Contents INTRODUCTION...
|
|
- Mary Harrington
- 6 years ago
- Views:
Transcription
1 INTRODUCTION... xiii CHAPTER 1. FROM THE SYSTEM TO THE SOFTWARE Introduction Command/control system System Software application What is software? Different types of software The software application in its proper context Conclusion CHAPTER 2. RAILWAY STANDARDS Introduction Generic standards Introduction Safety levels History between CENELEC and the IEC CENELEC referential framework Introduction Description Implementation Software safety Safety versus availability EN standard CENELEC Introduction... 26
2 vi CENELEC and IEC Standards SSIL management Comparison of 2001 and 2011 versions Conclusion CHAPTER 3. RISK AND SAFETY INTEGRITY LEVEL Introduction Basic definitions Safety enforcement What is safety? Safety management Safety integrity Determination of the SIL SIL table Allocation of SILs SIL management Software SIL Iterative process Identification of safety requirements In IEC and IEC Risk graph LOPA Overview Conclusion CHAPTER 4. SOFTWARE ASSURANCE Introduction Prerequisites Quality assurance Introduction Quality assurance management Realization of a software application Software quality assurance plan (SQAP) Organization Typical organization Skill management Configuration management Safety assurance management Verification and validation Introduction Verification Validation
3 vii 4.8. Independent assessment Tool qualification Conclusion Appendix A: list of quality documents to be produced Appendix B: structure of a software quality assurance plan CHAPTER 5. REQUIREMENTS MANAGEMENT Introduction Requirements acquisition phase Introduction Requirements elicitation Process of analysis and documentation Verification and validation of the requirements Requirements specification Requirements characterization Characterization of requirements specification Expression of requirements Requirements validation Requirements realization Process Verification Traceability Change management Requirements management Activities Two approaches Implementation of tools Conclusion CHAPTER 6. DATA PREPARATION Introduction Recap Issue Data-parameter-based system Introduction Characterization of data
4 viii CENELEC and IEC Standards Service inhibition Overview From the system to the software Need What the CENELEC framework does not say Data preparation process Context Presentation of section 8 of the CENELEC 50128:2011 standard Data preparation process Management of the data preparation process Verification Specification phase Architecture phase Data production Integration of the application and acceptance of the tests Validation and evaluation of the application Procedure and tools for preparation of the application Development of generic software Conclusion Appendix: documentation to be produced CHAPTER 7. GENERIC APPLICATION Introduction Software application realization process Realization of a generic application Specification phase Architecture and component design phase Component design phase Coding phase Execution of component tests Software integration phase Overall software testing phase Some feedback on past experience Conclusion Appendix A: the programming language Ada Appendix B: the programming language C Introduction
5 ix The difficulty with C MISRA-C Example of a rule Appendix C: introduction to object-oriented languages Appendix D: documentation needing to be produced CHAPTER 8. MODELING AND FORMALIZATION Introduction Modeling Objectives Different types of modeling Model Use of formal techniques and formal methods Definitions UML Brief introduction to formal methods Recap Usage in the railway domain Summary Implementation of formal methods Conventional processes Process including formal methods Issues Maintenance of the software application Conclusion CHAPTER 9. TOOL QUALIFICATION Introduction Concept of qualification Issue CENELEC 50128: DO IEC ISO CENELEC 50128: Introduction Qualification file
6 x CENELEC and IEC Standards Qualification process Implementation of the qualification process Fitness for purpose Design method In case of incompatibility Code generation Version management Identification of versions Bug/defect analysis Changing versions Qualification process Qualification file Ultimately Qualification of non-commercial tools Conclusion CHAPTER 10. MAINTENANCE AND DEPLOYMENT Introduction Requirements Fault management Managing changes Deployment Issue Implementation In reality Software maintenance Issue Implementation Product line Conclusion Appendix: documentation needing to be produced CHAPTER 11. ASSESSMENT AND CERTIFICATION Introduction Evaluation Principles CENELEC 50128: Cross-acceptance Certification Product certification
7 xi Software certification Evolution management Conclusion Appendix: documentation needing to be produced CONCLUSION BIBLIOGRAPHY GLOSSARY INDEX
Fundamentals of Engineering High-Performance Actuator Systems. Kenneth W. Hummel
Fundamentals of Engineering High-Performance Actuator Systems Kenneth W. Hummel Author Name Chapter 1: Introduction...1 1.1 Fundamentals... 2 1.2 Performance... 2 1.3 Loads... 3 1.4 Constraints... 3 1.5
More informationManual for Assessing Safety Hardware
American Association of State Highway and Transportation Officials Manual for Assessing Safety Hardware 2009 vii PREFACE Effective traffic barrier systems, end treatments, crash cushions, breakaway devices,
More informationPreface... xi. A Word to the Practitioner... xi The Organization of the Book... xi Required Software... xii Accessing the Supplementary Content...
Contents Preface... xi A Word to the Practitioner... xi The Organization of the Book... xi Required Software... xii Accessing the Supplementary Content... xii Chapter 1 Introducing Partial Least Squares...
More informationfor Commercial Vehicles
Advanced Hybrid Powertrains for Commercial Vehicles By Haoran Hu Rudy Smaling Simon J. Baseley International Warrendale, Pennsylvania USA 400 Commonwealth Drive Preface Acknowledgments ix xiii Chapter
More informationIntroduction to Particulate Emissions 1. Gasoline Engine Particulate Emissions Introduction 3. References 7 About the Authors 8
contents SECTION 1 Introduction to Particulate Emissions 1 CHAPTER 1 Gasoline Engine Particulate Emissions Introduction 3 References 7 About the Authors 8 CHAPTER 2 Health Impact of Particulates from Gasoline
More informationIntroduction and a Brief History of Electric Aircraft 1
contents Preface xi CHAPTER 1 Introduction and a Brief History of Electric Aircraft 1 1.1 Background 1 1.2 Electrification Trend 2 1.3 Early Electric Flights 3 1.4 The Solar Years 4 1.5 All-Electric and
More informationContents 1 Introduction Reliability and Quality Mathematics Introduction to Reliability and Quality
Contents 1 Introduction... 1 1.1 Need for Applied Reliability and Quality... 1 1.2 Reliability and Quality History... 1 1.3 Reliability and Quality Terms and Definitions... 3 1.4 Useful Information on
More informationAn Integrated Process for FDIR Design in Aerospace
An Integrated Process for FDIR Design in Aerospace Fondazione Bruno Kessler, Trento, Italy Benjamin Bittner, Marco Bozzano, Alessandro Cimatti, Marco Gario Thales Alenia Space,France Regis de Ferluc Thales
More informationThe new EU type-approval framework for motor vehicles
AC.nl The new EU type-approval framework for motor vehicles Commission Proposal Explained 24 May 2016 Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Automotive and Mobility
More informationContents. Preface... xiii Introduction... xv. Chapter 1: The Systems Approach to Control and Instrumentation... 1
Contents Preface... xiii Introduction... xv Chapter 1: The Systems Approach to Control and Instrumentation... 1 Chapter Overview...1 Concept of a System...2 Block Diagram Representation of a System...3
More informationTABLE OF CONTENTS. Table of contents. Page ABSTRACT ACKNOWLEDGEMENTS TABLE OF TABLES TABLE OF FIGURES
Table of contents TABLE OF CONTENTS Page ABSTRACT ACKNOWLEDGEMENTS TABLE OF CONTENTS TABLE OF TABLES TABLE OF FIGURES INTRODUCTION I.1. Motivations I.2. Objectives I.3. Contents and structure I.4. Contributions
More informationCOUNCIL OF THE EUROPEAN UNION. Brussels, 11 December /3/06 REV 3 ADD 1. Interinstitutional File: 2003/ 0153(COD) ENT 84 CODEC 561
COUNCIL OF THE EUROPEAN UNION Brussels, 11 December 2006 Interinstitutional File: 2003/ 0153(COD) 9911/3/06 REV 3 ADD 1 T 84 CODEC 561 STATEMT OF THE COUNCIL'S REASONS Subject : Common Position adopted
More informationBattery Power Management
Battery Power Management for Portable Devices Yevgen Barsukov Jinrong Qian ARTECH HOUSE BOSTON LONDON artechhouse.com Contents Preface xi Acknowledgments xiii Foreword xv 1 Battery Chemistry Fundamentals
More informationUsing ERTMSFormalSpecs to model ERTMS braking curves
Using ERTMSFormalSpecs to model ERTMS braking curves Laurent Ferier (laurent@ertmssolutions.com) ERTMS SOLUTIONS Brussels Svitlana Lukicheva (svitlana@ertmssolutions.com) ERTMS SOLUTIONS Brussels Stanislas
More informationDesign, Theory, Calculations
Heavy-Duty Wheeled Vehicles: Design, Theory, Calculations By Boris N. Belousov and Sergei D. Popov INTERNATIONAL. Warrendale, Pennsylvania, USA Table of Contents Preface xi Acknowledgments xiii Symbols
More informationModel Based Design: Balancing Embedded Controls Development and System Simulation
All-Day Hybrid Power On the Job Model Based Design: Balancing Embedded Controls Development and System Simulation Presented by : Bill Mammen 1 Topics Odyne The Project System Model Summary 2 About Odyne
More informationThe IFSQN ISO Implementation Package Start Up Guide
Welcome to the IFSQN ISO 22000 Food Safety Management System Package Start Up Guide which will guide you through the contents of the package. The IFSQN ISO 22000 2018 Implementation Package includes: Food
More informationOPTIMORE - Optimised Modular Range Extender for every day customer usage AVL SCHRICK project summary
AVL SCHRICK project summary GA05 / final meeting 18./19. September 2014 Gothenburg, Sweden AVL SCHRICK work packages and deliverables overview Work Package 5 Functional Safety (WP lead) D 5.1 - Item Definition
More informationAnalysis. Techniques for. Racecar Data. Acquisition, Second Edition. By Jorge Segers INTERNATIONAL, Warrendale, Pennsylvania, USA
Analysis Techniques for Racecar Data Acquisition, Second Edition By Jorge Segers INTERNATIONAL, Warrendale, Pennsylvania, USA Preface to the Second Edition xiii Preface to the First Edition xv Acknowledgments
More informationCONTROL VALVES Guy Borden, Jr., Editor Paul G. Friedman, Style Editor
CONTROL VALVES Guy Borden, Jr., Editor Paul G. Friedman, Style Editor Table of Contents About This Series Acknowledgments Preface About the Volume Editors Contributors iii v xiii xv xvii Chapter 1 Introduction
More informationTable of Contents. Foreword...xiii. Chapter One Introduction, Objectives of the Guide...1
Table of Contents Foreword...xiii Chapter One Introduction, 9 1.1 Objectives of the Guide...1 Chapter Two Pumping System Hydraulic Characteristics, 3 2.1 System Characteristics...3 2.2 Pump Curves...9
More informationTable of Contents. Preface... Glossary...
Table of Contents Preface... Glossary... xi xv Chapter 1. Fundamentals of Testing... 1 1.1.Whyistestingnecessary?(FL1.1)... 1 1.1.1.Softwaresystemscontext... 1 1.1.2.Causesofsoftwaredefects... 3 1.1.3.
More informationAbout the authors xi. Woodhead Publishing Series in Energy. Preface
v Contents About the authors xi Woodhead Publishing Series in Energy Preface xiii xv 1 Biodiesel as a renewable energy source 1 1.1 Introduction 1 1.2 Energy policy 2 1.3 Transformation of biomass 20 1.4
More informationJay Gundlach AIAA EDUCATION SERIES. Manassas, Virginia. Joseph A. Schetz, Editor-in-Chief. Blacksburg, Virginia. Aurora Flight Sciences
Jay Gundlach Aurora Flight Sciences Manassas, Virginia AIAA EDUCATION SERIES Joseph A. Schetz, Editor-in-Chief Virginia Polytechnic Institute and State University Blacksburg, Virginia Published by the
More informationSYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN
SYLLABUS EASA 748/2012 Part-21 SUBPART F/G (FLY Course code: 004-C-P) Introduction During this course Participants will learn and revise the regulations and requirements according to EASA Part 21. Summary
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61325 First edition 1995-03 Insulators for overhead lines with a nominal voltage above 1 000 V Ceramic or glass insulator units for d.c. systems Definitions, test methods and
More informationNTRODUCTIONTO FACTS CONTROLLERS Theory, Modeling, and Applications
NTRODUCTIONTO FACTS CONTROLLERS Theory, Modeling, and Applications Kalyan K. Sen Mey Ling Sen ON POWER ENGINEERING 4NEEE IEEE Press WILEY A JOHN WILEY & SONS, INC., PUBLICATION CONTENTS Foreword Preface
More informationLIFT TRUCK POLICY AND PROGRAM
LIFT TRUCK POLICY AND PROGRAM Table of Contents 1.0 Policy Statement and Program Overview... 4 2.0 Lift Truck Applicable Legislation, Guidelines and Standards... 4 3.0 Forklift Program Requirements...
More informationCritical Chain Project Management (CCPM)
Critical Chain Project Management (CCPM) Sharing of concepts and deployment strategy Ashok Muthuswamy April 2018 1 Objectives Why did we implement CCPM at Tata Chemicals? Provide an idea of CCPM, its concepts
More informationThe Learning Outcomes are grouped into the following units:
Component Specification NFQ Level 4 Digital Tachograph Operation Skills 4N2326 1. Component Details Title Teideal as Gaeilge Award Type Code Digital Tachograph Operation Skills Scileanna Oibrithe Tacagraif
More informationAutomated Testing in Automotive Software Development using Vehicle System Simulation
Automated Testing in Automotive Software Development using Vehicle System Simulation Oliver Philipp, Martin Ehmann TESIS DYNAware GmbH, www.tesis-dynaware.com 1 Defect Rate Cost for Defect Fix Motivation:
More informationSECTION XI. Subject Interpretation File No.
SECTION XI Subject Interpretation File No. Appendix I, Supplement 9 (1995 Edition With the 1996 Addenda Through the 2005 Addenda).... XI-1-04-34 IN05-017 Appendix VIII, Qualification of Personnel With
More informationEPSRC-JLR Workshop 9th December 2014 TOWARDS AUTONOMY SMART AND CONNECTED CONTROL
EPSRC-JLR Workshop 9th December 2014 Increasing levels of autonomy of the driving task changing the demands of the environment Increased motivation from non-driving related activities Enhanced interface
More informationPreface... xii. 1. Refinery Distillation... 1
Preface... xii Chapter Breakdown... xiii 1. Refinery Distillation... 1 Process Variables... 2 Process Design of a Crude Distillation Tower... 5 Characterization of Unit Fractionation... 11 General Properties
More informationSiemens Centre of Excellence Course Plan
Siemens Skill Development Initiatives Industry Relevant Skill Development Program for Gujarat Siemens Centre of Excellence Course Plan Page 1 Table of Contents Labs in the Siemens COE... 3 Courses offered
More informationISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems
INTERNATIONAL STANDARD ISO 26867 First edition 2009-07-01 Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems Véhicules routiers Matériaux de friction
More informationGOPALAN COLLEGE OF ENGINEERING AND MANAGEMENT Department of Computer Science and Engineering COURSE PLAN
Appendix - C GOPALAN COLLEGE OF ENGINEERING AND MANAGEMENT Department of Computer Science and Engineering Academic Year: 2016-17 Semester: EVEN COURSE PLAN Semester: V Subject Code& Name: 10CS63 & Compiler
More informationArtificial-Intelligence-Based Electrical Machines and Drives
Artificial-Intelligence-Based Electrical Machines and Drives Application of Fuzzy, Neural, Fuzzy-Neural, and Genetic-Algorithm-Based Techniques Peter Vas Professor of Electrical Engineering University
More informationAIR LUBRICATION SYSTEM INSTALLATION
Guide for Air Lubrication System Installation GUIDE FOR AIR LUBRICATION SYSTEM INSTALLATION OCTOBER 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2018
More informationCenterwide System Level Procedure
5.ARC.0004.2 1 of 10 REVISION HISTORY REV Description of Change Author Effective Date 0 Initial Release J. Hanratty 7/17/98 1 Clarifications based on 7/98 DNV Audit and 6/98 Internal Audit (see DCR 98-029).
More informationITD Systems Core Partners Wave 04
ITD Systems Core Partners Wave 04 JTI-CS2-2016-CPW04-SYS Innovation Takes Off Not legally binding Network Solutions for future cockpit communications General Information Key information Topic: Networking
More informationPrinciple Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK
-GB-2017-01: Defining the requirements for a GS mark approval Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act about
More informationSafety for Autonomous Ships
Safety for Autonomous Ships What can we learn from other modes of transportation? Ocean Week, Trondheim, May 9, 2018 Stig Petersen, SINTEF Digital stig.petersen@sintef.no Funding H2020 ECSEL SafeCOP project
More informationGuide to the IET Wiring Regulations
Guide to the IET Wiring Regulations Guide to the IET Wiring Regulations 17 th Edition IET Wiring Regulations (BS 7671:2008 incorporating Amendment No. 1:2011) Electrical Contractors Association Extracts
More informationApplication of safety principles for a guidance system in public transport
Application of safety principles for a guidance system in public transport H. Schäbe TÜV Rheinland InterTraffic, Cologne, Germany H. Vis & R. Bouwman Advanced Public Transport systems, Helmond, The Netherlands
More informationIntegrated. Safety Handbook. Automotive. Ulrich Seiffert and Mark Gonter. Warrendale, Pennsylvania, USA INTERNATIONAL.
Integrated Automotive Safety Handbook Ulrich Seiffert and Mark Gonter INTERNATIONAL. Warrendale, Pennsylvania, USA Table of Contents Preface ix Chapter 1 The Need to Increase Road Safety 1 1.1 Introduction
More informationTable of Contents. 1 Introduction. 2 Power System Requirements. Preface... xi
Power Requirements in Telecommunications Plant GR-513-CORE Table of Contents Table of Contents Preface............................................ xi 1 Introduction 1.1 Reasons for GR-513-CORE, Issue 2.........................
More informationEU RO Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 7 6. APPROVAL DATE AND REVISION NUMBER... 7 7.
More informationOverview of Regulations for Autonomous Vehicles
Overview of Regulations for Autonomous Vehicles Anders Eugensson, Director, Government Affairs, Volvo Car Corporation 1 Legal Overview The legal framework affecting autonomous driving can be divided into:
More informationANALYSIS OF OVERCURRENT PROTECTION RELAY SETTINGS OF A COMMERCIAL BUILDING NURUL SYAQIRAH BINTI MOHD SUFI UNIVERSITI MALAYSIA PAHANG
ANALYSIS OF OVERCURRENT PROTECTION RELAY SETTINGS OF A COMMERCIAL BUILDING NURUL SYAQIRAH BINTI MOHD SUFI UNIVERSITI MALAYSIA PAHANG ANALYSIS OF OVERCURRENT PROTECTION RELAY SETTINGS OF A COMMERCIAL BUILDING
More informationCHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL
STANDARDS October 2017 CHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL E S 3.29 Page 1/13 PROCÉDURES DE CONTRÔLE ET CALIBRAGE DE FATIGUE BANCS D'ESSAIS DE ROUE PRÜFUNG UND KALIBRIERUNG
More informationMBD solution covering from system design to verification by real-time simulation for automotive systems. Kosuke KONISHI, IDAJ Co., LTD.
MBD solution covering from system design to verification by real-time simulation for automotive systems Kosuke KONISHI, IDAJ Co., LTD. Agenda System/Component model designs to validation Needs of co-simulation
More informationEV Integration in Smart Grids through Interoperability solutions
EVS28 KINTEX, Korea, May 3-6, 2015 EV Integration in Smart Grids through Interoperability solutions Raúl Rodríguez 1 Carlos Madina, Eduardo Zabala 1 TECNALIA, c/geldo, Ed.700, P arque Tecnológico de Bizkaia,
More informationPractical Variable Speed Drives and Power Electronics
Practical Variable Speed Drives and Power Electronics Malcolm Barnes CPEng, BSc(ElecEng), MSEE, Automated Control Systems, Perth, Australia AMSTERDAM BOSTON HEIDELBERG LONDON. NEW YORK OXFORD PARIS SAN
More informationTest & Validation Challenges Facing ADAS and CAV
Test & Validation Challenges Facing ADAS and CAV Chris Reeves Future Transport Technologies & Intelligent Mobility Low Carbon Vehicle Event 2016 3rd Revolution of the Automotive Sector 3 rd Connectivity
More informationWorkforce Development Learning Center Course Outline. Emergency Vehicle Driving FIP 3601
Revision Date: Workforce Development Learning Center Course Outline Course Title: A maximum of 30 values Course Number: State-assigned number Course Objectives: List the primary learning objectives Emergency
More informationAppendix C SIP Creditable Incentive-Based Emission Reductions Moderate Area Plan for the 2012 PM2.5 Standard
Appendix C SIP Creditable Incentive-Based Emission Reductions This page intentionally blank. Appendix C: SIP Creditable Incentive-Based Emission Reductions Appendix C: SIP Creditable Incentive-Based Emission
More informationSMSIL-4THGU-E ISSUE: 12/12 SIL-SAFETY MANUAL. Upgrade Series Actuators
SMSIL-4THGU-E ISSUE: 12/12 GB SIL-SAFETY MANUAL FOR AIR TORQUE 4 th Generation Upgrade Series Actuators GB SMSIL-4THGU-E 1) INTRODUCTION 1.1) Scope This manual contains information, safety-related characteristics
More informationSimulink as a Platform for Full Vehicle Simulation
Simulink as a Platform for Full Vehicle Simulation Mike Sasena (Product Manager) Lars Krause (Application Engineer) Ryan Chladny (Development) 2018 The MathWorks, Inc. 1 Fuel Economy Simulation 2 Vehicle
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60383-2 First edition 1993-04 Insulators for overhead lines with a nominal voltage above 1 000 V Part 2: Insulator strings and insulator sets for a.c. systems Definitions, test
More informationTump User's handbook. Life 'Extension. 4th Edition. <By. 'Heinz?. *B(och & Man H Quarts. CRC Press. Taylor& Francis Group THE FAIRMONT PRESS, INC.
Tump User's handbook Life 'Extension 4th Edition
More informationPREDICTION OF REMAINING USEFUL LIFE OF AN END MILL CUTTER SEOW XIANG YUAN
PREDICTION OF REMAINING USEFUL LIFE OF AN END MILL CUTTER SEOW XIANG YUAN Report submitted in partial fulfillment of the requirements for the award of the degree of Bachelor of Engineering (Hons.) in Manufacturing
More informationCOMPRESSOR STATION OPERATIONS
CONTENTS FIGURES AND TABLES... viii PREFACE... xi ACKNOWLEDGEMENTS... xiii CHAPTER 1. INTRODUCTION... 1 Scope and Outline... 1 Types of Stations... 2 Production Stations... 2 Storage Stations... 3 Transmission
More informationContents. 1 Introduction. 2 Equipment Cooling and EC-Classes. 3 Room Cooling (RC) and Supplemental Cooling (SC) Classes. 4 Environmental Criteria
Issue 1, December 2001 Thermal GR-3028 Preface....................................... xi The Telcordia Technologies GR Process......................... xi About GR-3028-CORE...................................
More informationCollaboration education program with AVL
Collaboration education program with AVL Jin KUSAKA, Professor, Ph.D WASEDA UNIVERSITY Job hunting (2011-2016), KUSAKA Lab. Master (past 5 years) Toyota 3 Honda 4 NISSAN 7 MAZDA 4 SUZUKI 5 (overseas 2)
More informationThe MathWorks Crossover to Model-Based Design
The MathWorks Crossover to Model-Based Design The Ohio State University Kerem Koprubasi, Ph.D. Candidate Mechanical Engineering The 2008 Challenge X Competition Benefits of MathWorks Tools Model-based
More informationVehicle Replacement Policy - Toronto Police Service
STAFF REPORT June 21, 2000 To: From: Subject: Policy and Finance Committee Chairman, Toronto Police Services Board and City Auditor Vehicle Replacement Policy - Toronto Police Service Purpose: The purpose
More information/CENELEC Phase 3/Generic Preliminary Hazard Analysis Template
Project CENELEC Phase 3 /CENELEC Phase 3/ Version: 6.0 Printed by: Holter Printed on: 22 May 2003 Generated from DOORS V5.2 Copyright (c) 2003 UIC / Euro-Interlocking Contents 1 Introduction 1 1.1 Background
More informationASTM Standard for Hit/Miss POD Analysis
ASTM Standard for Hit/Miss POD Analysis Jennifer Brown, Steve James Pratt & Whitney Rocketdyne MAPOD Working Group Meeting November 19, 2010 1 Agenda ASTM Standard General Information Scope & Rationale
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV
More informationEmbedded system design for a multi variable input operations
IOSR Journal of Engineering (IOSRJEN) ISSN: 2250-3021 Volume 2, Issue 8 (August 2012), PP 29-33 Embedded system design for a multi variable input operations Niranjan N. Parandkar, Abstract: - There are
More informationTheory and Practice of Systems Engineering in Kongsberg Projects
Theory and Practice of Systems Engineering in Kongsberg Projects by Gerrit Muller Buskerud University College e-mail: gaudisite@gmail.com www.gaudisite.nl Abstract The Systems Engineering Body of Knowledge
More informationLevel 4. Credits 61. Purpose. Replacement Information
NQF Ref 1314 Version 1 Page 1 of 6 National Certificate in Electricity Supply (Metering Technician) (Level 4) with optional strands in Low Voltage Time of Use, and High Voltage Time of Use Level 4 Credits
More informationService and operate a diesel-electric main line locomotive
Page 1 of 5 Service and operate a diesel-electric main line locomotive Level 3 Credits 5 Purpose People credited with this unit standard are able to: ensure diesel-electric main line locomotive is fit
More informationIntroduction to Requirement Management for Safety-Critical Embedded Vehicle Systems
Introduction to Requirement Management for Safety-Critical Embedded Vehicle Systems SARE-väst, Urban Ingelsson Safety-Critical Systems Competence Center urban.ingelsson@semcon.com What is functional safety?
More informationThe right utility parameter mass or footprint (or both)?
January 2013 Briefing The right utility parameter mass or footprint (or both)? Context In 2009, the EU set legally-binding targets for new cars to emit 130 grams of CO 2 per kilometer (g/km) by 2015 and
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 19880-1 First edition 2016-07-01 Gaseous hydrogen Fuelling stations Part 1: General requirements Carburant d hydrogène gazeux Stations-service Partie 1: Exigences générales
More informationUse of Flow Network Modeling for the Design of an Intricate Cooling Manifold
Use of Flow Network Modeling for the Design of an Intricate Cooling Manifold Neeta Verma Teradyne, Inc. 880 Fox Lane San Jose, CA 94086 neeta.verma@teradyne.com ABSTRACT The automatic test equipment designed
More informationOperation Barbarossa: the Complete Organisational and Statistical Analysis, and Military Simulation
Operation Barbarossa: the Complete Organisational and Statistical Analysis, and Military Simulation Volume IIB The German Armed Forces (Wehrmacht), Mobilisation and War Economy from June to December 1941
More informationFor BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS
For BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an Indian Standard) Draft Indian Standard SPECIFICATION
More information2 nd use application of battery cells: functional safety requirements
2 nd use application of battery cells: functional safety requirements Workshop: Regulatory Qualification Requirements for Battery Storages March 3 rd 2018 AGENDA Introduction of project MiBZ What means
More informationCompatibility of STPA with GM System Safety Engineering Process. Padma Sundaram Dave Hartfelder
Compatibility of STPA with GM System Safety Engineering Process Padma Sundaram Dave Hartfelder Table of Contents Introduction GM System Safety Engineering Process Overview Experience with STPA Evaluation
More informationService and operate an electric main line locomotive
Page 1 of 5 Service and operate an electric main line locomotive Level 3 Credits 5 Purpose People credited with this unit standard are able to: ensure electric main line locomotive is fit for purpose and
More informationHigh Speed Passenger Rail Interoperability in North America
High Speed Passenger Rail Interoperability in North America APTA Rail Conference - Boston Thomas Peacock Larry D. Kelterborn June15, 2011 Discussion Topics The New Transportation Vision Meaning of Interoperability
More informationDEVELOPMENT OF COMPRESSED AIR POWERED ENGINE SYSTEM BASED ON SUBARU EA71 MODEL CHEN RUI
DEVELOPMENT OF COMPRESSED AIR POWERED ENGINE SYSTEM BASED ON SUBARU EA71 MODEL CHEN RUI A project report submitted in partial fulfillment of the requirements for the award of the degree of Bachelor of
More informationACRYLICACID AND ACRYLIC ESTERS
Report No. 6A ACRYLICACID AND ACRYLIC ESTERS Supplement A by RICHARD G. DENNEY April 1967 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 16183 First edition 2002-12-15 Heavy-duty engines Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under
More informationFrom Developing Credit Risk Models Using SAS Enterprise Miner and SAS/STAT. Full book available for purchase here.
From Developing Credit Risk Models Using SAS Enterprise Miner and SAS/STAT. Full book available for purchase here. About this Book... ix About the Author... xiii Acknowledgments...xv Chapter 1 Introduction...
More informationGRAND RENEWABLE ENERGY 2018
グランド再生可能エネルギー 2018 AIST-FREA スペシャルセッション 国際会議 GRAND RENEWABLE ENERGY 2018 AIST-FREA Special Session 2018/6/20 パシフィコ横浜会議センターにて AIST-FREA Session, Room 501 International Workshop: Challenges to Renewable
More informationCOMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX implementing Regulation (EU) No 595/2009 of the European Parliament and of the Council as regards the determination
More informationChoctaw Nation of Oklahoma Fleet Safety Program
Choctaw Nation of Oklahoma Fleet Safety Program Fleet Safety Program Table of Contents I. Objective II. Scope III. Responsibilities IV. Training V. Implementation VI. Vehicle Inspection VII. Driving Safely
More informationTools and Techniques for Ensuring Automotive EMC Performance and Reliability
Tools and Techniques for Ensuring Automotive EMC Performance and Reliability Todd Hubing Michelin Professor of Vehicular Electronics Clemson University Automobiles are Complex Electronic Systems Navigation
More informationUNCLASSIFIED: Distribution Statement A. Approved for public release.
April 2014 - Version 1.1 : Distribution Statement A. Approved for public release. INTRODUCTION TARDEC the U.S. Army s Tank Automotive Research, Development and Engineering Center provides engineering and
More informationCETOP POSITION PAPER PP 07
CETOP POSITION PAPER PP 07 MACHINERY DIRECTIVE 2006/42/EC Valid since 26 th May 2010 CETOP General Secretariat Lyoner Straße 18 D-60528 Frankfurt am Main Phone: +49 69 6603 1201 Fax: +49 69 6603 2201 E-mail:
More informationOutlook for Marine Bunkers and Fuel Oil to A key to understanding the future of marine bunkers and fuel oil markets
Outlook for Marine Bunkers and Fuel Oil to 2035 A key to understanding the future of marine bunkers and fuel oil markets 01 FGE & MECL 2014 Study completed by FGE and MECL FGE London FGE House 133 Aldersgate
More informationFINAL PROJECT RESEARCH PAPER
FINAL PROJECT COMPARISON ANALYSIS OF ENGINE PERFOMANCE BETWEEN CONVENTIONAL ENGINE (CARBURETOR) SYSTEM AND ELECTRONIC FUEL INJECTION (EFI) ENGINE SYSTEM OF TOYOTA KIJANG SERIES 7K-E RESEARCH PAPER Submitted
More informationQuality Improvement of Photovoltaic Testing Laboratories in Developing Countries
Quality Improvement of Photovoltaic Testing Laboratories in Developing Countries Gobind H. Atmaram James D. Roland Florida Solar Energy Center Cocoa, Florida, USA Copyright 2001 The International Bank
More informationSafety Assessment & Approval System of Shanghai Maglev Demonstration Line and its Practice
Safety Assessment & Approval System of Shanghai Maglev Demonstration Line and its Practice Wu Tao Shanghai High-Speed Transrapid Project Construction Headquarters, 2520 Long Yang Road, Pudong, 201204,
More informationThe Economics of UN Peacekeeping
A/558534 The Economics of UN Peacekeeping Nadege Sheehan i J Routledge S j ^ Taylor & Francis Croup LONDON AND NEW YORK List of figures, tables and boxes List of acronyms xi xiv Introduction 1 1 Theoretical
More informationGUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007
GUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007 AMERICAN GLOVEBOX SOCIETY STANDARDS DEVELOPMENT COMMITTEE All Rights Reserved Copyright 2007 No portion may be duplicated without written consent
More information