Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Size: px
Start display at page:

Download "Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005"

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: ITAP - Institut für technische und angewandte Physik GmbH Marie-Curie-Straße 8, Oldenburg Tests in the fields: Determination of the emissions and immissions of sounds and vibrations; noise in the workplace; selected methods for noise measurements on wind turbines; sound absorption; machine acoustics; underwater noise; Module Immission Control Abbreviations used: see last page This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/6

2 1 Fields of activity regulated by legal immission control Specifications according to Module Immission Control and DIN 45688: Determination of emissions and immssions of sounds Group V: Determination of emissions and immissions of sounds Designation TA Lärm Sixth General Administrative Provision to the Federal Immission Control Act; Technical instructions (TI) for the protection against noise TA Lärm (TI Noise) including the standards and guidelines specified therein PA 04 V3.0 PA 05 V3.0 PA 06 V3.0 PA 07 V3.0 PA 08 V3.0 PA 09 V3.0 TA Lärm General administrative regulation on installations subject to licensing according to 16 of the Trade Regulations; Technical instructions (TI) for the protection against noise TA Lärm (TI Noise) in connection with: VDI 2058 Sheet 1: "Assessment of work noise in the neighborhood" including the standards and guidelines specified therein PA 12 V BImSchV vom (BGBl. I S. 1036), geändert Dezember 2014 (BGBl. I S. 2269) 16. Ordinance on implementation of the Federal Immission Control Act (Traffic Noise Control Ordinance) PA 07 V3.0 Period of validity: to Translation - 2/6

3 Group V: Determination of emissions and immissions of sounds Designation 18. BImSchV vom (BGBl. I S. 1790) 18. Ordinance on implementation of the Federal Immission Control Act (Sports Facility Noise Control Ordinance) PA 04 V3.0 AVwV Baulärm General administrative regulation for the protection against construction noise noise immissions PA 08 V3.0 LAI-Freizeitlärm- RL 1995 Advice on the assessment of noise caused by recreational facilities PA 04 V3.0 DIN Measurement and evaluation of low-frequency noise immissions in the neighborhood in conjunction with DIN supplementary sheet 1 Measurement and evaluation of low-frequency noise immissions in the neighborhood; Indications for the assessment of commercial installations PA 06 V Determination of emissions and immissions of vibrations Group VI: Determination of emissions and immissions of vibrations Standard DIN Vibrations in buildings Part 1: Prediction of vibration parameters PA 03 V4.0 DIN Vibrations in buildings Part 2: Effects on persons in buildings PA 01 V4.0 DIN Vibrations in buildings Part 3: Effects on structures PA 02 V4.0 Period of validity: to Translation - 3/6

4 Group VI: Determination of emissions and immissions of vibrations Standard LAI- Erschütterungs- LL 2000 Indications for the measurement, assessment and reduction of vibration immissions PA 01 - PA 03 V4.0 2 Further methods for the determination of emissions and immissions of sounds DIN Berichtigung Acoustics Determination of tonal components of noise and determination of a tone adjustment for the assessment of noise immissions 3 Further methods for the determination of emissions and immissions of vibrations DIN Measurement of vibration immission Part 2: Measuring method 4 Noise in the workplace DIN LärmVibrationsArbSchV Determination of rating levels from measurements Part 2: Noise immissions at the work place (withdrawn standard) Ordinance for the protection of the employees against hazards due to noise and vibrations Period of validity: to Translation - 4/6

5 5 Sound absorption/machine acoustics reverberation room method DIN EN ISO DIN EN ISO Acoustics Measurement of sound absorption in a reverberation room Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms 6 Selected methods for the noise measurement on wind energy turbines FGW-Richtlinie Teil DIN EN (VDE ) Technical guidelines for wind energy turbines; Part 1: Determination of the sound emission values Wind turbines Part 11: Acoustic noise measurement technique 7 Measurement of underwater noise DIN SPEC ISO BSH BSH PA Nr Offshore wind farms In-situ determination of the insertion loss of control measures underwater Underwater acoustics Measurement of radiated underwater sound from percussive pile driving Offshore wind farms Measuring specification for underwater noise measurements Offshore wind farms Measuring specification for the quantitative determination of the effectiveness of soundproofing measures Offshore Underwater noise Forecast for underwater noise events according to the directive of the BSH Period of validity: to Translation - 5/6

6 The methods listed under Point 1 correspond to the requirements of the "special proof of competence in the area of immission control" ("Module Immission Control") in the version of 15 th September, Competence in the testing and technical task areas Group V and Group VI subject to immission control legislation is hereby confirmed. For the Module Immission Control the following persons are entitled to sign test reports: 1) Technically responsible: Areas: Dipl.-Phys. Hermann Remmers Group V 2) Technically responsible: Areas: Dr. Dipl.-Phys. Michael A. Bellmann Group VI Deputy representatives ad 1) Areas: Dipl.-Ing. (FH) Heiko Ihde Group V Deputy representatives ad 2): Areas: Dipl.-Ing. (FH) Inga Züwerink Group VI Abbreviations used: AVwV BImSchV BSH DIN IEC EG EN FGW ISO LAI PA SPEC TA VDE VDI General administrative regulation Ordinance to the Federal Immission Control Act Federal Maritime and Hydrographic Agency German Institute for Standardization e. V. (e. V. = registered association) International Electrotechnical Commission European Community European Standard FGW e. V. Promotional Organisation Wind Energy and other Decentralized Energies International Organization for Standardization Länder Committee for Immission Control Inspection Instruction of the ITAP Institute for Technical and Applied Physics GmbH Specification Technical Instruction Association of Electrical Engineering Electronics Information Technology e. V. Association of German Engineers Period of validity: to Translation - 6/6

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-16069-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 15.08.2018 to 25.05.2022 Holder of certificate: FIZ

More information

Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3

Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3 Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.02.2018 to 12.02.2023 Holder of certificate: DMT

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV

More information

Deutsche Akkreditierungsstelle GmbH

Deutsche Akkreditierungsstelle GmbH (( DAk~~"h' Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral

More information

Noise level, Power curves, Thrust curves

Noise level, Power curves, Thrust curves Nordex N117/3000 Nordex Energy GmbH, Langenhorner Chaussee 600, D-22419 Hamburg, Germany Alle Rechte vorbehalten. Schutzvermerk ISO 16016 beachten. F008_244_A03_EN Revision 00, 2012-10-24 1 / 9 Noise level

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech

More information

FAIRMODE Technical Meeting, LillestrØm, April 2014 Experiences with standardization in Germany

FAIRMODE Technical Meeting, LillestrØm, April 2014 Experiences with standardization in Germany Für Mensch & Umwelt FAIRMODE Technical Meeting, LillestrØm, 28 29 April 2014 Experiences with standardization in Germany Arno Graff Section II 4.2/ Air Quality Asessment Experiences with standardization

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18137-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 19.03.2018 to 18.03.2023 Holder of certificate: Continental

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works

More information

Influence of mounting tube diameter on anemometer output

Influence of mounting tube diameter on anemometer output Influence of mounting tube diameter on anemometer output In cooperation with: Adolf Thies GmbH & Co. KG Hauptstraße 76 37083 Göttingen Germany Deutsche WindGuard Wind Tunnel Services GmbH Oldenburger Str.

More information

Accreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory

Accreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-11-22 to 2022-11-21 Date of issue: 2017-11-22

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18398-02-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Period of validity: 26.02.2018

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13412-01-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Indefinite since: 10.12.2018

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 19102 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.09.2013 to 02.09.2018 Holder of certificate: AUCOTEAM

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf

More information

UNIGLAS Tender Specifications

UNIGLAS Tender Specifications UNIGLAS Tender Specifications Special contractual conditions: Insulating glass elements The insulating glass elements used and integrated must be CE-certified, and insulating glass units in Germany must

More information

How do things run smoothly even in rough winds?

How do things run smoothly even in rough winds? How do things run smoothly even in rough winds? Rotor blade inspection during production and ongoing operation Rotor blade quality essential for energy yield Rotor blades must satisfy the most stringent

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb

More information

CERTIFICATE. Siemens AG Siemens Certification Authority. has implemented the specification listed below for the following certification services.

CERTIFICATE. Siemens AG Siemens Certification Authority. has implemented the specification listed below for the following certification services. CERTIFICATE This is to certify that Werner-von-Siemens-Straße 1 80333 München has implemented the specification listed below for the following certification services. Scope: / Trust Service Provider (TSP)

More information

Sound-absorbing spacer Sorp10

Sound-absorbing spacer Sorp10 Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy

More information

Period of validity: to Date of issue:

Period of validity: to Date of issue: Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.03.2017 to 02.02.2020 Holder of certificate: TÜV

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of

More information

HARMFUL AQUATIC ORGANISMS IN BALLAST WATER

HARMFUL AQUATIC ORGANISMS IN BALLAST WATER E MARINE ENVIRONMENT PROTECTION COMMITTEE 67th session Agenda item 2 MEPC 67/INF.29 8 August 2014 ENGLISH ONLY HARMFUL AQUATIC ORGANISMS IN BALLAST WATER Information on the Type Approval Certificate for

More information

RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC

RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references 18 January 2019 RSB reference code: RSB-DOC-10-001 Published by the Roundtable on Sustainable Biomaterials. This publication

More information

RSB List of Documents and references

RSB List of Documents and references Type of document: Reference Document Date: 20 March 2017 RSB List of Documents and references RSB reference code: [RSB-DOC-10-001] Published by the Roundtable on Sustainable Biomaterials. This publication

More information

EC type-examination of SITEMA Safety Brakes by DGUV Test

EC type-examination of SITEMA Safety Brakes by DGUV Test EC type-examination of SITEMA Safety Brakes by DGUV Test After thorough examination, the testing and certification body of the DGUV (German Statutory Accident Insurance) has issued the EC type-examination

More information

Accreditation. a'1" ul. ( oar.hl,.n" Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n" r,nn" Head of Division

Accreditation. a'1 ul. ( oar.hl,.n Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n r,nn Head of Division ( oar.hl,.n" Akkreditieru ngsstel le Deutsche Akkreditieru ngsstelle G m bh Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStellecBV Signatory the

More information

Technical Guidelines for Power Generating Units and Systems

Technical Guidelines for Power Generating Units and Systems Technical Guidelines for Power Generating Units and Systems PART 8 (TG 8) Certification of the Electrical Characteristics of Power Generating Units and Systems in Low-, Medium-, Highand Extra-High Voltage

More information

ISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie

ISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie INTERNATIONAL STANDARD ISO 9129 Second edition 2008-05-15 Motorcycles Measurement methods for moments of inertia Motocycles Méthodes de mesure des moments d'inertie Reference number ISO 2008 PDF disclaimer

More information

ISO 8714 INTERNATIONAL STANDARD

ISO 8714 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8714 First edition 2002-11-01 Electric road vehicles Reference energy consumption and range Test procedures for passenger cars and light commercial vehicles Véhicules routiers

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 16183 First edition 2002-12-15 Heavy-duty engines Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under

More information

Certification Memorandum

Certification Memorandum Certification Memorandum Certification of Vibration Health Monitoring (VHM) Systems for compliance with Commission Regulation (EU) 2016/1199 introducing Annex V (Part-SPA) of Regulation (EU) No 965/2012

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11068-09-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 10.07.2014 to 09.07.2019 Holder of certificate: Karlsruher

More information

1CATALOGUE METEOROLOGICAL INSTRUMENTS. The weather specialists since 1859

1CATALOGUE METEOROLOGICAL INSTRUMENTS. The weather specialists since 1859 1CATALOGUE METEOROLOGICAL INSTRUMENTS The weather specialists since 1859 The fascination of the brand LAMBRECHT is made up by many factors: the legendary product quality is no coincidence but arises from

More information

Assessing and Enforcing Clean Air Regulations in Germany

Assessing and Enforcing Clean Air Regulations in Germany Assessing and Enforcing Clean Air Regulations in Germany Dr. habil. Uwe Lahl Head of Directorate-General Immission Control and Health Transatlantic Cooperation for Clean Air Brussels Workshop 5-6 February

More information

ISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems

ISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems INTERNATIONAL STANDARD ISO 26867 First edition 2009-07-01 Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems Véhicules routiers Matériaux de friction

More information

TYPE-CERTIFICATE DATA SHEET

TYPE-CERTIFICATE DATA SHEET Kleinmotoren GmbH Issue: 04 series engine 18.09.2015 TYPE-CERTIFICATE DATA SHEET No. E.219 for Engine series engines Type Certificate Holder SOLO Kleinmotoren GmbH Stuttgarter Straße 41 71069 Sindelfingen

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under

More information

Überwachte Fertigungsstätte

Überwachte Fertigungsstätte Überwachte Fertigungsstätte Approved Place of Manufacture Solarwatt GmbH Maria-Reiche-Straße 2a 01109 Dresden Fertigungsstättennummer: Die Überwachung der Fertigungsstätte erfolgte nach dem europäischen

More information

ISO INTERNATIONAL STANDARD. Compressed air Part 5: Test methods for oil vapour and organic solvent content

ISO INTERNATIONAL STANDARD. Compressed air Part 5: Test methods for oil vapour and organic solvent content INTERNATIONAL STANDARD ISO 8573-5 First edition 2001-12-15 Compressed air Part 5: Test methods for oil vapour and organic solvent content Air comprimé Partie 5: Méthodes d'essai pour la teneur en vapeurs

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10816-3 Second edition 2009-02-01 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 3: Industrial machines with nominal power above

More information

Evidence of performance Reduction of impact sound pressure level by floor coverings

Evidence of performance Reduction of impact sound pressure level by floor coverings Evidence of performance Reduction of impact sound pressure level by floor coverings Test report No. 14-003029-PR01 (PB X3.1-F03-04-en-01) Client Product Getzner Werkstoffe GmbH Herrenau 5 6706 Bürs Austria

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14635-3 First edition 2005-09-15 Gears FZG test procedures Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid

More information

ISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge

ISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge INTERNATIONAL STANDARD ISO 10605 First edition 2001-12-15 Road vehicles Test methods for electrical disturbances from electrostatic discharge Véhicules routiers Méthodes d'essai des perturbations électriques

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61400-2 Second edition 2006-03 Wind turbines Part 2: Design requirements for small wind turbines This English-language version is derived from the original bilingual publication

More information

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001) DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11

More information

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 MATERIALPRÜFUNGSAMT NORDRHEI N - WESTFALEN EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation

More information

ISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Product definition and quality assurance

ISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Product definition and quality assurance INTERNATIONAL STANDARD ISO 15484 First edition 2008-08-01 Road vehicles Brake lining friction materials Product definition and quality assurance Véhicules routiers Matériaux de friction pour garnitures

More information

The Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory

The Deutsche Akkreditierungsstelle GmbH attests that the testing laboratory Deutsche GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral Agreements of EA, ILAC and IAF for Mutual Recognition

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 21069-1 First edition 2004-11-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 1: Pneumatic

More information

VDE FNN Information Solutions for the Future Power Grid

VDE FNN Information Solutions for the Future Power Grid VDE FNN Information Solutions for the Future Power Grid We are evolving the grid VDE Association The VDE Association for Electrical, Electronic and Information Technologies is one of the largest technical

More information

EEA AGREEMENT - ANNEX XIII p. 99 APPENDIX 2 { 1 }

EEA AGREEMENT - ANNEX XIII p. 99 APPENDIX 2 { 1 } 9.2.2019 - EEA AGREEMENT - ANNEX XIII p. 99 APPENDIX 2 { 1 } DOCUMENTS SET OUT IN THE ANNEX TO REGULATION (EC) NO 1072/2009 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL, AS ADAPTED FOR THE PURPOSES OF

More information

DÜRR NDT GmbH & CO. KG Höpfigheimer Straße Bietigheim-Bissingen

DÜRR NDT GmbH & CO. KG Höpfigheimer Straße Bietigheim-Bissingen Evaluation of the image quality of a radiographic film emulsion AGFA D7 exposed by X-rays and developed by machine processing (8 min cycle time at 29 C) using Dürr NDT XR D-6 NDT developer and XR F-6 NDT

More information

Section 1 Scope of application

Section 1 Scope of application Please note: The translation of this legal act into English language is a service for informational purposes only and shall not be legally binding. The Federal Office for Goods Transport does not therefore

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14839-2 First edition 2004-09-01 Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 2: Evaluation of vibration Vibrations mécaniques

More information

Report on the product testing, monitoring and evaluation of the FPC according to the contracted supervision Product type MDF El

Report on the product testing, monitoring and evaluation of the FPC according to the contracted supervision Product type MDF El EPH SUCCESS BY QUALITY Entwicklungs- und Prüflabor Holztechnologie GmbH Zellescher Weg 24 01217 Dresden Germany Kronospan Sebes SA Mr. Bandi, Mrs. Calin Str. Mihail Kogalniceau, 59 515800 Sebes Jud. Alba

More information

ISO INTERNATIONAL STANDARD. Road vehicles Road load Part 2: Reproduction on chassis dynamometer

ISO INTERNATIONAL STANDARD. Road vehicles Road load Part 2: Reproduction on chassis dynamometer INTERNATIONAL STANDARD ISO 10521-2 First edition 2006-10-01 Road vehicles Road load Part 2: Reproduction on chassis dynamometer Véhicules routiers Résistance sur route Partie 2: Reproduction sur banc dynamométrique

More information

Approval of SITEMA Safety Catchers for use as a mechanical restraint device in presses.

Approval of SITEMA Safety Catchers for use as a mechanical restraint device in presses. of SITEMA Safety Catchers for use as a mechanical restraint device in presses. The European Standard DIN EN 693 Machine tools - Safety - Presses ascertains the following facts: Where there is a risk of

More information

ABZ Aggregate-Bau for mobile power!

ABZ Aggregate-Bau for mobile power! ABZ Aggregate-Bau for mobile power! As manufacturers of engine-driven power generation sets, we make it possible: independent power supply, wherever it is needed: flexible, safe and stable. Our top quality

More information

Durch professionelle Datenanalyse clever optimieren sensitive Eis- und Schadenserkennung am Rotorblatt

Durch professionelle Datenanalyse clever optimieren sensitive Eis- und Schadenserkennung am Rotorblatt Durch professionelle Datenanalyse clever optimieren sensitive Eis- und Schadenserkennung am Rotorblatt Dr.-Ing. Carsten Ebert Wölfel Wind Systems Workshop Profi[t] am Wind, Linstow, November 2015 CE, 11.11.2015,

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION IEC/TS 62257-7-3 TECHNICAL SPECIFICATION Edition 1.0 2008-04 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set Selection of generator sets

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60383-2 First edition 1993-04 Insulators for overhead lines with a nominal voltage above 1 000 V Part 2: Insulator strings and insulator sets for a.c. systems Definitions, test

More information

TECHNICAL REPORT TYPE 3

TECHNICAL REPORT TYPE 3 TECHNICAL REPORT TYPE 3 IEC TR 61597 First edition 1995-05 Overhead electrical conductors Calculation methods for stranded bare conductors This English-language version is derived from the original bilingual

More information

ISO 4409 INTERNATIONAL STANDARD. Hydraulic fluid power Positivedisplacement

ISO 4409 INTERNATIONAL STANDARD. Hydraulic fluid power Positivedisplacement INTERNATIONAL STANDARD ISO 4409 Second edition 2007-04-01 Hydraulic fluid power Positivedisplacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance

More information

Regulatory update on implementation of the 0.50% sulphur limit for international shipping

Regulatory update on implementation of the 0.50% sulphur limit for international shipping Regulatory update on implementation of the 0.50% sulphur limit for international shipping Marshall Islands Quality Council (MIQC), 19 April 2018 Trinity House, London Dr Edmund Hughes Marine Environment

More information

ISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements

ISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO

More information

T E S T R E P O R T N o. E B E

T E S T R E P O R T N o. E B E T E S T R E P O R T N o. E B 1 8 1. 2 E on the regularity of the braking system of a vehicle in accordance with the regulations of the EC Directive 71/320/EEC or the UN-ECE Regulation no. 13 when installing

More information

Evidence of Performance Airborne sound insulation of flat roofs

Evidence of Performance Airborne sound insulation of flat roofs Evidence of Performance Test Report No. 15-002251-PR01 (PB X03-F01-04-en-01) Client Product Designation Knauf Insulation, D.O.O. Trata 32 4220 Skofja Loka Slovenia Flat roof as green roof Urbanscape Green

More information

National IMPLEMENTING MEASURES (IM) related to the specific General Protocol requirement*

National IMPLEMENTING MEASURES (IM) related to the specific General Protocol requirement* Authority: BaFin (DE) National IMPLEMENTING MEASURES (IM) related to the specific General Protocol requirement* Article 23 of the Methodology for Peer Review: National implementing measures may include

More information

Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15102-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 05.07.2017 to 04.07.2022 Date of issue: 05.07.2017

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14635-3 First edition 2005-09-15 Gears FZG test procedures Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid

More information

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19 July Köln, 17 August 2012

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19 July Köln, 17 August 2012 :~ ~~~~~============~----------------------~ Umwelt Bundes Amt @ For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035014 Certified

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14396 First edition 2002-06-01 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 21069-2 First edition 2008-05-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 2: Air

More information

Vertex Floors Ltd. Room B & C, 15/f Hang Seng Causeway Bay Building, 28 Yee Wo Street, Causeway Bay. P.R. China. Berlin, den

Vertex Floors Ltd. Room B & C, 15/f Hang Seng Causeway Bay Building, 28 Yee Wo Street, Causeway Bay. P.R. China. Berlin, den ALAB GmbH Wilsnacker Straße 15 10559 Berlin Simon Xia Room B & C, 15/f Hang Seng Causeway Bay Building, 28 Yee Wo Street, Causeway Bay Nach DIN EN ISO/IEC 17025:2005 durch die DAP Deutsches Akkreditierungssystem

More information

ISO INTERNATIONAL STANDARD. Measurement of noise emitted by accelerating road vehicles Engineering method Part 2: L category

ISO INTERNATIONAL STANDARD. Measurement of noise emitted by accelerating road vehicles Engineering method Part 2: L category INTERNATIONAL STANDARD ISO 362-2 First edition 2009-07-15 Measurement of noise emitted by accelerating road vehicles Engineering method Part 2: L category Mesurage du bruit émis par les véhicules routiers

More information

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016 Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection

More information

Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification

Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification BRITISH STANDARD BS ISO 11237-1:2004 Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications ICS 23.100.40; 83.140.40

More information

European Technical Assessment ETA-13/0900 of 10/04/2014

European Technical Assessment ETA-13/0900 of 10/04/2014 ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011

More information