|
|
- Charlene Townsend
- 5 years ago
- Views:
Transcription
1 Seite 1 von 4 Search Result ( 1-50 ) Documents found: 59 Search criteria Search scope: Stage code: Current stage only Date stage reached: Last year Committee: TC 22 Refine your query and search again Search results by ISO number ISO 2575:2004/Amd 1:2005 Ed. 4 Current stage TC 22/SC 13 ISO 2974:2005 Ed. 6 Current stage TC 22/SC 7 Diesel engines -- High-pressure fuel injection pipe end-connections with 60 degrees female cone ISO :2005 Ed. 2 Current stage TC 22/SC 3 Road vehicles -- Multi-core connecting cables -- Part 1: Test methods and requirements for basic performance sheathed cables ISO 4925:2005 Ed. 2 Current stage TC 22/SC 2 Road vehicles -- Specification of non-petroleum-base brake fluids for hydraulic systems ISO 4927:2005 Ed. 2 Current stage TC 22/SC 2 Road vehicles -- Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) ISO 6117:2005 Ed. 2 Current stage TC 22/SC 2 Road vehicles -- Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) ISO 6415:2005 Ed. 3 Current stage TC 22/SC 7 Internal combustion engines -- Spin-on filters for lubricating oil -- Dimensions (available in English only) ISO :2005 Ed. 1 Current stage TC 22/SC 1 Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 4: M8 x 1 glow-plugs ISO 6597:2005 Ed. 4 Current stage TC 22/SC 2 Road vehicles -- Hydraulic braking systems, including those with electronic control functions, for motor vehicles -- Test procedures ISO :2005 Ed. 2 Current stage TC 22 Internal combustion engines -- Piston rings -- Part 5: Quality requirements (available in English only) ISO 6856:2005 Ed. 3 Current stage TC 22/SC 1
2 Seite 2 von 4 Road vehicles -- Unscreened high-voltage ignition cable assemblies -- Test methods and general requirements ISO 7141:2005 Ed. 3 Current stage TC 22/SC 19 Road vehicles -- Light alloy wheels -- Impact test ISO :2005 Ed. 4 Current stage TC 22/SC 3 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions, test methods and general performance requirements (available in English only) ISO 8705:2005 Ed. 2 Current stage TC 22/SC 23 Mopeds -- Measurement method for location of centre of gravity (available in English only) ISO 8713:2005 Ed. 2 Current stage TC 22/SC 21 Electric road vehicles -- Vocabulary ISO :2005 Ed. 2 Current stage TC 22/SC 3 Road vehicles -- Fuse-links -- Part 2: User's guide ISO 9130:2005 Ed. 2 Current stage TC 22/SC 22 Motorcycles -- Measurement method for location of centre of gravity (available in English only) ISO :1997/Cor 1:2005 Ed. 1 Current stage TC 22 ISO 11157:2005 Ed. 2 Current stage TC 22/SC 2 Road vehicles -- Brake lining assemblies -- Inertia dynamometer test method ISO 11406:2001/Cor 1:2005 Ed. 1 Current stage TC 22/SC 15 ISO :2005 Ed. 3 Current stage TC 22/SC 3 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology ISO :2005 Ed. 3 Current stage TC 22/SC 3 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources ISO :2005 Ed. 3 Current stage TC 22/SC 3 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology ISO :2005 Ed. 3 Current stage TC 22/SC 3 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI) ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 4: Diagnostics ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 1: Definitions, symbols and general considerations ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 2: Definition of impact conditions in
3 Seite 3 von 4 relation to accident data ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 3: Motorcyclist anthropometric impact dummy ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 4: Variables to be measured, instrumentation and measurement procedures ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 5: Injury indices and risk/benefit analysis ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 6: Full-scale impact-test procedures ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests ISO :2005 Ed. 2 Current stage TC 22/SC 22 protective devices fitted to motorcycles -- Part 8: Documentation and reports (available in English only) ISO 13296:2005 Ed. 2 Current stage TC 22/SC 7 Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions ISO 14400:2005 Ed. 1 Current stage TC 22/SC 19 Road vehicles -- Wheels and rims -- Use, general maintenance and safety requirements and out-of-service conditions ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Communication between vehicle and external equipment for emissionsrelated diagnostics -- Part 4: External test equipment ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Communication between vehicle and external equipment for emissionsrelated diagnostics -- Part 6: Diagnostic trouble code definitions ISO 15172:2005 Ed. 1 Current stage TC 22/SC 19 Road vehicles -- Wheels -- Nut seat strength tests ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Diagnostics on Controller Area Networks (CAN) -- Part 4: Requirements for emissions-related systems ISO :2005 Ed. 1 Current stage TC 22/SC 12 male side-impact dummy -- Part 1: Terminology and rationale ISO :2005 Ed. 1 Current stage TC 22/SC 12 male side-impact dummy -- Part 2: Mechanical subsystems ISO :2005 Ed. 1 Current stage TC 22/SC 12
4 Seite 4 von 4 male side-impact dummy -- Part 3: Electronic subsystems ISO :2005 Ed. 1 Current stage TC 22/SC 12 male side impact dummy -- Part 4: User's manual ISO :2005 Ed. 1 Current stage TC 22/SC 13 - Part 1: General description, basic requirements ISO :2005 Ed. 1 Current stage TC 22/SC 13 - Part 2: Visibility ISO :2005 Ed. 1 Current stage TC 22/SC 13 - Part 3: Information devices and controls ISO :2005 Ed. 1 Current stage TC 22/SC 13 - Part 4: Cabin environment ISO 16246:2005 Ed. 1 Current stage TC 22/SC 1 Road vehicles -- M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing ISO/TR 16352:2005 Ed. 1 Current stage TC 22/SC 13 Road vehicles -- Ergonomic aspects of in-vehicle presentation for transport information and control systems -- Warning systems ISO :2001/Cor 1:2005 Ed. 1 Current stage TC 22/SC ISO ISO name and logo Privacy policy
5 Search Result ( ) Seite 1 von 2 Search Result ( ) Documents found: 61 Search criteria Search scope: Stage code: Date stage reached: Last year Committee: TC 22 Refine your query and search again Search results by ISO number ISO/TR 16352:2005 Ed. 1 Current stage TC 22/SC 13 Road vehicles -- Ergonomic aspects of in-vehicle presentation for transport information and control systems -- Warning systems ISO :2001/Cor 1:2005 Ed. 1 Current stage TC 22/SC 3 ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Open interface for embedded automotive applications -- Part 1: General structure and terms, definitions and abbreviated terms ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Open interface for embedded automotive applications -- Part 2: OSEK/VDX specifications for binding OS, COM and NM ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Open interface for embedded automotive applications -- Part 3: OSEK/VDX Operating System (OS) ISO :2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Open interface for embedded automotive applications -- Part 4: OSEK/VDX Communication (COM) ISO 17373:2005 Ed. 1 Current stage TC 22/SC 10 Road vehicles -- Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact ISO 21848:2005 Ed. 1 Current stage TC 22/SC 3 Road vehicles -- Electrical and electronic equipment for a supply voltage of 42 V -- Electrical loads ISO/PAS :2005 Ed. 1 Current stage TC 22/SC 5 Diesel engines -- NOx reduction agent AUS Part 1: Quality requirements (available in English only) ISO/PAS :2005 Ed. 1 Current stage TC 22/SC 5 Diesel engines -- NOx reduction agent AUS Part 2: Test methods (available in English only) ISO 22977:2005 Ed. 1 Current stage TC 22/SC 1
6 Search Result ( ) Seite 2 von 2 Road vehicles -- M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing 1 2 ISO ISO name and logo Privacy policy
Tools and Techniques for Ensuring Automotive EMC Performance and Reliability
Tools and Techniques for Ensuring Automotive EMC Performance and Reliability Todd Hubing Michelin Professor of Vehicular Electronics Clemson University Automobiles are Complex Electronic Systems Navigation
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13232-1 Second edition 2005-12-15 Motorcycles Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 1: Definitions,
More informationAn Overview of Automotive EMC Standards & Emerging Requirements
An Overview of Automotive EMC Standards & Emerging Requirements 2015. 5. 29 Korea Automobile Testing & Research Institute (KATRI) TOPICs 1. Automotive Electronics of the Future 2. Automotive EMC Standards
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13232-3 Second edition 2005-12-15 Motorcycles Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 3: Motorcyclist
More informationRoad vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 28741 Second edition 2013-11-15 Road vehicles Spark-plugs and their cylinder head housings Basic characteristics and dimensions Véhicules routiers
More informationISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems
INTERNATIONAL STANDARD ISO 26867 First edition 2009-07-01 Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems Véhicules routiers Matériaux de friction
More informationProvläsningsexemplar / Preview
SVENSK STANDARD Fastställd 2005-04-01 Utgåva 3 Vägfordon Elstörningar från smalbandsemission av elektromagnetisk energi Provningsmetoder för komplett fordon Del 2: Yttre strålningskällor (ISO 11451-2:2005,
More informationISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge
INTERNATIONAL STANDARD ISO 10605 First edition 2001-12-15 Road vehicles Test methods for electrical disturbances from electrostatic discharge Véhicules routiers Méthodes d'essai des perturbations électriques
More informationPart 11: Wheelchairs. Test dummies
INTERNATIONAL STANDARD ISO 7176-11 Second edition 2012-12-01 Wheelchairs Part 11: Test dummies Fauteuils roulants Partie 11: Mannequins d essai Reference number ISO 2012 COPYRIGHT PROTECTED DOCUMENT ISO
More informationISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Product definition and quality assurance
INTERNATIONAL STANDARD ISO 15484 First edition 2008-08-01 Road vehicles Brake lining friction materials Product definition and quality assurance Véhicules routiers Matériaux de friction pour garnitures
More informationISO,ISO standard, ISO code, ISO, ISO English version,iso Chinese version,iso Chinese translation,iso,iso, ISO translation,
ISO 8092-2:2005, Road Vehicles - Connections For On-board Electrical Wiring Harnesses - Part 2: Definitions, Test Methods And General Performance Requirements By ISO/TC 22/SC 3 ISO,ISO standard, ISO code,
More informationav elektromagnetisk energi Provningsmetoder för komplett fordon Del 2: Yttre strålningskälla
SVENSK STANDARD SS-ISO 11451-2 Fastställd 2001-11-16 Utgåva 2 Vägfordon Elstörningar från smalbandsemission av elektromagnetisk energi Provningsmetoder för komplett fordon Del 2: Yttre strålningskälla
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15829 Second edition 2013-06-15 Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation Véhicules routiers
More informationLIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 29 th February Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 4. AIS-002 Automotive Vehicles - Rear - View Mirrors Specification
More informationLIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 16 th December Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on Amd. 2 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 Automotive Vehicles - Rear - View Mirrors Specification
More informationISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie
INTERNATIONAL STANDARD ISO 9129 Second edition 2008-05-15 Motorcycles Measurement methods for moments of inertia Motocycles Méthodes de mesure des moments d'inertie Reference number ISO 2008 PDF disclaimer
More informationQC/T Translated English of Chinese Standard: QC/T AUTOMOTIVE INDUSTRY STANDARD
QC/T 198- Translated English of Chinese Standard: QC/T198- www.chinesestandard.net Sales@ChineseStandard.net QC ICS 43.040.10 AUTOMOTIVE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA T 36 QC/T 198-
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7637-3 Third edition 2016-07-01 Road vehicles Electrical disturbances from conduction and coupling Part 3: Electrical transient transmission by capacitive and inductive coupling
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11992-1 Second edition 2003-04-15 Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical layer and data-link
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-2 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty
More informationSVENSK STANDARD SS-ISO :2004
SVENSK STANDARD Fastställd 2004-12-10 Utgåva 1 Vägfordon Kommunikation mellan fordon och extern utrustning för emissionsrelaterad diagnostik Del 3: Diagnostikanslutning och tillhörande elektrisk krets:
More information[TO BE PUBLISHED IN THE GAZETTE OF INDIA, PART-II, SECTION-3, SUB-SECTION (ii)]
[TO BE PUBLISHED IN THE GAZETTE OF INDIA, PART-II, SECTION-3, SUB-SECTION (ii)] Ministry of Consumer Affairs, Food and Public Distribution (Department of Consumer Affairs) BUREAU OF INDIAN STANDARDS New
More informationELECTRICAL AND ELECTRONIC SYSTEMS.
ELECTRONIC SYS. 114 115 116 118 119 120 121 Automotive Complete Electric Components 114 Automotive Complete Electric Components With Fault With Student Examination S/W tsssweexamination S/W Electric Kits
More informationISO Wheelchairs Part 28: Requirements and test methods for stairclimbing
INTERNATIONAL STANDARD ISO 7176-28 First edition 2012-10-01 Wheelchairs Part 28: Requirements and test methods for stairclimbing devices Fauteuils roulants Partie 28: Exigences et méthodes d essai pour
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12405-3 First edition 2014-05-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 3: Safety performance requirements
More informationSr. No. AIS No.` and its Amendment/s. Title
LIST OF PUBLISHED AUTOMOTIVE INDUSTRY STANDARDS (Updated on March 22, 2019) AISC standards are available on this website only for reference. AISC Secretariat at ARAI reserves copy right for reproduction/
More informationPIEZO ELECTRIC CONTROL HYDRAULIC STACKS FOR THE CAMLESS ENGINE
PIEZO ELECTRIC CONTROL HYDRAULIC STACKS FOR THE CAMLESS ENGINE PROJECT REFERENCE NO. : 37S0751 COLLEGE : BASAVAKALYAN ENGINEERING COLLEGE, BIDAR BRANCH : MECHANICAL ENGINEERING GUIDE : SANTOSH PATIL STUDENTS
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13988 First edition 2008-08-01 Passenger vehicle wheels Clip balance weight and rim flange nomenclature, test procedures and performance requirements Roues pour véhicules particuliers
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2)(b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-4 Second edition 2007-12-15 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state test cycles for different engine applications Moteurs
More informationISO INTERNATIONAL STANDARD. Wheelchairs Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
INTERNATIONAL STANDARD ISO 7176-10 Second edition 2008-11-01 Wheelchairs Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs Fauteuils roulants Partie 10: Détermination
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationDraft Technical Report. Fuel consumption, External Electrical Consumption and Maximum speed measurement.
Draft Technical Report Energy and Operation Performance of Hydrogen (H 2 ) fuelled Vehicles Rev. 1 of the draft report: Fuel consumption, External Electrical Consumption and Maximum speed measurement.
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T19751-2005 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.080.01 T 47 GB/T 19751-2005 Hybrid
More informationISO INTERNATIONAL STANDARD. Mopeds Methods for setting the running resistance on a chassis dynamometer
INTERNATIONAL STANDARD ISO 28981 First edition 2009-11-01 Mopeds Methods for setting the running resistance on a chassis dynamometer Cyclomoteurs Méthodes pour fixer la résistance à l'avancement sur un
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1317-8 April 2012 ICS 13.200; 93.080.30 English Version Road restraint systems - Part 8: Motorcycle road restraint systems
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21069-1 First edition 2004-11-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 1: Pneumatic
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7176-21 Second edition 2009-04-01 Wheelchairs Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery
More informationReavis High School Curriculum Snapshot/Cover Page for Auto Mechanics I
Reavis High School Curriculum Snapshot/Cover Page for Auto Mechanics I Unit 1: Safety in the Automotive Shop 8 # of The student will learn general safety in the Automotive Shop. The student will also learn
More informationISO INTERNATIONAL STANDARD. Wheelchair seating Part 4: Seating systems for use in motor vehicles
INTERNATIONAL STANDARD ISO 16840-4 First edition 2009-03-15 Wheelchair seating Part 4: Seating systems for use in motor vehicles Sièges de fauteuils roulants Partie 4: Systèmes d'assise dans les véhicules
More informationHydraulic fluid power Dimensions and requirements of quick-action couplings
INTERNATIONAL STANDARD ISO 7241 First edition 2014-07-15 Hydraulic fluid power Dimensions and requirements of quick-action couplings Transmissions hydrauliques Dimensions et exigences des raccords rapides
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationAS/NZS ISO :2013
ISO 7176-28:2012, IDT Australian/New Zealand Standard Wheelchairs Part 28: Requirements and test methods for stair-climbing devices AS/NZS ISO 7176.28:2013 This Joint Australian/New Zealand Standard was
More informationHydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose
INTERNATIONAL STANDARD ISO 14541 First edition 2013-03-15 Hydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose Transmissions hydrauliques Dimensions
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
More informationISO INTERNATIONAL STANDARD. Wheelchairs Part 24: Requirements and test methods for useroperated stair-climbing devices
INTERNATIONAL STANDARD ISO 7176-24 First edition 2004-10-15 Wheelchairs Part 24: Requirements and test methods for useroperated stair-climbing devices Fauteuils roulants Partie 24: Exigences et méthodes
More informationAUTOMOTIVE EMC TEST HARNESSES: STANDARD LENGTHS AND THEIR EFFECT ON RADIATED EMISSIONS
AUTOMOTIVE EMC TEST HARNESSES: STANDARD LENGTHS AND THEIR EFFECT ON RADIATED EMISSIONS Martin O Hara Telematica Systems Limited, Trafficmaster, University Way, Cranfield, MK43 0TR James Colebrooke Triple-C
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 24347 First edition 2005-11-01 Agricultural vehicles Mechanical connections between towed and towing vehicles Dimensions of ball-type coupling device (80 mm) Véhicules agricoles
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. QC/T Translated English of Chinese Standard: QC/T
Translated English of Chinese Standard: QC/T970- www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net AUTOMOTIVE INDUSTRY STANDARD QC OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.060.20
More informationMAKE OF AUTOMOBILE: PISTON DISPLACEMENT: 1300
MAKE OF AUTOMOBILE: TYPE: YARIS PISTON DISPLACEMENT: 1300 NUMBER OF VALVES: 16 VVT-I ENGINE NUMBER: 2SZ-FE TRANSMISSION TYPE ( MT / AT ) AT VEHICLE CATEGORIES M or N M TYPE VSI INJECTOR ( NUMBER + COLOR
More informationMISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE
MISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE 1. Course Title: Basic Car Care 2. CBEDS Title: Automotive Mechanics 3. CBEDS Number: 5655 4. Job Titles/DOT
More information1. Rider s seat, heated 1 off 3. Switch, heated seat 1 off 2. Harness, rider s seat 1 off
English Fitting Instructions: Tiger Explorer and Tiger Explorer XC A970894 and A970898 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven
More informationBackground. Voltage Transient Emission Setup Requirement. Transient Immunity Setup up Requirement Performance Criteria ISO :2004.
ISO 7637-2:2004 Voltage Transient Emission Setup Requirement Transient Immunity Setup up Requirement Performance Criteria emitel AG Ohmstrasse1 94342 Strasskirchen GERMANY November 2008 Page 2 of 25 ISO
More informationTECHNICAL MANUAL OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TECHNICAL MANUAL OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) INTRODUCTION 1-1 OPERATING INSTRUCTIONS 2-1 OPERATOR MAINTENANCE
More informationMAKE OF AUTOMOBILE: 316 / 318i E46 NUMBER OF VALVES:
MAKE OF AUTOMOBILE: TYPE: 316 / 318i E46 PISTON DISPLACEMENT: 1800 2000 cc NUMBER OF VALVES: 16V ENGINE NUMBER: N42B18A / N42B20A TRANSMISSION TYPE ( MT / AT ) MT VEHICLE CATEGORIES M or N M TYPE VSI INJECTOR
More informationHydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic ports
ISO 2017 All rights reserved ISO/TC 131/SC N Date: 2017-08-18 ISO/PDTR 10946 ISO/TC 131/SC /WG 1 Secretariat: AFNOR Hydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic
More informationTHUMS User Community
THUMS User Community Therese Fuchs, Biomechanics Group, Institute of Legal Medicine, University of Munich therese.fuchs@med.uni-muenchen.de, tel. +49 89 2180 73365 Munich, 9th of April 2014 Agenda 1. What
More informationD1.3 FINAL REPORT (WORKPACKAGE SUMMARY REPORT)
WP 1 D1.3 FINAL REPORT (WORKPACKAGE SUMMARY REPORT) Project Acronym: Smart RRS Project Full Title: Innovative Concepts for smart road restraint systems to provide greater safety for vulnerable road users.
More informationDTC B1140/32 Side Airbag Sensor Assy (RH) Malfunction
DI428 DIAGNOSTICS DI9HU01 DTC B1140/32 Side (RH) Malfunction CIRCUIT DESCRIPTION The side airbag sensor assy (RH) consists of the safing sensor, diagnosis circuit and lateral deceleration sensor, etc.
More informationIntegrated. Safety Handbook. Automotive. Ulrich Seiffert and Mark Gonter. Warrendale, Pennsylvania, USA INTERNATIONAL.
Integrated Automotive Safety Handbook Ulrich Seiffert and Mark Gonter INTERNATIONAL. Warrendale, Pennsylvania, USA Table of Contents Preface ix Chapter 1 The Need to Increase Road Safety 1 1.1 Introduction
More informationMODEL YEAR: 2009 SYSTEM APPROVAL NUMBER ( R115 ) R ENGINE SET NUMBER 350/
MAKE OF AUTOMOBILE: TYPE: PRIORA 2170 / 2172 PISTON DISPLACEMENT: 1600 NUMBER OF VALVES: 16 ENGINE NUMBER: 21126 TRANSMISSION TYPE ( MT / AT ) MT VEHICLE CATEGORIES M or N M TYPE VSI INJECTOR (COLOR )
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10542-2 First edition 2001-07-15 Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 2: Four-point strap-type
More informationIndividual ignition coil system,
Page 1 of 11 28-17 Individual ignition coil system, checking Ignition coils, checking Notes: Measuring the primary resistance of the ignition coils is normally not necessary for this test (primary resistance
More informationas a fuel for mobility introduction of Regulations and homologation aspects linked to the
BONG-HY (parallel application of Blends Of Natural Gas and HYdrogen in internal combustion engines and fuel cells) Regulations and homologation aspects linked to the introduction of of blends of hydrogen
More informationEvaluation of Visibility From Powered Industrial Trucks
ANSI/ITSDF B56.11.6-2005 (Reaffirmation of ASME B56.11.6 1992) Evaluation of Visibility From Powered Industrial Trucks AN AMERICAN NATIONAL STANDARD INDUSTRIAL TRUCK STANDARDS DEVELOPMENT FOUNDATION A
More informationLateral Protection Device
V.5 Informal document GRSG-113-11 (113th GRSG, 10-13 October 2017, agenda item 7.) Lateral Protection Device France Evolution study on Regulation UNECE n 73 1 Structure Accidentology analysis Regulation
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13948-1 Second edition 2015-08-15 Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 1: Threaded connections Moteurs diesels Raccords basse pression
More informationAUTOMOTIVE TECHNOLOGY (AUTO)
Automotive Technology (AUTO) 1 AUTOMOTIVE TECHNOLOGY (AUTO) AUTO 100 Automotive Technology and Maintenance for the Consumer 3 Units (AA/AS; CSU) 54 lecture hours, 18 lab hours Intended for non-majors.
More informationJob Ready Assessment Blueprint
Blueprint Test Code: 4209/ Version: 01 Automotive Technician Core Specific Competencies and Skills Tested in this Assessment: Brakes (NATEF A-5) Diagnose and repair hydraulic systems Diagnose and repair
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21069-2 First edition 2008-05-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 2: Air
More informationIMIEV3 Service and repair non-live electric and hybrid vehicle systems
Service and repair non-live electric and hybrid vehicle systems Overview This unit covers the competence and knowledge technicians need to carry out servicing and general repairs on non-live high energy
More informationUse of Madymo for Simulations of Helicopter Crash Scenarios within the HeliSafe TA Project
Use of Madymo for Simulations of Helicopter Crash Scenarios within the HeliSafe TA Project M. Blundell., Bastien C., S. Vadlamudi and Y. Zhang Coventry University 6 th European Madymo Users meeting, Berlin
More informationISO INTERNATIONAL STANDARD. Hoists for the transfer of disabled persons Requirements and test methods
INTERNATIONAL STANDARD ISO 10535 Second edition 2006-12-15 Hoists for the transfer of disabled persons Requirements and test methods Lève-personnes pour transférer des personnes handicapées Exigences et
More informationMAKE OF AUTOMOBILE: TYPE: V 70 PISTON DISPLACEMENT: 2521 NUMBER OF VALVES:
MAKE OF AUTOMOBILE: TYPE: V 70 PISTON DISPLACEMENT: 2521 NUMBER OF VALVES: 20V ENGINE NUMBER: B5254T TRANSMISSION TYPE ( MT / AT ) AT VEHICLE CATEGORIES M or N PASSENGER CAR ( M ) TYPE VSI INJECTOR (COLOUR
More informationBore and stroke 84 x 100 mm 3.3 x 3.9 in Displacement 2.2 litres 135 in 3
The Syncro 2.2 engine is the newest member of the highly successful Perkins 400 Series and has been designed to help our customers meet current emissions standards in North America. The engine is a 4-cylinder,,
More informationMAKE OF AUTOMOBILE: MODEL YEAR: 2007 SYSTEM APPROVAL NUMBER ( R115 ) VSI-LPG 10 ENGINE SET NUMBER 364/
MAKE OF AUTOMOBILE: TYPE: FABIA PISTON DISPLACEMENT: 1400 NUMBER OF VALVES: 16 ENGINE NUMBER: BUD TRANSMISSION TYPE ( MT / AT ) MT VEHICLE CATEGORIES M or N M TYPE VSI INJECTOR ( NUMBER + COLOR ) 180/30410
More informationDTC B1156/B1157/15 Front Airbag Sensor (RH) Malfunction
DI309 DI6PW03 DTC B1156/B1157/15 Malfunction CIRCUIT DESCRIPTION The front airbag sensor (RH) circuit consists of the airbag sensor assembly and front airbag sensor (RH). For details of the function of
More information36,000 lb. Forklift Chassis Flipper Sect. 4 - Equipment Specification Page 1 of 6
4.0 SCOPE OF WORK: A. Work includes, but is not limited to, providing all labor, materials, equipment, and services required for the design, manufacture, fabrication, assembly, sandblasting, painting,
More informationIEC TC SC E 22 F G H (UPS) A 77 B C khz 77A JIS C , A B JIS C JIS C 2136 (1/8)
2 15 22 77 85 112 27 11 12 () 1 1 IEC TC SC 2 2 15 15 22 E 22 F G H (UPS) 77 A 77 B C 85 85 112 112 JIS JIS 2 2 22 77A JIS C 61000-4-16, -34 77B JIS C 61000-4-6 112 JIS C 2136 4 16 150 khz 4-34 16 A 4-6
More informationISO INTERNATIONAL STANDARD. Tools for moulding Tool specification sheet for diecasting dies
INTERNATIONAL STANDARD ISO 24233 First edition 2008-02-15 Tools for moulding Tool specification sheet for diecasting dies Outillage de moulage Formulaire de spécifications d'outils pour moules pour fonderie
More informationISO INTERNATIONAL STANDARD. Metallic tube connections for fluid power and general use Part 6: 60 cone connectors with or without O-ring
INTERNATIONAL STANDARD ISO 8434-6 First edition 2009-08-15 Metallic tube connections for fluid power and general use Part 6: 60 cone connectors with or without O-ring Raccordements de tubes métalliques
More informationAST3-CT HeliSafe TA. Helicopter Occupant Safety Technology Application. Publishable Final Activity Report
AST3-CT-2004-502727 HeliSafe TA Helicopter Occupant Safety Technology Application Specific Targeted Research Project Aeronautics and Space Publishable Final Activity Report Period covered: 01/03/2006 to
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. QCT Translated English of Chinese Standard: QC/T
Translated English of Chinese Standard: QC/T791-2007 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL AUTOMOTIVE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA QC ICS 43.140 T 80 QC/T 791-2007
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13044-2 First edition 2013-08-15 Road vehicles Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations Part 2: 50 mm fifth wheel couplings Electrical
More informationp max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
More informationWorldSID 50 th Update
Informal Document No. GRSP-44-33 (44th session, 10-12 December 2008, agenda item 5(a)) PDB - Partnership for Dummy Technology and Biomechanics on behalf of the WorldSID Task Group 44 th GRSP Session Geneva,
More informationIndustrial Mechanic (Millwright) Level 3
Industrial Mechanic (Millwright) Level 3 Rev. September 2005 Industrial Mechanic (Millwright) Unit: G5 Prime Movers I Diesel 1 Level: Duration: Three 60 hours Theory: 20 hours Practical: 40 hours Overview:
More informationPart 1: Basic requirements
INTERNATIONAL STANDARD ISO 10326-1 Second edition 2016-10-15 Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements Vibrations mécaniques Méthode en laboratoire
More informationAll cores due 30 days after invoice date - no credit after 60 days.
NO WARRANTY STATEMENT High performance parts & products no warranty policy: The purchaser understands and recognizes that high performance diesel products and services sold by INDUSTRIAL INJECTION SERVICE.
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10542-1 Second edition 2012-10-01 Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test
More information403D-17 Industrial Diesel Engine
The Perkins 400 Series is an extensive family of engines in the 0.5-2.2 litre range. The 3 cylinder 403-17 model is a mid-range 400 Series engine, combining performance, low operating costs and a compact
More information403D-15 Industrial Diesel Engine
The Perkins 400 Series is an extensive family of engines in the 0.5-2.2 litre range. The 3 cylinder 403-15 model is the mid-range 400 Series engine, combining performance, low operating costs and a compact
More informationISO INTERNATIONAL STANDARD. Road vehicles Tachograph systems Part 5: Secured CAN interface
INTERNATIONAL STANDARD ISO 16844-5 First edition 2004-08-01 Road vehicles Tachograph systems Part 5: Secured CAN interface Véhicules routiers Systèmes tachygraphes Partie 5: Interface CAN sauvegardée Reference
More informationDevelopment of a Finite Element Model of a Motorcycle
Development of a Finite Element Model of a Motorcycle N. Schulz, C. Silvestri Dobrovolny and S. Hurlebaus Texas A&M Transportation Institute Abstract Over the past years, extensive research efforts have
More informationMODEL YEAR: SYSTEM APPROVAL NUMBER ( R115 ) R ENGINE SET NUMBER 354/
MAKE OF AUTOMOBILE: MERECEDES TYPE: E200 W211 PISTON DISPLACEMENT: 1796 NUMBER OF VALVES: 16 ENGINE NUMBER: M271 TRANSMISSION TYPE ( MT / AT ) AT VEHICLE CATEGORIES M or N M TYPE VSI INJECTOR ( NUMBER
More informationISO 8665 INTERNATIONAL STANDARD. Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations
INTERNATIONAL STANDARD ISO 8665 Third edition 2006-06-01 Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations Petits navires Moteurs marins de propulsion
More information