AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA (ARAI) 11/22/13 1
|
|
|
- Brianne Horn
- 5 years ago
- Views:
Transcription
1 AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA (ARAI) 11/22/13 1
2 AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA (ARAI) 11/22/13 2
3
4 ARAI Overview Establishment : 1966 Location Manpower : Facilities : 10 divisions : Pune, INDIA (150 km South-east of Mumbai) Engine Design, Emissions, Safety & Homologation, Passive Safety, Vehicle Evaluation, Automotive Electronics, NVH, Structural Dynamics, Materials, Calibration, Post Graduate Academy Accreditations : ISO 9001, 14001, OHSAS & NABL
5 R&D What does ARAI do? Sponsored R&D work for the Automotive and Component industry Self funded R&D Projects in futuristic areas Government funded R&D Projects in areas of common interest to the Auto Industry Homologation for OEMs and Component Manufacturers As per Indian national CMVR requirements Export homologation as per ECE in association with TUV, VCA
6 R&D Activities Engines & Transmission Structural Dynamics NVH CAE Automotive electronics Automotive Materials
7 Core R&D Areas : Engine Development Concept design & detailed engineering Computational simulation Combustion optimization, port development Emission reduction to meet Euro, EPA and Indian norms Mechanical design of components, dynamic analysis of power train & valve train system Conversion of diesel & gasoline engines to CNG & LPG fuels Feasibility study Durability testing
8 Source identification & reduction of noise of vehicles, systems & components Torsional vibration analysis of engine & power train Acoustic material, characterization Design optimization of structures using static, thermal, dynamic and fatigue analysis techniques & experimental validation techniques Simulation & analysis of structures using multi-body dynamics Simulation of vehicle crash & evaluating crashworthiness including occupant safety Core R&D Areas : NVH & CAE End-to-end solutions using multi-attributes optimization
9 Core R&D Areas : Structural Dynamics Fatigue / durability testing of automobile components / aggregates and vehicles Accelerated durability test using four poster and multi-axis simulation Experimental stress analysis and service load data acquisition, spectral and fatigue analysis of on & off road vehicles Material Characterization for Fatigue Properties Guiding principles Compressing vehicle development cycle Bringing road to the laboratory
10 Core R&D Areas : Automotive Electronics EMI / EMC evaluation of automotive electronic components and systems Development of test equipment, chassis dynamometer controller, drivers aid, exhaust gas sample handling system etc.
11 Core R&D Areas : Automotive Materials Chemical analysis of materials Testing of fuels / oils / fluids / engine coolant Vehicle exhaust / air quality analysis Evaluation of physical, mechanical, electrical and thermal properties of materials Metallurgical failure analysis
12 Centres of Excellence ARAI has been identified under NATRiP for Centres of Excellence ( CoE) in the following areas: Powertrain Fatigue Materials
13 Homologation & Testing Emission Certification Safety Vehicle Evaluation
14 Full Vehicle testing and approval 2 wheelers/ 3 wheelers Passenger cars Commercial vehicles/ buses Agricultural Tractors / Construction Equipment Battery operated Vehicles CNG/ LPG Retrofitment Vehicles Diesel/ Petrol/ CNG/ LPG engines for emission certification Diesel/ Petrol Gen-sets for emission and noise certification PUC equipment Safety Components ARAI Certification Capabilities In India, major chunk of automotive homologation activities are carried out by ARAI
15 Homologation Services : Emission Emission testing of 2/3 wheelers, passenger cars, LCV & HCV Engine Certification for commercial vehicles, tractors, construction equipment and genset. Evaporative emission measurement in SHED facility Particulate Matter (PM) size measurement After-treatment device evaluation Mileage accumulation for emission performance deterioration determination Special projects like ambient air quality, emission inventory, source apportionment studies etc.
16 Homologation Services : Safety Full frontal crash Air bag deployment Side door intrusion Head restraint impact Helmet impact Safety glass impact Steering impact Mirrors Lighting & signaling devices Wind screen / wiper systems Automotive bulbs Speed limiting devices Wheel rim Horns CNG / LPG components Brake hoses
17 Homologation Services : Safety Safety belts and their anchorages Seats and their anchorages Interior fittings Rear and lateral under run protection devices Occupant survival space Strength of superstructure Front and rear bumpers Bus body
18 Homologation Services : Vehicle Evaluation Test and certification of all types of motor vehicles, as well as Construction Equipment Vehicles as per Indian Standards. Homologation of vehicles for export as per International Standards viz. EEC/ECE/ADR, etc. Validation / Endurance tests under Indian road, load and climatic conditions Performance evaluation of all types of vehicles with respect to parameters like brakes / ABS, max. speed, Pass-by-Noise, fuel consumption, gradeability, etc.
19 Some Esteemed Clients
20 AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA (ARAI) Survey No 102, Vetal Hill, Off Paud Road, Kothrud, PUNE (India) Tel : , Fax : , director@araiindia.com, Website:
ARAI - Center of Excellence for Electric Mobility. 2. International Transportation Electrification Conference (ITEC) India 2017
April - June 2017 1. ARAI - Center of Excellence for Electric Mobility 2. International Transportation Electrification Conference (ITEC) India 2017 ARAI - Center of Excellence for Electric Mobility In
OVERVIEW OF VEHICLE SAFETY SCENARIO IN INDIA
OVERVIEW OF VEHICLE SAFETY SCENARIO IN INDIA 3 rd AAI Summit, Vehicle Safety Session IMPACT Bangkok (Thailand) 3 rd December 2014 Presentation by Anand Deshpande Deputy Director, ARAI (India) ARAI Overview
National Automotive Testing Research & Development Infrastructure Project (Department of Heavy Industries, Government of India)
National Automotive Testing Research & Development Infrastructure Project (Department of Heavy Industries, Government of India) NATRIP is the most significant initiative in Automotive Sector by Govt. of
Vehicle Testing& Homologation
Section 2 Vehicle Testing& Homologation (Automotive Type Approval) At first, you need to think What is your product? (vehicle? Lamp? Audio?) Where is the target market? (Europe? USA? - - -) How is your
E-mobility Indian Roadmap Perspective. A B KOMAWAR The Automotive Research Association of India
E-mobility Indian Roadmap Perspective A B KOMAWAR The Automotive Research Association of India 1 Presentation Outline INDEX About ARAI Indian Automotive Industry & EV Driving forces Air quality, urbanisation
Advanced Diesel Combustion Concept: PCCI - A Step Towards Meeting BS VI Emission Regulations
October - November 2015 1. Advanced Diesel Combustion Concept: PCCI - A Step Towards Meeting BS VI Emission Regulations 2. ARAI offers Indigenously Developed Downsized 3 Cylinder High Power Density CRDI
Sr. No. AIS No.` and its Amendment/s. Title
LIST OF PUBLISHED AUTOMOTIVE INDUSTRY STANDARDS (Updated on March 22, 2019) AISC standards are available on this website only for reference. AISC Secretariat at ARAI reserves copy right for reproduction/
LIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 16 th December Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on Amd. 2 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 Automotive Vehicles - Rear - View Mirrors Specification
LIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 29 th February Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 4. AIS-002 Automotive Vehicles - Rear - View Mirrors Specification
WELCOME Work Shop on Heavy Duty Fuel Efficiency Regulations. PCRA An Integrated Energy Solution Provider 1
WELCOME Work Shop on Heavy Duty Fuel Efficiency Regulations PCRA An Integrated Energy Solution Provider 1 Outline 1. About PCRA 2. Impact of Growing Economy in India 3. Why FE Norms for Heavy Duty Vehicles
VEHICLE AND ENGINE TESTING SERVICES FOR RESEARCH, DEVELOPMENT AND CERTIFICATION
VEHICLE AND ENGINE TESTING SERVICES FOR RESEARCH, DEVELOPMENT AND CERTIFICATION VEHICLE TESTING SGS Environmental Testing Corporation is equipped with a comprehensive array of laboratories serving the
M & N Category Vehicle with GVW< 3.5 tons : BS IV
M & N Category Vehicle with GVW< 3.5 tons : BS IV 39 Emission Standards for Passenger Cars & Light Commercial Vehicles ( BS IV ) Scope: M and N1 class I, II & III Type I Te : Exhau emissions (MIDC) Type
Centre of Excellence for E-mobility
April - June 2018 1. Centre of Excellence for E-mobility 2. Calibration of EMI/EMC Testing related Instruments under NABL 3. Development of Aluminium Superstructure City Bus A Step towards Greener Environment
Pass-by noise, from the Real to the Simulated. The Analysis and Development for the ECE Certification MOTORCYCLES
CSI S.p.A. - CERTIFICATION of SAFETY INSTITUTE Pass-by noise, from the Real to the Simulated. The Analysis and Development for the ECE Certification www.csi-spa.com spa.com MOTORCYCLES Ing. Francesco Ballabio
Technology for Safe and Lightweight Automobiles
AUTOMOTIVE Plastics Application Technology for Safe and Lightweight Automobiles Sudhakar R. Marur Table of Contents Preface...xv Chapter 1 Introduction to Plastics Application Technology... 1 1.1 Introduction...1
Landi Renzo experience with Dual Fuel systems. GFV Workshop. Bruxelles, 13/12/2012
Landi Renzo experience with Dual Fuel systems GFV Workshop Bruxelles, Landi Renzo S.p.A. www.landi.it Agenda History of Diesel Dual Fuel in Landi Renzo Integrated Technical Approach Components Layouts
CNG Kit For Four Wheeler
CNG Kit For Four Wheeler Gasoline Fuel Systems India provides world class CNG kit LOVATO GAS S.p.A., Italy is manufacturing alternative fuel equipments since 1958 which are exported to 90 countries worldwide
Summary briefing on four major new mass-reduction assessment for light-duty vehicles
Summary briefing on four major new mass-reduction assessment for light-duty vehicles In 2010-2012, in the development of US passenger vehicle standards for model years 2017-2025, there were many questions
Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track
Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track These sessions are related to Body Engineering, Fire Safety, Human Factors, Noise and Vibration, Occupant Protection, Steering
Virtual Durability Simulation for Chassis of Commercial vehicle
Virtual Durability Simulation for Chassis of Commercial vehicle Mahendra A Petale M E (Mechanical Engineering) G S Moze College of Engineering Balewadi Pune -4111025 Prof. Manoj J Sature Asst. Professor
Presentation by. 2 nd AAI Summit, Motorcycle Safety Session Denpasar, Bali, Indonesia 25 th November 2013
Shrikant R. Marathe Director The Automotive Research Association of India, Pune, India 2 nd AAI Summit, Motorcycle Safety Session Denpasar, Bali, Indonesia 25 th November 2013 Presentation by Neelkanth
ISO INTERNATIONAL STANDARD. Wheelchair seating Part 4: Seating systems for use in motor vehicles
INTERNATIONAL STANDARD ISO 16840-4 First edition 2009-03-15 Wheelchair seating Part 4: Seating systems for use in motor vehicles Sièges de fauteuils roulants Partie 4: Systèmes d'assise dans les véhicules
Certificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
Automotive CNG/LPG Vehicles Test Method to Evaluate the Range
AIS-055 AUTOMOTIVE INDUSTRY STANDARD Automotive CNG/LPG Vehicles Test Method to Evaluate the Range PRINTED BY: THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 412 004 ON BEHALF OF : AUTOMOTIVE
SPECIFICATION OF PARTS, COMPONENTS OR ASSEMBLIES AND RELEVANT STANDARDS FOR MANUFACTURE OF VEHICLES 1
SPECIFICATION OF PARTS, COMPONENTS OR ASSEMBLIES AND RELEVANT STANDARDS FOR MANUFACTURE OF VEHICLES 1 TABLE Sl. Parts/Components/Assemblies s Date of No. Commencement/ validity (1) (2) (3) (4) 2 [1. Automobile
Certificate of Appointment. Eurofins Product Service GmbH
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
GCC Standardization Organization (GSO) List of GSO Technical Regulations for Motor Vehicles. (2020 Model Year)
GCC Standardization Organization () Conformity Assessment Department List of s for Motor Vehicles (2020 Model ) MY2020-D1 Page 1 of 9 34 35 36 37 38 39 40 41 42 48 51 52 53 96 97 98 99 135 136 2011 2015
Steering Module Test Simulator SMTS
Steering Module Test Simulator Overview The Steering Module Test Simulator () from MB Dynamics is a non-hydraulic turnkey lab test system, offering accurate, reliable and repeatable in-laboratory simulations
Fuel Efficiency Norms for Heavy Duty Vehicles. Presented By: Sumant Kumar
Fuel Efficiency Norms for Heavy Duty Vehicles Presented By: Sumant Kumar Agenda Impact of Growing Economy in India Why FE Norms for Heavy Duty Vehicles Development of Fuel Economy norms for heavy duty
Olson-EcoLogic Engine Testing Laboratories, LLC
Olson-EcoLogic Engine Testing Laboratories, LLC ISO 9001:2008 Registered A White Paper Important Planning Considerations for Engine and/or Vehicle Emission Testing Objectives Including Fuel Economy and
NREL Transportation and Vehicles: Fleet DNA & Commercial Vehicle Technologies. Josh Eichman and Ken Kelly National Renewable Energy Laboratory
NREL Transportation and Vehicles: Fleet DNA & Commercial Vehicle Technologies Josh Eichman and Ken Kelly National Renewable Energy Laboratory March 7, 2018 NREL Transportation and Vehicle RD&D Activities
Impacts of Mileage Accumulation and Fast Charging on EV Range and Energy Usage - Part 3 -
Impacts of Mileage Accumulation and Fast Charging on EV Range and Energy Usage - Part 3 - Aaron Loiselle-Lapointe Aaron.Loiselle@Canada.ca (613)949-0918 Emissions Research and Measurement Section Environment
FUNCTIONAL DESIGN/ SIMULATION (CAE)
Bertrandt AG Head office Birkensee 1 71139 Ehningen Telephone +49 7034 656-0 Telefax +49 7034 656-4100 www.bertrandt.com www.sahara.de Photos: Andreas Körner, Stuttgart; Bertrandt archive, istockphoto,
Engine conversions to LPG or CNG are expensive and complex. The solution is InjectoReducer
Engine conversions to LPG or CNG are expensive and complex The solution is InjectoReducer Why use LPG or CNG? What is LPG Liquefied Petroleum Gas is a gas mostly propane and butane stored in a cylindrical
ADVANCED TRAINING INSTITUTE, HYDERABAD PR04/F01
Revision: 01 LEARNING CONTENT Page 1 of 9 III COURSE CODE HE-01 COURSE TITLE BASIC AND MAINTAINENCE OF PETROL AND DIESEL ENGINE OBJECTES On completion of the course, the learner will be able to identify
Cracking the Gordian Knot: Advancing ATN Development and Deployment
Cracking the Gordian Knot: Advancing ATN Development and Deployment It s Been 40 Years! If ATNs are so great, why don t we see them everywhere in our cities and suburbs? Heathrow, Masdar City and Suncheon
Addressing performance balancing in fuel economy driven vehicle programs
EAEC-ESFA 2015 Presenter: Dr. Filip Deblauwe Addressing performance balancing in fuel economy driven vehicle programs Smarter decisions, better products. Introduction Performance balancing Application
Design Evaluation of Fuel Tank & Chassis Frame for Rear Impact of Toyota Yaris
International Research Journal of Engineering and Technology (IRJET) e-issn: 2395-0056 Volume: 03 Issue: 05 May-2016 p-issn: 2395-0072 www.irjet.net Design Evaluation of Fuel Tank & Chassis Frame for Rear
1 [94. NOISE LIMIT FOR GENERATOR SETS RUN WITH DIESEL
[94. NOISE LIMIT FOR GENERATOR SETS RUN WITH DIESEL. Noise limit for diesel generator sets (upto 000 KVA) manufactured on or after the [ st January, 005]. The maximum permissible sound pressure level for
ARAI/TA(4G)/GEN-MAINT/EXOSCAN-V/ Dated 26 th Mar 2009 CERTIFICATE FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES
CERTIFICATE FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES M/s Gen-Maint 106-107, New Diamond Premises Coop. Soc. Ltd. Off. Western Express Highway Goregaon (E) Mumbai 400 063 Cert Annex Drg Tot al
AVL EMISSION TEST SYSTEMS International sight of future emission programs K. Engeljehringer AVL List GmbH, Graz, Austria
AVL EMISSION TEST SYSTEMS International sight of future emission programs K. Engeljehringer AVL List GmbH, Graz, Austria SEMINÁRIO DE EMISSÕES AEA, 25.04.2013 "Our air may be better - A critical approach
Vibration Fatigue Analysis of Sheet Metal Fender Mounting Bracket & It's Subsequent Replacement With Plastic
Vibration Fatigue Analysis of Sheet Metal Fender Mounting Bracket & It's Subsequent Replacement With Plastic Vikas Palve Manager - CAE Mahindra Two Wheelers Ltd D1 Block, Plot No 18/2 (Part), Chinchwad,
Vehicle Safety Research in TGGS
Vehicle Safety Research in TGGS Core Knowledge of Automotive Safety and Assessment Engineer Program and Research in TGGS Vehicle fundamentals and manufacturing process Vehicle and part Assessment Crash
AVL SERIES BATTERY BENCHMARKING. Getting from low level parameter to target orientation
1 AVL SERIES BATTERY BENCHMARKING Getting from low level parameter to target orientation CONTENTS OVERVIEW 1. AVL Introduction 2. Focus Series Battery Benchmarking 3. Benchmarking process 4. Target comparability
India 1999 Emission Standards based on Euro 1 MVEG-A test cycle w/40 sec. idle before sampling
India 1999 Emission Standards based on Euro 1 MVEG-A test cycle w/40 sec. idle before sampling In the 1999-2000 timeframe, India required new light-duty vehicles to comply with Euro 1 emission standards.
PEMS International Conference & Workshop April 3, 2014
PEMS International Conference & Workshop April 3, 2014 US Environmental Protection Agency, Office of Transportation & Air Quality National Vehicle, Fuel & Emissions Laboratory, Ann Arbor, MI Outline Partnerships
Smarter Solutions for a Clean Energy Future
April 8, 2013 FUEL CELL ENGINEERING SERVICES Smarter Solutions for a Clean Energy Future TJ Lawy Platform Manager, Engineering Services 2013 BALLARD POWER SYSTEMS, INC. ALL RIGHTS RESERVED. Who We Are
A Study of the Two Wheeler Retarder Type Dynamometer System
A Study of the Two Wheeler Retarder Type Dynamometer System Nilesh R. Mate 1, Prof. D. Y. Dhande 2 P.G. Student, Department of Mechanical Engineering, A.I.S.S.M.S. College of Engineering, Pune, India 1
SIAM Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy
Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy 10 th -12 th December 2001 Bangkok Indian Scenario Two types of I&M programmes
A Comparative Study and Analysis of Emission Norms Adopted by Developed and Developing Nations
A Comparative Study and Analysis of Emission Adopted by Developed and Developing Nations Pankaj Sharma 1, Mohit Yadav 2, Deepak Yadav 3, Devendra Vashist 4 1,2,,3 Student, 4 Professor Automobile Engineering
Korea s Policy towards Vehicle Safety Standards Harmonization
Informal document No. WP.29-140-22 (140th WP.29, 14-17 November 2006, agenda item 7.) Korea s Policy towards Vehicle Safety Standards Harmonization November 2006 Ministry of Construction and Transportation
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MGA RESEARCH CORPORATION 4 446 Executive Drive Troy, MI 48083 Helen Kaleto Phone: 248 577 5001 Email: helen.kaleto@mgaresearch.com Website: www.mgaresearch.com
2014 Ram Federal/Canada Safety Standards
INTRODUCTION This is Issue No. 42 of The Application of Federal and Canada Motor Vehicle Safety Standards/Regulations to Ram trucks, SUVs, and minivans. These pages discuss their respective Safety Acts,
Cylinder Deactivation System Overview. May
Cylinder Deactivation System Overview May 13 2016 2 A Brief History of Jacobs, the original compression release retarder manufacturer Roots go back to a pioneer of the diesel engine and inventor of the
TRANSIT BUS EMISSION STUDY COMPARISON OF EMISSIONS FROM DIESEL AND NATURAL GAS BUSES
TRANSIT BUS EMISSION STUDY COMPARISON OF EMISSIONS FROM DIESEL AND NATURAL GAS BUSES Nils-Olof Nylund & Kimmo Erkkilä 1 THE FINNISH NATIONAL BUS PROJECT 2002-2004 VTT performed more than 200 emission measurements
In-use testing in the European vehicle emissions legislation
In-use testing in the European vehicle emissions legislation PEMS 2014 International Conference & Workshop 3-4 April 2014 Center for Environmental Research & Technology UC Riverside, USA Martin Weiss,
Automotive Vehicles Bumper fitment on M1 Category of Vehicles Test Methods
AUTOMOTIVE INDUSTRY STANDARD Automotive Vehicles Bumper fitment on M1 Category of Vehicles Test Methods PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P. B. NO. 832. PUNE 411 004 ON BEHALF OF
HEXAGON STUDIO. Nilay Yalcinkaya Yoruk / R&D Incentives and Intellectual Property Team Leader
HEXAGON STUDIO Nilay Yalcinkaya Yoruk / R&D Incentives and Intellectual Property Team Leader H2020 Smart Green and Integrated Transport 2018 calls Brokerage event Recommendations for Presentations EC Transport
PRIMA 3128.K PRIMA 2528.K. Boost your productivity. Go world class. Construck presents. the Prima Range of Tippers
PRIMA 2528.K PRIMA 3128.K Boost your productivity. Go world class. Construck presents the Prima Range of Tippers Construck from Tata Motors is a wide range of powerful and fuel-efficient vehicles for the
Clean Air Zone (CAZ) - CLEAN VEHICLE RETROFIT CERTIFICATION (CVRC) CHASSIS DYNAMOMETER TEST PROCEDURES FOR APPROVAL OF LOW EMISSION ADAPTATIONS
Clean Air Zone (CAZ) - CLEAN VEHICLE RETROFIT CERTIFICATION (CVRC) CHASSIS DYNAMOMETER TEST PROCEDURES FOR APPROVAL OF LOW EMISSION ADAPTATIONS Test procedures for measuring pollutant and greenhouse gas
Integrated. Safety Handbook. Automotive. Ulrich Seiffert and Mark Gonter. Warrendale, Pennsylvania, USA INTERNATIONAL.
Integrated Automotive Safety Handbook Ulrich Seiffert and Mark Gonter INTERNATIONAL. Warrendale, Pennsylvania, USA Table of Contents Preface ix Chapter 1 The Need to Increase Road Safety 1 1.1 Introduction
Criteria for Vehicle Types, Variants and Versions
DRAFT AUTOMOTIVE INDUSTRY STANDARD Criteria for Vehicle Types, Variants and Versions (Revision 1) ARAI Date of hosting on website: 10 th August 2015 Last date for comments : 31 st August 2015 Page 1 of
REAL WORLD DRIVING. Fuel Efficiency & Emissions Testing. Prepared for the Australian Automobile Association
REAL WORLD DRIVING Fuel Efficiency & Emissions Testing Prepared for the Australian Automobile Association - 2016 2016 ABMARC Disclaimer By accepting this report from ABMARC you acknowledge and agree to
Structural performance improvement of passenger seat using FEA for AIS 023 compliance
Structural performance improvement of passenger seat using FEA for AIS 023 compliance 1 Satyajit Thane, 2 Dr.R.N.Patil, 3 Chandrakant Inamdar 1 P.G.Student, 2 Prof. & Head, 3 Director 1 Department of Mechanical
TTIP Regulatory Aspects
TTIP Regulatory Aspects Automobile industry perspective JOINT JURI/INTA PUBLIC HEARING EUROPEAN PARLIAMENT TUESDAY, 27 JANUARY 2015 Erik Jonnaert Secretary General, ACEA Wednesday, 28 January 2015 ACEA
Driver-Perceived Noise Level of Agricultural Tractors - Method of Measurement
AUTOMOTIVE INDUSTRY STANDARD Driver-Perceived Noise Level of Agricultural Tractors - Method of Measurement PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF
A Strategic Roadmap to the Market Development of Certified Heavy Duty Gaseous Fuel (methane/lpg)-diesel Engines
A Strategic Roadmap to the Market Development of Certified Heavy Duty Gaseous Fuel (methane/lpg)-diesel Engines Based upon the results of the Critical Issues Workshop: Dual-Fuel (Gaseous/Diesel) Engines:
Leading the World in Emissions Solutions
Leading the World in Emissions Solutions Solutions for Vehicle Emissions CDTI is a leading global manufacturer and distributor of heavy duty diesel and light duty vehicle emissions control systems and
NVH. NVH: from the Vehicle to the Lab. Damián González Centro Tecnológico de Automoción de Galicia
NVH From the Vehicle to the Lab Damián González Centro Tecnológico de Automoción de Galicia www.ctag.com 1 Contents 1. Problem Definition: NVH in Vehicle Components 2. Proposed Solution: From the Vehicle
Introduction to Particulate Emissions 1. Gasoline Engine Particulate Emissions Introduction 3. References 7 About the Authors 8
contents SECTION 1 Introduction to Particulate Emissions 1 CHAPTER 1 Gasoline Engine Particulate Emissions Introduction 3 References 7 About the Authors 8 CHAPTER 2 Health Impact of Particulates from Gasoline
PORTRAIT COMPANY. TwintecBaumot GROUP POWERTRAIN. EGA. TURNKEY SOLUTIONS. YOUR RELIABLE PARTNER FOR POWERTRAIN, EGA & TURNKEY SOLUTIONS
Company portrait INTRODUCING TwintecBaumot GROUP COMPANY PORTRAIT DEVELOPMENT, APPLICATION AND PRODUCTION FROM A SINGLE SOURCE POWERTRAIN. EGA. TURNKEY SOLUTIONS. TwintecBaumot GROUP YOUR RELIABLE PARTNER
Liquid Filtration Experience and Capabilities
Liquid Filtration Experience and Capabilities Donaldson understands the need for new and unique liquid filtration technologies and solutions. We have a global infrastructure and technical expertise to
MY GHG Standard for Light Duty Vehicles Mass Reduction
MY2017-2025 GHG Standard for Light Duty Vehicles Mass Reduction Hugh Harris Environmental Protection Agency Outline 1) Overview of MY 2017-2025 light-duty vehicle GHG rule and Mid-Term Evaluation 2) Agency
Road tests and vehicle testing. Our services Experience Competence
Road tests and vehicle testing Our services Experience Competence Road tests and vehicle testing are part of the automotive development and launch process. Optimizing the entire vehicle. Road tests and
INDIA EMISSION REGULATIONS SUMMARY
INDIA EMISSION REGULATIONS SUMMARY Ramesh Pasarija Chairman, Technical Committee IDEMA Important Note The norms informed here are for reference only and there may be some errors. For precise norms and
Vehicle Performance. Pierre Duysinx. Research Center in Sustainable Automotive Technologies of University of Liege Academic Year
Vehicle Performance Pierre Duysinx Research Center in Sustainable Automotive Technologies of University of Liege Academic Year 2015-2016 1 Lesson 4: Fuel consumption and emissions 2 Outline FUEL CONSUMPTION
Electric Power Train Vehicles - Method of Measuring the Range
AUTOMOTIVE INDUSTRY STANDARDS Electric Power Train Vehicles - Method of Measuring the Range (Revision 1) PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF
Product Development Process
ENGINE ENGINEERING SYSTEM INTEGRATION COMMERCIAL VEHICLE ENGINEERING ENGINE ENGINEERING DRIVETRAIN ENGINEERING SIMULATION & TESTING SERVICES PRODUCTION TECHNICAL APPLICATION SOFTWARE & SUPPORT Product
Olson-EcoLogic Engine Testing Laboratories, LLC
Olson-EcoLogic Engine Testing Laboratories, LLC Fuel Economy Comparison TEST REPORT With Toyota and Hyundai Automobiles When Tested Over the CARB Approved AMA Road Test Cycle For: SaviCorp 2530 South Birch
Electric Power Train Vehicles - Method of Measuring the Range
FINALISED DRAFT AUTOMOTIVE INDUSTRY STANDARDS Electric Power Train Vehicles - Method of Measuring the Range (Revision 1) ARAI Date of hosting on website: 4 th Last date for comments : 5 th July 2014 1
CHAPTER 4 : RESISTANCE TO PROGRESS OF A VEHICLE - MEASUREMENT METHOD ON THE ROAD - SIMULATION ON A CHASSIS DYNAMOMETER
CHAPTER 4 : RESISTANCE TO PROGRESS OF A VEHICLE - MEASUREMENT METHOD ON THE ROAD - SIMULATION ON A CHASSIS DYNAMOMETER 1. Scope : This Chapter describes the methods to measure the resistance to the progress
Optimization of Partial Filter Technology for Diesel Engines
27-1- 425 Optimization of Partial Filter Technology for Diesel Engines Pavel Farafontov, John Muter, Shazam Williams DCL International Inc., P.O. Box 9, Concord, Ontario, Canada, L4K 1B2 Copyright 27 SAE
A Total Solution for Automotive Helical Spring Design
A Total Solution for Automotive Helical Spring Design APM Engineering & Research Sdn. Bhd. BON KOK WUI & TAN MING SHENG Date 27 th August, 2013 Company Background : APM Engineering & Research Sdn. Bhd.
Case Study on Design Optimisation & Regulation Review of Vehicle Front End Structural Crashworthiness
Case Study on Design Optimisation & Regulation Review of Vehicle Front End Structural Crashworthiness Parag R. Andhare 1, Dr. A.M. Badadhe 2 1B.E.MECH. (M.E.Pursuing), Mechanical Department, Rajeshri Shahu
2014 HBM ncode Products User Group Meeting
Sine Sweep and PSD Vibration Fatigue Life Prediction Ricky Lin Engineering and R&D Bendix Commercial Vehicle Systems G Acceleration [G²/Hz] 1.20E+00 1.00E+00 8.00E-01 6.00E-01 4.00E-01 2.00E-01 0.00E+00-2.00E-01
Requirements for Metallic Fuel Tanks of Automotive Vehicles
AUTOMOTIVE INDUSTRY STANDARD Requirements for Metallic Fuel Tanks of Automotive Vehicles PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY
Roadmap Data Update and Model Validation Documentation September 2017
Roadmap Data Update and Model Validation Documentation September 2017 This document provides an overview of the updates that were made to the Roadmap model during the summer of 2017, and indicates the
GLOBAL PRESSURE SOLUTIONS HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Customer Testing Services MAXIMATOR worldwide MAXIMATOR AS MAXIFES MAXIMATOR Test LLC. MAXPRO MAXIMATOR MAXIFLO MAXIMATOR BeNeLux MAXITECH
Recent Developments in BMW s Diesel Technology. DEER Conference 2003 Newport, USA August 2003
EA Recent Developments in BMW s Diesel Technology DEER Conference 2003 Newport, USA August 2003 EA Recent Developments in BMW s Diesel Technology BMW Diesel History 2.5 - R6 - DI - VNT 55 revision 3 rd
INTRODUCTION SECTION I. 08/01/ Federal/Canada Safety Standards Ram C/V
INTRODUCTION This is Issue No. 42 of The Application of Federal and Canada Motor Vehicle Safety Standards/Regulations to Ram trucks, SUVs, and minivans. These pages discuss their respective Safety Acts,
2013 Ram Federal/Canada Safety Standards
INTRODUCTION This is Issue No. 42 of The Application of Federal and Canada Motor Vehicle Safety Standards/Regulations to Ram trucks, SUVs, and minivans. These pages discuss their respective Safety Acts,
AIS 123 (PART 1): CMVR
AMENDMENT No. 2 (8 th September 2018) To AIS 123 (PART 1): CMVR Type Approval of Hybrid Electric System Intended for Retro-fitment on Vehicles of M and N Category having GVW
Inventory Of GHGs And Other Urban Pollutants From Transport Sector In Delhi And Calcutta
Proceedings of IGES/APN Mega-City Project 23-25 January 22 (Rihga Royal Hotel Kokura, Kitakyushu Japan) 22 Institute for Global Environmental Strategies All rights reserved. Inventory Of GHGs And Other
TU Graz work related to PHEM and data collection
TU Graz work related to PHEM and data collection Stefan Hausberger, Martin Rexeis, Claus Matzer, Konstantin Weller TU Graz Lyon, 23. May 2016 1 Topics we would like to discuss Part I: PHEM and PEMS data
Improved Vehicular Safety Technologies & Roadworthiness of In-Service Vehicles
IRF Road Safety Challenge for Africa (11-12 th March 2015-Addis Ababa (Ethiopia) Improved Vehicular Safety Technologies & Roadworthiness of In-Service Vehicles Balraj Bhanot Chairman TEDC(BIS) Adviser
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV
ENGINEERS MAKES THE WORLD
ENGINEERS MAKES THE WORLD PRACTICAL TRAINNING at GABRIEL INDIA LTD.,GURGAON. Gabriel India Limited, a leading name in the Indian auto component nt industry, manufactures Ride Control Products and Engine
Australian/New Zealand Standard
AS/NZS 3696.19:2009 AS/NZS 3696.19:2009 Australian/New Zealand Standard Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) AS/NZS 3696.19:2009 This
Lower life cycle costs ahead.
Paratransit Lower life cycle costs ahead. Made in the U.S.A. The MV-1 is the first mobility vehicle to drive ownership costs lower. Made in the U.S.A. Built from the ground up for uncompromised durability.
AUTOMOTIVE INDUSTRY STANDARD
AUTOMOTIVE INDUSTRY STANDARD Statutory Plates and Inscriptions for Agricultural Tractors, their Location and Method of Attachment Agricultural Tractor Identification Numbering System PRINTED BY THE AUTOMOTIVE