Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
|
|
- Madison Harmon
- 5 years ago
- Views:
Transcription
1 Trade: Fitter Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule steel 15cm with metric graduations Square try 10 cm. blades Caliper inside15cm. spring Caliper 15cm hermaphrodites Caliper outside 15 cm spring Divider 15cm. spring Straight Scriber 15cm Punch Centre 10cm Screw Driver 15cm Chisel cold flat 10cm Hammer ball peen 0.45 kg. With handle Hammer ball peon 0.22 kg. With handle File flat 25cm. second cut File flat 25cm. smooth File half round second cut 15cm Hacksaw frame fixed 30cm Safety goggles Dot slot punch 10 cm TOOLS INTRUMENTS AND GENERAL SHOP OUTFIT 19 Rule steel 30cm. to read metric Rule steel 60cm Straight edge 45cm steel Plat surface 45 x 45cm.CI/Granite Marking table 91x91x122cm Universal scribing block 22cm V-Block pair 7cm and 15cm with clamps Square adjustable 15cm blade Angle plate 10 x 20cm Level Spirit 15cm metal Punch letter 3mm. set Punch number set of 3mm Punch hollow 6mm to 19mm set of Punch round 3 x 4mm set of
2 33 Portable hand drill (Electric) 0 to 6mm Drill twist s/s 1.5 to 12 mm by 0.5 mm Drill twist S/S 8 to 15mm by 1/2mm Taps and dies complete set in box B.A Taps and dies complete set in box with-worth Taps and dies complete set in box 3-18 mm set of File wording 15cm smooth File knife edge 15cm. smooth File cant saw 15cm. smooth File feather edge 15cm. smooth File triangular 15cm smooth File round 20cm. second cut File square 15cm. second cut File square 25cm. second cut Feelers gauge 10 blades File triangular 20cm. second cut File flat 30cm. second cut File flat 20cm. bastard File flat 30cm. bastard File Swiss type needle set of File half round 25cm. second cut File half round 25cm. bastard File round 30cm. bastard File hand 15cm. second cut Card file Stone oil 15 x 5 x 2.5cm Stone carborandum 15x5x5x4cm Can oil 0.25 liters Pliers combination 15cm Iron soldering 350gm Lamp blow 0.55 liters Spanner whit-worth D.E. 6 to 26mm set of 10 pcs Spanner adjustable 15cm Interchangeable ratchet socket set with a 12mm driver, sized mm set of 18 socket & attachments Box spanner set 6 25mm in mm set of 8 with Tommy bar. 68 Glass magnifying 7cm
3 69 Clamp tool maker 5cm and 7.5cm set of Clamp C 5cm Clamp C 10cm Hand Reamer adjustable max mm, 12mm, 18mm, set of Hand Reamer Taper 4-9mm set of 6 or 4-7 mm set of Hand Reamer parallel 12-16mm set of Scraper flat 15cm Scraper triangular 15cm Scraper half round 15cm Chisel cold 9mm cross cut 9mm diamond Chisel cold 19mm flat Chisel cold 9mm round noze Extractor stud EZY- out Set combination 30cm Micrometer 0 2.5cm outside Micrometer mm outside Micrometer mm outside Micrometer inside 25-50mm with 25 mm test pcs Vernier caliper 20cm Vernier height gauge 30cm Vernier bevel protractor Screw pitch gauge Wire gauge, metric standard Drill twist T/S 6 to 25mm x 1.5mm Drill chuck 12mm Pipe wrench 40cm Pipe vice 100mm Adjustable pipe tap set BSP with die set cover pipe size 15,20,25,32, 38, 50 mm. 99 Wheel dresser (One for 4 units) Machine vice 10cm Machine vice 15cm Sleeve drill Morse 0-1, 1-2, Vice bench 12cm jaws Vice leg 10cm jaw Bench working 240 x 120 x 90cm Almirah 180x90x45cm 2 0
4 107 Lockers with 6 drawers (Standard size Metal rack 182x182x45cm Instructor Table Instructor Chair Black board with easel Fire extinguisher (For 4 units) Fire buckets Machine vice 100mm Wing compass 25.4cm or 30m Hand hammers 1 kg. with handle TOOLS FOR ALLIED TRADE-BLACKSMITHY 0 & SHEET METAL WORK: Hammer smith 2kg. with handle Tongs roving 350mm Tong Flat. 350mm Smith s square 45cm x 30cm Cold set rodded 25 x 200mm Hot set rodded. 25 x 200 mm Swages top & bottom 12mm/19mm, Swage block 35x35x12cm Flatters (rodded) 55mm. square Fuller top & bottom 6mm, 9mm (Pair) Anvil 50 kg Anvil Stand Shovel Trammer 30 cm Rake Quenching tank. (To be made in the Institute) Pocker Hardle Leather apron Prick punch Mallet Snips straight 25cm Setting hammers with handle Planishing hammer Snip bent 25cm Stake hatchet Stake grooving
5 144 Gauge imperial sheet MODIFIED LIST OF TOOLS FOR THE 2ND YEAR FOR FITTER TRADE 1 Gauge Slip Johnson metric set Carbide wear block 1mm 2mm Gauge snap Go and Not Go to 50mm by 5mm set of 6 pcs. 4 Gauge plug single 3 ended 5 to 55 by 5mm set pf 11 pcs. 5 Gauge telescopic up to 150mm Dial test indicator.01mm on stand Sine bar 125mm Sine bar 250mm Lathe tools H.S.S. tipped set Lathe tools bit 6mm x 75mm Lathe tools bit 7mm x 75mm Lathe tools bit 9mm x 85mm Arm strong type tool bit holder R.H Arm strong type tool bit holder L.H Arm strong type tool bit holder straight Stilson wrenches 25cm Pipe cutter 6mm to 50mm wheel type Pipe bender spool type up to 25mm with stand manually operated 20 Adjustable pipe chain tonge to take pipes up to 300mm Adjustable spanner 38cm. long Dial vernier caliper 0-200mm L.C. 0.05mm (Universal type). 23 Screw thread micrometer with interchangeable mm. Pitch anvils for checking metric threads Depth micrometer 0 100mm 0.01mm Vernier caliper with thumb block mm L.C. 0.02mm. 26 Comparator stands with dial indicator LC 0.01mm Engineer s try square (Knife-wedge) 150 mm blade Surface roughness comparison plates N1 N12 grade GENERAL MACHINERY INSTALLATIONS 0 1 #Lathe Machine all geared. 2 2 Drilling machine sensitive 0-20 mm capacity motorized
6 3 Drilling machine bench sensitive 0-12 mm capacity motorized Forge portable hand blower 38 to 45 cm Grinding Machine D.E pedestal with 2cm Dia LIST OF ADDITIONAL TOOLS FORALLIED TRADE IN WELDING 1 Transformer welding set 300 amps. continuous Welding current, with all accessories and electrode holder Welding cable to carry 400 amps with flexible rubber cover Lugs for cable Earth clamps Arc welding table (all metal top) 122cm.x12cm.x60cm 1 0 with positioner 6 Oxy-acetylene gas welding set equipment with, regulator and other accessories. 7 Gas welding table with positioner Welding torch tips of different sizes Gas lighter Trolley for gas cylinders Chipping hammer Gloves (Leather) Leather apron Spindle key for cylinder valve Welding torches 5 to 10 nozzele Welding goggles Welding helmet with colored glass Tip cleaner TOTAL 1,62,632 #Lathe Machine All geared as per the norms of DGET/QCI 1,10,000 without complete accessories. Lathe accessories 30,000/- For & for Fitter (2+2+2) - Each -02 Lathe machine is required. Contact Us for Consultancy service for opening New ITI as per latest norms of QCI and Govt of India NCVT/DGET :
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours
More informationDETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)
DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) S.No. Name of Article 1 Bench Vice 2 V block 3 Spanner Set 4 File Flat 5 Hacksaw Frame 6 Combination Set 7 Center Punch 8 Dial
More informationOFFICE OF THE PRINCIPAL ITI MALKANGIRI At-Pradhaniguda, Dist-Malkangiri Ph no
OFFICE OF THE PRINCIPAL ITI MALKANGIRI At-Pradhaniguda, Dist-Malkangiri Ph no-06861 211244 No 355 dt 19.11.13 QUOTATION CALL NOTICE Sealed Quotation are invited from the reputed firm for supply of Tools
More informationPhone:
KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY 68065. THRISSUR Phone: 0487-37076 Email : arsmannuthy@kau.in RE-TENDER NOTICE No. B/400/ dated 0/03/06 Sealed tenders are invited for
More informationList of Machinery and Equipment for M.M.V.trade (Annexure A)
List of Machinery and Equipment for M.M.V.trade (Annexure A) S.NO Name and description of article Quantity (in Nos) 1. Steel rule 15 cm inch and metric 21-No s 2. Steel rule 30 cm inch and metric -do-
More informationFACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)
FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes* N = No* R = Required * * Please use a CHECKMARK
More informationOFFICE OF THE PRINCIPAL, GOVT. INDUSTRIAL TRAINING INSTITUTE,
OFFICE OF THE PRINCIPAL, GOVT. INDUSTRIAL TRAINING INSTITUTE, MATHILI, AT/PO: MATHILI, DIST: MALKANGIRI (ODISHA) PIN-764045 Email: principalitimathili@gmail.com No 104 /ITIMathili Dated 05.05.2015 QUOTATION
More informationGOVERNMENT ITI DHANUVACHAPURA
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized HEAVY MACHINERY 1 Milling machine (vertical)size no1 with standard accessories & the
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Automotive Service Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s)
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationOFFICE OF THE PRINCIPAL INDUSTRIAL TRAINING INSTITUTE RAMPURA
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized SL No- PACKAGE NO. AMOUNT REMARK 1 PACKAGE - 1 -MEASURING TOOLS 58000 2 PACKAGE - 2-
More informationNAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No
SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas
More informationOCCUPATIONAL TOOLS AND EQUIPMENT LIST
OCCUPATIONAL TOOLS AND EQUIPMENT LIST Motor Vehicle Body Repairer (Metal and Paint) Government of Newfoundland Labrador Department of Advanced Education and Skills December 2011 Preface This document is
More informationAUTOMOTIVE MANUFACTURING
REDESIGNED MODULES FOR THE SECTOR OF AUTOMOTIVE MANUFACTURING UNDER MODULAR EMPLOYABLE SKILLS (MES) Redesigned in - 2014 By Government of India Directorate General of Employment & Training Ministry of
More informationA* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120
HAND TOOLS A*0000080001 ROPE, NYLON 1/4" FT A*0000080002 ROPE, MANILLA 1/2" FT A*0000080003 DOWELL RODS 1/4" EA A*0000080004 DOWELL RODS 3/8" EA A*0000080005 DOWELL RODS 1/2" EA A*0000080006 DOWELL RODS
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationAgricultural Technology and Mechanical Systems
Agricultural Technology and Mechanical Systems Maximum Number of Team Members 4 Number of Team Members Scored 4 Scantron Committee: Craig Canterbury Tim Cunnien Brent Ebert Jeremy Greene John Workman Ag
More informationSONIC GM Express Service Tool Kit*
SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,
More informationALLTRADE & POWERBUILT NEW PRODUCT (SOME SHELF LIFT ITEMS)
AT-020014 IMPACT WRENCH 19.2V KAWASAKI 1\10 $59.00 11 AT-040013FC PLIERS SET 2PC X-DUAL HEAD (DISPLAY) 4-8\10 $7.95 253 AT-150017 UTILITY KNIFE, FOLDING, QUICK RELEASE (DISPLAY) 20- $2.95 99 AT-150030
More informationONLY use MLR, Ast, or MST
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive
More informationLab Specifications. Automotive 2 Wheeler Repair
Lab Specifications Automotive 2 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the
More informationDirectorate of Technical Eduaction Rajasthan Jodhpur PROCUREMENT SCHEDULE FOR TOOLS,EQUIPMENTS & MACHINERY
JULY. AUG. SEP. OCT. NOV. DEC. JAN. FEB. MAR. APR. MAY. JUNE. Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized JULY. AUG. SEP. OCT. NOV.
More informationSyllabus for the Trade of Electricial Power sector (TRADE: ELECTRICIAN) Duration : Six Month First Semester Semester Code: EL: SEM I
Syllabus for the Trade of Electricial Power sector (TRADE: ELECTRICIAN) Duration : Six Month First Semester Semester Code: EL: SEM I Week Trade Practical No. 1 Implementation in the shop floor of the various
More informationTOOLS AND EQUIPMENT. C. For Specialty Tools and Equipment, the program need only have those tools for the areas being accredited.
TOOLS AND EQUIPMENT Local employer needs and the availability of funds are key factors for determining each program s structure and operation. The Program Standards recognize that not all programs have
More information80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE
3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationMARCH APRIL MAY 2007
MARCH APRIL MAY 27 ON SALE 1/3/6 UNTIL 31/5/6 OR UNTIL SOLD GARDEN CART 3 Kg CAPACITY 12 X 6 X 245mm 2 PIECE HANDLE ATTACHS TO A RIDE ON MOWER 13 PNEUMATIC WHEELS AIRLESS SPRAY GUN 1 LT/65W/24VOLT SPRAYS
More informationD Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
More information16 Spanners socket with speed handle, T-bar, ratchet and universal upto 32 mm set of 28 pieces with box
Syllabus e S.No. Mechanic Tractor LIST OF TOOLS & EQUIPMNT Name of the items Quantity of DGET norm's per Allen Key set of 2 pieces (2mm to 4mm) (5+) 2 Caliper inside 5 cm Spring 6 3 Calipers outside 5
More informationDirectorate of Employment & Training Chhattisgarh SPIU Details of Proposed Procurement under Shopping Mode
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Directorate of Employment & Training Chhattisgarh SPIU Package No. Package Name Pkg Value
More informationNEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece
EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service
More informationD Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationBerufsweltmeisterschaft Calgary - Canada 1. Sep- 6. Sep 2009
Page 1 of 14 WorldSkills Competition Berufsweltmeisterschaft 1. Sep- 6. 07 INFRASTRUCTURE CNC LIST Milling Concours Mondial des Metiers CNC Fraisage CNC Fräsen Position: Contact: Details: Email: Phone:
More informationMeasuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
More informationImpulse Buy Products. Impulse Buy Products. To order call: Fax:
1 Countertop Impulse Merchandisers 2-in-1 COB Work Flashlight PART# DESCRIPTION PACK 55080 Features hanging hook and high power magnetic base. Swivel head for directional use. Pull out head to reveal flood
More informationWhy Dynamic Toolboxes?
Why Dynamic Toolboxes? All drawers feature ball bearing slides for smooth operation Scratch and solvent resistant powder coat finish Drawer liners included Tubular lock and key for maximum security Heavy-duty
More informationNON-SPARKING SAFETY TOOLS FOR USE IN ALL ATEX ZONES
SAFETY TOOLS FOR USE IN ALL ATEX ZONES www.gruposiccis.com TOOLS CONTENTS Page INTRODUCTION... 2 HAMMERS, AXES... 3-4 WRENCHES AND ADJUSTABLE WRENCHES... 5-11 SCREWDRIVERS... 12 PUNCHES, PINS... 13 CHISELS,
More informationUNESCO / Vocational Education Erbil and Dohuk
Item Code Item Description Unit Qty Destination Intended Use Carpentry machine, multi-function (7 mini), large 06-12-00001 size set 2 06-12-00002 90 cm band saw for carpentry with full Wood turning lathe
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationAutomotive Service Tools
Automotive Service Tools Part 1 by: Ed Nutter The following document shows the tools that I use to keep my vehicle on the road. You don't have to buy all these tools at once I've been collecting them for
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More informationElectrician Construction
Lab Specifications Electrician Construction An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 Shri Narendra Modi Honourable
More informationInformation Components and Spare Parts
Components and Spare Parts For tool cabinet 111 For tool trolley 162 C Chain with locking of chain case 162 C-01/2 079735 Table board, complete with worktop 162 C-010 079780 Swivel castor, x 125 mm, complete
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationStahlwille products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Stahlwille products are available from MAYAND METICS P.O. Box 26 Owings Mills, MD 27 USA web: http://mdmetric.com Pipe cutters, Hammers, Chisels, Files, Miscellaneous tools Products are available from
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationMeeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto
Specialty tools Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto includes popular puller configurations,
More informationLab Specifications. Automotive 4 Wheeler Repair
Lab Specifications Automotive 4 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the
More informationTotal duration of course = 3 Months (12 weeks) Total training hours = 400 hrs.
1 TRAINING OBJECTIVES: In order to reduce the unemployment and poverty in the society, the curriculum is designed to impart the technical knowledge and skill to those who are literate and.can not do the
More informationEquipment available due to closure
Epec - Fabrication and Engineering Equipment available due to closure (Ends: 2017-02-15 14:00:00.0) Epec - Fabrication and Engineering Equipment available due to closure Lot 1 Renault Master CC LL 35 Dci
More information14 Piece 1/4" Dr. Standard
25507A 7 Piece 3/8 Dr. SAE U-Joint Socket Set 3/8" - 3/4" 6 Pt., Mirror chrome finish for maximum resistance against corrosion. Made of premium tool steel and precision heat-treated for maximum durability.
More informationGeneral Hand Tools (1 of 6)
General Hand Tools (1 of 6) Screwdrivers Straight-slot screwdrivers turn screws with straight slots. Phillips head screwdrivers turn screws with slots resembling a cross. General Hand Tools (2 of 6) Wrenches
More informationThe Rail Cap allows a train to travel over broken rails with up to 125mm of separation at a maximum speed of 15km/hour.
Rail Anchor Part No. 1121023 Mobile Sliding Anchor Point, ideal when working at heights Rail Cap Part No. 1121206 The Rail Cap allows a train to travel over broken rails with up to 125mm of separation
More informationAM2 Sliding Bevels Quantity Boxed P3350 Rosewood 7.1/2" 1 6 P3375 Rosewood 10.1/2" 1 6 P P3320 P3320 Polished Hardwood Mini 1 6
AM2 Sliding Bevels Quantity Boxed P3350 Rosewood 7.1/2" 1 6 P3375 Rosewood 10.1/2" 1 6 P3350 - P3320 P3320 Polished Hardwood Mini 1 6 AM9 Brick Jointer Quantity Boxed G1800 G1800 1 6 F3200 AM4 Brushes
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service ccredited to Division of Cromwell Tools Ltd Services Block 65 Chartwell Drive Wigston Leicester LE18 2FS Contact: Mr T still Tel: +44 (0)116-2572396
More informationTOOLS & EQUIPMENT. For More information:
TABLE OF CONTENTS Hand Tools...2-11, 16-21 Air Tools... 12-15 Material Handling...21 Abrasives... 22-24 Box Level 3 vials read level, plumb, and 45 Length Duty Level Measuring Tools 776001 24" 776002 48"
More information$1795 $2350 $540 $1650 $2700 $1200 BONUS! BONUS! More than 3,000 tools within our range! 295PC TOOL KIT 262PC TOOL KIT 7 DRAWER ROLL CABINET
262PC TOOL KIT 295PC TOOL KIT 9 Drawer Tool Box with BBS High Density Foam Inserts Spanner Sets Assorted Pliers Screwdriver Sets Punch & Chisel Sets Hex Key Set. Hacksaw, Hammer Plus Much More ATK79BB
More informationEDMA-CAT73-PLOMBIER-GB_cat-plombier-fr 30/11/12 09:24 Page2. to make your slate. plus a range of
EDMA-CAT73-PLOMBIER-GB_cat-plombier-fr 30/11/12 09:24 Page2 Plumber Roofer Tools A broad choice of specific tools designed to make your slate and zinc roof installation easier, plus a range of unique plumber
More informationMAY 2016 SHORT QUANTITY AND SPECIALS PRICES WAS $2.95 QTY 84 AS-GW634M 1200PSI PRESSURE WASHER 110V UL LISTED QTY 50 G USES 1/2 GLUE STICKS
MAY 06 7 FUNCTION DIGITAL MULTI-TESTER PC STRAP WRENCH SET "BOA STRAP WRENCH" 6 GRINDING STONE TRAILER DOLLY 6 LB. CAPACITY PAGE OF 5 60-GRIT QTY 8 AM-MTESTER WAS. QTY AM-BSS WAS.5 70 QTY 84 AS-GW64M WAS.5
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationequipment December January 2015 Prices do not include freight. Specifications, prices & availability are subject to change without notice.
December 2014 - January 2015 WWOORRKKSSHHOOPP equipment 3 A351.25 7 9 B006 3.95 34 1,0 4 44 85 11. W 8 68 81 53 121 M.45 5 3 3,4 L6.45 1,6 0 40 D1.25.50 159 A368 6 0 T738 19 A 34.35 70 92. 9.60 6 3 L107
More informationTkcyiqj lahkkx %& lkexzh tks dz; dh tkuh gsa lalfkk dk uke %& vks ksfxd izf k{k.k lalfkk eamyk (Upgradation +COE )
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Tkcyiqj lahkkx %& lkexzh tks dz; dh tkuh gsa isdst dk uke %& -QuhZpj isdst dzekad %&
More information1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
More informationOVERHAUL. 1. REMOVE VALVE LIFTER HINT: Arrange the valve lifter in the correct order.
ENGINE MECHNICL 1473 OVERHUL 1415F02 1. REMOVE VLVE LIFTER HINT: rrange the valve lifter in the correct order. 75601 SST Wooden Block 75602 2. REMOVE VLVE HINT: rrange the valves, inner compression springs,
More informationArticle Group 3 Work Station for dent pulling
Article Group 3 Work Station for dent pulling Article N o Description 352000 Work-Station WS 20 400V with Dinse connec. Delivery content: 1 x Transformer WS 20 with Dinse connection 1 x trolley 1 x welding
More informationMASTER TOOL CATALOGUE TOLEDO - 60 YEARS OF EXCELLENCE
MASTER TOOL CATALOGUE TOLEDO - 60 YEARS OF EXCELLENCE OUR HISTORY Founded in Sydney Australia more than 60 years ago, Toledo has become an industry leading name in quality hand tools. Today, Toledo proudly
More informationG W DISCONTINU. SERVICE TOOLS for COMPANIES, INC. HEAVY DUTY TRUCK TRANSMISSIONS AXLES TIMING BLOCKS gwtoolco.com
G & TOOL W SERVING THE GEAR INDUSTRY OVER 45 YEARS COMPANIES, INC. SERVICE TOOLS for HEAVY DUTY TRUCK TRANSMISSIONS AXLES (FULLER T-9824) G-38: INPUT SHAFT BEARING PULLER Countershaft Front Bearings (#81007)
More informationStandard program. Tool cases. ...convincing solutions. Hard top tool cases, Leather tool cases
Standard program Tool cases Hard top tool cases, Leather tool cases...convincing solutions Assortment boxes, wallets, tool cases Metal tool boxes 5 compartments, complete black powder coating Tool case
More informationDIN DIN WRENCH COMBINATION WRENCH COMBINATION WRENCH SET DOUBLE OPEN END WRENCH
1 WRENCH COMBINATION WRENCH DIN 3113 Size (inch) Chrome plated Polished jaws and rings Chrome-Vanadium steel Hardened and tempered KW0100334 ¼ 105 x 15 x 5 20 KW0100335 5 /16 125 x 20 x 5 30 KW0100336
More informationABC Awards Level 1 Award in. Automotive Studies. Multiple Choice Examination
ABC Awards Level 1 Award in Automotive Studies Multiple Choice Examination Specimen Paper TIME: 1 hour Each question is worth 1 mark. The total number of marks available is 35. This is to show the type
More informationREPAIR MANUAL URW SERIES. URW-6, 8, 9, 10 & 12 Series Repair Manual
REPAIR MANUAL URW SERIES URW-6, 8, 9, 10 & 12 Series Repair Manual Contents Page 1. Tools Needed for Repair 1 2. Disassembly and Reassembly of the Cam Casing 2-4 3. Disassembly and Reassembly of the Gear
More informationROLL ON SUMMER. Red Hot Deals $2200 $199. Tools to last a lifetime. Take 3 mates to the Test Cricket on us HOWZAT! NEW KIT! 274PC BONUS EXTRA DEEP KIT
Tools to last a lifetime ROLL ON SUMMER Sales Ends 31st Jan 2013 Red Hot Deals Take 3 mates to the Test Cricket on us HOWZAT! 2200 274PC NEW KIT! Available in 3 Colours 199 Metric & AF 10 Drw Premium Toolbox
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationAssembly & Installation Instructions
TM P R O D U C T S Assembly & Installation Instructions FOR 28 SERIES SNOWPLOW PIVOT ASSEMBLY AND FLOAT LIMITER 99103000 FOR SERIAL NUMBERS 28D100000 TO 28D100770 97100552A 1. THINK SAFETY, ALWAYS WEAR
More informationInstallation Instructions
Instructions Created by an: Inchworm Tacoma Dual Case Adapter Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools
More informationPRICE BID T Supply of various Tools & Tackles for TPS Ukai.
GUJARAT STATE ELECTRICITY CORPORATION LIMITED ISO 900:008, ISO 00:00 and OHSAS 800:007 CERTIFIED THERM AL PO WE R ST A TION, U K AI U K A I D A M 9 8 0, D I S T R I C T : T A P I Phone : 0 -, Fax : 0-00
More information:45 Pagina 5 Clamping
Clamping Clamping Wrenches The Original Heavy-Duty Pipe Wrench Ridge Tool, the world s leading manufacturer of pipe working tools, produces today millions of pipe wrenches with types and sizes to fit every
More informationQ-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Unit 9 G B Quality ssurance (Consultants)
More informationTools Online Retailer Returns - TRACY - February 16
s Online Retailer Returns - TRACY - February 16 Auction Opens: Fri, Feb 9 12:09pm PT Auction Closes: Fri, Feb 16 10:00am PT TB7000 Wheel Barrow TB7033 TB7001 Wheel Barrow TB7034 TB7002 Wheel Barrow Tub
More informationFig Variable Speed Valve Parts
5 DISASSEMBLY OF VARIABLE SPEED CONTROL VALVE (Seal Replacement with Control Valve in the Bobcat). Remove seat and seat plate (Fig. ).. Remove variable speed control lever linkage rod. 3. Remove temperature
More informationYear , Labour Department, Puducherry. Page 1 of 6
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized SCHEDULE FOR PURCHASED ITEMS GOVERNMENT OF PUDUCHERRY Government I.T.I. (Men), T.R.Pattinam,
More informationJeff Bub Auctioneer. Metal Fabricating Auction Surplus
Jeff Bub Auctioneer Metal Fabricating Auction Surplus Mitsubishi IXP laser, Accupress 80 ton press brake, Power rolls, Bridgeport mill, Dust collector, Mig welders, Rotary table, Grinder, Tooling & more
More information14 Miscellaneous tools
14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking
More informationMotor Cycle Mechanic 1
Motor Cycle Mechanic 1 Training Objective: Motor Cycle is a popular use in urban as well as rural areas throughout the country. This course aims at producing semi skilled workers who can carryout minor
More informationMatt Morgan Assistant Superintendent of Support Services. Kristine Johnston Director of Purchasing. Date: May 2, 2014
To: Matt Morgan Assistant Superintendent of Support Services From: Kristine Johnston Director of Purchasing Date: May 2, 2014 Re: Career and Technology Tools and Equipment Annual Contract #14-04-3976 The
More information$ Ex. GST $
SALE ENDS 31/12/08 LOOK INSIDE FOR MORE GREAT GIFT IDEAS! Apprentice Tool Chest 151 Piece 6 Drawer This fantastic 151 Piece Apprentice Tool Kit is ideal for the New Apprentice Including all the tools you
More informationFred V. Fowler Company Inc. AUTO TOOL CRIB
Fred V. Fowler Company Inc. AUTO TOOL CRIB DISC BRAKE MEASUREMENT VERNIER DISC BRAKE MICROMETER Sharp black graduations on satin chrome finish Range: 0.3" 1.3" Graduation:.0001" Jaw depth: 3.5" Ratchet
More informationElectricity. 3 or 4 Member Team
Electricity 3 or 4 Member Team IMPORTANT NOTE Please read thoroughly the General CDE Rules Section at the beginning of this handbook for complete rules and procedures relevant to State FFA Career Development
More informationElectricity. 3 or 4 Member Team
Electricity 3 or 4 Member Team IMPORTANT NOTE Please read thoroughly the General CDE Rules Section at the beginning of this handbook for complete rules and procedures relevant to State FFA Career Development
More informationNADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES
NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES S.No 1 Name of the Laboratory ENGINEERING PRACTICES Total Area of Lab 62.0
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2505 Lowering Spindle Assembly Installation Instructions ½ TON SILVERADO
More information