Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: TÜV SÜD Product Service GmbH Ridlerstraße 65, München At Location: TÜV SÜD Product Service GmbH Dudenstr. 28, Mannheim Tests in the fields: testing The laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standard test methods listed here with different issue dates or revision status updates The testing laboratory maintains a current list of all testing within the flexible scope of accreditation This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/6

2 DIN EN VDE : EN 50155: VDE : IEC :2007 EN : VDE : IEC :2007 EN : VDE : IEC :2007 EN : :2000 IEC :1981 EN : VDE : IEC :2009 EN : :1995 IEC :1994 EN : VDE : IEC :2008 EN : : IEC :1987 EN :1993 Railway applications- Electronic equipment used on rolling stock testing- Part 2-1: Tests- Test A: Cold testing- Part 2-2: Tests- Test B: Dry heat testing Part 2-6: Tests- Test Fc: Vibration (sinusoidal) testing- Part 2: Tests; Test Ka: Salt mist testing- Part 2-14: Tests- Test N: Change of temperature testing- Part 2: Tests- Test Q: Sealing testing Part 2-27: Tests- Test Ea and guidance: Shock testing Part 2: Tests- Test Eb and guidance: Bump Cl Cl Cl Cl Cl Cl Cl Cl Cl without Processing Nc Period of validity: to Translation - 2/6

3 30:2006 IEC :2005 EN : VDE : IEC :2008 EN : VDE : IEC :2009 EN : :2006 IEC :2005 EN : :2000 IEC :1982 EN : :1996 IEC :1996 EN : VDE : IEC :2010 EN : :1995 IEC :1987 EN : VDE : IEC :2008 EN : :1996 IEC :1995 EN :1996 testing- Part 2-30: Tests- Test Db: Damp heat, cyclic (12 h+12 h cycle) testing- Part 2-31: Tests- Test Ec: Rough handling shocks, primarily for equipment-type specimens testing- Part 2-38: Tests- Test Z/AD: Composite temperature/humidity cyclic test testing- Part 2-47: Tests- Mounting of specimens for vibration, impact and similar dynamic tests testing- Part 2: Tests; guidance on the application of the tests of IEC to simulate the effects of storage testing- Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution) testing Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests testing Part 2: Tests- Test Ee and guidance: Bounce testing- Part 2-64: Tests- Test Fh: Vibration, broadband random and guidance testing- Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components Period of validity: to Translation - 3/6

4 78:2002 IEC :2001 EN :2001 DIN EN :1996 IEC :1988 EN :1995 DIN EN :1996 IEC :1988 EN :1995 DIN EN VDE : IEC 60529: A1:1999 EN 60529: A1:2000 DIN EN VDE : IEC 61373:2010 EN 61373:2010 DIN EN ISO :2005 ISO :2005 EN ISO :2005 DIN EN ISO 9227:2012 ISO 9227:2012 EN ISO 9227:2012 DIN IEC :1988 IEC :1986 ISO 20653: DIN : DIN 50017: testing- Part 2-78: Tests; test Cab: Damp heat, steady state Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 1: Vibration tests (sinusoidal) Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 2: Shock and bump tests Degrees of protection provided by enclosures (IP Code) Railway applications - Rolling stock equipment - Shock and vibration tests Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres Corrosion tests in artificial atmospheres - Salt spray tests Electrical engineering; equipment reliability testing; preferred test conditions; indoor portable equipment; low degree of simulation Road vehicles; Degrees of protection (IP-Code) Road vehicles; Degrees of protection Condensation Water Conditioned Atmospheres Period of validity: to Translation - 4/6

5 DIN 50021: ISTA 1 Series Fog-tests with different sodium chloride solutions Non-Simulation Integrity Performance Tests ISTA 1A:2012 Packaged-Products weighing 150 lb (68 kg) or less ISTA 1B:2012 Packaged-Products weighing over 150 lg (68 kg) ISTA 1C:2012 ISTA 1D:2012 ISTA 1E:2012 Extended Testing for individual packaged-products weighing 150 lb (68 kg) or less Extended Testing for individual packaged-products weighing over 150 lg (68 kg) Unitized Loads ISTA 1G:2012 Packaged-Products weighing 150 lb (68 kg) or less (Random vibration) ISTA 1H:2012 Packaged-Products weighing over 150 lb (68 kg) (Random vibration) 1A, 1B, 1C, 1D, 1E, 1G, 1H ISTA 2 Series Partial Simulation Performance Tests 2A, 2B, 2C, 2D, 2E, 2F ISTA 2A:2011 Packaged-Products weighing 150 lb (68 kg) or less ISTA 2B:2011 Packaged-Products weighing over 150 lb (68 kg) ISTA 2C:2011 ISTA 2D:2010 ISTA 2E:2010 Furniture Packages Packaged-Products considered flat Packaged-Products considered elongated ISTA 2F:2011 LTL Shipments (NMFC Item 180) without Fork Truck Course (Block 12) und Fixed Displacement (Block 13) ISTA 3 Series General Simulation Performance Tests 3A, 3B, 3F Period of validity: to Translation - 5/6

6 ISTA 3A:2012 ISTA 3B:2012 Packaged-Products for parcel delivery system shipments 70 kg (150 lb) or less (standard, small, flat or elongated) Packaged-Products for less-thantruckload (LTL) shipment ISTA 3F:2012 Packaged-Products for distribution center or retail outlet shipment 100 lb (45 kg) ISTA 7 series Development Tests 7B, 7D ISTA 7B:2010 ISTA 7D:2010 DIN EN : VDE : ABNT NBR 6752:2013 ABNT NBR 8094:1983 ABNT NBR 11003:2009 ASTM D610 Closed reusable transport containers for loads of 150 lb (68 kg) or less Thermal controlled transport packaging for parcel delivery sytem shipment Rotating electrical machines-part 5: Degrees of protection provided by integral design of rotating electrical machines (IP-Code) Brazilian Standard Aluminium alloy wheels for passenger cars, light trucks and SUV s Performance verification testing Brazilian Standard Lined and unlined metallic material Corrosion due to exposition to salt spray Brazilian Standard Paints and vernishes Determination of adhesion Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces without Random Vibration, under low pressure (Blocks 2+8) without Fork lift handling (Block 15) only item Period of validity: to Translation - 6/6