DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
|
|
- Lorraine Green
- 6 years ago
- Views:
Transcription
1 DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS ; Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten (ISO 9038 : 2002) European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been published in accordance with a decision taken by CEN/TC 139 Paints and varnishes (Secretariat: Germany) to adopt, without alteration, International Standard ISO 9038 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards Committee), Technical Committee Allgemeine Prüfverfahren für Beschichtungsstoffe und Beschichtungen. The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows: ISO Standard DIN Standard ISO 1513 DIN EN ISO 1513 ISO 3170 DIN EN ISO 3170 ISO 3171 DIN EN ISO 3171 ISO DIN EN ISO National Annex NA Standards referred to (and not included in Normative references and Annex ZA) DIN EN ISO 1513 Paints and varnishes Examination and preparation of samples (ISO 1513 : 1992) DIN EN ISO 3170 Petroleum liquids Manual sampling (ISO 3170 : A1 : 1998) DIN EN ISO 3171 Petroleum liquids Automatic pipeline sampling (ISO 3171 : 1988) DIN EN ISO Paints, varnishes and raw materials for paints and varnishes Sampling (ISO : 2000) Continued overleaf. Document comprises 15 pages. Normenausschuss Bauwesen (NABau) im DIN No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.v., Berlin. Beuth Verlag GmbH, Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group
2
3 EN ISO 9038 November 2003 ICS ; English version Test for sustained combustibility of liquids (ISO 9038 : 2002) Essai de combustion entretenue de liquides (ISO 9038 : 2002) Prüfung der Weiterbrennbarkeit von Flüssigkeiten (ISO 9038 : 2002) This European Standard was approved by CEN on CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: rue de Stassart 36, B-1050 Brussels CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E
4 Page 2 Foreword International Standard ISO 9038 : 2002 Test for sustained combustibility of liquids, which was prepared by ISO/TC 35 Paints and varnishes of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 139 Paints and varnishes, the Secretariat of which is held by DIN, as a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by May 2004 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and the United Kingdom. Endorsement notice The text of the International Standard ISO 9038 : 2002 was approved by CEN as a European Standard without any modification. NOTE: Normative references to international publications are listed in Annex ZA (normative)
5 Page 3
6 Page 4
7 Page 5
8 Page 6
9 Page 7
10 Page 8
11 Page 9
12 Page 10
13 Page 11
14 Page 12
15 Page 13
16 Page 14
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe
More informationDEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887
DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887
More informationDEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042
DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042
More informationDEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte
More informationDEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)
DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;
More informationDEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016
DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)
More informationDEUTSCHE NORM January 2004 DIN EN {
DEUTSCHE NORM January 2004 DIN EN 13698-1 { ICS 55.180.20 Supersedes DIN 15146-2, November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden
More informationDEUTSCHE NORM February 2003
DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion
More informationDEUTSCHE NORM July 1998
DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85
More informationDEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN
DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.
More informationDEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More informationPart 1: Specifications for pipes, fittings and the system English version of DIN EN
DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6245:2003 Naftasaadused. Tuha määramine Petroleum products - Determination of ash EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationDEUTSCHE NORM June 2002
DEUTSCHE NORM June 2002 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories Part 1: Steel flanges, PN designated English version of DIN EN 1092-1 { EN 1092-1 ICS 23.040.60
More informationWATER-TUBE BOILERS AND AUXILIARY
IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -
More informationProvläsningsexemplar / Preview
Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted
More informationCOLD ROLLED STEEL SECTIONS -
STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection Petroleum products - Test method for free water in liquefied petroleum gas
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
More informationRESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method Ethanol as a blending component for petrol - Determination
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14264:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: impregnating pitch - Characteristics and test methods Derivatives from coal pyrolysis
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11446:2004 Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation Passenger
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12591:2000 Bitumen and bituminous binders - Specifications for paving grade bitumens Bitumen and bituminous binders - Specifications for paving grade bitumens EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 284:2006 Transpordipakendid. Klassi C transpordipakendid. Mõõtmed ja üldnõuded Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements EESTI STANDARDIKESKUS
More informationDEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity
DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12642:2006 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles
More informationEurocode 2 Design of concrete structures
BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS
More informationGasflaskor Fyllningsförhållanden för batterifordon för acetylen
SVENSK STANDARD SS-EN 13720 Fastställd 2003-03-28 Utgåva 1 Gasflaskor Fyllningsförhållanden för batterifordon för acetylen Transportable gas cylinders Filling conditions for acetylene battery vehicles
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12900:2005 Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data Refrigerant compressors - Rating conditions, tolerances and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination
More informationFlödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997)
SVENSK STANDARD SS-EN ISO 10628 Fastställd 2003-04-04 Utgåva 1 Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997) ICS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallet sizes 800 x 1200, 1000 x 1200 and 1140 x 1140 mm Plastics jerricans
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1983:2006 Tööstuslikud ventiilid. Terasest kuulklapid Industrial valves - Steel ball valves EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15020:2006 Raudteealased rakendused. Pukseerseadmed. Toimimisnõuded, liidese erigeomeetria ja katsemeetodid Railway applications - Rescue coupler - Performance requirements, specific
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12284:2003 Külmetussüsteemid ja soojuspumbad. Ventiilid. Nõuded, testimine ja markeerimine Refrigerating systems and heat pumps - Valves - Requirements, testing and marking EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationSteel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN
DEUTSCHE NORM February 2000 Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN 10222-5 { EN 10222-5 ICS 23.020,30; 77.140.80;
More informationINDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.
IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15490:2007 Ethanol as a blending component for petrol - Determination of phe Ethanol as a blending component for petrol - Determination of phe EESTI STANDARDIKESKUS EESTI STANDARDI
More informationILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen
Railway applications - Vehicle reference masses Bahnanwendungen - Fahrzeugreferenzmassen Applications ferroviaires - Masses de référence des véhicules 07/2017 National Foreword This European Standard EN
More informationEurocode 8: Design of structures for earthquake resistance
BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard
More informationSteel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing
Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
More informationUtrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder. Roller sports equipment Inline-skates Safety requirements and test methods
SVENSK STANDARD SS-EN 13843 Fastställd 2003-02-21 Utgåva 1 Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder Roller sports equipment Inline-skates Safety requirements and test methods
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12092:2002 Adhesives - Determination of viscosity Adhesives - Determination of viscosity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks Installations
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonium solution Chemicals used for treatment of water intended for human consumption - Ammonia
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12723:2000 Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units Liquid pumps - General terms for pumps and installations -
More informationKondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001)
SVENSK STANDARD SS-EN ISO 4257 Fastställd 2001-09-14 Utgåva 2 Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001) ICS 75.160.30
More informationLaboratorieglas Byretter (ISO 385:2005)
SVENSK STANDARD SS-EN ISO 385:2005 Fastställd 2005-07-11 Utgåva 1 Laboratorieglas Byretter (ISO 385:2005) Laboratory glassware Burettes (ISO 385:2005) ICS 17.060; 71.040.20 Språk: engelska Publicerad:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12674-3:2004 Roll containers - Part 3: Test methods Roll containers - Part 3: Test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 805:2000 Water supply - Requirements for systems and components outside buildings Water supply - Requirements for systems and components outside buildings EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14522:2005 Gaaside ja aurude isesüttimistemperatuuri määramine Determination of the auto ignition temperature of gases and vapours EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12255-6:2002 Wastewater treatment plants - Part 6: Activated sludge processes Wastewater treatment plants - Part 6: Activated sludge processes EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings Thermal spraying - Recommendations for constructional design
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12173:2005 Chemicals used for treatment of water intended for human consumption - Sodium fluoride Chemicals used for treatment of water intended for human consumption - Sodium fluoride
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation
More informationCHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF VIRUCIDAL ACTIVITY AGAINST BACTERIOPHAGES OF
IRISH STANDARD I.S. EN 13610:2003 ICS 11.080.20 67.050 71.100.35 CHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12120:2005 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite Chemicals used for treatment of water intended for human consumption - Sodium
More informationContinuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape
Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14367:2005 Backflow preventer with different non controllable pressure zones - Family C - Type A Non controllable backflow preventer with different pressure zones - Family C, type
More informationAerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification
SVENSK STANDARD SS-EN 3747 Fastställd 2003-01-31 Utgåva 1 Aerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification ICS 49.025.40 Språk: engelska Publicerad: mars 2003 Copyright
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6974-3:2002 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10246-8:2000 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
More informationSVENSK STANDARD SS-EN 1949/A1:2005. Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar
SVENSK STANDARD SS-EN 1949/A1:2005 Fastställd 2005-07-28 Utgåva 1 Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar Specification for the installation
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
More informationSVENSK STANDARD SS-EN 14263:2004. Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck
SVENSK STANDARD SS-EN 14263:2004 Fastställd 2004-10-22 Utgåva 1 Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck Egenskaper och testmetoder Derivatives
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
More informationMETALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2003) IRISH STANDARD I.S. EN ISO 18265:2003. Price Code
IRISH STANDARD I.S. EN ISO 18265:2003 ICS 77.040.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO
More informationEurocode 1 Actions on structures
BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British
More informationSkyddshandskar mot kemikalier och mikroorganismer
SVENSK STANDARD SS-EN 374-1:2004 Fastställd 2004-01-23 Utgåva 2 Skyddshandskar mot kemikalier och mikroorganismer Del 1: Terminologi och fordringar på prestanda Protective gloves against chemicals and
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract Paper and board intended to come into contact with foodstuffs
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 14667:2006 Fastställd 2006-12-06 Utgåva 1 Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12806:2003 Automotive liquefied petroleum gas components - Other than containers Automotive liquefied petroleum gas components - Other than containers EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13535:2001 Fertilizers and liming materials - Classification Fertilizers and liming materials - Classification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationSVENSK STANDARD SS-EN Gasflaskor Batterifordon för komprimerade och kondenserade gaser (exklusive acetylen) Kontroll vid fyllning
SVENSK STANDARD SS-EN 13385 Fastställd 2002-04-19 Utgåva 1 Gasflaskor Batterifordon för komprimerade och kondenserade gaser (exklusive acetylen) Kontroll vid fyllning Transportable gas cylinders Battery
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1772:2000 Surface active agents - Determination of wetting power by immersion Surface active agents - Determination of wetting power by immersion (ISO 022:10, modified) EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13452-1:2003 Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements Railway applications - Braking - Mass transit brake systems - Part 1: Performance
More informationGarden equipment Powered lawnmowers Safety
SVENSK STANDARD SS-EN 836/A3:2004 Fastställd 2004-02-13 Utgåva 1 Trädgårdsmaskiner Motordrivna gräsklippare Maskinsäkerhet Garden equipment Powered lawnmowers Safety ICS 65.060.70 Språk: engelska Publicerad:
More informationSVENSK STANDARD SS-EN Provningsmetoder för natursten Bestämning av åldringsbeständighet genom saltdimma
SVENSK STANDARD SS-EN 14147 Fastställd 2003-11-28 Utgåva 1 Provningsmetoder för natursten Bestämning av åldringsbeständighet genom saltdimma Natural stone test methods Determination of resistance to ageing
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation
More informationSVENSK STANDARD SS-EN ISO 4684:2005. Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005)
SVENSK STANDARD SS-EN ISO 4684:2005 Fastställd 2005-11-11 Utgåva 1 Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005) Leather Chemical tests Determination of volatile matter (ISO 4684:2005)
More informationEVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13953:2003+A1:2007 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) (KONSOLIDEERITUD TEKST) LPG equipment
More informationDel 8: Krav på skyddsanordningar mot skadligt tryck. Shell boilers Part 8: Requirements for safeguards against excessive pressure
SVENSK STANDARD SS-EN 12953-8 Fastställd 2001-12-07 Utgåva 1 Eldrörspannor Del 8: Krav på skyddsanordningar mot skadligt tryck Shell boilers Part 8: Requirements for safeguards against excessive pressure
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 3675:2006 Toornafta ja vedelad naftaproduktid. Laboratoorne tiheduse määramine. Areomeetriline meetod (ISO 3675:1998) Crude petroleum and liquid petroleum products - Laboratory
More information