Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: TÜV SÜD Industrie Service GmbH Labor der Industrie Service Westendstraße 199, München Tests in the fields: Material testing, testing of welds and metallographic investigation; optical emission spectrometry on low-alloy and high-alloy steels, aluminium and copper alloys; testing of pipe systems for gas and drinking water installations, scanning electron microscopy, strength testing and measurement of mechanical parameters in technical facilities, on metals and non-metallic materials; Non-destructive testing (RT, UT, ET, AT, MT, PT, VT) and mechanised non-destructive testing (UT) in the metal production and processing industries and in plant engineering and plant construction; manual and mechanical corrosion measurement using ultrasonic Lamb waves on light poles to determine stability; Physical and chemical analysis of materials, components and systems made from plastics and organic materials; highly accelerated environmental testing of plastic materials; Selected physical, physicochemical and chemical analyses of water, sampling of cooling water from water and steam cycles; testing of pipes made from unalloyed steel and testing of prefabricated accessories for roofing within the scope of Regulation (EU) No. 5/2011, setting forth harmonised conditions for the marketing of construction products (Construction Products Regulation) Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standard testing methods listed here with different issue dates. The laboratory maintains a current list of all standards / testing procedures within the flexible scope of accreditation. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/

2 1 Mechanical-Technological Tests 1.1 Tensile Tests DIN EN DIN EN DIN EN DIN EN ISO / B DIN DIN EN ISO Founding - Grey cast irons; Founding - Malleable cast irons; Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature (withdrawn standard) Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO :2009); Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds 1.2 Bend and Pressure Tests DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO Metallic materials - Bend test Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints Destructive tests on welds in metallic materials - Transverse tensile test Destructive tests on welds in metallic materials - Bend tests Destructive tests on welds in metallic materials - Fracture test Period of validity: to Translation - 2/

3 1.3 Charpy Impact Tests DIN EN DIN EN ISO DIN EN ISO Charpy impact test on metallic materials; part 1: test method; (withdrawn norm) Metallic materials - Charpy pendulum impact test - Part 1: Test method Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination 1.4 Pipe Tests DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO Metallic materials - Tube - Flattening test (ISO 8492:2013); Metallic materials - Tube - Drift-expanding test (ISO 8493:1998); Metallic materials - Tube - Flanging test (ISO 8494:2013); Metallic materials - Tube - Ring-expanding test (ISO 8495:2013); Metallic materials - Tube - Ring tensile test (ISO 8496:2013); 1.5 Hardness Tests DIN EN ISO DIN EN ISO DIN EN ISO Metallic materials - Vickers hardness test - Part 1: Test method (HBW2,5/187,5; HBW2,5/62,5 and HBW2,5/31,25) Metallic materials - Brinell hardness test - Part 1: Test method (HV 0,5; HV 1; HV 5; HV 10; HV ) Metallic materials - Rockwell hardness test - Part 1: Test method Period of validity: to Translation - 3/

4 DIN EN ISO DIN DIN EN ISO DIN EN DIN Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints Welding consumables - Testing of welding consumables by means of weld metal specimens - Part 4: Test piece for determining the hardness of surfacing Steels - Determination and verification of the depth of carburized and hardened cases Iron and steel - Determination of the conventional depth of hardening after surface heating; Hardness depth of heat-treated parts; determination of the effective depth of hardening after nitriding 1.6 Testing of Weld and Solder Joints DIN EN DIN DIN EN ISO Brazing - Destructive tests of brazed joints; Testing of soldered joints - Gap soldered joints, shear test, creep shear test Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Selfrestraint tests 2 Metallography and Scanning Electron Microscopy Examinations 2.1 Metallography DIN EN ISO DIN EN ISO 643 With correction Steels - Determination of depth of decarburization Steels - Micrographic determination of the apparent grain size Period of validity: to Translation - 4/

5 DIN EN DIN SEP SEP SEP DIN EN ISO Micrographic examination of the non-metallic inclusion content of steels using standard pictures; Non-destructive testing; impression methods for surface examination (Replica-technique) Microscopic examination of carbide structure in steels by means of diagram series Microscopic test of free cutting steels for solid nonmetallic inclusions in metal by means of strip mosaics Test of the resistance of high-alloy, corrosion-proof materials against intercrystalline corrosion Microstructure of cast irons - Part 1: Graphite classification by visual analysis 2.2 Scanning Electron Microscopy MUC-WMR-A Performance of length measurements and energy-dispersive X- ray microanalysis using a scanning electron microscope (Durchführung von Längenmessungen und röntgenenergiedispersiven Mikroanalysen mittels Rasterelektronenmikroskop) 3 Testing of Pipes for Gas and Drinking Water Installations DIN EN DIN EN DVGW W DVGW GW Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions; Pipe connectors and pipe joints in drinking water installation (without 12.6 and 12.7) Stainless steel pipes for gas and drinking water installations Requirements and tests (Rohre aus nichtrostenden Stählen für Gas- und Trinkwasser- Installation - Anforderungen und Prüfungen) Period of validity: to Translation - 5/

6 4 Optical Emission Spectrometry on Low- and High-Alloy Steels, Aluminium and Nickel Alloys QMA-Nr. MUC-WMR-A DIN EN ISO Optical emission spectrometry (OES) to determine 25 elements in steel and iron materials and nickel-based alloys, 18 elements in copper-based alloys and 17 elements in aluminium -based alloys. Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys 5 Nondestructive Testing 5.1 Radiographic Testing (RT) DIN DIN EN ISO DIN EN ISO DIN EN ISO DIN EN E DIN EN E DIN EN In-service inspections for primary coolant circuit components of light water reactors - Part 7: Radiographic testing Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (here: Point 6) Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors Founding - Radiographic examination Founding - Radiographic testing - Part 1: Film techniques Founding - Radiographic testing - Part 2: Techniques with digital detectors Period of validity: to Translation - 6/

7 5.2 Ultrasonic Testing (UT) DIN DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN DIN EN DIN EN DIN EN DIN EN In-service inspections for primary coolant circuit components of light water reactors - Part 1: Automated ultrasonic testing Non-destructive testing - Ultrasonic testing - General principles (here: point 9) Non-destructive testing - Ultrasonic testing - Transmission technique Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment; Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders Attachment H: ultrasonic testing Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders; Attachment G: ultrasonic testing Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method); Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings; Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings Period of validity: to Translation - 7/

8 DIN EN DIN EN DIN EN DIN EN DIN EN DIN EN DIN EN DIN ISO ISO ISO DIN EN ISO DIN EN ISO Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams Non-destructive testing - Ultrasonic testing of steel bars; Founding - Ultrasonic examination - Part 1: Steel castings for general purposes; Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components; Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings; Non-destructive testing of welded joints in thermoplastics semifinished products - Part 3: Ultrasonic testing; Non-destructive testing - Ultrasonic thickness measurement; Plain bearings - Metallic multilayer plain bearings - Part 1: Nondestructive ultrasonic testing of bond of thickness >= 0,5 mm Steel castings - Ultrasonic examination - Part 1: Steel castings for general purposes Steel castings - Ultrasonic examination -- Part 2: Steel castings for highly stressed components Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012); Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) Period of validity: to Translation - 8/

9 5.3 Magnetic Particle Testing (MT) DIN EN ISO DIN EN DIN EN ISO DIN Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2003); Founding - Magnetic particle testing; Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection; Steel castings - Magnetic particle inspection In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing 5.4 Penetrant Testing (PT) DIN EN ISO DIN EN ISO DIN EN ISO DIN EN DIN EN DIN EN DIN ISO Non-destructive testing - Penetrant testing - Part 1: General principles (ISO :2013, Corrected version ); (here: point 9) Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 C (ISO :2008); Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 C (ISO :2008); Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings Founding - Liquid penetrant testing - Part 2: Investment castings Non-destructive testing of steel forgings - Part 2: Penetrant testing; Plain bearings; metallic multilayer plain bearings; non-destructive penetrant testing; identical with ISO :1992 Period of validity: to Translation - 9/

10 DIN ASTM E In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing Standard Practice for Liquid Penetrant Testing 5.5 Eddy Current Testing (ET) DIN DIN DIN EN ISO DIN EN DIN EN DIN EN ISO DIN EN ISO DKI WP In-service inspections for primary coolant circuit components of light water reactors - Part 6: Eddy current testing of steam generator heating tubes Non-destructive testing; eddy current testing of pipes and tubes; procedure Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015); Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface; Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface; Non-destructive testing - Eddy current testing - General principles (here: point 12) Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitudesensitive eddy current method (ISO 2360:2003); Eddy Current Testing of Round Condenser and Heat Exchanger Tubes of Copper and Wrought Copper Alloys Period of validity: to Translation - 10/

11 DKI WP DKI WP Eddy-current testing of the tightness of rolled, finned tubes made from copper and wrought copper alloys according to EN and VdTÜV material specification 420. Eddy-current testing of oval tubes made from copper and wrought copper alloys. 5.6 Visual Testing (VT) DIN DIN EN ISO DIN EN DIN EN In-service inspections for primary collant circuit components of light water reactors - Part 4: Visual testing Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003); Non-destructive testing - Visual testing - General principles; Non destructive testing of welded joints of thermoplastics semifinished products - Part 1: Visual examination; 5.7 Acoustic Emission Testing DIN EN DIN EN Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources 5.8 General Non Destructive Testing Methods DIN EN ISO DIN EN AD 2000-data sheets HP 5/ Non-destructive testing of welds - General rules for metallic materials (ISO/DIS 17635:2015); Brazing - Non-destructive examination of brazed joints; Manufacture and testing of joints - Non-destructive testing of welded joints Period of validity: to Translation - 11/

12 AD data sheets HP 5/3 Anlage KTA KTA Amendment KTA KTA KTA KTA Amendment Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods Components of the reactor coolant pressure boundary of light water reactors - Part 1: Materials and product forms Attachment B: Execution of manuel ultrasonic testing Attachment C: Execution of surface crack testing with magnetic particle and penetrant testing Components of the Reactor Coolant Pressure Boundary of Light Water Reactors Part 3: ManufactureA Attachment C: Execution of manuel Ultrasonic testing Attachment D: Execution of manuel Ultrasonic tandem testing Attachment E: Execution of surface crack testing with magnetic particle and penetrant testing Components of the reactor coolant pressure boundary of light water reactors - Part 4: Inservice inspections and operational monitoring Reactor pressure vessel internals Chapter 8.9: Requirements for non destructive testing and evaluation of testresults Pressure and activity retaining components of systems outside the primary circuit - Part 1: Materials Attachment D: Execution of manuel ultrasonic testing Attachment E: Execution of surface crack testing with magnetic particle and penetrant testing Pressure and Activity Retaining Components of Systems Outside the Primary Circuit - Part 3: Manufacture Attachment D: Execution of manuel ultrasonic testing Attachment E: Execution of surface crack testing with magnetic particle and penetrant testing Period of validity: to Translation - 12/

13 KTA KTA KTA KTA KTA Amendment KTA DVGW GW CCH Pressure and Activity Retaining Components of Systems Outside the Primary Circuity - Part 4: Inservice Inspections and Operational Monitoring Steel containment vessels - Part 1: Materials Attachment B: Execution of manuel ultrasonic testing Attachment C: Execution of surface crack testing with magnetic particle and penetrant testing Steel reactor safety containment; part 3: manufacture Chapter 9.3 Nondestructive testing Chapter 10.8 Nondestructive testing after pressure test Reactor containments of steel - Part 4: Inservice inspections Inspection, Testing and Operation of Lifting Equipment in Nuclear Power Plants Attachment B: Nondestructive testing Load Attaching Points on Loads in Nuclear Power Plants Attachment B: Nondestructive testing Welding Joints of Steel Pipelines for Gas and Water Supply - Manufacturing, Testing and Evaluation Specification for inspection of steel castings of hydraulic machines 5.9 Manual and Mechanical Corrosion Measurement Using Ultrasonic Lamb Waves on Light Poles and Piping Systems IS-MUC-ZFP-A Performance and recording of corrosion measurements using ultrasonic Lamb waves on light poles and piping systems (in German) Period of validity: to Translation - 13/

14 6 Examination of Plastic Materials and Organic Materials 6.1 Thermic Test at Plastic Materials DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN DIN DIN DIN EN ISO DIN EN ISO DIN EN ISO Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture Plastics - Determination of temperature of deflection under load - Part 1: General test method Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; Thermal analysis (TA) - determination of melting temperatures of crystalline materials by differential thermal analysis Testing of Plastics - Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) Period of validity: to Translation - 14/

15 6.2 Environment Simulation Test at Plastic Materials DIN EN ISO DIN EN ISO ISO 105-A Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating 6.3 Material Testing at Glass Fiber Reinforced Cover Plastic Materials DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO E DIN EN DIN EN ISO DIN EN ISO DIN EN ISO Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Plastics - Determination of compressive properties Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods Fibre-reinforced plastic composites - Determination of flexural properties (only method A) Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals Period of validity: to Translation - 15/

16 DIN Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF- PHA); tests and quality control 6.4 Material Testing of Caoutchouc and Elastomer Materials ISO DIN ISO E DIN ISO E DIN ISO ISO Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures Rubber, vulcanized or thermoplastic - Determination of the effect of liquids 6.5 Other Material Testing of Plastic Materials DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (only number 5.1) Plastics - Determination of flexural properties Plastics - Determination of Charpy impact properties - Part 1: Noninstrumented impact test Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics Period of validity: to Translation - 16/

17 DIN EN ISO BS Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets Hot water bottles manufactured from rubber and PVC Specification (only clauses 4,5, , 6.4.3, , 6.6, 7) 6.6 Testing of Components Made from Elastomer Composite Materials DIN EN DIN EN Closed expansion vessels with built in diaphragm for installation in water; (only number 8) Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners; 6.7 Testing of Piping, Fittings and Sheets Made from Thermoplastics DIN DIN DIN DIN DIN DIN DIN EN ISO DVGW GW 335-A Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing; Polyethylene (PE) pipes - PE 80, PE General quality requirements, testing; Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing Chlorinated polyvinyl chloride (PVC-C) pipes - General quality requirements, testing Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 5: General quality requirements, testing Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE Part 5: General quality requirements, testing Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system Plastic piping systems in gas and water distribution; requirements and testing - Part A 1: PVC-U pipes and fittings made therefrom for water distribution; including corr (in German) Period of validity: to Translation - 17/

18 DVGW GW 335-A DVGW GW 335-A DVGW GW 335-A6 (P) DVGW GW 335-B DVGW W DIN EN DIN EN DIN DIN Plastic piping systems in gas and water distribution; requirements and testing - Part A2: PE 80 and PE 100 pipes; incl. corr and supplement 1, (in German) Plastic piping systems in gas- and water distribution; requirements and testing - Part A 5: PE multilayer pipes with reinforcement (PE stretched) and associated fittings and joints (in German) Plastic piping systems in gas- and water distribution; requirements and testing - Part A 6: PA-U 160 and PA-U 180 pipes and associated fittings and joints (sub-clauses , , , , 3.23, 3.26 only) (in German) Plastic piping systems in gas- and water distribution; requirements and testing - Part B2: PE 80 and PE 100 fittings; incl. supplement 1, (in German) Plastic pipes in drinking water installations (in German) Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings Plastic sheets - Testing (without number 5.11, 5.12, , ) Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Dimensions Period of validity: to Translation - 18/

19 DIN DIN DIN EN DBS DIN EN DIN EN ISO DIN EN ISO Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications (without number 5.4) Prefabricated high density polyethylene (PE-HD) manholes for use in sewerage systems; dimensions and technical delivery conditions Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system Technical delivery specifications plastic pipes and manholes used in track drainage (excl. sub-clauses and 2.3.6) (in German) Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing; Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces 6.8 Testing of Pipes and Fittings Made from Fibre-Reinforced Plastics (FRP) EN DIN EN Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) (basical testing methods, according to S. 2 3, without annex A) Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties Period of validity: to Translation - 19/

20 DIN EN EN DIN EN ISO DIN DIN DIN DIN DIN DIN Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints (basical testing methods, according to S. 2 3, without annex A) Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (basical testing methods, according to S. 2 3, without number 7) Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled; General quality requirements, testing Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing (without number 4.5, 4.10) Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing (without number 4.4, 4.8) Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods (without number 5.3, 5.6) Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test Period of validity: to Translation - 20/

21 DIN DIN DIN ASTM D Reapproved 2009 ASTM D Reapproved 2011 ASTM D Reapproved 2014 ASTM D ASTM D ASTM D Reapproved 2007 ASTM D Reapproved 2007 ASTM D (e1) Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness (without number 5.2) Standard Test Method for Time-to-Failure of Plastic Pipe under Constant Internal Pressure Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing and Fittings Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glassfiber-Reinforced Thermosetting Resin) Pipe and Tube Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings Standard Specification for Filament-Wound "Fiberglass" (Glass- Fiber-Reinforced Thermosetting Resin) Pipe Standard Specification for Centrifugally Cast "Fiberglass" (Glass- Fiber-Reinforced Thermosetting Resin) Pipe Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry Period of validity: to Translation - 21/

22 ASTM D Reapproved 2011 DIN EN DIN EN DVGW VP DIN EN ISO Standard Practice for Determining Dimensions of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure; Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; Pressure pipes, fittings and joints made of glass-reinforced polyester resin (GF-UP) for drinking water lines (Druckrohre - Formstücke und Rohrverbindungen aus glasfaserverstärktem Polyesterharz (UP-GF) für Trinkwasserleitungen) Plastics piping systems - Plastics components - Determination of dimensions 6.9 Testing of Joints between Plastics DIN EN DIN EN DIN EN DVS DVS DVS DVS Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; Testing of welded joints of thermoplastics sheet and pipes - Test methods Requirements Testing of welded joints between panels and pipes made of thermoplastics - Tensile test Testing of welded joints ofthermoplastics plates and tubes - Technological bend test Testing of joints between polymeric materials - Shear and peeling tests Period of validity: to Translation - 22/

23 DVS DVS DVS DVS DVS DVS DVS Welding of thermoplastics - Heated tool welding of pipes, pipeline components and sheets made of PE (only number 7) Weling of thermoplastics - Welding fillers - Marking, requirements and tests Qualification testing of plastics welders - qualification test groups I and II Testing of Plastics Welders - Test Group III - Lining membranes in geotechnical and hydraulic engineering Qualification testing of plastics laminators and adhesive bonders - Laminates as well as laminate and adhesivebonded joints between GFRPs (UP-GF and EP-GF) Qualification testing of plastics adhesive bonders - Pipe joints between PVC-U, PVC-C and ABS with solvent-based adhesives Test of fusions on PE liners - Peeling test 6.10 Testing of Vessels and Components Made from Glass Fiber Reinforced Plastic Materials AD 2000-Merkblatt N DIN EN DIN EN DIN EN E VGB-S DE Pressure vessels in glass fibre reinforced thermosetting plastics (only number 5.2) GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions (basical testing methods, according to table 4) GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance (only annex C) GRP tanks and vessels for use above ground - Part 3: Design and workmanship (basical testing methods, according to number 7.1 till 7.7) Application, design and quality assurance of fibre-reinforced plastics in power-plant engineering (only Annex A testing of materials) (in German) Period of validity: to Translation - 23/

24 6.11 Testing in the Range of Coatings DIN EN ISO DIN EN ISO 4624 E ASTM D DIN EN ISO DIN EN ISO E DIN EN ISO DIN EN ISO E E DIN EN ISO E DIN EN ISO DIN EN ISO Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings Paints and varnishes - Pull-off test for adhesion Standard test methods for measuring adhesion by tape test Paints and varnishes - Cross-cut test Paints and varnishes - Buchholz indentation test Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method Paints and varnishes - Valuation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method Period of validity: to Translation - 24/

25 E DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO ASTM D DIN EN ISO DVGW W DIN EN DIN EN Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blastcleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blastcleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel Paints and varnishes - Determination of film thickness Drinking Water Tanks - Part 5: Materials, Lining and Coating Systems - Requirements and Testing (only number 5) Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum kits; Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets Period of validity: to Translation - 25/

26 7 Selected Physical, Physicochemical and Chemical Analyses of Water 7.1 Sample taking DIN VGB-S DE German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 11: Sampling of waste water (A 11) VGB standard sampling and physicochemical monitoring of water and vapour cycles (in German) 7.2 Physical Processes, Physical and Physicochemical Parameters DIN DIN EN ISO DIN DIN EN German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4) Water quality - Determination of ph German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6) Water quality; determination of electrical conductivity 7.3 Anions DIN QMA-No. MUC-CPW-A German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1) Determination of the concentration of free carbon dioxide in water using titration (Titrimetrische Bestimmung der Konzentration an freiem Kohlenstoffdioxid in Wasser) Period of validity: to Translation - 26/

27 QMA-No. MUC-CPW-A Determination of the sodium sulphite concentration in water using titration (in German) 7.4 Cations DIN QMA-No. MUC-CPW-A German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium, complexometric method (E 3 Determination of the sodium concentration using a sodium monitor (in German) 7.5 Gaseous Components DIN EN ISO DIN EN ISO Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4- phenylenediamine, for routine control purposes Water quality - Determination of dissolved oxygen - Electrochemical probe method 7.6 Summary of Impact and Material Parameters DIN EN ISO DIN EN ISO DIN Water quality - Determination of permanganate index Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 7: Determination of acid and baseneutralizing capacities (H 7) Period of validity: to Translation - 27/

28 7.7 Single Components DIN P German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1) 7.8 Selected Quick Tests for Water Analysis Using Ready-To-Use Reagents Hetero poly blue method (No. 8186) HACH LANGE GmbH Molybdovanate method (No. 8114) HACH LANGE GmbH Silicomolybdate method (No. 8185) HACH LANGE GmbH Ferrozine method (No. 8147) HACH LANGE GmbH June Mercuric thiocyanate method (No. 8113) HACH LANGE GmbH June Aluminon method (No. 8012) HACH LANGE GmbH Determination of the silicic acid concentration in water (Measurement range mg/l) Determination of the orthophosphate and polyphosphate concentrations in water Determination of the silicic acid concentration in water (Measurement range mg/l) Determination of the iron concentration (iron dissolved and total iron) in water Determination of the chloride concentration in water Determination of the aluminium concentration in water Period of validity: to Translation - 28/

29 Porphyrin method (No. 8143) HACH LANGE GmbH Mercaptoacetic acid method (No. 8036) HACH LANGE GmbH Rhodazine D method CHEMetrics Inc Nitrate-50 method No Macherey -Nagel Determination of the copper concentration in water Determination of the molybdate concentration in water Determination of the oxygen concentration in water Determination of the nitrate concentration in water 8 Testing of pipes made from unalloyed steel and testing of prefabricated accessories for roofing within the scope of Regulation (EU) No. 5/2011 setting forth harmonised conditions for the marketing of construction products (Construction Products Regulation) EU Commission Decision System 1) Technical specification 1999/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption 1998/436/EC Roof coverings, skylights, roof windows and ancillary products 3 3 EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions EN 516:2006 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps; EN 517:2006 Prefabricated accessories for roofing - Roof safety hooks 1) System for evaluating and checking performance consistency The requirements for a testing laboratory set forth in Article 43 of the Construction Product Regulation are fulfilled. Period of validity: to Translation - 29/

30 Abbreviations used: AD Arbeitsgemeinschaft Druckbehälter AMS Aerospace Material Specification ASME American Society of Mechanical Engineers ASTM American Society for Testing and Materials DIN Deutsches Institut für Normung e.v. DKI Deutsches Kupferinstitut DVGW Deutscher Verein des Gas- und Wasserfaches DVS Deutscher Verband für Schweißen und verwandte Verfahren e. V. EN Europäische Norm IGC Industrial Gases Committee ISO International Organization for Standardization DIS Draft International Standard KTA Kerntechnischer Ausschuss LN Luftfahrt-Normblatt QMA Hausverfahren der TÜV SÜD Industrie Service GmbH RAL Deutsches Institut für Gütesicherung und Kennzeichnung SEL Stahl-Eisen-Lieferbedingung SEP Stahl-Eisen-Prüfblatt VDG Verein Deutscher Gießereifachleute VDI Verein Deutscher Ingenieure VdTÜV Verband der Technischen Überwachungs-Vereine ZH Zentralstelle der Länder für Unfallverhütung und Arbeitsmedizin Period of validity: to Translation - /