SWITCH BLADE PART'S MANUAL. 5 ft. & 6 ft. Sickle Bar Mower Model With Hydraulic Break-A-Way

Size: px

Start display at page:

Download "SWITCH BLADE PART'S MANUAL. 5 ft. & 6 ft. Sickle Bar Mower Model With Hydraulic Break-A-Way"

Margery Todd
5 years ago
Views:

Published 02/05 SWITCH BLADE 5 ft. & 6 ft.

Operator's Manual was shipped with the equipment in the Manual Canister.

must be maintained with the unit at all times.

1 Published 02/05 SWITCH BLADE 5 ft. & 6 ft. Sickle Bar Mower Model With Hydraulic Break-A-Way PART'S MANUAL P/N P An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Alamo Industrial ( ) to obtain a Free copy before operating the equipment. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc.

3 TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain.

5 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part. 4. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. NOTE: Please refer to The Safety Section in the front of this Manual for the proper Part Number when ordering Replacement Safety Decals. For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc. Parts Section - 1

6 Parts Section - 2 PARTS SECTION

7 PART NAME INDEX CARRIAGE ARM ASY - LH WING - P/N CARRIAGE ARM ASY - RH WING - P/N COMMON COMPONENT BOX - RH SINGLE WING - P/N COMMON COMPONENT BOX - LH DUAL WINGS - P/N CONTROL VALVE REMOTE CABLES ASY CONTROL VALVE ASY W/O FITTINGS P/N CONTROL VALVE ASY W/ FITTING CYLINDER ASY - BAR TILT - P/N A CYLINDER ASY - CURB LIFT - P/N A DECALS - CAB & ROPS DECALS - FRAME AND TANK DIVERTER VALVE - P/N MOTOR CONTROL - LH DUAL WING DIVERTER VALVE - P/N CYLINDER CONTROL - LH DUAL WING DIVERTER VALVES & LH DUAL WING HYDRAULIC DIAGRAM - RH SINGLE WING HYDRAULIC TANK ASSEMBLY P/N KNIFE DRIVE ASSEMBLY P/N MOTOR ASSEMBLY P/N MOTOR VALVE CONTROL SOLENOID ASY P/N PUMP ASY - P/N S/N SWB (09-04) & DOWN PUMP ASY - P/N A - S/N SWB (10-04) & UP PUMP ASY - P/N S/N SWB (09-04) & DOWN PUMP ASY - P/N A - S/N SWB (10-04) & UP SHOE,DRIVE & BREAKAWAY - LH MOUNTED ASY P/N SHOE,DRIVE & BREAKAWAY - RH MOUNTED ASY P/N SKID SHOE & BREAKAWAY PRE-ASY - LH MOUNTED P/N SKID SHOE & BREAKAWAY PRE-ASY - RH MOUNTED P/N WIRE HARNESS ASY - P/N RH SINGLE WING WIRE HARNESS ASY - P/N LH DUAL WING CUTTER BAR ASY - LH WING - P/N CUTTER BAR ASY - RH WING - P/N KNIFE BAR ASY - LH WING - P/N KNIFE BAR ASY - RH WING - P/N CUTTER BAR ASY - LH WING - P/N CUTTER BAR ASY - RH WING - P/N KNIFE BAR ASY - LH WING - P/N KNIFE BAR ASY - RH WING - P/N Alamo Group Inc. Parts Section 3

8 COMMON COMPONENT BOX - RH SINGLE WING - P/N Alamo Group Inc. Parts Section 4

9 COMMON COMPONENT BOX - RH SINGLE WING - P/N COMMON COMPONENT BOX RH SINGLE WING * DECAL, PELIGRO (NOT SHOWN MOUNT IN CAB OR ON FENDER) PUSH PULL SWITCH ( W/ ITEM # 3 ) SWITCH KNOB ( REPLACEMENT PART ) FACE NUT ( REPLACEMENT PARTS ) JAM NUT ( REPLACEMENT PARTS ) * DECAL, PROPER ENGINE OPERATING (NOT SHOWN MOUNT IN CAB OR ON FENDER) * DECAL, KNIFE CLEARANCE (NOT SHOWN MOUNT IN CAB OR ON FENDER) FILTER ELEMENT WIRE HARNESS DECAL, VALVE & SWITCH OPERATION POSITION TOGGLE SWITCH HYDRAULIC TANK ASY. ( INCLUDES ITEM # 18 ) VALVE ASY. 2 SPOOL W/ FITTINGS TOGGLE SWITCH BOOT COVER DECAL, REVERSING SWITCH INSTRUCTION * DECAL, WARNING SIGN (NOT SHOWN MOUNT IN CAB OR ON FENDER) A 1 SB5/6 OPERATORS MANUAL ASY BREAK-A-WAY VALVE KIT ( CONSIST OF NEXT 6 ITEMS ) VALVE BODY CARTRIDGE RELIEF PIPE PLUG HYD. ELBOW ADAPTER BOLT LOCKNUT ROTOR ACTUATOR ( NOT INCLUDED IN COMMON COMPONET BOX ) HOSE, # 8-14" LG ( TANK RETURN F/ SOLENOID TO RETURN FILTER INCLUDED IN ITEM # 10 ) HYD. TEE ADAPTER DECAL, CUTTERHEAD BREAK-A-WAY RESET INSRUCTIONS NOTE * : Some decals will be mounted in view of the operator on the cab window, tractor fender or other place where operator can see them Alamo Group Inc. Parts Section 5

10 COMMON COMPONENT BOX - LH DUAL WINGS - P/N Alamo Group Inc. Parts Section 6

11 COMMON COMPONENT BOX - LH DUAL WINGS - P/N COMMON COMPONENT BOX DUAL WINGS * DECAL, PELIGRO (NOT SHOWN MOUNT IN CAB OR ON FENDER) PUSH PULL SWITCH ( W/ ITEM # 3 ) SWITCH KNOB ( REPLACEMENT PART ) FACE NUT ( REPLACEMENT PART ) JAM NUT ( REPLACEMENT PART ) * DECAL, PROPER ENGINE OPERATING (NOT SHOWN MOUNT IN CAB OR ON FENDER) * DECAL, KNIFE CLEARANCE (NOT SHOWN MOUNT IN CAB OR ON FENDER) FILTER ELEMENT WIRE HARNESS DECAL, VALVE & SWITCH OPERATION POSITION TOGGLE SWITCH HYDRAULIC TANK ASY. ( INCLUDES ITEM # 18 ) VALVE ASY. 2 SPOOL W/ FITTINGS TOGGLE SWITCH BOOT COVER DECAL, REVERSING SWITCH INSTRUCTION * DECAL, WARNING SIGN (NOT SHOWN MOUNT IN CAB OR ON FENDER) A 1 SB5/6 OPERATORS MANUAL ASY BREAK-A-WAY VALVE KIT ( CONSIST OF NEXT 6 ITEMS ) VALVE BODY CARTRIDGE RELIEF PIPE PLUG HYD. ELBOW ADAPTER BOLT LOCKNUT ROTOR ACTUATOR ( NOT INCLUDED IN COMMON COMPONET BOX ) HOSE, # 8-14" LG ( TANK RETURN F/ SOLENOID TO RETURN FILTER INCLUDED IN ITEM # 10 ) HYD. TEE ADAPTER DIVERTER VALVE / SOLENOID, # 8 PORTS F/ MOTOR (F/ DUAL WINGS) HYD. ELBOW ADAPTER HYD. ADAPTER, STRAIGHT HYD. ADAPTER ELBOW DIVERTER VALVE / SOLENOID, # 4 PORTS F/ CYLINDERS (F/ DUAL WINGS) HYD. ELBOW ADAPTER HYD. ADAPTER STRAIGHT WIRE HARNESS, LH DUAL WINGS (NOT SHOWN) DECAL INST. LH & RH SWITCH (NOT SHOWN MOUNT IN CAB OR ON FENDER) SWITCH SPST 2-POSITION ( LH DUAL WINGS ) DECAL, CUTTER BREAK-A-WAY RESET INSTRUCTIONS NOTE * : Some decals will be mounted in view of the operator on the cab window, tractor fender or other place where operator can see them. NOTE: Some Items listed above are only used with dual LH & RH Wing Units, some items shown in drawing will be included with the RH unit. NOTE: Diverter Valves and Cylinder Control Valve will have markings on them to match the markings in the drawing Alamo Group Inc. Parts Section 7

12 HYDRAULIC TANK ASSEMBLY P/N Alamo Group Inc. Parts Section 8

13 HYDRAULIC TANK ASSEMBLY P/N HYDRAULIC TANK ASSEMBLY LOCKWASHER HYD. ADAPTER ELBOW HYD. ADAPTER STRAIGHT BOLT MAGNETIC DRAIN PLUG LOCKNUT HYD. ADAPTER ELBOW DECAL - WARNING HOSE BURST DECAL - UNIVERSAL TRACTOR GAUGE, SIGHT/TEMPERATURE VALVE SOLENOID CONTROL FILTER ASY, W/ INT FILLER/BREATHER & GAUGE SUCTION STRAINER HOSE, # 8-14"LG HYDRAULIC TANK WLD MT COVER, TANK ACCESS HYD. ADAPTER ELBOW D 1 COVER GASKET BOLT BOLT DECAL - NAME SWITCH BLADE SICKLE ELBOW, STREET WASHER, SEALING LOCKWASHER FLATWASHER BOLT CANISTER, PARTS MANUAL CA 1 CANISTER, MANUAL ASY DECAL - OPERATORS MANUAL INSIDE 2005 Alamo Group Inc. Parts Section 9

14 CARRIAGE ARM ASY - RH WING - P/N CARRIAGE ARM ASY RED LUBRICAPS GREASE FITTING COTTER PIN CARRIAGE PIN PIN ROLL ELBOW HOSE TEE SWIVEL ADAPTER CARRIAGE ARM WLD MT PIVOT MOUNT WLD MT CYLINDER LUG PIN A 1 CURB LIFT CYLINDER A 1 BAR TILT CYLINDER DECAL-MULTIPLE HAZARD DECAL, TRIUMPH LOGO NFS S/N PLATE (NOT AVAILABLE AS PARTS) SWITCHBLADE 5 & 6 HYD. BRK-A-WAY (02-05) 2006 Alamo Group Inc. Parts Section 10

15 CARRIAGE ARM ASY - LH WING - P/N CARRIAGE ARM ASY, LH WING RED LUBRICAPS GREASE FITTING COTTER PIN CARRIAGE PIN PIN ROLL ELBOW DECAL, MULTIPLE HAZARD HOSE, # 4-18" LG HYD. ADAPTER CARRIAGE ARM WLD MT, LH PIVOT MOUNT WLD MT PIN FOR CYLINDER LUGS A 1 CURB STOP CYLINDER ASY A 1 BAR LIFT CYLINDER ASY 2005 Alamo Group Inc. Parts Section 11

16 SHOE,DRIVE & BREAKAWAY - RH MOUNTED ASY P/N Alamo Group Inc. Parts Section 12

17 SHOE,DRIVE & BREAKAWAY - RH MOUNTED ASY P/N SHOE, DRIVE & BREAKAWAY ASY SPACER, CUTTER BAR MOTOR COVER WLD MT ROD DEFLECTOR BOLT BOLT SKID SHOE & ACTUATOR PRE-ASY HORIZONTAL KNIFE DRIVE ASY MOTOR, GEROTOR BRACKET HYDRAULIC, MOTOR ADAPTER TUBE, 4-5/8" LG TUBE, 3-3/4" LG PLOW BOLT, # SHOE BOTTOM PLOW BOLT, # NUT LOCKNUT FLATWASHER 18 5C JAM NUT LOCKNUT HYD. ADAPTER STRAIGHT HYD. ADAPTER STRAIGHT LOCKWASHER BOLT BOLT LOCKNUT FLATWASHER DECAL, GREASE FITTING INSIDE 2005 Alamo Group Inc. Parts Section 13

18 SHOE,DRIVE & BREAKAWAY - LH MOUNTED ASY P/N Alamo Group Inc. Parts Section 14

19 SHOE,DRIVE & BREAKAWAY - LH MOUNTED ASY P/N SHOE, DRIVE & BREAK-A-WAY ASY, LH MOUNT SHOE, DRIVE & BREAK-A-WAY PRE-ASY, LH MOUNT CUTTER BAR SPACER PLOW BOLT PLOW BOLT TUBE TUBE HORIZONTAL KNIFE DRIVE ASY HYD. MOTOR ADAPTER, BRKT MOTOR ASY BOLT HYD. ADAPTER STRAIGHT HYD. ADAPTER SHOE BOTTOM LOCKNUT DEFLECTOR ROD, LH 16 5C NUT NUT LOCKNUT FLATWASHER HYD. ADAPTER STRIAGHT MOTOR COVER WLD MT, LH LOCKWASHER BOLT BOLT LOCKNUT FLATWASHER DECAL - GREASE FITTING INSIDE 2005 Alamo Group Inc. Parts Section 15

20 SKID SHOE & BREAKAWAY PRE-ASY - RH MOUNTED P/N SKID SHOE & BREAK-A-WAY PRE-ASY SKID SHOE WLD MT ROTOR ACTUATOR BREAK-A-WAY PIN WLD MT LOCKWASHER BOLT RUBBER BUMPER PAD WASHER BACK PIVOT PLATE, TAPPED LOCKWASHER LOCKWASHER BOLT BOLT 2005 Alamo Group Inc. Parts Section 16

21 SKID SHOE & BREAKAWAY PRE-ASY - LH MOUNTED P/N SKIDSHOE & BREAK-A-WAY PRE-ASY. LH MOUNTED SKID SHOE WLD MT ROTOR ACTUATOR BACK PIVOT PLATE, TAPPED BREAK-A-WAY PIN WLD MT LOCKWASHER BOLT RUBBER BUMBER PAD FLATWASHER LOCKWASHER BOLT LOCKWASHER BOLT 2005 Alamo Group Inc. Parts Section 17

22 5 CUTTER BAR ASY - RH WING - P/N CUTTER BAR ASY. RH WING NUT LOCKWASHER LOCKWASHER CARRIAGE BOLT KNIFE CLIP HIGH PLOW BOLT NUT OUTER SHOE SOLE, RH CARRIAGE BOLT KNIFE CLIP CUTTER BAR, WEAR PLATE OUTER SHOE ASSEMBLY, RH PLOW BOLT WEAR PLATE OUTER ROCK GUARD, RH CENTER ROCK GUARD INNER ROCK GUARD, RH CARRIAGE BOLT 2005 Alamo Group Inc. Parts Section 18

23 5 CUTTER BAR ASY - LH WING - P/N CUTTER BAR ASY. LH WING NUT LOCKWASHER LOCKWASHER CARRIAGE BOLT KNIFE CLIP HIGH PLOW BOLT NUT OUTER SHOE SOLE, LH CARRIAGE BOLT KNIFE CLIP CUTTER BAR, WEAR PLATE OUTER SHOE ASSEMBLY PLOW BOLT WEAR PLATE OUTER ROCK GUARD CENTER ROCK GUARD INNER ROCK GUARD, LH CARRIAGE BOLT 2005 Alamo Group Inc. Parts Section 19

24 5 KNIFE BAR ASY - RH WING - P/N KNIFE BAR, ASY RH WING SERRATED KNIFE SECTION, 3" KNIFE PROTECTOR, CARDBOARD 63" INSERT NYLON DRIVE BRG CLAMP KNIFE HEAD WLD MT BOLT SECTION BOLT HEAD BOLT LOCKNUT M 1 BACKING STRIP, Alamo Group Inc. Parts Section 20

25 5 KNIFE BAR ASY - LH WING - P/N KNIFE BAR ASY, LH WING SERRATED KNIFE SECTION, 3" KNIFE PROTECTOR, CARDBOARD 63" INSERT NYLON DRIVE BRG CLAMP KNIFE HEAD WLD MT BOLT SECTION BOLT HEAD BOLT LOCKNUT M 1 BACKING STRIP, Alamo Group Inc. Parts Section 21

26 6 CUTTER BAR ASY - RH WING - P/N CUTTER BAR ASY, RH WING NUT LOCKWASHER LOCKWASHER CARRIAGE BOLT KNIFE CLIP HIGH PLOW BOLT NUT OUTER SHOE SOLE, RH WING CARRIAGE BOLT KNIFE CLIP BAR CUTTER, WEAR PLATE OUTER SHOE ASY, RH WING PLOW BOLT WEAR PLATE OUTER ROCK GUARD, RH WING CENTER ROCK GUARD INNER ROCK GUARD, RH CARRIAGE BOLT 2005 Alamo Group Inc. Parts Section 22

27 6 CUTTER BAR ASY - LH WING - P/N CUTTER BAR ASY, RH WING NUT LOCKWASHER LOCKWASHER CARRIAGE BOLT KNIFE CLIP HIGH PLOW BOLT NUT OUTER SHOE SOLE CARRIAGE BOLT KNIFE CLIP BAR CUTTER, WEAR PLATE OUTER SHOE ASSEMBLY PLOW BOLT WEAR PLATE OUTER ROCK GUARD CENTER ROCK GUARD INNER ROCK GUARD, RH CARRIAGE BOLT 2005 Alamo Group Inc. Parts Section 23

28 6 KNIFE BAR ASY - RH WING - P/N KNIFE BAR ASY, RH WING SERRATED KNIFE SECTION, 3" KNIFE PROTECTOR, CARDBOARD 63" INSERT NYLON DRIVE BRG CLAMP KNIFE HEAD WLD MT BOLT SECTION BOLT HEAD BOLT LOCKNUT BACKING STRIP, Alamo Group Inc. Parts Section 24

29 6 KNIFE BAR ASY - LH WING - P/N KNIFE BAR ASY, LH WING SERRATED KNIFE SECTION, 3" KNIFE PROTECTOR, CARDBOARD 63" INSERT NYLON DRIVE BRG CLAMP KNIFE HEAD WLD MT BOLT SECTION BOLT HEAD BOLT LOCKNUT BACKING STRIP, Alamo Group Inc. Parts Section 25

30 KNIFE DRIVE ASSEMBLY P/N KNIFE DRIVE ASY FLYWHEEL HUB ADAPTER KNIFE DRIVE STUD ASY. 4* SOCKET HEAD CAPSCREW, ( TORQUE TO 35 FT. LBS ) SUPPORT HORIZONTAL KNIFE DRIVE HEX BOLT NOTE: * Torque Bolts Item # 4 to 35 ft. lbs. Drive Assembly P/N will include items 1, 2, 3 & 4. It WILL NOT include items 5 & 6 in the assembly Alamo Group Inc. Parts Section 26

31 MOTOR ASSEMBLY P/N MOTOR GEROTOR 2.8 CID, 1" SHAFT INTERNAL DRIVE SHAFT STAR & HOUSING SET HOUSING TIE SCREW FLANGE ATTACHMENT SCREW FLANGE MOUNT THRUST BEARING RACE THRUST BEARING OUTPUT SHAFT MOTOR HOUSING PLUG SPACER PLATE END CAP 13 MA KEY * REF SEAL KIT ( INCLUDES ITEMS W / * ) 2005 Alamo Group Inc. Parts Section 27

32 PUMP ASY - P/N S/N SWB (09-04) & DOWN PUMP ASY, 1.16/0.49 CID/REV (STEEL MOUNTING FLANGE & END CAP) CONNECTING SHAFT GEAR SET GEAR SET END CAP (STEEL END CAP) MOUNTING FLANGE (STEEL MOUNTING FLANGE) GEAR HOUSING GEAR HOUSING HOUSING TIE BOLT DOWEL PIN DOWEL PIN MID SPACER PLATE THRUST BLOCK (F/ LARGE OR SMALL GEAR SECTION, Not Included In Seal Kit) WASHER REF Seal Kit (Includes Seal for Both Large and Small Gear Section)

33 PUMP ASY - P/N A - S/N SWB (10-04) & UP A -- PUMP ASY, 1.16/0.49 CID/REV (ALUMINUM MOUNTING FLANGE & END CAP) MOUNTING FLANGE, (ALUMINUM MOUNTING FLANGE) END CAP, (ALUMINUM END CAP) HOUSING, (F/ LARGE GEAR SECTION) MID SECTION SPACER PLATE HOUSING, (F/ SMALL GEAR SECTION) SEAL, BACK UP (INCLUDED N SEAL KIT) DRIVE GEAR, (LARGE GEAR) DRIVEN GEAR, (LARGE GEAR) DRIVE GEAR, (SMALL GEAR) DRIVEN GEAR, (SMALL GEAR) SHAFT SEAL, (INCLUDED IN SEAL KIT) SNAP RING THRUST BLOCK, (F/ LARGE OR SMALL GEAR SECTION, Not Included In Seal Kit) CHANNEL SEAL, (INCLUDED IN SEAL KIT) WASHER FASTENER, (173MM) NUT SECTIONAL SEAL, (INCLUDED IN SEAL KIT) PIN, DOWEL, (SHORT PIN) PIN, DOWEL, (LONG PIN) CONNECTING, SHAFT SEAL KIT, (F/ LARGE GEAR SECTION) SEAL KIT, (F/ SMALL GEAR SECTION) NOTE: Seal Kit Item 22 includes input seal (1), backup seals (2), channel seals (2) and section seal o-rings (2)or first pump section. NOTE: Seal Kit Item 23 includes backup seals (2), channel seals (2) and section seal o-rings (2)or second pump section.

34 PUMP ASY - P/N S/N SWB (09-04) & DOWN PUMP ASY, 0.98/0.37 CID/REV (STEEL END CAP & MOUNTING FLANGE) CONNECTING SHAFT GEAR SET, (SMALL GEARS) GEAR SET, (LARGE GEARS) END CAP (STEEL END CAP) MOUNTING FLANGE (STEEL MOUNTING FLANGE) GEAR HOUSING (F/ SMALL GEAR END) GEAR HOUSING (F/ LARGE GEAR END) HOUSING TIE BOLT DOWEL PIN, (F/ MOUNTING FLANGE) DOWEL PIN, (F/ GEAR HOUSINGS) MID SPACER PLATE THRUST BLOCK (F/ SMALL OR LARGE GEAR SECTION, Not Included In Seal Kit) WASHER (F/ HOUSING TIE BOLTS) REF SEAL KIT (Seal Kit for Large And Small Gear Section) 2005 Alamo Group Inc. Parts Section 30

35 PUMP ASY - P/N A - S/N SWB (10-04) & UP A -- PUMP ASY, 0.98/0.37 CID/REV (ALUMINUM MOUNTING FLANGE & END CAP) WASHER MID SPACER PLATE PIN, DOWEL PIN, DOWEL CONNECTING, SHAFT MOUNTING FLANGE (ALUMINUM MOUNTING FLANGE) END CAP ( ALUMINUM END CAP ) GEAR HOUSING, ( F/ LARGE GEAR SET ) GEAR HOUSING, ( F/ SMALL GEAR SET ) DRIVE GEAR & INPUT SHAFT ( F/ LARGE GEAR ) DRIVEN GEAR ( F/ LARGE GEAR ) DRIVE GEAR ( F/ SMALL GEAR ) DRIVEN GEAR ( F/ SMALL GEAR ) HOUSING TIE BOLT MM SNAP RING THRUST BLOCK, (F/ LARGE OR SMALL GEAR SECTION, Not Included In Seal Kit) INPUT SEAL, (INCLUDED IN SEAL KIT) SEAL KIT, (F/ LARGE GEAR SECTION) SEAL KIT, (F/ SMALL GEAR SECTION) NOTE: Seal Kit Item 18 includes input seal (1), backup seals (2), channel seals (2) and section seal o-rings (2)or first pump section. NOTE: Seal Kit Item 19 includes backup seals (2), channel seals (2) and section seal o-rings (2)or second pump section Alamo Group Inc. Parts Section 31

36 CONTROL VALVE ASY W/ FITTING VALVE ASY, W/ FITTINGS ( 2-SPOOL ) VALVE, DIRECTIONAL CONTROL HYD. ADAPTER STRAIGHT HYD. ADAPTER STRAIGHT HYD. TEE ADAPTER HYD. ADAPTER 2005 Alamo Group Inc. Parts Section 32

38 CONTROL VALVE ASY W/O FITTINGS P/N Alamo Group Inc. Parts Section 33

39 CONTROL VALVE ASY W/O FITTINGS P/N VALVE ASY, 2 SPOOL W/O FITTINGS UNLOAD PLUNGER POPPET ASY SPACER SPOOL SEAT ASY PLUG ASY PLUG ASY BUSHING LOCKOUT SPRING CAP ASY PLUG ASY BODY POPPET SEAT O-RING RETAINING RING AR WASHER AR WASHER AR WASHER WASHER CAP ASY SPRING SPRING PLUG ASY WASHER WASHER BALL SPRING SPRING CONE SPACER ADAPTER CAP AR WASHER WIPER SEAL HANDLE KIT 2005 Alamo Group Inc. Parts Section 34

40 CONTROL VALVE REMOTE CABLES ASY 2005 Alamo Group Inc. Parts Section 35

41 CONTROL VALVE REMOTE CABLES ASY LOCKNUT BOLT BOLT LOCKNUT LOCKNUT ADJUSTING YOKE END CLEVIS PIN COTTER PIN A/R CABLE, REMOTE CONTROL - 48" LG A/R CABLE, REMOTE CONTROL - 60" LG A/R CABLE, REMOTE CONTROL - 72" LG A/R CABLE, REMOTE CONTROL - 102" LG SWITCH MOUNT WLD MT ANGLE, MOUNT ANGLED SINGLE AXIS CONTROL ASY SWITCH, PUSH PULL ( W/ ITEMS 14 ) KNOB ( REPLACEMENT KNOB F/ ITEM # 13 ) JAM NUT ( REPLACEMENT F/ ITEM # 13 ) NUT ( REPLACEMNT F/ ITEM # 13 ) RELIEF VALVE ( 2500 PSI ) DECAL INSTRUCT VALVE & SWITCH POSITION TOGGLE SWITCH VALVE ASY, W/ FITTINGS BOOT, TOGGLE SWITCH COVER FLATWASHER BOLT DECAL INSTRUCTIONS, REVERSING SWITCH NOTE: Remote control cables are used on tractors w/ cabs & will be shipped w/ mount kit. Cables vary in length as to which tractor unit is for, for replacement cables match length of cables. Two cables used per unit, cables allow control valve to be mounted somewhere else & still give the operat NOTE: The above Items with the exception of Item 19, 13, 17 & 14 which are in the common box the rest of the items are sent with the mount kit for cab tractors Alamo Group Inc. Parts Section 36

42 MOTOR VALVE CONTROL SOLENOID ASY P/N VALVE SOLENOID ASY BODY RELIEF CARTRIDGE BOLT KIT 4* SOLENOID ASY STEM TUBE ASY COIL SOLENOID COIL NUT * * * CONSISTS OF REPLACEMENT PARTS; STEM TUBE,COIL SOLENOID,COIL NUT 2005 Alamo Group Inc. Parts Section 37

43 WIRE HARNESS ASY - P/N RH SINGLE WING WIRE HARNESS SINGLE WING CONNECTOR, COIL-HRSCHMANN TYPE FUSE 10 AMP, TYPE ATO NOTE: This wire harness is used with a RH Wing Mower, Wire harness will not include Push Pull Switch or Toggle Switch. NOTE: If LH Wing is used this wire harness will still be used and the LH wing harness will also be used Alamo Group Inc. Parts Section 38

44 WIRE HARNESS ASY - P/N LH DUAL WING WIRE HARNESS LH DUAL WING FUSE 10 AMP, TYPE ATO NOTE: Toggle Switch is shown for illustration only and is not included with wire harness. NOTE: This wire harness is only used when LH wing is mounted. It does not replace the RH Harness but is used with it Alamo Group Inc. Parts Section 39

45 DIVERTER VALVES & LH DUAL WING BOOT, TOGGLE SWITCH COVER DECAL, INSTUCT. LEFT & RIGHT SWITCH SWITCH, 2-POSITION "ON" & "OFF" DIVERTER VALVE & SOLENOID, # 4 PORTS HYD. ADAPTER STRAIGHT HYD. ADAPTER ELBOW DIVERTER VALVE & SOLENOID DIVERTER, # 8 PORTS HYD. ADAPTER ELBOW HYD. ADAPTER STRAIGHT HYD. ADAPTER ELBOW WIRE HARNESS, LH DUAL WINGS 2005 Alamo Group Inc. Parts Section 40

46 DIVERTER VALVE - P/N CYLINDER CONTROL - LH DUAL WING VALVE, SOLENOID DIVERTER (USE W/ DUAL WINGS) 2005 Alamo Group Inc. Parts Section 41

47 DIVERTER VALVE - P/N MOTOR CONTROL - LH DUAL WING VALVE, SOLENOID DIVERTER (USE W/ DUAL WINGS) 2005 Alamo Group Inc. Parts Section 42

48 HYDRAULIC DIAGRAM - RH SINGLE WING 2005 Alamo Group Inc. Parts Section 43

49 HYDRAULIC DIAGRAM - RH SINGLE WING A/R PUMP TANDEM GEAR, 1.16/0.49 CID A/R PUMP TANDEM GEAR, 0.98/0.37 CID HYDRAULIC TANK ASY. ( NCLUDES NEXT 4 ITEMS ) FILTER ASY SUCTION STRAINER CONTROL VALVE SOLENOID TANK WLD MT A 1 CURB STOP CYLINDER ASY A 1 BAR LIFT CYLINDER ASY BREAK-A-WAY VALVE ASY ( CONSIST OF THE FOLLOWING 6 ITEMS ) VALVE BODY ONLY PIPE PLUG HYD. ADAPTER ELBOW BOLT LOCKNUT RELIEF CARTRIDGE ( 1550 PSI SETTING ) ROTARY ACTUATOR ASY MOTOR, 2.8 CID NOTE: For dual wing hydraulic diagram see Common Component Box Page Alamo Group Inc. Parts Section 44

50 CYLINDER ASY - BAR TILT - P/N A A -- BAR LIFT CYLINDER ASY TUBE WLD MT CYL HEAD ROD WLD MT * O-RING * BACK-UP SEAL RING * ROD SEAL * ROD WIPER * WIRE RING SEAL KIT, ( * INCLUDES ITEMS 4, 5, 6, 7 & 8 ) 2005 Alamo Group Inc. Parts Section 45

51 CYLINDER ASY - CURB LIFT - P/N A A -- CURB STOP CYLINDER ASY TUBE WLD MT CYLINDER HEAD PISTON ROD WLDMT CYLINDER ROD LOCKNUT * PSP SEAL * O-RING * BACK-UP RING * ROD SEAL * NYLON WEAR RING * SNAP IN ROD SEAL * WIRE RING SEAL KIT, ( * INCLUDES ITEMS 7, 8, 9, 10, 11, 12 & 13 ) 2005 Alamo Group Inc. Parts Section 46

52 DECALS - FRAME AND TANK 2005 Alamo Group Inc. Parts Section 47

53 DECALS - FRAME AND TANK ITEM PART NO. QTY. TYPE DESCRIPTION INSTRUCTION DECAL, UNIVERSAL TRACTOR NAME DECAL, NAME SWITCH BLADE SICKLE WARNING DECAL, WARNING HOSE BURST DANGER DECAL, MULTIPLE HAZARD CAUTION DECAL, CAUTION REF S/N PLATE SERIAL NUMBER PLATE INSTRUCTION SHEET, MANUAL CANISTER DECAL PARTS CANISTER, PARTS MANUAL C 1 PARTS MANUAL OPERATORS SWITCH BLADE BOLT LOCKWASHER FLATWASHER LOCKNUT INSTRUCTION DECAL, GREASE FITTING INSIDE PARTS MOTOR / DRIVE ASY. COVER PARTS GAUGE, SIGHT / TEMPERATURE 2005 Alamo Group Inc. Parts Section 48

54 DECALS - CAB & ROPS ITEM PART NO. QTY. TYPE DESCRIPTION INSTRUCTION DECAL, KNIFE CLEARANCE INSTRUCTION DECAL, PROPER ENGINE OPERATING PELIGRO DECAL, PELIGRO WARNING DECAL, WARNING SIGN INSTRUCTION DECAL, REVERSING SWITCH INSTRUCTION DECAL, VALVE & SWITCH INSTRUCTION DECAL, CUTTER BREAK-A-WAY RESET INSTRUCTIONS SWITCH,PUSH PULL (W/ KNOB & HARDWARE) KNOB (HARDWARE F/ ) FACE NUT (HARDWARE F/ ) JAM NUT (HARDWARE F/ ) 2005 Alamo Group Inc. Parts Section 49

56 TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT ( Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER: 1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and 2. Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and 3. Ensure that each employee uses such Seatbelt while the tractor is moving; and 4. Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected area provided by the ROPS. REQUIRED OF THE OPERATOR 1. Securely fasten seatbelt if the tractor has a ROPS. 2. Where possible, avoid operating the tractor near ditches, embankments, and holes. 3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces. 4. Stay off slopes too steep for safe operation. 5. Watch where you are going - especially at row ends, on roads, and around trees. 6. Do not permit others to ride. 7. Operate the tractor smoothly - no jerky turns, starts, or stops. 8. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer. 9. When the tractor is stopped, set brakes securely and use park lock, if available. Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

58 Switch Blade 5 ft. & 6 ft (02/05) 2005 Alamo Group Inc. Printed U.S.A. Manual P/N P

SWITCH BLADE PART'S MANUAL. 5 ft. & 6 ft. Sickle Bar Mower Model With Mechanical Break-A-Way

SWITCH BLADE PART'S MANUAL. 5 ft. & 6 ft. Sickle Bar Mower Model With Mechanical Break-A-Way Published 06/04 SWITCH BLADE 5 ft. & 6 ft. Sickle Bar Mower Model With Mechanical Break-A-Way PART'S MANUAL P/N 02974374P An Operator's Manual was shipped with the equipment in the Manual Canister. This