Ratings High Fault Ratings LR1-FM105 Standard Fault Ratings with T-Range Relay Bimetallic Overload Relay (Class 10), Base Plate for Independent Mounting RELY RELY STNDRD POWER RTINGS OF 3-PHSE MOTORS 50/60Hz, C3 CTEGORY BCK UP BSE REFERENCE SETTING RNGE 220V 380V 415V 440V 660V FUSE RTINGPLTE* () KW KW KW KW KW am() g1 () REFERENCE TR2-D to TR2-D to TR2-D to TR2-D to TR2-D to TR2-D to TR2-D093X to TR2-D to TR2-D to TR2-D to TR2-D to TR2-D to TR2-D to TR2-D to T7D0964 TR2-D to TR2-D to TR2-D to T7D3264 TR2-D to TR2-D to TR2-D to TR2-D to TR2-D to TR2-D to Overload Relays F - Range, (Independent Mounting) Note : RELY RELY STNDRD POWER RTINGS OF 3-PHSE MOTORS 50/60Hz, C3 CTEGORY BCK UP REFERENCE SETTING RNGE 220V 380V 415V 440V 660V FUSE RTING () KW KW KW KW KW am () g1 () LR1-F to LR1-F to LR1-F to LR1-F to LR1-F to LR1-F to LR1-F to LR1-F to LR1-F to LR1-F to LR1-F to Protected shrouds for main poles or power poles to be ordered separately. 14

15 Definite Purpose Contactors Technical Specifications Consult factory for availability 1 Pole without Shunt Full Load mps. (Inductive) C 240V C 277V Locked Rotor (Per Pole) C 480V C 600V Resistive mps Rating Catalog Number TCDP251-XX TCDP301-XX TCDP401-XX 1 Pole with Shunt Full Load mps. (Inductive) C 240V C 277V Locked Rotor (Per Pole) C 480V C 600V Resistive mps Rating Catalog Number TCDP251S-XX TCDP301S-XX TCDP401S-XX 2 Pole Full Load mps. (Inductive) C 240V C 277V Locked Rotor (Per Pole) C 480V C 600V Resistive mps Rating Catalog Number TCDP202-XX TCDP302-XX TCDP402-XX 3 Pole Full Load mps. (Inductive) C 240V C 277V Locked Rotor (Per Pole) C 480V C 600V Resistive mps Rating Catalog Number TCDP203-XX TCDP253-XX TCDP303-XX TCDP403-XX Replace XX with voltage code from table - 1 Table-1: XX-C Coil Voltages Volt C Hz B5 G5 L5 U5 W5 T5 60 Hz B6 G6 L6 U6 W6 T6 Purpose These contactors are used for control of Motors, Power Supplies, Heating Elements, Lighting, HVC Fans and Compressors. Environment Maximum operating altitude: 2000 meters above sea level mbient ir Temp: - 40 degree to + 65 degree C mbient air dampness around the device: 45 to 85% RH Coil supply voltage: 80% - 110% rated voltage Coil Data Voltage : 24, 120, 240 VC 50 & 60 Hz Normal V : Inrush 65V, Sealed 7.5V Duty Cycle : continuous Initial Insulation Resistance : 100-mega ohms minimum. pprovals 15

16 Notes 16