[TO BE PUBLISHED IN THE GAZETTE OF INDIA, PART-II, SECTION-3, SUB-SECTION (ii)]
|
|
- Violet Lindsey Garrison
- 5 years ago
- Views:
Transcription
1 [TO BE PUBLISHED IN THE GAZETTE OF INDIA, PART-II, SECTION-3, SUB-SECTION (ii)] Ministry of Consumer Affairs, Food and Public Distribution (Department of Consumer Affairs) BUREAU OF INDIAN STANDARDS New Delhi, Dated 09/06/2015 EXTRAORDINARY NOTIFICATION In pursuance of clause (b) of sub-rule (1) of Rule 7 of the Bureau of Indian Standards Rules, it is, hereby notified that the Indian Standard, particulars of which are given in the second column of the Schedule hereto annexed has been cancelled on the date against it in the third column and stands withdrawn. THE SCHEDULE Sl. No. and Year of the Indian Standards Date of Cancellation No. cancelled (1) (2) (3) 1 IS 6600 : 1972 Guide for loading of oil immersed transformers 2 IS 1448 (Part 17) : 1960 Methods of test for 17 September 2014 petroleum and its products: Part 17 Diesel index 3 IS 1448 (Part 36) : 1960 Methods of test for 17 September 2014 petroleum and its products: Part 36 Sulphur mercaptans 4 IS 1448 (Part 47) : 1962 Methods of test for 17 September 2014 petroleum and its products: Part 47 Knock characteristics of high performance fuels by extended motor method 5 IS 830 : 1985 Tennis racket frames (third 17 September 2014 revision) 6 IS 13360(Part 8/Sec 2) : 2004/ ISO 976 : 17 September Plastics - Methods of testing Part 8 permanence/ chemical properties Section 2 Polymer dispersions and Rubber Lattices - Determination of ph (First 7 IS : 2002/ISO 3442 : 1991 Self centering chucks for machine tools with two piece jaws (tongue and groove type) Sizes for interchangeability and acceptance test
2 specifications 8 IS : 1987 Code for lubrication symbols 9 IS : 2005/ISO/TR 7239 : 1984 Development and Principles for application of public information symbols 10 IS 7745 : 1975 Dimensions for lubrication holes, grooves and bore reliefs 11 IS : 2003 /ISO/TR : 1991 Industrial automation systems and integration operating conditions for discrete part manufacturing Equipment in industrial environments 12 IS : 2001/ ISO/TR : 1995 Manipulating industrial robots Intermediate code for robot (ICR) 13 IS 1890 (Part 11) : 1992 Quantities and units Part 11 Mathematical signs and symbols to be used in the natural sciences and technology (Second Revisions) 14 IS 1890(Part 1) : 1992 Quantities and units : Part 1 Space and Time (Third revision) 15 IS 1890 (Part 0 ) : 1992 Quantities and units : Part 0 General principles (First 16 IS : 2002/ISO 3442 : 1991 Self centering chucks for machine tools with two piece jaws (tongue and groove type) Sizes for interchangeability and acceptance test specifications 17 IS : 1994 SI units and recommendations for the Use of their multiples and certain other units (Second 18 IS 7089 : 1973 Specification for Limited supply plugs 19 IS/ISO : 1994 Technical drawings Corners Vocabulary and indication on drawings 20 IS 2200 (Part 3) : 2004 /ISO : 1997 Test condition for milling machines with table of variable height Testing of accuracy Part 3: Machines with vertical spindle 21 IS 3317 : 2004 Hypodermic needles, 27 May 2014 Reusable type Specification 22 IS : 2001 /ISO : May 2014
3 Neurosurgical implants Marking and packaging of implantable neural stimulators. 23 IS : 1993 /ISO 7930 : 1986 Wheelchairs Type classification based on appearance characteristics 24 IS 3949 : 1971 Dimensions for screw threads for lamp used in laryngoscope. 25 IS (Part 1) : 2001 Automotive vehicles- Brakes and braking systems Part 1 Terminology (First 26 IS (Part 2) : 2001 Automotive vehicles- Brakes and braking systems Part 2 General functions and features (First 27 IS (Part 3) : 2001 Automotive vehicles- Brakes and braking systems Part 3 Performance requirements and evaluation (First 28 IS (Part 4) : 2001 Automotive vehicles- Brakes and braking systems Part 4 Compressed air and air assisted brakes Special requirements (First 29 IS (Part 5) : 2001/ISO 3853 : 1984 Automotive vehicles- Brakes and braking systems Part 5 Compressed air and air assisted brakes Pressure test connections (First 30 IS (Part 6) : 2001 Automotive vehicles- Brakes and braking systems Part 6 Vacuum braking systems Special requirements (First 31 IS (Part 7) : 2001 Automotive vehicles- Brakes and braking systems Part 7 Inertia dynamometer test method for brake lining (First 32 IS (Part 8) : 2001 Automotive vehicles- Brakes and braking systems Part 8 Test procedures (First 33 IS (Part 9) : 2003 Automotive vehicles- Brakes and braking systems Part 9 Requirements for vehicles equipped with anti-lock braking systems 34 IS : 1993 / ISO Automotive vehicle - Reference volume - Luggage compartment of passenger cars -Method of measurement 27 May May 2014
4 35 IS 9226 : 1979 /ISO 2416 : 1976 Recommendations for load distribution for passenger cars 36 IS 9237 : 1979 / ISO 2575 : 2000 Symbols for controls, indicators and tell tales for road vehicles 37 IS : 1994 / ISO 3779 : 1983 Automotive vehicles - Identification numbering system Recommendations 38 IS 9384 : 1979 / ISO 6359 : July 2014 Specification for consolidated data plate for freight containers 39 IS (Part 2) : 1993 /ISO : July 2014 Freight containers Information related to containers on board vessels: Part 2 Telex data transmission 40 IS : 1988 Specification for bicycle 15 July 2014 hub assembly PH type 41 IS 8150 : 1997 Shipbuilding 45-litre 15 July 2014 capacity chemical foam type fire engine for marine use Specification (First 42 IS 7617 : 1984 Code of practice for maintenance of forks for forklift truck 43 IS : 1996 Packaging - Packaging of 16 July 2014 TV picture tubes/computer monitor tubes Code of practice 44 IS 3613 : 1974 Acceptance test for wire flux combination for submerge arc welding (First 45 IS 7280 : 1974 Bare wire electrodes for submerge arc welding of structural steels 46 IS 2381(Part 2) : 2009/ ISO : 1997 Information and Documentation - Bibliographic references : Part 2 Electronic documents or parts thereof (Second 47 IS : 1999/ ISO 2788 : 1986 Documentation - Guidelines for the establishment and development of monolingual thesauri 48 IS : 2001/ISO 6536 : 1981 Bank operations- Standard scheme for drawing lists 49 IS 1448 (Part 1) : 1971 Neutralization Number by Potentiometric Titration - Part 1 50 IS 1448 (Part 10) : 1970 Methods of test for
5 petroleum and its products Part 10: Cloud point and pour point 51 IS 1448 (Part 55) :1963 Methods of test for petroleum and its products: Part 55 Saponification value, saponifiable and unsaponifiable matter 52 IS : 2003 Natural Gas - Designation of the Quality of Natural Gas for Use as a Compressed Fuel for Vehicles 53 IS 4639 : 1968 Glossary Of Petroleum Terms 54 IS : 1996 Lubricants for Two-stroke Spark Ignition Air-cooled Gasoline Engines 55 IS 8904 : 1997 Anthrarufin 56 IS 8941 : 1997 Chrysazin 57 IS 7190 : 1974 Methods of determination of bulk density of coke 58 IS 2904 : 1998 Ball handles Specification (First 59 IS : 2000/ISO 6261 : 1995 Boring bars (Tool holders with cylindrical shank) for indexable inserts-designation 60 IS 2975 : 1998 Control levers with ball grips Specification (First R evision) 61 IS 5091 : 1969 Dimensions for circular base plates 62 IS 5097 : 1969 Dimensions for diamond locating studs 63 IS 5096 : 1969 Dimensions for round locating studs 64 IS 5092 : 1969 Dimensions for square and rectangular base plates 65 IS 5095 : 1998 End locating plugs Specification (First 66 IS 4279 : 1984 Goose neck clamps (Second 67 IS : 1997 Guidelines for technical evaluation of general purpose parallel lathes (First 68 IS 2908 : 1998 Hand cranks Specification (First 69 IS : 1984 Method of measuring noise from machine tools (excluding testing in anechoic chambers 70 IS 2996 : 1986 Mounting dimensions of plain grinding wheels by means of hub
6 flanges (Second 71 IS 5998 : 1984 Parallel sided clamp plates (First 72 IS (Part 1) : 1989 Press working tools Shanks Part 1 : General dimensions and survey 73 IS (Part 2) : 1989 Press working tools Shanks Part 2 : Shanks to suit rivetting 74 IS (Part 3) : 1989 Press working tools Shanks Part 3 : Shanks with screwed shaft 75 IS 12665(Part 4) : 1989 Press working tools Shanks Part 4 : Shanks with neck and collar 76 IS (Part 5) : 1996 Press working tools Shanks Part 5 : Shanks with square flanges 77 IS (Part 6) : 1996 Press working tools Shanks Part 6: Shanks with rectangular flanges 78 IS (Part 7) : 1996 Press working tools Shanks Part 7 : Shanks with screwed shaft and collar 79 IS 7227 : 1974 Recommended diameters of wheels for woodworking table band sawing machines 80 IS 7287 : 1974 Recommended working dimensions for woodworking machines 81 IS 7229 : 1974 Recommended working level heights for woodworking machines 82 IS 8099 : 1976 Sizes of collars for circular saw blades for woodworking machines 83 IS : 1989 Snap rings - Specification 84 IS 4292 : 1984 Strap clamps (First 85 IS 5250 : 1984 Swing clamps (First 86 IS 5999 : 1999 Swing lathes (First 87 IS 5251 : 1984 Table clamps (First 88 IS 2538 : 1963 Test chart for bench grinders 89 IS 8131 : 1976 Test chart for circular tables for machines tools (Table diameter upto 630mm)
7 90 IS 3405 : 1966 Test chart for power backsaw machines (up to 300mm round bar capacity) 91 IS 2310 : 1989 Test chart for shaping machines (First 92 IS 2308 : 1989 Test chart for slotting machines (First 93 IS : 1994 Test chart for universal milling machine with a swivelling table 94 IS 4293 : 1984 U-type clamps (Second 95 IS 5252 : 1984 Wide clamp plates (First Our Ref: PUB/GN-3 Date: 09/06/2015 Shri D.K. Nayyar Sc.-G&DDG(Standardization) Bureau of Indian Standards, ManakBhawan, 9, Bahadur Shah ZafarMarg, New Delhi
BEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationNAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No
SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas
More informationPARTS CATALOGUE. Rockford Motors inc.
PARTS CATALOGUE Rockford Motors inc. INSTRUCTIONS FOR USING THE PARTS CATALOGUE 1. This catalogue covers all the items of genuine parts and tools of BRIDGESTONE 350 GTR and 350 GTO motorcycles. 2. Please
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More informationSAFETY STANDARDS No. 12.1
SAFETY STANDARDS No. 12.1 [Central Motor Vehicle Rules, 1989, Notification S. O. No. 873 (E) dtd. 15.12.1997, item No. 19, of Ministry of Surface Transport]. Incorporating Amendment No.1/ March 2001 (
More informationOLEOIDRAULICA RACCOMANDAZIONI CETOP ELIMINATE & CORRISPONDENTI NORMATIVE ISO
OLEOIDRAULICA RACCOMANDAZIONI CETOP ELIMINATE & CORRISPONDENTI NORMATIVE ISO Rif/Data Titolo & Normativa(e) ISO collegata(e) R 6H 1979 Pipe couplings for hydraulic piping - coupling thread 1996 - see ISO
More informationRequirements for IC Engine Coolant Hoses
AUTOMOTIVE INDUSTRY STANDARD Requirements for IC Engine Coolant Hoses PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B.NO.832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY STANDARDS COMMITTEE
More informationANSI B Index
Index A Abrasive disc wheels... 16 17, 79, 99 mounting... 39 40, 94 Abrasive flap disc wheels... 23 Abrasive wheel... 1, 89 Portable air grinding machines... 26 Acceptance of shipment... 27 Actuating controls...
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationRequirements for Metallic Fuel Tanks of Automotive Vehicles
AUTOMOTIVE INDUSTRY STANDARD Requirements for Metallic Fuel Tanks of Automotive Vehicles PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY
More informationLatest publications September 2013
Latest publications September 2013 'Latest publications' lists the European Standards (EN), CEN Workshop Agreements (CWA), CEN Technical Specifications (CEN/TS) and CEN Technical Reports (CEN/TR) that
More informationMulti-Purpose Milling Machine
Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,
More information2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.
SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF LABORATORY GLASSWARE GRADUATED MEASURING CYLINDERS ACCORDING TO IS 878:2008/ISO 4788:2005 (Second Revision) DOC: STI/878/2 1.0 Laboratory - A laboratory
More informationSeite 1 von 4 Search Result ( 1-50 ) Documents found: 59 Search criteria Search scope: Stage code: 60.60 Current stage only Date stage reached: Last year Committee: TC 22 Refine your query and search again
More informationSTX-26 Stump Grinder
Form No. 3365-311 Rev B STX-26 Stump Grinder Model No. 23210 Serial No. 310000001 and Up Model No. 23210G Serial No. 310000001 and Up Register at www.toro.com. Original Instructions (EN) *3365-311* B Ordering
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationDisclosure to Promote the Right To Information
इ टरन ट म नक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information
More informationAMENDMENT NO April AIS-071(Part 2):2009. Automotive Vehicles - Control Location and Operation Requirements
AMENDMENT NO. 1 10 April 2015 TO AIS-071(Part 2):2009 Automotive Vehicles - Control Location and Operation Requirements 1. Page No. 3/13, clause 4.1, Title. Substitute following title for existing title:
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More information4A200T-E080 VALVE, ROCKER ARM GROUP
A00T-E00 VALVE, ROCKER ARM GROUP - - REF. NO 0 PART. NO E60- DESCRIPTION VALVE, INLET DK55 DK55-AU DK55-EU Q TY DK55-EN DK55C DK55C-AU DK55C-EU DK55C-EN I.C REMARK 0 E6500- VALVE, EXHAUST 0 5-- SPRING,
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationProCore 648 Aerator. Model No Serial No and Up * * B. Register at Original Instructions (EN)
Form No. 3409-910 Rev B ProCore 648 Aerator Model No. 09200 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3409-910* B Ordering Replacement Parts To order replacement
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationHydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic ports
ISO 2017 All rights reserved ISO/TC 131/SC N Date: 2017-08-18 ISO/PDTR 10946 ISO/TC 131/SC /WG 1 Secretariat: AFNOR Hydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic
More informationFor IS: (Part 4): 1987 General requirements for rims for Automotive Vehicles - Part 4 - Scooters and scooter derivative rims
AMENDMENT NO. 1 TO AIS 073 (Part 2) Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Sheet Metal Wheel Rims Method of Test and Requirements 1.0 Page No. III, Introduction: Substitute AIS
More informationAutomotive CNG/LPG Vehicles Test Method to Evaluate the Range
AIS-055 AUTOMOTIVE INDUSTRY STANDARD Automotive CNG/LPG Vehicles Test Method to Evaluate the Range PRINTED BY: THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 412 004 ON BEHALF OF : AUTOMOTIVE
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationDriver-Perceived Noise Level of Agricultural Tractors - Method of Measurement
AUTOMOTIVE INDUSTRY STANDARD Driver-Perceived Noise Level of Agricultural Tractors - Method of Measurement PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF
More informationElectric Power Train Vehicles - Method of Measuring the Range
FINALISED DRAFT AUTOMOTIVE INDUSTRY STANDARDS Electric Power Train Vehicles - Method of Measuring the Range (Revision 1) ARAI Date of hosting on website: 4 th Last date for comments : 5 th July 2014 1
More informationDraft Indian Standard FUSIBLE PLUG FOR DISSOLVED ACETYLENE GAS CYLINDER SPECIFICATION (first revision of IS 13497) (ICS )
DRAFT STANDARD IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref: MED 16 :3/T- 14 Date: 06-01-2015 Gas Cylinders, Sectional Committee, MED 16 TO: a) The interested members of Mechanical Engineering Division
More informationAgricultural Tractors - Rear View Mirrors - Installation Requirements
AIS-114 AUTOMOTIVE INDUSTRY STANDARD Agricultural Tractors - Rear View Mirrors - Installation Requirements PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF
More informationRequirements of Ballast Mass for Agricultural Tractors
AUTOMOTIVE INDUSTRY STANDARD Requirements of Ballast Mass for Agricultural Tractors PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY STANDARDS
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationElectric Power Train Vehicles Measurement of Net Power and The Maximum 30 Minute Power
FINALISED DRAFT AUTOMOTIVE INDUSTRY STANDARDS Electric Power Train Vehicles Measurement of Net Power and The Maximum 30 Minute Power (Revision 1) ARAI Date of hosting on website : 9 th September 2014 Last
More informationWH Ford 2WD Steering System #2013/2015 Date 02/15/04 rev. 1
Phone (209) 400-7200 Fax (209) 943-7923 www.wildhorses4x4.com WH Ford 2WD Steering System #2013/2015 Date 02/15/04 rev. 1 Basic system notes: This system works on 1966-1977 Broncos with manual steering
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationElectric Power Train Vehicles Measurement of Net Power and The Maximum 30 Minute Power
AUTOMOTIVE INDUSTRY STANDARDS Electric Power Train Vehicles Measurement of Net Power and The Maximum 30 Minute Power (Revision 1) PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE
More informationRequirements of Load Platforms of Agricultural Tractors
AIS-106 AUTOMOTIVE INDUSTRY STANDARD Requirements of Load Platforms of Agricultural Tractors PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY
More informationfile://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html
C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0 ~~~5.html Page of 6 8/9/0 C60TLRZ 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0
More informationSTX-26 Stump Grinder
Form No. 3383-656 Rev B STX-26 Stump Grinder Model No. 23208 Serial No. 314000001 and Up Model No. 23208G Serial No. 314000001 and Up Register at www.toro.com. Original Instructions (EN) *3383-656* B Ordering
More informationSPARE PARTS LIST CHAIN SAWS T540XP
SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 503 55 85-10 TOOL 1 2 503 62 12-01 GREASE 1 3 501 91 14-01 GREASE GUN 1 4 522 52 11-02 COMBINATION WRENCH 1
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationON-THE-VEHICLE BRAKE LATHE
800 ON-THE-VEHICLE BRAKE LATHE Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease
More informationMAINTENANCE AND PARTS MANUAL
B U T C H E R MAINTENANCE AND PARTS MANUAL SA16 STAINLESS STEEL BAND SAW B O Y ORDER PARTS AND SERVICE FROM: Last printed 4/18/2003 8:51 AM Adjusting screw WARNING NEVER TIGHTEN BLADE BEYOND RED INDICATOR
More informationAUTOMOTIVE INDUSTRY STANDARD
AUTOMOTIVE INDUSTRY STANDARD Statutory Plates and Inscriptions for Agricultural Tractors, their Location and Method of Attachment Agricultural Tractor Identification Numbering System PRINTED BY THE AUTOMOTIVE
More informationElectric Power Train Vehicles - Method of Measuring the Range
AUTOMOTIVE INDUSTRY STANDARDS Electric Power Train Vehicles - Method of Measuring the Range (Revision 1) PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE 411 004 ON BEHALF OF
More informationCONVEYOR MANUFACTURERS ASSOCIATION OF SA LIMITED STATIC SHAFT CONVEYOR PULLEYS WITH INTERNAL BEARINGS FOR CONVEYORS
CONVEYOR MANUFACTURERS ASSOCIATION OF SA LIMITED STATIC SHAFT CONVEYOR PULLEYS WITH INTERNAL BEARINGS FOR CONVEYORS CMA MP01 Rev00 2013 Table of Contents 1 INTRODUCTION... 3 2 NORMATIVE REFERENCES... 3
More informationROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,
More informationGROB 4V-24 Parts. GrobBandSaw.com
GROB 4V- Parts GrobBandSaw.com 888-550-3116 18 19 20 21 22 5/16-18x1/2 Hex Head Cap Screw ( 14 ) 34 35 36 37 38 39 40 39 41 42 43 44 45 46 17 16 3/8-16x3/4 Hex Head Cap Screw ( 2 ) 31 30 15 5/16-18x1 Hex
More informationDisclosure to Promote the Right To Information
इ टरन ट म नक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information
More informationVM / VML COMPONENT PARTS CATALOGUE
VM / VML REFRIGERATION COMPRESSOR COMPONENT PARTS CATALOGUE Ver. 2002 HASEGAWA CONTENTS Model VM / VML Compressor Description Parts # Crankcase Component Parts External Casing Fittings Covers & Gaskets
More informationAmendment No July 2015 AIS-050: 2004
Amendment No. 2 14 July 2015 To AIS-050: 2004 Requirements for Vehicles with regard to Selection and Approval for use of Tyres for Two and Three-Wheelers 1. Title of the standard. Substitute following
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationTECHNICAL DATA - ENGINE 250/300/380 SX/MXC/EXC/EGS 98 (all models out of USA)
TECHNICAL DATA - ENGINE 250/300/380 SX/MXC/EXC/EGS 98 (all models out of USA) Engine 250 SX 250 EXC, EGS 300 EXC, EGS 380 SX 380 EXC, EGS Design Liquid-cooled single-cylinder two-stroke engine with Twin
More informationSTX-38 EFI Stump Grinder with Intelli-Sweep
Form No. 3421-244 Rev A STX-38 EFI Stump Grinder with Intelli-Sweep Model No. 23214 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-244* A Ordering Replacement Parts
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationPACIFIC Recumbent Height-Adjustable Bath System Parts Breakdown and Assembly Manual
PACIFIC Recumbent Height-Adjustable Bath System 9700 Parts Breakdown and Assembly Manual Panel 390010-1 Tubs 390011-1 or 390022-1 390748 Revision H 4/1/2014 PENNER PATIENT CARE, INC Box 523 / 101 Grant
More informationBattery Operated Vehicles - Method of Measuring the Range
AUTOMOTIVE INDUSTRY STANDARDS Battery Operated Vehicles - Method of Measuring the Range PRINTED BY : THE AUTOMOTIVE RESEARCH ASSOCIATION OFINDIA P.B. NO. 832. PUNE 411 004 ON BEHALF OF : AUTOMOTIVE INDUSTRY
More informationIntroduction of pamphlets and catalogs 1. Bearings
Introduction of pamphlets and catalogs 1. Bearings 1-1 General Bearings Large size ball & roller bearings (CAT.NO.B2002E) This catalog provides information on various large size ball and roller bearings
More information5/29/2014 3MSHY 2000 / CYLINDER CRANKCASE Yamaha Motor Corporation, U.S.A. All rights reserved.
Page 1 of 22 3MSHY 2000 / CYLINDER CRANKCASE Page 2 of 22 Part List 3MSHY 2000 / CYLINDER CRANKCASE REF - NO PART NUMBER PART NAME QUANTITY REMARKS 1 6L5-W0090-01-1S CRANK CYLINDER ASSY 1 2 6L5-15100-00-1S
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
More information5/29/2014 3MSHU 1996 / CYLINDER CRANKCASE Yamaha Motor Corporation, U.S.A. All rights reserved.
Page 1 of 22 3MSHU 1996 / CYLINDER CRANKCASE Page 2 of 22 Part List 3MSHU 1996 / CYLINDER CRANKCASE REF - NO PART NUMBER PART NAME QUANTITY REMARKS 1 6L5-W0090-01-4D CRANK CYLINDER ASSEMBLY 1 2 6L5-15100-00-94
More informationAmendment No August 2014 To AIS-070: Requirements of Temporary Cabin for Drive-Away-Chassis Configuration Vehicles
Amendment No. 1 12 August 2014 To AIS-070: Requirements of Temporary Cabin for Drive-Away-Chassis Configuration Vehicles 1. Page 1, Clause 1 Substitute following text for existing text. 1. SCOPE This standard
More informationDRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm
DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20
More informationUnit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
More information9/7/2014 T9.9ELRZ 2001 / TOP COWLING Yamaha Motor Corporation, U.S.A. All rights reserved.
T9.9ELRZ 00 Page of 56 9/7/0 T9.9ELRZ 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. T9.9ELRZ 00 Page of 56 9/7/0 Part List T9.9ELRZ 00 / TOP COWLING REF - NO PART NUMBER PART
More informationThis is trial version
Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-4 Second edition 2007-12-15 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state test cycles for different engine applications Moteurs
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145, 2008-05 ACCESSORIES BC2145, 2008-05 ACCESSORIES BC2145, 2008-05 Ref Part No Description Remark QTY KIT 1 502 21 60-13 ACCESSORY BAG 1 2 501 60 02-03
More informationPRESENTATION ON STANDARDSDISTRIBUTION TRANSFORMERS BUREAU OF INDIAN STANDARDS BHOPAL
PRESENTATION ON STANDARDSDISTRIBUTION TRANSFORMERS BUREAU OF INDIAN STANDARDS BHOPAL BIS Act WTO Principle on Standard Process for development of Indian Standard Standards on Transformers Detailed provision
More informationHACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE
HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR
More informationSpecification for Automotive Timing Belts
AUTOMOTIVE INDUSTRY STANDARDS Specification for Automotive Timing Belts PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B.NO.832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY STANDARDS COMMITTEE
More informationLIST OF MACHINERY MACHINES FOR PLATEFORMING AND PROFILEFORMING pc CNC flame cutting machine MESSER OMNIMAT L 5600 size of table:
LIST OF MACHINERY MACHINES FOR PLATEFORMING AND PROFILEFORMING 1. 1 pc CNC flame cutting machine type ESAB, EXA 4500 size of table: number of cutting heads: 3900x13500 mm 4 pcs 200 mm 2. 1 pc CNC flame
More informationDate of hosting on website: 26 th October 2017 Last date for comments: 25 th November 2017
Date of hosting on website: 26 th October 2017 Last date for comments: 25 th November 2017 CHECK LIST FOR PREPARING AUTOMOTIVE INDUSTRY STANDARD Draft AIS-146/D0 : Requirements applying to stands fitted
More informationRepair Manual and Spare Parts List
Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,
More informationCYLINDER. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER 1 J38-11102-00-00 CYLINDER HEAD ASSEMBLY. 1 2 J38-11133-09-00. GUIDE, INTAKE VALVE..... 2 3 99510-12016-00 PIN, DOWEL.............. 2 4 95811-08070-00 BOLT, FLANGE............ 3 5 95811-08045-00
More informationRemanufactured Transmissions, Spare Parts, and Kits Catalog
S6-650 Spare Parts - Gearbox Housing Group 01.010 1319 301 025 Main Housing without Check Valve 005/006/045/046/049/050 1319 301 093 Main Housing without Check Valve 083/085/084/086 1319 301 084 Main Housing
More informationPony V Page 1 of 24 Battery Mounting Bracket
5151 Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 2 of 24 Battery Mounting Bracket 2 9296 2 CABLE- battery (replaces #9223) 4 9224 1 CLIP- vent tube shield (small) 6 9826 2 NUT- hex, 5/16"-24
More informationAMENDMENT NO. 4 5 th December 2014 TO AIS-063:2005 Requirements for School Buses. Substitute following text for existing text:
AMENDMENT NO. 4 5 th December 2014 TO AIS-063:2005 Requirements for School Buses 1. Page 2/6, cl. 3.3: 3.3 Vehicle Entry: The lowest footstep height shall not be more than 300 mm from the ground and the
More informationX4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY
2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationDrawing A Cylinder, Engine pan
Drawing A Cylinder, Engine pan 1 Drawing A Cylinder, Engine pan Reference Item number Qty Description 1 4180 020 1207 1 Cylinder with piston Ø 38 mm (33.2008) 2-9, 16 2 4180 025 2002 2 Valve 3 4180 025
More informationINDEX. PAGE Adjustment mechanism for radial position of block on rotating
INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,
More informationFASGM 5025 FASGM 6030 FASGM 7530 FASGM 10030
SERIES 5025 6030 7530 10030 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes &
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More information[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]
[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)] GOVERNMENT OF INDIA MINISTRY OF FINANCE (DEPARTMENT OF REVENUE) NOTIFICATION No. 4 /2015-Central Excise (N.T.)
More informationFRP Ball Valves INSTALLATION & MAINTENANCE MANUAL
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL FRP BALL VALVES TABLE OF CONTENTS MAINTENANCE AND INSTALLATION INSTRUCTIONS 1. 2. 2.1 2.2 2.3 2.4 GENERAL...Page 1 HANDLING...1 Receiving and Storing...1
More informationSPARE PARTS LIST. CHAIN SAWS 435 E from
SPARE PARTS LIST CHAIN SAWS 435 E from 2011-05- ACCESSORIES 435 E from 2011-05- ACCESSORIES 435 E from 2011-05- Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 CARBURETOR 435 E from 2011-05-
More informationPARTS CATALOG Brush Rover RM98(US) < Table of contents > Frame 1 Transmission 15. Handle 26 Front 29 Control 33 Cover 38 Seat 45 Engine 48
OREC ISSUE NO RM98(US)-05 PARTS CATALOG Brush Rover RM98(US) < Table of contents > Frame Transmission 5 HST 4 Handle 6 Front 9 Control 33 Cover 38 Seat 45 Engine 48 OREC AMERICA,INC Updated: June.06 /5
More informationATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY
2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
More informationTABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3
More informationItem No. Part Number Description Qty
36 Frame Assembly 1 336-001 Hood 36" 1 2 100-009 Saucer Nut 4 3 300-001 Rear Deck Weldment 1 4 200-006 Nylon Nut M10 GB889-86 9 5 200-003 Hexagon Bolt M10*25 GB5783-86 12 6 100-007 Chute Deflector 1 7
More informationThe Design of Rolling Bearing Mountings PDF 1/8: Contents. Rolling Bearings
The Design of Rolling Bearing Mountings 1/8: Contents Rolling Bearings FAG OEM und Handel AG Publ. No. WL 00 200/5 EA The Design of Rolling Bearing Mountings Design Examples covering Machines, Vehicles
More informationATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY
2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 2 of 58 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211
More information