Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
|
|
- Arlene Underwood
- 5 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: TÜV NORD Mobilität GmbH & Co. KG IFM - Institut für Fahrzeugtechnik und Mobilität Adlerstraße 7, Essen Tests in the fields: Testing of motor vehicles and trailers as well as systems, components and independent technical units based on the below-mentioned testing procedures according to the framework directive 2007/46/EC, 2003/37/EC and 2002/24/EC as well as their following framework regulations (EU) 167/2013 and 168/2013 and National test procedures of the StVZO; Testing procedures for confirmation of fatigue strength of wheels according to International regulations and specifications of vehicle manufacturers; Testing procedures of metallic materials; Emission tests of engines/vehicles; Testing procedures for examination of frictional coefficients of brake components; Testing of brake systems for rail vehicles; Testing and services in the field of electrical systems and components; Functional safety according to the following test methods for compliant objects, components, devices and systems in the fields Road vehicles and other vehicles Tractors and machinery for agriculture and forestry Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. The tests listed below can also be performed outside of the fixed facilities of the Laboratories. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/10
2 1. Testing procedures according to key data of KBA 02 Engine/toxic emission Emission of two-, three- and four-wheel vehicles, mopeds, agricultural and forestry tractors, air conditioning systems /220/EEC * 2003/76/EC /24/EC Chapter 5 * 2006/120/EC (Annexes I and II) /25/EC * 2005/13/EC VO (EU) 715/2007 * VO (EU) 2017/1151 (including Regulation (EC) 692/2008) VO (EU) 595/2009 * VO (EU) 2016/1718 (including Regulation (EC)582/2011) UN-R 83 Series07 (SI engine) UN-R 40 Series UN-R 47 Series UN-R 101 Series S UN-R 103 Series Test procedures in the scope of testing for approvals and market surveillance Determination of the absorption coefficient of diesel engines /306/EEC * 2005/21/EC /537/EEC * 97/54/EC UN-R 24 Series03 (Part I and II, without Annex 10) Test procedures in the scope of testing for approvals and market surveillance Emission of diesel engines of two-, three- and four-wheel vehicles, mobile machines and equipment /24/EC chapter 5 * 2006/120/EC (Annex III) /68/EC * 2004/26/EC UN-R 24 Series03 (Part III, without Annex 10) UN-R 49 Series UN-R 83 Series07 (Compression Ignition) UN-R 96 Series Test procedures in the scope of testing for approvals and market surveillance Determination of fuel consumption /1268/EEC * 2004/3/EC UN-R 84 Series Test procedures in the scope of testing for approvals and market surveillance Period of validity: to Translation - 2/10
3 02-05 Determination of engine power /1/EC * 2006/27/EC (Annex II) UN-R 24 Series03 (Annex 10) UN-R 85 Series UN-R 120 Series Test procedures in the scope of testing for approvals and market surveillance Natural and liquid gas systems for the operation of vehicles engines; retrofitting systems UN-R 115 Series00 03 Sound emission Measurement of sound level /157/EEC * 2007/34/EC (Annex I and II) /23/EEC * 2005/11/EC (Annex V) /24/EC Chapter /63/EC (Annex VI) UN-R 51 Series UN-R 41 Series UN-R 59 Series UN-R 117 Series02 (Annex 3) Test procedures in the scope of testing for approvals and market surveillance Audible warning devices /388/EEC * 87/354/EEC /30/EEC UN-R 28 Series Test procedures in the scope of testing for approvals and market surveillance Driver-perceived noise level /76/EC Test procedures in the scope of testing for approvals and market surveillance Period of validity: to Translation - 3/10
4 04 Braking- and steering system Testing of steering systems /311/EEC*1999/7/EC /66/EC UN-R 79 Series Test procedures in the scope of testing for approvals and market surveillance Testing of braking systems /320/EEC * 2002/78/EC (Annex I-VII) /432/EEC * 97/54/EC (Annex I-IV) UN-R 13 Series11 UN-R 13 (Annex 4-11, 14, 16, 17, 19, 20, 22) UN-R 13-H Series01 (Annex 3-5) Test procedures in the scope of testing for approvals and market surveillance Testing of braking system of two- and three wheel vehicles /14/EEC * 2006/27/EC UN-R 78 Series Testing of car systems interacting with braking systems /320/EEC * 2002/78/EC (Annex X and XIV) UN-R 13 ÄS11 (Annex UN-R 13-H ÄS01 (Annex 6) UN-R 13 ÄS11 (Annex 18) UN-R 13-H ÄS01 (Annex 8) UN-R 13-H ÄS01 (Annex 9) UN-R 13 ÄS11 (Annex 21) (including Testing according Regulation (EC) 661/2009 Article 12) Testing of trailers with electrical braking systems /320/EEC * 2002/78/EC (Annex XI) Inertia dynamometer test method for brake linings /320/EEC * 2002/78/EC (Annex XII) UN-R 13 Series11 (Annex 15) UN-R 13-H Series01 (Annex 7) Period of validity: to Translation - 4/10
5 04-08 Brake control of towed vehicles and brake coupling between the tractor and towed vehicles /144/EC (Annex VI) Replacement brake linings, discs and drums /320/EEC * 2002/78/EC (Annex XV) UN-R 90 Series Braking and deviation test with spare wheels/tyres /320/EEC * 2002/78/EC (Annex XIII) 05 Wheels/Tyres Testing of tyres /23/EEC (Annex II) *2005/11/EC /24/EC Chapter 1 (Annex II) *2006/120/EC UN-R 30 Series UN-R 54 Series UN -R 64 Series UN-R 75 Series UN-R 106 Series UN-R 108 Series UN-R 109 Series Wheels and special wheels UN-R 124 Series Test procedures in the scope of testing for approvals and market surveillance Change of tyres /23/EEC * 2005/11/EC (Annex IV) /24/EC Chapter 1 * 2006/27/EC (Annex III) Regulation (EC) 458/2011 (implementing Regulation (EC) 661/2009) Test procedures in the scope of testing for approvals and market surveillance Wheel cover /549/EEC * 94/78/EC /226/EEC (Annex III) Regulation (EC) 1009/2010 (implementing Regulation (EC) 661/2009) Period of validity: to Translation - 5/10
6 2 Testing procedures for confirmation of fatigue strength of wheels according to International regulations and specifications of vehicle manufacturer AK-LH DIN EN ISO DIN EN DIN EN ISO DIN EN ISO ABNT NBR ABNT NBR Tyres - Requirements and Testing (4.22 Material testing on Aluminium wheels; 4.31 Bending test; 4.32 Special test on inner rim edges; 4.33 Retardation test; 4.34 Multiaxial fatigue strength test with the basis program AKRcycle; 4.41 Impact test; 4.42 Radial stroke test) Metallic materials - Tensile testing - Part 1: Method of test at room temperature (Method B) Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature (withdrawn standard) Metallic materials - Brinell hardness test - Part 1: Test method (Method HBW 2,5/62,5) (withdrawn standard) Metallic materials - Brinell hardness test - Part 1: Test method (Method HBW 2,5/62,5) Automobile wheels - Resistance and durability test Rodas para automóveis - Verificação da durabilidade e resistência Aluminum alloy wheels for passenger cars, light trucks and SUVs - Performance verification testing Rodas de liga de alumínio para automóveis comerciais leves e utilitários esportivos - Ensaios de verificação de desempenho 3 Emission tests of engines/vehicles SN Internal Combustion Engines - Exhaust Gas After-treatment - Particle Filter Systems - Testing Method in connection with: LRV Swiss Clean Air Ordinance - Annex 4, Number 3: Requirements on construction vehicles and their particle filter systems Period of validity: to Translation - 6/10
7 4 Testing of brake systems 4.1 Testing procedures for examination of frictional coefficients of brake components ISO ISO ISO Road vehicles - Brake lining friction materials - Standard performance procedure for commercial vehicles with air brakes Road vehicles - Brake lining friction materials - Standard wear test procedure for commercial vehicles with air brakes Road vehicles - Brake lining friction materials - Friction behavior assessment for automotive brake systems 5 Functional safety The following in-house test procedure is used for tests in the functional safety areas listed on page 1: PA_FS_Assessment_ Test procedure for performing functional safety / safety assessments of machines in accordance with ISO 25119: 2010, EN 16590: 2014, ISO 26262: 2011, EN ISO : 2015, EN ISO : 2012 The aforementioned test method applies to the following components, devices and equipment: For safety-related electrical / electronic / programmable electronic systems in the field of road vehicles and other vehicles as well as tractors and machines for agriculture and forestry The tests are based on the following basic standards of functional safety: Basic standards Functional safety ISO ISO ISO Road vehicles Functional Safety - Part 1 Vocabulary Road vehicles Functional Safety - Part 2 Management of functional safety Road vehicles Functional Safety - Part 3 Concept phase Period of validity: to Translation - 7/10
8 ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO ISO DIN EN DIN EN Road vehicles Functional Safety - Part 4 Product development at the system level Road vehicles Functional Safety - Part 5 Product development at the hardware level Road vehicles Functional Safety - Part 6 Product development at the software level Road vehicles Functional Safety - Part 7 Production and operation Road vehicles Functional Safety - Part 8 Supporting processes Road vehicles Functional Safety - Part 9 Automotive Safety Integrity Level (ASIL)-oriented and safetyoriented analyses Road vehicles Functional Safety - Part 10 Guideline on ISO parts of control systems - Part 1: General principles for design and development parts of control systems - Part 2: Concept phase parts of control systems - Part 3: Series development, hardware and software parts of control systems - Part 4: Production, operation, modification and supporting processes parts of control systems - Part 1: General principles for design and development parts of control systems - Part 2: Concept phase Period of validity: to Translation - 8/10
9 DIN EN DIN EN DIN EN ISO DIN EN ISO parts of control systems - Part 3: Series development, hardware and software parts of control systems - Part 4: Production, operation, modification and supporting processes Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design Safety of machinery - Safety-related parts of control systems - Part 2: Validation 6 Testing and services in the field of electrical systems and components The following in-house test procedure is used for tests in the areas of electrical systems and components: PA_AE_ECU_Test_v Test procedure for test execution according to OPEN Alliance Automotive Ethernet Test Specification The aforementioned test method applies to the following components, devices and equipment: Systems and components with one or more Automotive Ethernet ports The tests are based on the following basic standard: basic standard TC8 ECU Test, V OPEN Alliance Automotive Ethernet ECU Test Specification Period of validity: to Translation - 9/10
10 Abbreviations used: ABNT AEF AK ÄS DIN UN-R EG EN EU EWG ISO KBA LRV SN StVZO VO ECU Technischer Standard in Brasilien, Associacao Brasileira de Normas Tecnicas Agricultural Industry Electronics Foundation Arbeitskreis Änderungsstand Deutsches Institut für Normung e.v. Regelungen durch Wirtschaftskommission für Europa der Vereinten Nationen (Economic Commission for Europe) Europäische Gemeinschaft Europäische Norm Europäische Union Europäische Wirtschaftsgemeinschaft Internationale Organisation für Normung Kraftfahrtbundesamt Luftreinhalteverordnung Schweizer Norm Straßenverkehrszulassungsordnung Verordnung Electronic control unit Period of validity: to Translation - 10/10
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18137-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 19.03.2018 to 18.03.2023 Holder of certificate: Continental
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationPeriod of validity: to Date of issue:
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.03.2017 to 02.02.2020 Holder of certificate: TÜV
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3
Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18192-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 15.11.2017 to 14.11.2022 Holder of certificate: ITAP
More informationTechnical Report. No. EB138.0 on a measurement and simulation device to check compliance with the provisions of the ECE Regulation No.
Technical Report No. EB138.0 on a measurement and simulation device to check compliance with the provisions of the ECE Regulation No. 13 This Technical Report serves as a verification of the conformity
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationKBA Kraftfahrt-Bundesamt
Kraftfahrt-Bundesamt (Federal Motor Transport Authority) Your central provider of services and information concerning vehicles and their users Vehicle Technology - Information Sheet on Approvals for New
More informationTest procedure/method identification
Testing laboratory location: 1 NOV 2 UHE Úhelnice 41, 294 06 Úhelnice 3 BEZ Uno Technology Park, Hala H1a, Bezděčín č.p. 108, 293 01 Mladá Bolesla 4 VTP Přílepská 1920, 252 63 Roztoky u Prahy 5 KTG Bílý
More informationThe new EU type-approval framework for motor vehicles
AC.nl The new EU type-approval framework for motor vehicles Commission Proposal Explained 24 May 2016 Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Automotive and Mobility
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18398-02-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Period of validity: 26.02.2018
More informationT E S T R E P O R T N o. E B E
T E S T R E P O R T N o. E B 1 8 1. 2 E on the regularity of the braking system of a vehicle in accordance with the regulations of the EC Directive 71/320/EEC or the UN-ECE Regulation no. 13 when installing
More informationCertificate of Appointment. Eurofins Product Service GmbH
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationCOMMISSION REGULATION (EU) No /.. of XXX
EUROPEAN COMMISSION Brussels, XXX B4 1667206 [ ](2014) XXX DRAFT 30.04.2014 COMMISSION REGULATION (EU) No /.. of XXX supplementing Regulation (EC) No 661/2009 of the European Parliament and of the Council
More informationCertificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13412-01-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Indefinite since: 10.12.2018
More informationTechnical Report. No. KO250.3E. on the TRAILER CONTROL MODULE
Technical Report No. KO250.3E on the TRAILER CONTROL MODULE Mobilität TÜV NORD Mobilität GmbH & Co. KG IFM Institute for Vehicle Technology and Mobility Adlerstraße 7 45307 Essen Tel.: +49 (0)201 825-4120
More informationIFM Institut für Fahrzeugtechnik und Mobilität. VO (EU) no. 2015/208 Anx. XIV Requirements for the exterior and for accessories of the vehicle
IFM Institut für Fahrzeugtechnik und Mobilität VO (EU) no. 2015/208 Anx. XIV Requirements for the exterior and for accessories of the vehicle 1 VO (EU) Nr. 2015/208 Anh. XIV Overview Scope Requirements
More informationCOMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX xxx [ ](2016) XXX draft COMMISSION REGULATION (EU) / of XXX correcting Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
More informationCOMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX implementing Regulation (EU) No 595/2009 of the European Parliament and of the Council as regards the determination
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
More informationVehicle Testing& Homologation
Section 2 Vehicle Testing& Homologation (Automotive Type Approval) At first, you need to think What is your product? (vehicle? Lamp? Audio?) Where is the target market? (Europe? USA? - - -) How is your
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-11-22 to 2022-11-21 Date of issue: 2017-11-22
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
More informationAccreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory
Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche
More informationISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems
INTERNATIONAL STANDARD ISO 26867 First edition 2009-07-01 Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems Véhicules routiers Matériaux de friction
More informationTechnical Guidelines for Power Generating Units and Systems
Technical Guidelines for Power Generating Units and Systems PART 8 (TG 8) Certification of the Electrical Characteristics of Power Generating Units and Systems in Low-, Medium-, Highand Extra-High Voltage
More informationCertificate: TNU112UML0348/ Test report: 112UML0348 / of 14 January 2013
Test report: 112UML0348 / 8000638271 of 14 January 2013 First certification: 29 July 2011 (first certification) Validity ends: 28 July 2016 Publication in the Federal Gazette: BAnz AT 05 March 2013 B10
More informationOfficial Journal of the European Union. (Non-legislative acts) REGULATIONS
10.1.2019 L 8 I/1 II (Non-legislative acts) REGULATIONS REGULATION (EU) 2019/26 OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 8 January 2019 complementing Union type-approval legislation with regard to
More informationEU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL
This document contains an EU proposal for a legal text on an annex on motor vehicles and equipment and parts thereof to the Trade in Goods chapter in the Trade Part of a possible modernised EU-Mexico Association
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationCOMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION REGULATION (EU) / of XXX amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards
More informationOfficial Journal of the European Union
L 140/8 COMMISSION DELEGATED REGULATION (EU) 2018/829 of 15 February 2018 amending and correcting Delegated Regulation (EU) 2015/208 supplementing Regulation (EU) No 167/2013 of the European Parliament
More informationFirst experiences with the introduction of a new PTI directive in Germany
PLENARY SESSION FOUR Presentation 2 First experiences with the introduction of a new PTI directive in Germany Gerd Neumann DEKKRA Automobil GmbH Germany First experiences with the introduction of a new
More informationANNEXES. to the COMMISSION DELEGATED REGULATION
EUROPEAN COMMISSION Brussels, 15.2.2018 C(2018) 863 final ANNEXES 1 to 2 ANNEXES to the COMMISSION DELEGATED REGULATION amending and correcting Delegated Regulation (EU) 2015/208 supplementing Regulation
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.02.2018 to 12.02.2023 Holder of certificate: DMT
More informationCOUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561
COUNCIL OF THE EUROPEAN UNION Brussels, 11 December 2006 Interinstitutional File: 2003/ 0153(COD) 9911/3/06 REV 3 ADD 1 T 84 CODEC 561 STATEMT OF THE COUNCIL'S REASONS Subject : Common Position adopted
More informationECOMP.3.A EUROPEAN UNION. Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 ENT 229 MI 914 ENV 837 AGRI 596 PREP-BXT 58 CODEC 2164
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 T 229 MI 914 V 837 AGRI 596 PREP-BXT 58 CODEC 2164 LEGISLATIVE ACTS AND OTHER INSTRUMTS
More informationAPPLICATION FOR APPROVAL OF A TYPE OF PNEUMATIC TYRE ACCORDING TO ECE REGULATION No. 30, 02 SERIES OF AMENDMENTS
APPLICATION FOR APPROVAL OF A TYPE OF PNEUMATIC TYRE ACCORDING TO ECE REGULATION No. 30, 02 SERIES OF AMENDMENTS ------ 1. Manufacturer's name or trade mark on the tyre : GOODRIDE;WESTLAKE;TRAZANO;YARTU;CHAOYANG;
More informationTABLE OF CONTENTS. Table of contents. Page ABSTRACT ACKNOWLEDGEMENTS TABLE OF TABLES TABLE OF FIGURES
Table of contents TABLE OF CONTENTS Page ABSTRACT ACKNOWLEDGEMENTS TABLE OF CONTENTS TABLE OF TABLES TABLE OF FIGURES INTRODUCTION I.1. Motivations I.2. Objectives I.3. Contents and structure I.4. Contributions
More informationCOMMISSION REGULATION (EU)
30.11.2011 Official Journal of the European Union L 317/17 COMMISSION REGULATION (EU) No 1235/2011 of 29 November 2011 amending Regulation (EC) No 1222/2009 of the European Parliament and of the Council
More informationThis document is meant purely as a documentation tool and the institutions do not assume any liability for its contents
1970L0156 EN 12.07.2007 025.001 1 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B COUNCIL DIRECTIVE of 6 February 1970 on the approximation
More informationCEMA Representing the European Agricultural Machinery Industry. Dr. Heribert Reiter CEMA - Technical Board Chairman
CEMA Representing the European Agricultural Machinery Industry Dr. Heribert Reiter CEMA - Technical Board Chairman CEMA The European Association representing the Farm Machinery Industry in Europe for more
More informationPrice List 2013 In-House Repairs and Calibration
In-House Repairs and Calibration Contents Page 2: Services Page 3: Repair and Certification Packages for Accumulators Page 4: Repair packages for Compact Hydraulics Power Units Page 5: Repair and Inspection
More informationRSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC
RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references 18 January 2019 RSB reference code: RSB-DOC-10-001 Published by the Roundtable on Sustainable Biomaterials. This publication
More informationRSB List of Documents and references
Type of document: Reference Document Date: 20 March 2017 RSB List of Documents and references RSB reference code: [RSB-DOC-10-001] Published by the Roundtable on Sustainable Biomaterials. This publication
More informationAnnex to the Accreditation Certificate D IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D IS 14153 02 01 according to DIN EN ISO/IEC 17020:2012 Period of validity: 16.04.2015 to 14.04.2020 Date of issue: 16.04.2015
More informationCertificate: / 22 March 2013
Test report: 936/21215448/A of 11 October 2012 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 05 March 2013 B10, chapter II, No. 2.4 Approved application The tested
More informationE/ECE/324/Rev.2/Add.105/Rev.2/Amend.5 E/ECE/TRANS/505/Rev.2/Add.105/Rev.2/Amend.5
E/ECE/324/Rev.2/Add.105/Rev.2/Amend.5 E/ECE/TRANS/505/Rev.2/Add.105/Rev.2/Amend.5 27 April 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14522:2005 Gaaside ja aurude isesüttimistemperatuuri määramine Determination of the auto ignition temperature of gases and vapours EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationCertificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationContents INTRODUCTION...
INTRODUCTION... xiii CHAPTER 1. FROM THE SYSTEM TO THE SOFTWARE... 1 1.1. Introduction... 1 1.2. Command/control system... 2 1.3. System... 6 1.4. Software application... 8 1.4.1. What is software?...
More informationAssessing and Enforcing Clean Air Regulations in Germany
Assessing and Enforcing Clean Air Regulations in Germany Dr. habil. Uwe Lahl Head of Directorate-General Immission Control and Health Transatlantic Cooperation for Clean Air Brussels Workshop 5-6 February
More informationTesting of particulate emissions from positive ignition vehicles with direct fuel injection system. Technical Report
Testing of particulate emissions from positive ignition vehicles with direct fuel injection system -09-26 by Felix Köhler Institut für Fahrzeugtechnik und Mobilität Antrieb/Emissionen PKW/Kraftrad On behalf
More informationTEST REQUIREMENTS FOR TRUCK STEEL WHEELS SPECIFICATION D'ESSAI DES ROUES EN ACIER DE CAMIONS PRÜFVERFAHREN FÜR NUTZFAHRZEUG - STAHL - RÄDER
EUWA STANDARDS May 2006 TEST REQUIREMENTS FOR TRUCK STEEL WHEELS E S 3.11 SPECIFICATION D'ESSAI DES ROUES EN ACIER DE CAMIONS PRÜFVERFAHREN FÜR NUTZFAHRZEUG - STAHL - RÄDER Page 1/8 1 - SCOPE This Euwa
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller
More informationDeutsche Akkreditierungsstelle GmbH
(( DAk~~"h' Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) TO A COMPONENT TYPE- APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE
More informationAccreditation. a'1" ul. ( oar.hl,.n" Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n" r,nn" Head of Division
( oar.hl,.n" Akkreditieru ngsstel le Deutsche Akkreditieru ngsstelle G m bh Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStellecBV Signatory the
More informationANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF. Article 1. Definitions
ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF Article 1 Definitions 1. For the purpose of this Annex, the following definitions apply: (a) WP.29 means the World Forum for Harmonisation of Vehicle
More informationRegulation No Uniform provisions concerning the approval of replacement pollution control devices for power-driven vehicles
Transmitted by the expert from Germany Informal document No. GRPE-68-18 68th GRPE, 7-10 January 2014, agenda item 3(c) Regulation No. 103 - Uniform provisions concerning the approval of replacement pollution
More informationSound-absorbing spacer Sorp10
Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationCOMMISSION REGULATION (EU)
10.11.2010 Official Journal of the European Union L 292/21 COMMISSION REGULATION (EU) No 1009/2010 of 9 November 2010 concerning type-approval requirements for wheel guards of certain motor vehicles and
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 12.2.2018 C(2018) 721 final COMMISSION DELEGATED REGULATION (EU) /... of 12.2.2018 supplementing Regulation (EU) No 167/2013 of the European Parliament and of the Council
More informationInspection field Inspection type and scope Inspection procedure. New and operated equipment according to ADR/RID/IMDG/CSC
Locations: 1 Management 2 Workplace Praha 3 Workplace Plzeň Zikmunda Wintra 21, 320 16 Plzeň 4 Workplace Ústí nad Labem Malátova 14, 400 11 Ústí nad Labem 5 Workplace Brno třída Kpt. Jaroše 25, 602 00
More informationSERVICES SafE e-mobility for SuRE! CoNSultaNCy testing HomoloGatIoN CERtIfICatIoN
SERVICES Safe e-mobility for sure! CONSULTANCY TESTING HOMOLOGATION CERTIFICATION With 64,000 employees worldwide the SGS Group is the leader in the fields of testing, verification and certification. Founded
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Eastfield Peterborough Cambridgeshire PE1 5NA United Kingdom Contact: Mr Tom Simpson Tel: +44 (0)1733 583034 Fax: +44 (0)1733 582240 E-Mail: simpson_tom@perkins.com Website: www.perkins.com Testing performed
More informationRe: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT , ACT & AT
October 17, 2017 VIA EMAIL Link Engineering Company Jim Villella 401 Southfield Road Dearborn, MI 48120 Re: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT-1997.01, ACT-1997.02
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRPE/2018/12 Distr.: General 26 March 2018 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationCertificate: / 22 March 2013
Test report: 936/21217807/A of 16 August 2012 Initial certification: 05 March 2013 Date of expiry: 04 March 2018 Publication: BAnz AT 05 March 2013 B10, chapter IV, No. 1.1 Approved application The certified
More informationCertificate: _01 / 29 April 2014
Test report: 936/21219344/B of 01 October 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 01 April 2014 B12, chapter II, No. 2.1 Approved application The tested
More informationImplementation procedure for certification and continued airworthiness of Beriev Be-200E and Be-200ES-E
1. Scope 1.1 The general process is described in the implementation procedure for design approvals of aircraft, engine and propeller from CIS and in the implementation procedure for design approvals of
More informationTopic: Certification for Automotive Industry
Topic: Certification for Automotive Industry IFM Institute for Vehicle Technology and Mobility From the idea to production everything from one single source Detailed technical examinations and consultancy
More informationTYPE-CERTIFICATE DATA SHEET
TYPE-CERTIFICATE DATA SHEET No. E.139 for Engine ASTAZOU II series engines Type Certificate Holder 64510 Bordes France For Models: ASTAZOU II A ASTAZOU II A2 TE.CERT.00052-001 European Aviation Safety
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12312-11:2005 Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers Aircraft ground support equipment - Specific requirements
More informationAUTOMOTIVE RESEARCH ASSOCIATION OF INDIA (ARAI) 11/22/13 1
AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA (ARAI) 11/22/13 1 AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA (ARAI) 11/22/13 2 ARAI Overview Establishment : 1966 Location Manpower : 540 + Facilities : 10 divisions
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRRF/2014/24 Distr.: General 4 July 2014 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationElectronic Function & Safety Assessment Test Report
Electronic Function & Safety Assessment Test Report Mobilität Approval Report No: EB 124.4E TÜV NORD Mobilität GmbH & Co. KG IFM Institute for Vehicle Technology and Mobility Adlerstraße 7 45307 Essen
More informationPrinciple Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK
-GB-2017-01: Defining the requirements for a GS mark approval Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act about
More informationDEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten
More informationVOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014)
FEDERAL CHAMBER OF AUTOMOTIVE INDUSTRIES VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014) This code is prepared under the direction of the FCAl Board,
More informationCERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19 July Köln, 17 August 2012
:~ ~~~~~============~----------------------~ Umwelt Bundes Amt @ For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035014 Certified
More informationSeite 1 von 4 Search Result ( 1-50 ) Documents found: 59 Search criteria Search scope: Stage code: 60.60 Current stage only Date stage reached: Last year Committee: TC 22 Refine your query and search again
More information