Section. IEC Contactors Selection Guide...D-3. Non-Reversing Contactors YS1N AC Controlled...D-5 YS3N DC Controlled...

Transcription

1 Section Selection Guide...-3 Non-Reversing Contactors YS1N AC Controlled YS3N C Controlled Reversing Contactors YS1R AC Controlled YS3R C Controlled Thermal Overload Relay YS1T-RHA Starters Accessories...-1 Specifications Contactors and Starters Overload Relays Accessories imensions Mounting iagrams Wiring iagrams Application Tables for more information on this product family visit Additional Web Resources New and updated product information ownloadable software demos & upgrades Part configuration tool & cross reference Online stock check & ordering IEC field sales & distributor search Online literature request ownloadable manuals & CA drawings Manufacturer s suggested retail price list Product training schedule & locations Advertising & trade show schedules Press releases & FAQs

2 Selection Guide IEC YS Series Contactors / Starters YS Series: Superior performance and low maintenance Key features include: Simple, compact, rugged electromechanical devices Meets IEC, UL, c-ul and other international standards All Contactors, Thermal Overload Relays, and Auxiliary Contact Blocks bear the CE mark 35mm or 75mm IN Rail or direct panel mounting Bifurcated double bridge auxiliary contacts, the moving contact bridge has an H form; suitable for interface with electronic circuit Advanced design and materials, special silver-alloy long life contacts Cadmium-free contacts for environmental safety Bimetallic thermal overload relays Easy operation and maintenance; irect and simple motor control ual frequency 50/60 Hz coils IEC YS Series Contactors are used in switching motor loads. Like all IEC products, each model is engineered for long life, minimum maintenance, dependable operation, and superior performance. Snap on accessories are available for the IEC YS series, giving each model the flexibility to meet any application requirement. 1. Auxiliary contact blocks Top mounting type ( or 4 poles type) Side mounting type ( poles type). Adjustable thermal overloads 3. Surge suppressor modules 4. Mechanical interlock blocks 5. PLC interface modules - USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

3 Selection Guide Selection Guide RELAY INTERFACE MOULE SURGE SUPPRESSOR MOULES YS9Z-TU5 for YS1N-9F to -5F YS9Z-TU65 for YS1N-3F to -65F YS9Z-TU15 for YS1N-80F to -15F YS9Z-TU180 for YS1N-150F to -180F YS9Z-TU300 for YS1N-0F to -300F CONTACTORS Non-reversing YS1N, AC Controlled YS3N, C Controlled (With Surge Suppressor Module) YS9Z-TCU500UH The interface module incorporates contacts which are actuated upon energization of the module from low power 4VC sources such as outputs from sensors and programmable controllers. SECON CONTACTOR For reversing applications YS1R, AC Controlled YS3R, C Controlled (reversing type) MECHANICAL INTERLOCK BLOCKS Used for reversing contactors YS9Z-TMI65 for YS1N-9F through 65F YS9Z-TMI15 for YS1N-80F through 300F AUX. CONTACT BLOCK (P, side mounting type) YS1A-TAS11F for YS1N-9F to -65F AUX. CONTACT BLOCKS (4P, top mounting type) YS1A-TAH440F (4) YS1A-TAH431F (3-1) YS1A-TAH4F (-) YS1A-TAH413F (1-3) YS1A-TAH404F (4) for YS1N-9F to -65F AUX. CONTACT BLOCKS (P, top mounting type) YS1A-TAH0F () YS1A-TAH11F (1-1) YS1A-TAH0F () for YS1N-9F to -65F USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -3

4 YS Series YS Series Contactors Key features of the YS Series include: Compact size AC and C coil, reversing and non-reversing Weld-resistant silver alloy contacts No cadium used in contacts Highly reliable auxiliary contacts use bifurcated double bridge contact form irect panel mount with screws or 35mm IN rail (9F to 65F) Conforms to IEC standards: EN , EN , EN Approval standards: UL508 (UL File No. E67770, E184169) CE Certified Ordering Information IEC CONTACTORS Specify the maximum AC3 current code for the contactor in place of. Specify the coil voltage code for the contactor in place of ****. This part number is not indicated on the label of the contactor. YS1N- F11 **** Completed Part Number of Contactors 1 Product Series YS1N: Non- reversing contactor, AC controlled YS1R: Reversing contactor, AC controlled YS3N: Non-reversing contactor, C controlled YS3R: Reversing contactor, C controlled a) Approximate Maximum AC3 Current AC or C Controlled Contactors 9:9A, 1:1A, 0:0A, 5:5A, 3:3A, 38:38A, 40:40A, 50:50A, 65:65A, 80:80A, 100:100A, 15:15A AC Contactors Only 150:150A, 180:180A, 0:0A, 300:300A b) Type of Contactor 4 Coil Voltage (Rated Voltage and Frequency) A04 : AC4V 50/60Hz A048 : AC48V 50/60Hz A110 : AC110V 50/60Hz A10 : AC10V 50/60Hz A30 : AC30V 50/60Hz A40 : AC40V 50/60Hz A380 : AC380V 50/60Hz A415 : AC415V 50/60Hz A480 : AC480V 50/60Hz A600 : AC600V 50/60Hz 04 : C 4V 048 : C 48V 110 : C 110V 0 : C 0V M100 : C 110V M00 : C 0V (Other Voltages Available, Contact IEC) AC Contactors (all sizes) C Contactors (sizes 9-65) C Contactors (sizes 80-15) F: AC controlled all sizes FG: C Controlled, sizes 9-65 FG: C Controlled, sizes Auxiliary Contact Configuration (Built onto conctactor) 01: with 1, only for contactors sizes 9F-1F 10: with 1, only for contactors sizes 9F-1F 11: with 1-1, only for contactors sizes 0F-65F : with -, only for contactors sizes 80F-300F Notes: 1. Use the above ordering information only when interpreting part numbers. o not use for developing part numbers.. Please see tables on following pages for proper selection. 3. For specifications please see page -16 through page USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

5 YS Series YS1N Non-Reversing AC Contactors, AC Controlled AC1 I e (Amps) AC3 kw AC3 Rating EN HP Rating per UL508 Auxiliary 3 Phase 1 Phase 3 Phase Contacts 0-30V V 500V V 10V 30V 00-08V 0-40V V / V N.O. N.C. Part Number 0 1 YS1N-9F01**** 1 0 YS1N-9F10**** / YS1N-1F01**** 1 0 YS1N-1F10**** YS1N-0F11**** YS1N-5F11**** YS1N-3F11**** YS1N-38F11**** YS1N-40F11**** YS1N-50F11**** YS1N-65F11**** YS1N-80F**** YS1N-100F**** YS1N-15F**** YS1N-150F**** YS1N-180F**** YS1N-0F**** YS1N-300F**** Codes for Control Circuit AC Voltages 50/60 Hz Volts AC 50/60 Hz Code to replace **** A04 A048 A10 A0 A40 A380 A415 A480 Consult an IEC representative for other coil voltages. For accessories, see page -1. For specifications, see page -16 through -34. For dimensions, see pages -35. For other application tables, see page USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -5

6 YS Series YS3N Non-Reversing C Contactors, C Controlled AC1 I e (Amps) AC3 KW AC3 Rating EN HP Rating per UL508 Auxiliary 3 Phase 1 Phase 3 Phase Contacts 0-30V V 500V V 10V 30V 00-08V 0-40V V / V N.O. N.C. Part Number 0 1 YS3N-9FG01**** 1 0 YS3N-9FG10**** / YS3N-1FG01**** 1 0 YS3N-1FG10**** YS3N-0FG11**** YS3N-5FG11**** YS3N-3FG11**** YS3N-38FG11**** YS3N-40FG11**** YS3N-50FG11**** YS3N-65FG11**** YS3N-80FG**** YS3N-100FG**** YS3N-15FG**** Codes for Control Circuit C Voltages, 9F through 65F Codes for 80F/100F/15F Volts C Code to replace **** M100 M00 Consult an IEC representative for other coil voltages. For accessories, see page -1. For specifications, see pages -16 through -34. For dimensions, see page -35. For other application tables, see page USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

7 YS Series YS1R Reversing AC Contactors, AC Controlled AC1 I e (Amps) AC3 kw AC3 Rating EN HP Rating per UL508 Auxiliary 3 Phase 1 Phase 3 Phase Contacts 0-30V V 500V V 10V 30V 00-08V 0-40V V / V N.O. N.C. Part Number 0 1 YS1R-9F01**** 1 0 YS1R-9F10**** / YS1R-1F01**** 1 0 YS1R-1F10**** YS1R-0F11**** YS1R-5F11**** YS1R-3F11**** YS1R-38F11**** YS1R-40F11**** YS1R-50F11**** YS1R-65F11**** YS1R-80F**** YS1R-100F**** YS1R-15F**** YS1R-150F**** YS1R-180F**** YS1R-0F**** YS1R-300F**** Codes for Control Circuit AC Voltages 50/60 Hz Volts AC 50/60 Hz Code to replace **** A04 A048 A10 A0 A40 A380 A415 A480 Consult an IEC representative for other coil voltages. For accessories, see page -1. For specifications, see page -16 through -34. For dimensions, see pages -35. For other application tables, see page USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -7

8 YS Series YS3R Reversing C Contactors, C Controlled AC1 I e (Amps) AC3 kw AC3 Rating EN HP Rating per UL508 Auxiliary 3 Phase 1 Phase 3 Phase Contacts 0-30V V 500V V 10V 30V 00-08V 0-40V V / V N.O. N.C. Part Number 0 1 YS3R-9FG01**** 1 0 YS3R-9FG10**** / YS3R-1FG01**** 1 0 YS3R-1FG10**** YS3R-0FG11**** YS3R-5FG11**** YS3R-3FG11**** YS3R-38FG11**** YS3R-40FG11**** YS3R-50FG11**** YS3R-65FG11**** YS3R-80FG**** YS3R-100FG**** YS3R-15FG**** Codes for Control Circuit C Voltages, 9F through 65F Codes for 80F/100F/15F Volts C Code to replace **** M100 M00 Consult an IEC representative for other coil voltages. For accessories, see page -1. For specifications, see page -16 through -34. For dimensions, see pages -35. For other application tables, see page USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

9 YS Series Thermal Overload Relays YS1T-RHA thermal overload relays are designed to meet the heating characteristics of induction motors with insulation class type E. Various functions can be selected by using the reset button and adjustment button on top of the thermal overload relay. Key features of the YS1T Series include: Single-phase protection Bi-metallic Compact and sturdy Ambient temperature compensation mechanism Manual/automatic reset operation 3 element type with phase failure protection Conforms to IEC Standards EN , EN , EN Approval standards UL508, UL File No. E Ordering Information THERMAL OVERLOA RELAYS Part number is indicated on the label of the thermal overload relay. YS1T-RHA Completed Part Number of Thermal Overload Relay 1 Product Series Applicable Maximum Motor Current 5F: 5A, contactor sizes 9F,1F, 0F, 5F 38F: 40A, contactor sizes 3F, 38F 65F: 65A, contactor sizes 40F, 50F, 65F 15F: 15A, contactor sizes 80F, 100F, 15F 150F: 150A, contactor sizes 150F or 180F 180F: 180A, contactor sizes 150F or 180F *300F: 300A, contactor size 0F or 300F *400F: 400A, contactor size 0F or 300F Note: *With Current Transformer (CT) 4 Function : 3-element Type with Phase Failure Protection 3 Current setting range code P13 : P0 : P30 : P50 : P80 : 1P3 : 1P5 : P0 : 3P0 : 5P0 : 7P0 : 8P5 : 11P : 15P : 1P : 7P : 3P : 35P : Adjustable current range Current setting range code 43P : 56P : 68P : 80P : 105 : 10* : 135 : 155 : 160* : 180* : 40* : Note :*With CT Adjustable current range Verify appropriate current setting range code with the correct size overload using the complete part list on the following page. Notes: 1. Use the above ordering information only when interpreting part numbers. o not use for developing part numbers.. For applicable combinations of contactors and thermal overload relays, please consult following page. 3. For specifications and settings please see pages -16 through USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -9

10 YS Series Thermal Overload Relays Product Series Current Range Range Code Part Number for Overload Applicable Contactor Size YS1T-RHA5F YS1T-RHA38F YS1T-RHA65F YS1T-RHA15F YS1T-RHA150F YS1T-RHA180F *YS1T-RHA300F *YS1T-RHA400F *with current transformer A P13 YS1T-RHA5FP A P0 YS1T-RHA5FP A P30 YS1T-RHA5FP A P50 YS1T-RHA5FP A P80 YS1T-RHA5FP A 1P3 YS1T-RHA5F1P A 1P5 YS1T-RHA5F1P A P0 YS1T-RHA5FP A 3P0 YS1T-RHA5F3P A 5P0 YS1T-RHA5F5P A 7P0 YS1T-RHA5F7P A 8P5 YS1T-RHA5F8P A 11P YS1T-RHA5F11P A 15P YS1T-RHA5F15P P YS1T-RHA5F1P 9-13A 11P YS1T-RHA38F11P 1-18A 15P YS1T-RHA38F15P 17-5A 1P YS1T-RHA38F1P 3-3A 7P YS1T-RHA38F7P 8-36A 3P YS1T-RHA38F3P 30-40A 35P YS1T-RHA38F35P 1-18A 15P YS1T-RHA65F15P 17-5A 1P YS1T-RHA65F1P 3-3A 7P YS1T-RHA65F7P 8-36A 3P YS1T-RHA65F3P 30-40A 35P YS1T-RHA65F35P 37-50A 43P YS1T-RHA65F43P 48-65A 56P YS1T-RHA65F56P 37-50A 43P YS1T-RHA15F43P 48-65A 56P YS1T-RHA15F56P 55-80A 68P YS1T-RHA15F68P 65-95A 80P YS1T-RHA15F80P 85-15A 105 YS1T-RHA15F A 80P YS1T-RHA150F80P 85-15A 105 YS1T-RHA150F A 135 YS1T-RHA150F A 105 YS1T-RHA180F A 135 YS1T-RHA180F A 155 YS1T-RHA180F A 10 YS1T-RHA300F A 180 YS1T-RHA300F A 160 YS1T-RHA400F A 40 YS1T-RHA400F40 YS-9F YS-1F YS-0F YS-5F YS-3F YS-38F YS-40F YS-50F YS-65F YS-80F YS-100F YS-15F YS-150F YS-180F YS-150F YS-180F YS-0F YS-300F USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

11 YS Series YS Series Starters Ordering Instructions for an Assembled Starter STARTERS (Contactors with Thermal Overload Relay) Select the appropriate contactor (AC or C, reversing or non-reversing) from pages -5 through -8. Select the correct size overload from page -9 throught -10. The complete assembled part number is the same as the contactor with the following changes: (See examples below) Completed Part Number of Reversing Starter YSR - F 11 **** T### 1 Product Series YS1N contactor ----> YSN AC non-reversing Starter YS1R contactor ----> YSR AC reversing Starter YS3N contactor ----> YS4N C non-reversing Starter YS3R contactor ----> YS4R C reversing Starter Maximum AC3 Current (replaced exactly from contactor P/N) F: is replaced by size, for AC controlled FG: is replaced by size, 9-65 for C controlled FG: is replaced by size, for C controlled 3 Thermal Overload Relay : 3-element Type with Phase Failure Protection 4 Auxiliary Contact Configuration (Replaced exactly from contactor P/N) 01: with 1, for contactor sizes 9F-1F 10: with 1, for contactor sizes 9F-1F 11: with 1-1, for contactor sizes 0F-65F : with -, for contactor sizes 80F-300F 5 Coil Voltage (Replaced exactly from contactor P/N) 6 Thermal Overload Relay, Type YS1T-RHA T: Thermal Overload Relay + ###: Three character code designating of Current Setting Range Code (See page -10.) EXAMPLE #1 : Contactor : YS1R-9F10A10 + Overload: YS1T-RHA5F5P STARTER: YSR-9F10A10T5P EXAMPLE # : Contactor : YS3N-65FG Overload: YS1T-RHA65F43P STARTER: YS4N-65FG1104T43P USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -11

12 Accessories Accessories Accessory escription Part Number Notes Auxiliary Contact Blocks Number of Poles Poles 4 Poles Mounting Style Contact Configuration Side 1 1 YS1A-TAS11F Top 0 YS1A-TAH0F 1 1 YS1A-TAH11F 0 YS1A-TAH0F 0 4 YS1A-TAH404F 1 3 YS1A-TAH413F YS1A-TAH4F 3 1 YS1A-TAH431F Auxiliary contacts only available for contactors from 9F through 65F. Replacement Auxiliary Contact Block Power Wire Kits 4 0 YS1A-TAH440F Poles Side 1 1 YS1A-TAS11FL For use with YS-9F through YS-1F YS9Z-KIF A For use with YS-0F through YS-5F YS9Z-KIF A For use with YS-3F through YS-38F YS9Z-KIF A For use with YS-40F through YS-65F YS9Z-KIF A For use with YS-80F through YS-15F YS9Z-KIF A Replacements for attached auxiliary contact blocks on contactors 80F through 300F For use with YS-150F YS9Z-KIF A For use with YS-180F YS9Z-KIF B For use with YS-0F through YS-300F YS9Z-KIF A Mechanical Interlock For use with YS-9F through YS-65F YS9Z-TMI65 For use with YS-80F through YS-300F YS9Z-TMI15 Marking Tags For use with YS-9F through YS-65F YS9Z-TIP66 Overload IN Rail Bracket For use with YS1T-RHA65F overload YS9Z-TIB65F Assembled Pushbutton for Overload Reset w/ Extension Rod Blank Cap / No engraving Cap engraved with R Cap engraved with RESET Sub Assembled Operator Blank Cap / No engraving HW1B-M1RS-*T HW1B-M1RS-*T-ENG-R HW1B-M1RS-*T-ENG-RESET HW1B-M0 HW1A-B1-* * Choose cap color B= Black Y= Yellow N= Gray G= Green S= Blue R= Red W=White Rod (10 inch length; adjustable) HW9Z-RS-TK USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

13 Accessories Accessories, continued Accessory escription Part Number * Applicable Size Codes Surge Suppressor Type Rated Voltage Relay Interface Module RC Circuit Varistor 50-17V AC YS9Z-TU*C V AC YS9Z-TU*C V AC YS9Z-TU*V V AC YS9Z-TU*V V AC YS9Z-TU*V440 Isolates the coil of contactor from PLC output by providing an easy to mount module that takes 4V C input and switches up to 380V AC for contactor coils. External source required for contactor coil. Star (Wye) elta Timer Input Voltage Contact Style Replacement Coils 100V AC to 40V AC 50/60 Hz AC Coils for AC Contactors Star: elayed SPST- elta: elayed SPST- Star: elayed SPST- elta: elayed SPST- Instantaneous SPST- For use with YS-9F through YS-1F For use with YS-0F through YS-5F For use with YS-3F to YS-38F For use with YS-40F to YS-65F For use with YS-80F to YS-15F For use with YS-150F to YS-180F For use with YS-0F to YS-300F C Coils for C Contactors 9F through 65F For use with YS-9F through YS-5F For use with YS-3F through YS-38F For use with YS-40F through YS-65F C Coils for C Contactors 80F through 15F For use with YS-80F through YS-15F # 8-pin 11-pin 8-pin 11-pin AC/C Module for 80F through 15F C coils only 100V AC/C Module for YS-80F through YS-15F 00V AC/C Module for YS-80F through YS-15F YS9Z-TCU500UH* GT3S-1AF0 GT3S-1EAF0 GT3S-AF0 GT3S-EAF0 YS9Z-KIL70461-* YS9Z-KIL7046-* YS9Z-KIL70463-* YS9Z-KIL70464-* YS9Z-KIL70518-* YS9Z-KIL70466-* YS9Z-KIL70467-* YS9Z-KIL7056-* YS9Z-KIL70564-* YS9Z-KI * YS9Z-KIL70519-* YS9Z-KIFCA840546A YS9Z-KIFCA840546B 5 = YS-9F to YS-5F 65 = YS-3F to YS-65F 15 = YS-80F to YS-15F 180 = YS-150F to YS-180F 300 = YS-0F to YS-300F 1 = YS-9F to YS-1F 5 = YS-0F- to YS-5F 38 = YS-3F to YS-38F 65 = YS-40F to YS-65F 15 = YS-80F to YS-15F 180 = YS-150F to YS-180F 300 = YS-0F to YS-300F See Section G for further information A04 = 4V AC 50/60 Hz A048 = 48V AC 50/60 Hz A10 = 10V AC 50/60 Hz A40 = 40V AC 50/60 Hz A380 = 380V AC 50/60 Hz A480 = 480V AC 50/60 Hz A600 = 600V AC 50/60 Hz 04 = 4V C 048 = 48V C 110 = 110V C 0 = 0V C 110 = 110V C 0 = 0V C Used in conjunction with YS9Z-KIL * for C coils 80F through 15F only. # YS9Z-KIL70519* is available ONLY in 110V (110) or 0V (0) models. USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -13

14 Accessories Accessories, continued Accessory escription Part Number 6 pieces required per contactor 3 pieces required per contactor Stationary Main Contacts For use with YS-0F For use with YS-5F For use with YS-3F For use with YS-38F For use with YS-40F For use with YS-50F For use with YS-65F For use with YS-80F For use with YS-100F For use with YS-15F For use with YS-150F For use with YS-180F For use with YS-0F For use with YS-300F Moving Main Contacts For use with YS-0F For use with YS-5F For use with YS-3F For use with YS-38F For use with YS-40F For use with YS-50F For use with YS-65F For use with YS-80F For use with YS-100F For use with YS-15F For use with YS-150F For use with YS-180F For use with YS-0F For use with YS-300F each part number is for ONE (1) main contact YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF B YS9Z-KIF C YS9Z-KIF A YS9Z-KIF B YS9Z-KIF C YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF41184-A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF B YS9Z-KIF C YS9Z-KIF A YS9Z-KIF B YS9Z-KIF C YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A YS9Z-KIF A All part numbers refer to one piece quantity (not sets) USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

15 Accessories Accessories, continued Part Number escription For Use With BAA mm Aluminum IN Rail 7.5 mm deep 1 meter long YS1N-9F through YS1N-38F Contactors BNN mm Aluminum IN Rail 10.5 mm deep. 1 meter long YS1N-9F through YS1N-38F Contactors YS9Z-TIP66 Markers BNL8 Plastic replacement markers sold in 100 piece packs IN Rail End Stop used to prevent contactors from sliding on IN rails YS-9F through YS-65F series contactors, overloads relays and top mount auxiliary contact blocks. YS1N-3F/YS1N-38F & YS1R reversing contactors BNL5 IN Rail End Stop used to prevent contactors from sliding on IN rails YS1N-9F YS1N-1F YS1N-0F YS1N-5F Contactors SRP-05C 8-pin IN mount Finger-safe (IP0) screw terminal socket GT3S-1AF0 timer (8 pin) GT3S-AF0 timer (8 pin) SRP-06 8-pin IN mount screw terminal socket open terminal construction GT3S-1AF0 timer (8 pin) GT3S-AF0 timer (8 pin) SR3P-05C 11-pin IN mount finger-safe (IP0) screw terminal socket GT3S-1EAF0 timer (11pin) GT3S-EAF0 timer (11pin) SR3P pin IN mount screw terminal socket open terminal construction GT3S-1EAF0 (11 pin) GT3S-EAF0 (11 pin) USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -15

16 Specifications Specifications Contactor Circuit Supply: AC Characteristics Part Number YS1N 9F 1F 0F 5F 3F 38F 40F 50F 65F 80F 100F 15F 150F 180F 0F 300F Rated Insulation Voltage V Conformity to Standards Approvals NFC ; VE 0660; BS 544; JEM 1038; EN , ; UL508 UL, c-ul egree of Protection Finger-safe (according to VE 0106) ry Ambient Air Temp. for Storage 1/4C -40 to +80 ry Ambient Air Temp. for Operation 1/4C -10 to +55 (0.85 to 1.1 Un) Operating Altitude m 000 Operating Position (without derating Main Power Pole Utilization Characteristics: ±301/4 compared with the normal vertical mounting plane (see table on -) Number of Poles: 3 Part No. 9F 1F 0F 5F 3F 38F 40F 50F 65F 80F 100F 15F 150F 180F 0F 300F Rated Operational Current in AC3 A in AC1 A Rated Operational Voltage V Maximum Thermal Current Ith ( 55 C) A Making Capacity I rms A Breaking Capacity V A I rms 500V A According to EN V A Wiring, minimum-maximum wire size: Stranded Wire (without ferrule) 1 Conductor Conductors mm AWG /0 8-4/ mcm 4-300mcm mm AWG /0 4-3/0 Solid Wire (without ferrule) 1 Conductor Conductors mm AWG mm AWG USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

17 Specifications Control Circuit Characteristics: Part Number YS1N- 9F 1F 0F 5F 3F 38F 40F 50F 65F 80F 100F 15F 150F 180F 0F 300F Rated AC Control Voltage (50 or 60 Hz) : Un V Un: 4 to 600 Coil Limits ( 55 C) Operating Limits Un 85% to 110% Un rop-out Voltage Un 30% to 70% Un Coil Power Consumption (0 C) in Un Inrush VA AC 50 Hz Cos Ø (power factor) Sealed VA AC 60 Hz Coil Power Consumption Cos Ø (power factor) Inrush VA Cos Ø (power factor) Sealed VA Cos Ø (power factor) Hz W 1.5 to to to to to to to to to to to to 11 1 to 16 1 to to 7 19 to 7 60 Hz W 1.0 to to to to to to to to to to to to to to to 3 16 to 3 Mechanical Life at Rated Control Voltage (Un) ( 10 6 operating cycles) Switching Frequency Minimum-Maximum Wire Size Mechanical ops/h Electrical AC Stranded Wire (without ferrule) Solid Wire (without ferrule) 1 Conductor Conductors 1 Conductor Conductors mm AWG mm AWG mm AWG mm AWG USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -17

18 Specifications Coil Resistance: Coil Voltage Resistance (Ω) YS1N-9F/1F YS1N-0F/5F YS1N-3F/38F YS1N-40F/50F/65F YS1N-80F/100F/15F YS1N-150F/180F YS1N-0F/300F 4V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz V 50/60Hz Operating Time: Frame Size Contactor 50Hz 60Hz Basic Part Number Main Closing (msec) Opening (msec) Closing (msec) Opening (msec) Aux. () Aux. () Main Aux. () Aux. () Main Aux. () Aux. () Main Aux. () Aux. () YS1N-9F YS1N-1F YS1N-0F YS1N-5F YS1N-3F YS1N-38F YS1N-40F YS1N-50F YS1N-65F YS1N-80F YS1N-100F YS1N-15F YS1N-150F YS1N-180F YS1N-0F YS1N-300F 11 to to 17 8 to 1 5 to 13 5 to 13 7 to to to 15 7 to 1 5 to 13 6 to 14 7 to to 15 to 9 to 16 3 to 13 6 to 13 9 to to 0 13 to 0 9 to 13 to 1 7 to 13 9 to to 3 15 to 3 8 to 16 6 to 15 7 to 15 1 to 3 16 to 4 16 to 4 9 to 16 5 to 14 7 to to 1 14 to 16 to 4 10 to 16 6 to 17 5 to to 3 15 to 15 to 9 to 16 7 to 16 7 to to 0 10 to 7 10 to 6 6 to 19 6 to 0 6 to 0 10 to 6 13 to 31 1 to 30 8 to 6 to 18 6 to to 4 17 to to to 31 8 to 5 8 to 8 1 to 9 1 to 39 0 to to 9 5 to 7 to 11 to 9 17 to to to 33 8 to 7 8 to 30 1 to 31 to 41 1 to to 31 5 to 4 7 to 4 11 to 31 Notes: 1. The operating time depends on the type of contactor electromagnet and its control mode.. The closing time is measured from the time the coil power supply is switched on to the time the main contacts first make contact. 3. The opening time is measured from the time the coil power supply is switched off to the time the main contacts separate. 4. The duration of the arcing time depends on the type of circuit switched by the poles. 5. For normal three-phase applications the duration of the arcing time is normally less than 10 ms. 6. The load is isolated from the coil power supply after a time equal to: the sum of the opening time and the arcing time USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

19 Specifications Contactor Circuit Supply: C Operating Coil Characteristics Part Number YS3N-9FG YS3N-1FG YS3N-0FG YS3N-5FG YS3N-3FG YS3N-38FG YS3N-40FG YS3N-50FG YS3N-65FG YS3N-80FG YS3N-100FG YS3N-15FG Coil Voltage (V) Exciting Current (ma) Pick-Up Voltage (V) rop-out Voltage (V) Coil Resistance ( 1 / ) Power Consumption (W) 4V C 14 to 6 10 to 15 5 to to V C 108 to 13 1 to to to V C 51 to to 63 1 to to V C 6 to to to to 6.8 4V C 14 to 6 10 to 15 5 to to V C 108 to 13 1 to to to V C 51 to to 63 1 to to V C 6 to to to to 6.8 4V C 335 to to 16 4 to to V C 165 to 0 3 to 3 8 to to V C 76 to to to to V C 36 to to to to 9.1 4V C 516 to to 17 4 to to V C 15 to 63 7 to 33 8 to to V C 103 to to to to V C 53 to to to to V C 19 to 4 76 to to 54 00V C 11 to to to 98 Standard Operating Time Coil Applied Voltage 100%Uc Part Number Closing Time (ms) Opening Time (ms) Main Aux. () Aux. () Main Aux. () Aux. () YS3N-9F 1 38 to to 45 5 to 10 5 to 10 YS3N-1F 1 38 to to 45 6 to 1 8 to 13 YS3N-0FG, -5FG 45 to to to 46 6 to 1 6 to 1 10 to 16 YS3N-3FG, -38FG 59 to to to 56 7 to 19 7 to to 3 YS3N-40FG, -50FG, -65FG 46 to to to 47 3 to 3 3 to 3 7 to 36 YS3N-80FG, -100FG, -15FG 3 to 4 3 to 4 4 to to to 56 4 to 6 Operating Limited istances Rated Operational Voltage 100VC Rated Operational Voltage 00VC Part Number Coil Applied Voltage 100VC Coil Applied Voltage 00VC Wire Sectional Area Wire Sectional Area 1.5mm mm 3.5mm 1.5mm mm 3.5mm YS3N-9FG, -1FG 3. km 5.0 km 9. km 1.6 km 19.7 km 36.4 km YS3N-0FG, -5FG 3. km 5.0 km 9. km 1.6 km 19.7 km 36.4 km YS3N-3FG, -38FG.1 km 3.4 km 6.3 km 9.1 km 14.3 km 6.3 km YS3N-40FG, -50FG, -65FG 1.6 km.5 km 4.6 km 6. km 9.7 km 18.0 km YS3N-80FG, -100FG, -15FG km 0.13 km 0.39 km km km 1.46 km USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -19

20 Specifications Electrical Life Curves Electrical Life Curves Fig.1 Utilization Category AC3 Millions of Operating Cycles 10 YS1N-9F YS1N-1F YS1N-0F YS1N-38F,-40F YS1N-50F YS1N-65F YS1N-80F YS1N-100F YS1N-15F YS1N-150F YS1N-180F YS1N-0F YS1N-300F AC3 Ue < 440V YS1N-5F Breaking current Ic (A) V V V Power rating in kw - 50 Hz category AC3 YS1N-3F Control of three-phase squirrel cage motors switching off during running The breaking current in AC3, Ic, is equal to Ie. (le= rated operational current of the motor) Fig. Utilization Category AC4 Millions of Operating Cycles 1 YS1N-9F YS1N-1F YS1N-0F YS1N-38F,-40F YS1N-50F YS1N-65F YS1N-80F YS1N-100F YS1N-15F YS1N-150F YS1N-180F YS1N-0F YS1N-300F AC4 380V < Ue 440V Breaking current Ic (A) YS1N-5F YS1N-3F Control of three-phase squirrel cage motors switching off with locked rotor The breaking current in AC4, Ic, is equal to 6 x Ie. (Ie = rated operational current of the motor) -0 USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

21 Specifications Fig. 3 Utilization Category AC1 Millions of Operating Cycles 10 YS1N-9F YS1N-1F YS1N-0F YS1N-38F,-40F YS1N-50F YS1N-65F YS1N-80F YS1N-100F YS1N-15F YS1N-150F YS1N-180F YS1N-0F YS1N-300F AC1 Ue < 440V YS1N-5F Breaking current Ic (A) Switching a resistive circuit (cos ø 0.95) The breaking current in AC1, Ic, is equal to Ie. (le = rated operational current of the load) YS1N-3F Electrical Life in Mixed AC3/AC4 uty Applications By calculation: In a mixed AC3/AC4 application, electrical life can be calculated using the following formula: L = A3 1+ P ( A3-1 ) 100 A4 L: Electrical life in mixed AC3/AC4 application A3: Electrical life for breaking current equal to the rated current of the motor. (AC3 from Fig. 1) A4: Electrical life for a breaking current during starting or plug braking equal to Ic = Kle, where: K 6 Ie = rated motor current (AC4 from fig. ) P/100: ratio of switching off during starting or plug braking USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -1

22 Specifications 1. Operating Specifications Operating and Mounting Specifications for Contactors and Starters Ambient Temperature Temperature inside the control panel Relative humidity. Mounting -5 to +40 C -5 to +55 C 45% to 85% RH Altitude No more than,000m Vibration resistance Shock resistance Storage temperature 10 to 50Hz 19.6m/s (G) 49.0m/s (5G) -40 C to +70 C irect Mounting 1. Install the product in a dry area with minimal dust and vibration.. Standard mounting is done on a vertical surface in the directions shown in Figure 1. However, a mounting angle up to 30 degrees is allowed in each direction as shown in Figure. Operational characteristics of the product, when mounted with these angles are listed on the next page Figure 1 Figure IN Rail Mounting YS Series electromagnetic contactors/starters YS1N/YSN-9F through -38F models can be mounted on 35mm wide IN rail, and YS1N/ YSN -40F through -65F models can be mounted on 75 mm wide IN rails, as specified in the table below. When mounting the product on IN rails, keep in mind the following points: 1. Spacing between the products: contributes to a temperature rise and affects the product life. Maintain the minimum spacing as specified in the table below. IN rail mounting holes: To ensure sufficient mechanical strength, the mounting holes should be placed no further apart than those specified in the table below. Product Category IN rail width (mm) Minimum spacing between contactors (mm) istance between mounting screws (mm) Contactor Starter (G) (L) YS1N-9F YSN-9F YS1N-1F YSN-1F YS1N-0F YSN-0F YS1N-5F YSN-5F YS1N-3F YSN-3F YS1N-38F YSN-38F YS1N-40F YSN-40F YS1N-50F YSN-50F YS1N-65F YSN-65F Minimum Space Between Contactors (mm) G istance Between Mounting Screws L L L Mounting Screw - USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

23 Specifications Mounting Angle and Operational Characteristics of the YS1N, YSN, YS1R, YSR Contactor /Starter Nonreversing Reversing Maximum turn-on voltage (V) Minimum turn-off voltage (V) Coil Frequency (Hz) YS1N/ YSN YS1R/ YSR -9F -9F -1F -1F -0F -0F -5F -5F -3F -3F -38F -38F Standard/ normal mounting left 30 right 30 tilted forward tilted backwards Standard/ normal mounting left 30 right 30 tilted forward tilted backwards F -40F F -50F F -65F F -80F F -100F F -15F Coils with the following rated voltage were used to obtain the above values: YS1N-9F to-65f: 00V 50Hz, 00-00V 60Hz YS1N-80F to-15f: 00-0V 50Hz, 00-0V 60Hz USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -3

24 Specifications Operating and Mounting Specifications for Thermal Overload Relays Ratings and Characteristics: Part Number:YS1T-RHA 5F- 38F- 65F- 15F- 150F- 180F- 300F- 400F- Contact Configuration 1+1 Number of Elements 3 Trip Free Reset Operation Convertible from manual to automatic Ambient Temperature Compensation -5 to +55 C ial esignation Rated current Setting Scale Indication Ampere (A) Main Circuit Operation Position ± 30 with respect to the normal position (See chart on page 65) Tripping Class Conforming to UL 508, EN Rated Insulation Voltage (V) 750 Range of Setting Current (A) Stranded Wire without Ferrule Solid Wire without Ferrule 1 Conductor mm Conductors mm Conductor mm Conductors mm Characteristics of Auxiliary Contacts: Rated Thermal Current Rated Operational Current per EN AC (AC-15) C (C-13) 4 A Rated Voltage 4V AC 48V AC 110V AC 0V AC 380V AC 600V AC Rated Current 4A 4A 3A A 1.5A 0.3A Rated Voltage 4V C 48V C 110V C 0V C Rated Current 1A 0.5A 0.5A 0.1A Maximum Cross Section Minimum Cross Section Stranded Wire without Ferrule Solid Wire without Ferrule Stranded Wire without Ferrule Solid Wire without Ferrule 4mm (10AWG) 4mm (10AWG) 1mm (18AWG) 1mm (18AWG) UL / c-ul Ratings of Auxiliary Contacts: Rated Thermal Current 4A Rated Operational Current per UL 508 AC (C600) C (R300) Rated Voltage 10V AC 40V AC 480V AC 600V AC Rated Current 1.5A 0.75A 0.4A 0.3A Rated Voltage 15V C 50V C Rated Current 0.A 0.1A -4 USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

25 Specifications Fig. 4 Tripping Curves Average operating times, depending on the multiples of the current Tripping Time (sec.) Multiple of Current Setting 3 1 Balanced operation, 3-phase, from cold state. Balanced operation, -phase, from cold state. 3 Balanced operation, 3-phase, after a long period of set current flow (hot state). Reset Mode Selection and Setting H HAN AUTO A Function Position H R HAN AUTO A R Tripping Check YES YES Reset Hand-Reset Hand-Reset Auto-Reset Auto-Reset Contact Condition otted line indicates the condition when the reset button is depressed Insert screwdriver into the select button, turn it clockwise to the "H" position. The select button is set in "HAN" position, when shipped from factory. epress the reset button to below 1, insert screwdriver into the select button, turn counter-clockwise to the "AUTO" position Insert screwdriver into the select button, turn counter-clockwise to the "A" position. Setting Method Select Button (Red) Reset Button (Gray) 1 Remarks Can't check manual trip when in Hand-reset condition Normal position for Hand-reset Normal position for Auto-reset Can't check manual trip when in Auto-reset condition USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -5

26 Specifications Operating Time Characteristics of Thermal Overload Relays YS1T-RHA38F, YS1T-RHA65F YS1T-RHA5F Operating Time (In Seconds) YS1T-RHA15F Current (% of Steady State) 1000 Starting Characteristic Load Characteristics Operating Time (In Seconds) YS1T-RHA150F Current (% of Steady State) 1000 Starting Characteristic Load Characteristics Operating Time (In Seconds) Starting Characteristic Load Characteristics Operating Time (In Seconds) Load Characteristics Starting Characteristic Current (% of Steady State) Current (% of Steady State) -6 USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

27 Specifications Operating Time Characteristics of Thermal Overload Relays, continued YS1T-RHA180F YS1T-RHA300F, YS1T-RHA400F Operating Time (In Seconds) Current (% of Steady State) Starting Characteristics Load Characteristics Operating Time (In Seconds) Current (% of Steady State) Load Characteristics Starting Characteristics USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -7

28 Specifications Specifications for Accessories AC Ratings of Auxiliary Contacts AC Ratings per EN AC Ratings (EN ) UL / c-ul AC Ratings (UL 508) Wire Sizes for Auxiliary Contacts YS1N-9F to -300F Rated Insulation Voltage (V) 660 Rated Thermal Current (A) 10 Rated Operational Current AC-15 (A) AC 00-40V 3 AC V 1.5 AC V 1. Rated Insulation Voltage (V) 600 Rated Thermal Current (A) 10 Rated Operational Current (NEMA A600) AC 10V 6 AC 40V 3 AC 480V 1.5 AC 600V 1. Minimum-Maximum Wire Size YS1N-9F to -300F Stranded Wire (without ferrule) Solid Wire (ferrule) 1 Conductor Conductors 1 Conductor Conductors mm (AWG) mm (AWG) mm (AWG) mm (AWG) 1-4 (18-10) 1-4 (18-10) 1-4 (18-10) 1-4 (18-10) Instructions for Assembling Auxiliary Contact Blocks: For each magnetic contactor/starter, up to four contacts of the auxiliary contact blocks can be mounted. Two contacts of the top-mount style and two contacts of the side mount style can be combined. YS1A-TAH YS1A-TAH4 YS1A-TAH YS1A-TAS YS1A-TAS YS1A-TAS YS1A-TAH YS1A-TAS YS1A-TAS YS1A-TAH4 YS1A-TAS YS1A-TAS Terminal Numbers and Mounting Examples of Auxiliary Contact Blocks, Side-Mount Style YS1N-9F to -65F YS1R-9F to -65F A C R S T F E G U V W A C R S T U V W R S F F E E A G G C T U V W Note: If you would like to mount two side-mount auxiliary contact blocks (TAS style) to a YS1N non-reversing contactor, mount YS1A-TAS11F USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

29 Mounting and Removing Auxiliary Contact Block on the Contactor Specifications Top Mount Style 1. Position the contactor and the auxiliary contact block in the same direction.. Insert the auxiliary contact block into the area of the top of the contactor. Slide the auxiliary contact until it bottoms (o not force.) Make sure that the locking hook is locked into position as shown Removal Procedure While lightly lifting the locking hook with your finger, slide the auxiliary contact unit out. Side-Mount Style 1. Contactor plunger. Inside this area, there are locking hooks (upper and lower areas) IN rail Mounting 1. Make sure that the auxiliary contact block (right or left side) and the terminal numbers on the contactor are in the same direction.. Push the plunger of the contactor downwards approximately mm. While holding the plunger in this manner, insert the white protruding portion of the auxiliary contact block into the square groove of the side of the contactor. Make sure that the locking hook is locked into position. Removal Procedure Hold the auxiliary contact block and pull it off. USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -9

30 Specifications Surge Suppressor Module Connection Terminal (M3,5) Internal Circuit Operational Indicator (LE) 34 RC Type Varistor Type 6 Contactor Size Figure Number Operational Indicator (LE) Surge Suppressor Module Connection Terminal (M3,5) imensions A B C E RC Type Varistor Type Internal Circuit B YS1N-9F 1 YS9Z-TU C A E YS1N-1F 1 YS9Z-TU YS1N-0F YS9Z-TU YS1N-3F YS9Z-TU Figure 1 YS1N-38F YS9Z-TU B YS1N-50F YS9Z-TU C A YS1N-65F YS9Z-TU E YS1N-80F YS9Z-TU Figure Mounting Procedure 1. Line up the surge suppressor module and the contactor as shown in the figure on the right. (Make sure the orientation of the surge suppressor module is such that the LE is visible.). Insert the U-shaped indentations of the surge suppressor module into the connection flange of the contactor as shown in the figure on the right. 3. Loosen the contactor screws, insert the fork lugs of the surge suppressor module, and re-tighten the screw terminals. Removal Procedure 1. Loosen coil screw terminals and remove the fork lugs of the surge suppressor module.. Insert a screwdriver between the U-shaped indentation of the surge suppressor module and the connection flange of the contactor, and pry the module off the contactor. Connection indentation, U-shaped(on both sides of the surge suppressor module) Connection flange USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC

31 Specifications of Relay Interface Module Specifications YS9Z-TCU500UH Rated Voltage 4V C Maximum Allowable Voltage 130% of rated voltage Input (coil) Power Consumption 0.W Pick-up Voltage (at 0 C) 70% of rated voltage rop-out Voltage (at 0 C) 10% of rated voltage Maximum Operational Voltage 380V AC Rated Operational Current (at 50V AC) A (cosø=0.4) Output (contact) Thermal Current 5A Temperature Range Closing elay Opening elay 3 ms 1 ms -0 to +55 C Surge Suppressor evice Relay Interface Completed Part Numbers Product Series Maximum Operational Voltage Function Applicable Control Coil Voltage Range Applicable Contactor Completed Part Number imensions W H 50V AC Resistor capacitor circuit (RC) Up to 40V AC (50/60 Hz) YS1N-9F YS1N-1F YS9Z-TCU500UH YS1N-0F YS1N-5F YS9Z-TCU500UH YS1N-3F YS1N-38F YS9Z-TCU500UH Relay Interface Module YS9Z-TCU YS1N-40F YS1N-50F YS1N-65F YS1N-80F YS1N-100F YS1N-15F YS9Z-TCU500UH YS9Z-TCU500UH H YS1N-150F YS1N-180F YS9Z-TCU500UH YS1N-0F YS1N-300F YS9Z-TCU500UH W TES: Each model is identical in electrical characteristics, mounting plate sizes representing the only difference. CONNECTION IAGRAM AN INTERNAL CIRCUIT OF THE RELAY INTERFACE MOULE b A (+) e c E RY d a MC ( ) f R C A1 PLC (RELAY INTERFACE MOULE) CONTACTOR USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC -31

32 Specifications Mechanical Interlock Blocks Reversing Contactors Contactor Size Mechanical Interlock Block imensions A B C YS1R-9F YS9Z-TMI YS1R-1F YS9Z-TMI YS1R-0F YS9Z-TMI YS1R-5F YS9Z-TMI YS1R-3F YS9Z-TMI YS1R-38F YS9Z-TMI YS1R-40F YS9Z-TMI YS1R-50F YS9Z-TMI YS1R-65F YS9Z-TMI YS1R-80F YS9Z-TMI YS1R-100F YS9Z-TMI YS1R-15F YS9Z-TMI YS1R-150F YS9Z-TMI YS1R-180F YS9Z-TMI YS1R-0F YS9Z-TMI YS1R-300F YS9Z-TMI Note: 1. The mounting holes are the same as theys1 Series.. The above figures are not drawn to scale. Refer to the chart for actual dimensions. 3. YS1N-80F~-300F size contactors require an additional mounting base. Refer to the YS1R-80F through -300F in the dimension chart. B C A Reversing Starters Contactor Size Mechanical Interlock Block imensions A B C YSR-9F YS9Z-TMI YSR-1F YS9Z-TMI YSR-0F YS9Z-TMI YSR-5F YS9Z-TMI YSR-3F YS9Z-TMI YSR-38F YS9Z-TMI YSR-40F YS9Z-TMI YSR-50F YS9Z-TMI YSR-65F YS9Z-TMI YSR-80F YS9Z-TMI YSR-100F YS9Z-TMI YSR-15F YS9Z-TMI YSR-150F YS9Z-TMI YSR-180F YS9Z-TMI YSR-0F YS9Z-TMI YSR-300F YS9Z-TMI Note: 1. The mounting holes are the same as the YS1 Series.. The above figures are not drawn to scale. Refer to the chart for actual dimensions. 3. YS1N-80F through 300F contactors require an additional mounting base. Refer to the YSR-80F~-300F in the dimension chart. B C A -3 USA: (800) 6-IEC or (408) , Canada: (888) 317-IEC